Fortinet FortiGate 80F Series Network Security Firewall Mode d'emploi

Fortinet
Marque
Fortinet
Modèle
FortiGate 80F Series Network Security Firewall
Catégorie
Antennes réseau
Taper
Mode d'emploi
QuickStart Guide
FortiGate 80F Series
QuickStart Guide
Scan the QR Code or visit:
https://links.fortinet.com/fortiexplorer/downloads
FortiExplorer App
Rapidly provision, deploy, and monitor Security Fabric components including
FortiGate and FortiWiFi devices from your mobile. Download now for free.
Before you begin
Register your device to access FortiGuard updates, cloud management,
firmware upgrades, technical support and warranty coverage.
http://support.fortinet.com
32
December 7, 2021
Copyright© 2021 Fortinet, Inc. All rights reserved. Fortinet®, FortiGate®, FortiCare® and FortiGuard®, and certain other marks are registered
trademarks of Fortinet, Inc., in the U.S. and other jurisdictions, and other Fortinet names herein may also be registered and/or common law
trademarks of Fortinet. All other product or company names may be trademarks of their respective owners. Performance and other metrics
contained herein were attained in internal lab tests under ideal conditions, and actual performance and other results may vary. Network
variables, different network environments and other conditions may affect performance results. Nothing herein represents any binding
commitment by Fortinet, and Fortinet disclaims all warranties, whether express or implied, except to the extent Fortinet enters a binding
written contract, signed by Fortinet’s General Counsel, with a purchaser that expressly warrants that the identified product will perform
according to certain expressly-identified performance metrics and, in such event, only the specific performance metrics expressly identified
in such binding written contract shall be binding on Fortinet. For absolute clarity, any such warranty will be limited to performance in the same
ideal conditions as in Fortinet’s internal lab tests. In no event does Fortinet make any commitment related to future deliverables, features or
development, and circumstances may change such that any forward-looking statements herein are not accurate. Fortinet disclaims in full
any covenants, representations, and guarantees pursuant hereto, whether express or implied. Fortinet reserves the right to change, modify,
transfer, or otherwise revise this publication without notice, and the most current version of the publication shall be applicable.
For Product License Agreement / EULA and Warranty Terms, visit https://www.fortinet.com/content/dam/fortinet/assets/legal/EULA.pdf
This guide covers: FG-80F, FG-81F, FG-80F-Bypass, FG-80F-POE, FG-81F-POE
This document is prepared in English and French. In case of conflict between them, the English version shall prevail over the French version.
English
FortiGate 80F Series
FG-80F, FG-81F, FG-80F-BYPASS, FG-80F-POE, and FG-81F-POE
Package Contents
FortiGate Device
1x Ethernet Cable
QuickStart Guide
1x Power Cable1x DC Power Adapter
5
The Essentials
For a detailed Getting Started guide, setup and configuration information,
refer to the Admin Guide on https://docs.fortinet.com/
For contracts, licensing, product registration and account management,
contact FortiCare Support at https://www.fortinet.com/support/contact
Access our knowledge base, forums, videos and technical experts at
https://www.fortinet.com/support/support-services/forticare-support
Default Logins
https://192.168.1.99
Username: admin
Password: leave blank
Admin Guide
Customer Service
Self-service Resources
Thank you for choosing Fortinet
4
English
Additional Setup Options
Set up your Fortinet device locally or connect using forticloud.com
GUI
Ethernet Cable
Management Computer
Port 1
https://192.168.1.99
Username: admin
No Password
Note: For static IP configuration, use 192.168.1.1 with subnet mask
255.255.255.0
Console Port
Management Computer
Note: For a detailed CLI guide, visit docs.fortinet.com
USB Console Cable
(available for purchase)
CLI
FortiGate Cloud Key
1
1
1
2
2
2
3
3
3
Go to forticloud.com and login with your FortiCloud Credentials or Register
Follow the on-screen instructions, then click Add FortiGate
Enter the FortiGate Cloud Key located on the sticker of your device
(Connect a WAN port to the Internet)
Speed (default): 9600
Data bits: 8
Stop bits: 1
Parity: None
Flow Control: None
7
Quick Setup
Unpack the box, power the device, plug the Ethernet cable from a WAN port
to the Internet and launch FortiExplorer using one of the following:
3
3
Follow the on-screen instructions to complete your setup
Follow the on-screen instructions to complete your setup
1
1
1
2
2
2
FortiExplorer will automatically detect your device
If the device is not detected, navigate to My Fabric, tap Add and follow
the FortiExplorer’s on-screen instructions
Scan the FortiGate Cloud Key located on your Fortinet device
Enable Bluetooth on your Fortinet device and your mobile, then place
them near each other
Connect your mobile to your Fortinet device with a USB cable
Navigate to My Fabric, then tap Add
BLE Auto Detection
Note: FortiExplorer can manage FortiGates without WiFi capabilities once
they have been provisioned to allow HTTP/S admin access
USB Connectivity
FortiGate Cloud Key Registration
-or-
-or-
6
English
8 9
2
3
5
1
FortiGate
Green: The device is on
Off: The device is off
Green: Both power supplies are functioning
Amber: One power supply is functioning
Off: Power is off
Amber: Bypass Port Pair is active
Off: Bypass Port Pair is off
Green: Operating normally; BLE is off
Flashing Green: Booting up
Flashing Amber: BLE is on
LOGO
POWER
STATUS
BYPASS
HA
PORT
LINK/ACT
WAN
BLE/RESET Activates BLE management or restores to factory default
SFP
4
6
Green: Operating in an HA cluster
Amber: HA failover
Off: Not in an HA cluster
Flashing Green: 1000M/100M/10M data activity
Off: No link established
Flashing Green:1000M/100M/10M data activity
Off: No link established
Flashing Green: 1000M/100M/10M data activity
Off: No link established
Front - FG 80F Series
41 2 63 5





Back - FG 80F Series
7
6
4
5
8
3
2
1
Power Input 12V DC 3A, 100-240V AC 50/60Hz

 CLI management computer interface
Grounding Screw additional protective earth connection, reserved for
applications where a permanent local connection of protective earth is required
 1 Gbps Ethernet interface
 1 Gbps Ethernet interface
 1 Gbps Ethernet interface
 1 Gbps SFP interface
1 Gbps Ethernet interface
7 8
 USB 3.0 server port
SFP 1 WAN 1
WAN 2
1
2 4 6 B
3 5 A
SFP 2 – shared –
– shared –CONSOLE
USB
421 3 5 6
—BYPASS —

English
10 11

7
6
4
5
3
2
Power Input 54V DC 2.78A, 100-240V AC 50/60Hz

 CLI management computer interface
 1 Gbps Ethernet interface
 1 Gbps Ethernet interface
 1 Gbps SFP interface
1 Gbps Ethernet interface
6 7
 USB 3.0 server port
421 3 5
SFP 1 WAN 1
WAN 2
1
2 4 6 B
3 5 A
SFP 2 – shared –
– shared –CONSOLE
USB 54V 54V
1Grounding Screw additional protective earth connection, reserved for
applications where a permanent local connection of protective earth is required

2
3
5
1
FortiGate
Green: The device is on
Off: The device is off
Green: Both power supplies are functioning
Amber: One power supply is functioning
Off: Power is off
LOGO
PWR
STATUS
HA
SFP/WAN

 Activates BLE management or restores to factory default
Ports
4
Green: Operating in an HA cluster
Amber: HA failover
Off: Not in an HA cluster
Flashing Green: 1000M/100M/10M data activity
Off: No link established
Flashing Green: 1000M/100M/10M data activity
Off: No link established
Green: Operating normally; BLE is off
Flashing Green: Booting up
Flashing Amber: BLE is on
41 2 6
3 5




Red: Providing Max PoE Power, 96W
Off: PoE power available
Green: PoE power on
Off: PoE power off
HAPWR
WAN1
WAN2
5 6
SFP1
PoE
PoE
SFP2 MAX
PoE
LINK/ACT
4321 A B
STATUS
BLE / RESET
-
P
o
E
English
Guide de démarrage rapide
Série FortiGate 80F
1312
Français
This page is intentionally left blank
Cette page a été laissée blanche intentionnellement
Balayez le code QR ou rendez-vous au:
https://links.fortinet.com/fortiexplorer/downloads
FortiExplorer App
Configurez, installez et surveillez rapidement les éléments de votre Security
Fabric, dont les appareils FortiGate et FortiWiFi, à partir de votre appareil
mobile. Téléchargez l’application gratuite maintenant.
Avant de commencer
Enregistrez votre appareil pour avoir accès aux mises à jour, à la gestion
infonuagique, aux mises à niveau de micrologiciel, au soutien technique et à
la garantie de FortiGuard.
http://support.fortinet.com
1514
December 7, 2021
Copyright© 2021 Fortinet, Inc. All rights reserved. Fortinet®, FortiGate®, FortiCare® and FortiGuard®, and certain other marks are registered
trademarks of Fortinet, Inc., in the U.S. and other jurisdictions, and other Fortinet names herein may also be registered and/or common law
trademarks of Fortinet. All other product or company names may be trademarks of their respective owners. Performance and other metrics
contained herein were attained in internal lab tests under ideal conditions, and actual performance and other results may vary. Network
variables, different network environments and other conditions may affect performance results. Nothing herein represents any binding
commitment by Fortinet, and Fortinet disclaims all warranties, whether express or implied, except to the extent Fortinet enters a binding
written contract, signed by Fortinet’s General Counsel, with a purchaser that expressly warrants that the identified product will perform
according to certain expressly-identified performance metrics and, in such event, only the specific performance metrics expressly identified
in such binding written contract shall be binding on Fortinet. For absolute clarity, any such warranty will be limited to performance in the same
ideal conditions as in Fortinet’s internal lab tests. In no event does Fortinet make any commitment related to future deliverables, features or
development, and circumstances may change such that any forward-looking statements herein are not accurate. Fortinet disclaims in full
any covenants, representations, and guarantees pursuant hereto, whether express or implied. Fortinet reserves the right to change, modify,
transfer, or otherwise revise this publication without notice, and the most current version of the publication shall be applicable.
Contrat de licence de produit / CLUF et modalités de garantie: https://www.fortinet.com/content/dam/fortinet/assets/legal/EULA.pdf
Dans ce guide: FG-80F, FG-81F, FG-80F-Bypass, FG-80F-POE et FG-81F-POE
Ce document est préparé en versions anglaise et française. En cas de conflit entre eux, la version anglaise prévaudra sur la version française.
Français
Série FortiGate 80F
FG-80F, FG-81F, FG-80F-BYPASS, FG-80F-POE, and FG-81F-POE
Contenu de l’emballage
Appareil FortiGate
1 câble Ethernet
Guide de démarrage rapide
1 câble d’alimentation1 adaptateur
d’alimentation CC
17
Renseignements de base
Pour obtenir un guide de démarrage détaillé et des renseignements de
configuration, consultez le guide de gestion sur https://docs.fortinet.com/
Pour obtenir de l’aide avec les contrats, les licences, l’enregistrement de
produit et la gestion de compte, communiquez avec le service FortiCare au
https://www.fortinet.com/support/contact
Pour accéder à notre base de connaissances, à nos forums, à nos vidéos et à
nos conseils techniques d’experts, visitez le lien
https://www.fortinet.com/support/support-services/forticare-support
Identifiants par défaut
https://192.168.1.99
Username: admin
Password: (sans mot de pass)
Guide de gestion
Service à la clientèle
Ressources en libre-service
Merci d’avoir choisi Fortinet
16
Français
Autres options de configuration
Configurez l’appareil Fortinet localement ou connectez-le avec forticloud.com
GUI
Câble Ethernet
Ordinateur de gestion
Port 1
https://192.168.1.99
Username: admin
sans mot de passe
N.B.: Pour la configuration avec adresse IP fixe, utilisez
l’adresse 192.168.1.1 et le masque de sous-réseau 255.255.255.0.
Port de
console Ordinateur de gestion
N.B.: Pour obtenir un guide détaillé pour l’interface de ligne de
commande, rendez-vous sur docs.fortinet.com
Câble de console USB
(vendu séparément)
CLI
Clé infonuagique FortiGate
1
1
1
2
2
2
3
3
3
Rendez-vous sur forticloud.com et connectez-vous avec vos identifiants
FortiCloud ou inscrivez-vous
Suivez les instructions à l’écran, puis cliquez sur Add FortiGate
Entrez la clé infonuagique FortiGate inscrite sur l’étiquette de l’appareil
(Connexion à Internet avec un port WAN)
Vitesse (par défaut): 9600
Bits de données : 8
Bits d’arrêt: 1
Parité: N
Contrôle du flux: N
19
Démarrage rapide
Sortez tout le contenu de la boîte, allumez l’appareil, connectez l’appareil
à Internet en branchant le câble Ethernet sur un port WAN, et lancez
FortiExplorer avec l’une des méthodes suivantes:
3
3
Suivez les instructions à l’écran pour terminer la configuration
Suivez les instructions à l’écran pour terminer la configuration
1
1
1
2
2
2
FortiExplorer détectera automatiquement l’appareil
Si l’appareil n’est pas détecté, rendez-vous dans My Fabric, appuyez sur
Add et suivez les instructions à l’écran dans FortiExplorer
Scannez la clé infonuagique FortiGate, sur l’appareil Fortinet
Activez les fonctions Bluetooth de l’appareil Fortinet et de votre appareil
mobile, puis placez ceux-ci côte à côte
Connectez votre appareil mobile et l’appareil Fortinet avec un câble USB
Rendez-vous dans My Fabric, puis appuyez sur Add
Détection automatique BLE
N.B.: FortiExplorer peut gérer FortiGate sans fonctions Wi-Fi une fois que
l’accès d’administrateur par protocole HTTP/S est autorisé.
Connectivité USB
Enregistrement de la clé infonuagique FortiGate
-ou-
-ou-
18
Français
20 21
2
3
5
1
FortiGate
Vert: L’appareil est allumé
Éteint: L’appareil est éteint
Vert: Deux sources d’alimentation fonctionnelles
Orange: Une source d’alimentation fonctionnelle
Éteint: Aucune alimentation
Orange: Couplage de ports BYPASS activé
Éteint: Couplage de ports BYPASS désactivé
Vert: Fonctionnement normal, BLE désactivé
Vert clignotant: Démarrage
Orange clignotant: BLE activé
LOGO
POWER
STATUS
BYPASS
HA
PORT
LINK/ACT
WAN
BLE/RESET Activation de la gestion BLE ou restauration des réglages par défaut
SFP
4
6
Vert: Fonctionnement en grappe à haute disponibilité
Orange: Basculement vers la haute disponibilité
Éteint: Pas de grappe à haute disponibilité
Vert clignotant: Activité de données 1000M/100M/10M
Éteint: Aucun lien établi
Vert clignotant: Activité de données 1000M/100M/10M
Éteint: Aucun lien établi
Vert clignotant: Activité de données 1000M/100M/10M
Éteint: Aucun lien établi
Avant – Série FortiGate 80F
41 2 63 5


:

(

Arrière – Série FortiGate 80F
7
6
4
5
8
3
2
1
Alimentation 12V CC 3A, 100-240V CA 50/60Hz
(
 Ordinateur de gestion de l’interface de ligne de commande
Vis de mise à la terre : Protection supplémentaire, réservée pour les
applications où une connexion locale permanente de mise à la terre est requise
 Interface Ethernet 1 Gb/s
 Interface Ethernet 1 Gb/s
Interface Ethernet 1 Gb/s
 Interface SFP 1 Gb/s
Interface Ethernet 1 Gb/s
7 8
 Port de serveur USB 3.0
SFP 1 WAN 1
WAN 2
1
2 4 6 B
3 5 A
SFP 2 – shared –
– shared –CONSOLE
USB
421 3 5 6
—BYPASS —

Français
22 23

7
6
5
6 7
421 3 5
SFP 1 WAN 1
WAN 2
1
2 4 6 B
3 5 A
SFP 2 – shared –
– shared –CONSOLE
USB 54V 54V
1Vis de mise à la terre : Protection supplémentaire, réservée pour les
applications où une connexion locale permanente de mise à la terre est requise

2
3
5
6
1
FortiGate
Vert: L’appareil est allumé
Éteint: L’appareil est éteint
Vert: Deux sources d’alimentation fonctionnelles
Orange: Une source d’alimentation fonctionnelle
Éteint: Aucune alimentation
LOGO
PWR
STATUS
HA
SFP/WAN

BLE/RESET Activation de la gestion BLE ou restauration des réglages par défaut
Ports
4
Vert: Fonctionnement en grappe à haute disponibilité
Orange: Basculement vers la haute disponibilité
Éteint: Pas de grappe à haute disponibilité
Vert clignotant: Activité de données 1000M/100M/10M
Éteint: Aucun lien établi
Vert clignotant: Activité de données 1000M/100M/10M
Éteint: Aucun lien établi
Vert: Fonctionnement normal, BLE désactivé
Vert clignotant: Démarrage
Orange clignotant: BLE activé
41 2 6
3 5
(



Rouge: Alimentation par Ethernet maximale (96 W)
Éteint: Alimentation par Ethernet disponible
Green: Alimentation par Ethernet activé
Éteint: Alimentation par Ethernet désactivée
HAPWR
WAN1
WAN2
5 6
SFP1
PoE
PoE
SFP2 MAX
PoE
LINK/ACT
4321 A B
STATUS
BLE / RESET
-
P
o
E
Français
4
3
2 Ordinateur de gestion de l’interface de ligne de commande
 Interface SFP 1 Gb/s
Interface Ethernet 1 Gb/s
 Port de serveur USB 3.0
Alimentation 54V CC 2.78A, 100-240V CA 50/60Hz
(
 Interface Ethernet 1 Gb/s
Interface Ethernet 1 Gb/s
24 25
Cautions and Warnings
Environmental specifications
Ambient operating temperature: 0°C to 40°C
Refer to specific Product Model Data Sheet for Environmental Specifications (Operating
Temperature, Storage Temperature, Humidity, and Altitude)
Référez à la Fiche Technique de ce produit pour les caractéristiques environnementales
(Température de fonctionnement, température de stockage, humidité et l’altitude).
Safety
Battery – Risk of explosion if the battery is replaced by an incorrect type. Do not dispose
of batteries in a fire. They may explode. Dispose of used batteries according to your local
regulations. IMPORTANT: Switzerland: Annex 4.10 of SR814.013 applies to batteries.
Batterie – Risque d’explosion si la batterie est remplacée par un type incorrect. Ne jetez
pas les batteries au feu. Ils peuvent exploser. Jetez les piles usagées conformément aux
réglementations locales. IMPORTANT: Suisse: l’annexe 4.10 de SR814.013 s’appliquent
aux batteries.
警告
本電池如果更換不正確會有爆炸的危險
請依製造商說明書處理用過之電池
CAUTION:
There is a danger of explosion if a battery is incorrect replaced. Replace only with the same
or equivalent type.
Dispose batteries of according to the manufacturer’s instructions.
Disposing a battery into fire, a hot oven, mechanically crushing, or cutting it can result in
an explosion.
Leaving a battery in an extremely hot environment can result in leakage of flammable liquid,
gas, or an explosion.
If a battery is subjected to extremely low air pressure, it may result in leakage of flammable
liquid, gas, or an explosion.
WARNUNG:
Lithium-Batterie Achtung: Explosionsgefahr bei fehlerhafter Batteriewechsel. Ersetzen
Sie nur den gleichen oder gleichwertigen Typ. Batterien gemäß den Anweisungen des
Herstellers entsorgen.
Beseitigung einer BATTERIE in Feuer oder einen heißen Ofen oder mechanisches
Zerkleinern oder Schneiden einer BATTERIE, die zu einer EXPLOSION führen kann
Verlassen einer BATTERIE in einer extrem hohen Umgebungstemperatur, die zu einer
EXPLOSION oder zum Austreten von brennbarer Flüssigkeit oder Gas führen kann
Eine BATTERIE, die einem extrem niedrigen Luftdruck ausgesetzt ist, der zu einer
EXPLOSION oder zum Austreten von brennbarer Flüssigkeit oder Gas führen kann.
CAUTION: Shock Hazard. Disconnect all power sources.
ATTENTION: Risque d’électrocution. Débranchez toutes les sources d’alimentation.
This product is intended to be supplied by a Listed pluggable A via Class I external power
supply adapter by means of a power cord connected to a socket-outlet with earthing
connection.
Ce produit est destiné à être alimenté par un adaptateur d’alimentation externe de classe I
par l’intermédiaire d’un cordon d’alimentation enfichable de classe A qui doit être branché à
une prise de courant avec terre.
Caution: This equipment is to be used in a Network Environment 0 per IECTR 62101. This
product is connected only to PoE networks without routing to the outside plant.
Attention: Ce matériel doit être utilisé dans un Environnement Réseau 0 par IECTR 62101.
Ce produit est uniquement connecté aux réseaux PoE sans installation externe de routage.
Grounding — To prevent damage to your equipment, connections that enter from outside
the building should pass through a lightning / surge protector, and be properly grounded.
Use an electrostatic discharge workstation (ESD) and/or wear an anti-static wrist strap
while you work. In addition to the grounding terminal of the plug, on the back panel, there is
another, separate terminal for earthing.
Mise à la terre — Pour éviter d’endommager votre matériel, assurez-vous que les
branchements qui entrent à partir de l’extérieur du bâtiment passent par un parafoudre /
parasurtenseur et sont correctement mis à la terre. Utilisez un poste de travail de décharge
électrostatique (ESD) et / ou portez un bracelet anti-statique lorsque vous travaillez. Ce
produit possède une borne de mise à la terre qui est prévu à l’arrière du produit, à ceci
s’ajoute la mise à la terre de la prise.
This product has a separate protective earthing terminal provided on the back of the
product in addition to the grounding terminal of the attachment plug. This separate
protective earthing terminal must be permanently connected to earth with a green with
yellow stripe conductor minimum size #12AWG and the connection is to be installed by a
qualified service personnel.
Ce produit a une borne de mise à la terre séparé sur le dos de l’appareil, en plus de la
borne de mise à la terre de la fiche de raccordement. Cette borne de mise à la terre
séparée doit être connecté en permanence à la terre avec un conducteur vert avec la
taille bande jaune de minimum #12AWG et la connexion doit être installé par un personnel
qualifié.
Regulatory Notices
Federal Communication Commission (FCC) – USA
This device complies with Part 15 of FCC Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received; including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in residential installation. This equipment
generates, uses, and can radiate radio frequency energy, and if it is not installed and used
in accordance with the instruction manual, it may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
WARNING: Any changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance
of 20cm between the radiator and your body. This transmitter must not be co-located or
operating in conjunction with any other antenna or transmitter.
Industry Canada Equipment Standard for Digital Equipment
(ICES) – Canada
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Innovation, Science and Economic Development (ISED) – Canada
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation,
Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject
to the following two conditions:
1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause
undesired operation of the device.
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux
CNR d’Innovation, Sciences et Développement économique Canada applicables aux appa-
reils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes:
1. L’appareil ne doit pas produire de brouillage;
2. L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d’en compromettre le fonctionnement.
This equipment complies with ISED radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance
20cm between the radiator & your body.
Cet équipement est conforme aux limites d’exposition aux rayonnements ISED établies
pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un
minimum de 20cm de distance entre la source de rayonnement et votre corps.
The maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be
This device and it’s antennas(s) must not be co-located or operating in conjunction with
any other antenna or transmitter except in accordance with IC multi-transmitter product
procedures.
Cet appareil et son antenne (s) ne doit pas être co-localisés ou fonctionnement en associa-
tion avec une autre antenne ou transmetteur.
Model: FG-80F, FG-81F, FG-80F-Bypass
Antenna Qty Antenna Type Connector Gain (dBi) 2.4GHz
BT (Internal) 1 PIFA IPEX 1.3
IMPORTANT: The device must be professionally installed and must use the supplied
antenna.
European Conformity (CE) - EU
This is a Class B product. In a domestic environment, this product may cause radio
interference, in which case the user may be required to take adequate measures.
The product transmits within the frequency ranges and less than or equal to the power
listed below:
2402-2480MHz less than 20dBm
This equipment should be installed and operated with minimum distance 20cm between
the radiator & your body.
Simplified EU Declaration of Conformity
This declaration is only valid for Fortinet products (including combinations of software,
firmware and hardware) provided by Fortinet or Fortinet’s authorized partners to the
end-customer directly for use within the EU or countries that have implemented the EU
Directives and/or spectrum regulation. Any Fortinet products not obtained directly from
Fortinet or Fortinet’s authorized partners may not comply with EU Directives and Fortinet
makes no assurances for such products.
Български
Този продукт е в съответствие с Директива 2014/53/ЕС.
Česky
Tento produkt je v souladu se směrnicí 2014/53/EU.
Dansk
Dette produkt er i overensstemmelse med direktiv 2014/53/EU.
Deutsch
Dieses Produkt entspricht der Richtlinie 2014/53/EU.
Eesti
See toode vastab direktiivile 2014/53/EL.
English
This product is in compliance with Directive 2014/53/EU.
Español
Este producto cumple con la Directiva 2014/53/UE.
Ελληνική
Το προϊόν αυτό συμμορφώνεται με την Οδηγία 2014/53/ΕΕ.
Français
Ce produit est conforme à la Directive 2014/53/UE.
Hrvatski
Ovaj proizvod je u skladu s Direktivom 2014/53/EU.
Italiano
Questo prodotto è conforme alla Direttiva 2014/53/EU.
Latviski
Šis produkts atbilst Direktīvai 2014/53/EU.
Lietuvių
Šis gaminys atitinka direktyvą 2014/53/ES.
Malti
Dan il-prodott huwa konformi mad-Direttiva 2014/53/UE.
Magyar
Ez a termék megfelel a 2014/53/EU irányelvnek.
Nederlands
Dit product is in overeenstemming met Richtlijn 2014/53/EU.
Norsk
Dette produktet er i samsvar med direktiv 2014/53/EU.
Polski
Ten produkt jest zgodny z dyrektywą 2014/53/UE.
Português
Este produto está em conformidade com a Diretiva 2014/53/UE.
Rumunski
Acest produs este în conformitate cu Directiva 2014/53/UE.
Slovensky
Tento produkt je v súlade so smernicou 2014/53/EÚ.
Slovensko
Ta izdelek je v skladu z Direktivo 2014/53/EU.
Suomi
Tämä tuote on direktiivin 2014/53/EU mukainen.
Svenska
Denna produkt överensstämmer med direktiv 2014/53/EU.
Note: The full Declaration of Conformity for this product is available
in the link below:
https://site.fortinet.com/ProductRegulatory/EU
Voluntary Control Council for Interference (VCCI) – Japan
この装置は、クラスＢ機器です。この装置は、住宅環境で使用することを目的として
いますが、この装置がラジオやテレビジョン受信機に近接して使用されると、受信障
害を引き起こすことがあります。取扱説明書に従って正しい取り扱いをして下さい。
　　　　　　　　　　　　　　　　　　　　　　　　　　　　　ＶＣＣＩ－Ｂ
Product Safety Electrical Appliance & Material (PSE) – Japan
日本では電気用品安全法(PSE)の規定により、同梱している電源コードは本製品の専
用電源コードとして利用し、他の製品に使用しないでください。
Bureau of Standards Metrology and Inspection (BSMI) – Taiwan
The presence conditions of the restricted substance (BSMI RoHS table) are
available at the link below:
限用物質含有情況表 (RoHS Table) 請到以下 網址下載：
https://www.fortinet.com/bsmi
英屬蓋曼群島商防特網股份有限公司台灣分公司
地址：台北市內湖區行愛路176號2樓
電話：(02) 27961666
National Telecommunications Commission (NCC) – Taiwan
Model: FG-80F, FG-81F, FG-80F-Bypass, FG-80F-POE, FG-81F-POE
NCC警語
取得審驗證明之低功率射頻器材，非經核准，公司、商號或使 用者均不得擅自變更頻
率、加大功率或變更原設計之特性及功能。低功率射頻器材之使用不得影響飛航安全及
干擾合法通信；經發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。
前述合法通信，指依電信管理法規定作業之無線電通信。低功率射頻器材須忍受合法通
信或工業、科學及醫療用電波輻射性電機設備之干擾。
Model: FG-80F, FG-81F, FG-80F-Bypass
Agência Nacional de Telecomunicações (ANATEL) – Brazil
Este produto não é apropriado para uso em ambientes domésticos, pois poderá causar
interferências eletromagnéticas que obrigam o usuário a tomar medidas necessárias
para minimizar estas interferências.”
Para maiores informações, consulte o site da ANATEL www.anatel.gov.br
Model: FG-80F, FG-81F, FG-80F-Bypass
Korea Certication (KC) – Korea
A급 기기 (업무용 방송통신기자재)
이 기기는 업무용(A급) 전자파적합기기로서 판매자 또는 사용자는 이
점을 주의하시기를 바라며, 가정외의 지역에서 사용하는 것을 목적으
로 합니다.
해당무선설비기기는 운용중 전파혼신 가능성이 있으므로 인명안전과 관
련된 서비스는 할 수 없습니다.
해당무선설비기기는 운용중 전파혼신 가능성이 있음
UK Conformity Assessed (UKCA) – United Kingdom
The product transmits within the frequency ranges and less than or equal
to the power listed below:
2402-2480MHz less than 20dBm
This equipment should be installed and operated with minimum distance
20cm between the radiator & your body.
This product is in compliance with Statutory Instrument 1206 Radio
Equipment Regulations 2017
The full Declaration of Conformity for this product is available in the link
below:
https://site.fortinet.com/ProductRegulatory/UK
26 27
Fortinet.com
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15

Fortinet FortiGate 80F Series Network Security Firewall Mode d'emploi

Fortinet
Marque
Fortinet
Modèle
FortiGate 80F Series Network Security Firewall
Catégorie
Antennes réseau
Taper
Mode d'emploi
Télécharger le PDF
rapport

dans d''autres langues

Documents connexes

Autres documents