Wireless Mouse
User Guide
www.samsung.com
1
Overview
Wireless signal
receiver
The appearance of the product may difer from the igure above.
Connecting the mouse
1 Remove the wireless signal receiverfrom the bottom of the mouse
and insert it into a USB port on the computer.
Wireless signal receiver
2 Set the power switchat the bottom of the mouse to theONposition.
3 The wireless mouse connection has been completed.
If the mouse does not work, separate and reconnect the wireless
receiver, and press the Connect button on the mouse within 30
seconds.
English
Right button
Leftbuttion
Scroll wheel
LED
indicator Power
switch Connect
button
Battery
cover
2
Speciication
Items Speciications
Operating
Voltage
3VDC
Input Current 50mA
Input Voltage 3VDC
WEEE SYMBOL INFORMATION
Correct disposal of this product (Waste Electrical & Electronic
Equipment)
(Applicable in the European Union and other European countries with
separate collection systems.)
This marking on the product, accessories or literature indicates that the
product and its electronic accessories (e.g. charger, headset, USB cable)
should not be disposed of with other household waste at the end of their
working life. To prevent possible harm to the environment or human health
from uncontrolled waste disposal, please separate these items from other types of waste and
recycle them responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product, or
their local government offce, for details of where and how they can take these items for
environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase
contract. This product and its electronic accessories should not be mixed with other commercial
wastes for disposal.
English
15.19
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may causeundesired operation.
FCC 警语
15.105
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates,uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interferenceto radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment o ffand
on, the user is encouraged to tryto correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
15.21
Any changes or modifications not expressly approved by the party responsible for compliance could void the
authority to operate equipment.
This device and its antenna must not be co-located or operating in conjunction with any other antenna or
transmitter.
End-users and installers must be provided with antenna installation instructions and transmitter operating
conditions for satisfying RF exposure compliance.
For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels
is not possible
FCC RF Radiation Exposure Statement:
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment for
body-worn configuration in direct contact to the phantom.
This device complies with FCC radiation exposure limits set forth for an uncontrolled environment.
3
IC 警语
RSS-Gen Issue 4 8.4
This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two
conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including
interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible
d'en compromettre le fonctionnement.
Industry Canada ICES-003 Compliance Label:
CAN ICES-3 (*)/NMB-3(*)
* Insert either “A” or “B” but not both to identify the applicable Class of ITE.
Co-located
This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.
Cet appareil et son antenne (s) ne doivent pas être situés ou fonctionner en conjonction avec une autre antenne ou
émetteur.
IC Radiation Exposure Statement:
mobile device
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment.
4
-
1
-
2
-
3
-
4
-
5
