DHP Furniture 4009059 Manuel utilisateur

4009059(Black), 4009219(Gold)

B34400905902-KT

Date of Purchase

Metal Daybed and Trundle

S.L. - 2023/2/24

If parts are missing or damaged, we will gladly ship your

replacement parts free of charge.

Lot Number (TAKEN FROM CARTON)

Thank you for purchasing from DHP!

THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY

INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.

1

Twin/Twin

Visit www.dhpfurniture.com/eng/replacement-parts

or call Toll-Free 1-800-267-1739

You can also chat with us at www.dhpfurniture.com

Weight Limit:

Daybed:400 LBS / 181 KG

Trundle:250 LBS / 113 KG Questions, concerns, missing parts?

CONTACT OUR CUSTOMER SERVICE

DEPARTMENT BEFORE RETURNING PRODUCT

TO THE RETAILER.

2

Limited 1 year Warranty

DHP warrants this product to be free from defects in material and

workmanship and agrees to remedy any such defect. This warranty covers

one year from the date of original purchase from authorized retailers. This is

solely limited to the repair or replacement of defective parts and assembly

labor is not included.

This warranty does not apply to any product which has been improperly

assembled, subjected to misuse or abuse or which has been altered or

repaired in any way.The warranty does not cover wearing, tearing, fading or

splitting of the fabric (where applicable). Liability for consequential damages

is excluded to the extent exclusion is permitted by law. This warranty gives

you specific legal rights and you may also have other rights which vary from

state to state or province to province.

To obtain warranty service, purchaser must present original bill of sale.

Components repaired or replaced are warranted through the remainder of

the original warranty period only. The defective components will be repaired

or replaced without charge, subject to the terms and conditions described

above.

The terms and conditions of the limited warranty are subject to change

without notice. For the latest warranty policy, please visit

www.dhpfurniture.com.

Contact Us!

cs@dhpfurniture.com

Monday to Friday

Saturday

Sunday

1-800-267-1739 9 am to 9 pm (Eastern Time)

10 am to 6:30 pm (Eastern Time)

11 am to 7 pm (Eastern Time)

DHP Consumer Services

12345 Albert Hudon, Suite 100,

Montreal, Quebec H1G 3L1

For help with assembly, identifying parts, product information or to order parts,

please contact us:

Read Before Beginning Assembly

 Work in a spacious area and near where the unit will be used, preferably

on a carpet, or use a piece of the cardboard packaging to protect your floor

and product.

 Make sure all parts are included. Most parts are labeled or stamped on the

raw edge.

 Read each step carefully. It is very important that each step of the

instructions is performed in the correct order. If these steps are not followed in

sequence, assembly difficulties will occur.

 This product may contain small components. Please ensure that they are

kept away from small children.

 This product is designed for home use and is not intended for commercial

use.

www.dhpfurniture.com

Chat

with us

Chat

with us

This product is shipped in

1 carton

1.5 hour

Do NOT use

powertools

3

PARTS FOR DAYBED

S

A

B

D

I

J

O

S

T

C

Q

W

Y

4

PARTS FOR TRUNDLE

N1

O

M

E

N

W

Y

Q

5

Each part has a unique part number. Please

reference the appropriate part number when

contacting customer service for replacement

parts.

Before throwing any packaging, please

verify all contents and make sure you have

received all the parts listed above!

Leg Cap

T393370

X 4

Leg Cap

T393370

X 4

Side Rail

2 PCS

Post

1 PC

Slat

22 PCS

Slat Spacer

22 PCS

ACD

J

PARTS LIST FOR DAYBED

PART LABELS 4009059(Black) 4009219(Gold)

AT926040 T958020

BT926050 T958030

CT926060 T958040

DT926070 T958050

IT926080 T958060

TT926100 T958070

JT922140 T947170

OT919600 T945890

QT919490 T919490

YT392590 T392590

WT919480 T919480

ST925650 T946790

PART NUMBERS

OQY

B

Post

1 PC

Post

1 PC

Post

1 PC Rear Guard Rail

1 PC

Side Guard Rail

2 PCS

Ball

4 PCS

Plastic plug

44 PCS

Slat Spacer

21 PCS

W

IT

S

6

Each part has a unique part number. Please

reference the appropriate part number when

contacting customer service for replacement

parts.

Before throwing any packaging, please

verify all contents and make sure you have

received all the parts listed above!

Leg Cap

T393370

X 4

Leg Cap

T393370

X 4

Slat Spacer

19 PCS

Plastic Plug

40 PCS

EO

N

PARTS LIST FOR TRUNDLE

PART LABELS 4009059(Black) 4009219(Gold)

ET949290 T951680

MT910390 T947200

OT919600 T945890

N1 T949300 T949270

NT949310 T949280

QT919490 T919490

YT392590 T392590

WT919480 T919480

PART NUMBERS

QYW

M

Caster

2 PCS

Slat Spacer

20 PCS

Side Rail

2 PCS

End Rail

2 PCS Slat

20 PCS

Locking Caster

2 PCS

N1

7

Please do not completely tighten all the

hardware, until the entire assembly is

complete, unless otherwise indicated in the

step-by-step instructions.

The screw(s), bolt(s) to be used at each step

are shown in actual size in the lower right

corner of the page.

HARDWARE LIST FOR DAYBED

Hardware Pack

HP#: T4009219-00

4009059(Black)

4009219(Gold)

HP#: T4009059-00

1234

1/4" X 2 3/16

4 PCS

5/16" X 3/4"

8 PCS

4mm

1 PC

1/4" X 3/4''

8 PCS

8

Please do not completely tighten all the

hardware, until the entire assembly is

complete, unless otherwise indicated in the

step-by-step instructions.

The screw(s), bolt(s) to be used at each step

are shown in actual size in the lower right

corner of the page.

HARDWARE LIST FOR TRUNDLE

Hardware Pack

HP#: T5585096-02

4009059(Black)

4009219(Gold)

HP#: T5585196-02

1234

1/4" X 5/8"

8 PCS

1/4" X 1 5/16"

4 PCS

4mm

1 PC

1/4"

4 PCS

5

Wrench

1 PC

9

Step1

The following instructions will illustrate how

to assemble the Daybed from Step 1 to

Step 7.

Please use the Daybed Hardware

Pack on Page 7.

Orient parts T/A/B/C/D as illustrated.

Insert T x 2 into A/B and C/D with .

X 8

Correct: Part T penetrating

through Part A,B,C&D.

Incorrect: Part T NOT penetrating

through Part A,B,C&D.

BB

T

3

A

B

C

D

T

 BK

 1 / 3

BK

10

Step2

Attach J x 2 to A/B/C/D with .

X 8

1

Wide side of the slot should

be facing up and inside!

A

B

C

D

J

C

 BL

 1 / 7.5

BL

11

Step3

Attach I to B/C with .

X 4

2

B

C

I

C

I

12

Step4

JJ

Slip O into place by sliding to the

side and down.

J

O

OO

J

4.1 Insert O into J X 2 as illustrated.

4.2 Slip O into place by sliding to the

side and down.

4.1 4.2

13

Step5

J

O

J

Lock O with Y on the longer slot.

O

JJ

Y

14

Step6

WQ

O

6.1 6.2

O

6.1 Press W onto the middle of O as

illustrated.

6.2 Press Q onto W alternating left and

right.

W

 BM

 1 / 4

BM

15

Step7

Attach S x 4 to A/B/C/D.

A

B

C

D

S

D

BN

BP

16

Step8

The following instructions will illustrate how

to assemble the Trundle from Step 8 to

Step 13.

Please Use the Trundle Hardware Pack on

Page 8.

Attach N1 x 2 to one of E with and .

X 2

E

EE

N1

1

3

X 2

3

Wide side of the slot should

be facing up and inside!

The Lever "OFF" should

be oriented on the same

side of slat slots.

BR

BT

17

Step9

Attach N x 2 to the other E with  and .

X 2

3

1

X 2

1

3

E

N

E

N

E

N

Wide side of the slot should

be facing up and inside!

BU

18

Step10

Attach M x 2 to E x 2 with .

X 8

N1

E

M

N

M

E

2

19

Step11

EEE

11.1 Insert O into E X 2 as illustrated.

11.2 Slip O into place by sliding to the

side and down.

11.1 11.2

O

OOO

E

20

Step12

O

E

EE

O

Y

Lock O into place with Y on the longer slot.

La page charge ...

DHP Furniture 4009059 Manuel utilisateur

Ce manuel convient également à

DHP Furniture 4009059 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents