Samsung DMT610RHS/XAC-00 Manuel utilisateur

Marque: Samsung

Modèle: DMT610RHS/XAC-00

Catégorie: Lave-vaisselle

Taper: Manuel utilisateur

Dishwasher

user manual

imagine the possibilities

Thank you for purchasing this Samsung product.

To receive more complete service,

please register your product at

www.samsung.com/register

DMT610 Series

DMT610_DD68-00085A-02_EN_20120921.indd 1DMT610_DD68-00085A-02_EN_20120921.indd 1 2012-09-21  2:02:522012-09-21  2:02:52

2_ features of your new samsung dishwasher

features of your new samsung

dishwasher

Your new Samsung Dishwasher will change the way you feel about doing

dishes. From its extra large capacity to its energy efﬁ ciency, your new Samsung

dishwasher has all the features to make your chores much less mundane.

1. Extra large capacity

The upper rack is slanted for larger dishes. The space has been maximized to accommodate

a variety of dish sizes.

2. Elegant design with digital touch sensors

Your dishwasher features digital touch sensors in the control panel for simpler operation with

a touch of elegance.

3. Increased convenience

The smart auto cycle determines the level of soil on the dishes and initiates the optimal cycle

for cleaning. Use this feature to save water, energy, and time.

4. Extremely quiet operation

Efﬁ cient noise control technology gives you the quietest possible operation. Your new

Samsung dishwasher is quieter than ever.

5. Self-cleaning ﬁ lter

Cleaning the ﬁ lter yourself is a thing of the past! This product keeps food waste internally

while operating, then drains it automatically with the water.

6. Twin fan condensing drying

Two fans connected to one motor make for better drying performance. Still better, your

dishwasher emits no hot steam. Instead, it mixes external fresh air with the internal hot steam

during drying to eliminate the steam, making your dishwasher safer and easier to use.

This manual contains important information regarding the use and care of your new Samsung

dishwasher. Refer to it for descriptions of the control panel, instructions on how to use the

dishwasher, and tips for making the most of its state-of-the-art features and technologies. The

cycle chart on page 22 offers an overview of the different cycles and the troubleshooting section

on page 23 tells you what to do if something goes wrong.

DMT610_DD68-00085A-02_EN_20120921.indd Sec9:2DMT610_DD68-00085A-02_EN_20120921.indd Sec9:2 2012-09-21  2:03:332012-09-21  2:03:33

safety information _3

safety information

Throughout this manual, you’ll see Warning and Caution notes. These

important safety instructions do not cover all possible situations that might occur.

It is your responsibility to use caution when installing, maintaining, and operating

your dishwasher. Samsung is not liable for any damage resulting from improper

use.

IMPORTANT SAFETY INSTRUCTIONS

What the icons and signs in this user manual mean :

WARNING

Hazards or unsafe practices that may result in severe personal injury or

death.

CAUTION

Hazards or unsafe practices that may result in personal injury or property

damage.

CAUTION

To reduce the risk of ﬁ re, explosion, electric shock, or personal injury when

using your dishwasher, follow these basic safety precautions:

Do NOT attempt.

Do NOT disassemble.

Do NOT touch.

Follow directions explicity.

Unplug the power plug from the wall socket.

Make sure the machine is grounded to prevent electric shock.

Call the service center for help.

WARNING - When using the dishwasher, follow basic precautions, including the

following:

Read all instructions before using the dishwasher.

As with any equipment using electricity, water, and moving parts, potential hazards exist.

Use the dishwasher only for its intended function.

Use only detergents or wetting agents recommended for use in a dishwasher, and keep

them out of the reach of children.

When loading items to be washed:

- Place sharp items so that they are not likely to damage the door seal, and

- Load sharp knives with the handles up to reduce the risk of cut-type injuries.

Do not wash plastic items unless they are marked “dishwasher safe” or the equivalent.

For plastic items not so marked, check the manufacturer’s recommendations.

Do not touch the HEATING ELEMENT during or immediately after use.

SAVE THESE INSTRUCTIONS

DMT610_DD68-00085A-02_EN_20120921.indd Sec1:3DMT610_DD68-00085A-02_EN_20120921.indd Sec1:3 2012-09-21  2:03:332012-09-21  2:03:33

4_ safety information

Do not operate the dishwasher unless all ENCLOSURE panels are properly in place.

Do not tamper with the controls.

Do not abuse, sit on, or stand on the door, lid, or dish racks of the dishwasher.

To reduce the risk of injury, do not allow children to play in or on the dishwasher.

To reduce the risk of ﬁ re or explosion:

- Under certain conditions, hydrogen gas may be produced in a hot water system that

has not been used for two weeks or more. HYDROGEN GAS IS EXPLOSIVE. If the hot

water system has not been used for such a period, before using the dishwasher, turn

on all hot water faucets and let the water ﬂ ow from each for several minutes. This will

release any accumulated hydrogen gas. As the gas is ﬂ ammable, do not smoke or use

an open ﬂ ame during this time.

Remove the door to the washing compartment when removing an old dishwasher from

service or discarding it.

After unpacking the dishwasher, keep the packaging out of the reach of children.

The dishwasher is extremely heavy. Do not attempt to move or carry the dishwasher by

yourself. Two or more people are needed to move a dishwasher and avoid potential injuries.

Do not install the dishwasher near electrical components. Keep the dishwasher away from

open ﬂ ames.

Install and level your dishwasher on an uncarpeted ﬂ oor that can support its weight.

Your dishwasher must be properly grounded. Never connect it to an ungrounded outlet.

See page 11 for more information on grounding your dishwasher.

Connect the ground wire to the green ground connector in the terminal box.

After the dishwasher is installed, check that the drain hose is properly connected and

that there is no leakage from the hose connectors. If the drain hose is loose, it may cause

property damage.

The water supply line is susceptible to breakage. As time goes by, it becomes less ﬂ exible.

Check the line periodically. If it is swollen, torn, cut or there is a water leak, replace it

immediately.

To safely operate this appliance, familiarize yourself with its operations and exercise care

when using it.

Do not put gasoline, solvents, or other ﬂammable materials inside the dishwasher. Do not

wash dishes exposed to these materials.

Keep your dishwasher detergent out of the reach of children. Detergent has an adverse

effect on human organs. It contains elements for polishing and is corrosive. Avoid letting the

detergent come into contact with your skin and eyes.

Do not push or place pressure on the door when it is open, as this may damage the

dishwasher or cause harm.

Do not allow children to play in or on the dishwasher. They may harm themselves or

damage the dishwasher.

Disconnect the power cable (or disconnect the circuit breaker) before servicing your

dishwasher.

safety information

SAVE THESE INSTRUCTIONS

DMT610_DD68-00085A-02_EN_20120921.indd Sec1:4DMT610_DD68-00085A-02_EN_20120921.indd Sec1:4 2012-09-21  2:03:332012-09-21  2:03:33

safety information _5

Do not repair, replace, or service any part of your dishwasher yourself. Disassembly, repairs

and modiﬁ cations are permitted by authorized service technicians only. Work done by an

unauthorized person may void your warranty.

Before disposing of your dishwasher, remove the door of the washing compartment or the

door latch so that children or small animals can not get trapped inside.

If the dishwasher is left unused for an extended period of time, turn off the water supply.

This dishwasher is intended for residential use only.

BEFORE USING YOUR DISHWASHER

WARNING

Tip-Over Hazard

- Do not use the dishwasher until it is correctly installed.

- Do not push down on an open door.

- Do not place excessive weight on the open door.

Electric Shock Hazard

Failure to follow these instructions can result in death, ﬁ re, or electric shock:

- Electrically ground the dishwasher

- Connect the ground wire to the green ground connector in the junction box.

- Do not use an extension cord.

State of California Proposition 65 Warnings:

The California Safe Drinking Water and Toxic Enforcement Act requires the Governor of

California to publish a list of substances known to the State of California to cause cancer,

birth defects, or other reproductive harm, and requires businesses to warn of potential

exposure to such substances.

This product contains a chemical known to the State of California to cause cancer, birth

defects, or other reproductive harm. This appliance can cause low-level exposure to some

of the substances listed, including benzene, formaldehyde, and carbon monoxide.

SAVE THESE INSTRUCTIONS

WARNING

DMT610_DD68-00085A-02_EN_20120921.indd Sec1:5DMT610_DD68-00085A-02_EN_20120921.indd Sec1:5 2012-09-21  2:03:332012-09-21  2:03:33

6_ Contents

contents

SETTING UP YOUR DISHWASHER

7 Unpacking your dishwasher

7 Checking parts

8 Meeting installation requirements

9 Control panel

11 Cycle selector

11 Progress lights

USING YOUR DISHWASHER

12 Basic guidelines

14 Adjusting the angle of the plate supports

15 Adjusting the height of the upper rack

15 Removing the upper rack

16 Loading the lower rack

16 Loading the upper rack

17 Using the cutlery basket

18 Using the dispenser

CLEANING AND MAINTAINING YOUR

DISHWASHER

20 Cleaning the exterior

20 Cleaning the interior

20 Cleaning the nozzles

21 Storing your dishwasher

CYCLES

22 Cycle chart

TROUBLESHOOTING

23 Check these points if your dishwasher…

26 Information codes

APPENDIX

27 DISPOSING THE DISHWASHER AND

Helping the environment

27 Speciﬁ cations

DMT610_DD68-00085A-02_EN_20120921.indd Sec2:6DMT610_DD68-00085A-02_EN_20120921.indd Sec2:6 2012-09-21  2:03:332012-09-21  2:03:33

setting up your dishwasher _7

setting up your dishwasher

Be sure to have your installer follow these instructions closely so that your new

dishwasher works properly and that you’re not at risk of injury when washing

dishes.

UNPACKING YOUR DISHWASHER

• Once your new dishwasher has been delivered to you, carefully unpack it and check for any damage.

If the dishwasher has been damaged, make note of it on the waybill and keep a copy. Do not install the

dishwasher, and contact Samsung Customer Service at the number listed below.

• If there is no damage to the product, you can proceed with the installation. If you are going to install it

yourself, make sure to read through the installation guide and follow the directions inside.

• After unpacking your dishwasher, keep the packaging out of the reach of children to ensure their safety.

CHECKING PARTS

When your dishwasher has been unpacked, make sure you’ve received all the parts shown below.

If your dishwasher was damaged during shipping, or if you do not have all the parts, contact Samsung

Customer Service at 1-800-SAMSUNG (726-7864)

Cutlery basket

Accessory parts - User/Installation manual, Installation Kit.

Middle

nozzle

Upper rack Lower rack

01 setting up your dishwasher

Air brake

Base

Dispenser

Door

Lower nozzle

Vapor vent cover

Control panel

DMT610_DD68-00085A-02_EN_20120921.indd Sec3:7DMT610_DD68-00085A-02_EN_20120921.indd Sec3:7 2012-09-21  2:03:332012-09-21  2:03:33

8_ setting up your dishwasher

setting up your dishwasher

MEETING INSTALLATION REQUIREMENTS

Electrical supply and grounding

To prevent unnecessary risk of ﬁre, electric shock, or personal injury, all wiring and grounding

must be done in accordance with the National Electrical Code ANSI/FNPA, No. 70 Latest

Revision and local codes and ordinances. It is the personal responsibility of the appliance owner

to provide adequate electrical service for this appliance.

Never use an extension cord.

When preparing for installation, ensure that your power supply offers:

• A 120 Volt 60 Hz 15 AMP fuse or circuit breaker

• An individual branch circuit serving only your dishwasher

Your dishwasher must be grounded. If your dishwasher malfunctions or breaks down, grounding

will reduce the risk of electric shock by providing a path of least resistance for the electric

current.

Never connect the ground wire to plastic plumbing lines, gas lines, or hot water pipes.

GROUNDING INSTRUCTIONS

For a permanently connected appliance:

This appliance must be connected to a grounded, metal, permanent wiring system, or an

equipment-grounding conductor must be run with the circuit conductors and then connected to

the equipment-grounding terminal or lead on the appliance.

Water supply

The hot water supply line pressure must be between 20~120 psi (140~830 kPa).

Adjust the water heater to deliver water between 120˚F (49˚C) ~ 149˚F (65˚C).

Most plumbing supply stores sell water supply lines of various lengths up to 10 feet

(305 cm) long.

You can reduce the risk of leaks and water damage by:

• Making water faucets easily accessible.

• Turning off faucets when the dishwasher is not in use.

• Periodically checking for leaks at water supply line ﬁttings.

Before using your dishwasher for the ﬁrst time, check all connections at the water supply valve

and faucets for leaks.

Flooring

For safety, your dishwasher must be installed on a solidly constructed ﬂ oor.

Never install your dishwasher on a platform or poorly supported structure.

Your dishwasher must be properly installed in accordance with the Installation Guide before you use it. If

you did not receive an Installation Guide with your dishwasher, you can obtain one by visiting our website at

www.samsung.com.

CAUTION

WARNING

DMT610_DD68-00085A-02_EN_20120921.indd Sec3:8DMT610_DD68-00085A-02_EN_20120921.indd Sec3:8 2012-09-21  2:03:382012-09-21  2:03:38

setting up your dishwasher _9

CONTROL PANEL

DMT610 Series

DISPLAY

Displays wash information (Delay start hours, Low rinse, Child Lock/Unlock,

Sanitize).

When Low Rinse remains illuminated, there is no rinse agent in the

dispenser. Reﬁ ll the rinse aid dispenser.

CHILD LOCK/

UNLOCK

This option allows you to lock the buttons on the control panel so children

cannot accidently start the dishwasher by pressing the buttons on the

panel.

To activate and deactivate Child lock/unlock, hold the Child lock/

unlock button down for 3 seconds.

- When Power is On : Hold down the Child lock/unlock button for three

(3) seconds.

- When Power is Off : Push the Power button ﬁ rst, and then hold down

the Child lock/unlock button for three (3) seconds.

SANITIZE

The temperature rises to 162˚F (72˚C) in the ﬁ nal rinse cycle for high

temperature sanitization.

If you select the Sanitize option, the “Sanitize” lamp blinks when the water

temperature reaches the sanitary temperature (over 155˚F (68˚C)), and then

remains illuminated until the Sanitze option ends. When you open the door

or press the Power button, the “Sanitize” lamp turns off.

You cannot select the Delicate cycle if you select the Sanitize option.

The Sanitize feature is in accordance with NSF/ANSI standard 184

for Residential Dishwashers. Certiﬁ ed residential dishwashers are not

intended for licensed food establishments. Your dishwasher is NSF

Certiﬁ ed.

The cycle that is NSF certiﬁ ed is the Heavy Cycle with the sanitize option

selected.

DELAY START

Delay a cycle for up to 9 hours in three-hour increments. The hour displayed

indicates the time at which the wash will start.

01 setting up your dishwasher

1 42 3

DMT610_DD68-00085A-02_EN_20120921.indd Sec3:9DMT610_DD68-00085A-02_EN_20120921.indd Sec3:9 2012-09-21  2:03:382012-09-21  2:03:38

10_ setting up your dishwasher

CYCLE

SELECTOR

Select the appropriate wash cycle depending on the soil level of your

dishes. After you select a cycle, the Cycle On light for that cycle lights up.

If you want to cancel the selected cycle, press the selected cycle button

again.

CANCEL &

DRAIN

To cancel a cycle currently running and drain the dishwasher, hold down

both the Heavy and Delicate buttons for three (3) seconds.

POWER

When you press the Power button, the entire display turns on and off, and

then the light of the most recently ﬁ nished cycle lights up.

When the cycle you selected has ﬁ nished, all other indicator lights are

turned off and the “Clean” light is illuminated for 10 minutes (See p. 11).

Then, the Power turns off automatically.

You can select options (Delay start, Sanitize) before starting a cycle. If you change the cycle after

selecting an option, the original cycle is reset.

setting up your dishwasher

6 75

DMT610_DD68-00085A-02_EN_20120921.indd Sec3:10DMT610_DD68-00085A-02_EN_20120921.indd Sec3:10 2012-09-21  2:03:382012-09-21  2:03:38

setting up your dishwasher _11

CYCLE SELECTOR

DMT610 Series

NORMAL Use this cycle for regular dinner dishes.

HEAVY Use this cycle for heavily soiled dishes and dishes with heavy oil.

DELICATE Use this cycle for normally soiled dishes or fragile items such as glasses.

POT & PANS

Use this cycle for hard-to-clean, heavily soiled dishes, pot & pans, and dishes

with heavy oil.

QUICK +

Use this cycle for lightly soiled dishes.

SMART AUTO

This cycle detects the level of soil and automatically initiates the optimal cycle

after a few minutes of operation.

PROGRESS LIGHTS

DMT610 Series

WASH

When the dishwasher is in a wash portion of a cycle, the Wash light is

illuminated.

DRY

When the dishwasher is in a drying portion of a cycle, the Dry light is

illuminated.

CLEAN

After the dishwasher has completed all portions of a cycle, all other indicator

lights are turned off and the Clean light is illuminated for 10 minutes.

If you open the door when the Clean light is illuminated, it turns off

immediately.

DISPLAY

Displays the remaining wash time, any wash information (Delay Start, Time

Left), and error messages.

If an error occurs during an operation, an error message is displayed with a

warning sound. Refer to the information codes page.

When the dishwasher starts a cycle, the light corresponding to the current operation turns on to show

the progress of the cycle. When that portion of the cycle is complete, the light turns off.

01 setting up your dishwasher

1 2

4 5 6

1 2 3

DMT610_DD68-00085A-02_EN_20120921.indd Sec3:11DMT610_DD68-00085A-02_EN_20120921.indd Sec3:11 2012-09-21  2:03:392012-09-21  2:03:39

12_ using your dishwasher

using your dishwasher

BASIC GUIDELINES

1. Open the door and load your dishes (see page 16).

- Place dishes into the upper and lower racks, unless you have selected half load.

- Remove any food remains from the dishes before placing them in the rack(s).

- After placing the dishes into the racks, rotate the nozzles by hand to check whether any of the

dishes will interfere with them.

- Make sure the dishes do not block the detergent dispenser opening.

2. Add detergent to the dispenser (see page 18).

- Make sure to use only automatic dishwasher detergent.

- Refer to “Using the dispenser” on how to add detergent.

3. Press the Power button.

- When you press the Power button, the entire display turns on and off, and then the cycle light of the

most recently ﬁ nished cycle lights up.

- If “Low Rinse” is illuminated, you should reﬁ ll the rinse aid dispenser to improve washing and

drying performance.

4. Select an appropriate cleaning cycle depending on the soil level of the dishes. (see pages 10 and 22).

- Press the appropriate cycle button.

- When you press a cycle button, the cycle indicator light is illuminated. If you press the cycle button

again, the light turns off and the cycle is canceled.

- For information about selecting a cycle according to the soil level of the dishes, see “Cycle Selector”.

5. Close the door.

- Push the racks back so that they are in place. Close the door.

- When the door is closed, the dishwasher will start draining after a few seconds, and then start the

cycle you selected.

- Make sure to close the door ﬁ rmly. If the door is slightly ajar, the selected cycle will not Start

automatically.

6. When the wash cycle is completed.

- The Clean light illuminates and the dishwasher sounds a chime.

- The power is automatically turned off after 10 minutes.

If you want to load more dishes or pause the dishwasher while it is already running, make sure to open

the door slowly and carefully as there is a possibility of injury from the hot steam inside the dishwasher.

(If you open the door while the dishwasher is running, a safety mechanism is activated and stops the

cycle.)

You should use rinse aids for better drying performance. You can further improve drying performance

by also selecting the Sanitize option.

If the “Low rinse” lamp lights during a cycle, the dishwasher adds 30 more minutes to the Drying cycle

automatically after the Clean light illuminates.

When the water temperature of the last rinse of the sanitize option reaches the sanitary temperature

(over 155˚F (68˚C)), the Sanitize lamp blinks, and then remains illuminated until the Sanitze option ends.

When you open the door or press the Power button, the “Sanitize” lamp turns off.

CAUTION

DMT610_DD68-00085A-02_EN_20120921.indd Sec4:12DMT610_DD68-00085A-02_EN_20120921.indd Sec4:12 2012-09-21  2:03:392012-09-21  2:03:39

using your dishwasher _13

Touch controls

Touch controls allow you to operate the dishwasher easily.

• They are convenient to operate, with a soft touch.

• Have a simple and stylish design.

• Are easy to clean.

If you have children or you want to clean the Control Interface, we recommend activating

the Child lock/unlock feature to lock the control buttons.

- Children will not be able to accidently start the dishwasher by touching the controls with

this option selected.

- If a cycle is running, buttons will not respond.

- If dishwasher is off, only the Power button responds.

Delay start

When you select Delay start option, your dishwasher will start.

• Draining to remove remaining water at once(pre-drain)

• Dishwasher will ﬁ ll automatic, and Spray arms will rotate for 30 seconds once

• Spray arms will rotate for 60 seconds every 8 hours until the delay time ﬁ nished,to prevent for

hardening the food soil.

Your dishwasher will operate the selected cycle when ﬁ nishing the delay time.

When using the dishwasher, try to arrange the dishes properly as described on page 16.

• You should remove food remains such as bones, fruit seeds, etc. and any other waste such

as toothpicks, paper, etc. from the dishes as these may cause damage to the dishes, create

noise, or cause the dishwasher to malfunction.

• Select the appropriate cycle depending on the level of soil and the type of dishes.

• Use only the proper amount of detergent and rinsing agent.

Do not wash the following items

• Acrylic, Aluminum: Also, dishes with printed gold rim decoration may become discolored.

• Dishes treated with adhesive: Treated plastics, wood, ivory, copper and tin may come

loose.

• Plastics with a temperature tolerance less than 194˚F (90˚C) : Thin plastics wash and dry

poorly, and may be damaged due to elevated wash temperatures.

• Tin: Tin should be washed by hand and dried immediately as it may rust.

• Wooden utensils: Wooden items may crack.

02 using your dishwasher

WARNING

DMT610_DD68-00085A-02_EN_20120921.indd Sec4:13DMT610_DD68-00085A-02_EN_20120921.indd Sec4:13 2012-09-21  2:03:392012-09-21  2:03:39

14_ using your dishwasher

ADJUSTING THE ANGLE OF THE PLATE SUPPORTS

You can adjust the angle of the tines in the upper rack to three different positions to match the size and

shape of your dishes. To adjust the tines, grasp the handle at the back of the rack and push it left or right.

See the illustration below.

In the lower rack, you can easily remove the plate support to make room for large items such as pots

and pans. To remove the plate support, lift up the handles (A). To reﬁ t the plate support, align it so it is in

place, and then push down on the handles (A). To fold down the fold-down tines on the lower rack, remove

the rack from the dishwasher, turn the rack over, grasp the tine (B), and then push it backward. See the

illustration below.

using your dishwasher

Upper rack

Lower rack

DMT610_DD68-00085A-02_EN_20120921.indd Sec4:14DMT610_DD68-00085A-02_EN_20120921.indd Sec4:14 2012-09-21  2:03:392012-09-21  2:03:39

using your dishwasher _15

ADJUSTING THE HEIGHT OF THE UPPER RACK

You can adjust the height of the upper rack in your Samsung dishwasher so that the lower rack can

accommodate larger sized dishes. Depending on where you set the upper rack height, the lower rack can

accommodate plates up to 14 in. (36cm) in diameter and the upper rack can accommodated plates up to

12 in. (30 cm) in diameter.

DMT610 Series

1. To lower the upper rack by 2 in. (5 cm), press

the ‘A’ levers located at the left and right

sides of the upper rack and push the upper

rack downwards slightly at the same time.

2. To raise the upper rack, just pull the upper

rack upwards without operating any levers.

The levers will latch and the upper rack will

move to the high position.

We recommend adjusting the height of the

upper rack before loading dishes into the

rack. If you adjust the rack after loading the

dishes, you may damage the dishes.

REMOVING THE UPPER RACK

Pull the upper rack towards the front and then remove it by lifting it up slightly and pulling it towards the

front. See the illustrations below.

While the upper rack is removable, you must have it or the spread nozzle (see below) installed for the

dishwasher to operate properly. If you attempt to operate the dishwasher without the rack or nozzle,

the dishwasher will become noisy and perform poorly.

Step 1. Step 2. Step 3.

Using the spread nozzle instead of the upper rack

You can use the extra spread nozzle instead of the upper

rack when you wash tall items such as oven trays in the

lower rack. Remove the upper rack, insert the extra spread

nozzle into the middle of duct nozzle, and then load tall

items into the lower rack.

Insert the spread nozzle into the middle outlet of

the duct nozzle, and then turn the spread nozzle

clockwise to lock. Refer to the illustration on the right.

02 using your dishwasher

CAUTION

DMT610_DD68-00085A-02_EN_20120921.indd Sec4:15DMT610_DD68-00085A-02_EN_20120921.indd Sec4:15 2012-09-21  2:04:072012-09-21  2:04:07

16_ using your dishwasher

LOADING THE LOWER RACK

Load cookware (pots, pans, etc.), up to 14 in. (36 cm) in diameter into the lower rack. The lower rack has

been especially designed for dinner dishes, soup bowls, plates, pots, lids, casserole dishes, and plates.

Load your plates into the center column of the rack their open sides faced each other. Load large items

such as pans and pots into the dishwasher so their open sides face downwards. We recommend loading

cups, stemware and small plates into the upper rack.

See the recommended loading patterns below.

12 place setting 10 place setting

LOADING THE UPPER RACK

The upper rack has been designed for small plates, mugs, glasses, and plastic items marked “dishwasher

safe”. Load your plates into the dishwasher so their open sides faced each other.

Make sure the loaded dishes do not interfere with the rotation of the nozzle which is located at the bottom

of the upper rack. (Check this by rotating the nozzle by hand.)

When loading dishes, pull the upper rack out sufﬁ ciently so you can load it without striking the counter

above.

12 place setting 10 place setting

Using the glass support

You can load cups or glasses onto the glass support. This is also

very convenient for washing wine glasses. Hang your wine glasses

onto the prongs of the glass support.

You can fold the glass support back when it is not being used.

using your dishwasher

DMT610_DD68-00085A-02_EN_20120921.indd Sec4:16DMT610_DD68-00085A-02_EN_20120921.indd Sec4:16 2012-09-21  2:04:112012-09-21  2:04:11

using your dishwasher _17

Loading large items

You can load large items such as pans and pots into the lower rack.

Make sure pot handles and other items do not interfere with the

rotation of the nozzles.

USING THE CUTLERY BASKET

The cutlery basket consists of two compartments with covers.

You can place each knife, spoon, or fork separately into the spoon

stands in the basket’s covers to prevent chipping and discoloration.

See the diagram below.

DO NOT let any item extend through the bottom.

Cutllery Items

Small forks

Spoons

Knives

Large spoons and forks

Medium-sized forks

Remaining items

The spoon stands as seen from above with the suggested placement of cutlery items. Match the numbers

in the diagram to the numbers in the list of cutlery items above.

You can use the cutlery basket with the cover open.

Refer to the illustration to the right.

Suggested arrangement for a 12 place setting

02 using your dishwasher

1 532 4

DMT610_DD68-00085A-02_EN_20120921.indd Sec4:17DMT610_DD68-00085A-02_EN_20120921.indd Sec4:17 2012-09-21  2:04:152012-09-21  2:04:15

18_ using your dishwasher

USING THE DISPENSER

Filling the detergent dispenser

1. Open the cover by pushing the cover latch downwards.

2. Add the amount of detergent recommended in the table

below to the main wash dispenser.

3. Close the dispenser cover. You will hear a ‘click’ when it is

closed correctly.

4. When you select the Heavy cycle, add the amount of

detergent recommended in the table in the table below to

the pre-wash dispenser.

The cover opens automatically to dispense the detergent during the wash.

CYCLE

AMOUNT OF DETERGENT

Main wash dispenser Pre-wash dispenser

Normal, Delicate,

Quick +, Smart Auto

0.5 oz (15 g) No detergent

Heavy, Pot & Pans 0.7 oz (20 g) 0.2 oz (5 g)

The numbers inside the dispenser refer to grams.

using your dishwasher

‘Click’

Cover latch

DMT610_DD68-00085A-02_EN_20120921.indd Sec4:18DMT610_DD68-00085A-02_EN_20120921.indd Sec4:18 2012-09-21  2:04:162012-09-21  2:04:16

using your dishwasher _19

Filling the rinse aid dispenser

Your dishwasher has been designed to use liquid rinse aid.

The use of a rinse aid greatly improves the drying performance after the ﬁ nal rinse.

1. Turn the dispenser knob counterclockwise to open the

cover.

2. Pour rinse aid into the opening until the indicator points to

“MAX.” Avoid overﬁ lling the dispenser.

3. Adjust the amount of rinse aid released during the rinse

operation.

You can choose one of four levels (1~4). The higher the

number, the larger the amount of rinse aid released. The

factory default is 3.

When the rinse dispenser is ﬁ lled up, it is good for about 40

washes.

4. Close the cover.

Turn the dispenser knob clockwise.

We strongly recommended using only liquid rinse aid.

02 using your dishwasher

Avoid overﬁ lling the

dispenser

CAUTION

DMT610_DD68-00085A-02_EN_20120921.indd Sec4:19DMT610_DD68-00085A-02_EN_20120921.indd Sec4:19 2012-09-21  2:04:162012-09-21  2:04:16

20_ cleaning and maintaining

cleaning and maintaining your

dishwasher

Keeping your dishwasher clean improves its performance, reduces unnecessary

repairs, and lengthens its life.

CLEANING THE EXTERIOR

It’s best to clean spills on the outside of your dishwasher as they occur. Use a soft, damp cloth on the

control panel to gently wipe away spills and dust. Do not use benzene, wax, thinner, chlorine bleach, or

alcohol. These materials may discolor the dishwasher and cause stains. Do not clean the dishwasher by

sprinkling water over it and avoid letting water come into contact with any of the electrical parts.

If your dishwasher has a stainless steel door panel, you can clean it with a stainless steel cleaner for

Home Appliances or similar product using a clean, soft cloth.

CLEANING THE INTERIOR

Clean the interior of your dishwasher periodically to remove any dirt or food particles. Wipe the inside of

the dishwasher and the inner part of the door with a wet dishcloth. We recommend ﬁ lling the detergent

dispenser with dish detergent, and then running the dishwasher empty periodically using either the Normal

or Quick cycle with the sanitize option. This will keep your dishwasher clean.

If white spots and odor are present in your dishwasher, run the Normal cycle with the dishwasher empty

and without detergent until it ﬂ ushes. Then, interrupt the cycle and put an 8 ounce cup of white vinegar into

the lower basket. Close the dishwasher and let the cycle ﬁ nish.

Do not remove the Seal tub front (the long rubber seal enclosing the opening of the dishwasher).

CLEANING THE NOZZLES

If your dishwasher does not seem to be cleaning adequately or the nozzles seem clogged, you can clean

each of the nozzles. When removing the nozzles, take care as they may break.

Lower nozzle

1. Check whether the nozzle holes are

clogged by food particles.

2. If cleaning is needed, remove the nozzle by

pulling it upwards.

3. Clean the nozzle holes, and then push the

nozzle back into place.

4. Check whether the nozzle is engaged

correctly by rotating it by hand.

CAUTION

DMT610_DD68-00085A-02_EN_20120921.indd Sec5:20DMT610_DD68-00085A-02_EN_20120921.indd Sec5:20 2012-09-21  2:04:162012-09-21  2:04:16

La page charge ...

Samsung DMT610RHS/XAC-00 Manuel utilisateur

Marque: Samsung

Modèle: DMT610RHS/XAC-00

Catégorie: Lave-vaisselle

Taper: Manuel utilisateur

Télécharger le PDF

rapport

dans d''autres langues

English: Samsung DMT610RHS/XAC-00 User manual

Samsung DMT610RHS/XAC-00 Manuel utilisateur

Samsung DMT610RHS/XAC-00 Manuel utilisateur

dans d''autres langues

Documents connexes