Magma C10-601A-CSA Manuel utilisateur

Marque: Magma

Modèle: C10-601A-CSA

Catégorie: Barbecues

Taper: Manuel utilisateur

Ce manuel convient également à

ADVENTURER RV CAMPING SERIES

™

C10-601A • C10-603A • C10-601A-CSA • C10-603A-CSA

OWNER’S MANUAL

800

MAGMA

7:00 a.m. - 5:00 p.m.

Pacific Time Monday thru Friday

or e-mail us at

[email protected]

For questions regarding performance,

assembly, operation, parts, or returns,

contact the experts at MAGMA directly

by calling TOLL FREE

IMPORTANT, read these instructions carefully before use. Familiarize yourself with the appliance

before connecting it to its gas container. Keep these instructions for future reference.

For questions regarding performance, assembly,

operation, parts, or returns, contact the experts

at MAGMA by calling (562) 627-0500

7:00 a.m. -

4:00 p.m. Pacific Time Monday thru

Friday or e-mail us at mail@MagmaPr

oducts.com

• USE OUTDOORS ONLY. NEVER USE UNDER AWNINGS, PATIO COVERS, ETC.

• NOT FOR USE ON BOATS OR MARINE APPLICATIONS

• DO NOT USE THIS APPLIANCE INSIDE ANY ENCLOSED SPACE.

• GRILLS RADIATE HEAT. CLEARANCE FROM COMBUSTIBLES, 24” SIDES AND BACK.

• USE PROPANE GAS ONLY. FUEL STORAGE SHOULD BE IN COMPLIANCE WITH THE NATIONAL FIRE PROTECTION

ASSOCIATION (NFPA) STANDARD 58 LIQUID PETROLEUM GAS CODE AND OCCUPATIONAL HEALTH AND SAFETY

ADMINISTRATION (OSHA) STANDARD 29 CFR 1910.101

• FOR NATURAL GAS APPLICATION CONTACT MAGMA.

• ALWAYS LIGHT GRILL WITH LID OPEN.

• NEVER LEAVE HOT GRILL UNATTENDED.

• DO NOT OVERHEAT GRILL, SEE OPERATING INSTRUCTIONS

• ALWAYS TURN GRILL OFF AFTER USE.

• USE GLOVE OR HOT PAD WHEN HANDLING HOT GRILL.

• NEVER LEAVE GAS CYLINDERS AND REGULATOR CONNECTED WHEN STORED.

• STORE GAS CYLINDERS IN A SECURE WELL VENTILATED AREA, OFF OF THE GROUND,

ON A NON-COMBUSTIBLE BASE.

• DO NOT STORE GAS CYLINDERS INDOORS, IN DIRECT SUNLIGHT, OR IN LOCKERS NOT

APPROVED FOR BUTANE OR PROPANE STORAGE.

• CAUTION: CHECK FOR GAS LEAKS EACH TIME CYLINDER IS CHANGED.

• NEVER CHECK FOR GAS LEAKS WITH A FLAME!

• DO NOT BLOCK, RESTRICT, OR OTHERWISE OBSTRUCT COMBUSTION OR VENTILATION AIR OPENINGS.

• DO NOT MODIFY THIS APPLIANCE.

• KEEP AREA CLEAR OF COMBUSTIBLE MATERIALS, GASOLINE, AND OTHER FLAMMABLE VAPOURS AND LIQUIDS.

• ENSURE VALVE SEALING WASHER (A) IS IN PLACE AND IN GOOD CONDITION BEFORE CONNECTING FUEL.

• INSTALL CANISTERS IN WELL VENTILATED AREA AND AWAY FROM OPEN FLAME, HEAT SOURCE OR SPARKS. KEEP

AWAY FROM OTHER PEOPLE OR FLAMMABLE MATERIALS.

Each Magma

Gas Grill is individually fire tested before it leaves the factory.

For this reason, the burner on your grill may be slightly discolored.

POUR VOTRE SÉCURITÉ

Que faire si vous sentez une odeur de gaz:

1. Ne pas tenter d’allumer d’appareils.

2. Éteindre toute ﬂamme.

3. Couper l’alimentation en gaz à la source.

FOR YOUR SAFETY

If you smell gas:

1. Do not attempt to light appliance.

2. Extinguish any open ﬂame.

3. Disconnect from fuel Supply.

POUR VOTRE SÉCURITÉ

Ne pas entreposer ni utiliser d’essence ni d’autres

vapeurs ou liquides inﬂammables à appareil.

FOR YOUR SAFETY

Do not store or use gasoline or other liquids with

ﬂammable vapours in the vicinity of this or any other

appliance.

DANGER

MONOXYDE DE CARBONE

Cet appareil peut produire du

monoxyde de carbone, un gaz

inodore.

L’utilisation de cet appareil dans des

espaces clos peut entraîner la mort.

Ne jamais utiliser cet appareil

dans un espace clos comme un

véhicule de camping, une tente, une

automobile ou une maison.

DANGER

CARBON MONOXIDE HAZARD

This appliance can produce carbon

monoxide which has no odor.

Using it in an enclosed space can kill

you.

Never use this appliance in an

enclosed space such as a camper,

tent, car or home.

IMPORTANT SAFETY WARNINGS

READ ALL INSTRUCTIONS BEFORE OPERATING.

Turbo Burner

Radiant Plate

Grill Grates

Lid Lock

“Stay Cool”

Handle

Oversized,

Balanced Lid

Outer Shell

Mount Support Pad

Valve Chamber

Slide Out

Grease Tray

Control Valve

Regulator Type 1

Folding Legs

Single mount

through-bolt application

4 Carriage bolts, washers & lock nuts.

Note: Place washers on bolts as shown above.

CONTROL VALVE REGULATOR

•Uses standard 1 lb. disposable propane canisters (DOT-39 NRC).

•Prior to installing valve, become familiar with the valve function & graphics

on valve knob. Never force the knob. Always turn or push gently.

•Turn control valve to “lock” and install gas canister being careful not to cross

the threads. Check for leaks prior to use, by brushing soapy water solution

around threads and orifice hole checking for bubbles.

•Position valve with gas bottle as shown (A). Gently insert valve stem

into valve chamber. Rotate until valve stem key aligns with lock detent

allowing valve to fully insert. Rotate gas canister down, so knob faces

you (B) or straight up (C) depending on application. Pull straight out

on valve to check that it is locked in place.

Valve will feel loose and will rotate easily. Even though the valve feels loose, it is designed

that way and will not leak. The valve was designed to be loose fitting in order to allow

safe, easy installation and removal of the propane canister and so it easily swings without

resistance to fit all applications

See Magma website

for replacement part numbers and valve

applications. MagmaProducts.com

MOUNT HARDWARE

Fasteners are supplied for Single Mount

option. See Magma Website for details.

Carriage bolt,

washer & lock nut

INSTALLATION INSTRUCTIONS

OPERATE ONLY ON “LOW” WHEN LID IS CLOSED.

ALWAYS OPERATE WITH GREASE TRAY IN PLACE.

WARNING: Do not overheat grill.

Magma Grills do not require pre-heating. Stainless

Steel loses anti-corrosive characteristics when subjected to extreme heat. Most

grilling is done on low temperature with the lid closed. If medium or high heat is

required, grill with lid open.

LIGHTING INSTRUCTIONS

• Open lid.

• Place flame up to burner through the match light hole.

• Depress valve and turn counter-clockwise to the “HIGH”.

• Visually confirm ignition.

TO REDUCE FLARE-UP

• Empty and clean grease tray prior to each use.

• Trim excess fats from meat.

• Use non-oil based marinades.

• Reduce heat.

• Use water spray directly on flare-ups.

NOTE: Before lighting, lid lock must be positioned not to engage. Open lid and

turn lock to locked position.

PRACTICAL HINTS:

Before lighting your grill, be sure that…

•

Grill is secure.

•

Internal components and grease tray are clean and correctly positioned.

•

You have plenty of gas in the canister.

•

Gas canister is attached properly and there are no gas leaks.

•

Lid lock has been set not to engage.

•

You have a water spray bottle handy to cool a hot grill or stop any flare-ups.

STORING TIPS

• Always disconnect the fuel canister from the valve prior to storing.

• Store the valve in a clean, dry area to protect from corrosion to valve.

•

Always store propane in a sealed propane storage locker that allows leakage to

vent or use Magma A10-210 Propane/Butane Canister Storage

Locker/Tote Bag.

OPERATING PROCEDURES

• Inspect burner, remove any obstructions.

• Clean as indicated in Maintenance (page 6).

• To re-assemble, reverse the procedure above.

1. To remove radiant plate pull locking

pin to release and lift plate up from

left side

2. Slide plate assembly from right to left.

3. To remove burner pull locking pin.

4. Lift burner.

5. Slide from right to left to remove from

grill body.

Check burner for grease residue or spider

webs that may obstruct gas flow.

CAUTION: WHEN REPLACING BURNER,

CUT SLOTS IN BURNER MUST FACE DOWN.

Locking grease tray accessible from either side

2. Slip Grease Tray lip between both

mount brackets

1. Slide Grease Tray into either side of

the mounting bracket to lock.

RADIANT PLATE

1. Release locking

pin & lift up

2. Slide out

TURBO BURNER

3. Release locking pin

TURBO BURNER

4. Lift up

5. Slide out

1. Slide in

to lock

2. Slip Grease Tray lip

between brackets

DISASSEMBLY & RE-ASSEMBLY

Stainless steel contrary to popular belief can rust. Most commonly, deposits on surface of the product will trap moisture.

It is this moisture that robs stainless steel of oxygen. Oxygen is the element that reacts with stainless steel to form a

protective layer of chrome oxide. Robbed of oxygen, this reaction does not take place and “crevice corrosion” or “surface

rusting” occurs. To minimize this effect, thoroughly clean your grill with soap and water, rinse with fresh water, and dry.

Avoid using stainless steel polishes on grill exterior as most leave a residue that may discolor when grill is heated.

Additionally, stainless steel that is exposed to high heat will change color and texture over time. The “amber” color of

grill exterior and internal components is not a failure of the stainless steel and will not affect products operation. When this

happens, we recommend using “Magma Magic” Grill Restorer to remove the “amber” color and return grill to its original

luster. However, prolonged exposure to extreme high heat will cause chromium and nickel to “burn out” of stainless steel. At

this point stainless steel will become more susceptible to corrosion and will start to deteriorate. We recommend replacement

of internal components as they become seriously deteriorated.

We recommend thoroughly cleaning grill and internal components after each outing. Disassemble interior components

and remove all food residue. Use a “Scotch-Brite” pad or similar product and “Easy-Off” oven cleaner for cleaning grills

interior components, followed by thoroughly washing with soap and water, rinse with fresh water & dry. Thoroughly rinse

the area between the interior heat shield and the front surface of the grill. AVOID CONTACT OF OVEN CLEANER WITH SKIN

AND CONTROL VALVE. CAUTION: DO NOT USE ANY TYPE OF ABRASIVE PAD ON EXTERIOR MIRROR FINISH AS IT WILL

SCRATCH SURFACE, USE ONLY A SOFT CLOTH. We recommend covering grill between uses. Grill covers are available at

Magma retailers or directly from Magma. See our website, MagmaProducts.com.

Grill Grates - Clean with brass wire brush while grill is warm. Use Oven & Grill cleaner for burnt-on residue. Wash with

soapy water and dry prior to storage.

Control Valve - All valves are set and tested at our factory. Do not attempt to adjust or disassemble the valve in any way.

Call Magma if you suspect it is not adjusted properly. Clean valve with a cloth and remove any debris obstructing the orifice.

Repair/Replacement Parts - All replacement parts are readily available at your Magma Retailers or directly from Magma.

For a complete list of replacement parts visit our website MagmaProducts.com.

USING GRILL WITH LARGER PROPANE TANKS

Propane (LPG)

Gas

Regulator

A10-225

Hose Kit

To other LPG

appliance

or use cap

Shut off

valve

Cylinder Valve

Gauge

Type 3

Valve

Solenoid

Valve

Chamber

Typical Pre-Regulated

LPG Application

Align valve stem key

to valve chamber

lock detent and rotate

Valve

Chamber

Valve

Chamber

Valve

Chamber

Type 3

Valve

• Magma LPG (Propane) Valves & Hose Kit allow

Magma Grills to be installed within an existing,

pre-regulated low pressure LPG (Propane)

System.

• Use only Magma Type 3 Low Pressure LPG

(Propane) Valves. See our Valve

Application Guide at MagmaProducts.com

for correct valve.

• In North America, use Magma A10-228 LPG

Hose Kit in conjunction with Type 3 Valve.

Outside North America, check with your local

dealer for proper hose and fittings.

• A primary shutoff valve must be used with this

control valve at point of connection. This allows

shut off of gas supply to hose leading to grill.

Install valve as shown in diagram above.

Even though valve may seem loose or not snug-fitting

it will function properly and is safe for use.

MAINTENANCE

TROUBLESHOOTING GUIDE

USING GRILL WITH NATURAL GAS

• Magma Natural Gas valves allow Magma grills to be installed to Natural Gas.

• Use only Magma Type 4 Low Pressure Natural Gas control valves. Visit our website at

MagmaProducts.com to view valve application guide. See your local dealer for proper hose and fittings.

Problem Possible Cause Possible Solution

Burner Will Not

Light With Match

No gas flow • Check fuel level, replace canister or refill cylinder

Obstructed gas flow • Clean burner and valve orifice.

Remove debris/spider webs

Flare-Up

Excessive cooking temperature • Operate only on low when lid is closed

• Reduce flame level

• Leave lid open

• Use water spray to cool

Grease and/or residue build-up • Clean components

Excessive fat in meats • Trim fat from cuts of meat before grilling

Excessive oils in marinades • Use non-oil based marinades

Yellow Sooty Flame

Obstructed gas flow • Clean burner and valve orifice.

Remove debris/spider webs

Blow-Out

Flame too low • Increase flame

Wind directly on burner • Block wind when opening lid

Obstructed gas flow • Clean burner and valve orifice.

Remove debris/spider webs

Hot Spots

Grill not level • Level Grill

Grease or residue build-up • Clean components

Excessive fat in meats • Trim fat from cuts of meat before grilling

Excessive oil in marinades • Use non-oil based marinades

Magma Products, Inc. guarantees this product to be free from defects in materials or workmanship to the original consumer. This guarantee is for the periods herein

speciﬁed when used under normal and reasonable conditions, one (l) year from the date of original purchase. This warranty does not include the cost of property dam-

age or any inconvenience due to the failure of the product. Nor does it cover damage due to misuse, abuse, accident, or damage resulting from transportation of the

product. Nor does it include damage resulting from the commercial use of this product. Nor does it include, on stainless steel products, "Surface Rust'; Excessive Corrosion

due to exposure to salt water; or Discoloration or Corrosion caused by exposure to excessive heat or failure to properly clean and care for the stainless steel surfaces. If

the product fails to operate due to a defect in materials or workmanship during the warranty period, the defective part will be repaired or replaced at Magma's option. If

you wish to obtain performance under this limited warranty, you should contact Magma's Customer Service Department via telephone at (562) 627-0500, or via e-mail at

[email protected], or via U.S. Postal Service mail at "Magma Products, Inc., Attention Customer Service, 3940 Pixie Ave. Lakewood, CA, 90712". The defective part,

along with proof of purchase, must be returned postage prepaid to Magma Products, Inc. We suggest that you keep your purchase receipt as we may require reasonable

proof of purchase.

In the state of California only, if reﬁnishing or replacement of the product is not commercially practicable, the retailer selling the product, or Magma Products, Inc., will

refund the purchase price paid for the product, less the amount directly attributable to use by the original consumer prior to the discovery of the nonconformity. In addition,

in the state of California only, you may take the product to the retail establishment from which it was purchased or to any retail establishment selling this product in order

to obtain performance under this warranty. All implied warranties, including the implied warranties of merchantability and ﬁtness for a particular purpose, are limited in

duration to the express warranty periods speciﬁed herein for the parts described herein. Some states do not allow limitations on how long an implied warranty lasts, so the

above limitation may not apply to you. Neither Magma dealers, nor the retail establishment selling this product has any authority to make any warranties or to promise rem-

edies in addition to or inconsistent with those stated above. Magma's maximum liability shall not exceed the purchase price of the product paid by the original consumer.

Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusions may not apply to you. The warranty gives

you speciﬁc legal rights and you may also have other rights which vary from state to state.

MAGMA and the Magma logo are registered trademarks of Magma Products, Inc. • Adventurer RV Camping Series is a trademark of Magma Products, Inc. • Patent pending.

A) (1) 3/16” Hex key wrench for lid removal.

B) Pack of (4) 1/4”-20 x 5/8” carriage bolts and

lock nuts for mounting applications.

C) Match Light Holder (included with CSA Models only)

Contents

x 4

Magma Products, Inc.

3940 Pixie Avenue, Lakewood, CA 90712 • USA

Phone (562) 627-0500 • [email protected]

MagmaProducts.com

83-600A 0319

LIMITED WARRANTY

CONTENTS

CALIFORNIA PROPOSITION 65 – WARNING – The burning of gas cooking fuel generates some by-products, which are on the list of substances, which are known

by the State of California to cause cancer or reproductive harm. California law requires businesses to warn customers of potential exposure to such substances. To mini-

mize exposure to these substances, always operate this unit according to the use and care manual, ensuring you provide good ventilation when cooking with gas.