Nexgrill 720-0896B Le manuel du propriétaire

Marque: Nexgrill

Modèle: 720-0896B

Catégorie: Barbecues

Taper: Le manuel du propriétaire

Ce manuel convient également à

Questions, problems, missing parts? Before returning to your retailer, call our customer service

department at U.S.A:1-800-913-8999, 8 a.m.-5 p.m., PST, Monday-Friday.

OUTDOOR GAS GRILL

• This instructions manual contains important information necessary for the

proper assembly and safe use of the appliance.

• Read and follow all warnings and instructions before assembling and using

the appliance.

• Keep this manual for future reference.

SERIAL # ____________________ MFG. DATE _____________ PURCHASE DATE: ____________

19000587A5

PARRILLA DE GAS PARA

EXTERIORES

GRIL À GAS EXTÉRIEUR

FOR OUTDOOR USE ONLY

Model No: 720/730-0896B

Model No: 720/730-0896E

In the State of Massachusetts, the following installation instructions apply:

• Installations and repairs must be performed by a qualified or licensed contractor, plumber, or

gasfitter qualified or licensed by the State of Massachusetts.

• If using a ball valve, it shall be a T-handle type.

• A flexible gas connector, when used, must not exceed 3 feet.

CALIFORNIA RESIDENTS ONLY - WARNING: This product and the fuels used to operate this

product (liquid propane), and the products of combustion of such fuels, can expose you to chemicals

including benzene, which is known to the State of California to cause cancer and reproductive harm.

For more information go to: www.P65Warnings.ca.gov.

¿Consultas, problemas, piezas que faltan? Antes de regresar al vendedor, comuníquese con

nuestro departamento de Servicio al Cliente llamando al U.S.A:1-800-913-8999, de 8 a.m. a 5 p.m. de lunes

a viernes; y de 8 a.m. a 12 p. m. los sábados. Asegúrese de tener disponible el número de serie, que se

encuentra en la parte interna de la puerta frontal de su parrilla.

Des questions, des problèmes, des pièces manquantes? Avant de retourner l’article au

détaillant, communiquez avec le service à la clientèle au U.S.A:1-800-913-8999, entre 8 h et 17 h HNP, du

lundi au vendredi et entre 8 h et 12 h, le samedi. Assurez-vous d’avoir votre numéro de série en main. Ce

numéro se situe à l’intérieur de la porte avant de votre barbecue.

Table of Contents

Care and Maintenance . . . . . . . . . . . . . . . . .

Trouble Shooting . . . . . . . . . . . . . . . . . . . . .

Ordering Parts . . . . . . . . . . . . . . . . . . . . . . . .

Grill Cooking Chart . . . . . . . . . . . . . . . . . .. .

Grill Recipe Suggestion . . . . . . . . . . . . . . .

Limited Warranty . . . . . . . . . . . . . . . . . . . . .

Natural Gas Conversion……………………...

Exploded View . . . . . . . . . . . . . . . . . . . . . . . .

Part List . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Safety Instruction . . . . . . . . . . . . . . . . . . . . .

Gas Hook–Up . . . . . . . . . . . . . . . . . . . . . . .

Installer Final Check List. . . . . . . . . . . . . . . .

Leak Testing . . . . . . . . . . . . . . . . . . . . . . . .

Grill Lighting Instruction . . . . . . . . . . . . . . . .

• El presente manual de instrucciones contiene información importante que lo

ayudará a armar el dispositivo correctamente y a utilizarlo de manera segura.

• Antes de armar y utilizar el dispositivo, lea y siga todas las advertencias e

instrucciones.

• Conserve el presente manual para consultas futuras.

• Ce manuel d’instructions contient d’importantes informations essentielles à

un assemblage approprié et sécuritaire de l’appareil.

• Lire et respecter tous les avertissements et toutes les instructions avant

l’assemblage et l’utilisation de l’appareil.

• Conserver ce manuel à titre de référence ultérieure.

1. Never operate this appliance unattended.

2. Never operate this appliance within 10 ft (3 m) of any structure, combustible

material or other gas cylinder.

3. Never operate this appliance within 25 ft (7.5 m) of any flammable liquid.

4. Do not fill cooking vessel beyond maximum fill line.

5. Heated liquids remain at scalding temperatures long after the cooking process.

Never touch cooking appliance until liquids have cooled to 115ºF (45ºC) or

less.

6. This appliance is not intended for and should never be used as a heater.

7. If a fire should occur, keep away from the appliance and immediately call your

fire department. Do not attempt to extinguish an oil or grease fire with water.

DANGER

If you smell gas:

1. Shut off gas to the appliance.

2 . Extinguish any open flame.

3 . Open lid.

4. If odor continues, keep away from

the appliance and immediately call

your gas supplier or your fire

department.

WARNING

1. Do not store or use gasoline or

other flammable liquids or vapors

in the vicinity of this or any other

appliance.

2. An LP cylinder not connected for

use shall not be stored in the

vicinity of this or any other

appliance.

Failure to comply with these instructions could result in a fire or explosion

that could cause serious bodily injury, death, or property damage.

Combustion by products produced when using this product contain

chemicals known to the States of California to cause cancer, birth defects, or other

reproductive harm.

Your grill will be very hot. Never lean over the cooking area while using your

grill. Do not touch cooking surfaces, grill housing, lid or any other grill parts while

the grill is in operation, or until the gas grill has cooled down after use.

DANGER

Safety Instruction

WARNING

Do not try lighting this appliance without reading the

“LIGHTING INSTRUCTIONS” section of this manual.

CAUTION: Beware of Flashback

TESTED IN ACCORDANCE WITH ANSI Z21.58-2015 •

CSA 1.6-2015 STANDARD FOR OUTDOOR COOKING

GAS APPLIANCE. THIS GRILL IS FOR OUTDOOR USE

ONLY.

CAUTION: Spiders and small insects occasionally

spin webs or make nests in the grill

burner tubes during transit and

warehousing. These webs can lead

to gas flow obstruction, which could

result in a fire in and around burner

tubes. This type of fire is known as

“FLASH-BACK” and can cause serious damage to your grill

and create an unsafe operating condition for the user.

Although an obstructed burner tube is not the only cause of

“FLASH-BACK”, it is the most common cause.

To reduce the chance of “FLASH-BACK”, you must clean the

burner tubes before assembling your grill, and at least once a

month in late summer or early fall when spiders are most

active. Also perform this burner tube cleaning procedure if

your grill has not been used for an extended period of time. A

clogged tube can be lead to a fire beneath the grill.

Grill Installation Codes

Check your local building codes for the proper method of

installation. in the absence of local codes, this unit should

be installed in accordance with the National Fuel Gas Code,

ANSI Z223.1/NFPA 54, Storage and Handling of Liquefied

Petroleum Gases, ANSI /NFPA B149.2 or CSA B149.1

Natural Gas and Propane Installation Code, and the

National Electrical Code, ANSI/NFPA 70.

Correct LP Gas Tank Use

LP gas grill models are designed for use with a standard 20

lb. Liquid Propane Gas tank, not included with grill. Never

connect your gas grill to an LP gas tank that exceeds this

capacity.

NOTE: The normal flow of gas through the regulator and

hose assembly can create a humming noise. A low volume

of noise is perfectly normal and will not interfere with

operation of the grill. If humming noise is loud and

excessive you may need to purge air from the gas line or

reset the regulator excess gas flow device. This purging

procedure should be done every time a new LP gas tank is

connected to your grill.

Visually check the burner flames prior to each use. The

flames should look like this picture. If they do not, refer to the

burner main tenancy part of this manual.

WARNING

ELECTRICAL GROUNDING INSTRUCTIONS for Rotisserie Motor-This appliance is equipped with a plug and should be

plugged directly into a properly grounded receptacle. When installed, must be electrically grounded in accordance with local

codes or in the absence of local codes, with the National Electrical Code, ANSI/NFPA 70 or the Canadian Electrical Code,

CSA C22.1 DO NOT cut or remove the grounding prong from this plug.

1. To protect against electric shock, do not immerse cord or plugs in water or other liquid.

2. Unplug from the outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts.

3. Do not operate any outdoor cooking gas appliance with a damaged cord, plug, or after the appliance malfunctions or

has been damaged in any manner. Contact the manufacturer for repair.

4. Do not let the cord hang over the edge of a table or touch hot surface.

5. Do not use an outdoor cooking gas appliance for purposes other than intended.

6. When connecting, first connect plug to the outdoor cooking gas appliance then plug appliance into the outlet.

7. Use only a Ground Fault Interrupt (GFI) protected circuit with this outdoor cooking gas appliance.

8. Never remove the grounding plug or use with an adapter of 2 prongs.

9. Use only extension cords with a 3 prong grounding plug, rated for the power of the equipments, and approved for

outdoor use with a W-A marking.

Safety Instruction

LP-Gas Supply System

• If the information is not followed exactly, a fire resulting in

death or serious injury could occur.

• A 20lb tank of approximately 12-1/4 inches in diameter by

18-1/4 inches high is the maximum size LP gas tank to use.

• The LP gas supply cylinder to be used must be constructed

and marked in accordance with the specifications for LP –

Gas cylinder of the U.S. Department of Transportation (DOT)

or the National Standard of Canada ,CAN/CSA –B339,

Cylinders, Spheres and Tubes for Transportation of

Dangerous Goods and Commission .

• The LP gas tank must have a shutoff valve terminating in an

LP valve outlet that is compatible with a Type 1. LP gas

supply cylinder must have a shut off valve terminating in a

valve outlet specified for connection type QCC1 in the

standard for compressed gas cylinder valve outlet and inlet

connection ANSI/CGA-V-1 as applicable. LP gas supply

cylinder must be fitted with an Overfill Protection Device

(O.P.D) The LP gas tank must also have a safety relief

device that has a direct connection with the vapor space of

the tank. This safety feature prevents the tank from being

overfilled, which can cause malfunction of the LP gas tank,

regulator and/or grill.

• The tank supply system must be arranged for vapor

withdrawal.

• The LP gas tank used must have a collar to protect the tank

valve.

• Place dust cap on cylinder valve outlet whenever the

cylinder is not in use. Only install the type of dust cap on the

cylinder valve outlet that is provided with the cylinder valve.

Other types of cap or plugs may result in leakage of

propane.

• Never connect an unregulated LP gas tank to your gas grill.

• This outdoor cooking gas appliance is equipped with a high

capacity hose/regulator assembly for connection to a

standard 20lb. Liquid propane cylinder.

• Have your LP gas tank filled by a reputable propane gas

dealer and visually inspected and re-qualified at each filling.

• Do not store a spare LP gas cylinder under or near this

appliance.

• Never fill the cylinder beyond 80 percent full.

• Always keep LP gas tanks in an upright position.

• Do not store or use gasoline or other flammable vapors and

liquids in the vicinity of this or any other appliance.

• Storage of an outdoor cooking gas appliance indoors is

permissible only if the cylinder is disconnected and removed

from the outdoor cooking gas appliance.

• When your gas grill is not in use the gas must be turned off

at LP gas tank.

• LP gas tank must be stored outdoors in a well-ventilated

area and out of reach of children. Disconnected LP gas tanks

must not be stored in a building, garage or any other

enclosed area.

• Do Not obstruct the flow of ventilation air around the gas grill

housing. Only use the regulator and the hose assembly

supplied with your gas grill. Replacement regulators and

hose assemblies must be those specified in this manual.

• The regulator and hose assembly must be inspected before

each use of the grill. If there is excessive abrasion or wear or

if the hose is cut, it must be replaced prior to the grill being

put into operation. The replacement hose assembly shall be

that specified by the manufacturer.

• Pressure regulator and hose assembly supplied with the

outdoor cooking gas appliance must be used. Never

substitute other types of regulator. Contact customer service

for manufacturer specified replacement parts.

• This outdoor cooking gas appliance is equipped with a

pressure regulator comply with the standard for Pressure

Regulating Valves for LP Gas ANSI/ UL 144.

• Do not use briquettes of any kind in the grill.

• The grill is designed for optimum performance without the

use of briquettes. Do not place briquettes on the radiant as

this will block off the area for the grill burners to vent. Adding

briquettes can damage ignition components and knobs, and

void the warranty.

• Keep the back and side cart free and clear from debris.

Keep any electrical supply cord, or the rotisserie motor cord

away from the heated areas of the grill.

• Never use the grill in extremely windy conditions. If located in

a consistently windy area (oceanfront, mountaintop, etc.) a

windbreak will be required. Always adhere to the specified

clearance.

• Never use a dented or rusty propane tank.

• Keep any electrical supply cord and the fuel supply hose

away from any heated surface.

• While lighting, keep your face and hands as far away from

the grill as possible.

• Burner adjustment should only be performed after the burner

have cooled.

WARNING

Your grill will get very hot. Never lean over the cooking area

while using your grill. Do not touch cooking surfaces, grill

housing, lid or any other grill parts while the grill is in

operation, or until the gas grill has cooled down after use.

Failure to comply with these instructions may result in

serious bodily injury.

CAUTION: TO ENSURE CONTINUED PROTECTION

AGAINST RISK OF ELECTRIC SHOCK, CONNECT TO

PROPERLY GROUNDED OUTLETS ONLY, TO REDUCE

THE RISK OF ELECTRIC SHOCK, KEEP EXTENSION

CORD CONNECTION DRY AND OFF THE GROUND.

• Never use your gas grill in a garage, porch, shed,

breezeway or any other enclosed area. Your gas grill is

to be used outdoors only.

Do Not install this unit into combustible enclosures.

Minimum clearance from sides and back of unit to

combustible construction, 36 inches (91cm) from sides

and 36 inches (91cm) from back.

• DO NOT use this appliance under overhead

combustible surfaces. This outdoors cooking gas

appliance is not intend to be installed in or on

recreational vehicles and/or boats.

Proper Placement And Clearance Of Grill

Safety Instruction

WARNING

Keep a spray bottle of soapy water near the gas supply

valve and check the connections before each use.

DO NOT USE ALUMINUM FOIL TO LINE THE GRILL

RACKS OR GRILL BOTTOM.

This can severely upset combustion airflow or trap

excessive heat in the control area.

SAFETY PRACTICES TO AVOID PERSONAL INJURY

When properly cared for your grill will provide safe, reliable

service for many years. However, extreme care must be

used as the grill produces intense heat that can increase

accident potential. When using this appliance basic safety

practices must be followed, including the following:

Do not repair or replace any part of the grill unless

specifically recommended in this manual. All other service

should be referred to a qualified technician.

This grill is not intended to be installed in or on recreational

vehicles or boats.

Children should not be left alone or unattended in an area

where the grill is being used. Do not allow them to sit, stand

or play in or around the grill at any time.

Do not store items of interest to children around or below the

grill.

Do not permit clothing, pot holders or other flammable

materials to come in contact with or too close to any grate,

burner or hot surface until it has cooled. The fabric could

ignite and cause personal injury.

For personal safety, wear proper apparel. Loose fitting

garments or sleeves should never be worn while using this

appliance. Some synthetic fabrics are highly flammable and

should not be worn while cooking.

Only certain types of glass, heat-proof glass ceramic,

earthenware, or other glazed utensils are suitable for grill

use. These materials may break with sudden temperature

changes. Use only on low or medium heat settings in

accordance with the manufacturer’s guidelines.

Do not heat unopened food containers. A build-up of

pressure may cause the containers to burst.

Grease is flammable. Let hot grease cool before attempting

to handle it. Avoid letting grease deposits collect in the

bottom of the grill bowl assembly and the grease tray at the

bottom of the grill’s firebox. Remove the grease from the

bottom of the grill bowl assembly and grease tray often.

Use a covered hand when opening the grill lid.

Never lean over an open grill.

When lighting a burner, pay close attention to what you are

doing. Make certain you are aware of which burner you are

lighting, so your body and clothing remain clear of open

flames.

When using the grill, do not touch the grill rack, burner

grate or immediate surroundings as these areas become

extremely hot and could cause burns. Use only dry

potholders. Moist or damp potholders on hot surfaces may

cause steam burns. Do not use a towel or bulky cloth in

place or potholders. Do not allow potholders to touch hot

portions of the grill rack.

Grease is flammable. Let hot grease cool before

attempting to handle it. Do not allow grease deposits to

collect in the grease tray at the bottom of the grill’s firebox.

Clean the grease tray often

Do not use aluminum foil to line the grill racks or grill

bottom. This can severely upset combustion air flow or trap

excessive heat in the control area.

For proper lighting and performance of the burners keep

the burner ports clean. It is necessary to clean them

periodically for optimum performance. The burners will only

operate in one position and must be mounted correctly for

safe operation.

Clean the grill with caution. To avoid steam burns, do not

use a wet sponge or cloth to clean the grill while it is hot.

Some cleaners produce toxic fumes or can ignite if applied

to a hot surface.

Turn off grill controls and make certain the grill is cool

before using any type of aerosol cleaner on or around the

grill. The chemical that produces the spraying action could,

in the presence of heat, ignite or cause metal parts to

corrode.

Do not use the grill to cook excessively fatty meats or other

products which promote flare – ups.

Do not operate the grill under unprotected combustible

constructions. Use only in well ventilated areas. Do not use

in buildings, garages, sheds, breezeways or other such

enclosed areas.

Keep the area surrounding the grill free from combustible

materials including, fluids, trash, and vapors such as

gasoline or charcoal lighter fluid. Do not obstruct the flow of

combustion and ventilation air.

WARNING

This outdoor cooking gas appliance is not intended

to be installed in or on boats. And other recreational

vehicles.

Gas Hook - Up

NEVER CONNECT AN UNREGULATED GAS

SUPPLY LINE TO THE APPLIANCE. USE THE

REGULATOR/HOSE ASSEMBLY SUPPLIED.

This is a liquid propane configured grill. Do not attempt

to use a natural gas supply unless the grill has been

reconfigured for natural gas use.

Total gas consumption (per hour) of this stainless

steel gas grill with all burners on “HIGH”:

Main burner 60,000 Btu/hr

Sear burner 15,000 Btu/hr

Total 75,000 Btu/hr

L.P. TANK REQUIREMENT

A dented or rusty L.P. tank may be hazardous and

should be checked by your L.P. supplier. Never use a

cylinder with a damaged valve. The L.P. gas cylinder

must be constructed and marked in accordance with

the specifications for L.P. gas cylinders of the U.S.

Department of Transportation (DOT) or the National

Standard of Canada, CAN/CSA-B339, Cylinders,

Spheres and Tubes for Transportation of Dangerous

Goods; and Commission, as applicable. Overfilling

prevention device (OPD) shall be provided on cylinder

& QCCI connection on the cylinder valve, ANSI/CGA-

V-1. The cylinder supply system must be arranged for

vapor withdrawal. The cylinder must include a collar to

protect the cylinder valve. The cylinder must be

provided with a shut off valve terminal in an L.P.

gas supply cylinder valve outlet specified, as applicable,

for connection type QCC1 in the standard for

compressed gas cylinder valve outlet and inlet

connection ANSI/CGA-V-1.

Manifold pressure: 11”(27.94cm) water column (W.C.).

L.P. GAS HOOK-UP

Ensure that the black plastic grommets on the LP

cylinder valve are in place and that the hose does not

come into contact with the grease tray or the grill head.

CONNECTION

Your stainless steel grill is equipped with gas supply

orifices for use only with liquid propane gas. It is also

equipped with a high capacity hose/regulator assembly

for connection to a standard 20lb. L.P. cylinder (18-1/4”

(46.35cm) high, 12-1/4”(31cm) diameter). To connect

the L.P. gas supply cylinder, please follow the steps

below:

1. Make sure tank valve is in its full off position (turn

clockwise to stop)

2. Check tank valve to assure it has proper external

male threads (type 1 connection per ANSIZ21.81)

3. Make sure all burner valves are in their off position.

4. Inspect valve connections, port, and regulator

assembly. Look for any damage or debris. Remove

any debris. Inspect hose for damage. Never attempt

to use damaged or obstructed equipment. See your

local L.P. gas dealer for repair.

5. When connecting regulator assembly to the valve,

hand tighten the quick coupling nut clockwise to a

complete stop. Do not use a wrench to tighten. Use

of a wrench may damage the quick coupling nut and

result in a hazardous condition.

6. Open the tank valve fully (counterclockwise). Apply

the soap solution with a clean brush to all gas

connections. See below. If growing bubbles appear

in the solution the connections are not properly

sealed. Check each fitting and tighten or repair as

necessary.

7. If you have a gas connection leak you cannot repair,

turn gas OFF at supply tank, disconnect fuel line

from your grill and call U.S.A:1-800-913-8999 or

your gas supplier for repair assistance.

8. Also apply soapy solution to the tank seams. See

below. If growing bubbles appear, shut tank OFF

and do not use or move it! Contact an LP gas

supplier or your fire department for assistance.

To disconnect L.P. gas cylinder:

1. Turn the burner valves off.

2. Turn the tank valve off fully (turn clockwise to stop).

3. Detach the regulator assembly from the tank valve by

turning the quick coupling nut counterclockwise.

Installer Final Check List

 Minimum clearance from sides and back of unit

to combustible construction, 36 inches (91cm)

from sides and 36 inches (91cm) from back

 All internal packaging removed.

 Knobs turn freely.

 Burners are tight and sitting properly on orifices.

 Pressure regulator connected and set. Gas

connections to grill using hose & regulator

assembly provided (pre-set for 11.0” water

column).

 Unit tested and free of leaks.

 User informed of gas supply shut off valve

location

USER, PLEASE RETAIN THIS MANUAL FOR

FUTURE REFERENCE.

PROPANE CYLINDER CAUTIONS

a) Do Not store a spare LP-gas cylinder under or

near this appliance.

b) NEVER fill the cylinder beyond 80 percent full.

c) If the information in “a” and “b” is not

followed exactly, a fire or explosion causing

death or serious injury may occur.

Leak Testing

GENERAL

Although all gas connections on the grill are leak

tested at the factory prior to shipment, a complete

Gas leak test must be performed at the

installation site due to possible mishandling in

shipment, or excessive pressure unknowingly being

applied to the unit. Periodically check the whole

system for leaks following the procedures listed

below. If the smell of gas is detected at anytime you

should immediately check the entire system for leaks.

BEFORE TESTING

Make sure that all packing material is removed from

the grill including tie-down straps.

DO NOT SMOKE WHILE LEAK TESTING.

NEVER PERFORM LEAK TEST WITH AN OPEN

FLAME.

Make a soap solution of one part liquid detergent and

one part water. You will need a spray bottle, brush, or

rag to apply the solution to the fittings. For the initial

leak test, make sure the L.P. cylinder is 80% full.

TO TEST

1. Make sure the control valves are in the “OFF”

position, and turn on the gas supply.

2. Check all connections from the L.P. gas

regulator and supply valve up to and including

the connection to the manifold pipe assembly

(the pipe that goes to the burners). Soap

bubbles will appear where a leak is present.

3. If a leak is present, immediately turn off the gas

supply and tighten the leaky fittings.

4. Turn the gas back on and recheck.

5. Should the gas continue to leak from any of the

fittings, turn off the gas supply and contact

customer service at U.S.A:1- 800-913-8999.

Only those parts recommended by the manufacturer

should be used on the grill.

Substitution will void the warranty. Do not use the grill

until all connections have been checked and do not leak.

GAS FLOW CHECK

Each grill burner is tested and adjusted at the factory

prior to shipment; however, variations in the local gas

supply may make it necessary to adjust the burners. The

flames of the burners should be visually checked.

Flames should be blue and stable with no yellow tips,

excessive noise or lifting. If any of these conditions exist,

check to see if the air shutter or burner ports are blocked

by dirt, debris, spider webs, etc. If you have any

questions regarding flame stability, please call customer

service U.S.A:1- 800-913-8999.

ALWAYS CHECK FOR LEAKS AFTER EVERY L.P.

TANK CHANGE

Check all gas supply fittings for leaks before each

use. It is handy to keep a spray bottle of soapy

water near the shut-off valve of the gas supply line.

Spray all the fittings. Bubbles indicate leaks.

TO MATCH LIGHT THE GRILL

If the burner will not light after several attempts then the

burner can be match lit.

Match light extension rod is located on the inside panel of

the door.

If you’ve just attempted to light the burner with the igniter,

allow 5 minutes for any accumulated gas to dissipate.

Keep your face and hands as far away from the grill as

possible.

Insert a lit match attached to the lighting rod through the

cooking grids to the burner.

Press the control knob and rotate left to the ‘” ” setting

continue to press the knob until the burner ignites.

Burner should light immediately.

If the burner does not light in 5 seconds turn the knob off,

wait 5 minutes and try again.

Operating Instructions

GENERAL USE OF THE GRILL AND ROTISSERIE

Each main burner is rated at 10,000 BTU/HR. The

main grill burners encompass the entire cooking area

and are side ported to minimize blockage from falling

grease and debris. The knobs are located on the lower

center portion of the control panel. Each knob is

labeled on the control panel.

USING THE GRILL

Grilling requires high heat for searing and proper

browning. Most foods are cooked at the “HIGH” heat

setting for the entire cooking time. However, when

grilling large pieces of meat or poultry, it may be

necessary to turn the heat to the lower setting after the

initial browning. This cooks the food through without

burning the outside. Foods cooked for a long time or

foods basted with a sugary marinade may need the

lower heat setting near the end of the cooking time.

NOTE: This grill is designed to grill efficiently without

the use of lava rocks or briquettes of any kind. Heat is

radiated by the stainless steel flame tamers positioned

above each burner.

NOTE: The hot grill sears the food, sealing in the juices.

The more thoroughly the grill is preheated, the faster

the meat browns and the darker the grill marks.

DO NOT LEAVE THE GRILL UNATTENDED WHILE

COOKING.

WARNING: IMPORTANT!

USING THE SEAR BURNER

Inspect the gas supply hose prior to turning the gas

“ON”. If there is evidence of cuts, wear or abrasion, it

must be replaced prior to use. Do not use the sear

burner if the odor of gas is present.

Grill Lighting Instructions

WARNING: IMPORTANT!

BEFORE LIGHTING

Inspect the gas supply hose prior to turning the gas

“ON”. If there is evidence of cuts, wear, or abrasion,

it must be replaced prior to use. Do not use the grill

if the odor of gas is present. Only the pressure

regulator and hose assembly supplied with the unit

should be used.

Never substitute regulators and hose assembly for

those supplied with the grill. If a replacement is

necessary, contact the manufacturer for proper

replacement. The replacement must be that

specified in the manual.

WARNING: Always keep your face and body as

far away from the burner as possible when

lighting.

TO LIGHT THE MAIN BURNER

Make sure all knobs are “OFF” then turn on the gas

supply from the LP (Liquid Propane) tank. Always

keep your face and body as far from the grill as

possible when lighting.

To light your main burner, push and turn main

burner control knob to“ ”, at the same time,

press and hold electronic ignition button to light the

burner. Once the burner is lit, release the electronic

ignition button and knob. If the burner does not light

wait 5 minutes for any excess gas to dissipate and

then retry.

TO LIGHT THE SEAR BURNER

To light the sear burner, remove any cooking utensils

from the burner grate. Push and turn the control knob to

“ ”, at the same time, press and hold electronic

ignition button to light the burner . Once the burner is lit,

release the electronic ignition button and knob. If the

burner does not light, turn the control knob to “○”. If the

smell of gas is detected and the igniter is not functioning,

immediately turn the control knob to “○”. Allow 5 minutes

for any accumulated gas to dissipate. If the sear burner

igniter is not functioning, see the following section for

match lighting.

Grill Lighting Instructions

TO MATCH LIGHT THE SEAR BURNER

Hold a lit extended match near the sear burner ports, turn

the control knob counterclockwise to “ ”. Move your

hand immediately once the burner is lit. Rotate the control

knob to the desired setting.

Keep a spray bottle of soapy water near the gas

supply valve and check the connections before

each use.

Do not attempt to light the grill if odor of gas is

present. Call for service U.S.A:1-800-913-8999.

Each burner is adjusted prior to shipment; however,

variations in the local gas supply may make minor

adjustments necessary.

Note: Remove all packaging, including straps, before using the grill

Sear Burner

CAUTIONS

Place dust cap on cylinder valve outlet when the

cylinder is not in use. Only install the type of dust cap

on the cylinder valve outlet that is provided with the

cylinder valve. Other types of caps or plugs may

result in leakage of propane.

The gas must be turned off at the supply cylinder

when the unit is not in use.

If the appliance is stored indoors the cylinder must be

disconnected and removed from the appliance.

Cylinders must be stored outdoors in a well-ventilated

area out of the reach of children.

Main Burner

Component Identification

Control Knob, Label

Push In

Lighting Instructions

1. If the burner will not light after several attempts then the burner can be match lit, before using the match

allow 5 minutes for any accumulated gas to dissipate.

2. Clip a match on one end of the lighting rod.

3. Light match.

4. Hold lighting rod and insert lighted match right next to the burner ports or ceramic file.

5. Push and turn the designated control knob to .

6. Burner should ignite immediately.

Match light

Main burner

Sear burner

CAUTION

1. Keep outdoor cooking gas appliance area clear and

free from combustible materials, gasoline and other

flammable vapors and liquids.

2. Do not obstruct the flow of combustible and

ventilation air.

3. Keep the ventilation openings of the cylinder

enclosure free and clear from debris.

Care and Maintenance

STAINLESS STEEL

There are many different stainless steel cleaners available.

Always use the mildest cleaning procedure first, scrubbing in

the direction of the grain. Do not use steel wool as it will

scratch the surface. To touch up noticeable scratches in the

stainless steel, sand very lightly with dry 100 grit emery paper

in the direction of the grain. Specks of grease can gather on

the surfaces of the stainless steel and bake on to the surface

and give the appearance of rust. For removal use a mild

abrasive pad in conjunction with a stainless steel cleaner.

GRILL GRATE

The easiest way to clean the grill is immediately after cooking

is completed and after turning off the flame. Wear a barbeque

mitt to protect your hand from the heat and steam. Dip a brass

bristle barbeque brush in water and scrub the hot grill. Dip the

brush frequently in the bowl of water. Steam, created as water

contacts the hot grill, assists the cleaning process by

softening any food particles. If the grill is allowed to cool

before cleaning, cleaning will be more difficult.

ENSURE THAT THE GAS SUPPLY AND THE KNOBS ARE

IN THE “OFF” POSITION. MAKE SURE THE RANGE TOP

BURNER IS COOL BEFORE REMOVAL.

GRILL BURNERS

Extreme care should be taken when moving a burner as it

must be correctly centered on the orifice before any attempt is

made to relight the grill. Frequency of cleaning will depend on

how often you use the grill.

MAIN GRILL BURNER CLEANING

Ensure the gas supply is off and the knobs are in the “OFF”

position. Make sure the grill is cool. Clean the exterior of the

burner with a wire brush. Clear stubborn scale with a metal

scraper. Clear any clogged ports with a straightened paper

clip. Never use a wooden toothpick as it may break off and

clog the port. Please note if insects or other obstructions are

blocking the flow of gas through the burner, and if so you will

need to call our customer service line U.S.A:1-800-913-8999.

GREASE TRAY CLEANING

The grease tray should be emptied and wiped down

periodically and wash with a mild detergent and warm water

solution. A small amount of sand may be placed in bottom of

grease tray to absorb the grease. Check the grease tray

frequently, do not allow excess grease to accumulate and

overflow out of the grease tray.

Warning: If you wish to replace main burner, we

strongly recommend that you hire a

professionally trained technician to replace it.

Please understand that we will not be responsible

for any liability, personal injury, or property

damage resulting from an improperly assembled

burner.

HOW TO REPLACE MAIN BURNER

Step 1. Remove the main burner “R” pin on the back wall

of fire box by using needle nose pliers. Use a flathead

screwdriver to remove burner pin cover, then remove the

burner on the front wall of fire box, as shown below.

Step 2. Insert the burner onto the orifice and secure the

burner pin cover on the burner, as shown below, make

sure burner hole aim at orifice .

Step 3. Secure the main burner on the back wall of fire box

with “R” Pin.

Trouble Shooting

SPIDER AND INSECT WARNING

Checking and cleaning burner/ venturi tubes for insects and insect nests. A clogged tube can lead to a fire beneath the grill.

Although an obstructed burner tube is not the only cause of “FLASH-BACK”, it is the most common cause.

To reduce the chance of “FLASH-BACK”, you must clean the burner tubes before assembling your grill, and at least once a

month in late summer or early fall when spiders are most active. Also perform this burner tube cleaning procedure if your grill

has not been used for an extended period of time.

WHEN TO LOOK FOR SPIDERS

You should inspect the burners at least once a year or immediately after any of the following conditions occur:

1. The smell of gas in conjunction with the burner flames appearing yellow.

2. The grill does not reach temperature.

3. The grill heats unevenly.

4. The burners make popping noises.

BEFORE CALLING FOR SERVICE

If the grill does not function properly, use the following check list before contacting your dealer for service. You may save the

cost of a service call.

PREHEATING: The grill lid should be in a closed position during the preheat time period. It is necessary to preheat the grill

before cooking certain foods, depending on the type of food and the cooking temperature. Food that requires a high cooking

temperature needs a pre-heat

period of five minutes; food that requires a lower cooking temperature needs only a period of two to three minutes.

COOKING TEMPERATURES

High setting-Use this setting for fast warm-up, for searing steaks and chops, and grilling.

Low setting-Use this setting for all roasting, baking, and when cooking very lean cuts such as fish.

These temperatures vary with the outside temperature and the amount of wind.

Cooking with in-direct Heat: You can cook poultry and large cuts of meat slowly to perfection on one side of the grill by

indirect heat from the burner on the other side. Heat from the lit burner circulates gently throughout the grill, cooking the meat

or poultry without any direct flame touching it. This method greatly reduces flare-ups when cooking extra fatty cuts, because

there is no direct flame to light the fats and juices that drip down during cooking.

CAUTION: If burners go out during operation, close gas supply at source, and turn all gas valves off. Open lid and wait five

minutes before attempting to relight (this allows accumulated gas fumes to clear).

CAUTION: Should a grease fire occur, close gas supply at source, turn off all burners and leave lid closed until fire is out.

CAUTION: DO NOT attempt to disconnect any gas fitting while your grill is in operation. As with all appliances, proper care

and maintenance will keep them in top operating condition and prolong their life. Your gas gill is no exception.

CAUTION: Side burner lid will get hot if used when lid is closed.

Trouble Shooting

PROBLEM SOLUTION

When attempting to light my grill, it

will not light immediately.

Make sure you have a spark while you are trying to light the burner (if no

spark) . Check if the battery is installed properly.

Ensure that the wire is connected to the electrode assembly.

Clean wire (s) and / or electrode with rubbing alcohol and a clean swab.

Wipe with a clean cloth.

Check to see if the other burners operate. If so. Check the gas orifice on

the malfunctioning burner for an obstruction.

Rotisserie burner will not light when

the igniter button is pushed.

Check to see if debris is blocking the electrode.

Check to see if there is a spark that jumps to the burner from the

electrode. If no spark is seen, check the battery located inside the igniter

box. To open turn counter

Does the infrared back burner light when attempting to light with a

match ? If not, check to ensure the gas is on.

Regulator makes noise. Vent hose on the regulator may be plugged or regulator may be faulty.

Ensure the vent hole on the regulator is not obstructed. Clear the hole,

close the gas control valves. Wait ten minutes and re-start.

Check your flames for proper performance. If the flames are not correct,

replace regulator.

Full size cover does not fit the grill. Cover may be incorrect for your grill. It may be a tight fit.

Ensure the cover is the correct length for your grill.

Measure it left to right. Compare to the grill’s measurement.

Compare the location and size of the hood portion of the cover to your

grill.

Spread the cover and allow it to relax, preferably in warm sunlight or in a

warm room.

For grill with a side shelf bunch the cover like a sock, put on left to right.

Rotisserie motor will not turn Ensure the motor is connected to a properly grounded power supply.

Ensure the on / off switch is in the on position.

Ensure that the spit is fully inserted into the rotisserie motor.

Ensure that the load does not exceed the 40 pounds operational

capacity.

Ensure that there is no encumbrance or drag.

Grill only heats to 200-300 degrees. Check to see if the fuel hose is bent or kinked.

Make sure the grill area is clear of dust.

Make sure the burner and orifices are clean.

Check for spiders and insects.

The regulator has a safety device that restricts the flow of gas in the

event of a leak. This safety device can be triggered without a gas leak.

To reset the safety device, turn off all burners and close the LP tank

valve. Disconnect the regulator from the LP tank and wait one minute.

Reconnect the regulator to the LP tank and slowly open the LP tank

valve until the valve is fully open. Light all burners and observe the

temperature.

Grill takes a long time to preheat. Normal preheat 500-600 degrees, takes about 10-15 min. Cold weather

and wind may effect your preheat time.

If you are using volcanic rock or briquettes they can increase the preheat

time and maximum temperature.

Burner flames are not light blue. Too much or not enough air for the flame.

Elevation is the principal cause, however cold weather can affect the

mixture. Burner adjustment may be required.

Grill is in a windy location.

Ordering Parts

HOW TO ORDER REPLACEMENT PARTS

To make sure you obtain the correct replacement part (s)

for your gas grill, please refer to the parts list on pages

68. The following information is required to assure

getting the correct part. Please note the shipping cost

for the delivery of any replacement parts will be on

yourself.

•Gas grills model number (see data sticker on grill).

•Part number of replacement part needed.

•Description of replacement part needed.

•Quantity of parts needed.

To obtain replacement parts, contact our customer

service hotline, U.S.A:1- 800-913-8999.

IMPORTANT

Use only factory authorized parts. The use of any part

that is not factory authorized can be dangerous. This will

also void your warranty.

Keep this assembly and operating instruction manual for

convenient referral, and for replacement parts ordering.

Grill Hints

The doneness of meat, whether rare, medium, or

well done, is affected to a large degree by the

thickness of the cut. Expert chefs say it is

impossible to have a rare doneness with a thin cut

of meat.

The cooking time is affected by the kind of meat,

the size and shape of the cut, the temperature of

the meat when cooking begins, and the degree of

doneness desired.

When defrosting meats it is recommended that it

be done overnight in the refrigerator as opposed to

a microwave. This in general yields a juicier cut of

meat.

Use a spatula instead of tongs or a fork to turn the meat,

as a spatula will not puncture the meat and let the juices

run out.

To get the juiciest meats, add seasoning or salt after the

cooking is finished on each side and turn the meat only

once (juices are lost when the meat is turned several

times). Turn the meat just after the juices begin to bubble

to the surface.

Trim any excess fat from the meat before cooking. To

prevent steaks or chops from curling during cooking, slit

the fat around the edges at 2-inch intervals.

DO NOT LEAVE THE GRILL UNATTENDED WHILE

COOKING.

Grill Cooking Chart

FOOD

WEIGHT OR

THICKNESS

HEAT

SETTING

APPROXIMATE

TIME

SPECIAL INSTRUCTIONS

AND TIPS

Vegetables

Slice. Dot with butter or margarine. Wrap in heavy -duty

foil. Grill, turning occasionally.

Fresh Beets Carrots

Turnips Medium 12 to 20 minutes

Grill, turning once. Brush occasionally with

melted butter or margarine.

Onion 1/2 inch slices Medium 8 to 20 minutes Season with Italian dressing, butter, or margarine.

Potatoes Sweet

White

Whole

6 to 8 ounces

Medium

High

40 to 60 minutes

45 to 60 minutes

Wrap individually in heavy - duty foil. Grill,

rotating occasionally.

Frozen Asparagus

Peas Green beans

Sprouts Medium 15 to 30 minutes

Dot with butter or margarine.

Wrap in heavy -duty foil. Grill, turning occasionally.

Grill Cooking Chart continued

FOOD

WEIGHT OR

THICKNESS

HEAT

SETTING

APPROXIMATE

TIME

SPECIAL INSTRUCTIONS

AND TIPS

French fries Medium 15 to 30 minutes

Place in aluminum foil pan.

Grill, stirring occasionally

Meats

Beef

Hamburgers 1/2 to 3/4 inch

Medium

10 to 18 minutes

Grill, turning once when juices rise to the surfaces.

Do not leave hamburgers unattended since a flare-up could

occur quickly. Cook to internal temperature of 160 degrees

Tenderloin High 8 to 15 minutes

Rare 1 inch High 8 to 14 minutes

Trim edges. Grill, turning once

Medium

1-1/2 inch

1 inch

1-1/2 inch

High

Medium

to High

11 to 18 minutes

12 to 22 minutes

16 to 27 minutes

Well - done

1 inch

1-1/2 inches

Medium

18 to 30 minutes

16 to 35 minutes

Lamb

Chop & Steaks

Rare

1 inch

1-1/2 inch

Medium

High

10 to 15 minutes

14 to 18 minutes

Trim edges. Grill, turning once.

Medium

1 inch

1-1/2 inch

Medium

High

13 to 20 minutes

18 to 25 minutes

Pork

Chops

1 inch Medium 20 to 30 minutes

Trim edges. Grill, turning once. Cook to desired

doneness.

Well -done 1 -1/2 inches Medium 30 to 40 minutes

Ribs Medium 30 to 40 minutes

Grill, turning occasionally.

During last few minutes brush with barbecue sauce. Turn

several times.

Ham steaks

(precooked)

1 inch slices High 4 to 8 minutes Trim edges. Grill, turning once.

Hot dogs Low 5 to 10 minutes Slit skin. Grill, turning once.

Poultry

2 to 3 pounds

Low

Medium

Up to 1 hour Place skin side up. Grill, turning and brushing frequently with

melted butter, margarine, oil or marinade.

Breasts

well –done

Medium 30 to 45 minutes Marinate as desired.

Fish and

Seafood

Halibut

Salmon

Swordfish

3/4 to 1 inch Medium

High

8 to 15 minutes

Grill, turning once. Brush with melted butter, margarine or oil

to keep moist.

Whole

Catfish

Rainbow trout

4 to 8 ounce Medium

High 12 to 20 minutes

Grill, turning once. Brush with melted butter, margarine or oil.

Brush with melted butter and lemon juice.

Grill Recipe Suggestion

BBQ SALMON

2 large salmon steaks

2 tbs. Oil

Salt & pepper

2 oz. thin bacon slices

2 tbs. Butter

1 tbs. Lemon juice

Spring of parsley

Lemon wedges

Preheat the BBQ.

Brush the steaks with oil and season

with salt and pepper. Place on BBQ

grill and cook for 10 minutes, turning

steaks over halfway cooking time.

Meanwhile, fry the bacon in a pan on

the side burner. Drain on paper towels.

Melt the butter in a small saucepan

taking care not to discolor it. Arrange

the fish and bacon on serving plates.

Pour the butter over and sprinkle with

lemon juice. Garnish with parsley

springs and lemon wedges. Serve with

boiled potatoes tossed in butter and

sprinkled with chopped parsley and a

crisp lettuce salad.

Note: Substitute catfish, halibut or cod

for salmon.

BAKED CHILI CORN

6 medium ears corn, husked

3 tbs. Butter or margarine, melted

Dash ground cumin

Dash ground coriander

About ½ hour before cooking, turn the

butter on for grill. Place each corn on a

heavy-duty foil. In a bowl, combine

remaining ingredients. Mix well. Brush

1-1/2 tsp. Butter mixture over each ear.

Close foil and fold up ends to seal.

Place on grill. Cook, turning packets

occasionally 10 to 12 minutes or until

cooked through.

TANGY SEAFOOD KABOBS

1 lb. Large shrimp, shelled & deveined

¾ lbs. sea scallops

2/3 c. chili sauce

¼ c. cider vinegar

butter and sprinkled with chopped

parsley and a crisp lettuce salad.

In medium bowl, combine shrimp and

scallops. In small bowl combine chili

sauce and next six ingredients. Pour

over seafood. Toss to coat.

Cover, refrigerate 2 hours.

3 tbs. chopped parsley

1 tbs. vegetable oil

1 tbs. Worcestershire sauce

½ tsp. prepared horseradish

1 cove garlic, minced

1 20 oz. Can pineapple chunks in juice,

drained half hour before cooking, turn

the burner to the grill on full. Drain

seafood reserving marinade. On each

of twelve 10” skewers, thread 2

shrimps and 2 scallops, alternating with

pineapple chunks. Place skewers on

grill. Cook 7-10 minutes, often basting

and turning.

PORK CHOPS

4 Pork chops

Marinade

1 large onion

2 tbs. lemon juice or vinegar

2 tbs. oil

½ tsp. powdered mustard

2 tsp. Worcestershire sauce

½ tsp. freshly ground black pepper

1 tsp. sugar

½ tsp. paprika

1 clove garlic

Peel, grate onion, and add rest of the

ingredients except the pork chops. Mix

well. Pour over chops and marinate

one hour in a cool place. Turn the BBQ

grill on full. Heat 10 minutes.

BBQ the chops brushing with the

marinade occasionally. Serve with

mixed salad, dressed with vinaigrette

flavored with fresh dill.

BARBECUED LONDON BROIL

4 to 6 servings

¾ c. Italian dressing

1 tsp. Worcestershire sauce

1 tsp. dry mustard

¼ tsp. thyme, crushed

1 medium onion, sliced

1 pound flank steak, scored

2 tbs. butter, melted

Combine first 4 ingredients, add onion

and marinade flank steak with it.

Refrigerate at least 4 hours or

overnight. Remove steak and grill on

your preheated BBQ grill. Grill 5 to 7

minutes on each side basting

frequently with the marinade. In the

meantime sauté onions from the

marinade in butter in a skillet on your

side burner for 3 minutes. To serve,

slice steak diagonally into thin slices,

sprinkle onions over top. Garnish with

vegetable kabobs.

BARBECUED POTATOES and

CHEESE

1-1/2 cups shredded cheddar cheese

1 can (10-3/4 oz.) condensed cream

of mushroom soup

1/3 cup milk

2 tbs. barbecue sauce

¼ tsp. oregano

¼ tsp. salt

1/8 tsp. pepper

4 cups thinly sliced potatoes (4

medium-sized potatoes)

Preheat grill. Combine cheese,

condensed soup, milk, BBQ sauce,

oregano, salt and pepper in a large

mixing bowl. Stir in potatoes until well

coated. Turn into well buttered1-1/2

quart rectangular baking dish. Cover

dish with aluminum foil. Bake covered

25 minutes on medium with the lid of

your BBQ grill closed. Remove foil

and continue baking 15 minutes

longer or until potatoes are tender. Let

stand 5 minutes before serving.

VEGETABLE KABOBS

3 medium-sized zucchini

12 cherry tomatoes

12 fresh mushrooms

Grated Parmesan cheese

Parboil whole zucchini 5 minutes on

your side burner or until just tender.

Drain and cut into ½ inch slices.

Thread zucchini, tomatoes and

mushrooms alternately on each of six

skewers. Brush with marinade made

of Italian dressing, Worcestershire

sauce, mustard and thyme. Grill 5 to 7

minutes turning and basting

occasionally. Sprinkle liberally with

Parmesan cheese.

Grill Recipe Suggestion

FAJITAS

1-1/2 lb. flank steak or boned chicken

breasts

2 tbs. oil

½ cup limejuice

½ tsp. salt

½ tsp. celery salt

¼ tsp. garlic powder

½ tsp. pepper

¼ tsp. oregano

¼ tsp. cumin

Flour tortillas lemon

Pound flank steak to ¼ inch thickness

or flatten chicken breasts. Mix oil, lime

juice and seasonings in a zip lock bag.

Add meat and shake bag to coat the

meat. Refrigerate overnight or at least

6 to 8 hours. Wrap tortillas in foil.

Remove meat from marinade. Cook on

a preheated gas grill for 5 to 8 minutes

on each side. While meat is cooking,

heat tortillas on grill. Slice meat across

grain in thin slices. Place on hot platter.

Squeeze lemon juice over. Wrap meat

and any of the following toppings in

tortillas: chopped tomatoes, guacamole,

sour cream, taco sauce.

BEEF AND LAMB KABOBS

Serve 4

½ lb. boneless sirloin or beef cut into 1”

cubes

½ lb. boneless loin of lamb cut into 1”

cubes

2/3 c. water, divided

¼ c. chopped onion

2 tbs. soy sauce

¼ c. vegetable oil, divided

1 tbs. dark brown sugar

1 tbs. fresh lemon juice

2 cloves garlic, minced

¼ tsp. ground cumin

¼ tsp. ground coriander

¼ tsp. ground turmeric

1/8 tsp. ground red pepper

1/8 tsp. ground ginger

1 red pepper cut into chunks

1 large banana, cut into chunks

8 small mushrooms

1/3 c. smooth peanut butter

In blender, process 1/3 c. water, onion,

soy sauce, 2 tsp. oil and the next 8

ingredients until smooth. Pour over

meat cubes and marinate about 4

hours, turning occasionally. Drain and

reserve marinade. Onto to four 12”

skewers alternately thread meat,

pepper, banana and mushrooms.

Preheat grill. Brush the kabobs with oil.

Grill 7-8 minutes each side.

Bring marinade to boil on the side

burner in a saucepan. Add remaining

1/3 c. water and peanut butter. Stir to

blend. Heat through. If sauce gets too

thick, add 1 tbs. water. Serve sauce

with kabobs.

EGGPLANT CAVIAR

1 large eggplant

2 tbs. olive oil

2 tbs. wine vinegar

2 tbs. finely chopped onion

½ clove garlic, minced

1 medium tomato, chopped salt and

pepper

Roast eggplant on gas grill over

medium flame, turning occasionally

until thoroughly cooked. This may take

30 minutes. Remove from grill and cool

for handling. Strip off the skin and chop

eggplant finely. Add all the seasonings.

Chill thoroughly and serve on toast.

CHICKEN TANDOORI STYLE

8 large chicken thighs or drumsticks

1 c. plain nonfat yogurt

½ c. lemon juice

2 tsp. salt

½ tsp. cayenne

½ tsp. black pepper

½ tsp. crushed garlic

½ tsp. grated ginger

1 tbs. corn oil

Combine all the ingredients in a large

mixing bowl and marinate the chicken

for 8 hours in the refrigerator. Drain the

chicken and spread on the spit running

the rod on the fleshier side of the bone.

Roast using the rotisserie burner. Cook

on medium high heat for 40 minutes

basting occasionally with the remainder

of the marinade mixture. Serve with

sliced onions and lemon wedges.

SPARE RIBS

Marinade:

1 c. soy sauce

½ c. honey

½ c. vinegar

½ c. dry sherry

2 tsp. chopped garlic

2 tsp. sugar

1 c. water

1 chicken bouillon cube

1 can beer for basting sauce

Marinade ribs for 3 hours. Use

marinade for basting by adding beer

to it. Place pan under the ribs and

baste frequently. To cook ribs select

lean, meaty ribs and accordion pleat

them with your spit. Slide four prong

meat hook down the length of spit and

tighten. At the beginning of

the rack and to its center, penetrate

the second rib with the pointed end of

the spit and push it between the meat.

Skip a couple and continue the

process until the entire rack is

accordion pleated. Fasten the second

meat hook into the rack. Turn your

rotisserie burner on high. Roast for 50

minutes or until done.

PORK ROAST

Apple cider vinegar basting sauce:

1 c. apple cider vinegar

6 oz. water

½ stick butter

Salt, pepper, parsley and garlic

seasoning

2 oz. lemon juice

10 lbs. pork roast

Time: 1-1/2 hours to 2 hours

Bring pork to room temperature

before placing it on the spit rod. Place

on the rod and test for balance. Light

rotisserie burner. Turn control knob to

high. Use the above basting sauce for

rotissing.

TURKEY

12 lb. turkey

Beer basting sauce:

1 can beer

12 oz. water

1 stick butter

1 tsp. salt

1 tsp. pepper

½ tsp. garlic flakes

1 tsp. parsley

Thaw the bird completely. Wash

inside out. Securely tie the legs and

wings. Light rotisserie burner. Turn to

high. Combine all the ingredients for

basting sauce in a shallow pan. Place

it under the turkey 15 to 20 minutes.

Cook for approximately 3 hours. The

basting sauce combined with turkey

drippings makes a delicious gravy.

LIMITED WARRANTY (Model # 720/730-0896B & 720/730-0896E)

The manufacturer warrants to the original consumer-purchaser only that this product (Model #720/730-0896B & 720/730-0896E) shall be free

from defects in workmanship and materials after correct assembly and under normal and reasonable home use for the periods indicated below

beginning on the date of purchase. The manufacturer reserves the right to require photographic evidence of damage, or that defective parts be

returned, postage and/or freight pre-paid by the consumer, for review and examination. Nexgrill’s obligation is limited to repair, replacement, or

depreciated value, at the option of Nexgrill.

• TUBE BURNERS: 8 year LIMITED warranty against perforation.

• COOKING GRIDS and FLAME TAMERS: 1 year LIMITED warranty; does not cover dropping, chipping, scratching, or surface damage.

• STAINLESS STEEL PARTS: 1 year LIMITED warranty against perforation; does not cover cosmetic issues like surface corrosion, scratches

and rust.

• ALL OTHER PARTS: 1 year LIMITED warranty (Includes, but not limited to, valves, frame, housing, cart, control panel, igniter, regulator, hoses)

*Does not cover chipping, scratching, cracking surface corrosion, scratches or rust.

Upon consumer supplying proof of purchase as provided herein, Manufacturer will repair or replace the parts which are proven defective during

the applicable warranty period. Parts required to complete such repair or replacement shall be free of charge to you except for shipping costs, as

long as the purchaser is within the warranty period from the original date of purchase. The original consumer-purchaser will be responsible for all

shipping charges of parts replaced under the terms of this limited warranty. This limited warranty is applicable in the United States and Canada

only, is only available to the original owner of the product and is not transferable. Manufacturer requires reasonable proof of your date of

purchase. Therefore, you should retain your sales receipt and/or invoice. If the unit was received as a gift, please ask the gift-giver to send in the

receipt on your behalf, to the below address. Defective or missing parts subject to this limited warranty will not be replaced without registration or

proof of purchase. This limited warranty applies to the functionality of the product ONLY and does not cover cosmetic issues such as scratches,

dents, corrosions or discoloring by heat, abrasive and chemical cleaners or any tools used in the assembly or installation of the appliance,

surface rust, or the discoloration of stainless steel surfaces. Surface rust, corrosion, or powder paint chipping on metal parts that does not affect

the structural integrity of the product is not considered a defect in workmanship or material and is not covered by this warranty. This limited

warranty will not reimburse you for the cost of any inconvenience, food, personal injury or property damage. If an original replacement part is not

available, a comparable replacement part will be sent. You will be responsible for all shipping charges of parts replaced under the terms of this

limited warranty.

MANUFACTURER WILL NOT PAY FOR:

•Service calls to your home.

•Repairs when your product is used for other than normal, single-family household or residential use.

•Damage resulting from accident, alteration, misuse, lack of maintenance/cleaning, abuse, fire, flood, acts of God, improper installation, and

installation not in accordance with electrical or plumbing codes or misuse of product.

•Any food loss due to product failures.

•Replacement parts or repair labor costs for units operated outside the United States or Canada.

•Pickup and delivery of your product.

•Postage fees or photo processing fees for photos sent in as documentation.

•Repairs to parts or systems resulting from unauthorized modifications made to the product.

•The removal and/or reinstallation of your product.

•Shipping cost, standard or expedited, for warranty/non warranty and replacement parts.

DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF REMEDIES

Repair or replacement of defective parts is your exclusive remedy under the terms of this limited warranty. Manufacturer will not be responsible

for any consequential or incidental damages arising from the breach of either this limited warranty or any applicable implied warranty, or for failure

or damage resulting from acts of God, improper care and maintenance, grease fire, accident, alteration, replacement of parts by anyone other

than manufacturer, misuse, transportation, commercial use, abuse, hostile environments (inclement weather, acts of nature, animal tampering),

improper installation or installation not in accordance with local codes or printed manufacturer instructions.

THIS LIMITED WARRANTY IS THE SOLE EXPRESS WARRANTY GIVEN BY THE MANUFACTURER. NO PRODUCT PERFORMANCE

SPECIFICATION OR DESCRIPTION WHEREVER APPEARING IS WARRANTED BY MANUFACTURER EXCEPT TO THE EXTENT SET

FORTH IN THIS LIMITED WARRANTY. ANY IMPLIED WARRANTY PROTECTION ARISING UNDER THE LAWS OF ANY STATE,

INCLUDING IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR USE, IS HEREBY LIMITED IN

DURATION TO THE DURATION OF THIS LIMITED WARRANTY.

Neither dealers nor the retail establishment selling this product has any authority to make any additional warranties or to promise remedies in

addition to or inconsistent with those stated above. Manufacturer's maximum liability, in any event, shall not exceed the documented purchase

price of the product paid by the original consumer. This warranty only applies to units purchased from an authorized retailer and or re-seller.

NOTE: Some states do not allow an exclusion or limitation of incidental or consequential damages, so some of the above limitations or exclusions

may not apply to you; this limited warranty gives you specific legal rights as set for herein. You may also have other rights which vary from state

to state.

If you wish to obtain performance of any obligation under this limited warranty, you should write to:

Nexgrill Customer Relations

14050 Laurelwood PI

Chino, CA 91710

All consumer returns, parts orders, general questions, and troubleshooting

assistance can be acquired by calling U.S.A:1-800-913-8999

Natural Gas Conversion for Model# 720/730-0896B/E

WARNING! FAILURE TO HEED THESE WARNINGS COULD RESULT IN A FIRE OR EXPLOSION THAT

COULD CAUSE SERIOUS BODILY INJURY, DEATH OR PROPERTY DAMAGE.

Natural Gas Conversion must be performed by a QUALIFIED GAS TECHNICIAN ONLY. The QUALIFIED GAS

TECHNICIAN should ensure compliance of local codes, including but not limited to, requirements and installation

of grill regulator. DO NOT ATTEMPT TO CONVERT YOURSELF. Improper conversion could result in a gas leak

which could cause a fire or explosion and cause serious bodily injury, death or property damage. Leaks due to

improper conversion could occur immediately or slowly over time. If you hear any unusual noises or leaks, smell

gas or unusual odors, or notice anything unusual with the operation of your gas appliance after the installation,

immediately shut off the gas supply and discontinue use until the appliance is repaired by a QUALIFIED GAS

TECHNICIAN.

Orifice Chart

The different burner valves in this grill have different BTU ratings. This means that the amount of gas coming

from each orifice varies in order to create the BTU's. The holes in the orifices themselves are drilled to different

sizes so as to allow the proper amount of gas to flow through them. Please note the chart below as an easy

reference for the various orifice opening sizes for the different valves in the grill.

720-0896B/E,730-0896B/E orifice sizes

Liquid Propane (LP) Natural Gas (NG)

Components Orifice Size BTU Orifice Size BTU

Main Burner 0.94mm 10,000 1.54mm 10,000

Sear Burner 1.15mm 15,000 1.90mm 15,000

Below parts are needed for natural gas conversion:

INCLUDED

Natural gas orifices

NOT INCLUDED

Quick Connector

10 ft (3.0m) Natural Gas Hose

4” Water Column Regulator with Hose

Tools

6 mm Nut Driver

6 mm Wrench

Hex Key

6mm

Tools that will be needed for conversion:

House

Supply Line

Quick Connector

10’ NG Hose

4” WC

Regulator

with Hose

Gas Grill

Connection

La page est en cours de chargement...

Nexgrill 720-0896B Le manuel du propriétaire

Marque: Nexgrill

Modèle: 720-0896B

Catégorie: Barbecues

Taper: Le manuel du propriétaire

Ce manuel convient également à

Télécharger le PDF

rapport

dans d''autres langues

English: Nexgrill 720-0896B Owner's manual
español: Nexgrill 720-0896B El manual del propietario

Documents connexes

Nexgrill 720-0925P Manuel utilisateur

Nexgrill 720-0896B Le manuel du propriétaire

Ce manuel convient également à

Nexgrill 720-0896B Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents