Vizio S3820w-C0NA Guide de démarrage rapide

QUICK START GUIDE

Model: S3820w-C0NA

VIZIO

• Do not overload power strips and extension cords. Overloading can result in ﬁre or electric

shock.

• The wall socket should be located near your Unit and be easily accessible

• Keep your Unit away from moisture. Do not expose your Unit to rain or moisture. If water penetrates into your Unit,

unplug the power cord and contact your dealer. Continuous use in this case may result in ﬁre or electric shock.

• Do not use your Unit if any abnormality occurs. If any smoke or odor becomes apparent, unplug the power cord

and contact your dealer immediately. Do not try to repair your Unit yourself.

• Avoid using dropped or damaged appliances. If your Unit is dropped and the housing is damaged, the internal

components may function abnormally. Unplug the power cord immediately and contact your dealer for repair.

Continued use of your Unit may cause ﬁre or electric shock.

• Do not install your Unit in an area with heavy dust or high humidity. Operating your Unit in environments with

heavy dust or high humidity may cause ﬁre or electric shock.

• Ensure that the power cord and any other cables are unplugged before moving your Unit.

• When unplugging your Unit, hold the power plug, not the cord. Pulling on the power cord may damage the wires

inside the cord and cause ﬁre or electric shock. When your Unit will not be used for an extended period of time,

unplug the power cord.

• To reduce risk of electric shock, do not touch the connector with wet hands.

• Insert the remote control batteries in accordance with instructions. Incorrect polarity may cause the battery to

leak which can damage the remote control or injure the operator.

• See the important note and rating located on the back of the unit.

• WARNING - This equipment is not waterproof. To prevent a ﬁre or shock hazard, do not place any container ﬁlled

with liquid near the equipment (such as a vase or ﬂower pot) or expose it to dripping, splashing, rain, or moisture.

• CAUTION - Danger of explosion or ﬁre if batteries are mistreated. Replace only with the same or speciﬁed type.

• Do not leave the batteries exposed to direct sunlight for a long period of time with doors and windows closed.

Do not disassemble the batteries or dispose of it in ﬁre.

WARNING: To reduce the risk of ﬁre or electric shock, do not expose this apparatus to rain or moisture.

Explanation of WARNING symbols:

The lighting ﬂash with arrowhead symbol within an equilateral triangle is intended to alert the user to

the presence of not isolated dangerous voltage within the product that may be sufﬁcient magnitude to

constitute a risk of shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of

important operating and servicing instructions in the literature accompanying the appliance.

Your Unit is designed and manufactured to operate within deﬁned design limits, and misuse may result in electric

shock or ﬁre. To prevent your Unit from being damaged, the following rules should be observed for its installation, use,

and maintenance. Please read the following safety instructions before operating your Unit. Keep these instructions

in a safe place for future reference.

• Read these instructions.

• Keep these instructions.

• Heed all warnings.

• Follow all instructions.

• Do not use this apparatus near water.

• Clean only with a dry cloth.

• Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including

ampliﬁers) that produce heat.

• Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with

one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or

the third prong are provided for your safety. If the provided plug does not ﬁt into your outlet, consult an electrician

for replacement of the obsolete outlet.

• Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and

the point where they exit from the apparatus.

• Only use attachments/accessories speciﬁed by the manufacturer.

• Use only with the cart, stand, tripod, bracket, or table speciﬁed by the manufacturer, or

sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus

combination to avoid injury from tip-over.

• Unplug this apparatus during lightning storms or when unused for long periods of time.

• Refer all servicing to qualiﬁed service personnel. Servicing is required when the apparatus has been damaged

in any way, such as when the power supply cord or plug is damaged, liquid has been spilled or objects have

fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has

been dropped.

• To reduce the risk of electric shock or component damage, switch off the power before connecting other

components to your Unit.

• Unplug the power cord before cleaning your Unit. A damp cloth is sufﬁcient for cleaning. Do not use a liquid or a

spray cleaner on your Unit. Do not use abrasive cleaners.

• Always use the accessories recommended by the manufacturer to insure compatibility.

• When moving your Unit from an area of low temperature to an area of high temperature, condensation may

form in the housing. Wait before turning on your Unit to avoid causing ﬁre, electric shock, or component damage.

• Slots and openings in the back and bottom of the cabinet are provided for ventilation. To ensure reliable

operation of your Unit and to protect it from overheating, be sure these openings are not blocked or covered. Do

not place your Unit in a bookcase or cabinet unless proper ventilation is provided.

• Never push any object into the slots and openings on your Unit enclosure. Do not place any objects on the

top of your Unit. Doing so could short circuit parts causing a ﬁre or electric shock. Never spill liquids on your Unit.

• When connected to a power outlet, power is always ﬂowing into your Unit. To totally disconnect power, unplug

the power cord.

IMPORTANT SAFETY INSTRUCTIONS

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

PACKAGE CONTENTS

This Quick

Start Guide

Remote Control

with Batteries

High Deﬁnition Sound Bar

Digital Optical

Cable

Stereo RCA to 3.5mm

Audio Cable

Coaxial Audio

Cable

Power Cable

2 x Sound Bar Wall

Mount Brackets

Wall Mount

Template

2 x Wall

Mount Screws

(Size: M4 x 10)

CONTROLS & CONNECTIONS

Back of Sound Bar

Power Port

SUB OUT

Subwoofer Out

OPTICAL (4)

Digital Optical Audio In

DIGITAL (3)

Coaxial In

AUX (1)

Analog Audio In

AUX (2)

Analog Audio In

Service Port

Control Buttons are located here:

Back of Sound Bar

Input

Power

Volume

+

-

Bluetooth Input

(Hold to force pair, See ‘Bluetooth Pairing’ for more information.)

FIRST-TIME SETUP

*Not all TVs have the audio outputs shown above. To connect the Sound Bar directly

to your other devices (Blu-ray player, game system, etc) see your device’s user manual.

1

AND CONNECT IT TO YOUR TV

CHOOSE ONE CABLE:

BETTER

GOOD

GOOD GOOD

BETTERBETTER

3.5MM TO

RCA CABLE

3.5MM TO

RCA CABLE

DIGITAL COAXIAL

CABLE**

DIGITAL OPTICAL

CABLE**

**When using either of the Digital Inputs, if there is no audio: (A) try setting the TV

output to PCM or (B) Connect directly to your Blu-ray/other source, some TVs do not

pass through digital audio.

Back of Sound Bar

3

Connect the Power Cable to

the Sound Bar.

Plug the Power Cable into

a power outlet.

2

For the best surround sound experience, position the Sound Bar as shown.

The Sound Bar should be close to ear level.

Sound Bar is centered

below the TV.

4

9

Remove the battery cover

by gently sliding it away

from the remote.

10

Insert the included batteries

and gently slide the battery

cover back into place.

11

Turn your TV on, then press the Power button

on the remote to turn the Sound Bar on.

Press the Input button to switch between

audio sources. For example, if you

connected your TV to Input 1, set the Sound

Bar to Input 1.

Hardware setup is complete.

Power

Input

Top Top

Volume +

Press to increase volume.

Volume –

Press to decrease volume.

USING THE REMOTE

(Changes Treble and Bass levels)

Power

Press to turn on or off.

Mute

Press to mute/unmute.

Input

Press to change input source.

Enter/Play/Pause

Press to select an option.

Press to play or pause.

(Changes Treble and Bass levels)

Treble

Press to enter treble adjustment mode.

Bass

Press to enter bass adjustment mode.

TruVolume

Press to enable/disable TruVolume.

TruSurround HD

Press to enable/disable TruSurround HD.

Bluetooth

Press to enter Bluetooth input.

(To enter force pair mode, press and hold for 5 seconds)

LED Indicators are located here:

The LED Indicators will behave differently with each button on the remote control.

Function LED Behavior Description

Input

Press the INPUT button on the remote to cycle through each available input:

• Analog Audio In - AUX (1)

• Analog Audio In - AUX (2)

• Coaxial In- Digital (3)

• Digital Optical Audio In - Optical (4)

• Bluetooth

Bluetooth Pairing

(When searching for device)

Flash from Left to Right

and back continuously.

Press and hold the button on the remote. The Sound Bar will be discoverable for 15

minutes. You can now search for the Sound Bar (VIZIO S3820w) using your Bluetooth Device.

The sound bar will power down if no device is found.

Note: Set your Bluetooth device into pairing mode prior to the Sound Bar.

DTS TruVolume

On/Off

TruVolume On:

TruVolume Off:

Press the TVOL button to enable/disable TruVolume. When enabled (On), TruVolume

provides a consistent and comfortable volume level for a more enjoyable listening

experience.

DTS TruSurround

On/Off

TruSurround On:

TruSurround Off:

Press the TSHD button to enable/disable DTS TruSurround. When enabled (On), all inputs will

produce virtual surround sound. When disabled (Off), all sources will playback in stereo.

Treble Levels

Two center LEDs indicate

Treble level 0.

Press the TREBLE button then press the Next/Previous button to increase/decrease the

treble level. The LED indicators will move to the right with increasing levels and to the left with

decreasing levels.

Bass Levels

Two center LEDs indicate

Bass level 0.

Press the BASS button then press the Next/Previous button to increase/decrease the bass

level. The LED indicators will move to the right with increasing levels and to the left with

decreasing levels.

Analog Audio In - AUX (1)

Analog Audio In - AUX (2)

Coaxial In - Digital (3)

Digital Optical Audio In -

Optical (4)

Bluetooth

LED INDICATORS

BLUETOOTH PAIRING

Back of Sound Bar

To pair the Sound Bar with a Bluetooth device:

1. Press and hold the Bluetooth button on the Sound Bar or the Bluetooth button on the remote for ﬁve (5) seconds.

When the Sound Bar is in Bluetooth Pairing Mode, the LED Indicators on the Display Panel on the front of the Sound Bar

will light sequentially from left to right and back again.

Once the device is paired, the LED Indicators will stop ﬂashing.

2. You can now search for the Sound Bar (VIZIO S3820w) using your Bluetooth device. For more information, see the

documentation that came with your device.

3. Play audio from your Bluetooth device. Volume can be controlled on your source device and

the Sound Bar.

USING BLUETOOTH MODE

Your Sound Bar supports music streaming from smartphones, tablets, and computers with Bluetooth capability.

Device compatibility will vary, see your device’s documentation for more information. Once you have paired your

source device to the Sound Bar, as long as you stay within range of the Sound Bar, your device should remain

paired, even if you change the input on the Sound Bar.

Maximizing Signal

A Bluetooth signal has a range of up to 30 feet. Keep in mind that Bluetooth is a compressed audio format, so

streamed music may lose some integrity when compared to a wired connection.

Try the following if your sound quality is less than optimal:

• If you hear any break-up or disconnect while streaming music from your device, move the source device

closer to the Sound Bar.

• Be sure that there are no solid obstructions in the line-of-sight between the Sound Bar and the source

device.

• Other wireless devices can affect Bluetooth range, including wireless security cameras, wireless video

baby monitors, cordless phones, and microwave ovens. Turning off or moving these devices may improve

Bluetooth range.

Your Sound Bar is not equipped with a microphone, so it cannot operate as a hands-free

device for a smartphone.

Reduce the volume levels on your device and on the Sound Bar before pressing Play. High volume

levels can damage your hearing.

ADVANCED SETUP

DIGITAL OPTICAL

CABLE

Connect up to four (4) different devices

to the Sound Bar (devices shown are

examples you can use any device).

To listen to a device, change the input

source on the Sound Bar.

Optical, Coaxial, and 3.5mm cables

transmit audio only. If connecting a

video device, you will need a separate

video connection from the device to

your TV.

Game Console Network Media Player Tablet/MP3 Player/Laptop

3.5mm AUDIO

CABLE

DIGITAL COAXIAL

CABLE

RCA AUDIO

CABLE

Back of Sound Bar

CONNECTING A SUBWOOFER

Back of Sound Bar

For best results setting up an optional subwoofer, VIZIO suggests

the following procedure:

1. Press the BASS button on the remote control to enter bass

adjustment mode.

2. Use the Previous/Next buttons to adjust the bass level to

the center position.

3. Power Off the Sound Bar and Subwoofer. Connect an

RCA cable from the Sound Bar to the Subwoofer.

4. Power On the Sound Bar and Subwoofer.

5. Manually adjust the SUB gain (Volume) and phase to

your preference. See your subwoofer’s user manual for

more information.

6. Use the BASS button on the remote control to adjust the

subwoofer’s output.

Optional Subwoofer*

RCA Subwoofer Cable*

*RCA subwoofer cable and subwoofer not included.

WALL MOUNTING THE SOUND BAR

Back of Sound Bar

Wall-Mount

Screw Holes

Insert and tighten two Wall-Mount Screws with a Phillips-head

screwdriver into the Wall-Mount Screw Holes.

1

2

Place the included wall mounting template against the wall

under your TV. Mark the four bracket holes using a pencil.

Be sure your screws are attached

to wood studs or drywall anchors

(for drywall) or concrete anchors

(for brick/concrete walls). Wall

mounting hardware is not included.

If you are unfamiliar with power tools or the layout of

electrical wiring in the walls of your home, consult a

professional installer.

22.5 in

(571.5 mm)

Wall Mount Screw

Screw Size: M4 x 10

3

There is no power.

• Press the POWER button on the remote control or on the top of your Sound Bar.

• Ensure the power cord is securely connected.

• Plug a different device into the electrical outlet to verify that the outlet is working correctly.

There is no sound.

• Increase the volume. Press Volume Up on the remote control or on the top of your Sound Bar.

• Press MUTE on the remote to ensure the Sound Bar is not muted.

• Press INPUT on the remote or on the top of your Sound Bar to select a different input source.

• When using either of the Digital Inputs, if there is no audio: (A) Try setting the TV output to PCM or (B) Connect directly to

your Blu-ray/other source, some TVs do not pass through digital audio.

• On digital inputs, the input LEDs will ﬂash rapidly if an unsupported format is present. Set the source to output PCM.

• Your TV may be set to variable audio output. Conﬁrm that the audio output setting is set to FIXED or STANDARD, not

VARIABLE. Consult your TV’s user manual for more detailed information.

• If using Bluetooth, ensure that the volume on your source device is turned up and that the device is not muted.

I hear buzzing or

humming.

• Ensure all cables and wires are securely connected.

• Connect a different source device (TV, Blu-ray player, etc) to see if the buzzing persists. If it does not, the problem may

be with the original device.

• Connect your device to a different input on the Sound Bar.

The remote

isn’t working.

• Replace the remote batteries with new ones.

• Point the remote directly at the center of the Sound Bar when pressing a button.

• If using a Bluetooth connection, some of the buttons on the remote may not be supported by the streaming

application. (e.g., Pandora doesn’t support the Back button.)

HELP & TROUBLESHOOTING

DO YOU HAVE QUESTIONS?

LET US HELP!

YOUR PRODUCT INCLUDES FREE LIFETIME TECH SUPPORT

Phone:

Email:

Web:

(877) 878-4946 (TOLL-FREE)

techsupport@VIZIO.com

http://store.VIZIO.com/support

Hours of operation:

Monday - Friday: 5

am

TO

9

pm

(pST)

Saturday - Sunday: 8

am

TO

4

pm

(pST)

The VIZIO support team is highly

trained and is based in the

United States.

We can help with:

• New Product Setup

• Connecting Your Devices

• Technical Problems

• And More

We speak English • Se habla Español • Nous parlons Français

Available at www.VIZIO.com

This Product Sold Separately

Introducing the new E-series slim frame design. The VIZIO E-series LED TV is shattering the mold in a

way only VIZIO can, with high-quality design and picture at the best value. With a stunningly slim outer

frame design – and LED with 1080p Full HD for rich colors and vivid details, this HDTV gives you the best

picture at the best value.

VIZIO RECOMMENDS

La page charge ...

Vizio S3820w-C0NA Guide de démarrage rapide

Vizio S3820w-C0NA Guide de démarrage rapide

dans d''autres langues

Documents connexes

Autres documents