Emac NEN1338 spécification

Taper
spécification
R03.001_19/05/2010
TECHNICAL FILE
Novoencimera
Novoencimera is a prole made of aluminum to nish up
benches, shelves and steps tiled with ceramic tiles. This prole
decorates and protects. It is available in matt silver nish and
has four complementary pieces available to get a perfect
nish: cover, interior and exterior angle.
General features
Material: Aluminum
Length: 2.5 l.m. (8ft2in)
Dimensions: h: 8, 10, 12 mm. (5/16, 3/8, 1/2”)
a: 48 mm. (1-14/16”)
Packaging: 10 u./box
Finish: 13- Anod. matt silver
Complementary pieces
Page 1 of 2
Internal angle
External angle
Cover
Cover
Technical features
Alloy 6063 (L-3441/38-337)
Fire resistance M0 (UNE 23-727-90)
Abrasion resistance Very good
Lightfastness:
Excelente
Appearance and color: EN 12373-1
Novoviencimera has angle and joint pieces available to place several consecutive proles. These pieces
guarantee the perfect performance of the prole and its perfect nish.
TECHNICAL FILE
R03.001_19/05/2010
Technical Information
The data provided are only for information and have been obtained by our supplier or Emac®.
Does not constitute legal guarantee in terms of properties and / or functionality of the application of material
Emac Complementos S.L. (Spain) info@emac.es // Emac America L.L.C. (FL,USA) [email protected]// Emac Italia S.R.L. (Italy) [email protected]
www.emac.es
You can nd out more information about the technical features of Emac®’s products by downloading
their Technical File from www.emac.es
If you have any query, please contact our Technical Department in [email protected]
Novoencimera
Page 2 of 2
Materials
Aluminum
Novoencimera is a prole made by extrusion of aluminum. The anodizing process improves the
corrosion resistance, mechanical resistance and appearance of proles. It has the quality seal Qualanod,
which guarantees the quality of the process and the resulting proles. This seal regulates several tests:
appearance and color, thickness measurements, sealing and impregnation control, abrasion resistance,
lightfastness, acetic saline chamber and nitric acid immersion.
Aluminum has excellent chemical, physical and mechanical properties. It is lightweight, tough, ductile,
malleable and highly durable
Zamak
The complementary piece of Novoencimera is made of Zamak. Zamak is a non ferrous alloy of Zinc
with aluminium, magnesium and copper (UNE EN 1774). It is tough, has high hardness, high mechanical
strength and excellent plastic deformability.
*You can nd out more information by consulting the Technical les of materials in www.emac.es
1. Spread a big amount of mortar on the surface to be tiled.
2. Place the prole and align it with the edge or separately at the desired distance. Then press to
make the mortar pass through the holes on the anchoring wing.
3. Place the tile on the anchoring wing and align it with the front part. Press to ensure an optimal
adhesion.
4. Finally, clean immediatly the leftover material and let dry.
Installation
Cleaning and maintenance
The product must be cleaned periodically with a soft cloth. If you use a neutral liquid cleaner, you must
rinse the prole with cold water and dry it to remove the humidity excess. The persistent dirtiness can
be removed by using cleaning approved agents lightly abrasive or a grid covered with polished powder
neutral.
Steel wool, abrasive cleaners, souring products as well as strong acids (hydrochloric and
perchloric),strong bases (caustic soda or ammonia) or carbonated solutions are not recommended.
Citric acid is neither recommended because disolves the protective layer of the surface of aluminium.
Waxes, petrolatum, lanolin or similar substances are not appropriate. Solvents containing haloalkanes
(hydrouoroether and chlorinated solvents) and curing accelerators containing chlorides should not be
used (use special accelerators free of chlorides).
IndoorsOutdoors Flooring Recyclable
  • Page 1 1
  • Page 2 2

Emac NEN1338 spécification

Taper
spécification

dans d''autres langues