Samsung WF340ANG/XAC Manuel utilisateur

Washing Machine

user manual

imagine the possibilities

Thank you for purchasing this Samsung product.

To receive more complete service, please register

your product at

www.samsung.com/register

WF350AN*

WF340AN*

WF330AN*

This manual is made with 100% recycled paper.

WF350AN-02833B-07_EN_20120712.indd 1WF350AN-02833B-07_EN_20120712.indd 1 2012-07-13  10:36:302012-07-13  10:36:30

2_ features of your new VRT™ washer

features of your new VRT™

washer

1. VRT™ (Vibration Reduction Technology)

This Samsung washer performs smoothly at top spin speeds, minimizing noise and

vibration.

2. Super capacity

Samsung’s extra-large capacity laundry machine can wash a full set of your bedding, a king-

size comforter, or up to 26 bath towels in a single load. Since you don’t have to do as many

loads, you save time, money, water and energy.

3. Deep steam(WF350*)

The deep steam feature boosts cleaning performance and loosens grime and dirt, thus

providing superior cleaning results.

4. Diamond drum™

Take gentle care of your fabrics. With inside holes 36% smaller than those of conventional

drums, the diamond drum prevents fabrics from sticking out and consequently being

damaged.

5. Woolmark Certiﬁ ed

The machine wash wool cycle on the Samsung machines has been tested and passed the

required Woolmark Company speciﬁ cation for machine washable wool products. Fabrics

should be washed according to the instructions on the garment label as speciﬁ ed by

Woolmark and Samsung.

6. Digital display & Center jog dial

The jog dial enables you to select cycles in both directions with ease, and the display is easy

to use and understand.

7. DD(Direct-drive) Motor

The power to handle anything! Our direct-drive inverter motor delivers power right to the

washer drum from a variable speed, reversible motor. A beltless direct-drive motor generates

a higher spin speed of 1200 rpm for more effective, quiet operation. The washer also has

fewer moving parts, meaning fewer repairs.

8. Sanitize

When selecting this cycle, the water heats to an extra high temperature to remove 99.9%

of certain bacteria typically found on clothing, bedding, or towels. This certiﬁ cation is

conducted by NSF International, an independent third-party testing and certiﬁ cation

organization.

Please check garment care label to avoid garment damage. Only Sanitize cycles have been

designed to meet the requirements of this protocol for sanitization efﬁ cacy.

9. Pure Cycle

TM

Using pure cycle helps to keep your washing machine clean even without any chemical

detergent or bleach. Keep your drum cleansed and odorless with this specialized cleaning

program.

NSF Protocol P172

Sanitization Performance of Residential and

Commercial, Family-Sized Clothes Washers

WF350AN-02833B-07_EN_20120712.indd Sec1:2WF350AN-02833B-07_EN_20120712.indd Sec1:2 2012-07-13  10:36:372012-07-13  10:36:37

features of your new VRT™ washer _3

10. Child Lock

The Child Lock function ensures that curious little hands are kept out of your washing

machine.

This safety feature stops your children from playing with the operation of the washing

machine, and alerts you when it is activated.

11. Pedestal with storage drawer (Model No: WE357*)

An optional 15in.(38.1cm) pedestal is available to raise the washer for easier loading and

unloading.

It also offers a built-in storage drawer that can hold a 100oz.(6.25 lb) bottle of detergent.

12. Stacking (Model No: SK-3A1/XAC, SK-4A/XAC, SK-5A/XAC)

Samsung’s washers and dryers can be stacked to maximize usable space. An optional

stacking kit is available for purchase from your Samsung retailer.

WF350AN-02833B-07_EN_20120712.indd Sec1:3WF350AN-02833B-07_EN_20120712.indd Sec1:3 2012-07-13  10:36:372012-07-13  10:36:37

4_ safety information

safety information

Congratulations on your new Samsung washer. This manual contains important

information on the installation, use and care of your appliance. Please take time to

read this manual to take full advantage of your washer’s many beneﬁ ts and features.

WHAT YOU NEED TO KNOW ABOUT SAFETY INSTRUCTIONS

Warnings and Important Safety Instructions in this manual do not cover all possible conditions and

situations that may occur. It is your responsibility to use common sense, caution, and care when installing,

maintaining, and operating your washer.

IMPORTANT SAFETY SYMBOLS AND PRECAUTIONS

What the icons and signs in this user manual mean:

WARNING

Hazards or unsafe practices that may result in severe personal injury

or death.

To reduce the risk of ﬁ re, explosion, electric shock, or personal injury

when using your washer, follow these basic safety precautions:

CAUTION

Hazards or unsafe practices that may result in minor personal injury or

property damage.

Do NOT attempt.

Do NOT disassemble.

Do NOT touch.

Follow directions explicitly.

Unplug the power plug from the wall socket.

Make sure the machine is grounded to prevent electric shock.

Call the service center for help.

Note

These warning signs are here to prevent injury to you and others.

Please follow them explicitly.

After reading this section, keep it in a safe place for future reference.

Read all instructions before using the appliance.

SAVE THESE INSTRUCTIONS

WF350AN-02833B-07_EN_20120712.indd Sec2:4WF350AN-02833B-07_EN_20120712.indd Sec2:4 2012-07-13  10:36:372012-07-13  10:36:37

safety information _5

WARNING: To reduce the risk of ﬁ re, electric shock, or injury to persons when using your

appliance, follow basic precautions, including the following:

1. Read all instructions before using the appliance.

2. Do not wash or dry articles that have been previously cleaned in, washed in, soaked

in, or spotted with gasoline, dry-cleaning solvents, other ﬂ ammable or explosive

substances as they give off vapors that could ignite or explode.

3. Do not allow children to play on or in the appliance. Close supervision of children is

necessary when the appliance is used near children.

4. Before the appliance is removed from service or discarded, remove the door to the

washing or drying compartment.

5. Do not reach into the appliance if the drum is moving.

6. Do not install or store this appliance where it will be exposed to the weather.

7. Do not tamper with controls.

8. Do not repair or replace any part of the appliance or attempt any servicing unless

speciﬁ cally recommended in the user-maintenance instructions or in published user-

repair instructions that you understand and have the skills to carry out.

9. Do not add gasoline, dry-cleaning solvents, or other ﬂ ammable or explosive substances

to the wash water. These substances give off vapors that could ignite or explode.

10. Under certain conditions, hydrogen gas may be produced in a hot water system

that has not been used for 2 weeks or more. HYDROGEN GAS IS EXPLOSIVE. If

the hot water system has not been used for such a period, before using a washer or

combination washer-dryer, turn on all hot water faucets and let the water ﬂ ow from

each for several minutes. This will release any accumulated hydrogen gas. As the gas is

ﬂ ammable, do not smoke or use an open ﬂ ame during this time.

State of California Proposition 65 Warnings:

The California Safe Drinking Water and Toxic Enforcement Act requires the Governor of

California to publish a list of substances known to the State of California to cause cancer,

birth defects, or other reproductive harm, and requires businesses to warn of potential

exposure to such substances.

This product contains a chemical known to the State of California to cause cancer, birth

defects, or other reproductive harm. This appliance can cause low-level exposure to some

of the substances listed, including benzene, formaldehyde, and carbon monoxide.

SAVE THESE INSTRUCTIONS

WARNING

WF350AN-02833B-07_EN_20120712.indd Sec2:5WF350AN-02833B-07_EN_20120712.indd Sec2:5 2012-07-13  10:36:382012-07-13  10:36:38

6_ safety information

SEVERE WARNING SIGNS FOR INSTALLATION

Plug the power cord into an AC 120V/60Hz/15A wall socket or higher and use the socket for this appliance

only. In addition, do not use an extension cord.

- Sharing a wall socket with other appliances using a power strip or extending the power cord may result

in electric shock or ﬁ re.

- Do not use an electric transformer. It may result in electric shock or ﬁ re.

- Ensure that the power voltage, frequency and current are the same as those of the product

speciﬁ cations. Failing to do so may result in electric shock or ﬁ re.

The installation of this appliance must be performed by a qualiﬁ ed technician or service company.

- Failing to do so may result in electric shock, ﬁ re, an explosion, problems with the product, or injury.

Remove all foreign substances such as dust or water from the power plug terminals and contact points

using a dry cloth on a regular basis.

- Unplug the power plug and clean it with a dry cloth.

- Failing to do so may result in electric shock or ﬁ re.

Plug the power plug into the wall socket in the right direction so that the cord runs towards the ﬂ oor.

- If you plug the power plug into the socket in the opposite direction, the electric wires within the cable

may be damaged and this may result in electric shock or ﬁ re.

This appliance must be properly grounded.

Do not ground the appliance to a gas pipe, plastic water pipe, or telephone line.

- This may result in electric shock, ﬁ re, an explosion, or problems with the product

- Never plug the power cord into a socket that is not grounded correctly and make sure that it is in

accordance with local and national codes.

Do not install this appliance near a heater, inﬂ ammable material.

Do not install this appliance in a humid, oily or dusty location, in a location exposed to direct sunlight and

water (rain drops).

Do not install this appliance in a location where gas may leak.

- This may result in electric shock or ﬁ re.

Plug the power plug into the wall socket ﬁ rmly. Do not use a damaged power plug, damaged power cord or

loose wall socket.

- This may result in electric shock or ﬁ re.

Do not pull or excessively bend the power cord.

Do not twist or tie the power cord.

Do not hook the power cord over a metal object, place a heavy object on the power cord, insert the power

cord between objects, or push the power cord into the space behind the appliance.

- This may result in electric shock or ﬁ re.

Do not pull the power cord, when unplugging the power plug.

- Unplug the power plug by holding the plug.

- Failing to do so may result in electric shock or ﬁ re.

When the power plug or power cord is damaged, contact your nearest service center.

CAUTION SIGNS FOR INSTALLATION

This appliance should be positioned in such a way that it is accessible to the power plug.

- Failing to do so may result in electric shock or ﬁ re due to electric leakage.

Install your appliance on a level and hard ﬂ oor that can support its weight.

- Failing to do so may result in abnormal vibrations, noise, or problems with the product.

Unplug the power plug when the appliance is not being used for long periods of time or during a thunder/

lightning storm.

- Failing to do so may result in electric shock or ﬁ re.

safety information

SAVE THESE INSTRUCTIONS

WARNING

CAUTION

WF350AN-02833B-07_EN_20120712.indd Sec2:6WF350AN-02833B-07_EN_20120712.indd Sec2:6 2012-07-13  10:36:382012-07-13  10:36:38

safety information _7

SEVERE WARNING SIGNS FOR USING

If the appliance is ﬂ ooded, cut the power immediately and contact your nearest service center.

If the appliance generates a strange noise, a burning smell or smoke, unplug the power plug immediately

and contact your nearest service center.

- Failing to do so may result in electric shock or ﬁ re.

In the event of a gas leak (such as propane gas, LP gas, etc.), ventilate immediately without touching the

power plug. Do not touch the appliance or power cord.

- Do not use a ventilating fan.

- A spark may result in an explosion or ﬁ re.

Do not wash items contaminated with gasoline, kerosene, benzene, paint thinner, alcohol or other

ﬂ ammable or explosive substances.

- This may result in electric shock, ﬁ re or an explosion.

Do not open the washer door by force while it is operating (high-temperature washing/drying/spinning).

- Water ﬂ owing out of the washer may result in burns or cause the ﬂ oor to be slippery.

This may result in injury.

- Opening the door by force may result in damage to the product or injury.

Make sure to remove the packaging (sponge, styrofoam) attached to the bottom of the washer before using

it.

Do not insert your hand under the washer.

- This may result in injury.

Do not touch the power plug with wet hands.

- This may result in electric shock.

Do not turn the appliance off by unplugging the power plug while an operation is in progress.

- Plugging the power plug into the wall socket again may cause a spark and result in electric shock or ﬁ re.

Keep all packaging materials well out of the reach of children, as packaging materials can be dangerous to

children.

- If a child places a bag over its head, it may result in suffocation.

Do not let children or inﬁ rm persons use this washer unsupervised.

- Failing to do so may result in electric shock, burns or injury.

Do not insert your hand or a metal object under the washer while it is operating.

- This may result in injury.

Make sure the detergent drawer is closed before you put laundry into the washer or remove laundry from

the washer.

- If the detergent drawer is open, you could strike the drawer with your head and injure yourself.

Do not attempt to repair, disassemble, or modify the appliance yourself.

- Do not use any fuse(such as cooper, steel wire, etc.) other than the standard fuse.

- When repairing or reinstalling the appliance is required, contact your nearest service center.

- Failing to do so may result in electric shock, ﬁ re, problems with the product, or injury.

If any foreign substance such as water has entered the appliance, unplug the power plug and contact your

nearest service center.

- Failing to do so may result in electric shock or ﬁ re.

When the water supply hose comes loose from the faucet and ﬂ oods the appliance, unplug the power plug.

- Failing to do so may result in electric shock or ﬁ re.

SAVE THESE INSTRUCTIONS

WARNING

WF350AN-02833B-07_EN_20120712.indd Sec2:7WF350AN-02833B-07_EN_20120712.indd Sec2:7 2012-07-13  10:36:382012-07-13  10:36:38

8_ safety information

safety information

CAUTION SIGNS FOR USING

When the washer is contaminated by a foreign substance such as detergent, dirt, food waste, etc., unplug the

power plug and clean the washer using a damp and soft cloth.

- Failing to do so may result in discoloration, deformation, damage or rust.

The front glass may be broken by a strong impact. Take care when using the washer.

- When the glass is broken, it may result in injury.

After a water supply failure or when reconnecting the water supply hose, open the faucet slowly. Open the faucet

slowly after a long period of non-use.

- The air pressure in the water supply hose or the water pipe may result in damage to a part or in water

leakage.

If a drain error occurs during an operation, check if there is a draining problem.

- If the washer is used when it is ﬂ ooded because of a draining problem, it may result in electric shock or ﬁ re

due to electric leakage.

Insert the laundry into the washer completely so that laundry does not get caught in the door.

- If laundry gets caught in the door, it may result in damage to the laundry or the washer, or result in water

leakage.

Ensure that the faucet is turned off when the washer is not being used.

- Ensure that the screw on the water supply hose connector is properly tightened.

- Failing to do so may result in property damage or injury.

Take care that the Rubber Seal and the Front Door Glass are not contaminated by a foreign substance (e.g.

waste, thread, hair, etc.)

- If a foreign substance is caught in the door or the door is not completely closed, it may cause a water

leakage.

Open the faucet and check if the water supply hose connector is ﬁ rmly tightened and that there is no water

leaking before using the product.

- If the screws or the water supply hose connector are loose, it may result in water leakage.

The product you have purchased is designed for domestic use only.

The use for business purposes qualiﬁ es as product misuse. In this case, the product will not be covered by the

standard warranty provided by Samsung and no responsibility can be attributed to Samsung for malfunctions or

damages resulting from such misuse.

If the wash is not started and the laundry is left for a period of time after you have added detergent or applied

stain remover or pre-treatment onto the laundry, the laundry may be discolored.

Select the recommended cycle and temperature on the basis of the laundry items, sort the laundry by color on

the basis of its colorfastness and select the appropriate cycle.

Make sure that foreign objects such as pins, buttons and coins are removed from clothing items when adding

laundry to the washer. Wash dirty laundry separately from relatively clean items and wash fragile items separately

from tougher textiles.

If an item is stained, wash it as soon as possible. Use stain remover or detergent only after testing the

colorfastness of the item by applying a small quantity to an inside seam.

Do not stand on top of the appliance or place objects (such as laundry, lighted candles, lighted cigarettes,

dishes, chemicals, metal objects, etc.) on the appliance.

- This may result in electric shock, ﬁ re, problems with the product, or injury.

Do not operate the appliance with wet hands.

- This may result in electric shock.

Do not spray volatile material such as insecticide onto the surface of the appliance.

- As well as being harmful to humans, it may also result in electric shock, ﬁ re or problems with the product.

Do not place an object that generates a electromagnetic ﬁ eld near the washer.

- This may result in injury due to a malfunction.

SAVE THESE INSTRUCTIONS

CAUTION

WF350AN-02833B-07_EN_20120712.indd Sec2:8WF350AN-02833B-07_EN_20120712.indd Sec2:8 2012-07-13  10:36:382012-07-13  10:36:38

safety information _9

Since the water drained during a high-temperature wash or drying cycle is hot, do not touch the water.

- This may result in burns or injury.

Do not wash, spin or dry water-proof seats, mats or clothing (*).

- Do not wash thick, hard mats even if the washer mark is on the care label.

- This may result in injury or damage to the washer, walls, ﬂ oor or clothing due to abnormal vibrations.

* Woolen bedding, rain covers, ﬁ shing vests, ski pants, sleeping bags, diaper covers, sweat suits, and bicycle,

motor cycle, car covers, etc.

Do not operate the washer when the detergent box is removed.

- This may result in electric shock or injury due to water leakage.

Do not touch the inside of the tub during or just after drying as it is hot.

- This may result in burns.

Do not insert your hand into the detergent box after opening it.

- This may result in injury as your hand may be caught by the detergent input device.

Do not place any objects (such as shoes, food waste, animals) other than laundry into the washer.

- This may result in damage to the washer, or injury and death in the case of pets due to the abnormal

vibrations.

Do not press the buttons using sharp objects such as pins, knifes, ﬁ ngernails, etc.

- This may result in electric shock or injury.

Do not wash laundry contaminated by oils, creams or lotions usually found in skincare shops or massage clinics.

- This may result in the rubber seal becoming deformed and water leakage.

Do not leave metal objects such as a safety pin or hair pin, or bleach in the tub for long periods of time.

- This may cause the tub to rust.

- If rust starts appearing on the surface of the tub, apply a cleansing agent (neutral) to the surface and use a

sponge to clean it. Never use a metal brush.

Do not use dry cleaning detergent directly and do not wash, rinse, or spin laundry contaminated by dry cleaning

detergent.

- This may result in spontaneous combustion or ignition due to the heat of the oxidation of the oil.

Do not use hot water from water cooling/heating devices.

- This may result in problems with the washer.

Do not use natural hand-washing soap for the washer.

- If it hardens and accumulates inside the washer, it may result in problems with the product, discoloration, rust

or bad odors.

Do not wash large laundry items such as bedding in the washing net.

- Place socks and brassieres into the washing net and wash them with the other laundry.

- Failing to do so may result in injury due to abnormal vibrations.

Do not use hardened detergent.

- If it accumulates inside the washer, it may result in water leakage.

Do not wash throw rug or doormat.

- If you wash throw rug or doormat, the sand will accumulate inside the washer. It may result in error such as

not draining.

SEVERE WARNING SIGNS FOR CLEANING

Do not clean the appliance by spraying water directly onto it.

Do not use benzene, thinner or alcohol to clean the appliance.

- This may result in discoloration, deformation, damage, electric shock or ﬁ re.

Before cleaning or performing maintenance, unplug the appliance from the wall socket.

- Failing to do so may result in electric shock or ﬁ re.

SAVE THESE INSTRUCTIONS

WARNING

WF350AN-02833B-07_EN_20120712.indd Sec2:9WF350AN-02833B-07_EN_20120712.indd Sec2:9 2012-07-13  10:36:382012-07-13  10:36:38

10_ contents

contents

SETTING UP YOUR WASHER

11

11 Checking the parts

12 Meeting installation requirements

12 Electrical supply

12 Grounding

12 Water

13 Drain facility

13 Flooring

13 Location consideration

13 Alcove or closet installation

13 Undercounter installation(washer only)

14 With optional pedestal base or stacking kit

15 Installing your washer

WASHING A LOAD OF LAUNDRY

17

17 Loading your washer

17 Getting started

18 Overview of the control panel

20 Child Lock

20 Garment+

21 Washing clothes using the cycle selector

22 Using steam wash

22 Detergent use

23 Features

CLEANING AND MAINTAINING YOUR

WASHER

25

25 Cleaning the exterior

25 Cleaning the interior

25 Cleaning the dispensers

26 Storing your washer

26 Cleaning the debris ﬁ lter

27 Cleaning the door seal

27 Preserving the top cover and the front frame

28 Pure Cycle

TM

TROUBLESHOOTING AND

INFORMATION CODES

29

29 Check these points if your washer…

31 Information codes

APPENDIX

33

33 Fabric care chart

34 Helping the environment

34 Declaration of conformity

34 Speciﬁ cation

35 Cycle chart

WARRANTY

36

36 Warranty

WF350AN-02833B-07_EN_20120712.indd Sec10:10WF350AN-02833B-07_EN_20120712.indd Sec10:10 2012-07-13  10:36:382012-07-13  10:36:38

setting up your washer _11

01 SETTING UP

setting up your washer

CHECKING THE PARTS

Unpack your washer and inspect it for shipping damage. Make sure you have received all of the items

shown below. If your washer was damaged during shipping, or you do not have all of the items, contact

1-800-SAMSUNG(726-7864).

To prevent personal injury or strain, wear protective gloves whenever lifting or carrying the unit.

Keep all packaging materials well out of the reach of children, as packaging materials can be

dangerous to children.

- If a child places a bag over its head, it may result in suffocation.

Parts supplied

Wrench Bolt hole covers Water supply hoses

Hose guide Plastic zip hose tie Manual book

Tools needed

Pliers Flat screwdriver

* Bolt hole covers : The number of bolt hole covers depends on the model (3~6 covers).

WARNING

Adjustable legs

Cold water supply hose

Hot water supply hose

Drain hose

Detergent drawer

Control panel

Door

Tub

Debris ﬁ lter

Drain tube

Filter cover

Power cord

WF350AN-02833B-07_EN_20120712.indd Sec3:11WF350AN-02833B-07_EN_20120712.indd Sec3:11 2012-07-13  10:36:392012-07-13  10:36:39

12_ setting up your washer

MEETING INSTALLATION REQUIREMENTS

Electrical supply

• 120 Volt 60 Hz 15 AMP fuse or circuit breaker

• An individual branch circuit serving only your washer is recommended.

• Your washer is equipped with a power cord.

Never use an extension cord.

Grounding

ELECTRICAL GROUNDING IS REQUIRED ON THIS APPLIANCE.

This appliance must be grounded. In the event of malfunction or breakdown, grounding will

reduce the risk of electric shock by providing a path of least resistance for electric current.

This appliance is equipped with a power cord having a three-prong grounding plug for use in a

properly installed and grounded outlet.

The plug must be plugged into an appropriate outlet that is properly installed and grounded in

accordance with all local codes and ordinances.

Improper connection of the equipment-grounding conductor can result in a risk of electrical

shock. Check with a qualiﬁ ed electrician or serviceman if you are in doubt as to whether the

appliance is properly grounded. Do not modify the plug provided with the appliance – if it

does not ﬁ t the outlet, have a proper outlet installed by a qualiﬁ ed electrician.

IMPORTANT SAFETY PRECAUTIONS

• To prevent unnecessary risk of ﬁ re, electrical shock or personal injury, all wiring and

grounding must be done in accordance with the National Electrical Code ANSI/FNPA, No.

70 Latest Revision and local codes and ordinances. It is the personal responsibility of the

appliance owner to provide adequate electrical service for this appliance.

Never connect ground wire to plastic plumbing lines, gas lines, or hot water pipes.

Water

To correctly ﬁ ll your washer in the proper amount of time, water pressure of 20-116psi(137-

800kPa) is required.

Water pressure less than 20 psi(137kPa) may cause water valve failure, or may not allow the

water valve to shut off completely. Or, it may extend the ﬁ ll time beyond what your washer

controls allow, resulting in your washer turning off. A time limit is built into the controls in the

event of an internal hose becoming loose and ﬂ ooding your home.

The water faucets must be within 4 ft.(122cm) of the back of your washer for the inlet hoses

provided with your washer.

Accessory inlet hoses are available in various lengths up to 10 ft.(305cm) for faucets that

are further away from the back of your washer.

To avoid the possibility of water damage:

• Have water faucets easily accessible.

• Turn off faucets when the washer is not in use.

• Periodically check that there is no leakage from the water inlet hose ﬁ ttings.

Check all connections at the water valve and faucet for leaks.

setting up your washer

WARNING

WF350AN-02833B-07_EN_20120712.indd Sec3:12WF350AN-02833B-07_EN_20120712.indd Sec3:12 2012-07-13  10:36:392012-07-13  10:36:39

setting up your washer _13

01 SETTING UP

Drain facility

The recommended height of the standpipe is 18 in (46 cm). The drain hose must be routed

through the drain hose clip to the standpipe. The standpipe must be large enough to accept the

outside diameter of the drain hose. The drain hose is attached at the factory.

Flooring

For best performance, your washer must be installed on a solidly constructed ﬂ oor. Wood ﬂ oor

may need to be reinforced to minimize vibration and/or unbalanced load situations. Carpeting

and soft tile surfaces are contributing factors in vibration and may cause your washer to move

slightly during the spin cycle.

Never install your washer on a platform or weakly supported structure.

Location consideration

Do not install your washer in areas where water may freeze, since your washer will always

maintain some water in its water valve, pump, and hose areas. This can cause damage to the

pump, hoses and other components.

Alcove or closet installation

MINIMUM CLEARANCES FOR CLOSET AND ALCOVE INSTALLATIONS:

Sides – 1 In.(2.5 cm)

Rear – 5.9 In.(15 cm)

Top – 17 In.(43.2 cm)

Closet Front – 2 In.(5.1 cm)

If the washer and dryer are installed together, the closet front must have at least 72 in²(465 cm²)

of an unobstructed air opening. Your washer alone does not require a speciﬁ c air opening.

A. Recessed area

B. Side view - closet or conﬁ ned area

Undercounter installation(washer only)

CAUTION

1 in.

(2.5 cm)

1 in.

(2.5 cm)

1 in.

(2.5 cm)

27 in.

(68.6 cm)

27 in.

(68.6 cm)

A

2 in.

(5 cm)

5.9 in.

(15 cm)

31.3 in.

(79.4 cm)

17 in.

(43.2 cm)

B

1 in.

(2.5 cm)

1 in.

(2.5 cm)

27 in.

(68.6 cm)

39.6 in.

(100.6 cm)

WF350AN-02833B-07_EN_20120712.indd Sec3:13WF350AN-02833B-07_EN_20120712.indd Sec3:13 2012-07-13  10:36:392012-07-13  10:36:39

14_ setting up your washer

setting up your washer

With optional pedestal base or stacking kit

Required Dimensions for Installation With Pedestal

Required Dimensions for Installation With Stacking Kit

* Required spacing

** External exhaust elbow requires additional space.

1 in.

(2.5 cm)

27 in.

(68.6 cm)

77.2 in.

(196.2cm)

6 in. *

(15.2 cm)

Closet or Door

48 in.² *

(310 cm²)

24 in.² *

(155 cm²)

3 in.

(7.6 cm)

3 in.

(7.6 cm)

1 in.

(2.5 cm)

31.3 in.

(79.4 cm)

5.9 in.**

(15 cm)

5 in.

(12.7 cm)

27 in.

(68.6 cm)

38.6 in.

(98.1 cm)

53.6 in.

(136.2 cm)

5.9 in.

(15 cm)

31.3 in.

(79.4 cm)

51.7 in. (131.4 cm) to clear open door

WF350AN-02833B-07_EN_20120712.indd Sec3:14WF350AN-02833B-07_EN_20120712.indd Sec3:14 2012-07-13  10:36:402012-07-13  10:36:40

setting up your washer _15

01 SETTING UP

INSTALLING YOUR WASHER

STEP 1

Selecting a location

Before you install the washer, make sure the location:

• Has a hard, level surface without carpeting or ﬂ ooring that may obstruct ventilation.

• Is away from direct sunlight.

• Has adequate ventilation.

• Will not be freezing (below 32 ˚F or 0 ˚C).

• Is away from heat sources such as oil or gas.

• Has enough space so that the washer doesn’t stand on its power cord.

STEP 2

Removing the shipping bolts

Before using your washer, you must remove all shipping

bolts from the back of the unit.

1. Loosen all the bolts with the supplied wrench.

2. Slide the bolt and spacer up and remove the bolt with

the spacer through the hole in the rear wall of your

washer. Repeat for each bolt.

3. Fill the holes with the supplied bolt hole covers.

4. Keep the shipping bolts and spacers for future use.

STEP 3

Installing your washer

1.

Place the drain hose in the drain facility.

Be sure an airtight connection is NOT

made between the drain hose and the

standpipe.

The standpipe must be at least 18in.(46

cm) high.

Caution must always be exercised to

avoid collapsing or damaging the drain

hose. For best results, the drain hose

should not be restricted in any way – by

elbows, couplings, or excessive lengths.

For situations where the drain hose

cannot be conveniently elevated to at

least 18in.(46 cm), the drain hose must

be supported.

2. Before connect the inlet hoses to water faucets, check to

ensure a washer is inside coupling.

96” Max

18” Min

96” Max

18” Min

Hose

retainer

Tie

strap

Laundry tub

Stand pipe

Hose

Guide

Rubber

Washer

Coupling

WF350AN-02833B-07_EN_20120712.indd Sec3:15WF350AN-02833B-07_EN_20120712.indd Sec3:15 2012-07-13  10:36:402012-07-13  10:36:40

16_ setting up your washer

3. Check the inlet hose to ensure a washer is inside each ﬁ ll hose.

Thread the inlet hoses to the HOT and COLD faucet

connections.

On the other end of the hose, check for one rubber washer per

hose and install each ﬁ ll hose to the water valve. Make sure the

hose with the Hot printed line is attached to the HOT faucet.

Tighten by hand until snug, then two-thirds of a turn with pliers.

For correct water use, connect both HOT and COLD water

valves. If either or both are not connected, an “nF” (no ﬁ ll) error

can occur.

4. Turn on the HOT and COLD water supply and check all

connections at the water valve and the faucet for leaks.

5. Plug the power cord into a 3-prong, well grounded 120

volt 60 Hz approved electrical outlet protected by a 15-

amp fuse or comparable circuit breaker.

Your washer is grounded through the third prong of the

power cord when plugged into a three-prong grounded

receptacle.

6. Slide your washer into position.

7. Level your washer by turning the leveling legs in or out as

necessary by hand or by using the wrench included with

your washer.

When your washer is level, tighten the locking nuts using

the wrench or (-) ﬂ athead screwdriver.

Your washer must be leveled on all four sides. A

carpenter’s level should be used on all four corners of

your washer. It’s the best to recheck after the ﬁ rst dozen

washes.

Avoid damage to the legs. Do not move

the washer unless the locking-nuts are

fastened to the bottom of the washer.

setting up your washer

Cold

Hot

Cold printed

Hot printed

Levelling

Leg

Locking

Nut

WF350AN-02833B-07_EN_20120712.indd Sec3:16WF350AN-02833B-07_EN_20120712.indd Sec3:16 2012-07-13  10:36:402012-07-13  10:36:40

washing a load of laundry _17

02 WASHING A LOAD OF LAUNDRY

washing a load of laundry

To reduce the risk of ﬁ re, electric shock, or injury to persons, read the IMPORTANT SAFETY

INSTRUCTIONS before operating this appliance.

LOADING YOUR WASHER

• You can ﬁ ll the tub with dry, unfolded clothes; but DO NOT OVERLOAD the tub.

• Overloading may reduce washing efﬁ ciency, cause excess wear, and possibly cause creasing or

wrinkling of the load.

• Wash delicate items such as bras, hosiery, and other lingerie in the delicates cycle with similar

lightweight items.

• When washing big bulky items or a few smaller items that don’t ﬁ ll the tub completely – a rug, a pillow,

stuffed toys, or one or two sweaters, for example – add a few towels to improve tumbling and spin

performance.

During the spin cycle, the washer may add additional water to redistribute the excessive imbalance

inside the tub.

•

When washing heavily soiled loads, do not overload your washer in order to assure good cleaning results.

• To add a forgotten item:

1. Press the Power button.

2. Press the Start/Pause button.

3. Wait for the door lock light to go out (Immediately).

4. Add the item, close the door, and press the Start/Pause button.

The door safety state continues for 15 seconds and the cycle is restarted.

To ensure thorough cleaning, add items within ﬁ ve minutes of starting the wash cycle.

GETTING STARTED

1. Load your washer.

2. Close the door.

Push the laundry into the tub completely to prevent the laundry from being caught in the door or from

falling out of the tub.

3. Press the Power button.

4. Add detergent and additives to the dispenser (See page 23~24).

5. Select the appropriate cycle and options for the load (See page 18~19).

6. Press the Start/Pause button.

7. The Wash Indicator will illuminate.

8. The estimated cycle time will appear in the display.

The time may ﬂ uctuate to better indicate the time remaining in the cycle.

The actual time required for a cycle may differ from the estimated time in the display depending on the

water pressure, water temperature, detergent, and laundry.

9. Before your washer starts to ﬁ ll, it will make a series of clicking noises to check the door lock and do a

quick drain.

• When the cycle is complete, the door lock light will go out and “End” will appear in the display.

• DO NOT attempt to open the door until the door lock light is off. To add a forgotten item, see

“Loading your washer” section (See page 17).

• When your washer is restarted after a pause, expect a delay of up to 15 seconds before the cycle

continues.

• Pressing the Power button cancels the cycle and stops your washer.

•

The Wash, Rinse and Spin indicators will illuminate during those portions of the cycle.

Do not place anything on top of your washer while it is running.

CAUTION

WARNING

WF350AN-02833B-07_EN_20120712.indd Sec11:17WF350AN-02833B-07_EN_20120712.indd Sec11:17 2012-07-13  10:36:412012-07-13  10:36:41

18_ washing a load of laundry

OVERVIEW OF THE CONTROL PANEL

Cycle Selector

Select the appropriate cycle for the type of load.

This will determine the tumble pattern and spin speed for the cycle.

To minimize wrinkling of your laundry, select the Perm Press cycle.

Normal - For most fabrics including cottons, linens, and normally soiled garments.

Heavy Duty - For sturdy, colorfast fabrics and heavily soiled garments.

Perm Press - For wash-and-wear, synthetic fabrics, and lightly to normally

soiled garments.

Sanitize - For heavily soiled, colorfast garments. This cycle heats the water to

150°F(65.6°C) to eliminate bacteria.

If Pause is selected during the heating portion of the Sanitize cycle, your

washer door will remain locked for your safety.

Bedding - For bulky items such as blankets and sheets. When you are

washing comforters, use liquid detergent.

Deep steam(WF350*) - For heavily soiled, colorfast garments, this cycle

provides high washing temperature and steam and is efﬁ cient in cleaning stains.

Delicates - For sheer fabrics, bras, lingerie silk, and other handwash-only

fabrics. For best results, use liquid detergent.

Hand Wash - For handwashable, special care garments.

Wool - For machine-washable wool. Loads should be under 8 pounds.

• The Wool cycle washes laundry by moving the wash drum horizontally to

maintain the characteristics of the wool ﬁ bers and to prevent damaging

the cloth. It then stops for a while to allow the laundry to soak in the

water.

• It is recommended using a neutral detergent to prevent damage to the

cloth and to improve the washing results.

The Wool cycle of this machine has been approved by

Woolmark for the washing of machine washable Woolmark

products provided that the products are washed according

to the instructions on the garment label and those issued by

the manufacturer of this washer, M1002 (Woolmark approval

number).

washing a load of laundry

7

65

4

21

8

93

WF350*

WF340* / WF330*

1

WF350AN-02833B-07_EN_20120712.indd Sec11:18WF350AN-02833B-07_EN_20120712.indd Sec11:18 2012-07-13  10:36:412012-07-13  10:36:41

washing a load of laundry _19

02 WASHING A LOAD OF LAUNDRY

Quick Wash - For lightly soiled garments needed quickly.

Rinse + Spin - Use for loads that need rinsing only or to add rinse-added

fabric softener to a load.

Digital graphic

display

Displays the remaining cycle time, all cycle information, and error messages.

Temperature

selection button

Press the button repeatedly to cycle through the different water temperature options.

Hot/Cold - Whites and heavily soiled, colorfast items.

Warm/Warm - Colorfast items. When warm rinse is selected, only the ﬁ nal rinse will

be warm.

The other rinses will be cold to conserve energy.

Warm/Cold - Moderately soiled, colorfast items; most wrinkle-free items.

Cold/Cold - Brightly colored, very lightly soiled items.

Spin selection

button

Press the button repeatedly to cycle through the different spin speed options.

High - Use for underwear, t-shirts, jeans and sturdy cottons.

Medium - Use for jeans, wrinkle-free or wash-and-wear items and synthetics.

Low - Use for delicate items needing a slow spin speed.

No Spin - Drains your washer without spinning. Use for extremely delicate items

that cannot tolerate any spin. Press and hold the button for approximately 2

seconds to get spin only cycle. It provides a spin to remove more water.

Soil Level

selection button

Press the button to select the soil level/washing time.

(Heavy  Normal  Light)

Heavy - For heavily soiled loads.

Normal - For moderately soiled loads. This setting is best for most loads.

Light - For lightly soiled loads.

Signal selection

button

Press the button to increase or decrease the end of cycle signal volume or

turn off the signal.

Wash Option

selection

buttons

Press these buttons to select different cycle options.

Pre Wash - To use this feature add detergent to the pre wash section of the

detergent compartment. When turned on, the washer ﬁ lls with cold water and

detergent, tumbles, then drains and advances to the selected wash cycle.

Some cycles cannot be selected with with this option (See page 35).

You cannot select the prewash option in the Delicate, Wool, Quick

Wash, Hand Wash and Rinse+Spin cycles.

Steam(WF350*) - Press this button to use the Steam Wash function. Steam

Wash is available with Heavy Duty, Normal, Perm Press, Sanitize, Bedding

cycles. For heavily soiled, colorfast garments, Steam Wash improves stain

treatment and use less water of each cycle (See page 35).

Extra Rinse(WF340*,WF330*) - Add an additional rinse at the end of the

cycle to more thoroughly remove laundry additives and perfumes.

Pure Cycle -

Use for drum cleaning. It cleanses the drum of dirt and bacteria.

Regular use (after every 40 washes) is recommended. No detergent or bleach

needed (see pages 28).

Delay Start -

Any cycle can be delayed for 1 to 24 hours in one-hour increments.

The displayed hour indicates the time at which the wash will be started.

Start/Pause

selection button

Press to pause and restart programs.

Power button

Press once to turn your washer on, press again to turn your washer off. If

the washer is left on for more than 10 minutes without any buttons being

touched, the power automatically turns off.

2

3

4

5

6

7

8

9

WF350AN-02833B-07_EN_20120712.indd Sec11:19WF350AN-02833B-07_EN_20120712.indd Sec11:19 2012-07-13  10:36:422012-07-13  10:36:42

20_ washing a load of laundry

washing a load of laundry

Child Lock

This function prevents children from playing with your washer.

Activating the Child Lock function

Press and hold both the Spin and Soil Level buttons simultaneously for approximately 3 seconds.

• If the Child Lock function is activated, the door is locked and the “Child Lock [ ]” lamp is lit.

• If the Start/Pause button is pressed after the Child Lock function is activated, none of the

buttons will work except for the Power button.

• If a button is pressed when the buttons are locked, the “Child Lock [ ]” lamp blinks.

Pausing the Child Lock function

When the door is locked or the buttons are locked by the Child Lock function, you can pause the

Child Lock operation for 1 minute by pressing and holding both the Spin and Soil Level buttons

simultaneously for approximately 3 seconds.

• If Child Lock mode is paused temporarily, the door lock is released for 1 minute for user

convenience. During this period, the “Child Lock [ ]” lamp blinks.

• If the door is opened after the minute is over, an alarm sounds for up to 2 minutes.

• If the door is closed within the 2 minutes, the door is locked and the Child Lock function is

reactivated. If the door is closed after the 2 minutes, the door will not be locked automatically

and no alarm will be heard.

Deactivating the Child Lock function

Press and hold both the Spin and Soil Level buttons simultaneously for approximately 6

seconds.

• If the Child Lock function is deactivated, the door is unlocked and the “Child Lock [ ]” is

turned off.

• Child Lock is a function to prevent children or the inﬁ rm from accidently operating the

washer and injuring themselves.

• If a child enters the washing machine, the child may become trapped and suffocate.

• Once the Child Lock function is activated, the Child Lock function continuous working

even if the power is turned off.

• Opening the door by force can result in injury due to damage to the product.

To add laundry when the Child Lock function is activated, you have to ﬁ rst pause or

deactivate the Child Lock function.

If you want to open the door of the washing machine when the Child Lock function is

activated:

• Pause or deactivate the Child Lock function.

• Turn the washing machine off and then on again.

Garment+

You can add or take out laundry items even after the wash has started, as long as the

“Garment+ ” light is turned on. Pressing the Start/Pause button unlocks the door, unless the

water is too hot or if there is too much water in your washer. If you are able to unlock the door

and wish to continue the wash cycle, close the door and press the Start/Pause button.

CAUTION

WARNING

WF350AN-02833B-07_EN_20120712.indd Sec11:20WF350AN-02833B-07_EN_20120712.indd Sec11:20 2012-07-13  10:36:422012-07-13  10:36:42

La page charge ...

Samsung WF340ANG/XAC Manuel utilisateur

Samsung WF340ANG/XAC Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents