Hoover F7411900 Mode d'emploi

www.hoover.com

OWNER’S MANUAL

Operating and Servicing Instructions

IMPORTANT: READ CAREFULLY BEFORE ASSEMBLY AND USE.

Questions or concerns? For assistance, please call Customer Service at 1-800-944-9200

Mon-Fri 8am-7pm EST. PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE.

THIS PRODUCT IS INTENDED FOR HOUSEHOLD USE ONLY.

IF USED COMMERCIALLY WARRANTY IS VOID.

Español - página E1

2

CONTENTS

Thank you for choosing a HOOVER

®

product.

Please enter the complete model and Manufacturing

Code in the spaces provided.

MODEL

MFG. CODE

Hint: Attach your sales receipt to this owner’s manual.

Verification of date of purchase may be required for

warranty service of your HOOVER

®

product.

Be sure to register your product online at Hoover.com or

call 1-800-944-9200 to register by phone.

1-800-944-9200

Made in China

MANUFACTURING CODE

If you need assistance:

Visit our website at hoover.com. Follow the authorized dealer locator link to find the Hoover

®

authorized

dealer nearest you or call 1-800-944-9200 for an automated referral of Hoover

®

authorized dealer

locations (U.S. only) or to speak with a customer service representative; Mon- Fri 8am- 7pm EST.

PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE.

(Label located on bottom of cleaner)

Important Safeguards .............................................................................................. 3

Cleaner Assembly .................................................................................................... 5

How To Use ............................................................................................................... 7

Cleaner Description .............................................................................................7

The Tanks ............................................................................................................8

How to Clean ............................................................................................................ 10

Tools .......................................................................................................................... 13

Maintenance ..............................................................................................................17

Nozzle ................................................................................................................. 17

Brushes ...............................................................................................................17

Valve.................................................................................................................... 18

Storage ................................................................................................................18

Lubrication ...........................................................................................................18

Troubleshooting ....................................................................................................... 19

Helpful Reminders ...............................................................................................19

Service.......................................................................................................................20

Cleaning Products .................................................................................................... 21

Warranty .................................................................................................................... 22

3

IMPORTANT SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS

When using an electrical appliance, basic precautions should always be

followed,includingthefollowing:

READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE.

WARNING: TO REDUCE THE RISK OF FIRE,

ELECTRIC SHOCK OR INJURY:

• Toavoidinternalcomponentdamage,useonlyHoover

®

cleaningproductsintended

forusewiththisAppliance.(SeeCleaningProductssectionofthismanual.)

• Useonlyonsurfaces moistenedby thecleaning processor smallspills. Donot

immerse product.

• Connecttoaproperlygroundedoutletonly.See“GroundingInstructions”.

• Donotcleanoverfloorelectricaloutlets.

• Donotusewithouttanksinplace.

• Useextracarewhencleaningonstairs.Donotplacecarpetcleaneronstairs.

• Usecarpetcleaneronlyforitsintendeduseasdescribedintheinstructions.

• UseonlyattachmentsrecommendedbyHoover

®

;othersmaycausehazards.

• Theuseofanextensioncordisnotrecommended.Ifanextensioncordisabsolutely

necessary,useatleasta16gauge3-wirecordwhichhasa3-pronggroundingtype

pluganda3-polereceptaclethatacceptsthemachineplug.

• Unplug carpet cleaner fromoutletwhennot in use. Turn off all controls before

unplugging.

• UnplugbeforeconnectingtheSpinScrub

®

handtool.

• Alwaysdisconnectcordfromelectricaloutletbeforeservicingthecarpetcleaner.

• Donotunplugbypullingoncord.Tounplug,grasptheplug,notthecord.

• Neverhandleplugorappliancewithwethands.

• Donotpullorcarrybycord,usecordasahandle,closedooroncordorpullcord

aroundsharpedgesorcorners.Donotrunapplianceovercord.Keepcordaway

fromheatedsurfaces.

• Donotusewithdamagedcordorplug.Ifapplianceisnotworkingasitshould,

hasbeen dropped,damaged, leftoutdoors, ordropped intowater, takeit toan

AuthorizedHoover

®

WarrantyServiceDealer.

• Closesupervisionisnecessarywhenanyapplianceisusedbyornearchildren.Do

notallowcarpetcleanertobeusedasatoyortorununattendedatanytime.

• Donotpointtoolstowardpeopleorpets.

• Toassistinreducingdryingtime,becertaintheareaiswellventilatedwhenusing

detergentsandothercleanerswiththismachine.

• Keepdetergentsandothercleanersoutofchildren’sreach.

• Donotusetopickupflammableorcombustibleliquidssuchasgasolineorusein

areaswheretheymaybepresent.

• Donotpickupchlorinebleach,draincleaner,gasolineoranyothertoxicmaterial

withthisappliance.

• Donotpickupanythingthatisburningorsmoking,suchascigarettes,matches,or

hotashes.

4

• Avoidpickinguphard,sharpobjectswiththecarpetcleaner.Theymaydamagethe

machine.

• Keephair,looseclothing,fingers,feetandallpartsofbodyawayfromopeningsand

movingparts.

• Useindoorsonly.

• Donotputanyobjectintoopenings.Donotusewithanyopeningblocked;keepfree

ofdust,lint,hair,andanythingthatmayreduceairflow.

• Tohelppreventmattingandresoiling,avoidcontactwithcarpetsuntiltheyaredry.

Keepchildrenandpetsawayfromcarpetsuntiltheyarecompletelydry.

• Storeinadryplace.Donotexposemachinetofreezingtemperatures.

• Donotleaveapplianceunattendedwhenpluggedin.

• DONOTUSETHISEXTRACTORONHARDFLOORSUNLESSYOUHAVETHEPROPER

HARDFLOOR ATTACHMENT.USINGTHIS MACHINEONHARDFLOORS WITHOUT

PROPERATTACHMENTMAYSCRATCHORDAMAGEYOURFLOOR.

GROUNDING

OUTLET BOX

GROUNDING INSTRUCTIONS

Thisappliancemustbegrounded.Ifitshouldmalfunctionorbreakdown,grounding

providesapathofleastresistanceforelectricalcurrenttoreducetheriskofelectric

shock. This appliance is equipped with a cord having an equipment-grounding

conductor(C)andgroundingplug(A).Theplugmustbepluggedintoanappropriate

outlet(B)thatisproperlyinstalledandgroundedinaccordancewithalllocalcodes

and ordinances.

DANGER: Improperconnection oftheequipment-grounding conductorcan

resultintheriskofelectricshock.Checkwithaqualifiedelectricianorserviceperson

ifyouareindoubtastowhethertheoutletisproperlygrounded.Donotmodifytheplug

providedwiththeappliance-ifitwillnotfittheoutlet,haveaproperoutletinstalledby

aqualifiedelectrician.Thisapplianceisforuseonanominal120voltcircuitandhas

agroundingplugthatlooksliketheplug(A)illustratedinsketch(Fig.1).Atemporary

adapter(D)maybeusedtoconnectthisplugtoa2-polereceptacle(E)ifaproperly

groundedoutletisnotavailable(Fig.2).Thetemporaryadaptershouldbeusedonly

untilaproperlygroundedoutlet(B)canbeinstalledbyaqualifiedelectrician(Fig.1).

Thegreencoloredrigidear,lug,orthelike(F)extendingfromtheadaptermustbe

connectedtoapermanentground(G)suchasaproperlygroundedoutletboxcover

(Fig.2).Whenevertheadapterisused,itmustbeheldinplacebyametalscrew.

NOTE:InCanada,theuseofatemporaryadapterisnotpermittedbytheCanadian

Electrical

Code.

F

G

E

D

A

B

C

1

2

1. CLEANER ASSEMBLY

5

A. Cleaner

B. Upper Handle

C. Handle Bolts and Nuts (Three nuts may be in

bag but only two or need for assembly. Bolts and

nuts located in bag with hose)

D. Hose/Cord Hook

E. SpinScrub

®

Brush Assembly

Remove all parts from carton and identify each

item shown.

Make sure all parts are located before disposing of

packing materials.

1.2 Remove tank.

1.3 Position cord protector.

1.4 Slide handle down.

1.5 Insert bolts and attach nuts. Tighten with

screwdriver.

ATTACH HANDLE

CARTON CONTENTS

1.3

1.4

1.5

1.2

1.1

Carpet

Upholstery

Cleaner

Pre-

Cleaner

Bare

floor

cleaner

A

B

C

D

E

H

I

G

F. Hose/Tool Caddy*

G Hose

H Stair/Upholstery Nozzle

I. SpinScrub

®

Hand Tool*

*Available on select models only. Accessories not

included with your model may be purchased

separately by visiting hoover.com.

NOTE: Phillips screwdriver needed for assembly.

F

Cord Protector

-V2

Actual model may vary from images shown.

6

1.6 1.7

REPLACE UPPER TANK

1.6 Position bottom of

tank onto cleaner.

1.7 Push top of tank

and tank handle while

supporting back of

cleaner with other hand.

1.8 Push up on handle

to latch it to cleaner.

Check tank to make

sure it is secure.

1.8

1.9

ATTACH HOSE/CORD HOOK

1.9 Snap hook onto

cleaner.

ATTACH TOOL CADDY

(for storage on cleaner)

(Available on select models only)

1.10 Insert tabs.

1.11 Slide caddy down. Notch (B) rests on hook (C).

1.10

1.11

STORE HOSE

1.12 Start.

1.13 Wrap.

1.14 Finish. Use clips

(D) to secure hose and

solution tube (E and in-

set).

1.12

1.13 1.14

E

D

STORE TOOLS

1.15

IMPORTANT

Tool caddy is removable for storage on wall or

in closet.

1.15 Store Tools on

back side of cleaner as

shown.

C

B

D

E

Actual model may vary from images shown.

2. HOW TO USE

CLEANER DESCRIPTION

1. Hand Grip

2. SolutionTrigger: press to release

cleaning solution

3. ON/OFF Switch

4. Rinse Setting Switch

5. SpinScrub

®

Hand Tool*

6. Carry Handle

7. Clean Water Tank Handle

8. Clean Water Tank

9. Detergent Container

10. Dirty Water Tank Handle

11. Dirty Water Tank

12. Dirty Water Tank Latches

13. SpinScrub

®

Mode Selector

14. Solution Tube Connection Port

15. Edge Cleaners: provided on both

sides of nozzle to remove dirt

near baseboards

16. Nozzle

17. Hose Connection Port

18. Cord Hook: rotates for quick cord

release

19. Hose*

20. Hose/Tool Caddy*

21. Stair/Upholstery Nozzle*

22. Cord/Hose Hook

23. Handle Release Pedal

24. Wheels

Operate cleaner only at voltage specified on data plate on bottom

of cleaner.

This cleaner is intended for household use.

2

4

1

8

11

13

12

5

9

17

14

3

6

7

10

15

16

24

20

21

23

18

19

22

2.1

ON

OFF

WASH

AUTO RINS

E

Rinse

2.2

2.3

ON-OFF SWITCH

HANDLE RELEASE PEDAL

To turn cleaner ON,

push switch down.

To turn cleaner OFF,

push switch up.

Step on pedal (A) to

lower handle to

operating position.

Handle does not lock

into a single position but

“floats” to allow

convenient operation.

A

2.4

TRANSPORTING

To move your cleaner

from room to room, put

handle in upright and

locked position, tilt

cleaner back on wheels

and push forward.

2.5

CARRY HANDLE

The cleaner may also

be lifted by placing a

hand above the upper

clean water tank handle

as shown.

7

Actual model may vary from images shown.

*Accessories not included with your

model may be purchased separately

by visiting www.hoover.com, or your

local HOOVER

®

service center.

CAUTION

! !

DO NOT USE THIS EXTRACTOR ON HARD FLOORS

UNLESS YOU HAVE THE PROPER HARD FLOOR

ATTACHMENT. USING THIS MACHINE ON HARD FLOORS

WITHOUT PROPER ATTACHMENT MAY SCRATCH OR

DAMAGE YOUR FLOOR.

8

SPINSCRUB

®

MODE SELECTOR

Your SteamVac

®

cleaner has two agitator brush

settings.

SPILL PICK-UP - brushes OFF for picking up spills

or cleaning carpets and hard floors when brushing

is not desired.

POWER SCRUB - brushes at maximum speed for

cleaning carpets

Slide setting selector to the desired setting before

cleaning.

THE TANKS:

CLEAN WATER SOLUTION TANK

(upper tank)

2.7 The clean water tank (C) holds the water that

will either be mixed with detergent for cleaning the

carpet or floor, or used to rinse the carpet or floor.

The detergent container (D) is permanently attached

to the water tank. It holds the detergent that mixes

with the water.

2.6

2.7

C

D

Unplug cleaner from electrical outlet.

To remove tank, press down on tank handle and pull

forward.

2.8 Fill tank (E) with hot tap water.

How to Fill

CAUTION

! !

Do not fill with water above 140°F (60°C).

E

2.8

F

2.9

2.9 - 2.10 Fill detergent container (F) with Hoover

®

Carpet/Upholstery Detergent.

Replace container cap and tighten.

2.11 Position bottom of tank onto cleaner using one

hand on each side of the tank to center it on the unit.

2.10

2.11

IMPORTANT

The tank pivots towards the back of the unit.

Push the top of the tank and tank handle while

supporting the back of the unit with your other

hand.

IMPORTANT

Use only HOOVER

®

SteamVac

®

detergents.

They are specially formulated for use with your

SteamVac

®

cleaner. Non-Hoover

®

cleaning

solutions may harm the machine and void the

warranty.

Actual model may vary from images shown.

9

How to Fill (continued)

2.12 Push up on the handle once the tank is

back to latch it to the unit.

Check tank to make sure it is securely latched.

2.13 There may be a small amount of water

(indicated by arrows) on the base when the

tank is removed from the unit. This is a normal

condition.

CAUTION

! !

Detergents contain Anionic and Nonionic

Surfactants. Avoid contact with eyes and

skin. In case of contact with eyes, flush

with cold water for 15 minutes. In case

of contact with skin, wash with water. If

irritation persists, call a physician.

WARNING

! !

Certain oxygenated-type cleaners, such as OxiClean*

and TuffOxi** will damage your SteamVac

®

detergent

container (A), Clean Water Tank (B) or Dirty Water

Tank (C).

Use only HOOVER

®

SteamVac

®

Oxy detergent

for this purpose.

*OxiClean is a registered

trademark of Orange Glo

International, Inc.

**TuffOxi is a trademark of

Tuff Products for Pets.

A

B

C

2.12

2.13

DIRTY WATER TANK

(lower tank)

The Dirty Water Tank holds the dirty solution that is

picked up from the surface being cleaned.

When the Dirty Water Tank is full, the automatic

shut-off will engage, suction will stop and the tank

must be emptied (see Automatic Shut-Off section).

How to Empty

Turn cleaner off and unplug from electrical outlet.

To prevent possible leaking, remove clean water

tank by pressing down on tank handle and pulling

forward; set tank aside (do not set tank on furniture).

2.14 Turn Dirty Water Tank latches (G) outward

(one on each side of tank). Raise handle straight up

and lift tank off cleaner. Carry tank to sink or drain.

2.15 Lower handle toward back of tank to unlock lid.

Lift lid off tank.

Empty tank and reposition lid.

For full suction, it is important that the Dirty Water

Tank lid is properly secured before cleaning.

Raise tank handle to carrying position and place it

onto cleaner. Lower handle to front of tank.

Turn latches (one on each side of tank) inward to

lock tank in place.

2.14 2.15

G

IMPORTANT

Make sure the tank handle is moved forward to

lock the tank lid before putting cleaner in upright

position. Failure to secure properly may result

in damage to the tank handle and may cause

poor suction.

Actual model may vary from images shown.

10

BEFORE YOU BEGIN CLEANING

a. Vacuum thoroughly - For carpet, use a HOOVER

®

vacuum cleaner with an agitator for best results.

Vacuum upholstery with a vacuum cleaner with

cleaning tool attachments. Use a crevice tool to

reach into tufts and folds. Do not use the carpet

cleaner as a dry vacuum cleaner.

b. For upholstery, check cleaning code - Use your

HOOVER

®

carpet cleaner only if the upholstery

fabric is marked with a “W” (for “wet” clean) or “S/W”

(for “solvent/dry” or “wet” clean). Do not clean fabric

marked “S” (“solvent/dry” clean only). If your

upholstery does not have a code, seek professional

assistance.

c. Test for colorfastness - Wet a white absorbent

cloth with the detergent. In a small, hidden area,

gently rub the surface with the dampened cloth.

Wait ten minutes and check for color removal or

bleed with white paper towel or cloth. If surface has

more than one color, check all colors.

d. When cleaning entire floor, move furniture out of

area to be cleaned (may not be necessary if only

high traffic areas are to be cleaned). For furniture

too heavy to move, place aluminum foil or wax

paper under legs. This will prevent wood finishes

from staining carpet. Pin up furniture skirts and

draperies.

e. Pretreat spots and heavy traffic areas with

HOOVER

®

Spot & Stain Spray Cleaner*- Follow

Directions on bottle.

f. To prevent staining, use plastic or aluminum foil to

protect wood or metal surfaces from possible water

spray.

g. To avoid wetting and possible damage to wood

floors underneath area rugs/carpet, either move

area rugs/ carpet to a non-wood hard floor surface

or place waterproof material (e.g. plastic)

underneath them before cleaning.

*Available at additional cost if not included with your

model.

3. HOW TO CLEAN

AUTOMATIC SHUT OFF

When the Dirty Water Tank (lower tank) is full the automatic shut off mechanism

will shut off the cleaner suction (suction will be noticeably reduced).

2.16 At that time, the yellow float disk will rise to the top of the Dirty Water Tank

lid (B). The cleaner will no longer pick up dirty solution and the motor sound will

become noticeably higher in pitch.

When this happens, turn cleaner off and empty Dirty Water Tank before

continuing use.

Check clean water tank also; it may need to be refilled.

Do not use without float and float retainer in place. If broken or dislodged, take

to an Authorized Dealer for repair.

2.16

B

Actual model may vary from images shown.

11

ON

OFF

WASH

AUTO RINSE

Rinse

3.1/3.1a

CLEANING CARPET

Read “Before You Begin Cleaning” instructions

above.

Fill Clean Water Tank according to instructions for

Figs. 2.9.

Fill detergent container with Hoover

®

detergent

according to instructions for Figs. 2.10 and 2.11.

Select proper SpinScrub

®

mode (see pg. 8).

Dry hands and plug cord into a properly grounded

outlet.

Do not clean over floor electrical outlets.

To avoid walking on damp carpet, start at the end of

the room farthest from the door or path to sink

where tanks will be emptied and filled.

Step on handle release pedal and lower handle to

operating position.

3.1 Set Rinse Setting switch to Wash/Rinse. Turn

cleaner ON.

3.2 Squeeze trigger to apply cleaning solution and

slowly push cleaner forward (equals one wet

stroke).

Continue to squeeze trigger and slowly pull cleaner

back toward you (second wet stroke).

IMPORTANT

To assure proper rinsing, it is important to keep

the cleaner on the same path backward as

forward.

3.2

ON

OFF

Rinse

WASH

AUTO RINSE

3.3

IMPORTANT

To avoid saturating carpet, do not use more

than 4 wet strokes over one area. Always end

with dry strokes.

Keep nozzle flat on floor for both forward and

reverse strokes.

3.3 If you would like to rinse the carpet with water

only, set Rinse Setting switch to RINSE. Repeat

cleaning motion. In this setting, rinsing will be done

on both forward and reverse strokes.

For heavily soiled areas, repeat cleaning motion.

Avoid saturating carpet, as noted.

It is best to alternate wet and dry strokes as

described above.

For best cleaning results and to aid in faster drying

of carpet, end with more dry strokes. (Continue

using dry strokes until little water is visible passing

through the Dirty Water Tank lid.)

Empty Dirty Water Tank when the motor sound

becomes higher pitched and there is a loss in

suction (see “Automatic shut-off”, Fig. 2.17).

When finished cleaning, follow “After Cleaning”

instructions on page 13.

Release trigger and slowly push cleaner forward

over area just sprayed with solution (dry stroke).

Then slowly pull cleaner back toward you without

squeezing trigger (dry stroke). Continue using dry

strokes until little water is visible passing through

the Dirty Water Tank lid (Pass over the same area a

minimum of 4 times = 2 while squeezing the trigger

and 2 without).

For best results, use straight, parallel strokes.

Overlap strokes by 1 inch to help prevent streaking.

Actual model may vary from images shown.

3.2a

AUTO

WASH RINSE

FOR MODELS WITH AUTO RINSE FEATURE

(available on select models only)

3.1a Set Rinse Setting switch to Wash/Auto

Rinse. Turn cleaner ON.

3.2a Squeeze trigger to apply cleaning

solution and slowly push cleaner forward

(equals one wet stroke).

Continue to squeeze trigger and slowly pull

cleaner back toward you (second wet stroke).

The cleaner rinses the carpet on the

backward pass.

12

PICKING UP SPILLS

Your HOOVER

®

SteamVac

®

cleaner may also be

used to pick up small liquid spills on carpet or

uholstery.

For best results, pick up spills immediately by

placing the stair/upholstery nozzle just above the

spill and suction up any residue on top of the carpet.

If the spill remains, place either the stair/ upholstery

nozzle or floor nozzle with the SpinScrub

®

mode

selector to SPILL PICK-UP in front of the spill, pull

the nozzle very slowly over the spill initially with

suction only. Repeat with spray and suction.

If a spot is left, the stair/upholstery nozzle is

generally more effective for removing it. Although no

cleaning solution can completely remove all spots,

they can be treated by following the instructions

provided by the manufacturer of the carpet,

upholstery, or hard floor surface being cleaned.

Do not use the SteamVac

®

cleaner to pick up

flammable or combustible liquids or chemicals.

When finished, follow “After Cleaning” instructions.

AFTER CLEANING

Allow carpet or upholstery to dry. To help prevent

matting and resoiling the carpet, keep children and

pets away from surface until it is completely dry. If it

is necessary to walk on damp carpet, place towels

or white cloths on the traffic areas.

If furniture must be replaced before the carpet is dry,

place plastic or aluminum foil under legs of furniture

so metal slides or wood finishes will not stain the

carpet.

Empty tanks, rinse with clean water and let air dry.

Rinse the Dirty Water Tank lid and let air dry.

3.4 Remove lint from filter screen located inside

Dirty Water Tank.

3.5 Remove lint from filter screen located on bottom

of cleaner.

3.4 3.5

IMPORTANT

When brushes seem to be rotating slowly,

disconnect cleaner from electical outlet and

check and clean this screen.

Actual model may vary from images shown.

13

ATTACH HOSE

4. TOOLS

CAUTION

! !

To reduce the risk of injury from moving parts,

unplug cleaner.

How to Attach

4.1 Open hose connection port (A).

Insert short hose end, matching tabs on hose with

same-sized slots in connection port.

Push hose into port and lock in place.

4.2 Plug solution tube firmly into solution connection

port (B).

How to Remove

4.2 Squeeze latches (C) on top and bottom of hose.

Remove hose from port. Close door.

Remove solution tube from solution connection port.

4.1

A

4.2

C

B

TOOLS

A. SpinScrub

®

Hand Tool (Available on select

models only) has rotating brushes for extra

scrubbing action on small carpet areas, carpeted

stairs and upholstery. For some models, the brushes

can be removed for converting to the scrub module.

(Available on select models only)

B. Stair/Upholstery Nozzle has a built-in brush to

help provide the scrubbing action some spots may

need for removal.

A

B

4.3

SPINSCRUB

®

HAND TOOL

(Available on select models only)

4.4 To remove the SpinScrub

®

hand tool pull tool

down and outward.

To reposition the tool, reverse this procedure.

How to Reattach Tool Cover

4.5 The tool cover is designed with a break-away

feature which allows it to snap free if it is pushed

open too far.

To reattach, align hinges of cover with holes on

sides of tool storage area. Snap door into place.

4.4 4.5

Actual model may vary from images shown.

14

G

H

How to Attach Tools

Place handle in upright position and remove hose

from rack.

All tools attach to the hose in the same manner:

4.6 Connect tool to hose by sliding it onto connector

until the tab (G) locks it securely.

Using your thumb, push forward and up on the latch

(H) to remove tool.

4.6

After Using Tool

Drain suction hose by turning cleaner ON and

holding nozzle up for several minutes. Do not press

trigger.

CAUTION

! !

To reduce the risk of injury from moving parts,

unplug cleaner.

4.7 4.8

Disconnect hose and solution tube from cleaner.

4.7 Drain solution tube by placing round end in

sink and raising nozzle above your head. Press

the trigger.

4.8 The tool caddy can be removed and hung on

a coat hanger for storage or placed back on the

cleaner.

CAUTION

! !

To reduce the risk of injury from moving parts,

unplug cleaner.

Actual model may vary from images shown.

15

Read “Before You Begin Cleaning” instructions on

page 10.

Attach hose and solution tube as instructed in Figs.

4.1 and 4.2.

Place handle in upright position. Agitator brushes

will not rotate while handle is in upright position.

Fill clean water tank according to instructions for

Figs. 2.9 to 2.11.

Fill detergent container with HOOVER

®

detergent

according to instructions for Fig. 2.11.

Attach tool to end of hose.

Hose length may require that machine be placed at

the top of the stairs to clean upper half of stairway

and at bottom of stairs to clean lower half.

CLEANING CARPETED STAIRS

A

B

4.9

4.10

WARNING

! !

To prevent machine from falling, use extra

caution when cleaning on stairs.

Do not place cleaner on stairs.

Do not point tools toward people or pets.

Dry hands and plug cleaner into a properly grounded

outlet.

Set Rinse Setting switch to WASH. Turn cleaner

ON.

4.9 Pre-spray the carpeted stair by holding the tool

(A) or (B) about one inch above the carpet and push

it forward while pressing the trigger (equals one wet

stroke).

Position tool against the riser and slightly press it

into carpet pile. Press the trigger and pull the tool

slowly over the carpet (second wet stroke). Release

trigger at end of stroke.

4.10 Lift tool, and position it against riser. Pull tool

slowly over carpet without pressing trigger (dry

stroke).

Overlap strokes by 1/2 inch to help prevent

streaking.

It is best to alternate wet and dry strokes as

described above. End with more dry strokes to aid

in faster drying of carpet.

To avoid saturating carpet, do not use more than

4 wet strokes over any one area. Always end with

dry strokes.

If additional cleaning is necessary, wait until the

carpet is completely dry before using the tool again.

Empty Dirty Water Tank when the motor sound

becomes higher pitched and there is a loss in suction

(see “Automatic Shut-Off”, Fig. 2.17).

When finished cleaning, follow “After Cleaning”

instructions on page 12 and “After Using Tool”

instructions on page 14.

Actual model may vary from images shown.

16

CLEANING UPHOLSTERY

Read “Before You Begin Cleaning” instructions on

page 10.

Be sure to check the cleaning code on your

upholstery. Use your cleaner only on upholstery

marked “W” or “W/S”.

Attach hose and solution tube as instructed in Figs.

4.1 to 4.2.

Place handle in upright position. Agitator brushes

will not rotate while handle is in upright position.

Fill Clean Water Tank according to instructions for

Figs. 2.9 to 2.11.

Fill detergent container with HOOVER

®

detergent

according to instructions for Fig. 2.10. Do not

use hard floor cleaning solution when cleaning

upholstery.

Attach tool to end of hose.

Do not point tools toward people or pets.

Dry hands and plug cleaner into a properly grounded

outlet.

4.11

4.12

IMPORTANT

RINSE is not available during tool use. The hose

will only dispense water mixed with detergent.

Set Rinse Setting switch to WASH. Turn cleaner

ON.

4.11 Gently press the tool onto the fabric. Press the

trigger and slowly pull the nozzle over the fabric.

Overlap strokes by 1/2 inch to help prevent

streaking.

Make additional strokes without pressing the trigger

to remove more moisture.

To clean in corners or creases, lift the tool one half

inch from the fabric and press the solution trigger.

Vacuum up the solution with the tool without

pressing the trigger.

4.12 For heavily soiled areas, it may be necessary

to repeat the cleaning process. Make crisscrossing

strokes to the original pattern; overlap each pass.

Make no more than 2 passes with the solution over

any one area to prevent over-wetting and damage

to fabric.

If additional cleaning is necessary, wait until the

upholstery is completely dry before using the tool

again.

Empty Dirty Water Tank when the motor sound

becomes higher pitched and there is a loss in

suction (see “Automatic Shut-Off”, Fig. 2.17).

When finished cleaning, follow “After Cleaning”

instructions on page 12 and “After Using Tool”

instructions on page 14.

Actual model may vary from images shown.

17

If lint or other debris becomes lodged in nozzle, it

can be removed for cleaning.

NOZZLE: How to Clean

CAUTION

! !

To reduce the risk of injury from moving parts,

unplug cleaner before servicing.

Remove both tanks as described in Fig. 2.16. With

handle in upright position, tilt cleaner back so that

handle rests on the floor.

5.1 Lift up rear edge of nozzle. Slide nozzle up and

remove from cleaner.

5.2 To replace nozzle, line up tabs (A) on nozzle

with holes (B) in cleaner. Slide tabs into holes.

5.1

5.2

B

A

BRUSHES: How to Change and Clean

Your cleaner is equipped with removable brushes.

Follow these directions for changing brush

assemblies or for easy cleaning.

How to Remove

To prevent possible leaking, remove Clean Water

Tank and Dirty Water Tank. Set tanks aside.

With handle in upright position, tilt cleaner back until

handle rests on the floor.

5.3 Grab brush assembly and pull firmly.

The brushes can be cleaned under running water.

CAUTION

! !

To reduce the risk of injury from moving parts,

unplug cleaner before servicing.

Slide nozzle completely onto cleaner. Press down

on nozzle to secure it.

Replace Dirty Water Tank (Fig. 2.16).

The nozzle must be in the proper position in order

for the Dirty Water Tank to go on properly.

5.3

5. MAINTENANCE

Familiarize yourself with these home maintenance tasks as proper use and care of your cleaner will ensure

continued cleaning effectiveness.

Any other servicing should be done by an authorized service representative.

How to Replace

5.4 Align posts (A) on both ends of brush assembly

with slots (B) in cleaner housing.

Make sure that the square post (C) also aligns with

the square hole (D). Turn brushes slightly until post

fits easily into hole.

Press brush assembly firmly to snap into place.

A

B

C

D

5.4

Actual model may vary from images shown.

18

LUBRICATION

The motor is equipped with bearings that contain

sufficient lubrication for the life of the motor.

The addition of lubricant could cause damage.

Therefore, do not add lubricant to motor

bearings.

STORAGE

Before storing:

• Empty Clean Water Tank and let air dry.

Replace on cleaner.

• Empty Dirty Water Tank, rinse tank and lid

thoroughly with clean water and let air dry.

Allow brushes and underside of carpet cleaner

to air dry thoroughly before storing carpet

cleaner on a carpeted or wood surface.

A

B

C

5.7

5.6

5.5

Remove Clean Water

Tank.

5.5-5.6 Turn valve cap

(A) counter clockwise

and remove.

Soak valve cap in warm

water for at least 15

minutes. Wipe cap dry.

5.7 Align slots (B) on

cap with tabs (C) in

opening.

Turn cap clockwise to

tighten.

VALVE:

How to Unclog

Actual model may vary from images shown.

19

6. TROUBLESHOOTING

If a minor problem occurs, it usually can be solved quite easily when the cause is found by using the

checklist below.

Any other servicing should be done by an authorized service representative.

WARNING

! !

To reduce risk of personal injury - unplug cleaner before servicing.

PROBLEM POSSIBLE CAUSE

POSSIBLE SOLUTION

Cleaner won’t run.

1. Not firmly plugged in.

1. Plug unit in firmly.

2. No voltage in wall plug.

2. Check fuse or breaker in home.

3. Blown fuse or tripped

breaker.

3. Replace fuse or reset breaker in home.

Low suction. 1. Dirty Water Tank full/

automatic shut off engaged.

1.Remove and empty Dirty Water Tank. Clean

filter screen.

2. Blockage In tool on end of

hose.

2. Remove tool and clear blockage.

3. Dirty Water Tank lid not on

correctly.

3. Make sure lid is on securely.

4. Clean Water Tank empty, but

detergent remains.

4. Fill Clean Water Tank

Clean water won’t

dispense.

1. Clean Water Tank not firmly

in place.

1. Make sure tank is securely locked in

position.

2. Clean Water Tank or

detergent container empty.

2. Refill container according to instructions for

surface being cleaned.

3. Dirty Water Tank lid not on

correctly.

3 .Make sure lid is firmly in place.

Detergent won’t

dispense

1. Valve cap clogged. 1. Remove and clean valve cap

(see instructions below).

Brushes/brush

indicator won’t

rotate during floor

cleaning.

1. Dirty filter screen on bottom

of unit.

1. Clean screen.

HELPFUL REMINDERS

• Use HOOVER

®

brand detergents; others may

foam too much or cause leaking.

• Use extra dry strokes to aid in faster drying of the

carpet.

• 6.1 Fill tank (A) with hot (under 140˚F /60˚C) tap

water ONLY. Do not put any detergent in water

tank. Fill detergent container (B) with HOOVER

®

detergent.

• 6.2 Secure Dirty Water Tank lid before cleaning.

• Empty Dirty Water Tank when full or when

automatic shut-off engages.

6.1

B

A

6.2

CAUTION

! !

Unplug the cleaner before doing any of the

following.

Actual model may vary from images shown.

20

To obtain approved Hoover

®

service and genuine Hoover

®

parts, locate the nearest Authorized Hoover

®

Warranty Service Dealer (Depot) by:

• Checking the Yellow Pages under “Vacuum Cleaners” or “Household”.

• Visit our website at hoover.com (U.S. Customers) or hoover.ca (Canadian customers).

Follow the service center link to find the service outlet nearest you.

• For an automated referral of authorized service outlet locations call 1-800-944-9200.

Do not send your vacuum to Hoover

®

, Inc., Company in Glenwillow for service. This will only result in delay.

If you need further assistance:

To speak with a customer service representative call 1-800-944-9200; Mon-Fri 8am-7pm EST. In Canada,

contact Hoover

®

Canada, Toronto: 755 Progress Ave., Scarborough, ON M1H 2W7 OR Hoover

®

Canada,

Edmonton: 18129-111 Ave., Edmonton, AB T5W 2P2, Phone: 1-800-944-9200, Mon-Fri 8am-7pm EST.

Always identify your vacuum by the complete model number when requesting information or ordering parts.

(The model number appears on the bottom of the vacuum.)

PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE.

7. SERVICE

La page charge ...

Hoover F7411900 Mode d'emploi

Hoover F7411900 Mode d'emploi

dans d''autres langues

Documents connexes

Autres documents