Yamaha ES6 Manuel utilisateur

Marque: Yamaha

Modèle: ES6

Catégorie: Égaliseurs audio

Taper: Manuel utilisateur

Ce manuel convient également à

Contents

What is the Voice Editor?............................ 2

About Studio Manager................................. 3

What is Total Recall .................................... 3

About Open Plug-in Technology.................. 4

Starting the Voice Editor ............................ 6

Menu Bar ..................................................... 7

Library Window ......................................... 10

Edit Window............................................... 20

An Example of Voice Editor in Use........... 32

Troubleshooting......................................... 33

• Copying of the commercially available music sequence data and/or digital audio ﬁles is strictly

prohibited except for your personal use.

• The software and this owner’s manual are exclusive copyrights of Yamaha Corporation.

• Copying of the software or reproduction of this manual in whole or in part by any means is

expressly forbidden without the written consent of the manufacturer.

•Yamaha makes no representations or warranties with regard to the use of the software and

documentation and cannot be held responsible for the results of the use of this manual and the

software.

• The screen displays as illustrated in this Owner’s Manual are for instructional purposes, and

may appear somewhat different from the screens which appear on your computer.

• Click on the red-colored text to jump to the related item in this manual.

• The company names and product names in this Owner’s Manual are the trademarks or

registered trademarks of their respective companies.

This owner’s manual assumes that you are already familiar with basic Windows/Macintosh opera-

tions.

If you are not, please refer to the owner’s manual which came with your Windows/Mac OS software

before using Voice Editor.

For information about hardware requirements, the interconnection of devices and the installation of

the Voice Editor software, refer to the separate “Installation Manual” as well as the Owner’s Manual

for the respective MIDI device.

The screen illustrations in this manual are mainly taken from Windows.

About Menu/Button Name

When the name of the menu or button differs in Windows and Macintosh, the names are indicated

as “Windows name (Macintosh name)” in the manual.

What is the Voice Editor?

With the Voice Editor, you can edit your tone generator’s voices and effects via your computer.

Thanks to the easy-to-understand graphical interface, you can edit virtually all of the voice

parameters of MOTIF ES6/7/8 right from your computer — using the mouse to adjust the virtual

knobs, sliders, and buttons and entering values from the computer keyboard. Finally, all the

changes you have made to your voices can be saved to your computer.

You can use this Voice Editor as a plug-in for the software below.

• Studio Manager

• Sequencer compatible with Open Plug-in Technology (OPT).

MOTIF ES6/7/8

Transmit / Receive bulk data

Library Window Save the Library file

Import a voice

Edit Window

Voice

Element dialog

Set the effects parameters

About Studio Manager

Studio Manager is a cross-platform application that enables you to start multiple Editors for

controlling YAMAHA hardware products remotely, and to save multiple Editor settings.

For more information, refer to the separate Installation Guide or the Studio Manager PDF manual.

What is Total Recall

You can save and recall each Editor’s settings in Studio Manager. This enables you to recall all the

settings of multiple devices from Studio Manager and control the entire system using simple

operations. This capability is called the “Total Recall” function.

Also, if you are saving the setup ﬁles or trying to synchronize multiple devices, you can recall all

the settings for multiple devices using Studio Manager. Alternatively, you can recall the settings

only for a certain device using the Editor of the corresponding device.

For more information, refer to the Studio Manager PDF manual.

Right-click the Voice Editor icon in the Studio Manager window. Select “Conﬁgure Total Recall,”

then select the data to be recalled. The data that can be selected differs depending on the Editor.

The following data types can be selected in the MOTIF ES Voice Editor.

• All.............................................. Current, Normal User 1/2, Drum User, and Plug-in 1-3 Voice data

• Current...................................... Voice data currently being edited

• Normal User 1 Voice ................. Normal User 1 Voice data

• Normal User 2 Voice ................. Normal User 2 Voice data

•Drum User Voice....................... Drum User Voice data

• Plug-in 1 User Voice ................. Plug-in 1 User Voice data

• Plug-in 2 User Voice ................. Plug-in 2 User Voice data

• Plug-in 3 User Voice ................. Plug-in 3 User Voice data

(You can select multiple data simultaneously from the Current, Normal User 1/2, and Drum User,

Plug-in 1-3 Voices.)

• When starting the Voice Editor from the Studio Manager, you can save the Voice Editor data into

the Session ﬁle of Studio Manager.

• When using DAW (digital audio workstation) software compatible with Total Recall and the Studio

Manager together, the Voice Editor data will be saved into the Project ﬁle (Song ﬁle) of the DAW.

About Open Plug-in Technology

Open Plug-in Technology (OPT) is a new software format that enables you to control MIDI devices

from a music DAW application software. For example, this allows you to start up and operate

various parts of your music system, such as plug-in board editors, and mixing control editors -

directly from an OPT-compatible sequencer, without having to use each separately. OPT also

makes it unnecessary to set MIDI drivers for each application, streamlining your music production

system and making all operations more convenient and seamless.

In addition to the original OPT, there is also Open Plug-in Technology Version 2 (OPT 2), designed

for use with the Total Recall software. Studio Manager is a host application that supports OPT 2.

About the OPT Levels and Overview

The host application and its compatibility with OPT is divided into three levels, as shown below.

Level 1

OPT Panels provides basic support for opening and displaying OPT control panels

that can transmit data via the client’s external MIDI ports. Typically this will allow

basic hardware editor control panels to operate properly.

Level 2

OPT Processors provides support for real-time MIDI processors and panel automa-

tion.

Typically this will allow both real-time and ofﬂine MIDI effects to operate properly and

supply automation to OPT panels.

Level 3

OPT Views provides support for edit views and MIDI processors/panels that require

direct access to client program storage structures. Typically this will allow sophisti-

cated MIDI edit views to be supported.

OPT-compatible plug-in software is connected directly

to an OPT-compatible host application.

OPT Level Implementation for the MOTIF ES6/7/8 Voice Editor

This chart shows the OPT-compatibility of the MOTIF ES6/7/8 Voice Editor.

Certain operations may not work as expected if there is no corresponding function in the host application

(sequencer, etc.). The highest level of implementation for the host application is indicated in the OPT

logo (which appears along with the version information in the application).

Editor

Host

Application

Editor

OPT

OPT levels of the client application

MOTIF ES6/7/8 Voice Editor for operation

Operation support Operation limits

VIEWS (Level3) Yes None

PROCESSORS (Level2) Yes None

PANELS (Level1) Yes Bulk reception

About the OPT 2 Overview

OPT 2 is a plug-in format that enhances OPT Level 1 (Panels)

and adds some convenient functions for use with Total Recall.

In addition to doing Total Recall functions using the Studio

Manager as a host application, you can use Total Recall in a

DAW application (provided it is compatible with Total Recall),

via the Studio Manager.

Plug-in software compatible with

OPT 2 is indirectly connected to

the DAW application compatible

with Total Recall, via the Studio

Manager.

Editor

Host

Application

Editor

OPT2

Studio

Manager

Starting the Voice Editor

After installing the Voice Editor and making the required connection, follow the instructions below

to start the Voice Editor.

Windows

In order to use the Voice Editor with your tone generator, you’ll need to set the MIDI in/out ports. (page 14)

●

Starting Voice Editor from Studio Manager

1. Start Studio Manager as a plug-in within DAW software compatible with Total Recall, or as a

stand-alone application.

2. Start Voice Editor from Studio Manager.

For more information, refer to the installation guide and Studio Manager PDF manual.

●

Starting the Voice Editor in the sequencer software compatible with OPT as a plug-in

software.

The Voice Editor can be used as a plug-in software in any host application compatible with

Open Plug-in Technology (OPT).

Refer to the owner’s manual of the host application (sequencer, etc.) for details on using plug-in

software.

For OPT-compatible software, the Voice Editor settings will be saved along with the song ﬁle.

1. Start the host application.

2. Select “MOTIF ES Voice Editor” in the host application’s “Plug-in” menu.

Macintosh

1. Start the Studio Manager as a plug-in for the DAW compatible with the Total Recall or a

stand-alone application.

2. Start the Voice Editor from the Studio Manager.

For more information, refer to the installation guide and Studio Manager PDF manual.

Menu Bar

The Menu Bar contains various editing and setup functions/commands. Click the desired menu

name to open the appropriate pull-down menu, and choose the function/command you wish to

apply. Those functions/commands which are unavailable are grayed out.

The most commonly-used menus in the Menu Bar are available as buttons in Voice Editor’s toolbar.

File

New

Creates and opens a new Library ﬁle.

Open Library...

This is the same as the “Open” button in the toolbar (page 12).

Save Library

This is the same as the “Save” button in the toolbar (page 13).

Save Library As...

Lets you save the Library ﬁle under a new or different name.

Edit

Copy

Copies the selected voice to the clipboard. If nothing is selected, this item is grayed out.

Paste

Copies the voice from the clipboard to the Voice Editor.

Initialize

Resets the selected voice parameters to the default values. If nothing is selected, this item is

grayed out.

Edit

This is the same as the “Edit Window” button in the toolbar (page 18).

Store...

This is the same as the “Store” button in the toolbar (page 18).

Import...

This is the same as the “Import” button in the toolbar (page 17).

Compare

This is the same as the “Compare” button in the toolbar (page 19).

Setup

Setup...

This is the same as the “Editor Setup” button in the toolbar (page 14).

Transmit Voice Bulk...

This is the same as the “Transmit Bulk” button in the toolbar (page 15).

Receive Voice Bulk...

This is the same as the “Receive Bulk” button in the toolbar (page 16).

Monitor

This is the same as the “Monitor” button in the toolbar (page 18).

Window

Closes the selected window.

Close All

Closes all open windows.

Library

This is the same as the “Library Window” button in the toolbar (page 16).

Common

Displays the Common Edit window for the Voice being edited.

Library Window

When you start Voice Editor, you will ﬁrst see the Library window, which consists of tabs, each

representing a Memory in the tone generation block. Each tab lists all the names, numbers and

categories of voices in the selected Memory. Double-clicking on a voice name in the Library

window opens the Edit window for a voice, letting you edit the voice.

You can save your settings as a Library ﬁle (*.W7E).

Tabs

Click any of these to view the voice list for the corresponding Memory Bank.

Voice list

This area shows all the voices in the selected Memory as a scrollable list. The name, number

and Category of each voice are shown. You can rearrange the voices by dragging-and-

dropping their voice numbers to a new location. You can rename a voice by selecting the voice

name, then clicking on it again to enter a new name.

To select a continuous block of voices, click the number of the ﬁrst voice, hold down the [Shift] key, then

click the last number.

Voice names can consist of up to 10 characters.

Split Bar

If you place the mouse pointer over the line (Split Bar) that divides the Track Parameter Section

from the Block Section, the pointer will change shape into the split tool. With this tool, you can drag

the Split Bar back and forth and change the widths of the two sections.

You can change the size of any of the windows by placing the mouse pointer on the top, bottom, left,

or right border lines of the window, then dragging the line until the window is as big or small as you

like.

Viewing Only the Voice Names

You can view only the names of all voices in the Memory without their “Number” and “Category”

information. To do this, right-click on any part of the voice list and choose “List.” This may be useful

when choosing voices quickly, since you will have less scrolling to do.

n Windows

To switch back to the full Voice Name/Number/Category list, right-click on any part of the voice list

and choose “Details.”

Macintosh

To switch back to the full Voice Name/Number/Category list, click the mouse while holding the [con-

trol] key on any part of the voice list and choose “Details.”

Library Window Toolbar

1 “Open” button

Click this to open the “Open” dialog and select a Library ﬁle to open.

“Open” Dialog

Select the desired Library ﬁle (extension: .W7E) and click [Open]. The contents of the selected ﬁle

is indicated on the Library Window.

n If you are using a Macintosh, the typical Macintosh “Open” dialog will appear.

1 Look in ............................ Click this and choose the folder containing the Voice Editor ﬁles.

2 List box............................Shows the contents of the current folder.

3 File name ........................Shows the name of the ﬁles selected from the List.

4 Files of type ....................Select a ﬁle format from the pull-down menu.

n When using the MOTIF ES Voice Editor, it is possible to open MOTIF ES Voice Editor or MOTIF-

RACK library ﬁles, but the voices will not necessarily sound exactly the same as they sound on the

instrument for which they were created.

n When opening the MOTIF ES Multi Part Editor ﬁle (*.M2E/*.M4E), all User Voice data in the ﬁle will

be read.

5 [Open] button ..................Click this to open the ﬁle selected from the List.

6 [Cancel] button................ Click this to cancel the operation.

1234 5 6789 0A

2 “Save” button

Click this to save the existing Library ﬁle with your new settings. If you are working on a new

ﬁle, this button will open the “Save As” dialog, where you can name and save your settings as a

new Library ﬁle (*.W7E).

n When saving .W7E ﬁles, the ﬁle extension .W8E is attached automatically. These ﬁles need to loaded

directly into MOTIF ES6/7/8 via SmartMedia.

“Save As” Dialog

n If you are using a Macintosh, the typical Macintosh “Save As” dialog will appear.

1 Save in ............................ Click this and choose the folder in which to save the Library ﬁle.

2 List box............................Shows the contents of the folder you wish to save to.

3 File name ........................Specify the name of the Library ﬁle to be saved here.

4 Save as type ................... Click this and choose the ﬁle type.

5 [Save] button...................Click this to save the Library ﬁle with the name speciﬁed in the “File

name” ﬁeld.

6 [Cancel] button................ Click this to quit the dialog without storing.

3 “Editor Setup” button

Click this to open the “Setup” dialog and specify the MIDI Out port settings.

“Setup” Dialog

This is where you set up the Voice Editor to allow the transmission/reception of voice data to/from

your tone generator. Click the [OK] button to apply the settings and quit the dialog. Click the [Can-

cel] button to quit without applying the settings.

1 MIDI In Port.....................Click this and choose the MIDI In port. You can use the Voice Editor to

receive data sent from the device connected to this port.

2 MIDI Out Port ..................Click this and choose the MIDI Out port. You can use the Voice Editor

to control and edit the device connected to this port.

3 MIDI Ch........................... Click this and choose the MIDI Out channel. This is used when moni-

toring sounds using the on-screen keyboard in the Edit Windows.

4 Device No........................Click this and choose the MIDI device number of your tone generator.

5 Dump Interval .................Click this and choose the interval between successive MIDI dumps.

n Setting this to too short of an interval may result in errors when transmitting MIDI data.

6 Dial Mouse Control ......... Changes the operation of the parameter knobs.

When “Rotate” is selected, the parameter values (of the panel

“knobs”) are changed by clicking and dragging the mouse in a circular

direction - in the same way as turning an actual knob.

When “Up/Down or Left/Right” is selected, the parameter values (of

the panel “knobs”) are changed by clicking and dragging the mouse

vertically or horizontally - in the same way as operating a slider.

4 “Transmit” button

Click this to open the “Transmit” dialog to transmit all settings to your tone generator.

“Transmit” Dialog

Voice data can be transmitted in bulk to your tone generator. Click the [Start] button to begin trans-

mitting the data. The progress bar shows how much of the data has been transmitted. Finally, click

the [Close] button to quit the dialog.

1 Transmit Type .................. Indicates the voice data to be transmitted.

Normal User 1 ........................ All Normal User 1 Voices

Normal User 2 ........................ All Normal User 2 Voices

Normal User 1+2 .................... All Normal User 1, 2 Voices

Drum User .............................. All Drum User Voices

Normal User 1+2+Drum ......... All Normal User Voices 1, 2 and Drum User Voices

Plug-in 1 User......................... All Plug-in 1 User Voices

Plug-in 2 User......................... All Plug-in 2 User Voices

Plug-in 3 User......................... All Plug-in 3 User Voices

Plug-in 1+2+3 User ................ All Plug-in 1-3 User Voices

All ........................................... All User Voices (Normal 1, 2, Drum, and Plug-in 1-3)

2 Progress bar ................... Indicates how much of the data has been transmitted.

3 [Start] button ................... Click this to transmit the data.

4 [Close] button.................. Click this to close this dialog.

n The MIDI Device Number has to be set correctly in order to transmit bulk data. For further details,

see page 14.

5 “Receive” button

Click this to open the “Receive” dialog to receive all settings from your tone generator.

6 “Library Window” button

Click this to bring the Library Window back into view. See page 10 for details.

“Receive” Dialog

Voice data can be received in bulk from your tone generator. Select the bulk voice data you wish to

receive, then click the [Start] button. The progress bar shows how much of the data has been

received. Finally, click the [Close] button to quit the dialog.

1 Receive Type................... Click this and choose the Voice data (internal/external/all) to receive.