Zanussi ZKT652DX Manuel utilisateur

Marque: Zanussi

Modèle: ZKT652DX

Catégorie: Plaques de cuisson

Taper: Manuel utilisateur

User

information

Informations

pour les

utilisateurs

Induction

hob

Table de

cuisson à

induction

ZKT 652 DX

Contents

Operating Instructions- - - - - - - - - - - - - - - 3

Safety instructions - - - - - - - - - - - - - - - - - 3

Description of the Appliance - - - - - - - - - - 4

Operating the appliance - - - - - - - - - - - - - 6

Tips on Cooking and Frying- - - - - - - - - - - 12

Cleaning and Care - - - - - - - - - - - - - - - - - 15

What to do if … - - - - - - - - - - - - - - - - - - - 16

Disposal - - - - - - - - - - - - - - - - - - - - - - - - 19

Installation Instructions- - - - - - - - - - - - - - 20

Service - - - - - - - - - - - - - - - - - - - - - - - - - 21

Assembly - - - - - - - - - - - - - - - - - - - - - - - 44

Rating Plate- - - - - - - - - - - - - - - - - - - - - - 47

Thank you for selecting our appliance

We wish you lots of enjoyment with your new appli-

ance and we hope that you will consider our brand

again when purchasing household appliances.

Please read this user manual carefully and keep it

throughout the product life cycle as a reference doc-

ument. The user manual should be passed on to any

future owner of the appliance.

The following symbols are used in this user information:

Warning! This must be read! Important advice for the safety of persons and information on

avoiding damage to the appliance

3 General information and advice

2 Information on environmental protection

z Dangerous voltage

Operating Instructions

1 Safety instructions

Please comply with these instructions. If you do

not, any damage resulting is not covered by the

warranty.

Correct use

• This appliance is not intended for use by chil-

dren or other persons whose physical, sen-

sory or mental capabilities or lack of

experience and knowledge prevents them

from using the appliance safely without su-

pervision or instruction by a responsible per-

son to ensure that they can use the

appliance safely.

• Do not leave the appliance unattended dur-

ing operation.

• This appliance should be used only for nor-

mal domestic cooking and frying of food.

• The appliance must not be used as a work

surface or as a storage surface.

• Additions or modifications to the appliance

are not permitted.

• Do not place or store flammable liquids, high-

ly inflammable materials or fusible objects

(e.g. plastic film, plastic, aluminium) on or

near the appliance.

Children’s safety

• Small children must be kept away from the

appliance.

• Only let bigger children work on the appli-

ance under supervision.

• To avoid small children and pets unintention-

ally switching the appliance on, we recom-

mend activation of the child safety device.

General safety

• The appliance may only be installed and

connected by trained, registered service en-

gineers.

• Built-in appliances may only be used after

they have built in to suitable built-in units and

work surfaces that meet standards.

• In the event of faults with the appliance or

damage to the glass ceramic (cracks,

scratches or splits), the appliance must be

switched off and disconnected from the elec-

trical supply, to prevent the possibility of an

electric shock.

• Repairs to the appliance must only be carried

out by trained registered service engineers.

Safety during use

• Remove stickers and film from the glass ce-

ramic.

• There is the risk of burns from the appliance

if used carelessly.

• Cables from electrical appliances must not

touch the hot surface of the appliance or hot

cookware.

• Overheated fats and oils can ignite very

quickly. Warning!Fire hazard!

• Switch the cooking zones off after each use.

• Users with implanted pacemakers should

keep their upper body at least 30 cm from in-

duction cooking zones that are switched on.

• Risk of burns! Do not place objects made of

metal, such as knives, forks, spoons and

saucepan lids on the cooking surface, as

they can get hot.

Safety when cleaning

• For cleaning, the appliance must be switched

off and cooled down.

• For safety reasons, the cleaning of the appli-

ance with steam jet or high-pressure clean-

ing equipment is not permitted.

How to avoid damage to the appli-

ance

• The glass ceramic can be damaged by ob-

jects falling onto it.

• The edge of the glass ceramic can be dam-

aged by being knocked by the cookware.

• Cookware made of cast iron, cast aluminium

or with damaged bottoms can scratch the

glass ceramic if pushed across the surface.

• Objects that melt and things that boil over

can burn onto the glass ceramic and should

be removed straightaway.

• Do not use the cooking zones with empty

cookware or without cookware.

• To avoid damaging cookware and glass ce-

ramics, do not allow saucepans or frying

pans to boil dry.

• The ventilation gap of 5mm between the

worktop and front of the unit underneath it

must not be covered.

Description of the Appliance

Cooking surface layout

Induction cooking zone 2200 W

with power function 3700 W

Induction cooking zone 1800 W

Induction cooking zone 1400 W

Control panel Induction cooking zone 1800 W

with power function 2800 W

Control panel layout

Touch Control sensor fields

The appliance is operated using Touch Control

sensor fields. Functions are controlled by

touching sensor fields and confirmed by dis-

plays and acoustic signals.

Touch the sensor fields from above, without

covering other sensor fields.

On/Off

with power indicator

Heat setting selection

Lock

Timer display

Power function

Cooking zone indicators

Timer function

Display

Timer

Sensor field Function

On / Off To switch the appliance on and off

Increase settings Increasing heat setting/time

Decrease settings Decreasing heat setting/time

Timer Timer selection

Lock Locking/unlocking the control panel

Power Switching the power function on and off

Displays

Residual heat indicator

1 Warning! Risk of burns from residual

heat. After being switched off, the cooking

zones need some time to cool down. Look

at the residual heat indicator

3 Residual heat can be used for melting and

keeping food warm.

The induction cooking zones create the

heat required for cooking directly in the base of

the cookware. The glass ceramic is merely

heated by the residual heat of the cookware.

The cooling fan switches itself on and off

depending upon the temperature of the elec-

tronics.

Operating the appliance

3 Use the induction cooking zones with suit-

able cookware.

Switching the appliance on and off

After switching on, within approx.

10 seconds a heat setting or a function

must be set, otherwise the appliance auto-

matically switches itself off.

Display Description

Cooking zone is switched off

- Heat settings Heat setting is set

Fault Malfunction has occurred

Pan detection Cookware is unsuitable or too small or no cook-

ware has been placed on the cooking zone

Residual heat Cooking zone is still hot

Child safety device Lock/child safety device is engaged

Power Power function is switched on

Automatic switch off Switch off is active.

Control panel Display Pilot light

To switch on Touch for 1 second / lights up

To switch off Touch for 1 second / none goes out

Setting the heat setting

Locking/unlocking the control

panel

The control panel, with the exception of the

“On/Off” sensor field, can be locked at any time

in order to prevent the settings being changed

e.g. by wiping over the panel with a cloth.

3 When you switch the appliance off, the

locking function is automatically switched

off.

Using the child safety device

The child safety device prevents unintentional

use of the appliance.

Setting the child safety device

Control panel Display

Increase Touch to /

Decrease Touch to

Switch off Touch and at the same time

Control panel Display

Switch on Touch (for 5 seconds)

Switch off To uch previously set heat setting

Step Control panel Display/Signal

1. Switch on the appliance

(Do not set a heat setting)

2. Touch until the signal sounds Acoustic signal

3. Touch

Appliance switches off. The child safety device is engaged.

Overriding the child safety device

The child safety device can be released in this

way for a single cooking session; it remains ac-

tivated afterwards.

Releasing the child safety device

Switching the power function

on and off

The power function makes more power

available to the induction cooking zones, e.g. to

bring a large quantity of water to the boil quickly.

The power function is activated for 10 minutes

at most. After that the induction cooking zone

automatically switches back to heat setting 9.

3 If the power function has ended, the cook-

ing zones automatically switch back to the

heat setting set previously.

Step Control panel Display/Signal

1. Switch on the appliance

2. Touch and at the same time / acoustic signal

Until the appliance is next switched off, it can be used as normal.

Step Control panel Display/Signal

1. Switch on the appliance

2. Touch until the signal sounds Acoustic signal

3. Touch

Appliance switches off. The child safety device is released.

Control panel Display

Switch on Touch

Switch off To uch

Touch

Power Management

The cooking zones of the cooking surface have

a maximum power.

The maximum power is reached when the heat

setting 9 has been set for all cooking zones.

Two cooking zones generate a pair (see figure)

and therefore, the power management shares

the maximum available power between these

cooking zones.

When the power function is selected for one

cooking zone, the power management makes

the additional power for this cooking zone avail-

able by reducing the power of the correspond-

ing other cooking zone.

Example: the heat setting 9 is selected on one

cooking zone. The power function is switched

on for the corresponding cooking zone. The

power function is carried out but the heat set-

ting 9 of one of the cooking zones and the pow-

er function for the other cooking zone of the pair

exceed the maximum power for both at the

same time. For this purpose, the power man-

agement reduces the power of the cooking

zone that switched on first from 9 to example 5

and the display of this cooking zone changes

between 9 and 5 and then stays at the current

possible maximum 5. (If the display changes

between 9 and 5 or 9 and 3 or another value

depends on the type of appliance and the size

of the cooking zone.).

Using the timer

All cooking zones can use each use one of the

two timer functions at the same time.

3 If a cooking zone is switched off, the timer

function set is also switched off.

3 If a heat setting is set on this cooking zone

in addition to a countdown timer, the cook-

ing zone is switched off after the time set

has elapsed.

Function Condition Outcome after the

time has elapsed

Automatic cut-out a heat setting is set acoustic signal

00 flashes

Cooking zone switches off

Countdown timer cooking zones not in use acoustic signal

00 flashes

Selecting a cooking zone

3 The heat setting indicator of the selected

cooking zone goes out, as long as the tim-

er time can be set.

3 If the pilot light is flashing more slowly, the

heat setting indicator appears again and

the heat setting can be re-set or modified.

3 If other timer functions are set, after a few

seconds the shortest remaining time of all

the timer functions is displayed and the

corresponding pilot light flashes.

Setting time

Step Control panel Display

1. Touch once Pilot light of the first cooking zone

flashes

2. Touch once Pilot light of the second cooking

zone flashes

3. Touch once Pilot light of the third cooking zone

flashes

4. Touch once Pilot light of the fourth cooking zone

flashes

Step Control panel Grill setting

1. Selecting cooking zone Telltale of cooking zone selected flashes

2. Touch or from the

selected cooking zone

01 to 99 minutes

3. Touch or from the se-

lected cooking zone for more

than 4 seconds

... 05...10...15... 20 or... 95... 90... 85...

80... (5-minute steps for easy setting)

After a few seconds the power indicator flashes more slowly.

The time is set.

The time counts down.

Switching off the Timer function

Changing the time

Displaying the time remaining for a cooking zone

Switching off the acoustic signal

Step Control panel Display

1. Select a cooking zone Pilot light of the selected cooking zone flashes more

quickly.

Remaining time is displayed

2. Touch for the cooking

zone selected

The remaining time counts down to 00.

The pilot light goes out.

The Timer function for the selected cooking zone is switched off.

Step Control panel field Display

1. Select cooking zone Pilot light of the cooking zone selected flashes fast-

The time remaining is displayed

2. Touch or for the cook-

ing zone selected

01 to 99 minutes

After a few seconds the pilot light flashes more slowly.

The time is set.

The time counts down.

Step Control panel field Display

1. Select cooking zone Pilot light of the cooking zone selected flashes fast-

The time remaining is displayed

After a few seconds the pilot light flashes more slowly.

Step Control panel field Acoustic signal

1. Touch Acoustic signal to acknowledge.

Acoustic signal stops.

Automatic cut-out

Cooking surface

• If after switching on the cooking surface, a

heat setting is not set for a cooking zone

within approx. 10 seconds, the cooking sur-

face automatically switches itself off.

• If all cooking zones are switched off, the

cooking surface automatically switches itself

off after approx. 10 seconds.

Induction cooking zones

• If cookware that is not suitable is used,

lights up in the display and after 2 minutes

the indicator for the cooking zone switches it-

self off.

• If one of the cooking zones is not switched off

after a certain time, or if the heat setting is

not modified, the relevant cooking zone

switches off automatically. is displayed.

Before being used again, the cooking zone

must be set to .

Tips on Cooking and Frying

3 Information on acrylamides

According to the latest scientific knowl-

edge, intensive browning of food, especial-

ly in products containing starch, can

constitute a health risk due to acrylamides.

Therefore we recommend cooking at the

lowest possible temperatures and not

browning foods too much.

Heat setting Switches off after

1 - 2 6 hours

3 - 4 5 hours

5 4 hours

6 - 9 1.5 hours

Cookware for induction cooking zones

Cookware material

3 * Cookware for induction cooking zones is

labelled as suitable by the manufacturer.

Suitability test

Cookware is suitable for induction cooking, if …

• ... a little water on an induction cooking zone

set to heat setting 9 is heated very quickly.

• ... a magnet sticks to the bottom of the cook-

ware.

Cookware base

The bottom of the cookware should be as thick

and flat as possible.

Pan size

Up to a certain limit, induction cooking zones

adapt themselves to the size of the bottom of

the cookware automatically. However, depend-

ing on the cooking zone size, the magnetic part

of the bottom of the cookware must have a min-

imum diameter.

3 The cookware must be placed centrally on

the cooking zone.

Cookware material suitable

Cast iron +

Steel, enamelled steel +

Stainless steel +*

Multi-layer pan bottom +*

Aluminium, copper, brass -

Glass, ceramic, porcelain -

Diameter of cooking zone

[mm]

Minimum diameter of dish base

[mm]

210 180

180 145

145 120

Tips on energy saving

Place cookware on the cooking zone be-

fore it is switched on.

2 If possible, always place a lid on the cook-

ware.

Examples of cooking applications

The information in the table is for guidance on-

ly.

The power function is suitable for heating large

quantities of liquid.

Heat

setting

Cooking-

process

suitable for Cooking time Hints

0 Residual heat, Off position

Keeping

food warm

To keep cooked foods warm as necessary Cover

1-2

Melting

Hollandaise sauce,

to melt butter, chocolate, gelatine

5-25 mins. Stir occasionally

Solidifying Fluffy omelettes, baked eggs 10-40 mins. Cook with lid on

2-3

Simmer-

ing on low

heat

To simmer rice and milk-based

dishes

To heat up ready meals

25-50 mins.

Add minimum twice as much

liquid as rice, stir milk dishes

some times

3-4

Steaming

Braising

To steam vegetables, fish

to braise meat

20-45 mins.

With vegetables add only

some liquid (some table-

spoons)

4-5 Boiling

To steam potatoes 20-60 mins.

Use only some liquid, e.g.:

max.

¼ l water for

750 g potatoes

To cook larger quantities of food,

stews and soups

60-150 mins.

3 l liquid maximum plus ingre-

dients

6-7

Gentle

Frying

To fry escalopes, veal cordon bleu,

cutlets, rissoles, sausages, liver,

roux, eggs, pancakes, doughnuts

Steady frying Turn occasionally

7-8

Heavy

Frying

Hash browns, loin steaks, steaks,

Flädle (pancakes for garnishing

soup)

5-15 mins.

per pan

Turn occasionally

Boiling

Searing

Deep

frying

To boil large quantities of water, to cook pasta,

to sear meat (goulash, pot roast), deep frying chips

Cleaning and Care

1 Take care! Risk of burns from residual

heat.

1 Warning! Sharp objects and abrasive

cleaning materials will damage the appli-

ance. Clean with water and washing up liq-

uid.

1 Warning! Residues from cleaning

agents will damage the appliance. Re-

move residues with water and washing up

liquid.

Cleaning the appliance after each

use

1.Wipe the appliance with a damp cloth and a

little washing up liquid.

2.Rub the appliance dry using a clean cloth.

Removing deposits

1.Place a scraper on the glass ceramic surface

at an angle.

2.Remove residues by sliding the blade over

the surface.

3.Wipe the appliance with a damp cloth and a

little washing up liquid.

4.Rub the appliance dry using a clean cloth.

*Scrapers and cleaners for glass ceramic and stainless

steel can be purchased in specialized shops

3 Remove stubborn residues with a cleaner

for glass ceramic or stainless steel.

3 Scratches or dark stains on the glass ce-

ramic that cannot be removed do not how-

ever affect the functioning of the appliance.

Remove

Type of dirt

immedi-

ately

when the appliance has

cooled down

using

sugar, food containing sugar yes ---

a scraper*

plastics, tin foil yes ---

limescale and water rings --- yes

cleaner for glass ceramic

or stainless steel*

fat splashes --- yes

shiny metallic discolouration --- yes

What to do if …

Problem Possible cause Remedy

The appliance cannot be switched

on or is not operating

More than 10 seconds have passed

since the appliance was switched on

Switch the appliance on again.

The lock is switched on Switch off the lock (See the section

“Locking/unlocking the control pan-

el”)

The child safety device is switched

Deactivate child safety device (See

the section “Child safety device”)

Several sensor fields were touched

at the same time

Only touch one sensor field

Automatic switch off has been trig-

gered

Remove any objects (pan, cloths,

etc.) that are lying on the control

panel. Switch the appliance on

again

Dirty control panel The sensor fields must be dry and

fat-free.

The cooking zones automatically re-

duce the cooking level to

The sensor fields are partly covered

by a damp cloth or with liquid

Remove the cloth or the liquid.

Reset the cooking level required.

The residual heat indicator is not

displaying anything

The cooking zone was only on for a

short time and is therefore not hot

If the cooking zone is supposed to

be hot, call the Customer Service

Department.

acoustic signal sounds, appliance

switches off

One or more sensor fields have

been covered for longer than 10

seconds

Uncover sensor field

A signal sounds when the appliance

is switched off

The control panel is partially or com-

pletely covered by objects

Remove the objects

The appliance switches off, a signal

sounds repeatedly

The control panel was covered too

long

The appliance will be fully functional

after about 50 seconds

The sensor fields cannot be operat-

A single sensor field was covered

for a short period

The sensor field is automatically re-

leased after about 10 seconds

Display is switching between two

heat settings

Power management is reducing the

power of this cooking zone

See the section “Switching the pow-

er function on and off”

lights up Unsuitable cookware Use suitable cookware

No cookware on the cooking zone Place cookware on the cooking

zone

The diameter of the bottom of the

cookware is too small for the cook-

ing zone

Move onto a smaller cooking zone

Use suitable cookware

If you are unable to remedy the

problem by following the above

suggestions, please contact your

local Service Force Centre.

1 Warning! Repairs to the appliance are

only to be carried out by qualified service

engineers. Considerable danger to the

user may result from improper repairs.

3 If the appliance has been operated incor-

rectly, the engineer's visit will be chargea-

ble, even during the warranty period.

lights up Automatic switch-off has been trig-

gered

Switch off the cooking zone. Switch

the cooking zone on again

and number are displayed Electronics fault Disconnect the appliance from the

electrical supply for a few minutes

(Take the fuse out of the house’s wir-

ing system)

If after switching on again, is dis-

played again, call the customer

service department

Problem Possible cause Remedy

Operating noises

Depending on the material and the processing

of the base, the following noises may occur

when using induction cooking zones.

• Cracking noise (1)

when using cookware made of different ma-

terials (Sandwich construction)

• Whistling (1)

when using an individual cooking zone or

several cooking zones with high powers

when the cookware is made of different ma-

terials (Sandwich construction)

• Humming (2)

can occur at high power levels

• Clicking (2)

during electric switching processes

• Hissing, buzzing (3)

The device is fitted with a fan for cooling the

electrics. A whiring noise can be heard when

operating the fan which may deviate depend-

ing on the performance and may continue for

a while after the appliance is switched off.

The noises described are normal

and do not refer to any defects.

Disposal

2 Packaging material

The packaging materials are environmen-

tally friendly and can be recycled. The

plastic components are identified by mark-

ings, e.g. >PE<, >PS<, etc. Please dis-

pose of the packaging materials in the

appropriate container at the community

waste disposal facilities.

2 Old appliance

The symbol

W on the product or on its

packaging indicates that this product may

not be treated as household waste. In-

stead it shall be handed over to the appli-

cable collection point for the recycling of

electrical and electronic equipment. By en-

suring this product is disposed of correctly,

you will help prevent potential negative

consequences for the environment and hu-

man health, which could otherwise be

caused by inappropriate waste handling of

this product. For more detailed information

about recycling of this product, please con-

tact your local city office, your household

waste disposal service or the shop where

you purchased the product.

Installation Instructions

1 Safety instructions

Warning! This must be read!

The laws, ordinances, directives and standards

in force in the country of use are to be followed

(safety regulations, proper recycling in accord-

ance with the regulations, etc.)

Installation may only be carried out by a quali-

fied electrician.

The minimum distances to other appliances

and units are to be observed.

Anti-shock protection must be provided by the

installation, for example drawers may only be

installed with a protective floor directly under-

neath the appliance.

The cut surfaces of the worktop are to be pro-

tected against moisture using a suitable sealant.

The sealant seals the appliance to the work top

with no gap.

Do not use silicon sealant between the appli-

ance and the work top.

When building in, protect the underside of the

appliance from steam and moisture, e.g. from a

dishwasher or oven.

Avoid installing the appliance next to doors and

under windows. Otherwise hot cookware may

be knocked off the rings when doors and win-

dows are opened.

z Risk of injury from electrical

current.

• The electrical mains terminal is live.

• Make electrical mains terminal free of volt-

age.

• Follow connection schematic.

• Observe electrical safety rules.

• Ensure anti-shock protection by installing

correctly.

• The appliance must be connected to the

electrical supply by a qualified electrician.

z Risk of injury from electrical

current.

• Loose and inappropriate plug and socket

connections can make the terminal overheat.

• Have the clamping connections correctly in-

stalled by a qualified electrician.

• Use strain relief clamp on cable.

• In the event of single-phase or two-phase

connection, the appropriate mains cable of

type H05BB-F Tmax 90°C(or higher) or an

equivalent type must be used.

• If this appliance’s mains cable is damaged, it

must be replaced by a special cable (type

H05BB-F Tmax 90°C; or higher) or an equiv-

alent type. The latter is available from the

Customer Care Department.

A device must be provided in the electrical in-

stallation which allows the appliance to be dis-

connected from the mains at all poles with a

contact opening width of at least 3 mm.

Suitable isolation devices include line protect-

ing cut-outs, fuses (screw type fuses are to be

removed from the holder), earth leakage trips

and contactors.

La page charge ...

Zanussi ZKT652DX Manuel utilisateur

Marque: Zanussi

Modèle: ZKT652DX

Catégorie: Plaques de cuisson

Taper: Manuel utilisateur

Télécharger le PDF

rapport

dans d''autres langues

English: Zanussi ZKT652DX User manual

Zanussi ZKT652DX Manuel utilisateur

Zanussi ZKT652DX Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents