Samsung PN50C550 Le manuel du propriétaire

Catégorie
Téléviseurs à écran plasma
Taper
Le manuel du propriétaire

Ce manuel convient également à

© 2010 Samsung Electronics Co., Ltd. All rights reserved.
BN68-02580B-02
Plasma TV
user manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service, please register
your product at
www.samsung.com/register
Model _____________ Serial No. _____________
Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.
Comuníquese con SAMSUNG WORLDWIDE
Si desea formular alguna pregunta o comentario en relación con los productos de Samsung, comuníquese con el centro de
atención al cliente de SAMSUNG.
Country
Customer Care Center
Web Site Address
CANADA 1-800-SAMSUNG (726-7864) www.samsung.com Samsung Electronics Canada Inc., Customer Service
55 Standish Court Mississauga, Ontario L5R 4B2
Canada
MEXICO 01-800-SAMSUNG (726-7864) www.samsung.com C.P 11570 AV. Presidente Masaryk No.111, Int. 701
Col. Chapultepec Morales, Delegacion Miguel Hidalgo
Mexico D.F
U.S.A 1-800-SAMSUNG (726-7864) www.samsung.com Samsung Electronics America, Inc. 105 Challenger
Road Ridgeeld Park, NJ 07660-0511
[PC550]BN68-02580B-Eng.indb 1 2010-03-05 오후 7:20:16
2
English
Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance.
Product design and specifications may be changed without notice.
Important Warranty Information Regarding Television Format Viewing
See the warranty card for more information on warranty terms.
Wide screen format PDP Displays (16:9, the aspect ratio of the screen width to height) are primarily designed to view wide screen format full-motion video.
The images displayed on them should primarily be in the wide screen 16:9 ratio format, or expanded to fill the screen if your model offers this feature and
the images are constantly moving. Displaying stationary graphics and images on screen, such as the dark side-bars on no expanded standard format
television video and programming, should be limited to no more than 5% of the total television viewing per week.
Additionally, viewing other stationary images and text such as stock market reports, video game displays, station logos, web sites or computer graphics
and patterns, should be limited as described above for all televisions. Displaying stationary images that exceed the above guidelines can cause uneven
aging of PDP Displays that leave subtle, but permanent burned-in ghost images in the PDP picture. To avoid this, vary the programming and images, and
primarily display full screen moving images, not stationary patterns or dark bars.
On PDP models that offer picture sizing features, use these controls to view different formats as a full screen picture.
Be careful in the selection and duration of television formats used for viewing. Uneven PDP aging as a result of format selection and use, as well as burned
in images, are not covered by your Samsung limited warranty.
SAMSUNG ELECTRONICS NORTH AMERICAN LIMITED WARRANTY STATEMENT
Subject to the requirements, conditions, exclusions and limitations of the original Limited Warranty supplied with Samsung Electronics (SAMSUNG)
products, and the requirements, conditions, exclusions and limitations contained herein, SAMSUNG will additionally provide Warranty Repair Service
in the United States on SAMSUNG products purchased in Canada, and in Canada on SAMSUNG products purchased in the United States, for the
warranty period originally specified, and to the Original Purchaser only.
The above described warranty repairs must be performed by a SAMSUNG Authorized Service Center. Along with this Statement, the Original Limited
Warranty Statement and a dated Bill of Sale as Proof of Purchase must be presented to the Service Center. Transportation to and from the Service
Center is the responsibility of the purchaser. Conditions covered are limited only to manufacturing defects in material or workmanship, and only those
encountered in normal use of the product.
Excluded, but not limited to, are any originally specified provisions for, in-home or on-site services, minimum or maximum repair times, exchanges or
replacements, accessories, options, upgrades, or consumables.
For the location of a SAMSUNG Authorized Service Center, please call toll-free:
– In the United States: 1-800-SAMSUNG (1-800-726-7864)
– In Canada: 1-800-SAMSUNG
User Instructions
Screen Image retention
Do not display a still image (such as on a video game) on the plasma display panel for more than several minutes as it can cause screen image
retention. This image retention is also known as “screen burn”. To avoid such image retention, refer to page 14 of this manual to reduce the degree of
brightness and contrast of the screen when displaying a still image.
Heat on the top of the Plasma TV
The top side of the product may be hot after long periods of use as heat dissipates from the panel through the vent hole in the upper part of the
product.
This is normal and does not indicate any defect or operation failure of the product.
However, children should be prevented from touching the upper part of the product.
The product is making a “cracking” noise.
A “cracking” noise may occur when the product contracts or expands due to a change in the surrounding environment such as temperature or
humidity. This is normal and not a defect of the unit.
Cell Defects
The PDP uses a panel consisting of 2,360,000(HD-level) to 6,221,000(FHD-level) pixels which require sophisticated technology to produce. However,
there may be a few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.
Avoid operating the TV at temperatures below 41°F (5°C)
A still image displayed too long may cause permanent damage to the PDP Panel.
Watching the Plasma TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right and center of
the screen caused by the difference of light emission on the screen. Playing a DVD or a game console may cause similar effects to
the screen.
Damages caused by the above effect are not covered by the Warranty.
After-images on the Screen.
Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images.
To prevent this effect, reduce the “brightness” and “contrast” when displaying still images for a long time.
Warranty
Warranty does not cover any damage caused by image retention.
Burn-in is not covered by the warranty.
[PC550]BN68-02580B-Eng.indb 2 2010-03-05 오후 7:20:17
3
Contents
ENGLISH
English
Getting Started
y List of Features ......................................................... 4
y Accessories .............................................................. 4
y Install the Stand ........................................................ 5
y Viewing the Control Panel ......................................... 6
y Viewing the Remote Control ...................................... 7
y Connecting to an Antenna ........................................ 9
y Plug & Play (Initial Setup) ........................................... 9
Connections
y Connecting to an AV Device .................................... 10
y Connecting to an Audio Device ............................... 11
y Connecting to a PC ................................................ 12
y Changing the Input Source ..................................... 14
Basic Features
y How to Navigate Menus .......................................... 14
y Channel Menu ........................................................ 15
Seeing Channels 15
Using Favorite Channels 15
Memorizing channels 15
Editing Channels 16
Other Features 16
y Picture Menu .......................................................... 17
Changing the Preset Picture Mode 17
Adjusting Picture Settings 17
Economical Solutions 17
Changing the Picture Options 18
Setting up the TV with Your PC 20
y Sound Menu ........................................................... 21
Changing the Preset Sound Mode 21
Adjusting Sound Settings 21
Sound Settings 21
y Setup Menu ............................................................ 22
Setting the Time 22
Using the Sleep Timer 22
Setting the On / Off Timer 22
Locking Programs 23
Other Features 24
Picture In Picture (PIP) 26
y Support Menu ......................................................... 26
Advanced Features
y Network Connection ............................................... 28
Connecting to a Wired Network 28
Connecting to a Wireless Network 30
y Media Play .............................................................. 33
Connecting a USB Device 33
Connecting to your PC through a network 33
Screen Display 35
Playing Multiple Files 38
Media Play - Additional Functions 38
y Anynet+ .................................................................. 40
Setting Up Anynet+ 41
Switching between Anynet+ Devices 41
Recording 42
Listening through a Receiver 42
Troubleshooting for Anynet+ 43
y AllShare .................................................................. 44
About AllShare 44
Setting Up AllShare 44
Other Information
y Installing the Wall Mount ......................................... 46
y Assembling the Cables ........................................... 47
y Securing the Installation Space ............................... 47
y Securing the TV to the Wall ..................................... 48
y Troubleshooting ...................................................... 49
y Specifications ......................................................... 52
y License ................................................................... 52
y Dimensions ............................................................. 53
y Index ...................................................................... 54
Check the Symbol!
TOOLS
This function can be used by pressing the
TOOLS button on the remote control.
Note
Indicates additional information.
Step by Step Guide
Check here for instructions on how to open
the relevant submenu within the OSD (on
screen display).
[PC550]BN68-02580B-Eng.indb 3 2010-03-05 오후 7:20:18
4
English
Getting Started
List of Features
y Excellent Digital Interface & Networking never put a space before punctuation: With a built-in HD digital tuner,
nonsubscription HD broadcasts can be viewed without a cable box / STB (Set-Top-Box) satellite receiver.
y Media Play: Allows you to play music files, pictures, and movies saved on a USB device (p. 33).
y AllShare: AllShare connects your TV and compatible Samsung mobile phones/devices through a network (p. 44).
y Self Diagnosis: You can check to make sure picture and sound operate normally (p. 26).
Accessories
Please make sure the following items are included with your PDP TV. If any items are missing, contact your dealer.
The items’ colors and shapes may vary depending on the models.
y Remote Control (PN50C540, PN58540: BN59-00996A)
(PN50C550, PN50C590, PN58C550, PN58C590: BN59-01041A)
& Batteries (AAA x 2)
y Owner’s Instructions
y Warranty Card / Safety Guide / Quick Setup Guide
y Cleaning Cloth (BN63-01798B)
y Power Cord
M4 X L16
Blanking Bracket
(BN63-06475A: PN50C540, PN50C550, PN50C590) /
(BN63-06476A: PN58C540, PN58C550, PN58C590 )
TV-Holder & Screw (M4)
(BN68-01788A)
Cable Tie
(BN61-05596A)
Ferrite Core for Power Cord (2EA)
(3301-002049)
Ferrite Core for Power Cord: The ferrite cores are used to shield the cables from interference.
When connecting a cable, open the ferrite core and clip it around the cable near the plug as
shown in the figure.
x
A (Distance between the ferrite core and one end of the cord put into the TV set): below
50mm
x
B (Distance between the ferrite core and the other end of the cord put into the outlet): below
20mm
A
B
[PC550]BN68-02580B-Eng.indb 4 2010-03-05 오후 7:20:20
5
01 Getting Started
English
or
Input Cables (Sold Separately)
HDMI HDMI-DVI Component Composite (AV) Coaxial (RF) VGA
Install the Stand
50 inches model only
See separate guide for installing the stand.
Stand (1EA) Guide Stand (1EA) Screws (9EA)
Follow the steps below to connect the TV to the stand.
1. Connect the Guide Stand to the Stand using five screws (M4 X L12) as shown.
1
2
2. With your TV upright, connect the TV to the Stand as
shown.
3. Fasten two screws (M4 X L12) at position 1, and then
fasten the screws (M4 X L12) at position 2.
NOTE
x
Make sure to distinguish between the front and back of the Stand and Guide Stand when assembling them.
x
Make sure that at least two persons lift and move the PDP TV.
x
Stand the product up and fasten the screws. If you fasten the screws with the PDP TV placed down, it may lean to
one side.
(M4 X L12)
Top view
Front
Rear
Rear
Screws (M4 X L12)
Screws (M4 X L12)
Guide Stand
Stand
[PC550]BN68-02580B-Eng.indb 5 2010-03-05 오후 7:20:22
6
Getting Started
English
Viewing the Control Panel
The product color and shape may vary depending on the model.
SOURCE
Toggles between all the available input sources. In the on-screen menu, use this
button as you would use the ENTER
button on the remote control.
MENU Displays an on-screen menu, the OSD (on screen display) of your TV’s features.
Adjusts the volume. In the OSD, use the
buttons as you would use the
and buttons on the remote control.
Changes the channels. In the OSD, use the
buttons as you would use the
and buttons on the remote control.
Power Indicator Blinks and turns off when the power is on and lights up in standby mode.
(Power)
Turns the TV on or off.
Remote control sensor Aim the remote control towards this spot on the TV.
Standby mode
Do not leave your TV in standby mode for long periods of time (when you are away on a holiday, for example). A small amount
of electric power is still consumed even when the power button is turned off. It is best to unplug the power cord.
Remote control sensor
Power Indicator
Speakers
[PC550]BN68-02580B-Eng.indb 6 2010-03-05 오후 7:20:22
7
01 Getting Started
English
Viewing the Remote Control
This is a special remote control for the visually impaired and has Braille points on the Power, Channel and Volume
buttons.
PN50C550 / PN50C590 / PN58C550 / PN58C590
FAV.CH
TOOLS
POWER
SOURCE
ON/OFF
PRE-CH
MENU
RETURN
S.MODE
MEDIA.P
CH LIST
P.MODE
P.SIZE
CC
SLEEP
A B C D
MTS
EXIT
INFO
Turns the TV on and off .
Returns to the previous channel.
Cuts off the sound temporarily.
Changes channels.
Displays Favorite Channel Lists on the
screen (p. 15).
Displays the channel list on the screen
(p. 15).
Displays information on the TV screen.
Selects the on-screen menu items and
changes the values seen on the menu.
Exits the menu.
S.MODE: Press to select the sound
mode (p. 21).
SLEEP: Automatically shuts off the TV
at a preset time. (p. 22).
MTS: Press to choose stereo, mono
or Separate Audio Program (SAP
broadcast) (p. 21).
P.MODE: Press to select the picture
mode (p. 17).
P.SIZE: Selects the picture size (p. 19).
CC: Controls the caption decoder (p.
24).
Displays and selects the available video
sources (p. 14).
Press to directly access channels.
Press to select additional channels
(digital) being broadcasted by the
same station. For example, to select
channel “54-3”, press “54”, then press
“-” and “3”.
Adjusts the volume.
Brings up the OSD.
Displays Media Play (USB) (p. 33).
Quickly select frequently used functions.
Returns to the previous menu.
Buttons used in the Channel list, Media
Play (USB) menu, etc.
Use these buttons in Media Play (USB)
and Anynet+ (HDMI-CEC) modes
(p. 33, 40). (
: Controls recording
for Samsung recorders that have the
Anynet+ feature
Turns the remote control light on or
off. When on, the buttons become
illuminated for a moment when pressed.
(Using the remote control with this button
set to on will reduce the battery usage
time.)
[PC550]BN68-02580B-Eng.indb 7 2010-03-05 오후 7:20:23
8
Getting Started
English
Installing batteries (Battery size: AAA)
NOTE
x
Use the remote control within 23 feet from the TV.
x
Bright light may affect the performance of the remote
control. Avoid use when nearby fluorescent lights or neon
signs.
x
The color and shape may vary depending on the model.
PN50C540 / PN58C540
CH LIST
MUTE
POWER
PRE-CH
HDMI
MENU
TOOLS
RETURN
MEDIA.P
FAV.CH
S.MODE
P.MODE P.SIZE
CC
SLEEP
A B C D
MTS
EXIT
INFO
SOURCE
Turns the TV on and off.
Returns to the previous channel.
Cuts off the sound temporarily.
Changes channels.
Displays and selects the available video
sources (p. 14).
Selects the HDMI mode directly.
Displays Favorite Channel Lists on the
screen (p. 15).
Displays the channel list on the screen
(p. 15).
Displays information on the TV screen.
Selects the on-screen menu items and
changes the values seen on the menu.
Exits the menu.
S.MODE: Press to select the sound
mode (p. 21).
SLEEP: Automatically shuts off the TV at
a preset time. (p. 22).
MTS: Press to choose stereo, mono
or Separate Audio Program (SAP
broadcast) (p. 21).
P.MODE: Press to select the picture
mode (p. 17).
P.SIZE: Selects the picture size (p. 19).
CC: Controls the caption decoder (p. 24).
Press to directly access channels.
Press to select additional channels
(digital) being broadcasted by the same
station. For example, to select channel
“54-3”, press “54”, then press “–” and
“3”.
Adjusts the volume.
Brings up the OSD.
Displays Media Play (USB) (p. 33).
Quickly select frequently used functions.
Returns to the previous menu.
Buttons used in the Channel list, Media
Play (USB) menu, etc.
Use these buttons in Media Play (USB)
and Anynet+ (HDMI-CEC) modes
(p. 33, 40). (
: Controls recording
for Samsung recorders that have the
Anynet+ feature
[PC550]BN68-02580B-Eng.indb 8 2010-03-05 오후 7:20:24
9
01 Getting Started
English
Connecting to an Antenna
When the TV is initially powered on, basic settings proceed automatically.
Connecting the power cord and antenna.
Plug & Play (Initial Setup)
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the
POWER
button. Plug & Play is available only when the Input source is set to TV.
To return to the previous step, press the Red button.
1
Selecting a language
Press the or button, then press the ENTER
button.
Select the desired OSD (On Screen Display) language.
P
POWER
INFO GUIDE
2
Selecting Store Demo
or Home Use
Press the or button, then press the ENTER
button.
y Select the Home Use mode. Store Demo Mode is for retail
environments.
y To return the unit’s settings from Store Demo to Home Use
(standard): Press the volume button on the TV. When you
see the volume OSD, press and hold MENU for 5 sec.
3
Selecting an antenna
Press the or button, then press the ENTER
button. Select Air, Cable or Auto.
4
Selecting a channel
Press the or button, then press the ENTER
button. Select the channel source
to memorize. When setting the antenna source to Cable, a step appears allowing you to
assign numerical values (channel frequencies) to the channels. For more information, refer to
Channel Auto Program (p. 15).
Press the ENTER
button at any time to interrupt the memorization process.
5
Setting the Clock
Mode
Set the Clock Mode automatically or manually.
y Auto: Allows you to select DST (Daylight Saving Time) mode and time zone
y Manual: Allows you to manually set the current date and time (p. 22).
6
Viewing the HD
Connection Guide.
The connection method for the best HD screen quality is displayed.
7
Enjoy your TV.
Press the ENTER
button.
If You Want to Reset This Feature...
MENU
Setup Plug & Play ENTER
ANT OUT
VHF/UHF Antenna
Antenna Cable (Not Supplied)
or
Cable
Power Input
[PC550]BN68-02580B-Eng.indb 9 2010-03-05 오후 7:20:25
10
English
Connections
Connecting to an AV Device
Using an HDMI or HDMI/DVI cable: HD connection (up to 1080p)
Available devices: DVD, Blu-ray player, HD cable box, HD STB (Set-Top-Box) satellite receiver.
PN50C540 / PN58C540
PN50C550 / PN50C590 / PN58C550 / PN58C590
HDMI IN 1(DVI), 2, 3, 4, PC/DVI AUDIO IN
x
When using an HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) jack for video. A DVD, Blu-ray
player, HD cable box, HD STB satellite receiver may require a DVI-HDMI (DVI to HDMI) cable or DVI-HDMI (DVI
to HDMI) adapter. The PC/DVI AUDIO IN jack is required for audio.
x
If an external device such as a DVD / Blu-ray player / cable box / STB satellite receiver supporting HDMI
versions older than 1.3 is connected, the TV may operate abnormally (e.g. no screen display / no sound /
annoying flicker / abnormal color).
x
If there is no sound after connecting an HDMI cable, check the HDMI version of the external device. If you
suspect the version is older than 1.3, contact the provider of the device to confirm the HDMI version and
request an upgrade.
x
It is recommended you purchase an HDMI-certified cable. Otherwise, the screen may appear blank or a
connection error may occur.
HDMI OUT
DVI OUT
AUDIO OUT
R-AUDIO-L
W
R
WR
Device Device
Red White
HDMI Cable (Not Supplied)
HDMI to DVI Cable (Not Supplied)
Audio Cable (Not Supplied)
W
R
HDMI OUT
DVI OUT
AUDIO OUT
R-AUDIO-L
WR
Device
Device
Red White
HDMI Cable (Not Supplied)
HDMI to DVI Cable (Not Supplied)
Audio Cable (Not Supplied)
[PC550]BN68-02580B-Eng.indb 10 2010-03-05 오후 7:20:26
11
English
02 Connections
Using a Component (up to 1080p) or Audio/Video (480i only) Cable
Available devices: DVD, Blu-ray player, cable box, STB satellite receiver, VCR
COMPONENT IN 1, 2 / AV IN 1: When connecting to AV IN 1, the color of the AV IN 1 [Y/VIDEO] jack (green)
will not match the video cable (yellow).
For better picture quality, the Component connection is recomended over the A/V connection.
Connecting to an Audio Device
Using an Optical Cable (Digital) or Audio (Analog) Cable Connection
Available devices: Digital Audio System, Amplifier, DVD home theater
DIGITAL AUDIO OUT (OPTICAL)
x
When a Digital Audio System is connected to the DIGITAL AUDIO OUT (OPTICAL) jack, decrease the volume
of both the TV and the system.
x
5.1 CH (channel) audio is available when the TV is connected to an external device supporting 5.1 CH.
x
When the receiver (home theater) is set to on, you can hear sound output from the TVs optical jack. When the
TV is receiving a DTV signal, the TV will send 5.1 CH sound to the home theater receiver. When the source is
a digital component such as a DVD / Blu-ray player / cable box / STB (Set-Top-Box) satellite receiver and is
connected to the TV via HDMI, only 2 CH audio will be heard from the home theater receiver. If you want to
hear 5.1 CH audio, connect the digital audio out jack from your DVD / Blu-ray player / cable box / STB satellite
receiver directly to an amplifier or home theater.
AUDIO OUT: Connects to the audio input jacks on your amplifier/DVD home theater.
x
When connecting, use the appropriate connector.
x
When an audio amplifier is connected to the AUDIO OUT jacks: Decrease the volume of the TV and adjust the
volume level with the amplifier's volume control.
PR PB Y
COMPONENT OUT
AUDIO OUT
R-AUDIO-L
AUDIO OUT
R-AUDIO-L
VIDEO OUT
R
W
R GB
R W
Y
R
W
R GB
R
W
R B G
WR
WR
Y
Y
Red
Red
White
Blue Green
Red White Yellow
Device
Device
Audio Cable (Not Supplied) Component Cable
(Not Supplied)
Audio Cable
(Not Supplied)
Video Cable
(Not Supplied)
OPTICAL
AUDIO IN
R-AUDIO-L
W
R
R
W
Digital Audio System
Amplifier / DVD home
theater
Red White
Optical Cable (Not Supplied)
Audio Cable (Not Supplied)
[PC550]BN68-02580B-Eng.indb 11 2010-03-05 오후 7:20:27
12
Using an EX-Link Cable Connection
Available Devices: External devices that support EX-Link
EX-LINK: Connector for service only.
Connecting to a PC
Using an HDMI/DVI cable or a D-sub cable
English
Connections
PN50C540 / PN58C540
AUDIO OUT
DVI OUT
AUDIO OUT
PC OUT
Audio Cable (Not Supplied)
D-Sub Cable (Not Supplied)
HDMI to DVI Cable (Not Supplied)
Audio Cable (Not Supplied)
PN50C550 / PN50C590 / PN58C550 / PN58C590
AUDIO OUT
DVI OUT
AUDIO OUT
PC OUT
Audio Cable (Not Supplied)
D-Sub Cable (Not Supplied)
HDMI to DVI Cable (Not Supplied)
Audio Cable (Not Supplied)
[PC550]BN68-02580B-Eng.indb 12 2010-03-05 오후 7:20:30
13
English
02 Connections
Display Modes (D-Sub and HDMI/DVI Input)
Optimal resolution is 1920 X 1080 @ 60 Hz.
Mode Resolution
Horizontal Frequency
(KHz)
Vertical Frequency
(Hz)
Pixel Clock Frequency
(MHz)
Sync Polarity
(H / V)
IBM
640 x 350
720 x 400
31.469
31.469
70.086
70.087
25.175
28.322
+/-
-/+
MAC
640 x 480
832 x 624
1152 x 870
35.000
49.726
68.681
66.667
74.551
75.062
30.240
57.284
100.000
-/-
-/-
-/-
VESA CVT
720 x 576
1152 x 864
1280 x 720
1280 x 960
35.910
53.783
56.456
75.231
59.950
59.959
74.777
74.857
32.750
81.750
95.750
130.000
-/+
-/+
-/+
-/+
VESA DMT
640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
1024 x 768
1024 x 768
1024 x 768
1152 x 864
1280 x 1024
1280 x 1024
1280 x 720
1280 x 800
1280 x 800
1280 x 960
1360 x 768
1440 x 900
1440 x 900
1680 x 1050
31.469
37.861
37.500
37.879
48.077
46.875
48.363
56.476
60.023
67.500
63.981
79.976
45.000
49.702
62.795
60.000
47.712
55.935
70.635
65.290
59.940
72.809
75.000
60.317
72.188
75.000
60.004
70.069
75.029
75.000
60.020
75.025
60.000
59.810
74.934
60.000
60.015
59.887
74.984
59.954
25.175
31.500
31.500
40.000
50.000
49.500
65.000
75.000
78.750
108.000
108.000
135.000
74.250
83.500
106.500
108.000
85.500
106.500
136.750
146.250
-/-
-/-
-/-
+/+
+/+
+/+
-/-
-/-
+/+
+/+
+/+
+/+
+/+
-/+
-/+
+/+
+/+
-/+
-/+
-/+
VESA GTF
1280 x 720
1280 x 1024
52.500
74.620
70.000
70.000
89.040
128.943
-/+
-/-
VESA DMT / DTV CEA
1920 x 1080p 67.500 60.000 148.500 +/+
NOTE
x
For HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) jack.
x
The interlace mode is not supported.
x
The set may operate abnormally if a non-standard video format is selected.
x
Separate and Composite modes are supported. SOG(Sync On Green) is not supported.
[PC550]BN68-02580B-Eng.indb 13 2010-03-05 오후 7:20:31
14
English
Connections
Changing the Input Source
Source List
Use to select TV or an external input sources
such as a DVD / Blu-ray player / cable box /
STB satellite receiver.
MENU
Input Source List
ENTER
TV / PC / AV1 / AV2 / Component1 /
Component2 / HDMI1/DVI / HDMI2 / HDMI3 / USB
(PN50C540 / PN58C540)
TV / PC / AV1 / AV2 / Component1 / Component2
/ HDMI1/DVI / HDMI2 / HDMI3 / HDMI4 / USB
(PN50C550 / PN50C590 / PN58C550 / PN58C590)
You can only choose external devices that
are connected to the TV. In the Source List,
connected inputs will be highlighted.
In the Source List, PC is always activated.
Edit Name
MENU
Input Edit Name ENTER
VCR / DVD / Cable STB / Satellite STB / PVR STB /
AV Receiver / Game / Camcorder / PC / DVI PC / DVI
Devices / TV / IPTV / Blu-ray / HD DVD / DMA: Name
the device connected to the input jacks to make your
input source selection easier.
When a PC with a resolution of 1920 x 1080 @ 60Hz is
connected to the HDMI IN 1(DVI) port, you should set
to DVI PC mode under Edit Name.
When connecting an HDMI/DVI cable to the HDMI IN
1(DVI) port, you should set to DVI PC or DVI Devices
mode under Edit Name.
SOURCE
Basic Features
How to Navigate Menus
Before using the TV, follow the steps below to learn how to
navigate the menu and select and adjust different functions.
POWER
T
OO
L
S
POWER
PO
RPOWER
S
E
O
O
F
P
C
M
EN
U
S
O
P
O
E
P
S
E
CC
S
A
B
C
D
S
INF
O
FAV.
CH
MEDIA
.
P
C
S
4
1
2
3
EXIT
EXIT
EXIT
RETURN
RETURN
MENU
1 MENU button: Displays the main on-screen menu.
2 ENTER
/ Direction button: Move the cursor and
select an item. Confirm the setting.
3 RETURN button: Returns to the previous menu.
4 EXIT button: Exits the on-screen menu.
How to Operate the OSD (On Screen Display)
The access step may differ depending on the selected menu.
1
MENU
The main menu options appear on
the screen:
Picture, Sound, Channel, Setup,
Input, Application, Support.
2
/ Select an icon with the or
button.
3
ENTER
Press ENTER
to access the
sub-menu.
4
/
Select the desired submenu with
the or button.
5
/
Adjust the value of an item with the
or button. The adjustment in
the OSD may differ depending on
the selected menu.
6
ENTER
Press ENTER
to confirm the
selection.
7
EXIT
Press EXIT.
[PC550]BN68-02580B-Eng.indb 14 2010-03-05 오후 7:20:32
15
English
03 Basic Features
Channel Menu
Seeing Channels
Channel List
Add, delete or set Favorite channels and use
the program guide for digital broadcasts.
MENU
Channel Channel List
ENTER
Select a channel in the All Channels,
Added Channels, Favorite or Programmed
screen by pressing the / and ENTER

buttons. Then you can watch the selected channel.
All Channels: Shows all currently available
channels.
Added Channels: Shows all added channels.
Favorite: Shows all favorite channels.
Programmed: Shows all currently reserved
programs.
Using the color buttons with the Channel List
x
Red (Antenna): Switches to Air or Cable.
x
B
Green (Zoom): Enlarges or shrinks a channel
number.
x
Yellow (Select): Selects multiple channel lists.
Select desired channels and press the Yellow button
to set all the selected channels at the same time. The
mark appears to the left of the selected channels.
x
(Page): Move to next or previous page.
x
(Tools): Displays the Channel List option menu.
(The options menus may differ depending on the
situation.)
Channel Status Display Icons
Icons Operations
A channel selected.
A channel set as a Favorite.
A reserved Program.
Using Favorite Channels
MENU
Channel Channel List ENTER
Add to Favorite / Delete from Favorite
Set channels you watch frequently as Favorites.
1. Select a channel and press the TOOLS button.
2. Add or delete a channel using the Add to Favorite or
Delete from Favorite menu respectively.
To show all Favorite channels, click on the
button shown on the rignt.
Memorizing channels
MENU
Channel ENTER

Antenna (Air / Cable)
Before your television can begin memorizing the available
channels, you must specify the type of signal source that is
connected to the TV (i.e. an Air or a Cable system).
Auto Program
Air: Air antenna signal.
Cable: Cable antenna signal.
Auto: Air and Cable antenna.
CH LIST
FAV.CH
6 Air
6-1 * TV #6
7 Air
8 Air
9 Air
9-1 * TV #9
10 Air
10-1 * TV #10
11-1 * TV #11
Air Antenna
B
Zoom Select
Page

Tools
Added Channels
6 Air
6-1 * TV #6
7 Air
8 Air
9 Air
9-1 * TV #9
10 Air
10-1 * TV #10
11-1 * TV #11
Air Antenna
B
Zoom Select
Page

Tools
Added Channels
Delete
Add to Favorite
Timer Viewing
Channel Name Edit
Select All
[PC550]BN68-02580B-Eng.indb 15 2010-03-05 오후 7:20:34
16
English
Basic Features
NOTE
x
When selecting the Cable TV system: STD, HRC
and IRC identify various types of cable TV systems.
Contact your local cable company to identify the
type of cable system that exists in your particular
area. At this point, the signal source has been
selected.
x
After all the available channels are stored, it starts
to remove scrambled channels. The Auto program
menu then reappears.
Editing Channels
MENU
Channel Channel List ENTER
Channel Name Edit
1. Select a channel and press the TOOLS button.
2. Edit the channel name using the Channel Name Edit
menu.
Channel Name Edit (analog channels only): Assign your
own channel name.
Other Features
MENU
Channel ENTER
Clear Scrambled Channel
This function is used to filter out scrambled channels after
Auto Program is completed. This process may take up to
20~30 minutes.
How to Stop Searching Scrambled Channels
1. Press the ENTER
button to select Stop.
2. Press the button to select Yes.
3. Press the ENTER
button.
This function is only available in Cable mode.
Channel List
Channel List Option Menu
Set each channel using the Channel List menu options (Add
/ Delete, Timer Viewing, Select All / Deselect All). Option
menu items may differ depending on the channel status.
1. Select a channel and press the TOOLS button.
2. Select a function and change its settings.
Add / Delete: Delete or add a channel to display the
channels you want.
NOTE
x
All deleted channels will be shown on the All
Channels menu.
x
A gray-colored channel indicates the channel
has been deleted.
x
The Add menu only appears for deleted
channels.
x
Delete a channel from the Added Channels or
Favorite menu in the same manner.
Timer Viewing: You can set a desired channel to be
displayed automatically at the reserved time. Set the
current time first to use this function.
1. Press the / / / buttons to select the
desired channel in Channel List.
2. Press the TOOLS button, then select Timer
Viewing.
3. Scroll up or down to adjust the settings in the box,
or use the numeric buttons on your remote for
entering the date and time.
If you selected Once, Every Week, or Every
Day in Repeat, you can enter the date you
want.
4. Select OK, then press the ENTER
button when
done.
[PC550]BN68-02580B-Eng.indb 16 2010-03-05 오후 7:20:35
17
English
03 Basic Features
NOTE
x
Only memorized channels can be reserved.
x
Reserved programs will be displayed in the
Programmed menu.
x
When a digital channel is selected, press the
button to view the digital program.
Select All: Select all the channels in the channel list.
Deselect All: Deselect all the selected channels.
You can only select Deselect All when one or
more channels are selected.
Programmed
(in Channel List)
You can view, modify or delete a show you have reserved
to watch. Programmed timer viewing is displayed here.
Highlight a program and press the TOOLS button to display
Options.
Change Info: Change a show you have reserved to
watch. Begin with step 3 of “Timer Viewing,” above.
Cancel Schedules: Cancel a show you have reserved
to watch.
This deletes the highlighted or selected
program(s).
Information: Display a show you have reserved
to watch. (You can also change the reservation
Information.)
Alternatively, you can view Information by
highlighting a program and pressing the
ENTER
button.
Select All / Deselect All: Select or deselect all reserved
programs.
Fine Tune
(analog channels only)
If the reception is clear, you do not have to fine tune the
channel, as this is done automatically during the search and
store operation. If the signal is weak or distorted, fine tune
the channel manually. Scroll to the left or right until the image
is clear.
Settings are applied to the channel your currently
watching.
Fine tuned channels that have been saved are marked
with an asterisk “*” on the right-hand side of the
channel number in the channel banner.
To reset the fine-tuning, select Reset.
Picture Menu
Changing the Preset Picture Mode
MENU
Picture Mode ENTER
Mode
Select your preferred picture type.
Dynamic: Suitable for a bright room.
Standard: Suitable for a normal
environment.
Movie: Suitable for watching movies in a
dark room.
Adjusting Picture Settings
MENU
Picture ENTER
Cell Light / Contrast / Brightness /
Sharpness / Color / Tint (G/R)
Your television has several setting options for picture quality
control.
NOTE
x
When you make changes to Cell Light, Contrast,
Brightness, Sharpness, Color or Tint (G/R) the
OSD will be adjusted accordingly.
x
In PC mode, you can only make changes to
Cell Light, Contrast and Brightness.
x
Settings can be adjusted and stored for each
external device connected to the TV.
Economical Solutions
MENU
Picture Eco Solution ENTER
Eco Solution
Energy Saving (Off / Low / Medium / High / Picture
Off): This adjusts the brightness of the TV in order to
reduce power consumption. If you select Picture Off,
the screen is turned off, but the sound remains on. Press
any button to turn on the screen again. Until the screen
turns on again, a distorted picture will be displayed for
about 4 seconds.
P.MODE
[PC550]BN68-02580B-Eng.indb 17 2010-03-05 오후 7:20:35
18
English
Basic Features
Eco Sensor (Off / On): To enhance your power savings;
the picture settings will automatically adapt to the light
in the room.
If you adjust the Cell Light, the Eco Sensor will
be set to Off.
Min Cell Light: When Eco sensor is On, the minimum
screen brightness can be adjusted manually.
If Eco Sensor is On, the display brightness
may change (become slightly darker or brighter)
depending on the surrounding light intensity.
No Signal Power Off (Off / 15 min. / 30 min. / 60
min.): To avoid unnecessary energy consumption,
set how long you want the TV to remain on if it's not
receiving a signal.
Disabled when the PC is in power saving mode.
Changing the Picture Options
Advanced Settings
MENU
Picture Advanced Settings
ENTER
(Advanced Settings are available in Standard / Movie mode)
Compared to previous models, new Samsung TVs have a
more precise picture.
In PC mode, you can only make changes to Dynamic
Contrast, Gamma and White Balance.
Black Tone (Off / Dark / Darker / Darkest): Select the
black level to adjust the screen depth.
Dynamic Contrast (Off / Low / Medium / High): Adjust
the screen contrast.
Gamma: Adjust the primary color intensity.
RGB Only Mode (Off / Red / Green / Blue): Displays
the Red, Green and Blue color for making fine
adjustments to the hue and saturation.
Color Space (Auto / Native): Adjust the range of colors
available to create the image.
White Balance: Adjust the color temperature for a more
natural picture.
R-Offset / G-Offset / B-Offset: Adjust each color’s (red,
green, blue) darkness.
R-Gain / G-Gain / B-Gain: Adjust each color’s (red,
green, blue) brightness.
Reset: Resets the White Balance to it’s default settings.
Flesh Tone: Emphasize pink “Flesh Tone.”
Edge Enhancement (Off / On): Emphasize object
boundaries.
Picture Options
MENU
Picture Picture Options
ENTER
In PC mode, you can only make changes to the Color
Tone, Size and Screen Burn Protection.
Color Tone (Cool / Normal / Warm1 / Warm2)
Warm1 or Warm2 will be deactivated when the picture
mode is Dynamic.
Settings can be adjusted and stored for each external
device connected to an input on the TV.
Advanced Settings
Black Tone : Off
Dynamic Contrast : Medium
Gamma : 0
RGB Only Mode : Off
Color Space : Native
White Balance
Flesh Tone : 0
Move

Enter

Return
Picture Options
Color Tone : Normal
Size : 16:9
Digital Noise Filter : Auto
MPEG Noise Filter : Auto
HDMI Black Level : Normal
Film Mode : Off
Screen Burn Protection
Move

Enter

Return
[PC550]BN68-02580B-Eng.indb 18 2010-03-05 오후 7:20:36
19
English
03 Basic Features
Size: Your cable box/satellite receiver may
have its own set of screen sizes as well.
However, we highly recommend you use
16:9 mode most of the time.
16:9: Sets the picture to 16:9 wide mode.
Zoom1: Use for moderate magnification.
Zoom2: Use for a stronger magnification.
Wide Fit: Enlarges the aspect ratio of the picture to fit
the entire screen.
Available for HD 1080i / 720p signal in 16:9 mode.
4:3: Sets the picture to basic (4:3) mode.
Do not watch in 4:3 format for a long time. Traces
of borders displayed on the left, right and center
of the screen may cause image retention(screen
burn) which are not covered by the warranty.
Screen Fit: Displays the full image without any cut-off
when HDMI (720p / 1080i / 1080p) or Component
(1080i / 1080p) signals are inputted.
NOTE
x
After selecting Zoom1, Zoom2 or Wide Fit:
1. Press the button to select Position.
2. Press the ENTER
button.
3. Press the or button to move the picture up
or down.
4. Press the ENTER
button.
5. Press the button to select Reset.
6. Press the ENTER
button to reset the picture
to its default position.
x
After selecting Screen Fit in HDMI (1080i/1080p) or
Component (1080i/1080p) mode, you made need to
center the picture:
1. Press the or button to select Position.
2. Press the ENTER
button.
3. Press the , , or button to move the
picture.
4. Press the ENTER
button.
5. Press the or button to select Reset.
6. Press the ENTER
button.
x
HD (High Definition): 16:9 - 1080i/1080p (1920x1080),
720p (1280x720)
x
Settings can be adjusted and stored for each
external device you have connected to an input on
the TV.
Input Source Picture Size
ATV, AV,
Component (480i, 480p)
16:9, Zoom1,
Zoom2, 4:3
DTV(1080i),
Component (1080i, 1080p),
HDMI (720p, 1080i, 1080p)
16:9, 4:3, Wide Fit,
Screen Fit
PC 16:9, 4:3
Digital Noise Filter (Off / Low / Medium / High / Auto
/ Auto Visualization): If the broadcast signal received
by your TV is weak, you can activate the Digital Noise
Filter feature to reduce any static and ghosting that may
appear on the screen.
When the signal is weak, try other options until the
best picture is displayed.
Auto Visualization: When changing analog channels,
displays the intensity of the current signal and defines
the screen noise filter.
Only available for analog channels.
When bar is green, is that the best possible signal.
MPEG Noise Filter (Off / Low / Medium / High /
Auto): Reduces MPEG noise to provide improved
picture quality.
HDMI Black Level (Normal / Low): Selects the black
level on the screen to adjust the screen depth.
Available only in HDMI mode.
Film Mode (Off / Auto1 / Auto2 / Cinema Smooth):
Sets the TV to automatically sense and process film
signals from all sources and adjusts the picture for
optimum quality.
Available in TV, AV, COMPONENT (480i / 1080i)
and HDMI (480i / 1080i).
Cinema Smooth mode is available in PN50C590/
PN58C590 model only.
Screen Burn Protection: To reduce the possibility of
screen burn, this unit is equipped with screen burn
prevention technology. The Time setting allows you to
program the time between movement of the picture in
minutes.
P.SIZE
[PC550]BN68-02580B-Eng.indb 19 2010-03-05 오후 7:20:37
20
English
Basic Features
Pixel Shift (Off / On): Using this function, you can
minutely move pixels on the PDP in horizontal or vertical
direction to minimize after images on the screen.
Optimum condition for pixel shift
Item
TV/AV/Component/
HDMI/PC
Horizontal 0~4 4
Vertical 0~4 4
Time (minute) 1~4 min. 4 min.
The Pixel Shift value may differ depending on the
TV size (inches) and mode.
This function is not available in the Screen Fit
mode.
Auto Protection Time (10 min. / 20 min. / 40 min. / 1
hour / Off): Set the time the screen remains idle with a
still image until the screen saver is activated. The Screen
Saver prevents the formation of ghost images on the
screen.
Scrolling: This function removes after-images on the
screen by moving all the pixels on the PDP according
to a pattern. Use this function when there are remaining
after-images or symbols on the screen, especially when
you displayed a still image on the screen for a long time.
The after-image removal function has to be
executed for a long time (approximately 1 hour)
to effectively remove after-images on the screen.
If the after-image is not removed after performing
the function, repeat the function again.
Press any key on the remote control to cancel this
feature.
Side Gray (Light / Dark): When you watch TV with the
screen ratio set to 4:3, the screen is prevented from any
damage by adjusting the white balance on both extreme
left and right sides.
Picture Reset (OK / Cancel)
Resets your current picture mode to its default settings.
Setting up the TV with Your PC
Set the input source to PC.
MENU
Picture ENTER
Auto Adjustment
Adjust frequency values/positions and fine tune the settings
automatically.
Not available when connecting with an HDMI/DVI cable.
Screen
Coarse / Fine: Removes or reduces picture noise. If the
noise is not removed by Fine-tuning alone, then adjust
the frequency as best as possible (Coarse) and Fine-
tune again. After the noise has been reduced, readjust
the picture so that it is aligned to the center of screen.
Position: Adjust the PC’s screen positioning if it does
not fit the TV screen. Press the or button to adjust
the Vertical-Position. Press the or button to adjust
the Horizontal-Position.
Image Reset: Resets the image to default settings.
Using Your TV as a Computer (PC) Display
Setting Up Your PC Software (Based on Windows XP)
Depending on the version of Windows and the video card,
the actual screens on your PC will probably look different, but
the same basic set-up information will apply in most cases.
(If not, contact your computer manufacturer or Samsung
Dealer.)
1. Click on “Control Panel” on the Windows start menu.
2. Click on “Appearance and Themes” in the “Control
Panel” window and a display dialog-box will appear.
3. Click on “Display” and a display dialog box will appear.
4. Navigate to the “Settings” tab on the display dialog-box.
y The correct size setting (resolution) [Optimum: 1920 X
1080 pixels]
y If a vertical-frequency option exists on your display
settings dialog box, the correct value is “60” or “60 Hz”.
Otherwise, just click “OK” and exit the dialog box.
[PC550]BN68-02580B-Eng.indb 20 2010-03-05 오후 7:20:37
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110

Samsung PN50C550 Le manuel du propriétaire

Catégorie
Téléviseurs à écran plasma
Taper
Le manuel du propriétaire
Ce manuel convient également à

dans d''autres langues