COOL HEAD 712120 Manuel utilisateur

Marque: COOL HEAD

Modèle: 712120

Catégorie: Fabricants de sandwichs

Taper: Manuel utilisateur

712100-115-120-125-140 G2EFD

SALADETTE/COOLING TABLE

SALADETTE/COMPTOIR RÉFRIGERÉE

SALADETTE/KÜHLTISH

model: *712.100 - *712.115 - *712.120

*712.125 - *712.140

E Users manual

F Mode d’emploi

D Bedienungsanleitung

P2M006STD-Ver1.6

Instruction Manual

Bedienungsanleitung

Manuel d’utilisation

Dear Customer,

Congratulations on your purchase of this product.

Please take a few minutes before starting operation of the appliance and read the following operating

instructions.

Table of Contents

Product Overview ....................................................................................................................... 3

Safety Tips .................................................................................................................................. 4

Intended Use .............................................................................................................................. 5

Location and Installation ............................................................................................................. 6

Operation ................................................................................................................................... 7

Cleaning, Care & Maintenance .................................................................................................. 10

Optional Accessory ................................................................................................................... 11

Troubleshooting........................................................................................................................ 13

Disposal .................................................................................................................................... 14

Technical data ........................................................................................................................... 15

Warranty .................................................................................................................................. 15

712100-115-120-125-140 G2EFD 2

Product Overview

Article Description

2 Doors Saladette

2 Doors Saladette - Granite Top

2 Doors Saladette - 4 drawers

2 Doors Saladette - Stainless Steel Top

2 Doors Sandwich - Saladette

2 Doors Saladette - Square Glass

2 Doors Saladette - Curve Glass

2 Doors Saladette - Small Curve Glass

2 Doors Saladette - Flat Granite Top

2 Doors Saladette - 2 drawers

2 Doors Saladette - S/S Top + Splash Back

2 Doors Saladette - No 3 GN1/1

3 doors Saladette

3 doors Saladette - Granite Top

3 doors Saladette - 6 drawers

3 doors Saladette - Stainless Steel Top

3 doors Sandwich - Saladette

3 doors Saladette - Square Glass

3 doors Saladette - Curve Glass

3 doors Saladette - Small Curve Glass

3 doors Saladette - Flat Granite Top

3 doors Saladette - Pizza Granite Top

3 doors Saladette - S/S Top + Splash Back

712100-115-120-125-140 G2EFD 3

Safety Tips

IMPORTANT: For your safety read the manual

carefully before installing or using this product. Save

this manual for future reference.

Consult Local and National Standards to comply with the following:

1. Health and Safety at Work Legislation

2. Fire Precautions

3. IEE Wiring Regulations

4. Building Regulations

5. DO NOT use the appliance outside.

6. DO NOT attempt to service the item yourself.

7. DO NOT use damaged appliances. If you are in any doubt, consult service

agent.

8. DO NOT use electrical appliances inside the appliance (e.g. heaters, ice-

cream makers etc.), unless they are of the type recommended by the

manufacturer.

9. Keep ventilation openings, in the appliance enclosure or in the built-in

structure, clear of obstruction.

10.DO NOT use mechanical devices or other means to accelerate the

defrosting process, other than those recommended by the manufacturer.

11.DO NOT damage the refrigerant circuit.

12.DO NOT stand or support yourself on the base, drawers or doors.

13.DO NOT allow oil or fat to come into contact with the plastic components

or door seal. Clean immediately if contact occurs.

14.This unit can be used by children aged above 8 years and persons with

reduced physical, sensory or mental capabilities or lacking of experience

and knowledge who have been given supervision or using instruction of

the device and understand the resulting risks (for European market).

15.Do not let children play with the appliance.

16.Cleaning and user maintenance must not be carried out by children

without supervision.

17.DO NOT place combustible, explosive or volatile articles, corrosive acids

or alkalis or liquids in the appliance.

712100-115-120-125-140 G2EFD 4

Safety Tips

18.DO NOT use this appliance to store medical supplies.

19.DO NOT use jet/pressure washers to clean the appliance.

20.DO NOT allow children to play with the packaging, and dispose plastic

bags safely.

21.Bottles that contain a high percentage of alcohol must be sealed and

placed vertically in the refrigerator.

22.Always carry, store and handle the appliance in a upright orientation and

move by holding the base of the appliance.

23.Always switch off and disconnect the power supply to the unit before

cleaning.

24.If the supply cord is damaged, it must be replaced by the manufacturer,

its service agent or similarly qualified persons in order to avoid a hazard.

25.This appliance is not intended for use by persons (including children) with

reduced physical, sensory or mental capabilities, or lack of experience and

knowledge, unless they have been given supervision or instruction

concerning use of the appliance by a person responsible for their safety

(for market beyond European).

26.Children should be supervised to ensure that they do not play with the

appliance.

27.For indoor use only. Not suitable for installation in an area where a water

jet could be used. Shall not be cleaned by a water jet.

28.To guarantee safe operation, ensure that the appliance is set up and

connected as described in the instruction manual.

29.Any repairs and work on the appliance should only be carried out by the

customer service department/ qualified technician.

30.The key to the electrical cabinet should be kept out of the reach of

children and users.

31.Do not store explosive substances such as aerosol cans with a flammable

propellant in this appliance.

Intended Use

Only use this appliance for cooling and storage of food and beverage for commercial purposes.

712100-115-120-125-140 G2EFD 5

Location and Installation

Remove the appliance from the packaging. Make sure that all protective plastic film and coatings are

thoroughly removed from all surfaces. To prevent injury or damage to the unit, we recommend that the

appliance should be unpacked and set up by two people.

The climatic class can be found on the rating plate. It specifies the ambient temperatures at which the

appliance may be operated. The rating plate can be found inside the appliance.

Climate Class

Max. Ambient Temperature

Relative Humidity

60%

55%

40%

Maintain a distance of 20 cm (7 inches) between the appliance and walls or other objects for ventilation.

Increase this distance if the obstacle is a heat source.

The appliance should be placed on a solid flat and stable floor to reduce noise and vibration. Level the

appliance by adjusting the feet.

Avoid locating the unit in direct sunlight or near heat sources such as ovens or radiators.

Please make sure the appliance is properly ventilated.

Check that the power supply and voltage used comply with the details on the rating plate. The plug

must be accessible after installation.

Correctly connect and disconnect the plug. When inserting ensure the plug is fully engaged. While

unplugging hold the body of the plug. Never pull the supply cord directly.

If the unit is to be shut down for long period, switch it off and disconnect the plug from socket outlet.

Clean the appliance and leave the door open to prevent odour.

Important! For your personal safety, this appliance must be properly grounded (earthed). This

appliance is equipped with a cord having a grounding wire with a grounding plug. The plug must be

inserted into an outlet that is properly grounded and installed. Consult a qualified electrician or service

centre if you do not completely understand the grounding instructions. If doubt exits whether the

appliance is properly grounded, have a qualified electrician check the circuit to make sure the outlet is

properly grounded.

If the cable does not reach the nearest socket, either rearrange your store layout or ask a qualified

electrician to fix a new socket.

If power is cut off, wait for at least 3 minutes before restarting the appliance to avoid damaging the

compressor.

Slide the shelf/drawer into place.

Note: If the unit has not been stored or moved in an upright position, let it stand upright for

approximately 12 hours before operation.

Note: Before using the appliance for the first time, clean the shelves and interior with soapy water.

712100-115-120-125-140 G2EFD 6

Operation

Storing food

To get the best results from your appliance, follow these instructions:

Only store foodstuffs in the appliance when it has reached the correct operating temperature.

Ensure GN container bays are full at all times, even if the GN containers are unused or empty.

Empty bays will greatly reduce efficiency of the appliance.

Always close the door, lid or drawer when not in use.

Do not place uncovered hot food or liquid inside the appliance.

Wrap or cover food where possible.

Do not obstruct the fan inside the appliance.

Avoid opening the doors for prolonged periods of time.

The food must be put into container before placed into cabinet or on the shelf. Food must not be

placed into food cabinet directly.

Turn on

Close the door of the appliance.

Ensure the power switch is set to [O] then connect to the power outlet.

Switch on the Power [I]. The current temperature within the appliance is displayed.

The on the control panel will flash to indicate a delay to compressor start.

Open/ Close the lid or drawer

The lid of the Sliding Top Saladette is multi positional

With the lid closed, slide the panel back into the half open position. This allows partial access to the

GN container trays.

Lift the lid up and back so the hinge settles into the support slot.

Lift the lid up and completely back so the GN container trays are completely exposed.

WARNING: The sliding lid does not have a locking mechanism. Always make sure that the lid is in the ‘half-

open’ position before opening.

WARNING: Do not pull the drawer out of its full open position to avoid any hurt.

712100-115-120-125-140 G2EFD 7

Operation

Temperature Setting and Control (Dixell)

The front panel of the thermostat display:

1. Defrost indicator

2. Compressor operation indicator

3. SET key

4. Temperature modification keys

5. Defrost button

How to see the set point

• Push and immediately release the SET key, the set point will be showed;

• Push and immediately release the SET key or wait about 15s to return to normal visualisation.

How to change the set point

• Push the SET key for more than 2 seconds to change the set point value;

• The value of the set point will be displayed and the “°C” starts blinking;

• To change the set value push the „ “ (up) or “ ” (down) arrows within 15s.

• To memorise the new set point value push the SET key again or wait 15s.

Automatic defrost

•The appliance will automatically run defrost cycles.

Note: The cycle starts from the time the appliance is initially powered up.

Manual Defrost:

• Press and hold the DEFROST button for 5 seconds.

• The defrost cycle will start immediately and the Defrost LED illuminates.

Note: Starting a manual defrost also resets the automatic defrost timer.

712100-115-120-125-140 G2EFD 8

Operation

Temperature setting and control (EVCO)

The front panel of the thermostat

1. Compressor operation light

2. Defrosting light

3. Energy saving light

4. Stand-by light

5. Programming key (service agent only)

6. Machine On/Stand -by (keep pushed)

7. Manual defrost (keep pushed)

How to turn the machine in ON / STAND -BY status

Press and hold the key for 4s, the machine will turn from ON to STAND -BY status and vice-versa.

During the button hold the LED will blink to show status changing.

How to unlock the keyboard (»Loc» message)

Push any button for more than 2s, «UnL» message will appear and the keyboard will be unlocked.

Note: For safety reasons the keyboard locks automatically after 30s of keys inactivity.

To execute any operation, please unlock the keyboard first.

How to see and modify the set point

Push and immediately release the key, the set point will be showed and starts blinking;

To change the set value push or arrows within 20s.

To memorize the new set point value push the key again or wait 20s.

Automatic defrost

The appliance will automatically run defrost cycles.

Note: The cycle starts from the time the appliance is initially powered up.

Manual Defrost:

Press and hold the DEFROST button for 3s;

The defrost cycle will start immediately and the Defrost LED illuminates.

Note: Starting a manual defrost also resets the automatic defrost timer.

712100-115-120-125-140 G2EFD 9

Cleaning, Care & Maintenance

Routine maintenance

Switch off and disconnect from the power supply before cleaning.

Clean the enclosure and interior of the appliance as often as possible.

Clean the unit with moist cloth. Never allow the switch, control panel, cable or plug to get wet.

Do not use abrasive cleaning agents. These can leave harmful residues. Use only mild soapy

water.

Clean the door seal with water only.

Ensure that no cleaning water penetrates into the electrical components.

Must not be cleaned by a water jet.

Always wipe dry after cleaning with soft cloth.

Do not allow water used in cleaning to run through the drain hole into the evaporation pan.

Take care when cleaning the rear of the appliance.

An agent or technician must carry out repairs if required.

If the appliance is to be left inactive for long periods, unplug the appliance after having turned

the switch to OFF position, empty the refrigerating compartment and clean thoroughly.

Special maintenance

The instructions given in the following paragraph can be followed from qualified technicians

Periodically clean the condenser using suitable tools (vacuum cleaner or soft brushes) can extend

the life of the appliance.

Check that the electrical connections are not loose.



Check that the thermostat and the sensor are in proper working order.

Marble Care

Do not use abrasive materials or detergents to clean the worktop. Wash with warm, soapy water.

Do not put hot or frozen material on the marble top to avoid break.

Wipe up any spillages as quickly as possible, particularly liquids such as lemon juice or vinegar.

Recommend the use of a chopping board to reduce the risk of damage to your worktop.



Dry thoroughly with a soft cloth after cleaning.

How to clean the condenser filter

712100-115-120-125-140 G2EFD 10

Optional Accessory

Four pieces of Castor

Positioning: Two castors with break to be fixed at the bottom front and two castors with no break to be

fixed at the bottom rear.

Procedure: Follow the 8 steps below to change the Saladettes footings to casters.

Note: If you intend to purchase optional accessories, please ask our sales staff for advice.

Caution:

Unplug the appliance from main socket before change.

Securing the fork lift before change.

Securing all drawers, shelves, lids and doors before change.

Empty the cabinet before change.

Lock the brake on the caster after change.

712100-115-120-125-140 G2EFD 11

Optional Accessory

Open the engine room

712100-115-120-125-140 G2EFD 12

Troubleshooting

Fault

Potential Failure

Problem solving action

The appliance is

not working

The unit is not switched on

Check the unit is plugged in correctly and

switched on

Plug and/ or lead are damaged

Call your agent or qualified technician

Fuse in the plug has blown

Replace the fuse (UK Plug)

Power supply

Check power supply

The appliance

turns on, but the

temperature

is too high/ low

Too much ice on the evaporator

Defrost the appliance

Condenser blocked with dust

Call your agent or qualified technician

Doors are not shut properly

Check doors are shut and seals are not

damaged

Appliance is located near a heat

source or air flow to the condenser is

being interrupted

Move the refrigerator to a more suitable

location

Ambient temperature is too high

Increase ventilation or move appliance to a

cooler position

Unsuitable foodstuffs are being

stored in the appliance

Remove any excessive hot foodstuffs or

blockages to the fan

Appliance is overloaded

Reduce the amount of food stored in the

appliance

The appliance is

unusually loud

Loose nut/ screw

Check and tighten all nuts and screws

The appliance has not been installed

in a level or stable position

Check installation position and change if

necessary

The appliance is

leaking water

The appliance is not properly leveled

Adjust the screw feet to level the appliance

(if applicable)

The discharge outlet is blocked

Clear the discharge outlet

Movement of water to the drain is

obstructed

Clear the floor of the appliance (if

applicable)

The water container is damaged

Call your agent or qualified Technician

The drip tray is overflowing

Empty the drip tray (if applicable)

712100-115-120-125-140 G2EFD 13

Disposal

If the appliance is no longer of use and you wish to dispose of it, remove doors to prevent any small child

from be trapped inside. Then please do in an environmentally correct way.

Contact a qualified service technician:

1. To recover all Freon/refrigerant

2. To remove the compressor or remove the oil from the compressor

3. To remove the flammable insulation blowing gases

Then the distributor/ retailer can contact their local metal recycling center to pick up the remaining cabinet,

shelves, etc.

There may be special requirements or conditions. You can obtain information on the disposal of

refrigeration appliances from:

Your supplier

Government authorities (The local council, Ministry of the Environment, etc.)

By law, disposal of hazardous wastes may be subject to fines and imprisonment under the provisions of the

environmental regulations.

1. The refrigerant of this unit is a hydrocarbon refrigerant and is covered by the Kyoto Protocol.

2. Releasing the refrigerant to the atmosphere will harm the environment by contributing to the

global warming. The Global Warming Potential (GWP) of R600a/R290 is 3.

Disposal

Discarded electric appliances are recyclable and should not be discarded in the domestic

waste! Please actively support us in conserving resources and protecting the

environment by returning this appliance to the collection centres (if available).

Dispose of packaging in accordance to applicable legal regulations.

712100-115-120-125-140 G2EFD 14

Technical data

Model

Saladette (2 Door, 3 Door)

Climate Class

Please refer to the information indicated on the product. You will find

the information on the rating label on the back of the unit as well as

inside the cooling compartment. The circuit diagram is displayed on the

back of the unit as well as inside the cooling compartment

Refrigerant Gas

Refrigerant Charge

Temperature Range (°C)

Input Power

Rated Frequency

Rated Voltage

Internal volume

Net Weight

Gross Weight

Foaming Agent

External Dimension (mm)

CAUTION: RISK OF FIRE AND EXPLOSION WITH FLAMMABLE

REFRIGERANT R600a/R290.

Environmental Protection

Discarded electric appliances are recyclable and should not be discarded in the domestic waste!

Please actively support us in conserving resources and protecting the environment by returning

this appliance to the collection centres (if available).

Warranty

A statutory warranty applies for this product.

Damages caused by wrong treatment or operation, by false placement or storage, improper connection or

installation, as well as force or other external influences are not covered by this warranty. We recommend

careful reading of the operating instructions as it contains important information.

Note:

1. In case this product does not function correctly, please firstly check if there are other reasons, e.g. for

electrical appliances interruption of the power supply, or generally incorrect handling are the cause.

2. Please note that, where possible, the following documents or rather information should be provided

together with your faulty product:

Purchase receipt

Model description/ Type/ Brand

Describe the fault and problem as detailed as possible

In the case of a claim for guarantee or defects, please contact the seller.

GWL 8/14 EN

712100-115-120-125-140 G2EFD 15

Traduction du mode d’emploi d’origine

Cher Client,

Félicitations pour l'achat de ce produit. Veuillez prendre quelques minutes pour lire les instructions

d’utilisation suivantes avant de commencer à utiliser l’appareil.

Table des matières

Aperçu du produit ..................................................................................................................... 35

Conseils relatifs à la sécurité ..................................................................................................... 36

Utilisation prévue ..................................................................................................................... 38

Emplacement et installation ...................................................................................................... 38

Mise en route ........................................................................................................................... 39

Nettoyage, soin et entretien ..................................................................................................... 42

Accessoires optionnels .............................................................................................................. 43

Dépannage ............................................................................................................................... 45

Mise au rebut ........................................................................................................................... 46

Donées techniques ................................................................................................................... 47

Garantie ................................................................................................................................... 47

712100-115-120-125-140 G2EFD 16

Aperçu du produit

Description du produit

(2 portes) Saladette

(2 portes) Saladette - Plan de travail en granit

(2 portes) Saladette - 4 tiroirs

(2 portes) Saladette - Plande travail en acier inoxydable

(2 portes) Saladette - à sandwiches

(2 portes) Saladette - Vitrine carrée

(2 portes) Saladette - Vitrine courbe

(2 portes) Saladette - Petite vitrine courbe

(2 portes) Saladette - Plan de travail en granit plat

(2 portes) Saladette - 2 tiroirs

(2 portes) Saladette - Plan de travail en acier inoxydable +Anti-éclaboussement

(2 portes) Saladette - Numéro 3 GN1/1

(3 portes) Saladette

(3 portes) Saladette - Plan de travail en granit

(3 portes) Saladette - 6 tiroirs

(3 portes) Saladette - Plan de travail en acier inoxydable

(3 portes) Saladette - à sandwiches

(3 portes) Saladette - Vitrine carrée

(3 portes) Saladette - Vitrine courbe

(3 portes) Saladette - Petite vitrine courbe

(3 portes) Saladette - Plan de travail en granit plat

(3 portes) Saladette - Plan de travail anti-éclaboussement en granit

(3 portes) Saladette - Plan de travail en acier inoxydable +Anti-éclaboussement

712100-115-120-125-140 G2EFD 17

Conseils relatifs à la sécurité

IMPORTANT: Pour votre sécurité, veuillez lire le manuel

attentivement avant d'installer ou d'utiliser ce produit.

Conservez ce manuel pour consultation ultérieure.

Consultez les normes locales et nationales suivantes pour vous y conformer:

1. Législation relative à la santé et à la sécurité au travail

2. Mesures anti-incendie

3. Normes de câblage IEE

4. Normes de construction

5. NE PAS utiliser l’appareil à l’extérieur.

6. NE PAS tenter de réparer l’appareil par soi-même.

7. NE PAS utiliser d’appareils endommagés. En cas de doute, veuillez

consulter des réparateurs agréés.

8. NE PAS utiliser d'appareils électriques à l'intérieur de l'appareil (p. ex. des

appareils de chauffage, des sorbetières, etc.), à moins que ceux-ci ne

soient du type recommandé par le fabricant.

9. Évitez d’obstruer les orifices de ventilation de l’enceinte de l’appareil ou

de la structure intégrée.

10.NE PAS utiliser de dispositifs mécaniques ou tous autres moyens pour

accélérer le processus de dégivrage autres que ceux recommandés par le

fabricant.

11.NE PAS endommager le circuit réfrigérant.

12.NE PAS vous tenir debout ou prendre appui sur la base, les tiroirs ou la

porte.

13.NE PAS laisser de l’huile ou de la graisse entrer en contact avec les

éléments en plastique ou le joint de la porte. En cas de contact, nettoyez

immédiatement.

14.Cet appareil peut être utilisé par des enfants de 8 ans et plus et par des

personnes ayant des capacités physiques, sensorielles ou mentales

réduites ou manquant d’expérience et de savoir-faire sous réserve

qu’elles soient sous la surveillance d’une personne ou aient reçu des

instructions concernant l’utilisation de l’appareil en toute sécurité et

qu’elles comprennent les dangers que l’appareil présente (pour le marché

européen).

15.Ne laissez pas les enfants jouer avec l'appareil.

16.Le nettoyage et l'entretien de la part de l'utilisateur ne doivent pas être

effectués par des enfants laissés sans surveillance.

712100-115-120-125-140 G2EFD 18

Conseils relatifs à la sécurité

17.NE placez AUCUNE substance combustible, explosive ou volatile, ni aucun

fluide agressif, acide et alcalin dans l’appareil.

18.NE PAS utiliser cet appareil pour stocker des fournitures médicales.

19.NE PAS utiliser de nettoyeurs à jet/haute pression pour nettoyer

l’appareil.

20.NE PAS laisser les enfants jouer avec l’emballage, et détruisez tous sacs en

plastique de manière sécurisée.

21.Les bouteilles contenant un pourcentage élevé d’alcool doivent être

fermées hermétiquement et placées à la verticale dans le réfrigérateur.

22.Transportez, rangez et manipulez toujours l’appareil en le positionnant à

la verticale et déplacez-le en tenant la base de l’appareil.

23.Mettez toujours l'appareil hors tension, puis débranchez-le de la prise de

courant avant de procéder à son nettoyage.

24.Si le cordon d'alimentation est endommagé, son remplacement doit être

confié au fabricant, à son service de réparation ou à une personne

possédant les mêmes qualifications, afin de prévenir tout risque.

25.L’utilisation de cet appareil n’est pas destinée aux personnes (y compris

les enfants) ayant des capacités physiques, sensorielles ou mentales

réduites ou à celles manquant d’expérience et de savoir-faire, à moins

qu’elles ne soient sous la surveillance ou reçoivent des instructions d’une

personne responsable de leur sécurité (pour le marché en dehors de

l’Europe).

26.Surveillez vos enfants afin de vous assurer que ceux-ci ne jouent pas avec

l’appareil.

27.Utilisation réservée exclusivement à l'intérieur. Cet appareil n’est pas

conçu pour être utilisé dans un endroit où des jets d’eau peuvent être

utilisés. L’appareil ne doit pas être nettoyé par jet d’eau.

28.Afin garantir une utilisation en toute sécurité, assurez-vous que l’appareil

est installé et branché conformément aux descriptions données dans le

manuel d’utilisation.

29.Toutes réparations et tous travaux sur l’appareil doivent être effectués

exclusivement par notre service clientèle/technicien qualifié.

30.La clé du meuble électrique doit être conservée hors de la portée des

enfants et utilisateurs.

31.Ne gardez pas de substances explosives, notamment des contenants

d'aérosol avec des gaz propulseurs inflammables, dans cet appareil.

712100-115-120-125-140 G2EFD 19

Utilisation prévue

Utilisez cet appareil exclusivement pour la réfrigération et le stockage de produits alimentaires et de

boissons à des fins commerciales.

Emplacement et installation

Retirez l'emballage de l'appareil. Assurez-vous de retirer de toutes les surfaces l’intégralité des films et

revêtements de protection en plastique. Afin de prévenir tous risques de blessures et

d’endommagement de l’appareil, nous recommandons que l’appareil soit déballé et installé par deux

personnes.

La catégorie climatique est indiquée sur la plaque signalétique. Elle indique à quelles temperature

ambiantes l’aappareil peut functioner. La plaque signalétique se trouve à l’intérieur de l’appareil.

Classe climatique

Max. temperature ambiante

l'humidité relative de l'air

60%

55%

40%

Conservez une distance de 20 cm (7 pouces) entre l'appareil et les murs ou tout autre objet, pour

permettre une ventilation optimale. Augmentez cette distance si l'obstacle est une source de chaleur.

L’appareil doit être posé sur un sol solide, nivelé et stable afin de réduire au minimum tous bruits et

vibrations. Mettez l’appareil à niveau en réglant les pieds.

Évitez d’installer l’appareil en l’exposant aux rayons du soleil ou à proximité de sources thermiques,

notamment des fours ou des radiateurs.

Veuillez vous assurer que l'appareil est correctement ventilé.

Vérifiez si l’alimentation électrique correspond à la tension indiquée sur la plaque signalétique. La fiche

doit être accessible après installation.

Branchez et débranchez la fiche de manière appropriée. Lorsque vous insérez la fiche dans une prise,

assurez-vous que la fiche est entièrement insérée. Lorsque vous débranchez l'appareil, faites-le en

tenant le corps de la fiche. Ne tirez jamais le cordon d’alimentation directement.

Si vous envisagez de mettre l’appareil hors service pendant une période prolongée, mettez-le hors

tension, puis débranchez-le de la prise de courant. Nettoyez l’appareil et laissez la porte ouverte afin

d’éviter les mauvaises odeurs dans l’appareil.

Important! Pour votre sécurité personnelle, cet appareil doit être mis à la terre de manière

appropriée. Cet appareil est muni d’un cordon électrique comportant un conducteur de terre et une

prise de mise à la terre. La fiche doit être insérée dans une prise mise à la terre et installée de manière

appropriée. Consultez un électricien qualifié ou un centre de réparation si vous ne comprenez pas

parfaitement les instructions de mise à la terre. En cas de doute concernant la mise à la terre adéquate

de l’appareil, faites contrôler le circuit par un électricien qualifié afin de vous assurer que la prise de

courant est mise à la terre de manière appropriée.

Si le cordon d'alimentation n'atteint pas la prise de courant la plus proche, réorganisez l'agencement

du magasin ou demandez à un électricien qualifié d'installer une nouvelle prise.

En cas de coupure de courant, patientez au moins 3 minutes avant de redémarrer l’appareil, afin

d’éviter d’endommager le compresseur.

Faites glisser l'étagère/le tiroir pour la/le mettre en place.

Remarque: Si l'unité n'a pas été stockée ou déplacée dans une position verticale, posez-la

verticalement pendant environ 12 heures avant de l'utiliser.

Remarque: Avant d'utiliser l'appareil pour la première fois, nettoyez les étagères et l'intérieur à l'eau

savonneuse.

712100-115-120-125-140 G2EFD 20

La page charge ...

COOL HEAD 712120 Manuel utilisateur

Marque: COOL HEAD

Modèle: 712120

Catégorie: Fabricants de sandwichs

Taper: Manuel utilisateur

Télécharger le PDF

rapport

dans d''autres langues

English: COOL HEAD 712120 User manual
Deutsch: COOL HEAD 712120 Benutzerhandbuch

COOL HEAD 712120 Manuel utilisateur

COOL HEAD 712120 Manuel utilisateur

dans d''autres langues

Autres documents