Unify OpenScape Desk Phone CP410 SIP Mode d'emploi

Unify OpenScape

Desk Phone CP

Atos Unify

OpenScape Desk Phone

CP410

User Guide SIP

A31003-C1000-U150-01-7619

2 Important information

Important information

For safety reasons, the telephone should only be supplied with power:

lusing the original power supply unit.

lover a LAN with PoE (Power over Ethernet), which complies with the IEEE

802.3af standard.

Never open the telephone. Should you encounter any problems, consult your

administrator.

Use only original accessories.

The use of other accessories is hazardous and will render the warranty, extended

manufacturer's liability and the CE and other markings invalid.

Trademarks

The device conforms to the EU Directive as attested by the CE marking. The CE

Declaration of Conformity and, where applicable, other existing declarations of

conformity as well as further information on regulations that restrict the usage

of substances in products or affect the declaration of substances used in

products can be found in the Unify Expert WIKI at http://wiki.unify.com/

http://wiki.unify.com in the section "Declarations of Conformity".

The adjacent symbol indicates that any electrical and electronic products

installed and sold in countries of the European Union to which the WEEE2 Dir-

ective 2012/19/EU applies should be disposed of separately from the municipal

waste stream in appropriate collection systems.

Information concerning the proper disposal of your Unify product in the busi-

ness-to-business market segment is available from your local sales rep-

resentative in Unify or partner sales.

Software update

During a software update, the phone must not be disconnected from the power supply unit or the

LAN. An update action is indicated by messages on the display and by flashing LEDs.

Important information 3

Care and cleaning instructions

lNever spray the phone with liquids as the penetrating fluids can lead to malfunctions or

may damage the device.

lDo not use substances such as alcohol, chemicals, solvents or scouring agents, as these

substances can lead to surface damage.

lClean the phone with a soft and slightly damp cloth.

Online documentation

This document along with additional information is available online at:

https://www.unify.com/ àSupport.

Technical notes, current information about firmware updates, frequently asked questions and

lots more can be found on the Internet at: https://wiki.unify.com/.

Location of the telephone

lThe telephone may only be operated using the LAN cabling internally in the building. The

device should be connected to the IP infrastructure using a shielded LAN cable: Cat-5 for

100Mbps or Cat-6 for 1000Mbps. Make sure in the building installation that this cable

shielding is earthed.

lWhen using the additional Wi-Fi dongle CP10 when connecting the phone to the network,

make sure that the network security standards (e.g. encryption) and availability are met

lThe telephone is designed for operation in a protected environment within a temperature

range of 5°C to 40°C.

lDo not install the telephone in a room where large quantities of dust accumulate; this can

considerably reduce the service life of the telephone.

lDo not expose the telephone to direct sunlight or any other source of heat, as this is liable

to damage the electronic components and the casing.

lDo not install the telephone in bathrooms or shower rooms.

Product-oriented environmental protection

Unify is committed in terms of its product strategy to bringing environmentally friendly products

to market, taking account of the entire product life cycle. Unify strives to acquire the relevant

environmental labels for its products in the event that the environmental label programs permit

qualification for individual Unify products.

4 Important information

Energy Star

ENERGY STAR is a US Environmental Protection Agency voluntary program

that helps businesses and individuals Save money and protect our climate

through superior energy efficiency.

Products that earn the ENERGY STAR prevent greenhouse gas emissions by

meeting strict energy efficiency criteria or requirements set by the US Envir-

onmental Protection Agency.

Unify is an ENERGY STAR partner participating in the ENERGY STAR program for Enterprise Serv-

ers and Telephony.

The Unify products OpenScape Desk Phones have earned the ENERGY STAR. Learn more at

energystar.gov

License information

For further information about EULA (End User License Agreement) and Open Source licenses,

consult your administrator or the web-based management (WBM).

Contents 5

Contents

Important information 2

Trademarks 2

Software update 2

Care and cleaning instructions 3

Online documentation 3

Location of the telephone 3

Product-oriented environmental protection 3

License information 4

General information 13

About this manual 13

Icons used in the manual 13

Displays for describing operation 14

Selecting and confirming actions 14

Action not selected 15

Conversation display 15

Service 16

Intended use 17

Telephone type 17

Speakerphone quality and display legibility 17

Single-line telephone/ multi-line telephone 17

Remote configuration for cloud service providers 18

From factory defaults to operational telephone 18

Connect the telephone 18

Entering the “Deployment PIN” 18

Starting the remote configuration 19

Cancelling the remote configuration 19

Getting to know the OpenScape Desk Phone CP410 20

The user interface of the phone 20

Function keys 21

Fixed function keys 22

Programmable function keys on the phone 22

6 Contents

Navigation keys 23

Audio controls 24

Dialpad 25

Display 28

Display brightness 28

Display contrast 28

Home screen 29

Displays on the status line for adjusting the volume 36

Voicemail 37

Adjusting the display angle 37

Different display interfaces 37

Context-dependent displays 40

Actions with function keys 40

Action via dialpad 40

Actions with navigation keys 41

Ports on the underside of the phone 42

Threading the connection cables 43

How to use network connections 43

Using the USB port 44

About key modules 44

Function keys on the key module 44

Key module KM410 45

Key module KM710 46

Updating the phone 47

Operating the OpenScape Desk Phone CP410 48

Conversations 48

Opening details of a conversation or conducting a call 49

Creating or editing conversations 50

Searching for conversations 52

Filtering conversations 55

Displaying the history of a conversation 56

Deleting conversations 56

Marking all conversations as read 57

Telephony interface 58

Telephony view 58

Programmable function keys 59

Contents 7

Programmable keys on the key module 59

Answering machine (“Voicemail”) 60

Inline notification 60

Display of the inline notification 61

Shortened inline notification 61

Cancelling inline notification 62

Settings menu 62

User settings 62

Administrator settings 63

Control and monitoring function 64

Remote monitor and access warnings 64

Status during connection 65

Configuring the phone default settings 66

Adjusting the display brightness 66

Adjusting the default volumes 66

Adjusting the key clicking sound 67

Connecting to OpenScape UC 69

Making calls 71

Incoming calls 71

Answering a call via the handset 71

Answering a call via the loudspeaker (speakerphone mode) 71

Answering a call via the headset 72

Rejecting a call 73

Deflecting a call 73

Responding to a “Callback” 73

Outgoing calls 74

Off-hook dialling 74

Dial with the handset on hook 74

Dialling with the selected dialling key 76

Dialling from conversations 76

Calling with a direct station select (DSS) key 77

Redialling 78

Calling back a missed call 78

Requesting callback 79

8 Contents

Using autodial delay 80

During a call 80

Activating or deactivating the microphone 80

Changing the volume 80

Switching from handset to speakerphone mode 81

Switching from speakerphone mode to the handset 81

Switching from headset to speakerphone mode 81

Open listening to the room 82

Displaying DTMF digits 82

Using pre-configured DTMF codes 82

Consulting a second party 83

Switching to the held party (alternating) 84

“Conference” calls 84

Putting on hold and retrieving Alternately or simultaneously 86

Connecting parties 87

Placing a call on hold 87

Call waiting (second call) 87

Transferring a call 90

Ending a call 91

Configuring local call forwarding 92

Configuring “Call forwarding” controls 92

Setting alerts 92

Using Microsoft® Exchange 93

Searching for contacts via conversations 94

Listening to voice mail 95

Programming the function keys 97

List of available functions 97

About programming a key 98

Programming a key 98

Labelling function keys 99

Setting up a selected dialling key 100

Programming enhanced functions 100

Using contact data from a conversation 102

Deleting an assigned function from a key 102

Resetting all assigned functions to keys 102

Contents 9

Making calls in the team 104

Group call 104

Picking up the group call with the key “Call pickup” 105

Picking up a group call immediately 105

Picking up a group call 106

Ignoring a group call 106

Making calls via multiple lines (“multi-line”) 106

Line or trunk keys 106

Incoming calls 108

Call barging 109

Making calls on a multi-line phone 110

During a call 113

Settings for MultiLine (keyset) 115

Rollover for a line 116

Direct station selection keys 117

Meaning of LEDs on DSS keys 117

Calling a contact directly 117

Call pick-up 118

Deflecting a call to a DSS contact 119

Making calls in an executive/ secretary team 119

Mobility function 121

Logging on to another phone 121

Ending the mobility function on a phone (log off) 121

Logging a mobile user off when the phone is locked 122

Switching E/A state when logging off 122

Privacy and security 124

“Do not disturb” 124

Enabling do not disturb via “Presence” 124

Enabling do not disturb via a key 124

Allowing “Do not disturb” 124

Security 125

Setting the user password 125

Deactivating the password prompt 127

Locking the phone 127

10 Contents

Other settings and functions 130

Setting the “Landing screen” 130

Audio settings 131

Ringer type 131

Switching to a ringer beep 131

Pattern melody 132

Pattern sequence 132

Room character 133

Open listening mode 133

Setting the headset port use 134

Special ringers 135

Activating or deactivating the ringer 135

Tone and indication with unsecured voice connection 136

Country-specific setting 136

Display language 137

Date display format 138

Time display format 138

Screen saver 139

Activating the screen saver 139

Setting the screen saver activation interval 140

Uploading images for the screen saver 141

Energy saving mode 141

Setting daylight saving time 142

Setting the difference between daylight saving and standard time 142

Enabling automatic daylight saving time 143

Displaying the date and time settings 143

Displaying network information 144

Resetting user data 144

Managing avatar images 145

Assigning a contact avatar 146

Programming call forwarding 147

Using call forwarding 148

Activating immediate call forwarding 148

Saving destination phone numbers for call forwarding 148

Managing call forwarding 149

Copying and pasting destination phone numbers 149

Activating or deactivating call forwarding 150

Contents 11

Defining the ring duration before call forwarding is activated 151

Call forwarding chain 151

CTI calls 152

Beep on auto-answer 152

Beep on auto-reconnect 152

Paging call 153

Enabling or disabling the hold reminder tone 154

Setting the hold reminder time 154

Enabling or disabling “Hold and hang-up” 155

Enabling or disabling “Music on hold” 155

Allowing call joining 156

Permitting call deflection 156

Deflecting to a phone number from an existing local conversation 157

Deflecting to a DSS number 157

Allowing call waiting 157

Connecting contacts by hanging up 158

Allowing call transfer 159

Settings for autodial delay 159

Allowing “Busy when dialling” for outgoing calls 160

Allowing “Transfer on ring” 160

Enabling immediate dialling 161

Permitting a callback 161

Allowing a conference 162

Allow joining in a conference 162

Activating or deactivating the LED notification 163

Selecting the voicemail messages LED notification 163

Selecting the LED notification for missed calls 164

Clear LED notification for missed calls 164

Call logging 165

Disable logging 165

Displaying the missed call log 165

Displaying call log data from RingCentral 166

Call recording 167

Recording modes 167

Explanations of recording 168

Recording calls 169

Diagnostic data 174

12 Contents

Individual settings that impact energy efficiency 175

Web interface (WBM) 176

Launching the web interface 176

Administrator settings 176

Logging into the user settings 176

User menu 177

Licenses 177

Importing contacts via WBM 177

Exporting contacts via WBM 178

Fixing problems 180

Caring for your phone 180

Troubleshooting 180

Messages during remote configuration 181

Repair and recycling concept, extending performance cap-

ability 183

Recycling and disposal of equipment in the OpenScape Desk Phone family 183

Repair reliability and spare part supply 184

Extending performance capability 184

Special features for operation on an OpenScape4000 185

Passively supported functions 185

Index 186

13 General information

General information

About this manual

This document contains general descriptions of the technical options, which may

not always be available in individual cases. The required features must therefore

be individually defined in the terms of the contract.

If a particular function on your phone is not available to you as described, this may

be due to one of the following reasons:

lThe function is not configured for you and your telephone. Please contact

your system administrator.

lYour communication platform does not feature this function. Please con-

tact your Unify sales partner for information on how to upgrade.

Your telephone can be operated on an OpenScape4000 telephone system. Indi-

vidual telephone features may deviate on an OpenScape4000 from those

described.

Features in relation to operation on an OpenScape4000 can be found in the sec-

tion "Special features for operation on an OpenScape4000" àpage 185.

This User Guide should be read and followed by every person installing, operating

or programming the OpenScape Desk Phone.

For your own protection, read the section dealing with safety in

detail. Follow the safety instructions carefully in order to avoid endan-

gering yourself or other persons and to prevent damage to the unit.

This User Guide is designed to be simple and easy to understand, providing clear

step-by-step instructions for operating the OpenScape Desk Phone.

Icons used in the manual

Operations and settings that can be made both at the phone and over the web

interface are indicated by an icon and page reference.

This icon refers to an operation or setting performed via the web interface.

This icon refers to an operation or setting performed directly on the phone.

Indicates important additional information in relation to handling.

Indicates required intervention by the Administrator.

General information 14

Displays for describing operation

Keys required to perform an action, such as or and the associated dis-

play text, are shown in the highlighted column on the left. The action is described

in the main column on the right.

To improve the legibility of the user guide, the operating steps are not always

shown in full.

The option “Contrast” is configured in the following example.

Selecting and confirming actions

Original illustration on display

Step-by-step illustration in the user guide

The action area on the right of the display changes colour according to the action

required or the status.

Settings When an action is selected, it will be shown right-aligned in blue.

The action is executed by selecting the corresponding function key.

The selected function can also be confirmed using the key “OK”.

15 General information

Action not selected

Display illustrations

Step-by-step illustration in the user guide

Favourites When an action is not selected, it will be shown right-aligned in a dark grey colour.

The corresponding key is also shown.

The action can be executed by pressing the key even if it has not been selected.

Conversation display

When the phone is idle, the first entry in the conversation list is highlighted and

selected.

General information 16

Information displayed for a selected conversation

Melanie Miller If a conversation contact is selected in the list, it will be highlighted in blue.

Accept and select the conversation by pressing the adjacent function key or press

to establish the connection.

To open the context menu, press the navigation key.

Information displayed for a non-selected conversation

John Doe A conversation is displayed with a grey background if it is not selected.

Press the adjacent navigation key to establish the connection.

Service

The service department can only help you if you experience problems or defects

with the phone itself.

Should you have any questions regarding operation, your specialist retailer or Net-

work administrator will be glad to assist you.

For queries regarding connection of the telephone, contact your Network provider.

If you experience problems or defects with the phone, dial the service

number for your country.

17 General information

Intended use

The OpenScape Desk Phone CP410 is a desktop unit designed for voice trans-

mission and for connection to the LAN. It can also be used as a workstation

device. The OpenScape Desk Phone CP410 can also be connected to Wi-Fi with

the additional Wi-Fi dongle CP10.

Any other use is regarded as unintended.

Telephone type

The identification details (exact product designation and serial number) of the tele-

phone can be found on the nameplate on the underside of the base unit. Specific

details concerning your communication platform can be obtained from your admin-

istrator.

Have this information ready when you contact our service depart-

ment regarding faults or problems with the product.

Speakerphone quality and display legibility

lTo ensure good speakerphone quality, the area in front of the microphone

(bottom right of the telephone front panel) should be kept clear. The

optimum distance is approx. 50cm.

lProceed as follows to optimize display legibility:

nTurn the phone to tilt the display to ensure you have a frontal view of

the display and avoid light reflections.

Single-line telephone/ multi-line telephone

The OpenScape Desk Phone CP410 can be used as "multi-line telephone", i.e. mul-

tiple lines can be configured instead of a single line. Each line is assigned to an

individual phone number you can use to make and receive calls.

The programmable keys are configured as line keys on multi-line phones ("Pro-

gramming the function keys" àpage 97).

All lines and their status is displayed in the screen Favourites, configurable with 4

available programmable keys. You can add more lines by attaching one or more

key modules to the phone.

The screen Favourites is only available, when no key module is con-

nected.

Remote configuration for cloud service providers 18

Remote configuration for cloud service

providers

From factory defaults to operational

telephone

This section describes the Remote administration process, from the initial factory

defaults to the operational telephone.

If your telephone is already operational, continue reading from section "Getting to

know the OpenScape Desk Phone CP410"

à

page 20.

You can start up your new OpenScape Desk Phone yourself using a remote main-

tenance function. The prerequisites for this are:

lThe administrator has provided you with a PIN for the initial start-up.

lYou have a LAN connection with access to the internet.

lYou have a new CP410 phone that you want to start up using the remote

maintenance function.

Connect the telephone

Connect the telephone to the LAN. If the power is not supplied by the LAN cable,

connect a power supply if appropriate (the power supply is not needed with PoE).

The telephone should now boot.

The telephone recognizes based on the stated conditions that a remote con-

figuration is about to be performed and starts the process.

The start-up is finished when all LEDs are out and the key “Settings” is flash-

ing.

Entering the “Deployment PIN”

The first time you start up the telephone, it will automatically check the remote

administration requirements. If the requirements are met, you are prompted to

enter the “Deployment PIN” (Cloud PIN).

19 Remote configuration for cloud service providers

Enter the PIN you received from the administrator. Only numeric characters are

accepted.

Confirm the entry.

Starting the remote configuration

Once you have entered a valid PIN, the remote configuration of the telephone

starts automatically.

Once the configuration is concluded, the telephone is operational with the required

settings. You can now make calls.

New operating system software may be downloaded and installed during the

remote configuration. If this happens, reboot the telephone after the remote con-

figuration.

Cancelling the remote configuration

You can stop the process in order to continue the configuration manually before

entering the PIN or after entering an invalid PIN.

lThe remote configuration is concluded once you enter a valid PIN. The pro-

cess can no longer be cancelled at this stage.

lIf an error still occurs even though a correct PIN has been entered, repeat

the configuration by restarting the telephone.

lLikewise repeat the process following a cancellation by restarting the

phone, assuming you have not already started the manual configuration.

Press the key. The following message is displayed:

Abort deployment Press the key to confirm that the process is cancelled. The following message is

displayed:

Deployment aborted The telephone is set to the factory defaults and must be configured manually by

you or the administrator. Optionally, repeat the remote configuration by restarting

the telephone.

Note that all “No telephony possible” errors are hidden as long as

Cloud Deployment is in progress.

When Cloud Deployment is complete then any error codes that are

still relevant will be shown as error notifications.

Getting to know the OpenScape Desk Phone CP410 20

Getting to know the OpenScape Desk

Phone CP410

The following sections describe the most frequently used controls and displays.

The user interface of the phone

1You can make and receive calls as normal using the handset.

2The status LED displays the phone connection status. Incoming calls

and new voice mails are visually signalled via the notification LED.

3The display shows information during telephone operation.

La page charge ...

Unify OpenScape Desk Phone CP410 SIP Mode d'emploi

Unify OpenScape Desk Phone CP410 SIP Mode d'emploi

dans d''autres langues

Documents connexes

Autres documents