Aeg-Electrolux 68031K-MN 10S Manuel utilisateur

68031K-MN

User Manual

Notice d’utilisation

Gebruiksaanwijzing

Ceramic glass

induction hob

Table de cuisson

vetrocéramique à

induction

Glaskeramische

inductie-kookplaat

2

Dear Customer

Thank you for choosing one of our high-quality products.

With this appliance you will experience the perfect combination of functional

design and cutting edge technology.

Convince yourself that our appliances are engineered to deliver the best per-

formance and control - indeed we are setting the highest standards of excel-

lence.

In addition to this you find environmental and energy saving aspects as an inte-

gral part of our products.

To ensure optimal and regular performance of your appliance please read this

instruction manual carefully. It will enable you to navigate all processes perfect-

ly and most efficiently.

To refer to this manual any time you need to, we recommend you to keep it in a

safe place. And please pass it to any future owner of the appliance.

We wish you much joy with your new appliance.

Th

e

f

o

ll

ow

i

ng sym

b

o

l

s are use

d

i

n t

hi

s user

i

n

f

ormat

i

on:

1

Warning! This must be read! Important advice for the safety of persons and

information on avoiding damage to the appliance

3 General information and advice

2 Information on environmental protection

z Dangerous voltage

3

Contents

Safety instructions 4

Description of the Appliance 6

Cooking surface layout 6

Control panel layout 7

Touch Control sensor fields 8

Displays 8

Residual heat indicator 8

Operating the appliance 10

Switching the appliance on and off 10

Setting the heat setting 10

Locking/unlocking the control panel 10

Switching the STOP+GO function on and off 11

Using the automatic warm-up function 11

Using the child safety device 13

Switching the power function on and off 14

Using the timer 15

Automatic switch off 18

Tips on Cooking and Frying 19

Cookware for induction cooking zones 19

Tips on energy saving 20

Examples of cooking applications 21

Cleaning and Care 22

What to do if … 23

Disposal 25

Installation Instructions 26

Safety instructions 26

Guarantee/Customer Service 28

Service 29

Assembly 88

Rating Plate 91

Safety instructions4

Operating Instructions

1 Safety instructions

Please comply with these instructions. If you do not, any damage resulting is not

covered by the warranty.

Correct use

• This appliance is not intended for use by children or other persons whose

physical, sensory or mental capabilities or lack of experience and knowledge

prevents them from using the appliance safely without supervision or instruc-

tion by a responsible person to ensure that they can use the appliance safely.

• Do not leave the appliance unattended during operation.

• This appliance should be used only for normal domestic cooking and frying of

food.

• The appliance must not be used as a work surface or as a storage surface.

• Additions or modifications to the appliance are not permitted.

• Do not place or store flammable liquids, highly inflammable materials or fusi-

ble objects (e.g. plastic film, plastic, aluminium) on or near the appliance.

Children’s safety

• Small children must be kept away from the appliance.

• Only let bigger children work on the appliance under supervision.

• To avoid small children and pets unintentionally switching the appliance on,

we recommend activation of the child safety device.

General safety

• The appliance may only be installed and connected by trained, registered

service engineers.

• Built-in appliances may only be used after they have built in to suitable built-

in units and work surfaces that meet standards.

• In the event of faults with the appliance or damage to the glass ceramic

(cracks, scratches or splits), the appliance must be switched off and discon-

nected from the electrical supply, to prevent the possibility of an electric

shock.

• Repairs to the appliance must only be carried out by trained registered service

engineers.

5Safety instructions

Safety during use

• Remove stickers and film from the glass ceramic.

• There is the risk of burns from the appliance if used carelessly.

• Cables from electrical appliances must not touch the hot surface of the appli-

ance or hot cookware.

• Overheated fats and oils can ignite very quickly. Warning! Fire hazard!

• Switch the cooking zones off after each use.

• Users with implanted pacemakers should keep their upper body at least 30 cm

from induction cooking zones that are switched on.

• Risk of burns! Do not place objects made of metal, such as knives, forks,

spoons and saucepan lids on the cooking surface, as they can get hot.

Safety when cleaning

• For cleaning, the appliance must be switched off and cooled down.

• For safety reasons, the cleaning of the appliance with steam jet or high-pres-

sure cleaning equipment is not permitted.

How to avoid damage to the appliance

• The glass ceramic can be damaged by objects falling onto it.

• The edge of the glass ceramic can be damaged by being knocked by the cook-

ware.

• Cookware made of cast iron, cast aluminium or with damaged bottoms can

scratch the glass ceramic if pushed across the surface.

• Objects that melt and things that boil over can burn onto the glass ceramic

and should be removed straightaway.

• Do not use the cooking zones with empty cookware or without cookware.

• To avoid damaging cookware and glass ceramics, do not allow saucepans or

frying pans to boil dry.

• The ventilation gap of 5mm between the worktop and front of the unit un-

derneath it must not be covered.

Description of the Appliance6

Description of the Appliance

Cooking surface layout

Induction cooking zone 2300 W

with power function 3700 W

Induction cooking zone 1850 W

with power function 2500 W

Induction cooking zone 1850 W

with power function 2500 W

Control panel Induction cooking zone 1400 W

with power function 1800 W

7Description of the Appliance

Control panel layout

On/Off

with indicator

Timer display

Cooking zone indicators

Timer function

Child lock with display

Timer

STOP+GO

with indicator

Heat setting selection

Heat setting indicator

Power function

Description of the Appliance8

Touch Control sensor fields

The appliance is operated using Touch Control sensor fields. Functions are con-

trolled by touching sensor fields and confirmed by displays and acoustic signals.

Touch the sensor fields from above, without covering other sensor fields.

Displays

Residual heat indicator

1 Warning! Risk of burns from residual heat. After being switched off, the cook-

ing zones need some time to cool down. Look at the residual heat indicator .

3 Residual heat can be used for melting and keeping food warm.

Sensor field Function

On / Off To switch the appliance on and off

Child lock Locking control panel for children

Stop+Go To switch the Keep Warm setting on/

off

Power Switching the power function on and

off

Timer Timer selection

Increase settings To increase Timer time

Reduce settings To reduce Timer time

Display Description

Keep Warm setting STOP+GO function is set

- Heat settings To set heat settings

Power Power function is switched on

Fault Malfunction has occurred

Residual heat Cooking zone is still hot

Child safety device Lock/child safety device is engaged

Automatic switch off Switch off is active.

9Description of the Appliance

Control bar

The control bar is a special Touch Control field.

The control bar is touched where the de-

sired heat setting is positioned. The heat

setting is shown in the display. Correct to

the left or the right, if necessary.

Do not release before the desired heat set-

ting is reached.

3 If the control bar is touched for longer

than 6 seconds, a signal sounds and the

appliance switches itself off.

The induction cooking zones create the

heat required for cooking directly in the

base of the cookware. The glass ceramic is

merely heated by the residual heat of the cookware.

The cooling fan switches itself on and off depending upon the temperature of

the electronics.

Operating the appliance10

Operating the appliance

3

Use the induction cooking zones with suitable cookware.

Switching the appliance on and off

3 After switching on, within approx. 10 seconds a heat setting or a function must

be set, otherwise the appliance automatically switches itself off.

Setting the heat setting

Locking/unlocking the control panel

The control panel, with the exception of the “On/Off” sensor field, can be locked

at any time in order to prevent the settings being changed e.g. by wiping over

the panel with a cloth.

3 When you switch the appliance off, the locking function is automatically

switched off.

Control panel Display Pilot light

Switch on Touch for 1 second / lights up

Switch off Touch for 1 second / none goes out

Control bar Display

To set the heat

setting

Touch the desired heat setting, if

necessary, correct to the left or the

right

to /

To switch off Touch 0

Control panel Display

Switch on Touch (for 4 seconds)

Switch off Touch previously set heat setting

11Operating the appliance

Switching the STOP+GO function on and off

The STOP+GO function simultaneously switches all cooking zones that are

switched on to the keep warm setting and then back to the heat setting that

was previously set.

3 Timer functions are not stopped by STOP+GO.

3 STOP+GO locks the whole control panel except the sensor field .

Using the automatic warm-up function

All cooking zones are equipped with an automatic warm-up function. When set-

ting a heat setting using the automatic warm-up function, the cooking zone

switches to full power for a certain amount of time and then automatically

switches back to the heat setting set.

The length of time that the automatic warm up function operates depends on

the heat setting selected.

Control panel Display

To switch on Touch

To switch off Touch heat setting that was previously

set (not automatic warm up func-

tion)

Step Control panel Display

1. Touch

2. Move your finger down from to se-

lect the desired heat setting between

and

/ ,

after 5 seconds .

As long as is displayed,

the appliance works at full

power.

After the automatic warm

up is completed, the heat

setting / is dis-

played again.

Operating the appliance12

Heat setting Length of the automatic warm up

[min:sec]

1 1:00

2 1:40

3 2:40

4 4:50

5 5:30

6 6:30

7 8:10

8 10:10

9 12:20

10

2:30

11

2:30

12

3:30

13

4:30

14

---

13Operating the appliance

Using the child safety device

The child safety device prevents unintentional use of the appliance.

Switching on the child safety device

Overriding the child safety device

The child safety device can be switched off in this way for a single cooking ses-

sion; it remains activated afterwards.

3 After overriding the child safety device, a heat setting or a function must be set

within approx. 10 seconds, otherwise the appliance automatically switches itself

off.

Switching off the child safety device

Step Control panel Display/Signal

1. Switch on appliance. (Do not set a

heat setting.)

2. Touch for 4 seconds

The child safety device is switched on.

Step Control panel Display/Signal

1. Switch appliance on

2. Touch for 4 seconds lights up

Until the appliance is next switched off, it can used as normal.

Step Control panel Display/Signal

1. Switch appliance on

2. Touch for 4 seconds lights up

3. Switch appliance off.

The child safety device is switched off.

Operating the appliance14

Switching the power function on and off

The power function makes more power available to the induction cooking

zones, e.g. to bring a large quantity of water to the boil quickly.

The power function is activated for 10 minutes at most. After that the induction

cooking zone automatically switches back to heat setting 14.

Power Management

The cooking zones of the cooking surface

have a maximum power available to them.

Two cooking zones make up a pair (see fig-

ure).

So that the Power function can always be

carried out, Power Management may re-

duce the power of the other cooking zone

in the pair

Example: heat setting 14 is selected on a

cooking zone. The Power function is

switched on for the cooking zone paired up

with it. The Power function is performed,

but heat setting 14 on one cooking zone and Power function on the other cook-

ing zone of a pair exceeds the maximum output for both. Therefore Power Man-

agement reduces the first cooking zone that was switched on from 14 to 7, for

example, and the display for this cooking zone alternates between 14 and 7 and

then remains on the current maximum of 7. (Whether the display alternates be-

tween 14 and 7 or 14 and 6 or other values, depends on the appliance type and

the size of the cooking zone.)

Control panel Display

To switch on Touch

To switch off Touch a heat setting /

15Operating the appliance

Using the timer

3 If a heat setting is set on this cooking zone in addition to a countdown timer,

the cooking zone is switched off after the time set has elapsed.

3 If a cooking zone is switched off, the timer function set is also switched off.

Selecting a cooking zone

3 If the pilot light is flashing more slowly, the heat setting can be set or modified.

3 If other timer functions are set, after a few seconds the shortest remaining time

of all the timer functions is displayed and the corresponding pilot light flashes.

Function Condition Outcome after the

time has elapsed

Automatic cut-out a heat setting is set acoustic signal

00 flashes

Cooking zone switches

off

Countdown timer cooking zones not in use acoustic signal

00 flashes

Step Control panel Display

1. Touch once Pilot light of the first cook-

ing zone flashes

2. Touch once Pilot light of the second

cooking zone flashes

3. Touch once Pilot light of the third

cooking zone flashes

4. Touch once Pilot light of the fourth

cooking zone flashes

Operating the appliance16

Setting the time

Switching off the timer function

Changing the time

Step Control panel Indicator

1. Select cooking zone Pilot light for the cooking zone selected

flashes

2. Touch or 00 to 99 minutes

After a few seconds the pilot light flashes more slowly.

The time is set.

The time counts down.

Step Control panel Indicator

1. Select cooking zone Pilot light of cooking zone selected flash-

es faster

Time remaining is displayed

2. Touch The time remaining counts backwards to

00.

The pilot light goes out.

The Timer function for the selected cooking zone is switched off.

Step Control panel Indicator

1. Select cooking zone Pilot light of the selected cooking zone

flashes faster

Time remaining is displayed

2. Touch or 01 to 99 minutes

After a few seconds, the pilot light flashes more slowly.

The time is set.

The time counts down.

17Operating the appliance

Displaying the time remaining for a cooking zone

Switching off the acoustic signal

Step Control panel field Display

1. Select cooking zone Pilot light of the cooking zone selected

flashes faster

The time remaining is displayed

After a few seconds the pilot light flashes more slowly.

Step Control panel field Acoustic signal

1. Touch Acoustic signal to acknowledge.

Acoustic signal stops.

Operating the appliance18

Automatic switch off

Cooking surface

• If after switching on the cooking surface, a heat setting is not set for a cook-

ing zone within approx. 10 seconds, the cooking surface automatically switch-

es itself off.

• If one or more sensor fields are covered by objects (a pan, etc.) for longer than

approx. 10 seconds, a signal sounds and the cooking surface switches off au-

tomatically.

• If all cooking zones are switched off, the cooking surface automatically

switches itself off after approx. 10 seconds.

Control panel

• When the appliance is switched off, if one or more of the sensor fields on the

control panel are covered for more that 10 seconds, an acoustic signal sounds.

The acoustic signal switches itself off automatically when the sensor fields are

no longer covered.

Induction cooking zones

• In the case of overheating (e.g. when a saucepan boils dry) the cooking zone

automatically switches itself off. is displayed. Before being used again, the

cooking zone must be set to

0 and cooled down.

• If cookware that is not suitable is used, lights up in the display and after 2

minutes the indicator for the cooking zone switches itself off.

• If one of the cooking zones is not switched off after a certain time, or if the

heat setting is not modified, the relevant cooking zone switches off automati-

cally. is displayed. Before being used again, the cooking zone must be set to

.

Heat setting Switches off after

1 - 3 6 hours

4 - 6 5 hours

7 - 8 4 hours

9 -14 1.5 hours

19Tips on Cooking and Frying

Tips on Cooking and Frying

3

Information on acrylamides

According to the latest scientific knowledge, intensive browning of food, espe-

cially in products containing starch, can constitute a health risk due to acryla-

mides. Therefore we recommend cooking at the lowest possible temperatures

and not browning foods too much.

Cookware for induction cooking zones

Cookware material

3 Cookware for induction cooking zones is labelled as suitable by the manufactur-

er.

Suitability test

Cookware is suitable for induction cooking, if …

• ... a little water on an induction cooking zone set to heat setting 9 is heated

within a short time.

• ... a magnet sticks to the bottom of the cookware.

3 Certain cookware can make noises when being used on induction cooking zones.

These noises are not a fault in the appliance and do not affect operation in any

way.

Cookware material Suitable

Steel, enamelled steel yes

Cast iron yes

Stainless steel if appropriately labelled by the manufacturer

Aluminium, copper, brass ---

Glass, ceramic, porcelain ---

Tips on Cooking and Frying20

Bottom of the cookware

The bottom of the cookware should be as thick and flat as possible.

Pan size

Induction cooking zones adapt automatically to the size of the bottom of the

cookware up to a certain point. However the magnetic part of the bottom of the

cookware must have a minimum diameter depending on the size of the cooking

zone.

3 The cookware must be placed centrally on the cooking zone.

Tips on energy saving

2 Place cookware on the cooking zone before it is switched on.

2 If possible, always place a lid on the cookware.

Diameter of cooking zone

[mm]

Minimum diameter of dish base

[mm]

210 180

180 145

145 120

La page charge ...

Aeg-Electrolux 68031K-MN 10S Manuel utilisateur

Aeg-Electrolux 68031K-MN 10S Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents