Sharp 32SC260 Operation Manual Manuel utilisateur

Catégorie
Téléviseurs CRT
Taper
Manuel utilisateur

Ce manuel convient également à

Dimension: 140mm x 215mm
COLOR TELEVISION
H OPERATION MANUAL H
MODEL
32SC260
Products that have earned the ENERGY STARb are designed to protect the
environment through superior energy efficiency.
CONTENTS
PAGE
IMPORTANT INFORMATION/IMPORTANT
SAFEGUARDS .....................................................
2–4
Trademarks ...............................................................
5
Supplied Accessories ...............................................
5
Before Operating Your Television ..............................
5
Antenna Connections ...........................................
6–7
Quick Reference Control Operation ..........................
8
EZ SETUP during First Use ................................
9–10
Antenna Setup DIGITAL ...................................
10–11
Accessing the MAIN MENU screen without
Remote Control .......................................................
11
Channel Call ...........................................................
11
Changing Viewing Channel .....................................
12
Language ................................................................
13
Sleep Timer .............................................................
13
Video Adjust ............................................................
14
Audio Select ......................................................
15–16
MTS (Multichannel TV Sound) ............................
15
SPEAKER (Internal Speaker Switch) ..................
15
FAO (Fixed Audio Output) ...................................
15
AUDIO ADJUST ..................................................
16
Digital Audio ............................................................
17
This operation manual includes basic operating
instructions in Spanish and French.
SPANISH is on page 4549.
FRENCH is on page 50–54
.
PAGE
Closed Caption .................................................
1819
Parent Control ...................................................20
–30
V-CHIP Operation ..........................................
20–27
VIEW TIMER .................................................
28–30
Energy Save ...........................................................
31
Set Up ...............................................................
3236
EZ Setup .......................................................32–33
Channel Setting ............................................
33–35
Blue Screen .........................................................
36
Auto Input ...........................................................37
Screen Format ...................................................38-39
Using the Video and Audio Input Terminals ......
40–41
Using the Audio Output Terminals ...........................
42
Before Calling for Service .......................................
43
Calling for Service ...................................................
43
Warning message for Digital broadcasting .............
44
Specifications ..........................................................
44
Limited Warranty .....................................................
54
C218 WJ
1-4.indd 1 11/22/05 3:44:10 PM
1
STANDARD DEFINITION TELEVISION
2
Dimension: 140mm x 215mm
Welcome to the SHARP Family. We are pleased that you are now the owner of a SHARP Color Television
– built for outstanding quality, reliability and performance.
Every SHARP Color Television set is tuned and adjusted for proper color and sound, and has passed
through the most stringent quality control tests at the factory. We have prepared this OPERATION MANUAL
so that you may adjust the picture and color to your personal viewing preference.
We sincerely hope that you receive the greatest satisfaction and enjoyment from your new SHARP Color
Television set for years to come.
Please read these instructions carefully, and keep them handy for your future reference.
Model No.:
Serial No.:
IMPORTANT
To aid reporting in case of loss or theft, please record the TV’s
model and serial numbers in the space provided. The numbers
are located at the rear of the TV.
IMPORTANT INFORMATION
There are two important reasons for prompt warranty registration of your new SHARP television set. Use
the REGISTRATION CARD packed in with the set.
FIRST – WARRANTY
This is to assure that you will immediately receive the full consumer benefit of the parts, service and labor
warranty applicable to your purchase.
SECOND – CONSUMER PRODUCT SAFETY ACT
To assure that you will promptly receive any safety notification on inspection, modification
or recall
that SHARP may be required to give under the 1972 Consumer Product Safety Act. PLEASE READ
CAREFULLY THE IMPORTANT “LIMITED WARRANTY” CLAUSE ON THE LAST PAGE.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPLIANCE TO WET LOCATIONS.
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
The lightning flash with
arrowhead within a triangle
is intended to tell the user
that parts inside the product
are a risk of electric shock to
persons.
The exclamation point within a
triangle is intended to tell the
user that important operating
and servicing instructions
are in the papers with the
appliance.
“Note to CATV system installer: This reminder is provided to call the CATV system installer’s attention
to Article 820-40 of the National Electrical Code that provides guidelines for proper grounding and, in
particular, specifies that the cable ground shall be connected to the grounding system of the building,
as close to the point of cable entry as practical.
WARNING – FCC Regulations state that any unauthorized changes or modifications to this equipment
not expressly approved by the manufacturer could void the user’s authority to operate this
PRODUCT DISPOSAL
This product utilizes a Cathode Ray Tube (CRT) containing lead and tin-lead solder.
Disposal of these materials may be regulated due to environment considerations. For disposal or
recycling information, please contact your local authorities or the Electronics Industries Alliance:
www.eiae.org
1-4.indd 2 11/22/05 3:44:11 PM
3
Dimension: 140mm x 215mm
IMPORTANT INFORMATION (Continued)
CAUTION:
Do not place the AC power cord under the TV set or other heavy items.
To prevent fire, never place any type of candle or naked flames on the top or near the TV set.
To prevent fire or shock hazard, do not expose this products to dripping or splashing. No objects filled
with liquids, such as vases, should be placed on the product.
CAUTION: Please read all of these instructions before you operate your television and save
these instructions for later use.
Electrical energy can perform many useful functions. This unit has been engineered and manufactured to assure
your personal safety. BUT IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE
HAZARDS. In order not to defeat the safeguards incorporated in this equipment, observe the following basic
rules for its installation, use and servicing.
1. Unplug this television equipment from the wall outlet before cleaning.
2. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
3. Do not use attachments not recommended by the television equipment manufacturer as they may cause
hazards.
4. Do not use this television equipment near water for example, near a bath tub, washbowl, kitchen sink
or laundry tub, in a wet basement, or near a swimming pool, etc.
5. Do not place this equipment on an unstable cart, stand, or table. The television equipment may fall, causing
serious injury to a child or an adult, and serious damage to the equipment. Use only with a cart or stand
recommended by the manufacturer or sold with the television equipment.
6. Television equipment and cart combination should be moved with care. Quick stops,
excessive force, and uneven surfaces may cause the equipment and cart combination to
overturn.
7. Wall or shelf mounting should follow the manufacturer’s instructions, and should use a
mounting kit approved by the manufacturer.
8. Slots and openings in the cabinet and the back or bottom are provided for ventilation. To
insure reliable operation of the television equipment and to protect it from overheating,
these openings must not be blocked or covered. This television equipment should not be placed in a built-in
insulation such as a bookcase unless proper ventilation is provided.
9. The openings should never be covered with a cloth or other material, and the bottom openings should not
be blocked by placing the television equipment on a bed, sofa, rug, or other similar surface. This television
equipment should never be placed near or over a radiator or heat register.
10. This television equipment should be operated only from the type of power source indicated on the marking
label. If you are not sure of the type of power supplied to your home, consult your television dealer or local
power company.
For television equipment designed to operate from battery power, refer to the operating instructions.
11. As a safety feature, television equipment is equipped with a 2-wire polarized plug (one plug blade bigger
than the other). The 2-wire polarized plug will fit only one way into the power outlet.
If the plug does not fit, ask your electrician to replace your obsolete outlet. Do not modify the plug and defeat
this safety feature.
12. Do not allow anything to rest on the power cord. Do not locate this television equipment where the cord will
be abused by persons walking on it.
IMPORTANT SAFEGUARDS
1-4.indd 3 11/22/05 3:44:12 PM
4
Dimension: 140mm x 215mm
IMPORTANT SAFEGUARDS (Continued)
13. Follow all warnings and instructions marked on the television equipment.
14. If an outside antenna is connected to the television equipment, be sure the antenna system is grounded so
as to provide some protection against voltage surges and built-up static charges. Section 810 of the National
Electrical Code provides information with respect to proper grounding of the mast and supporting
structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location
of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding
electrode.
15. For added protection for this television equipment during a lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the wall outlet and disconnect the antenna. This will prevent
damage to the equipment due to lightning and power-line surges.
16. An outside antenna system should not be located in the vicinity of overhead power lines or other electric light
or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna
system, extreme care should be taken to keep from touching such power lines or circuits as contact with
them might be fatal.
17. Do not overload wall outlets and extension cords as this can result in fire or electric shock.
18. Never push objects of any kind into this television equipment through cabinet slots as they may touch
dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid
of any kind on the television equipment.
19. Do not attempt to service this television equipment yourself as opening or removing covers may expose
you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
20. Unplug this television equipment from the wall outlet and refer servicing to qualified service personnel under
the following conditions:
A. When the power cord or plug is damaged or frayed.
B. If liquid has been spilled into the television equipment.
C. If the television equipment has been exposed to rain or water.
D. If the television equipment does not operate normally by following the operating instructions. Adjust only
those controls that are covered by the operating instructions as improper adjustment of other controls
may result in damage and will often require extensive work by a qualified technician to restore
the television equipment to normal operation.
E. If the television equipment has been dropped or the cabinet has been damaged.
F. When the television equipment exhibits a distinct change in performance this indicates a need for
service.
21. Upon completion of any service or repairs to this television equipment, ask the service technician to
perform routine safety checks to determine that the television is in safe operating condition.
22. When replacement parts are required, be sure the service technician has used replacement parts
specified by the manufacturer that have the same characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock, or other hazards.
ANTENNA
LEAD IN
WIRE
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
ELECTRIC
SERVICE
EQUIPMENT
NEC—NATIONAL ELECTRICAL CODE
GROUND
CLAMP
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE
1-4.indd 4 11/22/05 3:44:12 PM
5
Dimension: 140mm x 215mm
Supplied Accessories
Size AA
Dry Batteries
Infrared Remote Control
Location
• For normal operation, your TV should be located in an area of the room where cool adequate
ventilation is provided. Do not place the back of the television set in a place where free airflow will
be restricted.
Any magnetic force may disturb the color picture. Make sure that magnets, electric clocks, toys using
magnets or any other magnetic substance, such as iron are kept well away from the TV set.
Power
Your TV operates on 120 Volts, 60 Hz (normal household current) and has a polarized plug. If you
are unable to insert the plug fully into the outlet, try reversing the plug. Should it fail to fit, contact an
electrician. Do not defeat the safety feature of the polarized plug.
Note:
• If the set is not going to be used for a long period, such as during a vacation, unplug the set from the
wall outlet to economize power. (If the TV set is plugged in, a slight current still flows, even with the
POWER BUTTON in the OFF position.)
• Lines and other noise may appear in TV broadcast images when an FM tuner or radio is located
near the TV and both radio and TV broadcasts are being received. Should such noise appear, turn
off the radio.
• If you are listening to an AM broadcast, turn the TV off. AM broadcast signals may not be received
due to interference from the TV.
Before using the television, prepare the Remote Control
To use the remote control, insert batteries first.
Inserting the batteries
• With your thumbnail, pull up the slit as indicated by the arrow to remove the battery cover. Insert two
batteries (size “AA”). Be sure to match the battery
m/, terminals with the m/, marks inside the
compartment.
Before Operating Your Television
Battery
Cover
Pull up
Trademarks
Dolby and the double-D symbol are registered trademarks of Dolby Laboratories.


 







5-7.indd 5 11/22/05 4:33:50 PM
6
Dimension: 140mm x 215mm
OUTDOOR ANTENNA CONNECTION
• Refer to one of the following two diagrams when connecting to an outdoor antenna.
A: Using a VHF/UHF combination outdoor antenna.
B: Using separate VHF and/or UHF outdoor antenna.
• Connect an outdoor antenna cable lead-in to the ANT/CABLE terminal on the rear of the TV set.
Antenna Connections
A. Combination VHF/UHF Antennas
B. Separate VHF/UHF Antenna
Antennas
• The antenna requirements for good color television reception are more important than those for black &
white television reception. For this reason, a good quality outdoor antenna is strongly recommended.
The following is a brief explanation of the type of connections that are provided with the various
antenna systems:
1. A 75-ohm system is generally a round cable with
F-type connector that can easily be attached to
a terminal without tools (not supplied).
2. A 300-ohm system is a flat “twin-lead” cable that
can be attached to a 75-ohm terminal through a
300/75-ohm ADAPTOR (not supplied).
F-type connector
75-ohm coaxial cable (round)
300-ohm twin-lead cable (flat)
75-ohm
coaxial cable
300-ohm
twin-lead
VHF/UHF ANTENNA
VHF/UHF ANTENNA
300/75-ohm
ADAPTOR
(Not supplied)
or
REAR OF TV
REAR OF TV
IN OUT
300-ohm
twin-lead
300-ohm
twin-lead
75-ohm coaxial
cable
VHF
ANTENNA
UHF
ANTENNA
COMBINER
(not supplied)
or
5-7.indd 6 11/22/05 4:33:51 PM
7
Dimension: 140mm x 215mm
F-type connector
75-ohm coaxial cable
F-type connector should be finger-tightened only.
When connecting the RF cable to the TV set, do not
tighten F-type connector with tools.
If tools are used, it may cause damage to your TV
set.
(The breaking of internal circuit, etc.)
NOTICE
CABLE TV (CATV) CONNECTION
• A 75 ohm coaxial cable connector is built into the set for easy hookup. When connecting the 75 ohm
coaxial cable to the set, screw the 75 ohm cable to the COAXIAL CABLE CONNECTOR.
• Some cable TV companies offer “premium pay channels”. Since the signals of these premium pay
channels are scrambled, a cable TV converter/descrambler is generally provided to the subscriber by
the cable TV company. This converter/descrambler is necessary for normal viewing of the scrambled
channels. (Set your TV on channel 3 or 4. Typically one of these channels is used. If this is unknown,
consult your cable TV company.) For more specific instructions on installing cable TV, consult your
cable TV company. One possible method of utilizing the converter/descrambler provided by your
cable TV company is explained below.
Please note: RF switch equipped with position A/B (not provided) is required.
“A” position on the RF switch (not supplied) : You can view all unscrambled channels using the
TV’s channel keys.
“B” position on the RF switch (not supplied) : You can view the scrambled channels via the converter/
descrambler using the converter’s channel keys.
OUT
A
IN
B
Cable TV converter/
descrambler
(not supplied)
Tw
o-set
signal
splitter
(not
supplied)
Cable TV Line
RF switch (not supplied)
OUT IN
Antenna Connections (Continued)
Note:
Consult your SHARP Dealer or Service Center for the type of splitter, RF switch or combiner that
might be required.
5-7.indd 7 11/22/05 4:33:56 PM
Dimension: 140mm x 215mm
8m.indd 8 11/25/2005 11:32:58 AM
8
9
Dimension: 140mm x 215mm
When you turn on the TV for the first time, it will automatically
memorize the broadcasting channels.
Please perform the following instructions before pressing the
POWER button.
(1) Insert the batteries into the remote control. (See page 5)
(2) Connect the antenna cable to the TV set. (See pages 6, 7)
(3) Plug in the AC POWER cord to the wall outlet.
1 Press the POWER button on the TV set or on the Remote Control
to turn on the TV. The SELECT LANGUAGE screen will be
displayed.
2 Press CH a/s to select “ENGLISH”, “ESPAÑOL (SPANISH)” or
“FRANCAIS (FRENCH)”.
3 Press VOL k/l to access the EZ SETUP screen.
SEL ECT
ENGL I SH
FRANCA I S
SEL ECT : CH
SET : VOL
+
/
/
ESP A ÑOL
LANGUAG
E
SEL ECT
ENGL I SH
FRAN
CA I S
SEL ECT : C
H
SET : VO
L
+
/
/
ESP A ÑOL
LANGUAG
E
START
STOP START
SETUP?EZ
OR CABL E.CONNECT
ANTENNA
STOP START
PL
EASE WA I T
6 9
AUTO
PROGRAMMI NG
CH
CH
VOL
VOL
+
VOLUME
(

)/(
)
CHANNEL
UP ( )/
DOW
N ( )
MEN
U

POWE
R
TV
(EZ SETUP screen)
EZ SETUP during First Use
(On the Remote Control)
(SELECT LANGUAGE screen)
(START)
(STOP)
(On the Set)
STOP START
PL
EASE WA I T
6 9
AUTO
D I G I TAL
PROGRAMMI NG
(Analog channel tunning)
(Digital channel tunning)
9-11.indd 9 11/24/05 8:34:20 AM
4 Press VOL k.
The tuner will automatically search for the
broadcasting or cable TV channels for ANALOG.
(The CH No. will automatically increase when it
appears.)
Once tuning for analog broadcasting channel is
finished, tuning for digital channel will start. If cable
TV channels is detected, it will not proceed to digital
channel tuning.
If you want to stop the EZ SETUP process once it
has started, press VOL l and it will be canceled.
If you want to SET UP again, please refer to page
33, 34 on SET UP.
To cancel EZ SETUP
Press VOL l.
VOL
VOL
+
10
Dimension: 140mm x 215mm
5 Once EZ SETUP is complete, the lowest channel number
memorized will be displayed. (e.g. Channel 2)
Note:
• If EZ SETUP does not memorize all the channels in your region, please refer to pages 33–35 for
more information on manually memorizing the channels using CHANNEL SETTING.
• It may be difficult to PRESET when the broadcast signals are weak, the channel cycle frequency is
incorrect or frequency jamming is occurring around the area. Please refer to pages 33–35 for more
information on manually memorizing the channels using CHANNEL SETTING.
EZ SETUP during First Use (Continued)
2
Antenna Setup - DIGITAL
In order to receive digital air broadcasts, you need a digital broadcast antenna. You can set
the antenna configuration through the Antenna Setup Digital screen.
1 Press MENU to access the MAIN MENU screen.
2 Press CH a/s to move the E mark to “SET UP”.
3 Press VOL k/l to access the SET UP screen, then press
CH a/s to move the “E mark to “CH SETTING”.
4 Press VOL k/l to access the CH SETTING screen, then press
CH
a/s to move the E mark to select “ANTENNA SETUP
DIGITAL”.
Note:
• Antenna Setup Digital can only be select
during Digital Channel.
5 Press VOL k/l to access ANTENNA SETUP - DIGITAL
screen.
H SIGNAL STRENGTH
(i) Press CH a/s to select “SIGNAL STRENGTH”.
(ii) Adjust the direction of the antenna to obtain the signal
strength level 60 or higher.
SL EEP T I MER
AUD I O SEL ECT
CLOSED CAPT I O
N
PARENT CONTRO
L
ENERGY
SET U
P
SAVE
V I DEO ADJ UST
MENU
D I G I T A
L
AUD I O
CC
ES
(MAIN MENU screen)


 

 
(SET UP screen)
A IR/
CH S E A R C H
CH S E A R C H
CH

E Z

CH







DI GI TA L
(CH SETTING screen)






   

CH
CH
VOL
VOL
+
CH
CH
VOL
VOL
+
CH
CH
VOL
VOL
+
CH
CH






   

(ANTENNA SETUP- DIGITAL screen)
9-11.indd 10 11/24/05 8:34:23 AM
11
Dimension: 140mm x 215mm
Antenna Setup - DIGITAL (Continued)
H CHANNEL STRENGTH
Make sure the signal strength of each channel received is finely adjusted.
(i) Press
CH a/s to select “CHANNEL STRENGTH”.
(ii) Input channel number (2–69) using REMOTE KEYPAD
(0–9) button.
(iii) Adjust the direction of the antenna to obtain the signal
strength level 60 or higher.
Note:
• This function is available for DIGITAL channel only.
6 Press MENU to exit.






   

Accessing the MAIN MENU screen without Remote Control
• If you misplaced your Remote Control you can still access most settings
via the MAIN MENU screen by pressing MENU on the TV set.
• Some features of your TV set are not accessible without the Remote
Control. If you lost your Remote Control, contact a Sharp Service Center
for a replacement.
(On the Set)
MENU
button
CH
CH
Channel Call
To display receiving channel information.
1 Press DISPLAY once. The display appears as shown on right.
If the viewing channel is a digital channel, the information of channel number, audio service type,
broadcast station, program information and V-Chip rating will appear.
2 Press DISPLAY twice. The timer information screen will appear.
3 Press DISPLAY again to return to normal screen.
AUDIO: ENGLISH
10.1
DIGITAL
NBC
NONE
SPORTS
(while viewing digital channel)




(while viewing analog channel)
SLEEP T I MER
1 2 0M REMA I N
V I EWI NG T I ME
0 0
M1 0H REMA I N
DISPLA
Y
DISPLA
Y
DISPLA
Y
9-11.indd 11 11/24/05 8:34:26 AM
12
Dimension: 140 X 215 mm
Changing Viewing Channel
Please note: your new Television is capable of receiving the full
range of AIR-TV channels available today, from the most advanced
digital channels, to the more traditional analog channels. As the
transition toward full digital TV continues, some AIR-TV systems
in the USA will have a mixture of analog and digital channels in
their lineups.
H You can change channels in several ways.
Method 1
Using CH a/s on the remote
control unit or on the TV set.
Method 2
(i) Press FLASHBACK
to switch to the previously tuned channel.
(ii) Press FLASHBACK
again to switch back to the currently tuned channel.
Note:
FLASHBACK will not work if no channel has been changed after TV is turned on.
Method 3
Using REMOTE KEYPAD buttons (0-9 and ENTER) to select up to 125 channels for VHF/UHF/
CATV.
To select a 1 or 2-digit analog channel number (e. g., Channel 5):
Press 5 ENTER
Note:
When selecting a 1-digit channel number, it is not necessary to press 0 before the number.
When you enter 0-9 only, channel selection will be made if there is no operation for a few seconds.
To select a 3-digit analog channel number (e. g., Channel 115):
Press 1 1 5 ENTER
Note:
When you enter 0-9 only, channel selection will be made if there is no operation for a few seconds.
If you push “0” by itself, nothing will happen.
To select a digital channel number (e. g. Channel 10.1):
Press 1 0 • (DOT) 1 ENTER
Note:
Complete the above steps within a few seconds.
When you enter 0-9 and (DOT), channel selection will be made if there is no operation for a few
seconds.
VOLUME
(

)/(
)
CHANNEL
UP ( )/
DOW
N ( )
MEN
U
CH
CH
FLASHBAC
K
5 5
1
11 11 5
(On the Set)
MENU
button
1 10 10.
AUDIO: ENGLISH
10.1
DIGITAL
10. 1
AUDIO: ENGLISH
10.1
DIGITAL




(while viewing
digital channel)
(while viewing analog channel)
12-14.indd 12 11/24/05 8:45:16 AM
13
Dimension: 140 X 215 mm
The language for the ON SCREEN DISPLAY can be set to ENGLISH, SPANISH or FRENCH.
1 Press MENU to access the MAIN MENU screen.
2 Press CH a/s to move the E mark to “SET UP”.
3 Press VOL k/l to access the SET UP screen, then press CH a/s
to move the “
E mark to “LANGUAGE”.
4 Press VOL k/l to access the LANGUAGE select screen.
5 Press CH a/s to select “ENGLISH”, “ESPAÑOL (SPANISH)” or
“FRANCAIS (FRENCH)”.
6 Press MENU to exit.
Sleep Timer
You can preset your television to turn off automatically in increments of 30, 60, 90 or 120
minutes.
1 Press MENU to access the MAIN MENU screen.
2 Press VOL k/l to access the SLEEP TIMER screen.
3 Press VOL k/l to set a sleep time of 30, 60, 90 or 120 minutes.
4 Press MENU to exit.
Language
(SLEEP TIMER screen)
(LANGUAGE select screen)
(MAIN MENU screen)
(SET UP screen)
SL EEP T I MER
AUD I O SEL ECT
CLOSED CAPT I O
N
PARENT CONTRO
L
ENERGY
SET UP
SAVE
V I DEO ADJ US
T
MENU
D I G I T A
L
AUD I O
CC
ES
SL EEP T I MER
AUD I O SEL ECT
CLOSED CAPT I O
N
PARENT CONTRO
L
ENERGY
SET UP
SAVE
V I DEO ADJ US
T
MENU
D I G I T A
L
AUD I O
CC
ES
SL EEP T I MER
AUD I O SEL ECT
CLOSED CAPT I O
N
PARENT CONTRO
L
ENERGY
SET UP
SAVE
V I DEO ADJ US
T
MENU
D I G I T A
L
AUD I O
CC
ES
ENGL I SH
FRAN
CA I S
ESP A
Ñ
OL
LAN
GUAGE
ENGL I SH
FRAN
CA I S
ESP A
Ñ
OL
I D I OMA
SLEEP T I MER
1 2 0M REMA I N
 
 

 
 
 
CH
CH
VOL
VOL
+
CH
CH
VOL
VOL
+
VOL
VOL
+
VOL
VOL
+
CH
CH
To turn off the SLEEP TIMER, repeat the above SLEEP TIMER steps and
select “– – – M REMAIN” during step 3.
While SLEEP TIMER is active, the time remaining will be briefly displayed on-screen at regularintervals or when the
Remote’s DISPLAY key is pressed twice. 5 minutes before the SLEEP TIMER turns off the TV, the screen prompts the
time remaining for 4 seconds. The SLEEP TIMER shows a similar display for each remaining minute and a 10-second
display right before shutting off the TV.
If you turn the POWER OFF, the SLEEP TIMER will automatically reset.
12-14.indd 13 11/24/05 8:45:18 AM
14
Dimension: 140 X 215 mm
1 Press MENU to access the MAIN MENU screen.
2 Press CH a/s to move the “E mark to “VIDEO ADJUST”.
3 Press VOL k/l to access the PICTURE adjust screen.
The word “DIGITALwill appear to show viewing channel is a
digital channel.
4 Press CH a/s to select the desired adjustment item. (Refer to the diagram below.)
5 Press VOL k/l to adjust the setting.
6 Repeat steps 4 to 5 to adjust other settings.
7 Press MENU to exit.
Note:
VIDEO ADJUST setting, once set, is shared among AIR/CABLE, INPUT 1, INPUT 2, and INPUT 3
modes.
VIDEO ADJUST setting for INPUT 3 when used as COMPONENT can be set independently.
VIDEO ADJUST setting for Digital Channel can be set independently.
(PICTURE adjust screen)
(MAIN MENU screen)
Video Adjust
PICTURE
TINT
COLO
R
SHARP
COLOR TEMP
.
RESET
: CH s
: CH a
BRIGHT
P I CTURE 50
D I G I T A
L
P I CTURE 50
D I G I T A
L
VOL k
increases contrast
VOL l
decreases contrast
SL EEP T I MER
AUD I O SEL ECT
CLOSED CAPT I O
N
PARENT CONTRO
L
ENERGY
SET U
P
SAVE
V I DEO ADJ UST
MENU
D I G I T A
L
AUD I O
CC
ES
VOLUME
(

)/(
)
CHANNEL
UP ( )/
DOW
N ( )
MEN
U

VOL
VOL
+
CH
CH
VOL
VOL
+
Selected item VOL
k
button VOL
l
button
PICTURE To increase contrast To decrease contrast
TINT To make skin tones greenish To make skin tones purplish
COLOR To increase color intensity To decrease color intensity
BRIGHT To increase brightness To decrease brightness
SHARP To increase sharpness To decrease sharpness
COLOR TEMP. To choose a LOW, ML, MH or HIGH color tone.
RESET To return all adjustments to factory preset levels.
CH
CH
12-14.indd 14 11/24/05 8:45:20 AM
15
Dimension: 140 X 215 mm
H MTS (Multichannel TV Sound) (For Analog Channel only)
This function allows reception of stereo or bilingual TV sound.
You can enjoy Hi-Fi stereo sound or SAP broadcasts where available.
Stereo broadcasts
Live television broadcasts of sports, shows, concerts, etc. can be received in dynamic stereo
sound.
SAP broadcasts
Television broadcast can be received with either MAIN or SAP sound.
MAIN sound: The normal program soundtrack. (Monaural or stereo where available.)
SAP sound: Second language, supplementary commentaries, etc. (SAP sound is monaural.)
If stereo sound is difficult to hear;
You can obtain clearer sound by manually switching to fixed monaural mode.
H SPEAKER (Internal Speaker Switch)
This function turns the TV’s internal speakers “ON” or “OFF” when listening to sound from
external speakers by using the AUDIO OUTPUT Terminals. (See page 42).
H FAO (Fixed Audio Output)
This function turns the TV’s internal speakers “OFF” and allows fixed audio output from the
AUDIO OUTPUT Terminals. (See page 42). With FAO, the TVs volume control is disabled.
1 Press MENU to access the MAIN MENU screen.
2 Press CH a/s to move the “E mark to “AUDIO SELECT”.
3 Press VOL k/l to access the AUDIO SELECT screen.
4 Press CH a/s to move the E mark to “MTS”, “SPEAKER”, “FAO”
or “AUDIO ADJUST”.
Note:
• If the viewing channel is a digital
channel, MTS cannot be selected.
5 Press VOL k/l to select “STEREO”, “SAP” or “MONO” when the
E mark is at “MTS” position.
Audio Select
SL EEP T I MER
AUD I O SEL ECT
CLOSED CAPT I O
N
PARENT CONTROL
ENERGY
SET UP
SAVE
V I DEO ADJ US
T
MENU
D I G I T A
L
AUD I O
CC
ES
AU I OD SE ECTL
SPEAKE
R
MT
S
FA
O
: OFF
: ON
: STERE
O
AUD I D J US
TO
A
AU I OD SE ECTL
SPEAKE
R
MT
S
FA
O
: OFF
: ON
: STERE
O
AUD I D J US
TO
A
VOL
VOL
+
(MAIN MENU screen)
(AUDIO SELECT screen)
(AUDIO SELECT screen)
MTS
STEREO
SAP
MONO
SPEAKER
ON
OFF
FAO
ON
OFF
CH
CH
VOL
VOL
+
CH
CH
(For Analog
Channel only)
15-17.indd 15 11/23/05 11:15:28 AM
16
Dimension: 140 X 215 mm
21
STEREO
SA
P
ON
ON
A I
R
A I
R
MONO
H AUDIO ADJUST
When the “E” mark is at “AUDIO ADJUST”, press VOL k/l to
access the AUDIO ADJUST screen. To access the desired item,
press CH a/s. To adjust the audio setting, press VOL k/l.
6 Press MENU to exit.
An example screen displaying ON AIR Analog Channel when receiving stereo broadcasts
Current channel number
ON AIR” will appear next to STEREO or
SAP when receiving STEREO or SAP
broadcasts.
Note:
• Once MONO mode is selected, the TV sound remains monaural even if the TV set receives a stereo
broadcast. You must switch the mode back to STEREO if you want to hear stereo sound again.
• Selecting MTS while receiving video signals from INPUT terminals does not change the type of sound;
in this case, sound is determined by the video source.
• If “FAO” mode is on, “SPEAKER” mode will automatically turn off. Changing “SPEAKER” setting will
not affect “FAO” mode.
Audio Select (Continued)
(Analog CHANNEL call on screen)
TREBLE
RESET
BASS
BALANCE
Selected item VOL k button VOL l button
TREBLE To increase treble response. To decrease treble response.
BASS To increase bass response. To decrease bass response.
BALANCE To emphasize the right To emphasize the left
speaker’s volume. speaker’s volume.
RESET To return all adjustments to factory preset levels.
TREBL E
0
15-17.indd 16 11/23/05 11:15:29 AM
17
Dimension: 140 X 215 mm
Digital Audio
This feature allows you to select the Primary and Secondary language and as well the type of
audio transmitted in a digital broadcast. If the viewing channel is an analog channel, Digital
Audio cannot be selected.
1 Press MENU to access MAIN MENU screen.
2 Press CH a/s to move the E mark to “DIGITAL AUDIO”.
Note:
5 Press MENU to exit.
SLEEP T IMER
AUDI O SELECT
CLOSED CAPT I ON
PARENT CONTROL
ENERGY
SET UP
SAVE
VIDEO ADJUST
MENU
DIGITAL
AUD I O
CC
ES
(MAIN MENU screen)
(DIGITAL AUDIO screen)
VOL
VOL
+
CH
CH
VOL
VOL
+
CH
CH
27SF560(16-18).p65 25/11/05, 5:23 PM18
SECONDARY LANGUAGE : OFF
PRIMARY LANGUAGE : ENGLISH
AUDIO PREFERENCE
ENGLISH
ESPAÑOL
FRANCAIS
PRIMARY LANGUAGE
ENGLISH
ESPAÑOL
FRANCAISOFF
SECONDARY LANGUAGE
The language which is selected in Primary Language will not appear in Secondary Language selection
mode.
AUDIO SERVICE 2
AUDIO SERVICE 3
AUDIO SERVICE 1
AUDIO SERVICE
AUDIO SERVICE
AUDIO PREFERENCE
DIGITAL AUDIO
AUDIO SERVICE: The type of audio transmitted in a digital broadcast signal.
In additional, it is possible for multiple audio tracks to accompany a signal video track.
H AUDIO PREFERENCE
(i) Press CH a/s to select “PRIMARY LANGUAGE” or
“SECONDARY LANGUAGE”.
(ii) Press VOL k/l to change the setting.
H AUDIO SERVICE
(i) Press CH a/s to select the AUDIO SERVICE. Six kinds
of audio service are available to be selected. However,
selectable service are depands on the programs contains.
The services are toggles as shown on below:
If a program has three services, audio service toggles
like below:
H AUDIO SERVICE
(i) Press CH a/s to select the AUDIO SERVICE. Six kinds
of audio service are available to be selected. However,
selectable service are depands on the programs contains.
The services are toggles as shown on below:
If a program has three services, audio service toggles
like below:
AUDIO
SERVICE 1
AUDIO
SERVICE 2
AUDIO
SERVICE 3
AUDIO
SERVICE 4
AUDIO
SERVICE 5
AUDIO
SERVICE 6
AUDIO
SERVICE 1
AUDIO
SERVICE 2
AUDIO
SERVICE 3
3 Press VOL k/l to access the DIGITAL AUDIO screen.
4 Press CH a/ s to select Audio Service or Audio
Preference”, then press VOL k/l to access to the selected
mode.
18
Dimension: 140 X 215 mm
How to set CLOSED CAPTION
• Your TV is equipped with an internal Closed Caption decoder. “Closed
Caption” is a system which allows conversations, narration, and sound
effects in TV programs and home videos to appear as captions on the
TV screen (see the illustration).
• Not all the programs and videos will offer closed captioning. Please
look for the ” symbol to ensure that captions will be shown.
• Closed Caption broadcast for Analog Channel can be viewed in
two modes: CAPTION and TEXT. For each mode, two channels are
available, CH1 and CH2.
Closed Caption broadcast for Digital Channel can be viewed in 10
modes (maximum).
The CAPTION mode shows subscripts of dialogs and commentaries
of TV dramas and news programs while allowing clear view of the
picture.
The TEXT mode displays over the picture other various information
(such as TV program schedule, weather forecast, etc.) that is
independent of the TV programs.
H During viewing analog channel
1 Press MENU to access the MAIN MENU screen.
2 Press CH a/s to move the E mark to “CLOSED CAPTION”.
3 Press VOL k/l to access the CLOSED CAPTION setting
screen.
4 Press CH a/s to move the E mark to either MODE or
“DATA”.
5 Press VOL k/l to change the CLOSED CAPTION setting.
6 Press MENU to exit.
CLOSED
MODE
CAP T I ON
: CAP T I ON
DATA
: CH 1
CC
DATA : CH 1
: CAP T I ONMODE
CLOSED
CAPT I ON
CC
CLOSED
MODE
CAP T I ON
: CAP T I ON
DATA
: CH 1
CC
SL EEP T I MER
AUD I O SEL ECT
CLOSED CAPT I O
N
PARENT CONTROL
ENERGY
SET UP
SAVE
V I DEO ADJ US
T
MENU
D I G I T A
L
AUD I O
CC
ES
VOLUME
(
)/(
)
CHANNEL
UP ( )/
DOW
N ( )
MEN
U


VOL
VOL
+
CH
VOL
VOL
+
Closed Caption
(MAIN MENU screen)
(CLOSED CAPTION setting screen)
CH
CH
CAPTION
MODE:
TEXT
OFF
CH 1
DATA:
CH 2
18-22.indd 18 11/23/05 11:59:04 AM
CH
19
Dimension: 140 X 215 mm
Closed Caption (Continued)
H During viewing digital channel
Note:
Closed Caption may malfunction (white blocks, strange characters, etc.) if signal conditions are poor
or if there are problems at the broadcast source. This does not necessarily indicate a problem with
your TV.
If any button is pressed to call up the ON SCREEN DISPLAY while viewing a CLOSED CAPTION
broadcast, the closed captions will disappear momentarily.
If no TEXT broadcast is being received while viewing in the TEXT mode, the screen may become
dark and blank for some programs. Should this occur, switch the Closed Caption mode to “OFF”.
(CLOSED CAPTION screen)
CH
CH
VOL
VOL
+
RESET
CLOSED CAPTION PREFERENCE
FONT SIZE : DEFAULT
FONT COLOR : DEFAULT
BACKGROUND COLOR : DEFAULT
ABC 123
RESET
CLOSED CAPTION PREFERENCE
FONT SIZE : DEFAULT
FONT COLOR : DEFAULT
BACKGROUND COLOR : DEFAULT
ABC 123
VOL
VOL
+
27SF560(19-23).p65 23/11/05, 11:29 AM20
(CLOSED CAPTION SERVICE screen)
1 Repeat steps 1 to 2 of During viewing analog channel.
2 Press VOL k/l to access the CLOSED CAPTION screen.
3 Press CH a/s to select “CLOSED CAPTION SERVICE”
or “CLOSED CAPTION PREFERENCE” and then press
VOL k/l to enter to the selected mode screen.
H CLOSED CAPTION SERVICE
(i) Press CH a/s to select “CLOSED CAPTION
SERVICE”.
Closed caption services toggles like below:
H CLOSED CAPTION PREFERENCE
(i) Press CH a/s to select “FONT SIZE”, “FONT
COLOR”, “BACKGROUND COLOR” or “RESET ”.
(ii) Press VOL k/l to select desired setting.
The setting toggles as shown below:
RESET
For resetting all adjustment items to the factory preset
values.
STANDARD
DEFAULT
SMALL
LARGE
FONT SIZE
STANDARD
DEFAULT
SMALL
LARGE
FONT SIZE
DEFAULT
Translucent
White Black
Blue
Green Red
FONT COLOR/BACKGROUND COLOR
DTV CC1
DTV CC2
DTV CC3
DTV CC4 DTV CC5
TEXT 2
TEXT 1
CC 2
CC 1
DTV CC6
OFF
RESET
CLOSED CAPTION PREFERENCE
FONT SIZE : DEFAULT
FONT COLOR : DEFAULT
BACKGROUND COLOR : DEFAULT
ABC 123
SELECT SERVICE : OFF
Good Morning! How are you today?
CLOSED CAPTION SERVICE
CLOSED CAPTION SERVICE
CLOSED CAPTION PREFERENCE
CLOSED CAPTION
20
Dimension: 140 X 215 mm
1. User setting 2. Block table
PG
age
based
not to
block
not to
block
not to
block
Select
block
auto-
block
auto-
block
G
G
PG
PG-13
R
NC-17
X
BLOCK
BLOC
K
BLOC
K
PG-13
R
NC-17
X
Parent Control (V-CHIP Operation)
H V-CHIP
This function allows you to restrict TV programs and also allows you to control TV usage based on
FCC data. This function is to prevent your children from watching violence or sexual scenes that may
be harmful.
Restriction of TV programs includes two characters that contain information about the program’s MPAA
rating and the TV Parental Guidelines. MPAA is restricted by age. TV Parental Guidelines are restricted
by age and contents.
Since a TV program may use either the MPAA rating, TV guidelines or canadian Rating System, you
should adjust all for complete control.
[1] MPAA RATING
1. User setting
2. Block table
PG
age
based
not to
block
not to
block
Select
block
auto-
block
auto-
block
auto-
block
G
G
PG
PG-13
R
NC-17
X
BLOCK
BLOC
K
BLOC
K
BLOC
K
PG-13
R
NC-17
X
age
based
Example 2:
“R” in the age-based rating is blocked, this will
automatically block the higher rating “NC-17”, “X”
also.
RATING
G GENERAL AUDIENCES. All ages admitted.
PG PARENTAL GUIDANCE SUGGESTED. Some material may not be suitable for
children.
PG-13 PARENTS STRONGLY CAUTIONED. Some material may be inappropriate for
children under 13.
R RESTRICTED. Under 17 requires accompanying parent or adult guardian.
NC-17 NO ONE 17 AND UNDER ADMITTED.
X X Rating is an older rating that is unified with NC-17 but may be encoded on
older movie’s data.
Note:
MPAA RATING
Example 1:
“PG-13” in the age-based rating is blocked, this
will automatically block the higher ratings “R”,
“NC-17”, “X” also.
Note:
• MPAA RATING is only age-based.
[2] TV PARENTAL GUIDELINES
content based
AGE D L S V FV
(Sexually (Adult (Sexual (Violence) (Fantasy
Suggestive Language) Situation) Violence)
Dialog)
TV-Y (All children)
V
TV-Y7 (Direct to Older Children)
V
V
TV-G (General Audience)
V
TV-PG (Parental Guidance
V
V
V
V
V
Suggested)
TV-14 (Parents Strongly
V
V
V
V
V
Cautioned)
TV-MA (Mature Audience Only)
V
V
V
V
age
based
V
: Content Rating can be set.
l : Content Rating cannot be set (not normally broadcast by TV station).
RATING
18-22.indd 20 11/23/05 11:59:10 AM
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54

Sharp 32SC260 Operation Manual Manuel utilisateur

Catégorie
Téléviseurs CRT
Taper
Manuel utilisateur
Ce manuel convient également à