![](//vs1.manuzoid.fr/store/data-gzf/b475b2aa9347f9c0b68e5fd7d46faa27/2/000531045.htmlex.zip/bgb.jpg)
English - 11
Plug & Play
0%
Services found: 0 Channel:
-
Enter
Skip
Start
Plug & Play
Scanning for digital services...
29%
Services found: 6 Channel: 35
Enter
Skip
Stop
OK
Enjoy your viewing
7 Select No pressing the ◄ or ► button, then press the ENTER
button. Auto Store menu is displayed.
8 Press the ENTER button to start search the channels. The
channel search will start and end automatically. After all the
available channels are stored, Clock Set menu is automatically
displayed. Press the ENTER button.
To stop the search before it has finished, press the
ENTER button with Stop selected.
9 Press the ◄ or ► button to select Month, Day, Year, Hour, or
Minute. Set these by pressing the ▲ or ▼ button.
You can set the Month, Day, Year, Hour, or Minute
directly by pressing the numeric buttons on the remote
control.
10 Press the ENTER button to confirm your setting. The message
Enjoy your viewing is displayed. When you have finished,
press the ENTER button.
Even if the ENTER button is not pressed, the message will
automatically disappear after several seconds.
11 Select Yes pressing the ◄ or ► button, then press the
ENTER button. Auto Store menu is displayed.
12 Press the
ENTER button to start search the analog channels.
The analog channel search will start and end automatically.
After all the available analog channels are stored, the screen
for searching digital channels is automatically displayed.
To stop the search before it has finished, press the
ENTER button with Stop selected.
13 Press the
ENTER button to start search the digital channels.
The digital channel search will start and end automatically.
After all the available digital channels are stored, the screen to
select a time zone is displayed depending on the country.
To stop the search before it has finished, press the
ENTER button with Stop selected.
If the DTV channel is updated, the Source in the source
list of the Input menu is automatically changed to DTV.
For detailed descriptions about DTV channel update, refer
to page 33 of this manual.
14 Press the ▲ or ▼ button to select required time zone, then
press the ENTER button. The screen for setting the time is
displayed. Press the ENTER button.
15 Press the ◄ or ► button to select Month, Day, Year, Hour, or
Min. Set these by pressing the ▲ or ▼ button.
You can set the Month, Day, Year, Hour, or Min directly
by pressing the numeric buttons on the remote control.
16 Press the
ENTER button to confirm your setting. The message
Enjoy your viewing is displayed. When you have finished,
press the ENTER button.
Even if the ENTER button is not pressed, the message will
automatically disappear after several seconds.
If you want to reset this feature …
1
Press the MENU button to display the menu.
2 Press the ▲ or ▼ button to select Setup, then press the
ENTER button.
3 Press the ENTER button again to select Plug & Play.
The message Start Plug & Play is displayed.
Plug & Play
Set the current time.
Adjust Move Enter Skip
15
Month Day Year
Hour Min
2008
12 00
01
Plug & Play
Move
Select
Skip
The Iberian Peninsula and Balears Islands
Canarian Islands
<Spain only>
Plug & Play
Clock Set
Move
Adjust
Enter
15
Month Day Year
Hour Min
2008
12 00
01
Move Enter Return
Plug & Play
Language : English
Time
Auto Wall-Mount
Melody : Off
Entertainment
: Off
Energy Saving :
Off
PIP
Setup
T V
BN68-01768A.indb 11 2009-01-22 오후 2:56:29