VTech SN7021 Manuel utilisateur
- Catégorie
- Téléphones
- Taper
- Manuel utilisateur
Congratulations
on purchasing your new VTech product.
Before using this product, please read
Important safety instructions.
This user’s manual has instructions on how
to set up and register your new Audio
doorbell. For instructions on using the
Audio doorbell, see the Quick start guide
or the online Complete user’s manual of
your telephone system.
For support, shopping, and everything
new at VTech, visit our website at
www.vtechphones.com. In Canada, visit
www.vtechcanada.com.
What’s in the box
Your product package contains the
following items. Save your sales receipt and
original packaging in the event warranty
service is necessary.
Test the signal strength
You can mount the Audio doorbell on a
wall.
Before you mount the Audio doorbell,
follow the instructions below to check
the signal strength between the Audio
doorbell and the telephone base. Make
sure you mount the device in a location
where the signal strength is good.
Test device signal strength with your
SN5127/SN5147 telephone
1. Press MENU on the cordless handset
when the telephone is not in use.
2. Press or to scroll to Set device, and
then press SELECT.
3. Press SELECT again to select Check
signal.
4. Scroll to select DOORBELL X
(X represents the device number
assigned to the doorbell) and then press
SELECT.
5. While the handset screen displays
Awaiting signal, press on the front of
the Audio doorbell.
6. When the handset screen displays Good
signal, press SELECT. The testing is
complete.
• If the handset screen displays No
signal, press SELECT. Make sure the
doorbell is powered on with the
batteries, and then repeat from step 1
to test again.
• If the handset screen displays Weak
signal, press SELECT. Then, move the
Audio doorbell closer to the base,
and then adjust the Audio doorbell’s
location to improve the signal. Repeat
from step 1 to test again.
For detailed operations, read the Audio
doorbell section in the Quick start guide or
the online Complete user’s manual of your
telephone system.
Mount the Audio doorbell
• The types of screws and anchors you need
depend on the composition of the wall.
You may need to purchase the screws and
anchors separately to mount your doorbell.
Install doorbell wall mount cover
Attach the wall mount cover to the wall:
1. Use a pencil to mark two holes on the
desired location. Then remove the
wall mount cover and drill two holes in
the wall. Check for reception strength
before drilling the holes.
2. If you drill the holes into a stud, go to
step 3.
-OR-
If you drill the holes into an object other
than a stud, insert the wall anchors into
the holes and tap gently on the ends
with a hammer until the wall anchors are
flush with the wall.
User’s manual
SN7021
Cordless Audio Doorbell
for use with
VTech SN5127/SN5147
telephone system
Go to www.vtechphones.com
to register your product for enhanced
warranty support and the latest VTech
product news.
User’s
manual
Overview
1
2
3
4
6
5
1 – Microphone
2 – LED light
• Flashes when the doorbell is chimed
or in pairing mode.
3 – Chime button
• Press to send a chime tone and
notification to the cordless handset
and telephone base.
4 – Speaker
5 – Wall mount cover
1
2
3
4
6
5
6– Pair button
• Press and hold to enter pairing
mode.
Install the battery
Install doorbell batteries
• Use only the batteries provided or equivalent.
• If the doorbell will not be used for a long
time, disconnect and remove the batteries to
prevent possible leakage.
1. Use a slot type screwdriver to loosen the
screw at the bottom of the Audio doorbell.
2. Pull the wall mount cover of the Audio
doorbell downward, and then detach it from
the doorbell.
3. Insert the supplied batteries into the battery
compartment, and match the polarity
markings (+ and -) inside it.
• Register the Audio doorbell to your
telephone base before closing the wall
mount cover and tightening the screw at the
bottom of the Audio doorbell. Refer to the
Add and register an Audio doorbell section
in this user’s manual.
Before use
Add and register an Audio doorbell
Register each new SN7021 Audio doorbell
to your SN5127/SN5147 telephone base
before use. Your telephone system
supports a maximum of two Audio
doorbells.
• Install the supplied batteries before
registering the Audio doorbell to the
telephone base.
To register an Audio doorbell to the
SN5127 telephone base:
1. When the telephone is not in use,
press and hold PAGE at the telephone
base for about five seconds until the
visual ringer indicator light turns on.
Release PAGE.
2. Press and hold the pair button on the
back of the Audio doorbell until the LED
light at the front flashes, then release it.
It takes up to 60 seconds to complete
the registration. When the registration is
successful, the LED light on the front of the
Audio doorbell turns to steady on, and the
telephone base beeps and its visual ringer
indicator light turns off.
If registration fails, start again from Step 1
above.
• You cannot register an Audio doorbell if any
other system device is in use.
To register an Audio doorbell to the
SN5147 telephone base:
1. When the telephone is not in use,
press and hold at the telephone
base for about five seconds until the
visual ringer indicator light turns on.
Release .
2. Press and hold the pair button on the
back of the Audio doorbell until the LED
light at the front flashes, then release it.
It takes up to 60 seconds to complete
the registration. When the registration is
successful, the LED light on the front of the
Audio doorbell turns to steady on, and the
telephone base beeps and its visual ringer
indicator light turns off.
If registration fails, start again from Step 1
above.
• You cannot register an Audio doorbell if any
other system device is in use.
Close the wall mount cover
After you have registered your Audio
doorbell to the telephone base:
1. Close the wall mount cover and push it
upward until it is securely in place.
2. Tighten the screw at the bottom of the
wall mount cover.
• If you choose to mount the Audio doorbell
on a wall, refer to Test the signal strength
and Mount the Audio doorbell sections in
this user’s manual before closing the wall
mount cover.
Operating range
The operating range of the Audio doorbell
is up to 1,000 feet outdoors or 150 feet
indoors. The actual operating range may
vary depending on the environmental
conditions and other interferences such as
walls, doors and other obstructions.
3. Align the holes on the wall mount cover
with the holes on the wall (or stud).
Tighten the screws into the holes to
secure the wall mount cover onto the
wall.
Install doorbell
Attach the doorbell to the wall mount
cover on the wall:
1. Align the doorbell with the slots on the
wall mount cover.
2. Attach the doorbell to the wall mount
cover, and then push the doorbell
downward gently until it is sealed tightly.
3. Tighten the screw into the threaded
socket at the bottom to secure.
Replace an Audio doorbell
You can deregister an Audio doorbell, or
deregister all devices when you want to:
• Replace an old Audio doorbell with a
new one;
• Reassign the designated number of your
Audio doorbell; or
• Register your Audio doorbell to another
telephone system.
To deregister an Audio doorbell or
deregister all devices:
Using a cordless handset when it is not in
use:
1. Press MENU on the handset, and then
press *33734#.
2. When the DEREGISTER menu options
display:
• Press SELECT to select All sensors. All
devices will be deregistered.
-OR-
• Scroll to Single sensor and then press
SELECT. Then, select the desired
device and then press SELECT to
deregister that device.
3. To register any devices back to the
telephone base, refer to the user’s
manuals of your SN5127/SN5147
telephone.
General product care
To keep this product working well and looking
good, follow these guidelines:
• Avoid putting it near heating appliances and
devices that generate electrical noise (for
example, motors or fluorescent lamps).
• DO NOT expose it to direct sunlight or
moisture.
• Avoid dropping the product or treating it
roughly.
• Clean with a soft cloth.
• DO NOT immerse the Audio doorbell in water
and do not clean them under the tap.
• DO NOT use cleaning spray or liquid cleaners.
• Make sure the Audio doorbell is dry before
you connect it to the mains again.
Storage
When you are not going to use the Audio
doorbell for some time, remove the batteries
from the Audio doorbell. Store the Audio
doorbell in a cool and dry place.
SN5127 base SN5147 base
• Batteries should not be exposed to excessive
heat such as bright sunshine or fire.
• Do not dispose of the batteries in a fire.
Check with local waste management codes
for special disposal instructions.
• Do not open or mutilate the batteries.
Released electrolyte is corrosive and may
cause burns or injury to the eyes or skin. The
electrolyte may be toxic if swallowed.
• Exercise care in handling batteries in order
not to create a short circuit with conductive
materials.
Precautions for users of implanted cardiac
pacemakers
Cardiac pacemakers (applies only to digital
cordless devices):
Wireless Technology Research, LLC (WTR),
an independent research entity, led a
multidisciplinary evaluation of the interference
between portable wireless devices and
implanted cardiac pacemakers. Supported by
the U.S. Food and Drug Administration, WTR
recommends to physicians that:
Pacemaker patients
• Should keep wireless devices at least six
inches from the pacemaker.
• Should NOT place wireless devices directly
over the pacemaker, such as in a breast
pocket, when it is turned ON.
WTR’s evaluation did not identify any risk
to bystanders with pacemakers from other
persons using wireless devices.
Electromagnetic fields (EMF)
This VTech product complies with all standards
regarding electromagnetic fields (EMF).
If handled properly and according to the
instructions in this user’s manual, the product
is safe to be used based on scientific evidence
available today.
FCC and IC regulations
FCC Part 15
NOTE: This equipment has been tested and
found to comply with the requirements for
a Class B digital device under Part 15 of the
Federal Communications Commission (FCC)
rules. These requirements are intended to
provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there is
no guarantee that interference will not occur
in a particular installation. If this equipment
does cause harmful interference to radio or
television reception, which can be determined
by turning the equipment off and on, the user
is encouraged to try to correct the interference
by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the
equipment and receiver.
• Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/
TV technician for help.
WARNING: Changes or modifications to this
equipment not expressly approved by the
party responsible for compliance could void
the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC
rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference
that may cause undesired operation.
To ensure safety of users, the FCC has
established criteria for the amount of radio
frequency energy that can be safely absorbed
by a user or bystander according to the
intended usage of the product. This product
has been tested and found to comply with
the FCC criteria. The Audio Doorbell shall
be installed and used such that parts of all
persons’ body are maintained at a distance of
approximately 20 cm (8 inches) or more.
Frequently asked questions
Below is the question most frequently asked
about the Audio doorbell. If you cannot find the
answer to your question in the below table, visit
our website at www.vtechphones.com or call
1 (800) 595-9511 for customer service. In
Canada, go to www.vtechcanada.com or call
1 (800) 267-7377.
The Audio
doorbell
doesn’t work
with the
telephone
system
equipment.
Make sure the AA batteries
ares installed.
The Audio doorbell may
be deregistered from your
telephone system. Refer to
Add and register an Audio
doorbell and register the
Audio doorbell back.
The Audio doorbell may be
out of range. Place or install
the doorbell closer to the
telephone system.
If the above suggestions
do not work, deregister the
doorbell and register it to
the telephone base again.
Important safety instructions
When using your Audio doorbell, basic safety
precautions should always be followed to
reduce the risk of fire, electric shock and injury,
including the following:
1. Read and understand all instructions.
2. Follow all warnings and instructions marked
on the product.
3. Unplug this product from the wall outlet
before cleaning. Do not use liquid or aerosol
cleaners. Use a dry non-abrasive cloth for
cleaning.
4. Do not use this product near water such as
near a bath tub, wash bowl, kitchen sink,
laundry tub or a swimming pool, or in a wet
basement or shower.
5. Do not place this product on an unstable
table, shelf, stand or other unstable surfaces.
6. Avoid placing the device in places with
extreme temperature, direct sunlight, or
other electrical devices. Protect your Audio
Doorbell from moisture, dust, corrosive
liquids and fumes.
7. This product should not be placed in
any area where proper ventilation is not
provided. Slots and openings in the back
or bottom of this product are provided
for ventilation. To protect them from
overheating, these openings must not be
blocked by placing the product on a soft
surface such as a bed, sofa or rug. This
product should never be placed near or
over a radiator or heat register.
8. This product should be operated only from
the type of power source indicated on the
marking label. If you are not sure of the type
of power supply in your home, consult your
dealer or local power company.
9. Do not allow anything to rest on the power
cord. Do not install this product where the
cord may be walked on.
10. Never push objects of any kind into this
product through the slots because they may
touch dangerous voltage points or create a
short circuit. Never spill liquid of any kind on
the product.
11. To reduce the risk of electric shock, do not
disassemble this product, but take it to
an authorized service facility. Opening or
removing parts of the Audio Doorbell other
than specified access doors may expose
you to dangerous voltages or other risks.
Incorrect reassembling can cause electric
shock when the product is subsequently
used.
12. Do not overload wall outlets and extension
cords.
13. Unplug this product from the wall outlet
and refer servicing to an authorized service
facility under the following conditions:
• When the power supply cord or plug is
damaged or frayed.
• If liquid has been spilled onto the
product.
• If the product has been exposed to rain
or water.
• If the product does not operate normally
by following the operating instructions.
Adjust only those controls that are
covered by the operation instructions.
Improper adjustment of other controls
may result in damage and often requires
extensive work by an authorized
technician to restore the product to
normal operation.
• If the product has been dropped or
damaged.
• If the product exhibits a distinct change in
performance.
14. Avoid using the product during an electrical
storm. There is a remote risk of electric shock
from lightning.
15. Periodically examine all components for
damage.
16. CAUTION: Use only the batteries indicated in
this manual. There may be a risk of explosion
if a wrong type of battery is used for the
Audio Doorbell. Do not dispose of batteries
in a fire. They may explode.
SAVE THESE INSTRUCTIONS
Battery
• CAUTION: To prevent risk of fire or battery
explosion, replace with the correct battery
type.
• Dispose of used batteries according to the
instructions.
This Class B digital apparatus complies with
Canadian requirement:
CAN ICES-3 (B)/NMB-3(B)
Industry Canada
This device complies with Industry Canada
licence-exempt RSS standard(s).
Operation is subject to the following two
conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference
that may cause undesired operation.
The term ‘’IC:‘’ before the certification/
registration number only signifies that the
Industry Canada technical specifications were
met.
This product meets the applicable Innovation,
Science and Economic Development Canada
technical specifications.
RF radiation exposure statement
The Audio Doorbell complies with FCC
RF radiation exposure limits set forth for
an uncontrolled environment. The Audio
Doorbell should be installed and operated
with a minimum distance of 20 cm (8 inches)
between the Audio Doorbell and all persons’
body. Use of other accessories may not ensure
compliance with FCC RF exposure guidelines.
This transmitter must not be co-located or
operating in conjunction with any other antenna
or transmitter. This equipment complies also
with Industry Canada RSS-102 with respect
to Canada’s Health Code 6 for Exposure of
Humans to RF Fields.
For C-UL compliance only
Mesures de sécurité importantes
Lorsque vous utilisez votre appareil, vous
devriez toujours suivre certaines mesures de
précaution de base afin de réduire les risques
d’incendie, d’électrocution et de blessures
corporelles, dont ceux qui suivent :
1. Lisez et comprenez bien toutes les
instructions.
2. Observez toutes les instructions et mises en
garde inscrites sur l’appareil.
3. Débranchez ce produit de la prise de
courant avant de procéder au nettoyage.
N’utilisez pas de nettoyants en aérosols.
Utilisez un chiffon humide pour le nettoyer.
4. N’utilisez pas ce produit près de l’eau, tel
que près d’un bain, d’un lavabo, d’un évier
de cuisine, d’un bac de lavage ou d’une
piscine, ou dans un sous-sol humide ou sous
la douche.
5. Ne placez pas cet appareil sur un chariot,
support ou table chancelants. L’appareil
pourrait tomber et être sérieusement
endommagé.
6. Évitez d’installer le appareil dans les endroits
soumis à une température extrême, à la
lumière directe du soleil ou à proximité
immédiate d’autres appareils électriques
ou électroniques. Protégez votre appareil
contre les sources d’humidité, la poussière,
les vapeurs et les liquides corrosifs.
7. Le boîtier de l’appareil est doté de fentes
et d’ouvertures d’aération situées à
l’arrière ou en dessous. Afin d’empêcher la
surchauffe, ces ouvertures ne doivent pas
être obstruées en plaçant l’appareil sur un
lit, divan, tapis ou autre surface similaires.
Ne placez pas cet appareil à proximité d’un
élément de chauffage ni d’une plinthe
électrique. De plus, ne l’installez pas dans
une unité murale ou un cabinet fermé qui ne
possède pas d’aération adéquate.
8. Ne faites fonctionner cet appareil
qu’avec le type d’alimentation indiqué
sur les étiquettes de l’appareil. Si vous
ne connaissez pas le voltage de votre
maison, consultez votre marchand ou votre
fournisseur d’électricité.
9. Ne laissez aucun objet reposer ni appuyer
sur le cordon d’alimentation. N’installez pas
cet appareil dans un endroit oùê l’on risque
d’écraser le cordon d’alimentation ou de le
piétiner.
10. N’insérez jamais d’objets à travers les
fentes et ouvertures de cet appareil, car ils
pourraient toucher à des points de tension
dangereux ou court-circuiter des pièces,
ce qui constituerait un risque d’incendie ou
d’électrocution. N’échappez pas de liquides
dans l’appareil.
11. Afin de réduire les risques d’électrocution,
ne démontez pas l’appareil, mais apportez-le
plutôt à un centre de service qualifié s’il doit
être réparé. En enlevant le couvercle, vous
vous exposez à des tensions dangereuses
ou autres dangers similaires. Un remontage
inadéquat peut être à l’origine d’une
électrocution lors d’une utilisation ultérieure
de l’appareil. Débranchez l’appareil avant de
procéder au nettoyage. Utilisez un chiffon
humide et doux.
12. Ne surchargez pas les prises de courant et
les rallonges.
13. Débranchez cet appareil de la prise
de courant et communiquez avec le
département de service à la clientèle de
VTech dans les cas suivants:
• Lorsque le cordon d’alimentation est
endommagé ou écorché.
• Si du liquide a été échappé dans
l’appareil.
• Si l’appareil a été exposé à une source
d’humidité telle que la pluie ou l’eau.
• Si le produit ne fonctionne pas normale-
ment en respectant les instructions de
fonctionnement. Réglez uniquement les
commandes indiquées dans le les instruc-
tions de fonctionnement. Les réglages
incorrects des autres commandes pour-
raient provoquer un dommage qui pour-
rait exiger un travail exhaustif de la part
d’un technicien autorisé afin de rétablir le
fonctionnement normal de l’appareil.
• Si le produit a été échappé ou endom-
magé.
• Si le produit affiche une nette diminution
de sa performance.
14. Évitez d’utiliser l’appareil pendant un orage.
Les éclairs peuvent être à l’origine d’une
électrocution.
15. Examinez les composantes afin de vérifier si
celles-ci ne sont pas endommagées.
16. MISE EN GARDE : Il peut y avoir un risque
d’explosion si vous utilisez le mauvais type
de piles. Utilisez uniquement les piles
indiquées dans ce manuel. N’incinérez pas
les piles. Celles-ci risqueraient d’exploser.
CONSERVEZ CES INSTRUCTIONS
Pile
• MISE EN GARDE: Afin de prévenir les risques
d’incendie ou d’explosion de la pile, replacez
la pile avec une pile du même type.
• Jetez les piles épuisées en respectant les
instructions.
• Le bloc-piles ne doit pas être exposé la
chaleur excessive telle que la lumièêre du
soleil ou au feu.
• Ne jetez pas la pile au feu. Vérifiez les
instructions spécifiques de mise aux rebus
auprès des autorités locales.
• N’ouvrez pas et ne mutilez pas la pile.
L’électrolyte qui s’en échapperait est corrosif
et pourrait causer des brûlures ou des
blessures aux yeux ou à la peau. L’électrolyte
est toxique si avalé.
• Soyez prudents lorsque vous manipulez
les piles afin d’éviter les courts-circuits
provoqués par des matériaux conducteurs.
Stimulateurs cardiaques implantés dans
l’organisme
Les simulateurs cardiaques (s’applique
uniquement aux téléphones numériques sans
fil) :
L’organisme ‘Wireless Technology Research,
LLC (WTR)’, une firme de recherche
indépendante, a mené une évaluation
pluridisciplinaire des interférences entre les
téléphones sans fil portatifs et les stimulateurs
cardiaques implantés dans l’organisme.
Appuyée par l’Administration des aliments et
drogues (FDA) des États-Unis, la firme WTR
recommande aux médecins :
Avis aux détenteurs de stimulateurs cardiaques
• Vous devriez maintenir les dispositifs sans fil
au moins six pouces du simulateur cardiaque.
• Ils ne doivent PAS placer les dispositifs sans
fil directement sur le stimulateur cardiaque,
tel que dans une poche de chemise, lorsque
celui-ci est en marche.
L’étude effectuée par l’organisme WRS n’a
pas identifié de risque pour les détenteurs de
simulateurs cardiaques causés par les gens qui
utilisent un téléphone sans fil à proximité de
ceux-ci.
Limited warranty
What does this limited warranty cover?
The manufacturer of this VTech Product
warrants to the holder of a valid proof of
purchase (“Consumer” or “you”) that the
Product and all accessories provided in the
sales package (“Product”) are free from defects
in material and workmanship, pursuant to the
following terms and conditions, when installed
and used normally and in accordance with the
Product operating instructions. This limited
warranty extends only to the Consumer for
Products purchased and used in the United
States of America and Canada.
What will VTech do if the Product is not free
from defects in materials and workmanship
during the limited warranty period (“Materially
Defective Product”)?
During the limited warranty period, VTech’s
authorized service representative will repair
or replace at VTech’s option, without charge,
a Materially Defective Product. If we repair
the Product, we may use new or refurbished
replacement parts. If we choose to replace
the Product, we may replace it with a new or
refurbished Product of the same or similar
design. We will retain defective parts, modules,
or equipment. Repair or replacement of the
Product, at VTech’s option, is your exclusive
remedy. VTech will return the repaired or
replacement Products to you in working
condition. You should expect the repair or
replacement to take approximately 30 days.
How long is the limited warranty period?
The limited warranty period for the Product
extends for ONE (1) YEAR from the date
of purchase. If VTech repairs or replaces a
Materially Defective Product under the terms of
this limited warranty, this limited warranty also
applies to the repaired or replacement Product
for a period of either (a) 90 days from the date
the repaired or replacement Product is shipped
to you or (b) the time remaining on the original
one-year warranty; whichever is longer.
What is not covered by this limited warranty?
This limited warranty does not cover:
1. Product that has been subjected to misuse,
accident, shipping or other physical
damage, improper installation, abnormal
operation or handling, neglect, inundation,
fire, water or other liquid intrusion; or
2. Product that has been damaged due
to repair, alteration or modification by
anyone other than an authorized service
representative of VTech; or
3. Product to the extent that the problem
experienced is caused by signal conditions,
network reliability, or cable or antenna
systems; or
4. Product to the extent that the problem is
caused by use with non-VTech accessories;
or
5. Product whose warranty/quality stickers,
product serial number plates or electronic
serial numbers have been removed, altered
or rendered illegible; or
6. Product purchased, used, serviced, or
shipped for repair from outside the United
States of America or Canada, or used
for commercial or institutional purposes
(including but not limited to Products used
for rental purposes); or
7. Product returned without a valid proof of
purchase (see item 2 on the next page); or
8. Charges for installation or set up, adjustment
of customer controls, and installation or
repair of systems outside the unit.
How do you get warranty service?
To obtain warranty service in the USA, please
visit our website at www.vtechphones.com or
call 1 (800) 595-9511. In Canada, go to
www.vtechcanada.com or call 1 (800) 267-7377.
NOTE: Before calling for service, please review
the user’s manual - a check of the Product’s
controls and features may save you a service call.
Except as provided by applicable law, you
assume the risk of loss or damage during
transit and transportation and are responsible
for delivery or handling charges incurred in
the transport of the Product(s) to the service
location. VTech will return repaired or
replaced Product under this limited warranty.
Transportation, delivery or handling charges
are prepaid. VTech assumes no risk for damage
or loss of the Product in transit. If the Product
failure is not covered by this limited warranty, or
proof of purchase does not meet the terms of
this limited warranty, VTech will notify you and
will request that you authorize the cost of repair
prior to any further repair activity. You must pay
for the cost of repair and return shipping costs
for the repair of Products that are not covered
by this limited warranty.
What must you return with the Product to get
warranty service?
1. Return the entire original package and
contents including the Product to the VTech
service location along with a description of
the malfunction or difficulty; and
2. Include a “valid proof of purchase” (sales
receipt) identifying the Product purchased
(Product model) and the date of purchase or
receipt; and
3. Provide your name, complete and correct
mailing address, and telephone number.
Other limitations
This warranty is the complete and exclusive
agreement between you and VTech.
It supersedes all other written or oral
communications related to this Product. VTech
provides no other warranties for this Product.
The warranty exclusively describes all of VTech’s
responsibilities regarding the Product. There
are no other express warranties. No one is
authorized to make modifications to this limited
warranty and you should not rely on any such
modification.
State/Provincial Law Rights: This warranty gives
you specific legal rights, and you may also have
other rights, which vary from state to state or
province to province.
Limitations: Implied warranties, including
those of fitness for a particular purpose and
merchantability (an unwritten warranty that
the Product is fit for ordinary use) are limited
to one year from the date of purchase. Some
states/provinces do not allow limitations on how
long an implied warranty lasts, so the above
limitation may not apply to you. In no event
shall VTech be liable for any indirect, special,
incidental, consequential, or similar damages
(including, but not limited to lost profits or
revenue, inability to use the Product or other
associated equipment, the cost of substitute
equipment, and claims by third parties)
resulting from the use of this Product. Some
states/provinces do not allow the exclusion
or limitation of incidental or consequential
damages, so the above limitation or exclusion
may not apply to you.
Please retain your original sales receipt as
proof of purchase.
Technical specifications
Frequency
control
Crystal controlled PLL
synthesizer
Transmit
frequency
1921.536-1928.448 MHz
Channels 5
Nominal
effective
range
Maximum power allowed by
FCC and IC. Actual operating
range may vary according to
environmental conditions at the
time of use.
Power
requirements
Battery: 2 x AA Alkaline battery,
1.5V DC 2800mAh
VTech Communications, Inc.
A member of THE VTECH GROUP OF COMPANIES.
VTech is a registered trademark of VTech Holdings Limited.
Specifications are subject to change without notice.
© 2018 VTech Communications, Inc.
All rights reserved. 09/18. SN7021-X_CIB_V1.0
Document order number: 91-010999-010-100
Designed to fit your home.
And your life.
-
1
-
2
VTech SN7021 Manuel utilisateur
- Catégorie
- Téléphones
- Taper
- Manuel utilisateur
dans d''autres langues
- English: VTech SN7021 User manual