Sony DSX-A415BT Mode d'emploi

Marque: Sony

Modèle: DSX-A415BT

Catégorie: Récepteurs multimédia de voiture

Taper: Mode d'emploi

Ce manuel convient également à

DSX-A415BT Stereo Receiver

4-697-418-24(1)

DSX-A415BT

FM/AM

Digital Media

Player

Owner’s Record

The model and serial numbers are located on the bottom of the unit.

Record the serial number in the space provided below.

Refer to these numbers whenever you call upon your Sony dealer

regarding this product.

Model No. DSX-A415BT

Serial No.

Operating Instructions GB

Mode d’emploi FR

Manual de instrucciones ES

To cancel the demonstration (DEMO) display, see page 22.

For the connection/installation, see page 37.

Pour annuler l’affichage de démonstration (DEMO),

reportez-vous à la page 25.

Pour le raccordement/l’installation, reportez-vous à la page 41.

Para cancelar la pantalla de demostración (DEMO), consulte

la página 23.

Para la conexión/instalación, consulte la página 40.

2GB

The nameplate indicating operating voltage, etc., is

located on the bottom of the chassis.

Warning

For safety, be sure to install this unit in the

dashboard of the car as the rear side of the unit

becomes hot during use.

For details, see “Connection/Installation”

(page 37).

FOR THE CUSTOMERS IN THE USA. NOT

APPLICABLE IN CANADA, INCLUDING IN THE

PROVINCE OF QUEBEC.

POUR LES CLIENTS AUX ÉTATS-UNIS. NON

APPLICABLE AU CANADA, Y COMPRIS LA

PROVINCE DE QUÉBEC.

This equipment has been tested and found to

comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable

protection against harmful interference in a

residential installation. This equipment

generates, uses, and can radiate radio frequency

energy and, if not installed and used in

accordance with the instructions, may cause

harmful interference to radio communications.

However, there is no guarantee that interference

will not occur in a particular installation. If this

equipment does cause harmful interference to

radio or television reception, which can be

determined by turning the equipment off and

on, the user is encouraged to try to correct the

interference by one or more of the following

measures:

Reorient or relocate the receiving antenna.

Increase the separation between the

equipment and receiver.

Connect the equipment into an outlet on a

circuit different from that to which the receiver

is connected.

Consult the dealer or an experienced radio/TV

technician for help.

You are cautioned that any changes or

modifications not expressly approved in this

manual could void your authority to operate this

equipment.

3GB

This device complies with Part 15 of the FCC Rules

and Industry Canada's licence-exempt RSSs.

Operation is subject to the following two

conditions:

(1) This device may not cause interference; and

(2) This device must accept any interference,

including interference that may cause undesired

operation of the device.

This transmitter must not be co-located or operated

in conjunction with any other antenna or

transmitter.

Under Industry Canada regulations, this radio

transmitter may only operate using an antenna of a

type and maximum (or lesser) gain approved for

the transmitter by Industry Canada. To reduce

potential radio interference to other users, the

antenna type and its gain should be so chosen that

the equivalent isotropically radiated power (e.i.r.p.)

is not more than that necessary for successful

communication.

This equipment complies with FCC/IC radiation

exposure limits set forth for an uncontrolled

environment and meets the FCC radio frequency

(RF) Exposure Guidelines and RSS-102 of the IC

radio frequency (RF) Exposure rules. This

equipment has very low levels of RF energy that is

deemed to comply without maximum permissive

exposure evaluation (MPE).

For the State of California, USA only

Perchlorate Material – special handling may apply,

See

www.dtsc.ca.gov/hazardouswaste/perchlorate

WARNING: Do not ingest battery,

Chemical Burn Hazard.

The remote commander contains a coin/

button cell battery. If the coin/button cell battery is

swallowed, it can cause severe internal burns in just

2 hours and can lead to death.

Keep new and used batteries away from children. If

the battery compartment does not close securely,

stop using the product and keep it away from

children.

If you think batteries might have been swallowed or

placed inside any part of the body, seek immediate

medical attention.

Note on the lithium battery

Do not expose the battery to excessive heat such as

direct sunlight, fire or the like.

Disclaimer regarding services offered by

third parties

Services offered by third parties may be changed,

suspended, or terminated without prior notice.

Sony does not bear any responsibility in these sorts

of situations.

Warning if your car’s ignition has no ACC

position

Be sure to set the AUTO OFF function (page 22).

The unit will shut off completely and

automatically in the set time after the unit is

turned off, which prevents battery drain. If you

do not set the AUTO OFF function, press and hold

OFF until the display disappears each time you

turn the ignition off.

4GB

Caution

IN NO EVENT SHALL SONY BE LIABLE FOR ANY

INCIDENTAL, INDIRECT OR CONSEQUENTIAL

DAMAGES OR OTHER DAMAGES INCLUDING,

WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF

REVENUE, LOSS OF DATA, LOSS OF USE OF THE

PRODUCT OR ANY ASSOCIATED EQUIPMENT,

DOWNTIME, AND PURCHASER’S TIME RELATED TO

OR ARISING OUT OF THE USE OF THIS PRODUCT, ITS

HARDWARE AND/OR ITS SOFTWARE.

Dear customer, this product includes a radio

transmitter.

Please check your vehicle operation manual or

contact the manufacturer of your vehicle or your

vehicle dealer, before you install this product into

your vehicle.

Emergency calls

This BLUETOOTH car handsfree and the electronic

device connected to the handsfree operate using

radio signals, cellular, and landline networks as well

as user-programmed function, which cannot

guarantee connection under all conditions.

Therefore do not rely solely upon any electronic

device for essential communications (such as

medical emergencies).

On BLUETOOTH communication

Microwaves emitting from a BLUETOOTH device

may affect the operation of electronic medical

devices. Turn off this unit and other BLUETOOTH

devices in the following locations, as it may cause

an accident.

where inflammable gas is present, in a hospital,

train, airplane, or petrol station

near automatic doors or a fire alarm

This unit supports security capabilities that

comply with the BLUETOOTH standard to provide

a secure connection when the BLUETOOTH

wireless technology is used, but security may not

be enough depending on the setting. Be careful

when communicating using BLUETOOTH wireless

technology.

We do not take any responsibility for the leakage

of information during BLUETOOTH

communication.

If you have any questions or problems concerning

your unit that are not covered in this manual,

consult your nearest Sony dealer.

Important notice

5GB

Table of Contents

Warning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Guide to Parts and Controls . . . . . . . . . . . . . . . . . . 6

Getting Started

Detaching the Front Panel. . . . . . . . . . . . . . . . . . . . 8

Resetting the Unit . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Setting the Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Checking the Battery Voltage . . . . . . . . . . . . . . . . . 9

Preparing a BLUETOOTH Device . . . . . . . . . . . . . . . 9

Connecting a USB Device . . . . . . . . . . . . . . . . . . . . 11

Connecting Other Portable Audio Device . . . . . . . 12

Listening to the Radio

Listening to the Radio . . . . . . . . . . . . . . . . . . . . . . . 12

Using Radio Data System (RDS) . . . . . . . . . . . . . . . 13

Listening to the SiriusXM Radio . . . . . . . . . . . . . . . 13

Playback

Playing a USB Device . . . . . . . . . . . . . . . . . . . . . . . . 15

Playing a BLUETOOTH Device . . . . . . . . . . . . . . . . . 15

Searching and Playing Tracks . . . . . . . . . . . . . . . . 16

Listening to Pandora®

Setting up Pandora® . . . . . . . . . . . . . . . . . . . . . . . . 17

Streaming Pandora®. . . . . . . . . . . . . . . . . . . . . . . . . 17

Available Operations in Pandora®. . . . . . . . . . . . . . 17

Handsfree Calling (via BLUETOOTH

only)

Receiving a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Making a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Available Operations during Call . . . . . . . . . . . . . 19

Useful Functions

Sony | Music Center with iPhone/Android

smartphone . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Using Voice Recognition

(Android smartphone only). . . . . . . . . . . . . . . . 21

Using Siri Eyes Free . . . . . . . . . . . . . . . . . . . . . . . . . 21

Settings

Canceling the DEMO Mode. . . . . . . . . . . . . . . . . . . 22

Basic Setting Operation . . . . . . . . . . . . . . . . . . . . . 22

General Setup (GENERAL) . . . . . . . . . . . . . . . . . . . . 22

Sound Setup (SOUND). . . . . . . . . . . . . . . . . . . . . . . 23

Display Setup (DISPLAY) . . . . . . . . . . . . . . . . . . . . . 24

BLUETOOTH Setup (BLUETOOTH) . . . . . . . . . . . . . . 24

Sony | Music Center Setup (SONY APP). . . . . . . . . 25

Additional Information

Updating the Firmware . . . . . . . . . . . . . . . . . . . . . . 25

Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Connection/Installation

Cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Parts List for Installation . . . . . . . . . . . . . . . . . . . . . 37

Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

6GB

Guide to Parts and Controls

Front panel release button

SRC (source)

Turn on the power.

Change the source.

OFF

Press and hold for 1 second to turn the source

off and display the clock.

Press and hold for more than 2 seconds to turn

off the power and the display.

If the unit is turned off and the display

disappears, operation by the remote

commander is not available.

Control dial

Rotate to adjust the volume.

PUSH ENTER

Enter the selected item.

Press SRC, rotate then press to change the

source (timeout in 2 seconds).

Open the setup menu.

VOICE (page 19, 21)

Press and hold for more than 2 seconds to

activate voice dial, voice recognition (Android™

smartphone only), or the Siri function (iPhone

only).

N-Mark

Touch the control dial with Android smartphone

to make BLUETOOTH connection.

Display window

/ (SEEK –/+)

Tune in radio stations automatically. Press and

hold to tune manually.

/ (prev/next)

/ (fast-reverse/fast-forward)

PTY (program type)

Select PTY in RDS.

(browse) (page 14, 16, 17)

Enter the browse mode during playback.

(Not available when [BT AUDIO] is selected, or a

USB device in Android mode or iPod is

connected.)

Main unit

7GB

CALL

Enter the call menu. Receive/end a call.

Press and hold more than 2 seconds to switch

the BLUETOOTH signal.

 (back)

Return to the previous display.

MODE (page 12, 14, 17, 19)

Receptor for the remote commander

Number buttons (1 to 6)

Receive stored radio stations. Press and hold to

store stations.

ALBUM /

Skip an album for audio device. Press and hold

to skip albums continuously.

(Not available when a USB device in Android

mode or iPod is connected.)

Press  to thumbs up, or  to thumbs down in

Pandora® (page 17).

(repeat)

(Not available when a USB device in Android

mode is connected.)

(shuffle)

(Not available when a USB device in Android

mode is connected.)

MIC (page 19)

 (play/pause)

EXTRA BASS

Reinforces bass sound in synchronization with

the volume level. Press to change the EXTRA

BASS setting: [1], [2], [OFF].

AUX input jack

DSPL (display)

Press to change display items.

SCRL (scroll)

Press and hold to scroll a display item.

USB port

Microphone (inner panel)

In order for the handsfree function to work

properly, do not cover the microphone with

tape, etc.

The VOL (volume) + button has a tactile dot.

CALL

Enter the call menu. Receive/end a call.

SOUND

Open the SOUND menu directly.

Press and hold to open the setup menu.

///

Select a setup item, etc.

ENTER

Enter the selected item.

Press and hold for more than 2 seconds to

establish or terminate the “Sony | Music Center”

function.

/ (prev/next)

+/– (album +/–)

VOL (volume) +/–

RM-X231 Remote commander

8GB

Remove the insulation film before use.

Detaching the Front Panel

You can detach the front panel of this unit to

prevent theft.

1Press and hold OFF  until the unit turns

off, press the front panel release button

, then pull the panel towards you to

remove.

Caution alarm

If you turn the ignition switch to the OFF position

without detaching the front panel, the caution

alarm will sound for a few seconds. The alarm will

only sound if the built-in amplifier is used.

Serial numbers

Make sure the serial numbers on the bottom of the

unit and the back of the front panel are matched

correctly. Otherwise you cannot make BLUETOOTH

pairing, connection and disconnection by NFC.

Getting Started

Attaching the front panel

9GB

Resetting the Unit

Before operating the unit for the first time, or after

replacing the car battery or changing connections,

you must reset the unit.

1Press DSPL and (back)/MODE for

more than 2 seconds.

Note

Resetting the unit will erase the clock setting and some

stored contents.

Setting the Clock

1Press MENU, rotate the control dial to

select [GENERAL], then press it.

2Rotate the control dial to select [SET

CLOCK], then press it.

3Rotate the control dial to select

[MANUAL], then press it.

The hour indication flashes.

4Rotate the control dial to set the hour

and minute.

To move the digital indication, press /

(SEEK –/+).

5After setting the minute, press MENU.

The setup is complete and the clock starts.

To display the clock

Press DSPL.

To set the clock automatically

Select [AUTO <RDS>] in step 3.

Checking the Battery Voltage

You can check the current battery voltage. (Not

available while the source is off and the clock is

displayed.)

1Press DSPL repeatedly until the battery

voltage display appears.

Preparing a BLUETOOTH Device

You can enjoy music, or perform handsfree calling

depending on the BLUETOOTH compatible device

such as a smartphone, cellular phone and audio

device (hereafter “BLUETOOTH device” if not

otherwise specified). For details on connecting,

refer to the operating instructions supplied with the

device.

Before connecting the device, turn down the

volume of this unit; otherwise, loud sound may

result.

By touching the control dial on the unit with an

NFC* compatible smartphone, the unit is paired and

connected with the smartphone automatically.

* NFC (Near Field Communication) is a technology

enabling short-range wireless communication

between various devices, such as mobile phones and

IC tags. Thanks to the NFC function, data

communication can be achieved easily just by

touching the relevant symbol or designated location

on NFC compatible devices.

For a smartphone with Android OS 4.0 or lower

installed, downloading the app “NFC Easy Connect”

available at Google Play™ is required. The app may

not be downloadable in some countries/regions.

1Activate the NFC function on the

smartphone.

For details, refer to the operating instructions

supplied with the smartphone.

2Touch the N-Mark part of the unit with

the N-Mark part of the smartphone.

Make sure that lights up on the display of the

unit.

Connecting with a Smartphone using

One-touch connection (NFC)

10GB

To disconnect using NFC

Touch the N-Mark part of the unit with the N-Mark

part of the smartphone again.

Notes

When making the connection, handle the

smartphone carefully to prevent scratches.

One-touch connection is not possible when the unit is

already connected to another NFC compatible device.

In this case, disconnect the other device, and make

connection with the smartphone again.

When connecting a BLUETOOTH device for the first

time, mutual registration (called “pairing”) is

required. Pairing enables this unit and other devices

to recognize each other. This unit can connect two

BLUETOOTH devices (two cellular phones, or a

cellular phone and an audio device).

1Place the BLUETOOTH device within 1 m

(3 ft) of this unit.

2Press MENU, rotate the control dial to

select [BLUETOOTH], then press it.

3Rotate the control dial to select [SET

PAIRING], then press it.

4Rotate the control dial to select [SET

DEVICE 1]* or [SET DEVICE 2]*, then press

it.

flashes while the unit is in pairing standby

mode.

* [SET DEVICE 1] or [SET DEVICE 2] will be changed

to the paired device name after pairing is

complete.

5Perform pairing on the BLUETOOTH

device so it detects this unit.

6Select [DSX-XXXX] (your model name)

shown in the display of the BLUETOOTH

device.

If your model name does not appear, repeat

from step 2.

7If passkey* input is required on the

BLUETOOTH device, input [0000].

* Passkey may be called “Passcode,” “PIN code,”

“PIN number” or “Password,” etc., depending on

the device.

When pairing is made, stays lit.

8Select this unit on the BLUETOOTH device

to establish the BLUETOOTH connection.

or lights up when the connection is made.

Note

While connecting to a BLUETOOTH device, this unit

cannot be detected from another device. To enable

detection, enter the pairing mode and search for this

unit from another device.

To start playback

For details, see “Playing a BLUETOOTH Device”

(page 15).

To disconnect the paired device

Perform step 2 to 4 to disconnect after this unit and

the BLUETOOTH device are paired.

Pairing and connecting with a

BLUETOOTH device

[0000]

Input passkey

11GB

To use a paired device, connection with this unit is

required. Some paired devices will connect

automatically.

1Press MENU, rotate the control dial to

select [BLUETOOTH], then press it.

2Rotate the control dial to select [SET BT

SIGNL], then press it.

Make sure that lights up.

3Activate the BLUETOOTH function on the

BLUETOOTH device.

4Operate the BLUETOOTH device to

connect to this unit.

or lights up.

Icons in the display:

To connect the last-connected device from

this unit

Activate the BLUETOOTH function on the

BLUETOOTH device.

To connect with the audio device, press SRC

to select [BT AUDIO] and press  (play/

pause).

To connect with the cellular phone, press

CALL.

Note

While streaming BLUETOOTH audio, you cannot

connect from this unit to the cellular phone. Connect

from the cellular phone to this unit instead.

Tip

With BLUETOOTH signal on: when the ignition is turned

to on, this unit reconnects automatically to the last-

connected cellular phone.

When an iPhone/iPod with iOS5 or later installed is

connected to the USB port, the unit is paired and

connected with the iPhone/iPod automatically.

To enable BLUETOOTH Auto Pairing, make sure [SET

AUTOPAIR] in [BLUETOOTH] is set to [ON] (page 24).

1Activate the BLUETOOTH function on the

iPhone/iPod.

2Connect an iPhone/iPod to the USB port.

Make sure that lights up on the display of the

unit.

Notes

BLUETOOTH Auto Pairing is not possible if the unit is

already connected to another BLUETOOTH device. In

this case, disconnect the other device, then connect

the iPhone/iPod again.

If BLUETOOTH Auto Pairing is not established, see

“Preparing a BLUETOOTH Device” (page 9).

Connecting a USB Device

1Turn down the volume on the unit.

Connecting with a paired BLUETOOTH

device

Lights up when handsfree calling is

available by enabling the HFP (Handsfree

Profile).

Lights up when the audio device is

playable by enabling the A2DP

(Advanced Audio Distribution Profile).

Connecting with an iPhone/iPod

(BLUETOOTH Auto Pairing)

12GB

2Connect the USB device to the unit.

To connect an iPod/iPhone, use the USB

connection cable for iPod (not supplied).

Connecting Other Portable

Audio Device

1Turn off the portable audio device.

2Turn down the volume on the unit.

3Connect the portable audio device to the

AUX input jack (stereo mini jack) on the

unit with a connecting cord (not

supplied)*.

* Be sure to use a straight type plug.

4Press SRC to select [AUX].

To match the volume level of the connected

device to other sources

Start playback of the portable audio device at a

moderate volume, and set your usual listening

volume on the unit.

Press MENU, then select [SOUND]  [SET AUX VOL]

(page 24).

Listening to the Radio

To listen to the radio, press SRC to select [TUNER].

1Press MODE to change the band (FM1,

FM2, FM3, AM1 or AM2).

2Press MENU, rotate the control dial to

select [GENERAL], then press it.

3Rotate the control dial to select [SET

BTM], then press it.

The unit stores stations in order of frequency on

the number buttons.

1Press MODE to change the band (FM1,

FM2, FM3, AM1 or AM2).

2Perform tuning.

To tune manually

Press and hold / (SEEK –/+) to locate

the approximate frequency, then press /

 (SEEK –/+) repeatedly to finely adjust to the

desired frequency.

To tune automatically

Press / (SEEK –/+).

Scanning stops when the unit receives a station.

1While receiving the station that you want

to store, press and hold a number button

(1 to 6) until [MEM] appears.

Listening to the Radio

Storing automatically (BTM)

Tuning

Storing manually

13GB

1Select the band, then press a number

button (1 to 6).

Using Radio Data System (RDS)

1Press PTY during FM reception.

2Rotate the control dial until the desired

program type appears, then press it.

The unit starts to search for a station

broadcasting the selected program type.

Type of programs

Listening to the SiriusXM Radio

Only SiriusXM brings you more of what you love to

listen to, all in one place. Get over 140 channels,

including commercial-free music plus the best

sports, news, talk, comedy and entertainment.

Welcome to the world of satellite radio. A SiriusXM

Connect Vehicle Tuner and Subscription are

required. For more information, visit

www.siriusxm.com

After installing your SiriusXM Connect Vehicle Tuner

and antenna, press SRC to select [SIRIUSXM]. You

should be able to hear the SiriusXM preview

channel on Channel 1. After verifying that you can

hear the preview channel, select Channel 0 to find

the Radio ID of your tuner. In addition, the Radio ID

is located on the bottom of the SiriusXM Connect

Vehicle Tuner and its packaging. You will need this

number to activate your subscription. Write the

number down for reference.

In the USA, you can activate online or by calling

SiriusXM Listener Care:

Online: Visit www.siriusxm.com/activatenow

Phone: Call 1-866-635-2349

In Canada, you can activate online or by calling

SiriusXM Listener Care:

Online: Visit www.siriusxm.ca/activatexm

Phone: Call 1-877-438-9677

As part of the activation process, the SiriusXM

satellites will send an activation message to your

tuner. When your radio detects that the tuner has

received the activation message, your radio will

display: [SUBSCRIPION UPDATED - PRESS ENT TO

CONTINUE]. Once subscribed, you can tune to

channels in your subscription plan.

Notes

The activation process usually takes 10 to 15 minutes,

but may take up to an hour.

Your radio will need to be turned on and receiving the

SiriusXM signal to receive the activation message.

Receiving the stored stations

Selecting program types (PTY)

NEWS (News), INFORM (Information), SPORTS

(Sports), TALK (Talk), ROCK (Rock), CLS ROCK

(Classic Rock), ADLT HIT (Adult Hits), SOFT RCK (Soft

Rock), TOP 40 (Top 40), COUNTRY (Country),

OLDIES (Oldies), SOFT (Soft), NOSTALGA

(Nostalgia), JAZZ (Jazz), CLASSICL (Classical),

R & B (Rhythm and Blues), SOFT R&B (Soft Rhythm

and Blues), LANGUAGE (Foreign Language), REL

MUSC (Religious Music), REL TALK (Religious Talk),

PERSNLTY (Personality), PUBLIC (Public), COLLEGE

(College), HABL ESP (Spanish Talk), MUSC ESP

(Spanish Music), HIP HOP (Hip-Hop), WEATHER

(Weather)

Activating your SiriusXM Subscription

14GB

1Press (browse).

2Rotate the control dial to select

[CHANNEL], then press it.

3Rotate the control dial to select the

desired channel, then press it.

To select channels with rapid browse mode

Press and hold  or  of remote commander more

than 2 seconds after [CHANNEL] selected, then

press ENTER.

To select channels from categories

1Press (browse).

2Rotate the control dial to select [CATEGORY], then

press it.

3Rotate the control dial to select the desired

category, then press it.

The channel list appears.

4Rotate the control dial to select the desired

channel, then press it.

To store channels

1While receiving the channel that you want to store,

press and hold a number button (1 to 6) until [MEM]

appears.

To receive the stored channel, press MODE to select

the Band you want ([SX1], [SX2] or [SX3]), then press

a number button (1 to 6). (Each Band can store up to

6 channels.)

To set a parental control

The parental control feature allows you to limit

access to SiriusXM channels with mature content.

When enabled, the parental control feature requires

you to enter a passcode to tune to the locked

channels. Information on setting up the passcode

and locking channels can be found below.

1Press MENU and rotate the control dial.

2Select [GENERAL]  [SXM PARENTAL]  [LOCK

SELECT]  [LOCK-ON].

3Enter the passcode by rotating the control dial on

the unit or pressing / on the remote

commander.

To move the entry position, press /

(SEEK –/+) on the unit or / on the remote

commander.

The initial passcode is [0000].

4After entering the passcode, press ENTER.

To unlock the channels, select [LOCK-OFF].

To change the passcode

1Press MENU and rotate the control dial.

2Select [GENERAL]  [SXM PARENTAL]  [CODE EDIT].

3Enter the current passcode on the current passcode

input display, then press ENTER.

The initial passcode is [0000].

4Enter your new 4-digit passcode on the new

passcode input display, then press ENTER.

To change display items

Press DSPL to change as follows:

Channel Number (Default)  Channel Name  Artist

Name  Song Title  Content Info  Category Name

 Clock  Battery Voltage

Selecting channels for SiriusXM

15GB

Playing a USB Device

In these Operating Instructions, “iPod” is used as a

general reference for the iPod functions on an iPod

and iPhone, unless otherwise specified by the text

or illustrations.

For details on the compatibility of your iPod, see

“About iPod” (page 26) or visit the support site on

the back cover.

AOA (Android Open Accessory) 2.0, MSC (Mass

Storage Class) and MTP (Media Transfer Protocol)

type USB devices* compliant with the USB standard

can be used. Depending on the USB device, the

Android mode or MSC/MTP mode can be selected

on the unit.

Some digital media players or Android

smartphones may require setting to MTP mode.

* e.g., a USB flash drive, digital media player, Android

smartphone

Notes

For details on the compatibility of your USB device,

visit the support site on the back cover.

Smartphones with Android OS 4.1 or higher installed

support Android Open Accessory 2.0 (AOA 2.0).

However, some smartphones may not fully support

AOA 2.0 even if Android OS 4.1 or higher is installed.

For details on the compatibility of your Android

smartphone, visit the support site on the back cover.

Playback of the following files is not supported.

MP3/WMA/AAC/FLAC:

copyright-protected files

DRM (Digital Rights Management) files

Multi-channel audio files

MP3/WMA/AAC:

lossless compression files

Before making a connection, select the USB mode

(Android mode or MSC/MTP mode) depending on

the USB device (page 23).

1Connect a USB device to the USB port

(page 11).

Playback starts.

If a device is already connected, to start

playback, press SRC to select [USB] ([IPD]

appears in the display when the iPod is

recognized).

2Adjust the volume on this unit.

To stop playback

Press and hold OFF for 1 second.

To remove the device

Stop playback, then remove the device.

Caution for iPhone

When you connect an iPhone via USB, phone call

volume is controlled by the iPhone, not the unit. Do

not inadvertently increase the volume on the unit

during a call, as a sudden loud sound may result

when the call ends.

Playing a BLUETOOTH Device

You can play contents on a connected device that

supports BLUETOOTH A2DP (Advanced Audio

Distribution Profile).

1Make BLUETOOTH connection with the

audio device (page 9).

To select the audio device, press MENU, then

select [BLUETOOTH]  [SET AUDIODEV]

(page 24).

2Press SRC to select [BT AUDIO].

3Operate the audio device to start

playback.

4Adjust the volume on this unit.

Playback

16GB

Notes

Depending on the audio device, information such as

title, track number/time and playback status may not

be displayed on this unit.

Even if the source is changed on this unit, playback of

the audio device does not stop.

[BT AUDIO] does not appear in the display while

running the “Sony | Music Center” application via the

BLUETOOTH function.

To match the volume level of the BLUETOOTH

device to other sources

Start playback of the BLUETOOTH audio device at a

moderate volume, and set your usual listening

volume on the unit.

Press MENU, then select [SOUND]  [SET BTA VOL]

(page 24).

Searching and Playing Tracks

Not available when a USB device in Android mode is

connected.

1During playback, press (repeat) or

(shuffle) repeatedly to select the desired

play mode.

Playback in the selected play mode may take

time to start.

Available play modes differ depending on the

selected sound source.

Not available when a USB device in Android mode

or iPod is connected.

1During USB playback, press (browse)*

to display the list of search categories.

When the track list appears, press (back)

repeatedly to display the desired search

category.

* During USB playback, press (browse) for more

than 2 seconds to directly return to the beginning

of the category list.

2Rotate the control dial to select the

desired search category, then press it to

confirm.

3Repeat step 2 to search the desired track.

Playback starts.

To exit the Quick-BrowZer mode

Press (browse).

Not available when a USB device in Android mode

or iPod is connected.

1During USB playback, press (browse).

2Press  (SEEK +).

3Rotate the control dial to select the item.

The list is jumped in steps of 10% of the total

number of items.

4Press ENTER to return to the Quick-

BrowZer mode.

The selected item appears.

5Rotate the control dial to select the

desired item, then press it.

Playback starts.

Repeat play and shuffle play

Searching a track by name (Quick-

BrowZer™)

Searching by skipping items

(Jump mode)

17GB

Pandora® is available to stream music through your

iPhone. You can control Pandora® on a BLUETOOTH

connected iPhone/Android smartphone from this

unit.

Pandora® is only available in certain countries.

Please visit

http://www.pandora.com/legal

for more information.

Setting up Pandora®

1Check the compatibility of your mobile

device by visiting the support site on the

back cover.

2Download the latest version of the

Pandora® application from your

smartphone’s app store. A list of

compatible devices can be found at

www.pandora.com/everywhere/mobile

Streaming Pandora®

1Make BLUETOOTH connection with the

audio device (page 9).

To select the audio device, press MENU, then

select [BLUETOOTH]  [AUDIODEV] (page 24).

2Press SRC to select [PANDORA].

3Launch Pandora® application on your

mobile device.

4Press  (play/pause) to start playback.

If the device number appears

Make sure that the same numbers are displayed

(e.g., 123456) in this unit and the mobile device,

then press ENTER on this unit and select [Yes] on

the mobile device.

When activating the BLUETOOTH function

You can adjust the volume level.

Press MENU, then select [SOUND]  [SET BTA VOL]

(page 24).

Available Operations in

Pandora®

“Thumbs Up” or “Thumbs Down” feedback allows

you to personalize stations.

1During playback, press  (Thumbs Up) or

 (Thumbs Down).

The station list allows you to easily select a desired

station.

1During playback, press (browse).

2Press  (SEEK +) to select the sorting

order [BY DATE] or [A TO Z].

3Rotate the control dial to select the

desired station, then press it.

Playback starts.

The track currently being played can be

bookmarked and stored in your Pandora® account.

1During playback, press MODE.

Listening to Pandora®

“Thumbs” feedback

Using the station list

Bookmarking

18GB

To use a cellular phone, connect it with this unit.

You can connect two cellular phones to the unit. For

details, see “Preparing a BLUETOOTH Device”

(page 9).

Receiving a Call

1Press CALL when a call is received with a

ringtone.

The phone call starts.

Note

The ringtone and talker’s voice are output from the

front speakers. To select the speakers for handsfree

calling, press MENU, then select [BLUETOOTH]  [SET

VOICE-OUT] (page 25).

To reject the call

Press and hold OFF for 1 second.

To end the call

Press CALL again.

Making a Call

You can make a call from the phonebook or call

history when a cellular phone supporting PBAP

(Phone Book Access Profile) is connected.

When two cellular phones are connected to the

unit, select either phone.

1Press CALL.

When two cellular phones are connected to the

unit, rotate the control dial to select either

phone, then press it.

2Rotate the control dial to select [PHONE

BOOK], then press it.

3Rotate the control dial to select an initial

from the initial list, then press it.

4Rotate the control dial to select a name

from the name list, then press it.

5Rotate the control dial to select a

number from the number list, then press

it.

The phone call starts.

1Press CALL.

When two cellular phones are connected to the

unit, rotate the control dial to select either

phone, then press it.

2Rotate the control dial to select [RECENT

CALL], then press it.

A list of the call history appears.

3Rotate the control dial to select a name

or phone number from the call history,

then press it.

The phone call starts.

1Press CALL.

When two cellular phones are connected to the

unit, rotate the control dial to select either

phone, then press it.

2Rotate the control dial to select [DIAL

NUMBER], then press it.

3Rotate the control dial to enter the

phone number, and lastly select [ ]

(space), then press ENTER*.

The phone call starts.

* To move the digital indication, press /

(SEEK –/+).

Handsfree Calling (via BLUETOOTH

only)

From the phonebook

From the call history

By phone number input

19GB

Note

[_] appears instead of [#] on the display.

1Press CALL.

When two cellular phones are connected to the

unit, rotate the control dial to select either

phone, then press it.

2Rotate the control dial to select [REDIAL],

then press it.

The phone call starts.

You can make a call by saying the voice tag stored

in a connected cellular phone that has a voice

dialing function.

1Press CALL.

When two cellular phones are connected to the

unit, rotate the control dial to select either

phone, then press it.

2Rotate the control dial to select [VOICE

DIAL], then press it.

Alternatively, press and hold VOICE for more

than 2 seconds.

3Say the voice tag stored on the cellular

phone.

Your voice is recognized, and the call is made.

To cancel voice dialing

Press VOICE.

Available Operations during

Call

To adjust the ringtone volume

Rotate the control dial while receiving a call.

To adjust the talker’s voice volume

Rotate the control dial during a call.

To adjust the volume for the other party (Mic

gain adjustment)

Press MIC.

Adjustable volume levels: [MIC-LOW], [MIC-MID],

[MIC-HI].

To reduce echo and noise (Echo Canceler/

Noise Canceler Mode)

Press and hold MIC.

Settable mode: [EC/NC-1], [EC/NC-2].

To switch between handsfree mode and

handheld mode

During a call, press MODE to switch the phone call

audio between the unit and cellular phone.

Note

Depending on the cellular phone, this operation may

not be available.

By redial

By voice tags

20GB

Sony | Music Center with

iPhone/Android smartphone

Downloading the latest version of “Sony | Music

Center” application is required from the App Store

for iPhone or from Google Play for Android

smartphone.

Notes

For your safety, follow your local traffic laws and

regulations, and do not operate the application while

driving.

“Sony | Music Center” is an app for controlling Sony

audio devices which are compatible with “Sony |

Music Center”, by your iPhone/Android smartphone.

What you can control with “Sony | Music Center”

varies depending on the connected device.

To make use of “Sony | Music Center” features, see

the details on your iPhone/Android smartphone.

For further details on “Sony | Music Center,” visit the

following URL: http://www.sony.net/smcqa/

Visit the website below and check the compatible

iPhone/Android smartphone models.

For iPhone: visit the App Store

For Android smartphone: visit Google Play

1Make the BLUETOOTH connection with

iPhone/Android smartphone (page 9).

To select the audio device, press MENU, then

select [BLUETOOTH]  [SET AUDIODEV]

(page 24).

2Launch the “Sony | Music Center”

application.

3Press MENU, rotate the control dial to

select [SONY APP], then press it.

Connection to iPhone/Android smartphone

starts.

For details on the operations on iPhone/

Android smartphone, see the help of the

application.

If the device number appears

Make sure that the number is displayed (e.g.,

123456), then select [Yes] on the iPhone/Android

smartphone.

To terminate connection

Press MENU, rotate the control dial to select [SONY

APP], then press it.

Selecting the source or application

You can operate to select the desired source or

application on iPhone/Android smartphone.

To select the source

Press SRC repeatedly. Alternatively, press SRC,

rotate the control dial to select the desired source,

then press ENTER.

To display the source list

Press SRC.

Announcement of SMS by voice guide

(Android smartphone only)

Messages of SMS are automatically read out

through the car speakers when they are received.

For details on settings, refer to the help of the

application.

Replying a message of SMS (Android

smartphone only)

You can reply a message by touching the reply icon.

1Activate the “Sony | Music Center” application, then

touch the [Reply] (reply) icon.

The message input display appears on the “Sony |

Music Center” application.

2Input a reply message by voice recognition.

The list of message candidates appears on the “Sony

| Music Center” application.

3Rotate the control dial to select the desired

message, then press it.

The message is sent out.

Useful Functions

Establishing the Sony | Music Center

connection

La page charge ...

Sony DSX-A415BT Mode d'emploi

Marque: Sony

Modèle: DSX-A415BT

Catégorie: Récepteurs multimédia de voiture

Taper: Mode d'emploi

Ce manuel convient également à

DSX-A415BT Stereo Receiver

Télécharger le PDF

rapport

dans d''autres langues

English: Sony DSX-A415BT Operating instructions
español: Sony DSX-A415BT Instrucciones de operación

Sony DSX-A415BT Mode d'emploi

Ce manuel convient également à

Sony DSX-A415BT Mode d'emploi

dans d''autres langues

Documents connexes