VTech Sew & Play Unicorn Imaginative Play Toy Manuel utilisateur

Catégorie
Jouets
Taper
Manuel utilisateur
Instruction Manual
2
INTRODUCTION
Thank you for purchasing the Sew & Play UnicornTM! Build sewing
skills and express your creativity while making a magical
unicorn. When you’re done, this playful friend talks and sings about
colors while her horn, cheeks and tummy light up in a rainbow of colors.
INCLUDED IN THE PACKAGE
Sew & Play Unicorn™
• Guidebook
1 Quick Start Guide
3
WARNING
All packing materials such as tape, plastic sheets, packaging locks,
removable tags, cable ties, cords and packaging screws are not part
of this toy, and should be discarded for your child’s safety.
ATTENTION
Pour la sécurité de votre enfant, débarrassez-vous de tous les produits
d’emballage tels que rubans adhésifs, feuilles de plastique, attaches,
étiquettes, cordons et vis d’emballage. Ils ne font pas partie du jouet.
GETTING STARTED
Battery Removal and Installation
1. Make sure the unit is turned Off.
2. Find the battery cover located on the bottom of the unit, use a
screwdriver to loosen the screw and open the battery cover.
3. Remove old batteries by pulling up on
one end of each battery.
4. Install 3 new AAA (AM-3/LR6) batteries
following the diagram inside the
battery box. (For best performance,
alkaline batteries or fully charged
Ni-MH rechargeable batteries are
recommended.)
5. Replace the battery cover and tighten
the screw to secure.
WARNING:
Adult assembly required for battery installation.
Keep batteries out of reach of children.
ATTENTION :
Les piles ou accumulateurs doivent être installés par un adulte.
Tenir les piles ou accumulateurs hors de portée des enfants.
4
Star Button
Heart Button
Motion Sensor
Mode Switch
- Light Mode/
- Off
- Play Mode
NOTE
Please save this Instruction Manual as it contains important information.
NOTE
Il est conseillé de sauvegarder ce manuel d’utilisation car il comporte
des informations importantes.
PRODUCT FEATURES
1. Mode Switch (Play Mode - OFF - Light Mode)
Slide the switch to OFF to turn off the unicorn.
Slide the switch to Play Mode to play with lights and sounds.
Slide the switch to Light Mode to watch a light show.
2. Heart and Star LED Buttons
Press the Heart and Star LED buttons to interact with the unicorn
in Play Mode, or to change the LED effects in Light Mode.
3. Motion Sensor
Shake the unicorn to listen to songs while in Play Mode.
No response in Light Mode.
5
IMPORTANT: BATTERY INFORMATION
Insert batteries with the correct polarity (+ and -).
Do not mix old and new batteries.
Do not mix alkaline, standard (carbon-zinc) or rechargeable
batteries.
Only batteries of the same or equivalent type as recommended are
to be used.
Do not short-circuit the supply terminals.
Remove batteries during long periods of non-use.
Remove exhausted batteries from the toy.
Dispose of batteries safely. Do not dispose of batteries in fire.
RECHARGEABLE BATTERIES
Remove rechargeable batteries (if removable) from the toy before
charging.
Rechargeable batteries are only to be charged under adult
supervision.
Do not charge non-rechargeable batteries.
CARE & MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from any direct heat
sources.
3. Remove the batteries if the unit will not be in use for an extended
period of time.
4. Do not drop the unit on hard surfaces and do not expose the unit
to moisture or water.
6
TROUBLESHOOTING
If for some reason the program/activity stops working, please follow
these steps:
1. Turn the unit Off.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace the batteries.
4. Turn the unit On The unit will now be ready to play again.
5. If the unit still does not work, install a new set of batteries.
IMPORTANT NOTE:
If the problem persists, please call our Consumer Services
Department at 1-800-521-2010 in the U.S., 1-877-352-8697
in Canada, or by going to our website vtechkids.com and filling
out our Contact Us form located under the Customer Support
link. Creating and developing VTech products is accompanied by a
responsibility that we take very seriously. We make every effort to
ensure the accuracy of the information, which forms the value of
our products. However, errors sometimes can occur. It is important
for you to know that we stand behind our products and encourage
you to contact us with any problems and/or suggestions you might
have. A service representative will be happy to help you.
Environmental Phenomena
The unit may malfunction if subjected to radio-frequency interference.
It should revert to normal operation when the interference stops. If
not, it may become necessary to turn the power Off and back On, or
remove and reinstall the batteries. In the unlikely event of an electrostatic
discharge, the unit may malfunction and lose memory, requiring the
user to reset the device by removing and reinstalling the batteries.
7
Impact de l’environnement
Une défaillance de fonctionnement de l’appareil peut survenir s’il est
sujet à des interférences avec les fréquences radioélectriques. Le
fonctionnement normal de l’appareil devrait reprendre avec l’arrêt
des interférences. Si ce n’est pas le cas, il peut s’avérer nécessaire
d’éteindre et rallumer l’appareil ou de retirer et réinstaller les piles.
Dans l’éventualité peu probable d’une décharge électrostatique, un
mauvais fonctionnement et une perte de mémoire de l’appareil peuvent
se produire. L’utilisateur doit alors retirer et réinstaller les piles pour
réinitialiser l’appareil.
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC
RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO
CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL
INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY
INTERFERENCE RECEIVED, INCLUDING INTERFERENCE
THAT MAY CAUSE UNDESIRED OPERATION.
CAN ICES-003(B)/NMB-003(B)
Note:
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
8
Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Caution: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate
the equipment.
Suppliers Declaration of Conformity
47 CFR § 2.1077 Compliance Information
Trade Name: VTech®
Model: 5664
Product Name: Sew & Play UnicornTM
Responsible Party: VTech Electronics North America, L.L.C.
Address: 1156 W. Shure Drive, Suite 200,
Arlington Heights, IL 60004
Website: vtechkids.com
Visit our website for more
information about our products,
downloads, resources and more.
vtechkids.com
vtechkids.ca
Read our complete warranty policy online at
vtechkids.com/warranty
vtechkids.ca/warranty
TM & © 2023 VTech Holdings Limited.
All rights reserved.
IM-566400-000
Version:0
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9

VTech Sew & Play Unicorn Imaginative Play Toy Manuel utilisateur

Catégorie
Jouets
Taper
Manuel utilisateur