VTech VSP845G Guide de démarrage rapide

Catégorie
Téléphones
Taper
Guide de démarrage rapide
ErisTerminal® SIP Deskset
VSP845G
Quick Start Guide
2
Important Safety Information
This symbol is to alert you to important operating or servicing
instructions that may appear on the product or in this user’s manual.
Always follow basic safety precautions when using this product to
reduce the risk of injury, re, or electric shock.
Important Safety Instructions
When using your telephone equipment, basic safety precautions should always be
followed to reduce the risk of re, electric shock and injury, including the following:
1. This product should be installed by a qualied technician.
2. This product should only be connected to the host equipment and never
directly to the network such as Public Switch Telephone Network (PSTN) or
Plain Old Telephone Services (POTS).
3. Read and understand all instructions.
4. Follow all warnings and instructions marked on the product.
5. Unplug this product from the wall outlet before cleaning. Do not use liquid or
aerosol cleaners. Use a damp cloth for cleaning.
6. Do not use this product near water such as near a bath tub, wash bowl,
kitchen sink, laundry tub or swimming pool, or in a wet basement or shower.
7. Do not place this product on an unstable table, shelf, stand or other unstable
surfaces.
8. Slots and openings in the back or bottom of the telephone base and handset
are provided for ventilation. To protect them from overheating, these
openings must not be blocked by placing the product on a soft surface such
as a bed, sofa or rug. This product should never be placed near or over a
radiator or heat register. This product should not be placed in any area where
proper ventilation is not provided.
9. This product should be operated only from the type of power source indicated
on the marking label. If you are not sure of the type of power supplied at the
premises, consult your dealer or local power company.
10. Do not allow anything to rest on the power cord. Do not install this product
where the cord may be walked on.
11. Never push objects of any kind into this product through the slots in the
telephone base or handset because they may touch dangerous voltage
points or create a short circuit. Never spill liquid of any kind on the product.
3
12. To reduce the risk of electric shock, do not disassemble this product, but
take it to an authorized service facility. Opening or removing parts of the
telephone base or handset other than specied access doors may expose
you to dangerous voltages or other risks. Incorrect reassembling can cause
electric shock when the product is subsequently used.
13. Do not overload wall outlets and extension cords.
14. Unplug this product from the wall outlet and refer servicing to an authorized
service facility under the following conditions:
A. When the power supply cord or plug is damaged or frayed.
B. If liquid has been spilled onto the product.
C. If the product has been exposed to rain or water.
D. If the product does not operate normally by following the operating
instructions. Adjust only those controls that are covered by the
operation instructions. Improper adjustment of other controls may
result in damage and often requires extensive work by an authorized
technician to restore the product to normal operation.
E. If the product has been dropped and the telephone base and/or
handset has been damaged.
F. If the product exhibits a distinct change in performance.
15. Avoid using a telephone (other than cordless) during an electrical storm.
There is a remote risk of electric shock from lightning.
16. Do not use the telephone to report a gas leak in the vicinity of the leak. Under
certain circumstances, a spark may be created when the adapter is plugged
into the power outlet, or when the handset is replaced in its cradle. This is a
common event associated with the closing of any electrical circuit. The user
should not plug the phone into a power outlet if the phone is located in an
environment containing concentrations of ammable or ame-supporting
gases, unless there is adequate ventilation. A spark in such an environment
could create a re or explosion. Such environments might include: medical
use of oxygen without adequate ventilation; industrial gases (cleaning
solvents; gasoline vapors; etc.); a leak of natural gas; etc.
17. Only put the handset of your telephone next to your ear when it is in normal
talk mode.
18. The power adapters are intended to be correctly oriented in a vertical or oor
mount position. The prongs are not designed to hold the plug in place if it is
plugged into a ceiling, under-the-table or cabinet outlet.
4
19. Use only the power cord indicated in this manual.
Power adapter rating: 5 Vdc @ 2 A
20. For pluggable equipment, the socket-outlet shall be installed near the
equipment and shall be easily accessible.
21. In wall mounting position, make sure to mount the telephone base on the wall
by aligning the eyelets with the mounting studs of the wall plate. Then slide
the telephone base down on both mounting studs until it locks into place.
Refer to the full instructions in Deskset Installation in the User Guide.
22. CAUTION: Keep small metallic objects such as pins and staples away from
the handset receiver.
SAVE THESE INSTRUCTIONS
For cETL compliance only
Mesures de sécurité importantes
Ce symbole vous alertera d’informations importantes ou d’instructions
d’entretien pouvant apparaître dans ce guide d’utilisation. Respectez
toujours les mesures de sécurité et de sécurité de base lorsque vous
utilisez ce produit, an de réduire les risques de blessures, d’incendie,
ou d’électrocution.
Mesures de sécurité importantes
An de réduire les risques d’incendie, de blessures corporelles ou
d’électrocution, suivez toujours ces mesures préventives de base lorsque vous
utilisez votre téléphone :
1. Cet appareil doit être installé par un technicien qualié.
2. Cet appareil doit être branché à un équipement hôte et jamais branché à un
réseau, tel qu’un réseau PSTN publique ou un réseau téléphonique standard
(POTS).
3. Lisez et comprenez bien toutes les instructions.
4. Observez toutes les instructions et mises en garde inscrites sur l’appareil.
5. Débranchez ce téléphone de la prise murale avant de le nettoyer. N’utilisez
pas de nettoyeurs liquides ni en aérosol. N’utilisez qu’un chiffon doux et
légèrement humecté.
6. N’utilisez pas ce produit près de l’eau, tel que près d’un bain, d’un lavabo,
5
d’un évier de cuisine, d’un bac de lavage ou d’une piscine, ou dans un sous-
sol humide ou sous la douche.
7. Ne déposez pas ce téléphone sur un chariot, support ou table chancelants.
L’appareil pourrait tomber et être sérieusement endommagé.
8. Le boîtier de l’appareil est doté de fentes et d’ouvertures d’aération situées
à l’arrière ou en dessous. An d’empêcher la surchauffe, ces ouvertures ne
doivent pas être obstruées en plaçant l’appareil sur un lit, divan, tapis ou
autre surface similaires. Ne placez pas cet appareil à proximité d’un élément
de chauffage ni d’une plinthe électrique. De plus, ne l’installez pas dans une
unité murale ou un cabinet fermé qui ne possède pas d’aération adéquate.
9. Ne faites fonctionner cet appareil qu’avec le type d’alimentation indiqué sur
les étiquettes de l’appareil. Si vous ne connaissez pas le voltage de votre
maison, consultez votre marchand ou votre fournisseur d’électricité.
10. Ne déposez rien sur le cordon d’alimentation. Installez cet appareil dans
un endroit sécuritaire, là où personne ne pourra trébucher sur la ligne
d’alimentation ni le cordon téléphonique modulaire.
11. N’insérez jamais d’objets à travers les fentes et ouvertures de cet
appareil, car ils pourraient toucher à des points de tension dangereux
ou court-circuiter des pièces, ce qui constituerait un risque d’incendie ou
d’électrocution. N’échappez pas de liquides dans l’appareil.
12. An de réduire les risques d’électrocution, ne démontez pas l’appareil, mais
apportez-le plutôt à un centre de service qualié s’il doit être réparé. En
enlevant le couvercle, vous vous exposez à des tensions dangereuses ou
autres dangers similaires. Un remontage inadéquat peut être à l’origine d’une
électrocution lors d’une utilisation ultérieure de l’appareil.
13. Ne surchargez pas les prises de courant ni les rallonges électriques, car ceci
peut constituer un risque d’incendie ou d’électrocution.
14. Débranchez cet appareil de la prise de courant et communiquez avec le
département de service à la clientèle de VTech dans les cas suivants:
A. Lorsque le cordon d’alimentation est endommagé ou écorché.
B. Si du liquide a été échappé dans l’appareil.
C. Si l’appareil a été exposé à une source d’humidité telle que la pluie ou l’eau.
D. Si l’appareil ne fonctionne pas normalement en suivant les directives
du guide. N’ajustez que les commandes couvertes dans le guide
d’utilisation, car un mauvais réglage de celles-ci peut être à l’origine de
dommages, ce qui nécessiterait des réparations considérables pour
remettre l’appareil à son état de fonctionnement normal.
6
E. Si l’appareil a été échappé ou son boîtier, endommagé.
F. Si le produit afche une nette diminution de sa performance.
15. Évitez d’utiliser un téléphone (autre qu’un sans l) pendant un orage. Les
éclairs peuvent être à l’origine d’une électrocution.
16. N’utilisez pas le téléphone pour rapporter une fuite de gaz à proximité de
celle-ci. Sous certaines circonstances, une inteincelle pourrait survenir
lorsque l’adaptateur est branché à une prise de courant, ou lorsque le
combiné est déposé sur le combiné. Ceci est un événement commun
associé avec la fermeture d’un circuit électrique. L’utilisateur ne devrait
pas brancher le téléphone dans une prise de courant, et ne devrait pas
déposer le combiné chargé sur le socle, si le téléphone se trouve dans un
environnement ou la concentration de gaz inammables, sans ventilation
adéquate. Une étincelle dans ces endroits pourrait provoquer un incendie ou
une explosion. Ces environnements pourraient être l’utilisation médicale de
l’oxygène sans ventilation adéquate; le gaz industriel (dissolvants, vapeurs
d’essence, etc.); une fuite de gaz naturel, etc.
17. Placez uniquement le combiné de votre appareil près de votre oreille lorsqu’il
est en mode de conversation normal.
18. Les adaptateurs sont conçus pour être orientés en position verticale ou en
position horizontale sur le plancher.
19. N’utilisez que cordon d’alimentation et les piles indiquées dans ce guide
d’utilisation.
Note de l’adaptateur: 5 Vdc @ 2 A
20. Pour les PRODUITS À BRANCHER À UNE PRISE DE COURANT, la prise
de courant doit être installée près du produit, an d’assurer une accessibilité
sécuritaire à la prise de courant.
21. En position de montage mural, assurez-vous de monter le socle du
téléphone sur le mur en alignant les oeillets avec les goujons de xation de
la plaque murale. Ensuite, faites glisser le socle vers le bas sur les deux
goujons de xation jusqu’à ce qu’il se verrouille en place. Reportez-vous aux
instructions complètes dans la section Installation dans ce guide d’utilisation.
22. MISE EN GARDE : Éloignez les petits objets métalliques tels que les
broches de l’écouteur du combiné.
CONSERVEZ CES INSTRUCTIONS
7
FCC part 15
This device complies with Part 15 of the FCC rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct the
interference at the user’s expense.
WARNING: Changes or modications to this equipment not expressly approved
by the party responsible for compliance could void the user’s authority to operate
the equipment.
Industry Canada
This Class A digital apparatus complies with Canadian requirements:
CAN ICES-3 (A)/NMB-3(A).
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du
Canada.
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
Privacy of communications may not be ensured when using this telephone.
The term ‘’IC:‘’ before the certication/registration number only signies that the
Industry Canada technical specications were met.
This product meets the applicable Innovation, Science and Economic
Development Canada technical specications.
8
Parts Checklist
Your telephone package contains the following items. Save your sales receipt
and original packaging in the event warranty service is necessary.
About this Guide
This quick start guide provides a reference for the external features of the phone
and basic installation instructions.
Please refer to the VSP845G Deskset User Guide for complete installation and
operation instructions. You can download the guide from
businessphones.vtech.com.
For customer service or product information, visit our website at
businessphones.vtech.com or call 1 (888) 370-2006.
Quick Start Guide
Handset and
handset cord
Deskset base Deskset stand
Ethernet cable
VSP845G AW Rosalyn Chun / 23 Nov 2017 / V5
Quick
Start
Guide
9
Quick Reference Guide
External Features and Controls
SCREEN
FUNCTION KEYS
NAVIGATION KEYS
CASING
MICROPHONE
AUDIO
CONTROL KEYS
MWI KEY & LED
PROGRAMMABLE
KEYS P1-P48 with
FUNCTION KEY
SCREEN
ALPHANUMERIC
KEYPAD
PAGE KEY for
FUNCTION KEY
SCREEN
DEDICATED,
CUSTOMIZABLE
FUNCTION KEYS
CALL LED
Blinking fast: Incoming call
Steady light: Busy
10
Deskset Installation
This section assumes that your network infrastructure is established and that your
IP PBX phone service has been ordered and congured for your location. For
more information about installation options and phone setup, see the VSP845G
Deskset User Guide and the VSP845G Deskset Administrator and Provisioning
Manual, available at businessphones.vtech.com.
You can power the phone using a compatible VTech AC power adapter or using
Power over Ethernet (PoE) from your network. (The phone requires PoE Class 3.) If
you are not using PoE, install the phone near a power outlet not controlled by a wall
switch. The phone can be placed on a at surface or vertically mounted on the wall.
Avoid placing the deskset too close to:
Communication devices such as television sets, DVD players, or other
cordless telephones
Excessive heat sources
Noise sources such as a window with trafc outside, motors, microwave
ovens, refrigerators, or uorescent lighting
Excessive dust sources such as a workshop or garage
Excessive moisture
Extremely low temperature
Mechanical vibration or shock such as on top of a washing machine or work
bench.
Attaching the Footstand
1. Insert the snap-ts on the longer ends of the footstand into the holes marked
j (Fig. 1 and 2).
Fig. 1 Fig. 2
D345
PN 00004260
EXT DC 5V NET PC USB AUDIO
S/N
MAC address
Use only power supply
listed in the user guide.
Snom Technology AG
Wittestr. 30 G · 13509 Berlin · Germany
© 20xx by Snom Technology AG. All Rights Reserved. Made in Xxxxxxx
Rn
Adapter 5V 2A
PoE 48V 0.25A
11
22
2
1
11
Fig. 3
To wall mount the phone, see the
VSP845G User Guide.
2. Tilt the footstand towards you and insert the snap-ts on the shorter ends into
the holes marked k (Fig. 1 and 2).
3. Place the cables (Ethernet, etc.) in the cable slots of the footstand (Fig. 3).
Detaching the Footstand
Lightly press the snap-ts of the footstand inwards (Fig. 1) and, at the same time,
tilt the footstand backwards and lift it from its anchorage in the mounting holes
(Fig. 2).
Fig. 2Fig. 1
12
Connecting the phone
D345
PN 00004260
EXT DC 5V NET PC USB AUDIO
S/N
MAC address
Use only power supply
listed in the user guide.
Snom Technology AG
Wittestr. 30 G · 13509 Berlin · Germany
© 20xx by Snom Technology AG. All Rights Reserved. Made in Xxxxxxx
Rn
Adapter 5V 2A
PoE 48V 0.25A
snom technical datasheet (P-DIN_A4) Version 1.2.1. /// Nov 2009
company snom technology AG revision PS No. ERP No. scale
total
pages page
model snom 370 5 4.12. 00001438 1:1 1
1
product LABEL TYPE prepared by Martin Taube
filename type_label_snom370_rev5.pdf checked by
created 2007-10-09 approved by
last saved 2009-11-04 status
139.5
39.5
N14647
XXXYY88888899999
0 0 0 4 1 3 2 A 0 0 4 4
AB
1. Bar code System: Code 128
2. Material: white ART paper
3. Black printing / SIZE: 139.5(W)X39.5(H)mm
4. Tolerence: ±0.2mm
6. Print content:
A.
B. Bar code: MAC Address same as mainboard label
7. attach onto the backside of the phone
Serial Number (5 digits)
DDMMYY day, month, year (only last two digits)
Product of factory abbreviation - provided by snom (2 digits)
Country of Origin - ISO 3166-1 alpha-3 (3 digits)
snom technical datasheet (P-DIN_A4) Version 1.2.1. /// Nov 2009
company snom technology AG revision PS No. ERP No. scale
total
pages page
model snom 370 5 4.12. 00001438 1:1 1
1
product LABEL TYPE prepared by Martin Taube
filename type_label_snom370_rev5.pdf checked by
created 2007-10-09 approved by
last saved 2009-11-04 status
139.5
39.5
N14647
XXXYY88888899999
0 0 0 4 1 3 2 A 0 0 4 4
AB
1. Bar code System: Code 128
2. Material: white ART paper
3. Black printing / SIZE: 139.5(W)X39.5(H)mm
4. Tolerence: ±0.2mm
6. Print content:
A.
B. Bar code: MAC Address same as mainboard label
7. attach onto the backside of the phone
Serial Number (5 digits)
DDMMYY day, month, year (only last two digits)
Product of factory abbreviation - provided by snom (2 digits)
Country of Origin - ISO 3166-1 alpha-3 (3 digits)
snom technical datasheet (P-DIN_A4) Version 1.2.1. /// Nov 2009
company snom technology AG revision PS No. ERP No. scale
total
pages page
model snom 370 5 4.12. 00001438 1:1 1
1
product LABEL TYPE prepared by Martin Taube
filename type_label_snom370_rev5.pdf checked by
created 2007-10-09 approved by
last saved 2009-11-04 status
139.5
39.5
N14647
XXXYY88888899999
0 0 0 4 1 3 2 A 0 0 4 4
AB
1. Bar code System: Code 128
2. Material: white ART paper
3. Black printing / SIZE: 139.5(W)X39.5(H)mm
4. Tolerence: ±0.2mm
6. Print content:
A.
B. Bar code: MAC Address same as mainboard label
7. attach onto the backside of the phone
Serial Number (5 digits)
DDMMYY day, month, year (only last two digits)
Product of factory abbreviation - provided by snom (2 digits)
Country of Origin - ISO 3166-1 alpha-3 (3 digits)
snom technical datasheet (P-DIN_A4) Version 1.2.1. /// Nov 2009
company snom technology AG revision PS No. ERP No. scale
total
pages page
model snom 370 5 4.12. 00001438 1:1 1
1
product LABEL TYPE prepared by Martin Taube
filename type_label_snom370_rev5.pdf checked by
created 2007-10-09 approved by
last saved 2009-11-04 status
139.5
39.5
N14647
XXXYY88888899999
0 0 0 4 1 3 2 A 0 0 4 4
AB
1. Bar code System: Code 128
2. Material: white ART paper
3. Black printing / SIZE: 139.5(W)X39.5(H)mm
4. Tolerence: ±0.2mm
6. Print content:
A.
B. Bar code: MAC Address same as mainboard label
7. attach onto the backside of the phone
Serial Number (5 digits)
DDMMYY day, month, year (only last two digits)
Product of factory abbreviation - provided by snom (2 digits)
Country of Origin - ISO 3166-1 alpha-3 (3 digits)
snom technical datasheet (P-DIN_A4) Version 1.2.1. /// Nov 2009
company snom technology AG revision PS No. ERP No. scale
total
pages page
model snom 370 5 4.12. 00001438 1:1 1
1
product LABEL TYPE prepared by Martin Taube
filename type_label_snom370_rev5.pdf checked by
created 2007-10-09 approved by
last saved 2009-11-04 status
139.5
39.5
N14647
XXXYY88888899999
0 0 0 4 1 3 2 A 0 0 4 4
AB
1. Bar code System: Code 128
2. Material: white ART paper
3. Black printing / SIZE: 139.5(W)X39.5(H)mm
4. Tolerence: ±0.2mm
6. Print content:
A.
B. Bar code: MAC Address same as mainboard label
7. attach onto the backside of the phone
Serial Number (5 digits)
DDMMYY day, month, year (only last two digits)
Product of factory abbreviation - provided by snom (2 digits)
Country of Origin - ISO 3166-1 alpha-3 (3 digits)
USB Port 2.0,
Type/Typ A
Optional
If PoE not available
power adapter not included in delivery
13
Connecting the phone
The phone can be operated with Power over Ethernet (PoE) provided via the
network cable or, if PoE is not available in your network, with the separately
available 5V DC VTech power adapter VSP-PWR2000.
Plug the Ethernet (network) cable into the RJ45 connector labeled “NET”,
and plug the other end into the network side to establish a data link.
If PoE is not available, insert the plug of the power supply into the connector
labeled “5V DC” and hook up the plug to the wall outlet.
The second RJ45 connector, labeled “PC”, is for daisy-chaining further
Ethernet devices without the need for a second Ethernet connection line.
IMPORTANT INFORMATION
1. Use only a compatible VTech power adapter. To order a power adapter, visit
our website at businessphones.vtech.com or call 1 (888) 370-2006.
2. The power adapter is intended to be correctly oriented in a vertical or oor
mount position. The prongs are not designed to hold the plug in place if it is
plugged into a ceiling, under-the-table or cabinet outlet.
Initializing and registering the phone
Please note: You will need the registration information received from your
Internet service provider or your network administrator - normally the phone or
extension number, the password, and the registrar.
After you have set up the phone and connected it to the network as shown on
page 12, the phone begins to initialize.
Normally the initialization is completely automatic, using DHCP. If your network
does not support DHCP, you must obtain the IP address, netmask, IP gateway,
and DNS server from your Internet service provider or your network administrator
and enter them manually when you are asked to do so on the display.
Watch the display and, when asked to, make selections with and save
with .
1. Language. The default is English.
2. Time zone
3. Dial tone
4. Enter the account number. Save with .
5. Enter the registrar. Save with . The display now shows the idle screen:
For further information, please refer to the VSP845G User Guide.
14
Maintenance
Taking care of your telephone
Your telephone base contains sophisticated electronic parts, so you must
treat it with care.
Avoid rough treatment.
Place the corded handset down gently.
Save the original packing materials to protect your telephone base if you ever
need to ship it.
Avoid water
You can damage your telephone base if it gets wet. Do not use the corded
handset in the rain, or handle it with wet hands. Do not install the telephone
base near a sink, bathtub or shower.
Electrical storms
Electrical storms can sometimes cause power surges harmful to electronic
equipment. For your own safety, take caution when using electric appliances
during storms.
Cleaning your telephone
Your telephone base has a durable plastic casing that should retain its luster
for many years. Clean it only with a soft cloth slightly dampened with water or
a mild soap.
Do not use excess water or cleaning solvents of any kind.
Remember that electrical appliances can cause serious injury if used when
you are wet or standing in water. If the telephone base should fall into water,
DO NOT RETRIEVE IT UNTIL YOU UNPLUG THE POWER CORD AND
TELEPHONE LINE CORDS FROM THE WALL, then pull the unit out by the
unplugged cords.
15
Technical Specications
Operating temperature 32–122 °F (0–50 °C)
AC adapter output voltage 5.0 Vdc @ 2 A
AC adapter model number VTech model #: VSP-PWR2000
SIL model #: SSA-050200US
Connectors 2 x RJ45 (1 x LAN, 1 x PC)
2 x 4P4C (handset, optional wired headset)
1 x USB 2.0 type A
1 x proprietary connector for Expansion module
Ethernet 2 x IEEE 802.3 / 1 Gigabit switch
VTECH COMMUNICATIONS LTD.
A member of THE VTECH GROUP OF COMPANIES.
Distributed in the U.S.A. by VTech Communications Inc., Beaverton, Oregon 97008.
VTech is a registered trademark of VTech Holdings Limited.
Copyright © 2017 for VTECH COMMUNICATIONS LTD. All rights reserved.
Printed in China. Version 3, 12/17
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16

VTech VSP845G Guide de démarrage rapide

Catégorie
Téléphones
Taper
Guide de démarrage rapide

dans d''autres langues