LG GL-M612GPDR Le manuel du propriétaire

P/NO : MFL68488901

ENGLISH FRENCH ARABIC

Express Freeze

Smart Diagnosis(Optional)

Hygiene Fresh(Optional)

27

26

25

24

23

2

14

Lamp Replacement

Green Ion Door Cooling /

Ice Beam Door Cooling(Optional)

Inverter On feature(Optional)

3

WARNING

Keep ventilation openings, in the appliance enclosure or in

the built-in-structure, clear of obstruction.

Do not use mechanical devices or other means to accelerate

the defrosting process, other than those recommended by the

manufacturer.

Do not damage the refrigerant circuit.

Do not use electrical appliances inside the food storage

compartment, unless they are recommended by the

manufacturer.

The refrigerant and insulation blowing gas used in the

appliance requires special disposal procedures. When

disposal, please consult with services agent or a similarly

qualified person.

If gas used is R600a

This appliance contains a small amount of isobutane refrigerant

(R600a), natural gas with high environmental compatibility, but it is

also combustible. When transporting and installing the appliance,

care should be taken to ensure that no parts of the refrigerating

circuit are damaged. Refrigerant squirting out of the pipes could

ignite or cause an eye injury. If a leak is detected, avoid any naked

flames or potential sources of ignition and air the room in which the

appliance is standing for several minutes.

4

(*NOTE - 1,2,3 are applicable for Jordan Regulations and other countries as per applicability)

All electrical and electronic products should be disposed of separately from the

municipal waste stream via designated collection facilities appointed by the government

or the local authorities.

The correct disposal of your old appliance will help prevent potential negative consensus for the

environment and human health.

For more detailed information about the disposal of your old appliances, please contact your city

office, waste disposal service or the shop where you purchased the product.

Never startup an appliance showing any signs of damage. If in

doubt, consult your dealer.

5

Do not use or store

inflammable materials like

ether, benzene, alcohol,

medicine, LP gas, spray or

cosmetics

near or in the

refrigerator.

It may cause

explosion or fire.

Install in places away from the fire

such as the place

where flammable

gas is leaked.

It may cause fire.

6

like gasket

7

Completely empty inside before taking

out the container from the door.

8

9

10

Inverter-On feature (Optional)

Minimum requirement: UPS/ Inverter

should be in ON condition having

minimum 600VA capacity along with

minimum 120Ah capacity battery

connected with the refrigerator’s power

supply socket.

11

12

Green Ion Door

Cooling / Ice Beam

Door Cooling

(Optional)

GL-*5**/

GL-*6**

GL-*4**

(Factory Recommended Location)

13

14

*Refer Freezer control label inside freezer compartment

8

When the freezer compartment is not cold enough in winter, adjust the control for the freezer to

High (4~7 / 8 / ● / ).● ●

For achieving temperature in Freezing, Energy and Storage Test, Freezer control may be required

to set at “●” or “●●”

8

5

6 5 4

‘3’ or ‘5’.

‘3’ or ‘4’.

CONTROLS FOR REFRIGERATOR COMPARTMENT

Press ‘Hygiene Fresh’ button to operate hygiene fresh motor (optional).

0

Display ‘A’

Display ‘B’

- Press (c) button, refrigerator temperature will be down by 1 C.

- Press (d) button, refrigerator temperature will be up by 1 C.

OFF.

Power mode ON

by

Press ‘FRIDGE’ button to control refrigerator temperature.

15

EXPRESS FREEZE

When the refrigerator is first turned ON the EXPRESS

FREEZE feature can be turn ON. The compressor and

circulating fan operate at maximum cooling capacity

to quickly lower the refrigerator temperature.

It shuts off automatically.

If warm food is placed into the refrigerator, EXPRESS FREEZE can be started with the button on the control

panel. EXPRESS FREEZE will shut off when the temperature reaches the proper level or it can be

shut off manually by pressing the EXPRESS FREEZE button.

Display ‘A’

Display ‘B’

Display ‘A’

Display ‘B’

Note: This feature will be unlocked by itself,

if the refrigerator is switched off.

ICE MAKING (OPTIONAL)

16

GREEN ION DOOR COOLING /

ICE BEAM DOOR COOLING (OPTIONAL)

17

LAMP REPLACEMENT

NOTE : This product applies LED Lamp which cannot be replaced

by the user. Please contact authorized service centre for

the lamp replacement.

INVERTER-ON FEATURE (Optional)

1. While using this feature, the refrigerator will work on basic requirement as required by the product.

2. The results of the Inverter-On feature may vary depending on the number of appliances that are

running on inverter.

3. For optimum running of refrigerator during Inverter-On mode, it is recommended to switch off the

other appliances which are not in use.

4. It is recommended to confirm the quality of food items before consumption.

5. Ice cream etc. may get soften during the use of this feature, if situation arises so, it is

recommended to change the setting as per one’s choice.

(OPTIONAL)

18

SMART DIAGNOSIS (Only for Selected External Micom Models)

Smart diagnosis function is...

Use this function when calling the Customer Call Centre and receive precise diagnosis when the

Refrigerator malfunctions or fails. Use it only when advised by the consultant and not otherwise.

How to use the function

1. Close all refrigerator doors, and press and

hold display lock button to make it locked

state.

If the display is already in locked state, press and

hold lock button to reset the lock and press and

hold the lock button again to make it locked

state.

2. Press and hold fridge temperature button

for 3 seconds or longer. (All display screens

will be turned off, and in a while, 3 will be

displayed on the fridge temperature display

part.)

< Model with Hygiene Fresh Filter >

< Model without Hygiene Fresh> Filter >

3. Open all refrigerator compartment and

freezer compartment doors, and place the

telephone near the speaker hole at the top

right side.

Check if the speaking side(microphone) of the

telephone is toward the speaker hole.

4. Do not take away the telephone while data

is being transmitted.

During the data transmission for smart

diagnosis, wait with the telephone placed near

the speaker hole at the top right side. The

remaining time for data transmission is

displayed on the display screen.

5. After the completion of the data

transmission, listen to the explanation of the

consultant about the result of the smart

diagnosis.

When the data transmission is completed, along

with the display of the data transmission

completion, the refrigerator will be automatically

turned off and on a few seconds later. Listen to

the explanation of the consultant about the result

of the analyzed diagnosis and follow the

instructions.

Be aware!

Difference of the regional call qualities may have influence on the function.

If you use home phone, better communication performance will enable much better service.

Smart diagnosis data transmission may not be fluent due to call quality problem, and in such

case, smart diagnosis service may be difficult.

CAUTION

If it passes 5 minutes in locked state, smart

diagnosis function will not be activated, so be

careful.

CAUTION

The transmission sound may be irritating.

Do not take away the telephone until the sound

stops for good diagnosis.

19

1. Open all the doors of the refrigerator.

2. Press the refrigerator control (REF TEMP)

button for 3 sec or more.

3. If the buzzer sounds 4 times (Frequency of

SDS Buzzer is 2000Hz, 0.2sec Off/ 0.2sec On

4 times) place the phone near the speaker

hole in the top right hand side door hinge.

4. Ensure the microphone of the telephone is

towards the speaker hole.

CAUTION

The transmission sound may be irritating.

Do not take away the telephone until the sound

stops for good diagnosis.

SMART DIAGNOSIS (Only for Selected Internal Micom Models)

Smart diagnosis function is...

Use this function when calling the Customer Call Centre and receive precise diagnosis when the

Refrigerator malfunctions or fails. Use it only when advised by the consultant and not otherwise.

How to use the function

Be aware!

Difference of the regional call qualities may have influence on the function.

If you use home phone, better communication performance will enable much better service.

Smart diagnosis data transmission may not be successful if the call is made from a mobile phone

with poor network reception.

20

First, call LG service center. Only use the Smart Diagnosis feature when instructed to do so by the LG

call center agent.

5. Do not take away the telephone while data

is being transmitted.

6. During the data transmission for smart

diagnosis, hold the telephone 10cm away

from the speaker hole and avoid any

background noises. After inputting SDS,

SDS buzzer will ring. After completion of the

data transmission, the consultant will

explain the result of the smart diagnosis and

advice accordingly. When the data

transmission is completed, the refrigerator

will be automatically turned off and on a few

seconds later.

La page est en cours de chargement...

LG GL-M612GPDR Le manuel du propriétaire

Ce manuel convient également à

LG GL-M612GPDR Le manuel du propriétaire

Documents connexes