3
Consumer Information
Double-Drawer Refrigerator
If you received
a damaged
appliance
The warranty does not cover damage
caused after delivery.
Immediately contact the dealer (or builder)
that sold you the double-drawer refrigerator.
Remove
packaging
Before using, be sure all packing materials
and tape have been removed.
To assure no damage is done to the finish of
the product, the safest way to remove the
adhesive left from packaging tape on new
appliances is an application of household
liquid detergent. Apply with
a soft cloth and allow to soak. Wipe dry
and then apply an appliance polish to
thoroughly clean and protect the surface.
If you need
service
To obtain service, see the Consumer Services
page in the back of this manual.
We are proud of our service and want you
to be pleased. If for some reason you are not
happy with the service you receive, here are
steps to follow for further help.
For customers in the USA:
FIRST, contact the people who serviced your
appliance. Explain why you are not pleased.
In most cases, this will solve the problem.
NEXT, if you are still not pleased, write
DOOWKHGHWDLOV³LQFOXGLQJ\RXUSKRQH
QXPEHU³WR
Manager, Customer Relations
GE Appliances
Appliance Park
Louisville, KY 40225
For customers in Canada:
FIRST, contact the people who serviced your
appliance. Explain why you are not pleased.
In most cases, this will solve the problem.
NEXT, if you are still not pleased, write
DOOWKHGHWDLOV³LQFOXGLQJ\RXUSKRQHQXPEHU
to:
Manager, Consumer Relations
Mabe Canada Inc.
1 Factory Lane, Suite 310
Moncton, N.B. E1C 9M3
After
installation
is completed
• Promptly inspect your new Monogram
double-drawer refrigerator. If it has been
damaged, contact the Installer or Dealer
immediately.
• This double-drawer refrigerator must be
properly leveled to ensure correct drawer
alignment and drawer closure. Contact the
Installer if the unit is not level.
• The unit should be centered in the opening.
The front face of the drawer will be flush
with adjacent cabinetry. Contact the
installer if clearance is not correct.
• Test the drawer. Carefully open and close
the drawer. The drawer should not rub or
catch on adjacent cabinetry. Notify the
installer if the drawer makes contact with
cabinetry.
Please Contact the Installer or Dealer if
you experience any of these problems.
Your custom panel (ZIDI240 model only)
double-drawer refrigerator is shipped with
two toekicks, a stainless steel and a black
toekick. For shipping purposes, one of
the toekicks will be secured to the back or
on the inside of the unit, and the second will
be installed on the unit. Keep the unused
toekick and other unused or removed parts
for possible future use.
Save time
& money
Before you request service, check the
Problem Solver in the back of this manual.
It lists causes of minor operating problems
that you can correct yourself.