Tascam DR-05 Le manuel du propriétaire

Taper
Le manuel du propriétaire
D01231600D
DR-05
Linear PCM Recorder
TEAC CORPORATION
https://tascam.jp/jp/
Phone: +81-42-356-9143
1-47 Ochiai, Tama-shi, Tokyo 206-8530 Japan
TEAC AMERICA, INC.
http://tascam.com/
Phone: +1-323-726-0303
1834 Gage Road, Montebello, California 90640 USA
TEAC MEXICO, S.A. de C.V.
http://teacmexico.net/
Phone: +52-55-5010-6000
Río Churubusco 364, Colonia Del Carmen, Delegación Coyoacán,
CP 04100, México DF, México
TEAC UK Ltd.
http://tascam.eu/
Phone: +44-8451-302511
2 Huxley Road, Surrey Research Park, Guildford, GU2 7RE,
United Kingdom
TEAC EUROPE GmbH
http://tascam.eu/
Phone: +49-611-71580
Bahnstrasse 12, 65205 Wiesbaden-Erbenheim, Germany
TEAC SALES & TRADING(SHENZHEN) CO., LTD
Phone: +86-755-88311561~2
Room 817, Block A, Hailrun Complex, 6021 Shennan Blvd., Futian District,
Shenzhen 518040, China
Printed in China
ENGLISH
FRANÇAIS
ESPAÑOL
DEUTSCH
ITALIANO
RUSSIAN
OWNER'S MANUAL
MODE D’EMPLOI
MANUAL DEL USUARIO
BEDIENUNGSANLEITUNG
MANUALE DI ISTRUZIONI
РУКОВОДСТВО ПОЛЬЗОВАТЕЛЯ
2 TASCAM DR-05
TASCAM is a trademark of TEAC CORPORATION, registered in the U.S.
and other countries.
microSDHC Logo is a trademark of SD-3C, LLC.
MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS
and Thomson.
Supply of this product does not convey a license nor imply any right to
distribute MPEG Layer-3 compliant content created with this product in
revenue-generating broadcast systems (terrestrial, satellite, cable and/
or other distribution channels), streaming applications (via Internet,
intranets and/or other networks), other content distribution systems
(pay-audio or audio-on-demand applications and the like) or on physical
media (compact discs, digital versatile discs, semiconductor chips, hard
drives, memory cards and the like). An independent license for such use is
required. For details, please visit http://mp3licensing.com.
Other company names, product names and logos in this document are
the trademarks or registered trademarks of their respective owners.
TASCAM DR-05 3
Owners Manual
IMPORTANT SAFETY PRECAUTIONS
INFORMATION TO THE USER
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more
of the following measures.
a) Reorient or relocate the receiving antenna.
b) Increase the separation between the equipment and
receiver.
c) Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
d) Consult the dealer or an experienced radio/TV technician
for help.
CAUTION
Changes or modifications to this equipment not expressly
approved by TEAC CORPORATION for compliance could void
the users authority to operate this equipment.
For U.S.A.
For Canada
THIS CLASS B DIGITAL APPARATUS COMPLIES WITH
CANADIAN ICES-003.
CET APPAREIL NUMERIQUE DE LA CLASSE B EST CONFORME
A LA NORME NMB-003 DU CANADA.
Declaration of Conformity
Model Number : DR-05
Trade Name : TASCAM
Responsible party : TEAC AMERICA, INC.
Address : 1834 Gage Road, Montebello, California,
U.S.A.
Telephone number : 1-323-726-0303
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device must
accept any interference received, including interference that
may cause undesired operation.
This product complies with the European
Directives request and the other
Commission Regulations.
IMPORTANT SAFETY INSTRUCTIONS
1 Read these instructions.
2 Keep these instructions.
3 Heed all warnings.
4 Follow all instructions.
5 Do not use this apparatus near water.
6 Clean only with dry cloth.
7 Do not block any ventilation openings. Install in accor-
dance with the manufacturers instructions.
8 Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers)
that produce heat.
9 Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. If
the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
10 Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
11 Only use attachments/accessories specified by the
manufacturer.
12 Use only with the cart, stand,
tripod, bracket, or table specified
by the manufacturer, or sold with
the apparatus. When a cart is used,
use caution when moving the cart/
apparatus combination to avoid injury from tip-over.
13 Unplug this apparatus during lightning storms or when
unused for long periods of time.
14 Refer all servicing to qualified service personnel. Servicing
is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.
iThe apparatus draws nominal non-operating power from
the AC outlet with its POWER or STANDBY/ON switch not in
the ON position.
iThe mains plug is used as the disconnect device, the
disconnect device shall remain readily operable.
iCaution should be taken when using earphones or
headphones with the product because excessive sound
pressure (volume) from earphones or headphones can
cause hearing loss.
iIf you are experiencing problems with this product, contact
TEAC for a service referral. Do not use the product until it
has been repaired.
CAUTION
iDo not expose this apparatus to drips or splashes.
iDo not place any objects filled with liquids, such as vases,
on the apparatus.
iDo not install this apparatus in a confined space such as a
book case or similar unit.
iThe apparatus should be located close enough to the AC
outlet so that you can easily grasp the power cord plug at
any time.
iIf the product uses batteries (including a battery pack or
installed batteries), they should not be exposed to sunshine,
fire or excessive heat.
4 TASCAM DR-05
iCAUTION for products that use replaceable lithium batteries:
there is danger of explosion if a battery is replaced with an
incorrect type of battery. Replace only with the same or
equivalent type.
CAUTIONS ABOUT BATTERIES
This product uses batteries. Misuse of batteries could cause a
leak, rupture or other trouble. Always abide by the following
precautions when using batteries.
iNever recharge non-rechargeable batteries. The batteries
could rupture or leak, causing fire or injury.
iWhen installing batteries, pay attention to the polarity
indications (plus/minus (¥/^) orientation), and install
them correctly in the battery compartment as indicated.
Putting them in backward could make the batteries rupture
or leak, causing fire, injury or stains around them.
iWhen you store or dispose batteries, isolate their terminals
with insulation tape or something like that to prevent them
from contacting other batteries or metallic objects.
iWhen throwing used batteries away, follow the disposal
instructions indicated on the batteries and the local disposal
laws.
iDo not use batteries other than those specified. Do not mix
and use new and old batteries or different types of batteries
together. The batteries could rupture or leak, causing fire,
injury or stains around them.
iDo not carry or store batteries together with small metal
objects. The batteries could short, causing leak, rupture or
other trouble.
iDo not heat or disassemble batteries. Do not put them in
fire or water. Batteries could rupture or leak, causing fire,
injury or stains around them.
iIf the battery fluid leaks, wipe away any fluid on the battery
case before inserting new batteries. If the battery fluid gets
in an eye, it could cause loss of eyesight. If fluid does enter
an eye, wash it out thoroughly with clean water without
rubbing the eye and then consult a doctor immediately. If
the fluid gets on a persons body or clothing, it could cause
skin injuries or burns. If this should happen, wash it off with
clean water and then consult a doctor immediately.
iThe unit power should be off when you install and replace
batteries.
iRemove the batteries if you do not plan to use the unit for a
long time. Batteries could rupture or leak, causing fire, injury
or stains around them. If the battery fluid leaks, wipe away
any fluid on the battery compartment before inserting new
batteries.
iDo not disassemble a battery. The acid inside the battery
could harm skin or clothing.
8For European Customers
Disposal of electrical and electronic
equipment
(a) All electrical and electronic equipment should be
disposed of separately from the municipal waste stream
via designated collection facilities appointed by the
government or the local authorities.
(b) By disposing of the electrical and electronic equipment
correctly, you will help save valuable resources and
prevent any potential negative effects on human health
and the environment.
(c) Improper disposal of waste equipment can have serious
effects on the environment and human health as a result
of the presence of hazardous substances in electrical and
electronic equipment.
(d) The crossed out wheeled dust bin
symbol indicates that electrical and electronic
equipment must be collected and disposed of
separately from household waste.
(e) The return and collection systems are available
to the end users. For more detailed information
about disposal of old electrical and electronic equipment,
please contact your city office, waste disposal service or
the shop where you purchased the equipment.
Disposal of batteries and/or accumulators
(a) Waste batteries and/or accumulators should be disposed
of separately from the municipal waste stream via desig-
nated collection facilities appointed by the government
or the local authorities.
(b) By disposing of waste batteries and/or accumulators
correctly, you will help save valuable resources and
prevent any potential negative effects on human health
and the environment.
(c) Improper disposal of waste batteries and/or accumulators
can have serious effects on the environment and human
health as a result of the presence of hazardous substances
in batteries and/or accumulators.
(d) The crossed out wheeled dust bin
symbol indicates that batteries and/or
accumulators must be collected and disposed
of separately from household waste.
If the battery or accumulator contains more
than the specified values of lead (Pb), mercury
(Hg), and/or cadmium (Cd) defined in the Battery
Directive (2006/66/EC), then the chemical symbols for
lead (Pb), mercury (Hg) and/or cadmium (Cd) will be
indicated beneath the crossed out wheeled dust bin
symbol.
(e) The return and collection systems are available to the end
users. For more detailed information about disposal of
waste batteries and/or accumulators, please contact your
city office, waste disposal service or the shop where you
purchased them.
Pb, Hg, Cd
TASCAM DR-05 5
Contents
Introduction.......................................................................................... 6
Included items ..................................................................................... 6
Precautions for placement and use ............................................ 6
Beware of condensation .................................................................. 6
Cleaning the unit ................................................................................ 6
Using the TEAC Global Site ............................................................. 6
About microSD cards ........................................................................ 6
User registration ................................................................................. 6
Names and Functions of Parts ....................................................... 7
Top panel ............................................................................................................7
Front panel ......................................................................................................... 7
Rear panel ...........................................................................................................7
Left side panel..................................................................................................7
Right side panel ..............................................................................................7
Bottom Panel .................................................................................................... 7
Home Screen ........................................................................................ 8
Preparation ........................................................................................... 8
Powering the unit ..........................................................................................8
Starting up the unit ......................................................................................9
Selecting a language...................................................................................9
Setting the built-in clock ..........................................................................9
Shutting down ................................................................................................9
Connecting monitors and headphones.........................................9
Basic operation procedures ........................................................... 9
Menu structure................................................................................................9
Recording ............................................................................................10
Recording Screen .......................................................................................10
About recording standby ......................................................................10
Menu structure.............................................................................................10
Manually adjusting the input level..................................................10
Using the Level Control Function .................................................... 11
Recording ......................................................................................................... 11
Using the low-cut filter ........................................................................... 11
Playback ............................................................................................... 11
Playback Control screen ......................................................................... 11
Menu structure.............................................................................................12
Playing back recordings ......................................................................... 12
Adjusting the playback volume ........................................................ 12
Selecting files for playback (skipping) ..........................................12
Quick Operations .............................................................................. 12
QUICK button overview ......................................................................... 12
Connecting with a Computer ...................................................... 12
Connecting with a computer using USB ..................................... 12
Exchanging files with a computer ................................................... 12
Disconnecting from a computer ......................................................12
Settings and Information .............................................................. 12
Turning the built-in speaker off ......................................................... 12
System Settings ...........................................................................................12
Quick reference for using various functions.......................... 13
Message................................................................................................16
Troubleshooting ............................................................................... 17
Specifications ..................................................................................... 18
Ratings................................................................................................................18
Inputs and outputs .................................................................................... 18
Audio performance ...................................................................................18
Recording times...........................................................................................18
General .............................................................................................................. 18
Introduction
Thank you very much for purchasing the TASCAM DR-05 Linear
PCM Recorder.
Before connecting and using this unit, please take time to
read this manual thoroughly to ensure you understand how to
properly set it up and connect it, as well as the operation of its
many useful and convenient functions. After you have finished
reading this manual, please keep it in a safe place for future
reference.
This Owner's Manual explains the main functions of this unit.
Please see the Reference Manual for information about all the
unit's functions.
You can also download this Owner's Manual and the Reference
Manual from the TEAC Global Site (http://teac-global.com/).
Included items
This product includes the following items.
Take care when opening the package to avoid damaging the
items. Keep the packing materials for transportation in the
future.
Please contact the store where you purchased this unit if any
of these items are missing or have been damaged during
transportation.
iMain unit .......................................................................................................× 1
imicroSD card (in the unit) ..................................................................× 1
iAA alkaline batteries ..............................................................................× 2
iUSB cable (80 cm) ...................................................................................× 1
iOwner's Manual (this document)
including warranty .................................................................................× 1
6 TASCAM DR-05
Precautions for placement and use
iThe environmental temperature operating range of this unit
is 0–40°C (32–104°F).
iDo not install this unit in the following types of locations.
Doing so could degrade the sound quality and/or cause
malfunctions.
Places with significant vibrations
Near windows or other places exposed to direct sunlight
Near heaters or other extremely hot places
Extremely cold places
Places with bad ventilation or high humidity
Very dusty locations
iIf this unit is placed near a power amplifier or other device
with a large transformer, it could cause a hum. If this occurs,
increase the distance between this unit and the other
device.
iThis unit could cause color irregularities on a TV screen or
noise from a radio if used nearby. If this occurs, use this unit
farther away.
iThis unit might produce noise if a mobile phone or other
wireless device is used nearby to make calls or send or
receive signals. If this occurs, increase the distance between
this unit and those devices or turn them off.
iTo enable good heat dissipation, do not place anything on
top of this unit.
iDo not place this unit on top of a power amplifier or other
device that generates heat.
Beware of condensation
If the unit is moved from a cold to a warm place, or used
after a sudden temperature change, there is a danger of
condensation; vapor in the air could condense on the internal
mechanism, making correct operation impossible. To prevent
this, or if this occurs, let the unit sit for one or two hours at the
new room temperature before using it.
Cleaning the unit
Use a dry soft cloth to wipe the unit clean. Do not wipe with
chemical cleaning cloths, thinner, alcohol or other chemical
agents. Doing so could damage the surface or cause discolor-
ation.
Using the TEAC Global Site
You can download this Owners Manual and the Reference
Manual necessary for this unit from the TEAC Global Site (http://
teac-global.com/).
1. Open the TEAC Global Site (http://teac-global.com/).
2. In the TASCAM Downloads section, click the desired
language to open the Downloads website page for that
language.
NOTE
If the desired language does not appear, click Other
Languages.
3. Click the product name in the “Search by Model Name
section to open the Downloads page for that product.
4. Select and download the Owners Manual and the
Reference Manual that are needed.
About microSD cards
Please refer to the TEAC Global Site (http://teac-global.com)
to learn more on the list of compatible SD cards, or contact the
TASCAM customer support service.
User registration
Customers in the USA, please visit the TASCAM website (http://
tascam.com/) to register as a user online.
Names and Functions of Parts
Top panel
1 Built-in stereo microphone
Omnidirectional stereo electret condenser microphone.
2 PEAK indicator
Lights when the input volume is too high.
3 Display
4 ¤(HOME) [8] button
5 + button
6 MENU button
7 . button
8 PB CONT button
9 – button
0 REC indicator
The indicator flashes during recording standby.
The indicator lights while recording.
TASCAM DR-05 7
q RECORD [0] button
w QUICK button
e / button
r 7 button
t MARK button
Front panel
y Strap attachment
Rear panel
u MIC/EXT IN jack
Left side panel
i /LINE OUT jack
o HOLD switch
Right side panel
p USB port
a microSD card slot
Bottom Panel
s Mono speaker
d Tripod attachment screw thread (1/4-inch)
f Battery compartment
Home Screen
This is the screen that is usually shown when the unit is
stopped.
1 Playback speed setting status
One of the following icons appears according to the
playback speed setting.
Icon Playback speed
×1.0
×1.1 – ×1.5
×0.5 – ×0.9
Playback speed not controllable
2 Loop/repeat playback status
: Single playback
: Single track repeat playback
: All track repeat playback
: Loop playback
3 Monitor Mix function status
: Monitor Mix off
: Monitor Mix on
4 Effect on/off status
This icon shows whether the effect is on or off.
: built-in effect off
: built-in effect on
8 TASCAM DR-05
5 Power supply status
When a battery is being used, a battery icon shows the
amount of battery power remaining in bars ( , , ).
The battery is almost dead and the power will soon turn off
if the icon has no bars .
When using a TASCAM PS-P520E AC adapter (sold
separately) or USB bus power, appears.
6 Recorder operation status
This icon shows the recorder operation status.
Indicator Meaning
8Stopped
9Paused
7Playing back
,Searching forward
mSearching backward
/Skipping forward
.Skipping backward
7 Level meter
These show the levels of the input and playback signals.
When the Monitor Mix function is ON, the level of the
combined input and playback sounds is shown.
8 File information
The file name or tag information of the file currently being
played back is shown.
9 Playback position
The current playback position is shown by a bar.
0 Elapsed time
Shows the elapsed time (hours: minutes: seconds) of the
currently playing track.
q Remaining time
Shows the remaining playback time of the current track
(hours: minutes: seconds).
w Peak value in decibels (dB)
The maximum level that occurs in a fixed period of time is
displayed digitally.
e Monitoring output
: Signal output from headphones
: Signal output from the built-in speaker
r Playback area
This shows the current playback file area.
ALL All files in the MUSIC folder
FOLDER All files in the selected folder
P.LIST All files added to the playlist
t Loop playback IN (starting) and OUT (ending) points
The set starting and ending points of the loop are shown.
When the IN point is set, the icon appears at the
corresponding position.
When the OUT point is set, the icon appears at the
corresponding position.
y Playback file number/total number of files
The total number of files in the playback area and the
number of the current file are shown.
Preparation
Powering the unit
8Using AA batteries
1. Slide open the battery compartment cover on the back of
the unit.
2. Install 2 AA batteries with their ¥ and ^ marks as shown
in the battery compartment .
3. Close the battery compartment cover.
iUse the BATTERY TYPE item of the SYSTEM menu to set
the type of battery in order to accurately show the amount
of power remaining and allow the unit to accurately
determine whether enough power is available for proper
operation. (By default, this is set to ALKAL for alkaline
batteries.)
Starting up the unit
Press and hold the ¤(HOME) [8] button until TASCAM
DR-05 (start-up screen) appears.
The Home Screen appears when the unit starts up.
TASCAM DR-05 9
Selecting a language
The first time you turn a new unit on after purchase, the
following setting must be made.
A screen appears to set the language shown on the display.
Press the + or button to move the cursor and select (highlight
with light letters on a black background) the language to be
shown on the display.
English : use English
日本
: use Japanese
Français : use French
Español : use Spanish
Deutsch : use German
Italiano : use Italian
Русский
: use Russian
中文 : use Chinese
After selection, press the 7 button to confirm it.
NOTE
You can change this setting with the SYSTEM screen
LANGUAGE item. (See “Quick reference for using various
functions” on page 15.)
Setting the built-in clock
When the unit is started up for the first time (or when the
built-in clock is reset after being left unused without batteries),
the DATE/TIME screen appears before the start-up screen to
allow the date and time to be set.
Use the .// and +/ buttons to set the date and time,
and press the 7 button to confirm.
Shutting down
Press and hold the ¤(HOME) [8] button until LINEAR PCM
RECORDER appears on the display.
The power turns off after the unit completes its shutdown
process.
Connecting monitors and headphones
To listen with headphones, connect them to the /LINE OUT
jack.
To listen with an external monitoring system (powered monitor
speakers or an amplifier and speakers), connect it to the /
LINE OUT jack.
Headphones Powered monitor speakers
or amplifier and speakers
Basic operation procedures
1. Press the MENU button to open the MENU screen.
2. Use the + and buttons to select (highlight) menu items,
and use the 7 button to open that setting screens.
3. Use the + and buttons to select (highlight) the setting
item, and press the 7 button.
4. Use the / or 7 button to move the cursor to the right
and highlight the setting value.
5. Use the + and buttons to change the setting.
6. Press the . button to move the cursor left if you want
to set a different item in the same menu.
7. Repeat step 3 to 6 as necessary to set other items as
necessary.
8. When finished, press the ¤(HOME) [8] button to
return to the Home Screen.
Menu structure
MENU
REC SETTING Make recording settings
PLAY SETTING Make playback settings
BROWSE Work with files and folders on the
SD card
SPEAKER Turn the built-in speaker on/off
OTHERS Open the OTHERS submenu
INFORMATION View information
MONITOR MIX Set the monitor mix function
TUNER Use the tuner
EFFECT Make effect settings
FILE NAME Make file name settings
DATE/TIME Set the date and time
SYSTEM Make system settings
10 TASCAM DR-05
Recording
Recording Screen
This screen appears when recording or in recording standby.
1 Level control function status
: Level control off
: Peak reduction on
: Automatic level control on
: Limiter on
2 Plug-in power status
: Plug-in power off
: Plug-in power on
3 Pre or Auto recording function status
appears when the prerecording function is ON.
appears when the auto recording function is ON,
and the unit is recording.
4 Low cut filter on/off status
: Low cut filter off
: Low cut filter on
5 Auto tone function status
This icon shows whether the auto tone function is on or
off. (See "Using the auto tone function" in the Reference
Manual.
: Auto tone off
: Auto tone on
6 Recorder operation status
This icon shows the recorder operation status.
Indicator Meaning
8Recording standby
9Recording paused (recording standby)
0Recording
7 Level meters
The input signal levels are shown.
When overdubbing, the levels of the mixed input and
playback sounds are shown.
8 File name
The file name that will automatically be given to the
recorded file is shown.
9 Recording mode
The recording file format, sampling frequency and stereo/
mono ( ST / MONO ) status are shown.
0 Elapsed recording time
The elapsed recording time of the file appears as hours:
minutes: seconds.
q Remaining recording time
The remaining recording time until the selected maximum
file size is reached is shown (in hours: minutes: seconds).
If the remaining recording time on the microSD card is
less, however, the remaining recording time on the card is
shown.
w Peak value in decibels (dB)
The peak recording level value is shown digitally.
e Input level button display
The . and / buttons are shown as a reminder that
they can be used to change the input level.
About recording standby
This unit has a recording standby function like that of a profes-
sional recorder. In recording standby mode, you can adjust the
input level, for example, and then start recording quickly.
When in recording standby, the REC indicator blinks and the
recording screen appears.
Menu structure
REC SETTING
FORMAT Set the file format
WAV : 16bit / 24bit,
MP3 : 32320k bps
SAMPLE Set the sampling frequency
4 4 .1 k / 48k / 96k (Hz)
(96kHz for WAV only)
TYPE Set to mono or stereo
MONO , STEREO
SIZE Set the maximum file size
64M / 128M / 256M / 512M / 1G / 2G(B)
MIC POWER Turn plug-in power on/off
ON , OFF
LOW CUT Set the low-cut filter
OFF , 40Hz , 80Hz , 120Hz
PRE REC Set the pre-recording function
ON , OFF
AUTO TONE Set the auto tone function
OFF , HEAD , HEAD+TAIL
TONE SECS Set the length of the auto tone
0.5SEC. , 1SEC. , 2SEC. , 3SEC.
TONE VOL Set the volume of the auto tone
-12dB , -18dB , -24dB , -30dB , -36dB
AUTO REC Set the auto-recording function
MODE : OFF , NEW FILE , MARK
LEVEL : -6dB , -12dB , -24dB , -48dB
Manually adjusting the input level
1. Press the RECORD [0] button to enter recording standby.
2. Use the . and / buttons to adjust the input level.
Meters that show the input level settings appear at the
bottom of the display.
If the input is too high, the PEAK indicator on the upper left
above the display lights just before recorded sound would
distort.
A b mark is provided at -12dB on the level meters. Set the
recording level so that level changes occur near this mark
without causing the PEAK indicator to light red.
TASCAM DR-05 11
Using the Level Control Function
You can set the level control function for recording through a
microphone.
1. Press the RECORD [0] button to begin recording standby.
2. Press the QUICK button to open the quick menu.
3. Select (highlight) LEVEL CTRL and press the 7 button to
open the settings screen.
4. Use the + and buttons to select (highlight) the desired
function, and press the 7 button to enable it and return
to the recording screen.
8PEAK REDUCTION
The input volume is reduced automatically to an appropriate
level when excessively large signals come in. The recording
level can be raised manually when desired. This function is
suitable for recording music with volume changes that affect
the sound negatively. After making the setting, the set level is
retained even if it is turned off.
8AUTO LEVEL
Using this function, the recording level is automatically
increased when the input sound is too quiet or decreased
when it is too loud. This function is useful for recording
meetings, for example. In this mode, the recording level cannot
be changed manually.
8LIMITER
This function prevents distortion when signals that are too
loud are input suddenly. This is useful when you do not want
to change the recording level.
In this mode, the recording level can be changed manually
even when recording.
Recording
1. Press the RECORD [0] button to enter recording standby.
2. Press the RECORD [0] button again to start recording.
3. Press the ¤(HOME) [8] button to finish recording.
When recording starts, the REC indicator lights continuously,
and the display shows the elapsed recording time and the
remaining recording time.
8Pausing recording
You can pause recording and then continue recording in the
same file.
1. When recording, press the RECORD [0] button again.
2. Press the RECORD [0] button again to resume recording.
Using the low-cut filter
Use the low-cut filter if you want to cut noise and other sounds
at low frequencies. This function can be used to reduce air-con-
ditioning noise and unpleasant wind noise, for example.
1. Select MENU w REC SETTING and press the 7 button.
2. Set the LOW CUT item on the REC SETTING screen.
Options : 40Hz , 80Hz , 120Hz , OFF
The higher the number (frequency) is, the wider the band of
low frequencies that will be cut.
Playback
Playback Control screen
During playback or when stopped, press the PB CONT button
to open the Playback Control screen.
Recording is not possible when this screen is open. Use the
. and / buttons to skip to IN/OUT points and the file
beginning/end. You cannot skip to the previous or next file.
1 Loop playback status
The icon appears when loop playback is enabled.
2 Playback speed
This shows the playback speed as a multiple of the normal
speed. VSA appears on the left when variable speed
audition, which allows tempo to be changed without
changing pitch, is enabled.
3 Playback position display
The current playback position is shown by a bar.
4 Loop playback IN (starting) and OUT (ending) points
The set IN (starting) and OUT (ending) points of the loop are
shown.
When the IN point is set, the icon appears at the corre-
sponding position.
When the OUT point is set, the icon appears at the corre-
sponding position.
5 Usable buttons
The shown buttons are available when the Playback Control
screen is open.
MARK : Create or delete an IN or OUT point.
MENU : Turn loop playback ON or OFF.
12 TASCAM DR-05
Menu structure
PLAY SETTING
AREA Set the playback area
ALL FILES , FOLDER , PLAYLIST
REPEAT Set the repeat mode
CONTINUOUS , SINGLE ,
1 REPEAT , ALL REPEAT
PLAYEQ Set the playback equalizer
OFF , TREBLE + / - , MIDDLE + / - ,
BASS + / -
JUMPBACK Set jump-back playback
OFF , 1SEC. 10SEC. , 20SEC. , 30SEC.
Playing back recordings
When the Home Screen is open and playback is stopped, press
the 7 button to start playback.
8Pausing
When the Home Screen is open and a track is playing back,
press the ¤(HOME) [8] button to pause playback at the
current position.
8Stopping
Press the ¤(HOME) [8] button when paused to return to
the beginning of the playback file and stop.
8Searching backward and forward
When the Home Screen is open and a track is playing back or
stopped, press and hold the . or / button to search
backward or forward.
Adjusting the playback volume
When the Home Screen is open, use the + and − buttons to
adjust the volume.
Selecting files for playback (skipping)
When the Home Screen is open, use the . and /
buttons to select the file that you want to play.
Press the . button when located at the beginning of a file
to skip to the beginning of the previous file.
When the Home Screen is open during playback, press the
/ button to skip to the next file.
Quick Operations
QUICK button overview
The QUICK button provides convenient access to functions
according to the situation.
Screen State Action
Home
Screen
Stop
Pause
Show delete, divide and level
alignment functions
Playing back Show level alignment functions
Recording
standby Show the level control function
Recording Creates a new file and continue
recording (track increment)
Playback Control Opens menu with just the level
alignment function
BROWSE , PLAYLIST Opens pop-up menu for working
with selected file (or folder)
TUNER Switches between CALIB and
INPUT LEVEL items
MENU screen,
OTHERS submenu,
other settings screens
Connecting with a Computer
You can transfer audio files on the microSD card in the unit to
a computer, as well as transfer audio files from the computer to
the unit.
Connecting with a computer using USB
1. Use the included USB cable to connect the unit to a
computer. If the power is off, turn it on.
2. On the USB SELECT screen, select STORAGE, and press
the 7 button to connect this unit to the computer. “USB
connected” will appear on the display.
3. This unit appears on the computer screen as an external
volume named “DR-05.
Exchanging files with a computer
Click the “DR-05 drive on the computer screen to show the
MUSIC and “UTILITY folders.
To transfer files to the computer, open the MUSIC folder and
drag and drop the desired files to destinations of your choice.
To transfer files from the computer, drag and drop the audio
files on the computer that you want to the MUSIC folder.
Disconnecting from a computer
Before disconnecting the USB cable, use the proper procedures
for the computer to unmount this unit.
The power turns off after the unit completes its shutdown
process.
See the computers operation manual for instructions about
how to unmount an external volume.
Settings and Information
Turning the built-in speaker off
Open MENU w SPEAKER w SPEAKER and set it to OFF.
System Settings
Use the SYSTEM menu to make various settings to use the unit
as you like. You can also initialize settings and format microSD
cards, for example.
1. Select MENU w OTHERS w SYSTEM and press the 7
button.
2. Make the necessary settings using the various functions.
TASCAM DR-05 13
Quick reference for using various functions
iButton names are shown like this: MENU.
iInstructions are abbreviated. For example, On the Home Screen, press the MENU button. select the REC SETTING menu, and then select the PRE REC item becomes: Home Screen w MENU w
REC SETTING w PRE REC.
iNot all steps are given for complex operations. For detailed operation procedures, see the Reference Manual.
Category Desired action Function name Procedures, buttons used and explanation
Basic functions
Return to the Home Screen HOME
Return to the Home Screen if you become unsure about how to proceed.
Record Home Screen w RECORD w RECORD
Recording will start using the current settings.
Play back a recording Home Screen w PLAY
Play the file shown (selected).
Adjust the playback volume Home Screen w + /
Adjust the volume of headphones, speakers, etc.
Select a file for playback Home Screen w . and /
If there a many files, using the browse function might be more convenient.
Recording
Change the file format Home Screen w MENU w REC SETTING w FORMAT
Set the file format used for recordings, including whether they are uncompressed (WAV) or compressed (MP3).
Use the low-cut filter Low cut filter Home Screen w MENU w REC SETTING w LOW CUT
This function removes noise and other sounds at low frequencies. Set the cutoff frequency.
Adjust the input level
manually
Home Screen w RECORD w . and /
Watch the meters and set the recording level so that they do not peak.
Adjust the input level
automatically
Peak reduction Home Screen w RECORD w QUICK w PEAK REDUCTION
This function automatically lowers the level when the recording level would overload.
Adjust the input level
automatically
Auto level Home Screen w RECORD w QUICK w AUTO LEVEL
This function automatically adjusts the level in response to the loudness of the input signal.
Adjust the input level
automatically
Limiter Home Screen w RECORD w QUICK w LIMITER
This function compresses only loud sounds to prevent overloads and does not change the recording level.
Record input sound over
playback sound
Overdubbing Home Screen w MENU w OTHERS w MONITOR MIX
This function records a mix of the audio file playing back with the input signal as a new file.
14 TASCAM DR-05
Category Desired action Function name Procedures, buttons used and explanation
Other recording
features
Add a mark during recording Mark Recording Screen w MARK
This function adds a mark to the file that can be used as an index during playback.
Create a new file manually
while recording
Manual track incremen-
tation
Recording Screen w QUICK
Use this function if you want to create a new file without interrupting recording when, for example, the song changes.
Set automatic file division Automatic track incremen-
tation
Home Screen w MENU w REC SETTING w SIZE
This function can be used to automatically create a new file when the set size is reached.
Start recording a moment
before pressing RECORD
Pre-recording Home Screen w MENU w REC SETTING w PRE REC
When the unit is in recording standby, this function allows the unit to record a few seconds before the record button is
pressed.
Use the self-timer to record Self-timer Home Screen w RECORD w PB CONT
This self-timer function is convenient when you want to record your own performance.
Automatically start recording
when sound is input
Auto recording Home Screen w MENU w REC SETTING w AUTO REC w MODE
This function can automatically start and pause recording, create new files and add marks in response to the input sound
level.
Other playback
features
Enable repeat playback Repeat playback Home Screen w MENU w PLAY SETTING w REPEAT
This function allows you to repeat playback of a specific file.
Repeat playback between two
points in a file
Loop playback Playback Control screen w PB CONT w MARK
This function allows you to repeat playback of a specific interval in a single file.
Change playback speed VSA Playback Control screen w PB CONT w + /
This function allows you to change the speed of playback.
Use the playback equalizer Playback equalizer Home Screen w MENU w PLAY SETTING w PLAYEQ
This function allows you to increase or decrease the levels of the high or low frequencies during playback to improve the
sound quality.
Go back a few seconds during
playback and play that part
again
Jump-back playback During playback w PLAY
When used during playback, this function allows you to go back and play the preceding few seconds again.
Change the jump-back
playback settings
(Jump-back playback) Home Screen w MENU w PLAY SETTING w JUMPBACK
You can set how many seconds to go back when using the jump-back playback function.
Even out the volume during
playback
Level alignment Home Screen w QUICK w LEVEL ALIGN
This function makes recordings sound more even by adjusting the playback volume according to volume during playback.
Select a playback area Home Screen w MENU w PLAY SETTING w AREA
You can select a folder or playlist as the play area from which files can be chosen.
Other features
Listen to playback and input
sounds at the same time
Monitor mix Home Screen w MENU w OTHERS w MONITOR MIX
This function allows you to listen to both the input and playback sounds at the same time.
Tune an instrument Chromatic tuner Home Screen w MENU w OTHERS w TUNER
You can use this unit to help tune a guitar or other instrument.
Add reverb to a sound Effect Home Screen w MENU w OTHERS w EFFECT
This function adds reverb to the input signal or playback sound.
TASCAM DR-05 15
Category Desired action Function name Procedures, buttons used and explanation
File
operations
Check file information Home Screen w MENU w BROWSE w + / w QUICK w INFO
Use this function to check the date of recording and file size, for example.
Add a file to the playlist Home Screen w MENU w BROWSE w + / w QUICK w ADD LIST
You can make a playlist that includes specific files.
Delete a file Home Screen w MENU w BROWSE w + / w QUICK w DELETE
You can delete files that you do not need.
Delete a file Home Screen w QUICK w DELETE
You can delete files that you do not need.
Delete all files in a folder at the
same time
Home Screen w MENU w BROWSE w + / w QUICK w ALL DEL
You can delete all the files in a folder at the same time.
Divide a file Divide Home Screen w QUICK w DIVIDE
Use this function to divide one file into two files.
Unit settings
Set the language shown Home Screen w MENU w OTHERS w SYSTEM w LANGUAGE
Use this to set the language shown on the display.
Set the date and time Home Screen w MENU w OTHERS w DATE/TIME
Use this function to set the internal clock, which is used for the recording dates written to files, for example.
Turn the speaker off Home Screen w MENU w SPEAKER w OFF
Do this to stop sound output from the speaker in the back of the unit.
Turn plug-in power on Home Screen w MENU w REC SETTING w MIC POWER
Make this setting when using an external mic that requires plug-in power.
Check information about the
unit and the card.
Home Screen w MENU w OTHERS w INFORMATION
Use this function to check the unit firmware version and the amount of remaining space on the card, for example.
Change the power saving
function setting
Automatic power saving Home Screen w MENU w OTHERS w SYSTEM w AUTO PWR SAVE
This function automatically turns the unit off when it is not used for some time.
Change the backlight setting Home Screen w MENU w OTHERS w SYSTEM w BACKLIGHT
Use this to change the display backlight setting.
Adjust the display contrast Home Screen w MENU w OTHERS w SYSTEM w CONTRAST
Use this to set the contrast of the characters on the display.
Set the battery type Home Screen w MENU w OTHERS w SYSTEM w BATTERY TYPE
Select the type of battery being used. This setting affects the accuracy of the remaining battery display.
Restore the unit to its default
settings
Initialize Home Screen w MENU w OTHERS w SYSTEM w INITIALIZE
Use this function to restore all settings to their factory defaults.
Quickly format an microSD
card
Quick format Home Screen w MENU w OTHERS w SYSTEM w QUICK FORMAT
Use this function to format cards. You should usually use the quick format function to format a card.
Completely format an
microSD card
Full format Home Screen w MENU w OTHERS w SYSTEM w FULL FORMAT
Use this only when you want to completely erase the data on a card.
Set the file name format Home Screen w MENU w OTHERS w FILE NAME
You can change the characters used in the file names that are automatically assigned.
16 TASCAM DR-05
Message
The following is a list of the pop-up messages that might appear on the DR-05 under certain
conditions.
Refer to this list if one of these pop-up messages appears and you want to check the meaning or
determine a proper response.
Message Meaning and response
File Name Err
The DIVIDE function would cause the file name to exceed 200
characters. The DIVIDE function adds "_a” or “_b” to the end of the file
name. Before choosing the DIVIDE function, connect the unit to a
computer and edit the file name to less than 198 characters.
Dup File Name
The DIVIDE function would cause the file name to be the same as that
of an existing file in the same folder. The DIVIDE function adds "_a or
“_b to the end of the file name. Before choosing the DIVIDE function,
connect the unit to a computer and edit the file name.
File Not Found The file added to the playlist cannot be found or a file could be
damaged. Please check that file.
Non-Supported
The audio file is not a supported format. Please see "10 – Connecting
with a Computer" in the Reference Manual for file formats that this unit
can use.
Battery Empty The batteries are almost out of power. Replace the batteries.
I/O Too Short The IN and OUT points are too close together. Set them with at least 1
second between them.
File Not Found
PLAYLIST
A file in the Playlist cannot be found. Please confirm that the file is still
in the Music folder.
No PLAYLIST No files have been added to the Playlist. Add a file to the Playlist or
change the play mode to something besides PLAYLIST.
PLAYLIST FILL The playlist is full. You cannot add more than 99 tracks to the Playlist.
MBR ERROR
Init CARD
The card is not formatted properly or the formatting is broken. Change
the card or press the 7 button while this message is being shown to
format the card.
Formatting will erase all the data on the card.
Format Error
Format Card
The card is not formatted properly or the card might be broken. This
message also appears if the card was formatted using a computer
connected by USB and if an unformatted card is inserted in the unit.
Always use the DR-05 to format cards to be used with it. Change the
card or press the 7 button while this message is being shown to
format the card.
Formatting will erase all the data on the card.
File Not Found
Make Sys File
The system file is missing. This unit requires a system file for operation.
When this message appears, press the 7 button to automatically
create a system file.
Message Meaning and response
Invalid SysFile
Make Sys File
The system file required to operate this unit is invalid. When this
message appears, press the 7 button to automatically create a new
system file.
Invalid Card
Change Card Something might be wrong with the card. Change the card.
Write Timeout Writing to the card timed out.
Backup files on the card to a computer, and format the card.
Card Full The card has no remaining capacity. Erase unnecessary files or move
them to a computer to make open space.
Can't Divide The selected division point is not suitable. (It is too close to the
beginning or end of the track.)
Max File Size
The file is larger than the designated size, or the recording time has
exceeded 24 hours when the total number of folders and files was
already at the limit (5000).
File Full The total number of folders and files exceeds 5000. Erase unnecessary
folders and files or move them to a computer.
Card Error The card could not be recognized properly. Change the card.
File Protected The file is read only and cannot be erased.
No Card No card is in the unit, so recording is not possible.
No MUSIC File There is no playback file, so DIVIDE cannot be executed.
If any other error occurs, turn the unit off and restart it.
TASCAM DR-05 17
Troubleshooting
If you are having trouble with the operation of this unit, please
try the following before seeking repair. If these measures do
not solve the problem, please contact the store where you
bought the unit or TEAC customer support.
8The unit will not turn on.
Confirm that the batteries are not dead.
iConfirm that the batteries are installed with the correct
¥/^ orientation.
iConfirm that the AC adapter (TASCAM PS-P520E, sold
separately) is securely connected to both the outlet and the
unit.
iWhen using USB bus power, confirm that the USB cable is
securely connected.
iWhen using USB bus power, confirm that it is not connected
via a USB hub.
iConfirm that the HOLD switch is not set in the direction of
the arrow.
8The unit turns off automatically.
Is the automatic power saving function on? See "Setting the
automatic power saving function" in "11 − Settings and Infor-
mation" of the Reference Manual.
iSince this unit complies with the European Standby Power
Regulations (ErP), the automatic power saving function
operates regardless of whether the unit is being powered
by an AC adapter or batteries. If you do not want to use
the automatic power saving function, set it to "OFF". (The
factory default setting is "30min".)
8The unit does not function.
iConfirm that the HOLD switch is not set in the direction of
the arrow.
iIs the unit connected to a computer by a USB cable? (Does
"USB connected" appear on the display?)
8The microSD card is not recognized.
iConfirm that the microSD card is inserted completely.
8Playback is not possible.
iIf you are trying to play a WAV file, confirm that the sampling
frequency is supported by this unit.
iIf you are trying to play an MP3 file, confirm that the bit rate
is supported by this unit.
8No sound is output from the speaker.
iAre headphones connected?
iIs SPEAKER set to OFF?
iCheck the connections with the monitoring system.
iIs the volume of the monitoring system minimized?
iIs the OUTPUT LEVEL setting of the unit minimized?
8Recording is not possible.
iIf you are using an external device, check the connection
again.
iCheck the input settings again.
iConfirm that the recording level is not too low.
iConfirm that the microSD card is not full.
iConfirm that the number of files has not reached the
maximum that the unit can handle.
8The recording level is low.
iConfirm that the input level setting is not too low.
iConfirm that the output level of any connected device is
not too low.
8The sound I am trying to record sounds
distorted.
iConfirm that the input level setting is not too high.
iConfirm that an effect is not being used.
8The playback sounds unnatural.
iConfirm that the playback speed has not been changed.
iConfirm that the playback equalizer is not enabled.
iConfirm that the level alignment function is not enabled.
iConfirm that an effect is not being used.
8I cannot erase a file.
iConfirm that you are not trying to erase a file that has been
copied from a computer after being write-protected.
8This unit’s files do not appear on the
computer.
iConfirm that the unit is connected to the computer using
its USB port.
iConfirm that no USB hub is being used.
iConfirm that the unit is not recording or in recording
standby mode.
8The wrong language was set accidentally.
iAfter pressing the ¤(HOME) [8] button to turn the unit
off, press the ¤(HOME) [8] button while pressing and
holding the MENU button.
The language selection menu will appear, and you will be
able to select the language.
18 TASCAM DR-05
Specifications
Ratings
8Recording media
microSD card (64 MB−2 GB)
microSDHC card (4 GB−32 GB)
8Recording/playback formats
WAV: 44.1/48/96kHz, 16/24 bit
MP3: 44.1/48 kHz, 32/64/96/128/192/256/320 kbps
8Number of channels
2 channels (stereo)
Inputs and outputs
8MIC/EXT IN jack (can provide plug-in
power)
Connector: 1/8” (3.5mm) stereo mini jack
8/LINE OUT jack
Connector: 1/8” (3.5mm) stereo mini jack
8Built-in speaker
0.3W (mono)
8Control input/output ratings
8USB port
Connector: Mini-B type
Format:
USB 2.0 HIGH SPEED mass storage class
Audio performance
8Frequency response
20-20 kHz +1/−3 dB
(EXT IN to LINE OUT, 44.1kHz sampling frequency, JEITA*)
20-22 kHz +1/−3 dB
(EXT IN to LINE OUT, 48kHz sampling frequency, JEITA*)
20-40 kHz +1/−3 dB
(EXT IN to LINE OUT, 96kHz sampling frequency, JEITA*)
8Distortion
0.05% or less
(EXT IN to LINE OUT, 44.1/48/96kHz sampling frequency, JEITA*)
8S/N ratio
92 dB or higher
(EXT IN to LINE OUT, 44.1/48/96kHz sampling frequency, JEITA*)
* based on JEITA CP-2150
Recording times
File format (recording setting) Capacity
4 GB
WAV 16-bit (STEREO) 44.1kHz 6:44:00
WAV 24-bit (STEREO) 96kHz 2:04:00
MP3 (STEREO/MONO)
320kbps
44.1kHz
48kHz 29:48:00
iThe recording times shown above are estimates. They might
differ depending on the microSD/microSDHC card in use.
iThe recording times shown above are not continuous
recording times, but rather they are the total possible
recording times for the microSD/microSDHC card.
General
8Power
2 AA batteries (alkaline or NiMH)
USB bus power from a computer
AC adapter (TASCAM PS-P520E, sold separately)
8Power consumption
1.7 W (maximum)
8Battery operation time (continuous operation)
iUsing alkaline batteries (EVOLTA)
Format Operation
time Note
Recording WAV, 44.1kHz,
16-bit
About 17.5
hours
Recording with
built-in mic
Playback WAV, 44.1kHz,
16-bit
About 19.5
hours
Using built-in
speaker
Recording: JEITA recording time
Playback: JEITA music playback time
iUsing NiMH battery (eneloop)
Format Operation
time Note
Recording WAV, 44.1kHz,
16-bit
About 15.5
hours
Recording with
built-in mic
Playback WAV, 44.1kHz,
16-bit
About 16.5
hours
Using built-in
speaker
Recording: JEITA recording time
Playback: JEITA music playback time
NOTE
The battery operation times (during continuous
operation) could vary depending on the media being
used.
8Dimensions (W × H × D)
61 × 141 × 26 mm
8Weight
116 g (not including batteries)
8Operating temperature range
0°C–40°C (32°F–104°F)
iIllustrations in this manual might differ in part from the
actual product.
iSpecifications and external appearance might be changed
without notification to improve the product.
iDetailed specifications are provided in the Reference
Manual.
TASCAM DR-05 19
Mode d'emploi
PRÉCAUTIONS DE SÉCURITÉ
IMPORTANTES
Pour le Canada
THIS CLASS B DIGITAL APPARATUS COMPLIES WITH
CANADIAN ICES-003.
CET APPAREIL NUMÉRIQUE DE LA CLASSE B EST CONFORME
À LA NORME NMB-003 DU CANADA.
Ce produit est conforme aux directives
européennes et aux autres réglementa-
tions de la Commission européenne.
INSTRUCTIONS DE SÉCURITÉ
IMPORTANTES
1 Lisez ces instructions.
2 Conservez ces instructions.
3 Tenez compte de tous les avertissements.
4 Suivez toutes les instructions.
5 N'utilisez pas cet appareil avec de l'eau à proximité.
6 Ne nettoyez l'appareil qu'avec un chiffon sec.
7 Ne bloquez aucune ouverture de ventilation. Installez-le
conformément aux instructions du fabricant.
8 Ne l'installez pas près de sources de chaleur telles que
des radiateurs, bouches de chauffage, poêles ou autres
appareils (y compris des amplificateurs) dégageant de la
chaleur.
9 Ne neutralisez pas la fonction de sécurité de la fiche
polarisée ou de terre. Une fiche polarisée a deux broches,
l'une plus large que l'autre. Une fiche de terre a deux
broches identiques et une troisième broche pour la mise
à la terre. La broche plus large ou la troisième broche
servent à votre sécurité. Si la fiche fournie n'entre pas dans
votre prise, consultez un électricien pour le remplacement
de la prise obsolète.
10 Évitez de marcher sur le cordon d'alimentation et de
le pincer, en particulier au niveau des fiches, des prises
secteur, et du point de sortie de l'appareil.
11 N'utilisez que des fixations/accessoires spécifiés par le
fabricant.
12 Utilisez-le uniquement avec des
chariots, socles, trépieds, supports
ou tables spécifiés par le fabricant
ou vendus avec l'appareil. Si un
chariot est utilisé, faites attention
à ne pas être blessé par un
renversement lors du
déplacement de l'ensemble chariot/appareil.
13 Débranchez cet appareil en cas d'orage ou de non
utilisation prolongée.
14 Confiez toute réparation à des techniciens de
maintenance qualifiés. Une réparation est nécessaire si
l'appareil a été endommagé d'une quelconque façon,
par exemple si le cordon ou la fiche d'alimentation est
endommagé, si du liquide a été renversé sur l'appareil
ou si des objets sont tombés dedans, si l'appareil a été
exposé à la pluie ou à l'humidité, s'il ne fonctionne pas
normalement, ou s'il est tombé.
iL’appareil tire un courant nominal de veille de la prise
secteur quand son interrupteur POWER ou STANDBY/ON
nest pas en position ON.
iLa fiche secteur est utilisée comme dispositif de
déconnexion et doit donc toujours rester disponible.
iDes précautions doivent être prises en cas d'utilisation
d'écouteurs ou d'un casque avec le produit car une pression
sonore excessive (volume trop fort) dans les écouteurs ou
dans le casque peut causer une perte auditive.
iSi vous rencontrez des problèmes avec ce produit,
contactez TEAC pour une assistance technique. N'utilisez
pas le produit tant qu'il n'a pas été réparé.
ATTENTION
iN'exposez pas cet appareil aux gouttes ni aux éclaboussures.
iNe placez pas d'objet rempli de liquide sur l'appareil,
comme par exemple un vase.
iN’installez pas cet appareil dans un espace confiné comme
une bibliothèque ou un meuble similaire.
iL’appareil doit être placé suffisamment près de la prise de
courant pour que vous puissiez à tout moment attraper
facilement la fiche du cordon d'alimentation.
iSi le produit utilise des piles/batteries (y compris un pack de
batteries ou des piles installées), elles ne doivent pas être
exposées au soleil, au feu ou à une chaleur excessive.
iPRÉCAUTION pour les produits qui utilisent des batteries
remplaçables au lithium: remplacer une batterie par
un modèle incorrect entraîne un risque d'explosion.
Remplacez-les uniquement par un type identique ou
équivalent.
PRÉCAUTIONS CONCERNANT LES PILES
Ce produit utilise des piles. Le mauvais usage des piles peut
provoquer une fuite, une rupture ou d'autres problèmes.
Respectez toujours les précautions suivantes pour l'emploi de
piles.
iNe rechargez jamais des piles non rechargeables. Les piles
peuvent se rompre ou fuir, risquant de causer un incendie
ou des blessures.
iLors de l’installation des piles, faites attention aux indications
de polarité (orientation plus/moins (¥/^) et installez-les
correctement dans le compartiment des piles comme
indiqué. Les installer à l’envers peut entraîner la rupture ou
la fuite des piles, source d’incendie, de blessure ou de dégât
autour d’elles.
iQuand vous rangez ou jetez des piles, isolez leurs bornes
avec de l'adhésif isolant ou avec un matériau équivalent
pour leur éviter d'entrer en contact avec d'autres piles ou
des objets métalliques.
iLorsque vous jetez les piles usagées, suivez les instructions
de mise au rebut indiquées sur les piles et les lois locales sur
l’enlèvement des ordures.
iN'utilisez pas d'autres piles que celles spécifiées. N'utilisez
pas en même temps des piles neuves et usagées, ni des
types de piles différents. Les piles peuvent se rompre ou fuir,
risquant de causer un incendie, des blessures ou des dégâts
autour d’elles.
iNe transportez pas et ne conservez pas des piles en même
temps que de petits objets métalliques. Les piles peut
entrer en court-circuit, provoquant une fuite, une rupture
ou d'autres problèmes.
iNe chauffez et ne démontez pas les piles. Ne les jetez pas
dans un feu ou dans de l’eau. Les piles peuvent se rompre
20 TASCAM DR-05
ou fuir, risquant de causer un incendie, des blessures ou des
dégâts autour d’elles.
iSi le liquide de la pile s’échappe, essuyez tout liquide
répandu dans le boîtier des piles avant d’insérer de nouvelles
piles. Si le liquide d’une pile touche un œil, il peut entraîner
une perte de la vue. Dans ce cas, rincez abondamment à
l’eau claire sans frotter l’œil et consultez immédiatement
un médecin. Si le liquide touche le corps ou les vêtements
d’une personne, il peut entraîner des blessures ou brûlures
cutanées. Si cela se produit, rincez abondamment à l’eau
claire puis consultez immédiatement un médecin.
iL’alimentation de l’unité doit être coupée quand vous
installez ou remplacez des piles.
iRetirez les piles si vous envisagez de ne pas utiliser l’unité
durant une période prolongée. Les piles peuvent se rompre
ou fuir, risquant de causer un incendie, des blessures ou
des dégâts autour d’elles. Si le liquide de la pile s’échappe,
essuyez tout liquide répandu dans le boîtier des piles avant
d’insérer de nouvelles piles.
iNe démontez pas une pile. L'acide qu'elle contient peut
entraîner des blessures cutanées ou des dommages aux
vêtements.
8Pour les consommateurs européens
Mise au rebut des équipements électriques
et électroniques
(a) Tout équipement électrique et électronique doit être
traité séparément de la collecte municipale d'ordures
ménagères dans des points de collecte désignés par le
gouvernement ou les autorités locales.
(b) En vous débarrassant correctement des équipements
électriques et électroniques, vous contribuerez à la
sauvegarde de précieuses ressources et à la prévention
de potentiels effets négatifs sur la santé humaine et
l'environnement.
(c) Le traitement incorrect des déchets d'équipements
électriques et électroniques peut avoir des effets graves
sur l'environnement et la santé humaine en raison
de la présence de substances dangereuses dans les
équipements.
(d) Le symbole de poubelle sur roues barrée
d'une croix indique que les équipements
électriques et électroniques doivent être
collectés et traités séparément des déchets
ménagers.
(e) Des systèmes de retour et de collecte sont
disponibles pour l'utilisateur final. Pour des informations
plus détaillées sur la mise au rebut des vieux équipements
électriques et électroniques, veuillez contacter votre
mairie, le service d'ordures ménagères ou le magasin dans
lequel vous avez acheté l'équipement.
Mise au rebut des piles et/ou accumulateurs
(a) Les piles et/ou accumulateurs hors d'usage doivent être
traités séparément de la collecte municipale d'ordures
ménagères dans des points de collecte désignés par le
gouvernement ou les autorités locales.
(b) En vous débarrassant correctement des piles et/ou
accumulateurs hors d'usage, vous contribuerez à la
sauvegarde de précieuses ressources et à la prévention
de potentiels effets négatifs sur la santé humaine et
l'environnement.
(c) Le traitement incorrect des piles et/ou accumulateurs
hors d'usage peut avoir des effets graves sur
l'environnement et la santé humaine en raison de la
présence de substances dangereuses.
(d) Le symbole de poubelle sur roues barrée
d'une croix indique que les piles et/ou
accumulateurs doivent être collectés et traités
séparément des déchets ménagers.
Si la pile ou l'accumulateur contient plus que
les valeurs spécifiées de plomb (Pb), mercure
(Hg) et/ou cadmium (Cd) telles que définies dans la
directive sur les piles (2006/66/CE), alors les symboles
chimiques de ces éléments seront indiqués sous le
symbole de poubelle sur roues barrée d'une croix.
(e) Des systèmes de retour et de collecte sont disponibles
pour l'utilisateur final. Pour des informations plus
détaillées sur la mise au rebut des piles et/ou
accumulateurs, veuillez contacter votre mairie, le service
d'ordures ménagères ou le magasin dans lequel vous les
avez achetés.
Pb, Hg, Cd
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104

Tascam DR-05 Le manuel du propriétaire

Taper
Le manuel du propriétaire