Samsung VCA-SAE903 Manuel utilisateur

Vacuum cleaner

User manual

VS20R90**** Series / VS15R85**** Series

• Before operating this unit, please read the instructions carefully.

• For indoor use only

VS9000+VCA-SAE90_AA_00821U-00.indb 1 2020-12-02 오후 4:45:04

Contents

PREPARATION

Safety information 3

INSTALLATION

Name of the parts 15

Accessories 16

Installing the charging stand 17

Installation guide 17

OPERATION

Using the vacuum cleaner 18

Using the charging stand 18

Charging the battery 19

Operating the vacuum cleaner 20

Using the accessories 21

MAINTENANCE

Maintaining the vacuum cleaner 24

When to empty the dustbin 24

Emptying the dustbin easily 24

Emptying and cleaning the dustbin 24

Cleaning the lter 26

Cleaning the accessories 27

APPENDIX

Notes and cautions 29

Battery usage 29

Operation 30

Maintenance 32

Troubleshooting 33

Product Specication

Model VS20R90**** VS15R85****

Power 100-240 V

~

50-60Hz

Rated power consumption

550W 410W

Battery specication

Lithium-ion 21.9 V, 2850 mAh,

6 cell

Lithium-ion 21.6 V, 1800 mAh,

6 cell

Charging time 3.5 hours

Cleaning

time

Handy

Approximately 6 minutes (MAX) /

Approximately 30 minutes (MID) /

Approximately 60 minutes (MIN)

Approximately 5 minutes (MAX) /

Approximately 20 minutes (MID) /

Approximately 40 minutes (MIN)

Soft Action

Brush

Approximately 9 minutes (MAX) /

Approximately 20 minutes (MID) /

Approximately 40 minutes (MIN)

Approximately 6 minutes (MAX) /

Approximately 20 minutes (MID) /

Approximately 30 minutes (MIN)

Turbo Action

Brush

Approximately 9 minutes (MAX) /

Approximately 20 minutes (MID) /

Approximately 35 minutes (MIN)

Approximately 5 minutes (MAX) /

Approximately 18 minutes (MID) /

Approximately 27 minutes (MIN)

 Charging and cleaning time may differ depending on the brushes and the conditions of use.

English

2

VS9000+VCA-SAE90_AA_00821U-00.indb 2 2020-12-02 오후 4:45:04

PREPARATION

Safety information

PREPARATION

• Before operating the appliance, please read this manual thoroughly and

retain it for your reference.

• Because the following operating instructions cover various models, the

characteristics of your vacuum cleaner may differ slightly from those

described in this manual.

Caution/Warning symbols used

WARNING

Indicates that a danger of death or serious injury exists.

CAUTION

Indicates that a risk of personal injury or material damage exists.

Other symbols used

NOTE

Indicates that the following text contains additional important information.

State of California Proposition 65 Warning (US only)

WARNING

This product contains chemicals known to the State of California to cause

cancer and birth defects or other reproductive harm.

L i - i o n

For battery recycling go to call2recycle.org

or call 1-800-822-8837

English

3

VS9000+VCA-SAE90_AA_00821U-00.indb 3 2020-12-02 오후 4:45:05

PREPARATION

Failure to meet these requirements could cause damage to the internal parts

of the vacuum and void your warranty.

General

• Read all instructions carefully. Before switching the vacuum on, make sure

that the voltage of your electricity supply is the same as that indicated on

the rating plate at the rear of the handy vacuum cleaner (battery contact

side).

• WARNING : Do not use the vacuum cleaner on a wet rug or oor.

• Close supervision is necessary when any appliance is used by or near

children. Do not allow the vacuum cleaner to be used as a toy. Do not

allow the vacuum cleaner to run unattended at any time. Use the vacuum

cleaner only for its intended purpose as described in these instructions.

• Do not use the vacuum cleaner without a dustbin.

• Empty the dustbin before it is full to maintain the highest efciency.

• Do not use the vacuum cleaner to pick up matches, live ashes or cigarette

butts. Keep the vacuum cleaner away from stoves and other heat sources.

Heat can deform and discolor the plastic parts of the unit.

• Avoid picking up hard, sharp objects with the vacuum cleaner as they may

damage the vacuum’s parts.

• Do not block the suction or the exhaust port.

• To avoid damage, remove the plug by grasping the plug, not by pulling

the cord.

English

4

VS9000+VCA-SAE90_AA_00821U-00.indb 4 2020-12-02 오후 4:45:05

PREPARATION

• This appliance is not intended for use by persons (including children) with

reduced physical, sensory or mental capabilities, or lack of experience

and knowledge, unless they have been given supervision or instruction

concerning use of the appliance by a person responsible for their safety.

Children should not clean or perform maintenance on the vacuum without

adult supervision.

• Children should be supervised to ensure that they do not play with the

appliance.

• The battery must be removed from the main unit before cleaning or

performing maintenance on the vacuum.

• The use of an extension cord is not recommended.

• If your vacuum cleaner is not operating correctly, switch off the power

supply and consult an authorized Samsung service agent.

• If the power cord is damaged, it must be replaced by a Samsung service

center to avoid any electrical hazards.

• Do not use to suction up water.

• Do not immerse in water for cleaning.

• Please contact Samsung or a Samsung service center for a replacement if

one is needed.

English

5

VS9000+VCA-SAE90_AA_00821U-00.indb 5 2020-12-02 오후 4:45:05

PREPARATION

Charging stand

• Do not modify the polarized plug to t a non-polarized outlet or extension

cord.

• Do not use outdoors or on wet surfaces.

• Unplug the charging stand from the outlet when not in use and before

servicing.

• Use only the charging stand supplied by the manufacturer to recharge.

• Do not use with a damaged cord or plug.

• Do not pull or carry by the cord, use the cord as a handle, close a door on

the cord, or pull the cord around sharp edges or corners. Keep the cord

away from heated surfaces.

• Do not use extension cords or outlets with inadequately rated current.

• Do not charge a non-rechargeable battery.

• Do not unplug by pulling on the cord. To unplug, grasp the plug, not the

cord.

• Do not mutilate or incinerate batteries as they will explode at high

temperatures.

• Do not attempt to open the charging stand. Repairs should be only carried

out by a qualied Samsung service center.

• Do not expose the charging stand to high temperatures or allow moisture

or humidity of any kind to come into contact with the charging stand.

English

6

VS9000+VCA-SAE90_AA_00821U-00.indb 6 2020-12-02 오후 4:45:05

PREPARATION

Vacuum cleaner

• Do not pick up hard or sharp objects such as glass, nails, screws, coins, etc.

• Do not use without a lter in place. When servicing the unit, never put

ngers or other objects into the fan chamber in case the unit accidentally

turns on.

• Do not put any objects into openings. Do not use with any openings

blocked. Keep openings free of dust, lint, hair, and anything that may

reduce air ow.

• Do not pick up toxic materials (chlorine bleach, ammonia, drain cleaner,

etc.).

• Do not pick up anything that is burning or smoking, such as cigarettes,

matches, or hot ashes.

• Do not use the vacuum cleaner in an enclosed space lled with vapours

given off by oil based paint, paint thinner, moth proong substances,

ammable dust, or other explosive or toxic vapours.

Installation

• If you have a problem with installing the charging stand, contact a

Samsung service center.

 Injury or product malfunction from not installing the charging stand

correctly may not be compensated.

English

7

VS9000+VCA-SAE90_AA_00821U-00.indb 7 2020-12-02 오후 4:45:05

PREPARATION

Power related

WARNING

• When installing the charging stand, do not bend the power cord with

excessive force or put heavy objects on the power cord.

– Otherwise, electric shock or re may occur.

• If there is dust, water, etc. on a pin or contact point of the power plug,

wipe them carefully.

– Otherwise, abnormal operation or electric shock may occur.

• Do not pull the cord and do not touch the plug with wet hands.

• Do not plug the charging stand into a power source with the incorrect

voltage. Do not plug the charging stand into a muti-outlet or power strip.

Do not leave the power cord lying on the oor. Attach the cord close to a

wall.

– Otherwise, electric shock or re may occur.

• Do not use a damaged power plug, power cord, or loose power outlet.

– Otherwise, electric shock or re may occur.

• If the power cord is damaged, have a Samsung authorized service center

replace the power cord with a new power cord.

– Otherwise, electric shock or re may occur.

Operation

WARNING

• Do not touch the charging terminal of a vacuum or charging stand with

chop sticks, metal screw drivers, forks, knives, etc.

– Otherwise, product malfunction or electric shock may occur.

• Make sure that the battery terminals of the charging stand do not come

into contact with a conductor such as a bracelet, watch, metal rod, nail, etc.

English

8

VS9000+VCA-SAE90_AA_00821U-00.indb 8 2020-12-02 오후 4:45:05

PREPARATION

• Make sure that any liquid such as water or juice is not allowed to enter

the vacuum cleaner or the charging stand.

– Otherwise, electric shock or re may occur.

• Do not use the charging stand for other purposes.

– Otherwise, severe damage to the charging stand or re may occur.

• Do not vacuum liquid, blades, pins, embers, etc. during cleaning.

– Otherwise, abnormal operation or product damage may occur.

• Do not step on the product body or strike the product.

– Otherwise, an injury or product damage may occur.

• The brush and air outlet should not be blocked during cleaning.

– Otherwise, product malfunction or re may occur due to overheating of

the product.

• This product is intended for household use only. Do not use this product

for heavy duty cleaning, commercial cleaning, industrial cleaning, or

cleaning outdoors, especially on stone or cement. Do not use to pick up

chalk powder in and around billiard tables or in hospital aseptic rooms.

– Otherwise, abnormal operation or product damage may occur.

• Do not use the product near heating appliances such as heaters, or in

areas containing combustible sprays, or ammable materials.

– Otherwise, re or product deformation may occur.

• Before using the product, make sure that the lters are correctly inserted.

– Otherwise, dust can enter the motor inside the main body and cause

product damage. Suction force can decrease.

• If there is a gas leak or combustible spray is used, do not touch the power

outlet and open the window for ventilation.

– Otherwise, an explosion or re may occur.

• If the vacuum makes a strange sound or emits a smell or smoke, turn off

the vacuum immediately, and then contact a Samsung service center.

– Otherwise, electric shock or re may occur.

English

9

VS9000+VCA-SAE90_AA_00821U-00.indb 9 2020-12-02 오후 4:45:06

PREPARATION

CAUTION

• Do not use the product near combustible material. Also do not use:

– In a place where a burning candle or desk lamp is placed on the oor.

– In an area where an unattended place heater is turned on or an area in

which there are unextinguished embers in a replace, in an ashtray, etc.

– In a place where there are combustible materials such as gasoline,

alcohol, thinner, ashtrays with unextinguished cigarettes, etc.

• Do not allow children to cling to or push the charging stand.

– Personal injury, product and oor damage may occur.

• When you need to store the vacuum cleaner for a short time during

cleaning, turn the vacuum off and lay it on the oor.

– Otherwise, the vacuum cleaner may fall and could cause an injury or

severe product damage.

• Do not charge the product near a window, heater, toilet, bathroom, etc.

• After using the vacuum cleaner, you should store it in the charging stand

or lay it safely on the oor.

– Otherwise, the product may fall and could cause an injury or severe

product damage.

• Do not store the vacuum cleaner by leaning it against a wall or table.

• Do not use the vacuum cleaner for other than its intended purpose. (Do

not allow children to ride on or play with the product.)

– An injury or product damage may occur.

• Before plugging in or unplugging the charging stand, turn off the vacuum

and make sure that the pins of the power plug do not come into contact

with your hands.

– Otherwise, re or electric shock may occur.

English

10

VS9000+VCA-SAE90_AA_00821U-00.indb 10 2020-12-02 오후 4:45:06

PREPARATION

• Do not step heavily on the upper part of the wet brush while using it.

– Otherwise, product damage or oor damage may occur.

• When using the vacuum cleaner, be careful not to hurt yourself on the

moving or spinning parts.

– Be careful not to suction body parts into a brush of the vacuum cleaner

(Hair, etc.).

• When cleaning the wall or ceiling, use both hands.

• Use both hands to clean with the vacuum. If you clean with one hand, you

can damage your wrist or drop the vacuum and cause an injury or damage

the vacuum.

• When assembling the vacuum, be careful not to catch your ngers or

hands in the movement fold of the handle.

• Do not use the vacuum cleaner on objects that can be easily scratched

(monitors, stainless steel appliances, etc.).

• Do not store the vacuum cleaner inside a car.

• Do not use water to clean the vacuum cleaner when in use.

• Use the vacuum cleaner in dry places only.

• Do not use the vacuum cleaner in wet places or on water.

• Do not use the vacuum cleaner to pick up spilled beverages or pet waste.

• Do not use the vacuum cleaner in direct sunlight or high heat.

English

11

VS9000+VCA-SAE90_AA_00821U-00.indb 11 2020-12-02 오후 4:45:06

PREPARATION

Maintenance

WARNING

• Before removing foreign matter inside the vacuum, turn off the vacuum

cleaner rst.

– If the vacuum is on while you are removing the foreign matter, you can

hurt yourself or damage the vacuum.

• When cleaning the exterior of the product, turn off the product rst

and then wipe it with a dry towel. Do not spray water directly onto the

product or wipe it with volatile materials such as benzene, thinner, or

alcohol.

– If water gets into the product and an error occurs, turn off the product

and contact a Samsung service center.

• Unplug the charging stand before cleaning it.

• When cleaning the washable parts, do not use alkaline detergent, acid,

industrial detergent, air freshener, acetic acid, etc.

– Otherwise, product damage such as plastic breakage, deformation,

discoloration, printing deterioration, etc. may occur.

Washable Parts

Dustbin, washable micro lter, ultra ne dust lter,

metal mesh grille lter, dry cloth

Acceptable

detergent

Neutral Dish washing detergent

Prohibited

detergent

Alkaline Lox, mold cleaner, etc.

Acid Parafn oil, an emulsier, etc.

Industrial

cleaners

NV-I, PB-I, Opti, alcohol, acetone, benzene, thinner, etc.

Air freshener Jet spray air fresheners (coffee avor, herb, etc.)

Oils Animal oils, vegetable oils

Etc. Edible acetic acid, vinegar, glacial acetic acid, etc.

CAUTION

• Do not push the vacuum cleaner while it is stored in the charging stand.

– Personal injury, oor and product damage may occur.

English

12

VS9000+VCA-SAE90_AA_00821U-00.indb 12 2020-12-02 오후 4:45:06

PREPARATION

REGULATORY NOTICE

1. FCC Notice

WARNING

• Any changes or modications not expressly approved by the party

responsible for compliance could void the user’s authority to operate the

equipment.

• This device complies with Part 15 of FCC Rules. Operation is Subject to

following two conditions:

1 This device may not cause harmful interference, and

2 This device must accept any interference received including interference

that cause undesired operation.

• For product available in the USA/Canada market, only channel 1~11 can

be operated. Selection of other channels is not possible.

FCC STATEMENT:

• This equipment has been tested and found to comply within the limits

for a Class B digital device, pursuant to part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful

interference in a residential installation.

• This equipment generates, uses, and can radiate radio frequency energy

and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is

no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on,

the user is encouraged to try to correct the interference by one or more of

the following measures:

– Reorient or relocate the receiving antenna

– Increase the separation between the equipment and receiver

– Connect the equipment into an outlet on a different circuit from that to

which the receiver is connected

– Consult the dealer or an experienced radio/TV technician for help.

English

13

VS9000+VCA-SAE90_AA_00821U-00.indb 13 2020-12-02 오후 4:45:06

PREPARATION

FCC RADIATION EXPOSURE STATEMENT:

• This equipment complies with FCC radiation exposure limits set forth for

an uncontrolled environment. This equipment should be installed and

operated with a minimum distance of 20cm between the radiator and your

body. This device and its antenna(s) must not be co-located or operation in

conjunction with any other antenna or transmitter.

2. IC Notice

• The term “IC” before the radio certication number only signies that

Industry Canada technical specications were met. Operation is subject to

the following two conditions: (1) this device may not cause interference,

and (2) this device must accept any interference, including interference

that may cause undesired operation of the device.

• This Class B digital apparatus complies with Canadian ICES-003.

• Cet appareil numérique de la classe B est conforme á la norme NMB-003

du Canada.

• For product available in the USA/Canada market, only channel 1~11 can

be operated. Selection of other channels is not possible.

IC RADIATION EXPOSURE STATEMENT:

• This equipment complies with IC RSS-102 radiation exposure limits set

forth for an uncontrolled environment. This equipment should be installed

and operated with minimum distance 20cm between the radiator & your

body. This device and its antenna(s) must not be co-located or operation in

conjunction with any other antenna or transmitter.

Open Source License Notice

• This device uses open source software. Open Source Licenses are available

on the product menu.

• Tap “Settings > Network > Software Update > Legal Information” on the

device for more details.

English

14

VS9000+VCA-SAE90_AA_00821U-00.indb 14 2020-12-02 오후 4:45:06

INSTALLATION

Name of the parts

INSTALLATION

01

Pipe (Adjustable)

02

Dustbin

03

Metal mesh grille lter

04

Washable micro lter

05

Ultra ne dust lter

06

Dustbin release button

07

Display

08

Power( ) button

09

Suction power control button

10

Handle

11

Battery level indicator

12

Battery release button

13

Pipe release button

14

Pipe length adjustment button

15

Brush release button

16

Vacuum charging part

17

Accessory holder

18

Additional battery charging slot

19

Power cord

16

19

18

10

12

14

15

01

02

05

06

07

08

09

13

11

04

03

 Battery Spec

VS20R90**** Series : Lithium-ion 21.9 V, 2850 mAh, 6 cell

VS15R85**** Series : Lithium-ion 21.6 V, 1800 mAh, 6 cell

 Those two batteries are not compatible with each other.

17

English

15

VS9000+VCA-SAE90_AA_00821U-00.indb 15 2020-12-02 오후 4:45:08

INSTALLATION

Accessories

Accessories may differ depending on the models.

Pipe (Adjustable) Battery User manual

Screws: 2EA /

Screw anchors: 2EA/

Fixing hook: 1EA

Combination Tool Extension Crevice

Tool

Charging stand /

Screw: 1EA / Power

cord

*Flexible Tool *Brush holder *Soft Action Brush *Turbo Action Brush

*Mini Motorized Tool *Wet Brush /

Multi-use wet pad

*Single-use wet pad /

Attachable pad

*Clean station

* Optional

English

16

VS9000+VCA-SAE90_AA_00821U-00.indb 16 2020-12-02 오후 4:45:13

INSTALLATION

Installing the charging stand

Installation guide

2

3

4

1

'Click'

Assembling the charging stand

1 Place the stand pipe on the bottom support,

and screw the pieces together using the

included small screw.

– Make sure the pieces are aligned

correctly and push it in rmly so that the

screw hole is aligned.

2 Insert the vacuum charging part at the top

of the stand pipe.

– Do not disassemble it after attaching it.

3 Connect the power cord to the rear of the

charging stand.

– Hold the connection part of the cord and

push it onto the connection pins rmly

until the gray lines on the tip of the cord

are not visible.

– To make it easier to place the stand

directly against a wall, insert the cord

into one of the grooves on the bottom of

the bottom support.

4 Plug in the charging stand.

2

3

4

1

26

inches

24

inches

Fixing by the hook

1 Using the xing hook as a template, mark

where the top and bottom screw holes will

be placed on the wall.

– Top: 26 inches from the oor

– Bottom: 24 inches from the oor

2 Drill the holes using a 1/4 inch. drill bit,

and put the provided screw anchors into

the hole.

3 Fix the xing hook to the wall with the

provided screws (large).

4 Hook the groove of the charging stand into

the xing hook.

 Please refer to the QR code for detailed information on the installation and

charging method of the charging stand.

English

17

VS9000+VCA-SAE90_AA_00821U-00.indb 17 2020-12-02 오후 4:45:15

OPERATION

Using the vacuum cleaner

Using the charging stand

Charging

 Make sure the back of the battery is

correctly placed onto the vacuum charging

part.

 Check if the battery level indicator is

displayed while charging.

 The battery level indicator blinks while

charging. When charging is complete, the

blinking stops and the light level dims.

1

2

Release button

Storing the accessories

 When accessories are disassembled to be

stored, dust may fall from the suction part

of the vacuum cleaner.

 After cleaning, shorten the pipe length and

operate in MAX mode for 10 seconds.

Storing the wet brush

When the brush holder is connected to the

charging stand, the wet brush can also be

stored at the charging stand.

 Do not connect the mini motorized tool to

the brush holder, or it may get damaged.

 Clean and dry the wet pad brush pads

before putting them away. When stored

near a wall, the pads may touch the wall

and get it dirty if they are not completely

clean and dry.

 When disconnecting the brush holder, press

the 2 release buttons on the holder.

English

18

VS9000+VCA-SAE90_AA_00821U-00.indb 18 2020-12-02 오후 4:45:18

OPERATION

Charging the battery

 When the battery level indicator is at its lowest level and blinks( ) charge the battery.

 When charging the vacuum, make sure the connection part of the charging stand is correctly

connected.

 The vacuum cleaner cannot be used while it is charging.

CAUTION

• Before ejecting the battery, the product must be turned off. (If the battery is forcibly ejected

while the vacuum is operating, the vacuum can malfunction.)

• Be careful not to drop the battery. If you do, you can injure yourself or damage the battery.

Ejecting the battery

Press the battery release button at the rear of

the handle to eject the battery.

‘Click’

Re-inserting the battery

Push the battery to the end until you hear it

click.

Charging the additional battery

• Charge the additional battery at the

additional battery charging slot at the

bottom of the charging stand.

• Push the battery in rmly.

• Check if the battery level indicator is

displayed while charging.

English

19

VS9000+VCA-SAE90_AA_00821U-00.indb 19 2020-12-02 오후 4:45:19

OPERATION

Operating the vacuum cleaner

If the brush clings to oors (such as a carpet, a mat, or bedding, etc.) or does not spin properly,

change the suction power to ‘MIN’ or ‘MID’ mode.

Power ( ) on / off

When pressing the power button, the vacuum

cleaner starts operation in ‘MID’ mode.

• When the wet brush is assembled,

operation starts in ‘WET’ mode.

Controlling suction power

You can control the suction power of the

vacuum cleaner.

• + button: Increases suction power.

• - button: Decreases suction power.

 The suction power control button does not

work in WET mode.

01

04

02

03

05

Checking the display

01

Clogged: Something is clogging the

dustbin, pipe, or the connected suction

accessory.

02

Spinning brush stuck: Something is

stuck in the connected spinning brush

accessory.

 The spinning brush stuck display will not

turn on if the spinning brush motor stops

because it has overheated.

03

No Filter: The washable micro lter is not

assembled correctly.

04

Suction power: Displays the current

suction power.

05

Wet brush cleaning mode: Displays when

the wet brush is assembled.

 If either 01, 02, or 03 blinks a few times

and the vacuum cleaner stops operation,

please take action by referring to the

maintenance part of this manual.

English

20

VS9000+VCA-SAE90_AA_00821U-00.indb 20 2020-12-02 오후 4:45:21

La page charge ...

Samsung VCA-SAE903 Manuel utilisateur

Samsung VCA-SAE903 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents