Samsung HL-61A750 Le manuel du propriétaire

DLP TV

user manual

BP68-00658B-01

Contact SAMSUNG WORLD-WIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.

Comment contacter Samsung dans le monde

Si vous avez des suggestions ou des questions concernant les produits Samsung, veuillez contacter le Service

Consommateurs Samsung.

Country

Customer Care Center 

Web Site Address

CANADA 1-800-SAMSUNG (7267864) www.samsung.com/ca

Samsung Electronics Canada Inc., Customer Service 55

Standish Court Mississauga, Ontario L5R 4B2 Canada

Samsung Electronique Canada Inc., Service à la Clientèle

55 Standish Court Mississauga, Ontario L5R 4B2

Canada

U.S.A 1-800-SAMSUNG (7267864) www.samsung.com

Samsung Electronics America, Inc. 105 Challenger Road

Ridgefield Park, NJ 07660-0511

Thank you for purchasing this Samsung product.

To receive more complete service, please

register your product at

www.samsung.com/global/register

Model Serial No.

imagine the possibilities

0658B_ENG-Cover-01.indd 1 2008-04-22 오후 5:34:19

English - 2

A Guide to Digital TV

● WhatisDigitalTelevision?

Digital television (DTV) is a new way of transmitting high quality video and audio to your TV set. Using DTV, broadcasters can

transmit high definition TV (HDTV) images, Dolby digital surround audio, and new services such as multicasting (transmitting

more than one program on the same TV channel) and datacasting. Several of these services can be combined into a single digital

broadcast.

Digital Television Services

● DigitalPictureQuality

DTV programs are transmitted in two different formats. The first is Standard Definition Television (SDTV) and the second is High

Definition Television (HDTV).

● SDTV program formats include 480-line interlaced (480i) and 480-line progressive (480p) video. 480i programs are essentially

a digital version of our current analog TV programs, while the 480p format offers improved image detail over 480i. Some 480p

programs are broadcast in widescreen and are comparable to progressive-scan DVD movies in image quality.

● HDTV program formats include 1080-line interlaced (1080i) and 720-line progressive (720p). Both HDTV formats are always

broadcast in widescreen, and offer much higher picture quality than SDTV.

The product unit accompanying this user manual is licensed under certain intellectual property rights of certain third parties. In

particular, this product is licensed under the following US patents:

5,991,715, 5,740,317, 4,972,484, 5,214,678, 5,323,396, 5,539,829, 5,606,618, 5,530,655, 5,777,992, 6,289,308, 5,610,985, 5,481,643,

5,544,247, 5,960,037, 6,023,490, 5,878,080, and under US Published Patent Application No. 2001-44713-A1.

This license is limited to private non-commercial use by end-user consumers for licensed contents. No rights are granted for

commercial use. The license does not cover any product unit other than this product unit and the license does not extend to any

unlicensed product unit or process conforming to ISO/IEC 11172-3 or ISO/IEC 13818-3 used or sold in combination with this

product unit. The license only covers the use of this product unit to encode and/or decode audio files conforming to the ISO/IEC 11172-

3 or ISO/IEC 13818-3. No rights are granted under this license for product features or functions that do not conform to the ISO/IEC

11172-3 or ISO/IEC 13818-3.

U.S.A Only

Other countries

The product unit accompanying this user manual is licensed under certain intellectual property rights of certain third parties. This license

is limited to private non-commercial use by end-user consumers for licensed contents. No rights are granted for commercial use. The

license does not cover any product unit other than this product unit and the license does not extend to any unlicensed product unit or

process conforming to ISO/IEC 11172-3 or ISO/IEC 13818-3 used or sold in combination with this product unit. The license only covers

the use of this product unit to encode and/or decode audio files conforming to the ISO/IEC 11172-3 or ISO/IEC 13818-3. No rights are

granted under this license for product features or functions that do not conform to the ISO/IEC 11172-3 or ISO/IEC 13818-3.

➢

See the warranty card for more information on warranty terms.

SAMSUNG ELECTRONICS NORTH AMERICAN LIMITED WARRANTY STATEMENT

Subject to the requirements, conditions, exclusions and limitations of the original Limited Warranty supplied with Samsung Electronics

(SAMSUNG) products, and the requirements, conditions, exclusions and limitations contained herein, SAMSUNG will additionally

provide Warranty Repair Service in the United States on SAMSUNG products purchased in Canada, and in Canada on SAMSUNG

products purchased in the United States, for the warranty period originally specified, and to the Original Purchaser only.

The above described warranty repairs must be performed by a SAMSUNG Authorized Service Center. Along with this Statement,

the Original Limited Warranty Statement and a dated Bill of Sale as Proof of Purchase must be presented to the Service Center.

Transportation to and from the Service Center is the responsibility of the purchaser.

Conditions covered are limited only to manufacturing defects in material or workmanship, and only those encountered in normal use

of the product.

Excluded, but not limited to, are any originally specified provisions for, in-home or on-site services, minimum or maximum repair times,

exchanges or replacements, accessories, options, upgrades, or consumables.

For the location of a SAMSUNG Authorized Service Center, please call toll-free:

In the United States : 1-800-SAMSUNG (1-800-726-7864) In Canada : 1-800-SAMSUNG

BP68-00658A_Eng.indb 2 2008-04-22 오후 7:37:27

English - 3

Q&A

1. IstheantennaIuseforexistingTVreceptiongoodenoughforDTV?

Over-the-air (OTA) digital TV broadcasting uses the same channels as analog TV and works well with many existing TV antennas.

However, DTV broadcast channel assignments are different than analog channels. You should find out whether your local DTV

broadcasts are on VHF (channels 2-13) or UHF (channels 14-69) to see if you need a different antenna.

If your DTV channels are on UHF and you already get good UHF reception, your present antenna may work fine. The same holds

true for VHF DTV reception. Note that in some markets, both VHF and UHF channels are used for DTV broadcasts.

You can find out the latest DTV channel assignments for your area by browsing selected Internet web sites such as www.titantv.

com, www.10000watts.com, and www.fcc.gov.

2. HowdifficultisittoreceiveDTVsignalsindoors?

This depends on whether your local DTV stations are running full power or not and how close your location is to the transmission

tower. DTV receivers do not require as much signal as analog TV receivers to produce high-quality images and sound.

Once the DTV signal level exceeds a certain threshold at the receiver, the digital video and audio data is decoded at the same

quality it was originally encoded for broadcast.

This is a big advantage for DTV over analog TV - there is no noise, ghosting, static, or scratchy audio.

3. How can I connect an antenna in my townhouse, co-operative apartment, condominium,

orapartment?

The Federal Communications Commission’s OTARD Rule (part of the Telecommunications Act of 1996) allows residents of

condominiums, townhouse, or members of neighborhood associations to put up outside antennas for reception of broadcast TV

signals as long as those antennas are not located in common areas and are no more than 12’ in height.

Residents of rental units (apartments, etc.) are not covered by the OTARD rules and will have to use indoor antennas to receive

DTV broadcasts. It is possible that the landlord of an apartment complex can provide broadcast DTV signals via a master TV

antenna system to each apartment.

4. CanIconnectmyDTVset-topreceivertomycableTVservice?

Cable TV systems use a different method for transmitting digital TV programs that is currently incompatible with broadcast DTV set-

top receivers. So you will still need to use an outdoor or indoor antenna to receive OTA broadcast DTV programs.

The good news is that you won’t have to pay a monthly or per-program charge to watch OTA DTV and HDTV programs. They’re

free, unlike subscription satellite TV or premium cable TV. All you need is an antenna and a DTV set-top receiver to enjoy clear,

sharp widescreen images and high-quality audio.

BP68-00658A_Eng.indb 3 2008-04-22 오후 7:37:28

English - 4

Contents

General Information

■



Viewing Position ...................................................................... 5

■



List of Features ....................................................................... 5

■



Checking Parts ........................................................................ 6

■



Viewing the Control Panel ....................................................... 6

■



Viewing the Connection Panel ................................................ 8

■



Remote Control ....................................................................... 9

■



Installing Batteries in the Remote Control ............................. 10

Connections

■



Connecting VHF and UHF Antennas .................................... 10

■



Connecting Cable TV .............................................................11

■



Connecting a DVD Player or Cable Box / Satellite receiver

(Set-Top Box) via HDMI ........................................................ 12

■



Connecting a DVD Player or Cable Box / Satellite receiver

(Set-Top Box) via DVI ........................................................... 12

■



Connecting a DVD Player or Cable Box / Satellite receiver

(Set-Top Box) via Componet cables ..................................... 13

■



Connecting a Camcorder ...................................................... 13

■



Connecting a VCR ................................................................ 14

■



Connecting a Digital Audio System ....................................... 15

■



Connecting an Amplier / DVD Home Theater ..................... 15

■



Connecting a PC ................................................................... 16

Operation

■



Turning the TV On and Off .................................................... 16

■



Plug & Play Feature .............................................................. 17

■



Changing Channels .............................................................. 19

■



Adjusting the Volume ............................................................ 20

■



Viewing the Display ............................................................... 20

■



Viewing the Menus ................................................................ 20

■



Using the TOOLS Button ...................................................... 21

■



Memorizing the Channels ..................................................... 21

■



To Select the Source ............................................................. 23

■



To Edit the Input Source Name ............................................. 23

PictureControl

■



Changing the Picture Standard ............................................. 24

■



Customizing the Picture Settings .......................................... 24

■



Adjusting the Detailed Settings ............................................. 25

■



Conguring Picture Options ................................................. 27

■



Using the 3D Function .......................................................... 32

■



Resetting the Picture Settings to the Factory Defaults ......... 33

■



Viewing Picture-in-Picture ..................................................... 34

Sound Control

■



Using Automatic Sound Settings ........................................... 36

■



Customizing the Sound ......................................................... 36

■



Setting the TruSurround XT .................................................. 37

■



Choosing Preferred Language .............................................. 38

■



Choosing a Multi-Channel Sound (MTS) Track - Analog ...... 38

■



Automatic Volume Control .................................................... 39

■



Setting the TV Speakers On/Off ............................................ 39

■



Listening to the Sound of the Sub (PIP) Picture ................... 40

■



Resetting the Sound Settings to the Factory Defaults .......... 40

Channel Control

■



Managing Channels .............................................................. 41

■



Clearing Scrambled Channels - Digital ................................. 47

■



Fine Tuning Analog Channels ............................................... 47

■



Checking the Digital-Signal Strength .................................... 48

PCDisplay

■



Using Your TV as a Computer (PC) Display ......................... 49

■



Display Modes ...................................................................... 49

■



Setting up the TV with your PC ............................................. 50

Time Setting

■



Setting the Time .................................................................... 52

Function Description

■



Selecting a Menu Language ................................................. 56

■



Using the V-Chip ................................................................... 57

■



Viewing Closed Captions (On-Screen Text Messages) - Digital .......

65

■



Viewing Closed Captions (On-Screen Text Messages) - Analog

..... 66

■



Adjusting the TV On/Off Melody Sound ................................ 67

■



Setting the Light Effect .......................................................... 67

■



Setting the Entertainment mode ........................................... 68

■



Upgrading the Software ........................................................ 69

WISELINK

■



Using the Photo List .............................................................. 72

■



Viewing a Photo or Slide Show ............................................. 77

■



Using the Music List .............................................................. 81

■



Playing a Music File .............................................................. 85

■



Using the Setup Menu .......................................................... 87

About Anynet+

■



What is Anynet

+

? .................................................................. 88

■



Connecting Anynet

+

Devices ................................................ 88

■



Setting Up Anynet

+ ............................................................... 89

■



Recording .............................................................................. 90

■



Listening through a Receiver (Home theater) ....................... 91

■



Troubleshooting for Anynet

+ ................................................. 91

Appendix

■



Troubleshooting .................................................................... 92

■



Cleaning and Maintaining Your TV ........................................ 93

■



Using Your TV in Another Country ........................................ 93

■



Technical Specications ........................................................ 94

Symbols

☛ ➢

Press

Important

Note

One-Touch

Button

English

BP68-00658A_Eng.indb 4 2008-04-22 오후 7:37:28

English - 5

General Information

ViewingPosition

To optimize your viewing comfort, please follow the guidelines below for viewing distance.

If viewing for an extended period of time, sit as far back from the screen as possible.

➢

When installing the product, make sure to keep it away from

the wall (more than 10cm / 4inches) for ventilation purposes.

Poor ventilation may cause an increase in the internal

temperature of the product, resulting in a shortened

component life and degraded performance.

< Top view> < Side view>

61˝ screen :

At least 7.2 feet

List of Features

Your TV is designed and engineered using the latest technology. It is a full-featured, high-performance unit that exceeds

industry standards. In addition, it has these special features:

● Easy-to-operate remote control

● Dynamic menus and Navigating menus by using the menu map

● Easy-to-use on-screen menu system you can access from the side panel or remote control

● Automatic timer to turn the TV on and off at any time you choose

● Adjustable picture and sound settings and the ability to memorize your favorite settings

● Automatic channel tuning for up to 181 channels

● A special filter to reduce or eliminate reception problems

● Fine tuning control for the sharpest picture possible

● A built-in multi-channel sound decoder for stereo and bilingual listening

● Built-in, dual channel speakers

● A special sleep timer

● Widescreen TV with adjustable image size

● Life-like clear images provided by DNle technology

● Detailed settings mode to correspond with your color preference

● HDMI/DVI connection of your PC to this TV

● Digital Input jack

● Digital Audio Output (OPTICAL) jack

● Easy-to-use channel list menu.

● WISELINK enables you to view and play photo (JPEG) and audio files (MP3) through the TV’s WISELINK jack.

● AV network system (Anynet+) that enables you to easily control Samsung audio-video(AV) devices from this TV.

● 3D Effect Gaming Functiont

67˝ screen :

At least 8.0 feet

61˝ screen :

At least 7.2 feet

67˝ screen :

At least 8.0 feet

BP68-00658A_Eng.indb 5 2008-04-22 오후 7:37:28

English - 6

ViewingtheControlPanel

ButtonsontheLower-RightPartofthePanel

The buttons on the lower-right panel control your TV’s basic features, including the on-screen menu.

To use the more advanced features, you must use the remote control.

CheckingParts

Owner’s Instructions Remote Control

(BN59-00673A)/

AAA Batteries

Warranty Card/

Safety Guide Manual/

Quick Guide Manual

(Not available in all locations)

Power Cord

(3903-000144)

Cloth-Clean

➢

The product color and shape may vary depending on the model.

Continued...

Sold Separately

S-Video Cable Video Cable Antenna Cable

Component Cables

Audio Cables

D-Sub Cable PC Audio Cable HDMI/DVI Cable HDMI Cable Optical Cable

3.5 mm Stereo

mini-plug/ 2RCA Cable

BP68-00658A_Eng.indb 6 2008-04-22 오후 7:37:31

English - 7

1

SOURCE

Toggles between all the available input sources

(TV, AV1, AV2, S-Video, Component1, Component2,

PC, HDMI1, HDMI2, HDMI3/DVI or USB).

2

MENU

Press to see an on-screen menu of your TV’s features.

3

+ VOL –

Press to increase or decrease the volume.

In the on-screen menu, use the + VOL – buttons as

you would use the ◄ and ► buttons on the remote

control.

4

CH

Press to change channels.

In the on-screen menu, use the CH buttons as

you would use the ▲ and ▼ buttons on the remote

control.

5

(ENTER)

Press to confirm a selection.

6

Indicator Lights

Blinks and turns off when the power is on and lights up

in stand-by mode.

7

POWER

Press to turn the TV on and off.

Remote Control Sensor

Aim the remote control towards this spot on the TV.

Indicator Light Key

( : On, : Blinking, : Off)

STANDBY/TEMP TIMER LED Indication

Standby state.

The picture will automatically appear in about 15 seconds.

Auto Timer ON/OFF has been set and the set will automatically be turned on in about 15 seconds.

A cooling fan inside the set is not operating normally.

LED may be defective. Please contact a certified technician.

➢

● It takes about 30 seconds for the TV to warm up, so normal brightness may not appear immediately.

● The TV has a fan to keep the inside LED from overheating. You’ll occasionally hear it working.

➢

● When using the on-screen menu the volume adjustment and channel selection buttons have the same function as the

▲/▼/◄/► buttons on the remote control.

● If the remote control no longer works or you have lost it, you can use controls on the panel of the TV.

BP68-00658A_Eng.indb 7 2008-04-22 오후 7:37:32

English - 8

ViewingtheConnectionPanel

SidePanelJacks

Use the side panel jacks to connect A/V components that will be connected continuously, such as VCR or DVD players.

For more information on connecting equipment, see pages 10~16.

➢

The product color and shape may vary depending on the model.

1

ANT IN

75Ω Coaxial connector for Air/Cable Network.

2

WISELINK

Connect an USB mass storage device to view photo files

(JPEG) and play audio files (MP3).

3

HDMI IN 1, HDMI IN 2

Connect to the HDMI jack of a device with HDMI output.

4

HDMI3/DVI IN

Connect to the HDMI jack of a device with HDMI output.

This input can also be used as a DVI connection with

separate analog audio inputs. An optional HDMI/DVI cable

will be necessary to make this connection.

When using an optional HDMI/DVI adapter, the DVI analog

audio inputs on your TV allow you to receive left and right

audio from your DVI device.

5

DVI IN (AUDIO-L/R)

Connect to the DVI audio output jack of an external device.

6

 DIGITALAUDIOOUT(OPTICAL)

Connect to a Digital Audio component.

7

RS232C

Connector for service only

8

S-VIDEO

Video input for external devices with an

S-Video output, such as a Camcorder or VCR.

9

VIDEO/AUDIO-L/R (AV IN 1, 2)

Video input for external devices, such as a Camcorder or

VCR.

0

AUDIO OUT-L/R

Audio outputs for external devices.

!

 COMPONENTIN1,2

Video (Y/PB/PR) and audio (L-AUDIO-R) component inputs.

@

 POWERIN

Connect the supplied power cord.

#

3D SYNC OUT

Connect to 3D IR Emitter.

$

 PCAUDIOIN

Connect to the audio output jack on your PC.

%

 PCIN

Connect to the video output jack on your PC.

BP68-00658A_Eng.indb 8 2008-04-22 오후 7:37:32

English - 9

Remote Control

You can use the remote control up to a distance of about 23 feet from the TV.

➢

The performance of the remote control may be affected by bright light.

1 POWER

Turns the TV on and off.

2 TV

Selects the TV mode directly.

3 NUMERIC BUTTONS

Press to change the channel.

4

Press to select additional channels

(digital and analog) being broadcast

by the same station. For example,

to select channel “54-3”, press “54”,

then press “ ” and “3”.

5 MUTE

Press to temporarily cut off the

sound.

6

W.LINK

CH LIST

VOL

W.LINK

CH LIST

Press to increase or decrease the

volume.

7 SOURCE

Press to display and select the

available video sources.

8 CH LIST

Used to display Channel Lists on the

screen.

9 TOOLS

Use to quickly select frequently used

functions.

0 UP▲/DOWN▼/LEFT◄/

RIGHT►/ENTER

Use to select on-screen menu items

and change menu values.

! INFO

Press to display information on the

TV screen.

@ COLOR BUTTONS

Use these button in the CH LIST and

W.LINK.

# CC

Controls the caption decoder.

$ E.MODE

Press to select the preset display

and sound modes for sports, cinema

and games.

% Use these buttons in the DMA,

W.LINK and Anynet+ modes. (

: This remote can be used to control

recording on Samsung recorders

with the Anynet+ feature)

^ ON/OFF

Press to backlight the buttons on the

remote.

This function is convenient for using

at night or when the room is dark.

(Using the remote control with the

light button set to On will reduce the

battery usage time.)

& PRE-CH

Tunes to the previous channel.

*

W.LINK

CH LIST

CH

W.LINK

CH LIST

Press to change channels.

( MENU

Displays the main on-screen menu.

) W.LINK (WISELINK)

This function enables you to view

and play photo and music files from

an external USB device. (Refer to

pages 72 (Photo) and 81 (Music))

a RETURN

Returns to the previous menu.

b EXIT

Press to exit the menu.

c MTS

Press to choose stereo, mono or

Separate Audio Program (SAP

broadcast).

d DMA (Digital Media Adapter)

Use this when connecting a

Samsung DMA device through an

HDMI interface and switching to

DMA mode.

For more information on the

operating procedures, refer to the

user manual of the DMA.

➢

This button is available when

“Anynet(HDMI-CEC)” is “On”.

(see page 88)

e P.SIZE

Picture size selection.

f FAV.CH

Press to switch to your favorite

channels.

BP68-00658A_Eng.indb 9 2008-04-22 오후 7:37:34

English - 10

Installing Batteries in the Remote Control

1 Lift the cover at the back of the remote control upward as shown in the figure.

2 Install two AAA size batteries.

➢

● Make sure to match the “+” and “–” ends of the batteries with the diagram inside the compartment.



● Do not mix battery types, i.e. alkaline and manganese.

3 Close the cover as shown in the figure.

➢

Remove the batteries and store them in a cool and dry place if you won’t be using the remote

control for a long time. The remote control can be used up to about 23 feet from the TV. (Assuming

typical TV usage, the batteries last for about one year.))

➢

Using the remote control with the On/Off( ) light button set to On will reduce the battery usage

time.

➢

 If the remote control doesn’t work! Check the following

1. Is the TV power on?

2. Are the plus and minus ends of the batteries reversed?

3. Are the batteries drained?

4. Is there a power cut, or is the power cord unplugged?

5. Is there a special fluorescent light or a neon sign nearby?

Connections

Connecting VHF and UHF Antennas

Ifyourantennahasasetofleadsthatlooklikethis,see“Antennaswith300ΩFlatTwin

Leads” below.

Ifyourantennahasoneleadthatlookslikethis,see“Antennaswith75ΩRoundLeads”.

If you have two antennas, see “Separate VHF and UHF Antennas”.

Antennaswith300ΩFlatTwinLeads

Ifyouareusinganoff-airantenna(suchasaroofantennaor“rabbitears”)thathas300Ωtwinflatleads,followthe

directions below.

1 Place the wires from the twin leads under the screws on a 300-75 Ω adapter (not supplied).

Use a screwdriver to tighten the screws.

2 Plug the adaptor into the ANT IN terminal on the side of the TV.

Antennaswith75ΩRoundLeads

1 Plug the antenna lead into the ANT IN terminal on the side of the TV.

Separate VHF and UHF Antennas

If you have two separate antennas for your TV (one VHF and one UHF), you must combine the two antenna signals before

connecting the antennas to the TV. This procedure requires an optional combiner-adaptor (available at most electronics

shops).

1 Connect both antenna leads to the combiner.

2 Plug the combiner into the ANT IN terminal on the bottom of the side panel.

BP68-00658A_Eng.indb 10 2008-04-22 오후 7:37:35

English - 11

Connecting Cable TV

To connect to a cable TV system, follow the instructions below.

Cable without a Cable Box

1 Plug the incoming cable into the ANT IN terminal on the side of the TV.

➢

Because this TV is cable-ready, you do not need a cable box to view unscrambled cable

channels.

Connecting to a Cable Box that Descrambles All Channels

1 Find the cable that is connected to the ANT OUT terminal on your cable box.

➢

This terminal might be labeled “ANT OUT”, “VHF OUT” or simply, “OUT”.

2 Connect the other end of this cable to the ANT IN terminal on the side of the TV.

Connecting to a Cable Box that Descrambles Some Channels

If your cable box descrambles only some channels (such as premium channels), follow the instructions below. You will need

a two-way splitter, an RF (A/B) switch, and four lengths of Antenna cable. (These items are available at most electronics

stores.)

1 Find and disconnect the cable that is connected

to the ANT IN terminal on your cable box.

➢

This terminal might be labeled “ANT IN”,

“VHF IN” or simply, “IN”.

2 Connect this cable to a two-way splitter.

3 Connect an Antenna cable between an

OUTPUT terminal on the splitter and the IN

terminal on the cable box.

4 Connect an Antenna cable between the ANT

OUT terminal on the cable box and the B–IN

terminal on the RF(A/B) switch.

5 Connect another cable between the other OUT

terminal on the splitter and the A–IN terminal on

the RF (A/B) switch.

6 Connect the last Antenna cable between the

OUT terminal on the RF (A/B) switch and the

ANT IN terminal on the side of the TV.

After you have made this connection, set the A/B switch to the “A” position for normal viewing. Set the A/B switch to the “B” position to

view scrambled channels. (When you set the A/B switch to “B”, you will need to tune your TV to the cable box’s output channel, which

is usually channel 3 or 4.)

Splitter

Incoming

cable

Splitter

Cable Box

Incoming

cable

Splitter

Cable Box

RF (A/B)

Switch

Incoming

cable

Splitter

Cable Box

Incoming

cable

RF (A/B)

Switch

Incoming

cable

Splitter

Cable Box

RF (A/B)

Switch

ANT OUT

ANT IN

TV Side

BP68-00658A_Eng.indb 11 2008-04-22 오후 7:37:37

English - 12

ConnectingaDVDPlayerorCableBox/Satellitereceiver(Set-TopBox)viaDVI

This connection can only be made if there is a DVI Output jack on the external device.

1 Connect a HDMI/DVI Cable

or DVI-HDMI Adapter

between the HDMI3/DVI IN

jack on the TV and the DVI

jack on the DVD Player or

Cable Box/Satellite receiver

(Set-Top Box).

2 Connect Audio Cables

between the HDMI3/DVI IN

[R-AUDIO-L] jack on the TV

and the DVD Player or Cable

Box / Satellite receiver (Set-

Top Box).

➢

Each DVD Player or Cable Box / Satellite receiver (Set-Top Box) has a different

back panel configuration.

➢

When connecting a DVD Player or Cable Box / Satellite receiver (Set-Top Box),

match the color of the connection terminal to the cable.

➢

When using an HDMI / DVI cable connection, you must use the HDMI3/DVI IN

jack.

ConnectingaDVDPlayerorCableBox/Satellitereceiver(Set-TopBox)viaHDMI

This connection can only be made if there is an HDMI Output jack on the external device. This connection will

provide the highest quality picture.

1 Connect an HDMI Cable

between the HDMI IN (1, 2 or

3) on the TV and the HDMI

jack on the DVD Player or

Cable Box / Satellite receiver

(Set-Top Box).

What is HDMI?

• HDMI, or high-definition multimedia interface, is an interface that enables the

transmission of digital audio and video signals using a single cable.

• The difference between HDMI and DVI is that the HDMI device is smaller in size and

has the HDCP (High Bandwidth Digital Copy Protection) coding feature installed.

➢

Each DVD Player or Cable Box / Satellite receiver (Set-Top Box) has a different

back panel configuration.

➢

The TV may not output sound and pictures may be displayed with abnormal color

when DVD Player or Cable Box / Satellite receivers supporting HDMI versions

older than 1.3 are connected. When connecting an older HDMI cable and there is

no sound, connect the HDMI cable to the HDMI3/DVI IN jack and the audio cables

to the HDMI3/DVI IN [R-AUDIO-L] jacks on the back of the TV. If this happens,

contact the company that provided the DVD Player or Cable Box / Satellite receiver

to confirm the HDMI version, then request an upgrade.

➢

HDMI cables that do not support HDMI version 1.3 may cause annoying flicker or

no screen display.

HDMI Cable (Not supplied)1

DVDPlayerorCableBox/

Satellite receiver (Set-Top Box)

TVSidePanel

DVDPlayerorCableBox/

Satellite receiver (Set-Top Box)

TVSidePanel

Audio Cable (Not supplied)2

HDMI/DVI Cable (Not supplied)1

or or

BP68-00658A_Eng.indb 12 2008-04-22 오후 7:37:43

English - 13

Connecting a Camcorder

The side panel jacks on your TV make it easy to connect a camcorder to your TV.

They allow you to view the camcorder tapes without using a VCR

1 Connect a Video Cable

(or S-Video Cable) between

the AV IN (1 or 2) [VIDEO]

(or S-VIDEO) jack on the TV

and the VIDEO OUT jack on

the Camcorder.

2 Connect Audio Cables

between the AV IN (1 or 2)

[L-AUDIO-R] jacks on the TV

and the AUDIO OUT jacks on

the Camcorder.

➢

Each Camcorder has a different back panel configuration.

➢

When connecting a Camcorder, match the color of the connection terminal to the cable

.

Camcorder

S-Video Cable (Not supplied)

1

Video Cable (Not supplied)1

Audio Cable (Not supplied)2

or

Connecting a DVD Player or Cable Box / Satellite receiver (Set-Top Box) via

Componet cables

ThesidepaneljacksonyourTVmakeiteasytoconnectaDVDPlayer/CableBox/Satellitereceiver(Set-TopBox)

to your TV.

1 Connect Component Cables

between the COMPONENT

IN (1 or 2) [Y, PB, PR]

jacks on the TV and the

COMPONENT [Y, PB, PR]

jacks on the DVD Player

or Cable Box / Satellite

receiver(Set-Top Box).

2 Connect Audio Cables

between the COMPONENT

IN (1 or 2) [R-AUDIO-L] jacks

on the TV and the AUDIO

OUT jacks on the DVD Player

or Cable Box / Satellite

receiver (Set-Top Box).

➢

Component video separates the video into Y (Luminance (brightness)), PB (Blue)

and PR (Red) for enhanced video quality. Be sure to match the component video

and audio connections. For example, if connecting the Component video cable to

COMPONENT IN 1, connect the audio cable to COMPONENT IN 1 also.

➢

Each DVD Player or Cable Box or Satellite receiver (Set-Top Box) has a different

back panel configuration.

➢

When connecting a DVD Player or Cable Box or Satellite receiver (Set-Top Box),

match the color of the connection terminal to the cable.

DVDPlayerorCableBox/

Satellite receiver (Set-Top Box)

TVSidePanel

Audio Cable (Not supplied)2

Component Cable (Not supplied)

1

TVSidePanel

BP68-00658A_Eng.indb 13 2008-04-22 오후 7:37:49

English - 14

Connecting a VCR

Video Connection

These instructions assume that you have already connected your TV to an antenna or a cable TV system (according

to the instructions on pages 10~11). Skip step 1 if you have not yet connected to an antenna or a cable system.

➢

If you have a “mono” (non-stereo) VCR, use a Y-connector (not supplied) to hook

up to the right and left audio input jacks of the TV.

If your VCR is stereo, you must connect two cables.

➢

Each VCR has a different back panel configuration.

➢

When connecting a VCR, match the color of the connection terminal to the cable.

VCRRearPanel

TVSidePanel

2

Audio Cable(Not supplied)5

Video Cable(Not supplied)4

Antenna cable(Not supplied)

3

S-Video Connection

Your Samsung TV can be connected to an S-Video jack on a VCR.

(This connection delivers a better picture as compared to a standard VCR.)

1 To begin, follow steps 1–3

in the previous section to

connect the antenna or cable

to your VCR and your TV.

2 Connect an S-Video Cable

between the S-VIDEO OUT

jack on the VCR and the AV

IN 1 [S-VIDEO] jack on the

TV.

3 Connect Audio Cables

between the AUDIO OUT

jacks on the VCR and the AV

IN 1 or 2 [R-AUDIO-L] jacks

on the TV.

An S-Video may be included with your VCR. (If not, check your local electronics store.)

➢

Each VCR has a different back panel configuration.

➢

When connecting a VCR, match the color of the connection terminal to the cable.

VCRRearPanel

TVSidePanel

Audio Cable (Not supplied)

3

S-Video Cable(Not supplied)2

Antenna cable(Not supplied)1

1 Unplug the cable or antenna

from the back of the TV.

2 Connect the cable or antenna

to the ANT IN terminal on the

back of the VCR.

3 Connect an Antenna Cable

between the ANT OUT

terminal on the VCR and the

ANT IN terminal on the TV.

4 Connect a Video Cable

between the VIDEO OUT

jack on the VCR and the AV

IN (1 or 2) [VIDEO] jack on

the TV.

5 Connect Audio Cables

between the AUDIO OUT

jacks on the VCR and the AV

IN (1 or 2) [VIDEO] jacks on

the TV.

BP68-00658A_Eng.indb 14 2008-04-22 오후 7:37:56

English - 15

Connecting an Amplifier / DVD Home Theater

1 Connect Audio Cables

between the AUDIO OUT

[R-AUDIO-L] jacks on the TV

and AUDIO IN [L-AUDIO-R]

jacks on the Amplifier/DVD

Home Theater.

When an audio amplifier is

connected to the “AUDIO

OUT [R-AUDIO-L]” jacks

terminals: Decrease the

volume of the TV, and adjust

the volume level with the

Amplifier’s volume control.

➢

Each Amplifier / DVD Home Theater has a different back panel configuration.

➢

When connecting an Amplifier / DVD Home Theater, match the color of the

connection terminal to the cable.

Amplifier /

DVD Home Theater

TVSidePanel

Audio Cable (Not supplied)

Connecting a Digital Audio System

The side panel jacks on your TV make it easy to connect a Digital Audio System to your TV.

1 Connect an Optical Cable

between the DIGITAL AUDIO

OUT (OPTICAL) jack on

the TV and the Digital Audio

Input (OPTICAL) jacks on the

Digital Audio System.

When a Digital Audio System

is connected to the “DIGITAL

AUDIO OUT (OPTICAL)”

jack:

Decrease the volume of the

TV, and adjust the volume

level with the system’s

volume control.

Digital Audio System

TVSidePanel

Optical Cable (Not supplied)

What is OPTICAL?

• An optical cable converts an electric signal into an optical light signal, and transmits

it through glass fibers. S/PDIF is a transmission system of digital audio in the form of

a light wave that uses a glass conductor.

➢

Each Digital Audio System has a different back panel configuration.

➢

When the receiver (home theater) is set to On, you can hear sound output from

the TV’s Optical jack. When the TV is displaying a DTV(air) signal, the TV will send

out 5.1 channel sound to the Home theater receiver. When the source is a digital

component such as a DVD and is connected to the TV via HDMI, only 2 channel

sound will be heard from the Home Theater receiver.

If you want to hear 5.1 channel audio, connect the DIGITAL AUDIO OUT

(OPTICAL) jack on the DVD player or Cable/Satellite Box directly to an Amplifier or

Home Theater, not the TV.

BP68-00658A_Eng.indb 15 2008-04-22 오후 7:38:02

English - 16

Using the D-Sub Cable

1 Connect a D-Sub Cable

between PC IN [PC] jack on

the TV and the PC output

jack on your computer.

2 Connect a PC Audio Cable

between the PC IN [AUDIO]

jack on the TV and the Audio

Out jack of the sound card on

your computer.

Using the HDMI/DVI Cable

1 Connect a HDMI/DVI cable

between the HDMI3/DVI IN

jack on the TV and the PC

output jack on your computer.

2

Connect a 3.5 mm Stereo

mini-plug/2RCA Cable cable

between the

DVI IN

[R-

AUDIO-L] jack on the TV

and the Audio Out jack of the

sound card on your computer.

➢

Each PC has a different back panel configuration.

➢

When connecting a PC, match the color of the connection terminal to the cable.

➢

When using an HDMI/DVI cable connection, you must use the HDMI3/DVI IN

terminal.

ConnectingaPC

PC

TVSidePanel

PCAudio Cable (Not supplied)2

D-Sub Cable (Not supplied)1

Using the D-Sub Cable

Using the HDMI/DVI Cable

TVSidePanel

PC

3.5 mm Stereo mini-plug/2RCA Cable (Not supplied)2

HDMI/DVI Cable (Not supplied)1

Operation

Turning the TV On and Off

PressthePOWERbuttonontheremotecontrol.

YoucanalsousethePOWERbuttonontheTV.

POWER

TV

CH LIST MENU W.LINK

TOOLS RETURN

INFO

RED

CC MTS DMA

E.MODE P.SIZE FAV.CH

GRN YEL BLU

EXIT

ON/OFF

PRE-CH

MUTE

SOURCE

BP68-00658A_Eng.indb 16 2008-04-22 오후 7:38:09

English - 17

Plug&PlayFeature

The first time you turn on your new TV, choose your basic settings for language, input source and channels, and

time of day using the plug and play feature. The TV will store these settings in memory. Storing the channels in

memory will allow you to scan the stored channels rather than have to enter their digits each time you want to

change channels.

When the TV is initially powered on, basic settings proceed automatically:

1 Press the POWER button on the remote control.

The message

Menu Language, Store Demo, Channels and Time will be set.

is automatically displayed.

2 Press the ENTER button to enter the language.

Press the ▲ or ▼ button to select language, then press the

ENTER button.

The message

Select 'Home Use' when installing this TV in your home. is

automatically displayed.

3 Press the ◄ or ► button to select Store Demo or Home Use, then press the

ENTER button.

 ➢

The default selection is Home Use.

 ➢

We recommend setting the TV to Home Use mode for the best picture in

your home environment.

 ➢

Store Demo mode is only intended for use in retail environments.

 ➢

If the unit is accidentally set to Store Demo mode and you want to return

to Home Use (Standard): Press the Volume button on the TV. When the

volume OSD is displayed, press and hold the MENU button on the TV for 5

seconds.

4 Press the ▲ or ▼ button to memorize the channels of the selected connection,

then press the ENTER button.

 ➢

Air: Air antenna signal.

Cable: Cable antenna signal.

Auto: Air and Cable antenna signals.

 ➢

In Cable mode, you can select the correct analog signal source among

STD, HRC, and IRC by pressing the ◄ or ► button, then press the ENTER

button. If you have Digital cable, select the signal source for both Analog

and Digital. Contact your local cable company to identify the type of cable

system that exists in your particular area.

Continued...

SkipEnterMove

Plug & Play

Menu Language, Store Demo, Channels and Time will

be set.

Enter

OK

SkipEnter

Plug & Play

Select the Antenna source to memorize

Air

Cable

Auto

Start

Move

Plug & Play

Select Language of the OSD.

Menu Language : English ►

Enter

Plug & Play

Select 'Home Use' when installing this TV in your home.

Home Use

Store Demo

EnterMove

Plug & Play

Select Language of the OSD.

Enter

Menu Language : English

Move

English

Español

Français

Start

SkipEnter

Plug & Play

Move

Selects the cable system.

Analog

Digital

STD

HRC IRC

HRC IRCSTD

Start

BP68-00658A_Eng.indb 17 2008-04-22 오후 7:38:11

English - 18

5 The TV will begin memorizing all of the available channels.

After all the available channels are stored, the Auto program menu reappears.

Press the

ENTER button when channel memorization is complete.

The

Clock Mode menu is displayed.

 ➢

To stop the search before it has nished, press the ENTER button with

stop selected.

6 Press the ENTER button.

Press the ▲ or ▼ button to select

Manual for setting the current time

manually, then press the ENTER button. The message Set current date and

time. is displayed.

 ➢

If you select Auto, Set to daylight saving time. is displayed, then go to

step 9.

7 Press the ◄ or ► button to move to Month, Day, Year, Hour, Minute, or

am/pm.

Set the date and time you want by pressing the ▲ or ▼ button, then press the

ENTER button.

 ➢

You can set the month, day, year, hour, and minute directly by pressing the

number buttons on the remote control.

8 The message Enjoy your watching. is displayed.

When you have nished, press the

ENTER button.

 ➢

Even if the ENTER button is not pressed, the message will automatically

disappear after several seconds.

Setting the Clock Automatically

9 Press the ENTER button.

Press the ▲ or ▼ button to select

Off or On, then the ENTER button.

The message

Select the time zone in which you live. is displayed.

10 Press the ▲ or ▼ button to highlight the time zone for your local area (and

to move the highlight to the appropriate time zone on the map of the United

States).

Press the

ENTER button.

If clock is not automatically set, see pages 52~53 to set the clock.

11 The message Enjoy your watching. is displayed.

When you have nished, press the

ENTER button.

 ➢

Even if the ENTER button is not pressed, the message will automatically

disappear after several seconds.

Continued...

Plug & Play

Auto Program is incomplete.

7 channels are memorized.

Air : 7 Cable : 0

OK

Enter Skip

Plug & Play

Set the Clock Mode.

Clock Mode : Auto

Auto

Manual

SkipEnterMove

Plug & Play

Auto Program in Progress.

Stop

Enter Skip

Air

3%

DTV Air : -- Air : --

DTV Cable : -- Cable : --

OK

Plug & Play

Enjoy your watching.

SkipEnter

Plug & Play

Set to daylight saving time.

DST : Off

Off

On

Move

Plug & Play

Set current date and time

01

Month

01

Day

2008

Year

12

Hour

00

Minute

am

am/pm

SkipEnterAdjustMove

Plug & Play

Select the time zone in which you live.

Newfoundland

Atlantic

Eastern

Central

Mountain

Pacific

▼

SkipEnterMove

OK

Plug & Play

Enjoy your watching.

BP68-00658A_Eng.indb 18 2008-04-22 오후 7:38:11

English - 19

If you want to reset this feature...

1

Press the MENU button to display the menu.

Press the ▲ or ▼ button to select Setup, then press the ENTER button.

2 Press the ENTER button to select Plug&Play. For further details on setting

up options, refer to the pages 17~18.

 ➢

The Plug & Play feature is only available in the TV .

Changing Channels

Using the Channel Buttons

1 Press the CH

W.LINK

CH LIST

or CH

W.LINK

CH LIST

button to change channels.

➢

When you press the CH

W.LINK

CH LIST

or CH

W.LINK

CH LIST

button, the TV changes channels

in sequence. You will see all the channels that the TV has memorized.

(The TV must have memorized at least three channels). You will not

see channels that were either erased or not memorized. See page 21 to

memorize channels.

Using the Number Buttons

1

Press the number buttons to go directly to a channel. For example, to select

channel 27, press 2, then 7.

The TV will change channels when you press the second number.

➢

For quick channel change, press the number buttons, then press the ENTER

button.

➢

You can press number buttons on Remote control for direct channel access,

press the same Number button again to switch between digital and analog

TV channels broadcast by the same station.

Using the “-” Button

The “ ” button is used to select stations that broadcast a digital signal.

1

For example, for Channel 7-1, press 7, then , then 1.

➢

HD indicates the TV is receiving a Digital High Definition signal.

SD indicates the TV is receiving a Standard Definition signal.

➢

For quick channel change, press the number buttons, then press the ENTER

button.

UsingthePRE-CHButtontoselectthePreviousChannel

Use the number buttons to quickly tune to any channel.

1

Press the PRE-CH button. The TV will switch to the last channel viewed.

➢

To quickly switch between two channels that are far apart, tune to one

channel, then use the number button to select the second channel.

Then use the PRE-CH button to quickly alternate between them.

Plug&Play  ►

Language : English

Time

V-Chip

Caption

External Settings

Entertainment : Off

PIP

Setup

Plug & Play

Menu Language, Store Demo, Channels and Time will

be set.

Enter

OK

Return

POWER

TV

CH LIST MENU W.LINK

TOOLS RETURN

INFO

RED

CC MTS DMA

E.MODE P.SIZE FAV.CH

GRN YEL BLU

EXIT

ON/OFF

PRE-CH

MUTE

SOURCE

POWER

TV

CH LIST MENU W.LINK

TOOLS RETURN

INFO

RED

CC MTS DMA

E.MODE P.SIZE FAV.CH

GRN YEL BLU

EXIT

ON/OFF

PRE-CH

MUTE

SOURCE

POWER

TV

CH LIST MENU W.LINK

TOOLS RETURN

INFO

RED

CC MTS DMA

E.MODE P.SIZE FAV.CH

GRN YEL BLU

EXIT

ON/OFF

PRE-CH

MUTE

SOURCE

POWER

TV

CH LIST MENU W.LINK

TOOLS RETURN

INFO

RED

CC MTS DMA

E.MODE P.SIZE FAV.CH

GRN YEL BLU

EXIT

ON/OFF

PRE-CH

MUTE

SOURCE

BP68-00658A_Eng.indb 19 2008-04-22 오후 7:38:12

English - 20

Adjusting the Volume

Using the Volume Buttons

Viewing the Menus

1 With the power on, press the MENU button.

The main menu appears on the screen. The menu’s left side has icons:

Picture, Sound, Channel, Setup, Input, Application.

2 Press the ▲ or ▼ button to select one of the icons.

Then press the ENTER button to access the icon’s sub-menu.

3 Press the EXIT button to exit.

➢

It takes about one minute until the on-screen menu disappears.

Mode : Standard

Contrast : 95

Brightness : 45

Sharpness : 50

Color : 50

Tint (G/R) : G50/R50

Detailed Settings

Picture Options

Picture

Viewing the Display

The display identifies the current channel and the status of certain audio-video settings.

1

Press the INFO button on the remote control.

The TV will display the channel, the type of sound, and the status of certain

picture and sound settings.

Press the INFO button once more or wait approximately 10 seconds and it disappears

automatically.

TV #1

Wed, Jan 2 12:28am

M. Spillane’s Mike Hammer

Bonocrunch

DTV Air

13-1

Dolby Digital

480i 4:3 English

11:36 pm - 12:42 am

1 Press the VOL

W.LINK

CH LIST

or VOL

W.LINK

CH LIST

button to increase or decrease the volume.

Using the Mute Button

At any time, you can cut off the sound using the MUTE button.

1

Press MUTE and the sound cuts off.

The is displayed on the screen.

2 To turn mute off, press the MUTE button again, or simply press the VOL

W.LINK

CH LIST

or

VOL

W.LINK

CH LIST

button.

POWER

TV

CH LIST MENU W.LINK

TOOLS RETURN

INFO

RED

CC MTS DMA

E.MODE P.SIZE FAV.CH

GRN YEL BLU

EXIT

ON/OFF

PRE-CH

MUTE

SOURCE

POWER

TV

CH LIST MENU W.LINK

TOOLS RETURN

INFO

RED

CC MTS DMA

E.MODE P.SIZE FAV.CH

GRN YEL BLU

EXIT

ON/OFF

PRE-CH

MUTE

SOURCE

POWER

TV

CH LIST MENU W.LINK

TOOLS RETURN

INFO

RED

CC MTS DMA

E.MODE P.SIZE FAV.CH

GRN YEL BLU

EXIT

ON/OFF

PRE-CH

MUTE

SOURCE

POWER

TV

CH LIST MENU W.LINK

TOOLS RETURN

INFO

RED

CC MTS DMA

E.MODE P.SIZE FAV.CH

GRN YEL BLU

EXIT

ON/OFF

PRE-CH

MUTE

SOURCE

BP68-00658A_Eng.indb 20 2008-04-22 오후 7:38:13

La page est en cours de chargement...

Samsung HL-61A750 Le manuel du propriétaire

Ce manuel convient également à

Samsung HL-61A750 Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents