SystemBuild HD22697 Mode d'emploi

7921403COM

24 in Cabinet

- Unit can tip over causing severe injury or death.

- Anchor unit to stud in wall (if instructed to).

- Do Not allow children to climb on unit.

- Put heavy items on lower shelves or drawers.

B347921403COM0

THIS INSTRUCTION BOOKLET CONTAINS

IMPORTANT

SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.

WARNING

For the latest information on SystemBuild products

follow us at Ameriwood Home

Tube

You

Date of Purchase ___ / ___ / ___

Lot Number:

Do Not Return This Product!

Contact our customer service team for help first.

Call: 1-866-452-4081 (toll free)

Monday-Friday 9am - 5pm CST

Visit: www.systembuild.com

Assembly Difficulty Meter

Easy

Tough

Contact Us!

Helpful Hints

2

systembuild.com

Do NOT return this product!

Contact our friendly customer service team first for help.

Call us!

1-866-452-4081

Monday-Friday

9am - 5pm CST

Visit systembuild.com to view the

limited warranty valid in the U.S. and Canada.

Assembly Tips

- Open your item in the area you plan to keep it to avoid excessive heavy lifting.

- Identify, sort and count the parts before attempting assembly.

- Compression dowels are lightly tapped in with a hammer.

- Slides are labeled with a

R

(right) and

L

(left) for proper placement.

- Make sure to always face the point on the top of the Cam Lock towards the

outer edge.

- Use all the nails provided for the back panel and spread them out equally.

- Back panel must be used to make sure your unit is sturdy.

- Do NOT use harsh chemicals or abrasive cleaners on this item.

- Never push, pull, or drag your furniture.

Tube

You

Tube

You

PEOPLE NEEDED FOR ASSEMBLY: 1-2

ESTIMATED ASSEMBLY TIME: 1 HOUR

3

systembuild.com

Before You Start

P

Q

u

i

c

k

T

i

p

A

s

e

m

bl

y

P

Cam Lock Fastening System

This Cam Lock Fastening System will be used throughout the assembly process.

1

3

2

4

Tube

You

Read through each step carefully and follow the proper order

Separate and count all your parts and hardware

Give yourself enough room for the assembly process

Have the following tools: Flat Head Screwdriver, #2 Phillips Head

Screwdriver and Hammer

Caution: If using a power drill or power screwdriver for screwing,

please be aware to slow down and stop when screw is tight.

Failure to do so may result in stripping the screw.

P

4

systembuild.com

Board Identification

Not actual size

Tube

You

Left Panel

37360015011

Right Panel

37360015021

Top

37362015030

Bottom

37921015040

Shelf

37362015050

Back Panel

K73621500

Door (x2)

37921403070

Adjustable Shelf (x3)

37362015060

A

B

F

G

H

This piece is paperboard construction.

It is not made from wood, but is

required for the assembly of your unit.

C

D

E

5

systembuild.com

Board Identification

Not actual size

Tube

You

This piece is paperboard construction.

It is not made from wood, but is

required for the assembly of your unit.

E

F

G

H

A

B

C

D

G

F

6

systembuild.com

Part List

Actual Size

Tube

You

Not Actual Size

(x8)

#A22620

cam lock

(x8)

#A22610

cam bolt

(x4)

#A17400

bolt

(x12)

#A80250

shelf support

(x8)

#A12420

5/8" screw

(x4)

#A13410

1-3/4" screw

(x4)

#A12930

1-1/8" screw

(x36)

#A21110

nail

(x4)

#A89210

door pad

10

11

12b

12c

12d

13

1

2

3

4

5

6

7

8

9

(x1)

#A84050

safety bracket kit

(x4)

#A44135

adjustable foot

(x2)

#A50395

handle

(x6)

#A65700

hinge

12

12a

7

systembuild.com

STEP

1

Tube

You

(x8)

#A22610

Detach the hinge plate from the hinge arm. Attach the hinge plates to the "A" and "B" panels as shown.

13

hinge arm

brazo de la bisagra

bras de charnière

hinge plate

placa de la bisagra

plaque de charnière

13

2

13

(x6)

#A65700

2

Press rear button on hinge

to release hinge plate.

8

systembuild.com

STEP2

Tube

You

1

12a

12b

(x8)

#A22620

(x1)

#A84050

Proper orientation of CAM LOCK

Tip

Assembly

Quick

C

E

1

12a

12b

Do not fully tighten this

screw in this step.

9

systembuild.com

STEP3

Tube

You

11

3

4

Unscrew the two piece foot as shown. After top part of foot is attached to

bottom shelf, screw on bottom part of foot. Be sure all four feet are level

with each other.

(x8)

#A12420

(x4)

#A12930

(x4)

#A44135

3

4

11

3

10

systembuild.com

STEP

4

Tube

You

U

NL

O

C

K

L

O

C

K

* raw edges are shaded

A

B

C

E

11

systembuild.com

STEP

5

Tube

You

* raw edges are shaded

(x4)

#A13410

6

C

E

A

B

D

6

12

systembuild.com

STEP6

Tube

You

(x36)

#A21110

IMPORTANT!

THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT

AND MUST BE INSTALLED PROPERLY.

Attached the back panel as shown nailing straight into the raw edges.

Assure that the unit is square.

Distance from corner to corner must be equal as shown.

7

H

7

Flush the edge of the back panel with the

bottom edge of the bottom shelf. Align

squarely and nail straight through into back

edges.

Assure that the unit is square.

Distance from corner to corner must

be equal as shown.

product collapse, and/or serious injury.

Por favor asegúrese que las Parte de atrás se atan

firmemente. Todos los clavos deben manejarse en las

partes recto y deben apretarse firmemente. El fracaso para

hacer para que podría causar inestabilidad, derrumbamiento

del producto, y/o la lesión seria.

S’il-vous-plaît assurez-vous que les PANNEAUX

ARRIÈRES sont attachés solidement. Tous les clous

doivent être enfoncés perpendiculairement et solidement

dans les parties. Sinon le meuble peut devenir instable,

s’effondrer subitement et/ou causer des blessures graves.

tightened firmly. Failure to do so could cause instability,

All nails must be driven into the parts straight and

Please make sure that the Backs are attached securely.

ADVERTENCIA

AVERTISSEMENT

WARNING

raw surface

superficie cruda

surface crue

13

systembuild.com

STEP

7

Tube

You

12c

12d

(x1)

#A84050

stud

montante

planche

wallboard

muro

mur

hole

agujero

trou

12d

12c

Option 2

Opción 2

L'option 2

Option 1

Opción 1

L'option 1

Option 1;

Securely screw (12c) into solid area of the

wall as shown.

Option 2:

Drill a 3/16" diameter hole (5mm) in the

wallboard. Tap the wall anchor(12d) into

the hole until it is flush. Fasten the wall

bracket (12a) to the wall anchor (12d) with

the screw (12c).

14

systembuild.com

STEP8

Tube

You

8

F

(x12)

#A80250

15

systembuild.com

STEP9

Tube

You

G

13

x2

(x6)

#A65700

16

systembuild.com

STEP10

Tube

You

10

5

(x4)

#A17400

(x2)

#A50395

G

hinge arm

brazo de la bisagra

bras de charnière

2nd

hinge plate

placa de la bisagra

plaque de charnière

1st

hook

gancho

crochet

Assistance of another person is advised in attaching the doors.

10

5

Repeat this step for installing the second door.

x2

17

systembuild.com

STEP

11

Tube

You

9

(x4)

#A89210

Position the rubber bumpers (9) on the edge of the top (C) and shelf (F) behind the doors (G).

18

systembuild.com

STEP12

Tube

You

B

A

C

A

Loosen screw C

Adjust door.

Tighten screw C

*side view

Suelte el tornillo C

Acomode la puerta.

Ajuste el tornillo C

*la vista lateral

Défaites le vis C

Ajustez la porte.

Serrez le vis C

*le côté envisagent

Loosen screw C

Turn screw B to

move door.

Tighten screw C

Suelte el tornillo C

Dé vuelta el tornillo B

para mover la puerta.

Ajuste el tornillo C

Défaites le vis C

Le vis du tour B

déplacer la porte.

Serrez le vis C

Loosen screw A

Adjust door.

Tighten screw A

Suelte el tornillo A

Acomode la puerta.

Ajuste el tornillo A

Défaites le vis A

Ajustez la porte.

Serrez le vis A

hinge cover

bisagra de la cubierta

couvre-charnière

Door Adjustment

Ajuste de la Puerta

Réglage de la Porte

19

systembuild.com

Tube

You

Maximum Loads

Warning: Risk of injury to persons - do not place a television on this furniture. This furniture is

not approved for use with a television.

Certificate of Conformity

1. This certificate applies to the Dorel Home Furnishings, Inc. product identified by this instruction manual.

2. This certificate applies to compliance of this product with the CPSC Ban on Lead-Containing Paint (16 CFR 1303).

3. This product is distributed by: Dorel Home Furnishings, Inc.

410 East First Street South

Wright City, MO 63390

636-745-3351

4. Site of Manufacture: Tiffin OH

5. See front page of instruction manual for date of manufacture.

This unit has been designed to support the maximum loads shown. Exceeding these load limits

could cause sagging, instability, product collapse, and/or serious injury.

0 lbs.

0 kg.

40 lbs.

18.1 kg.

35 lbs.

15.8 kg.

35 lbs.

15.8 kg.

50 lbs.

22.7 kg.

20

systembuild.com

Register your product to receive the following:

* New trend details - sneak peek on what's new

* Surveys - have a voice within our community

* Exclusive deals and discount codes

* Quick and easy replacement part service

To register your product, visit systembuild.com

Visit your local retailer's website, rate your purchased

product and leave us some feedback!

We would like to extend a big "Thank You" to all of

our customers for taking the time to assemble this

Systembuild product, and to give us your valuable

feedback.

Tube

You

La page est en cours de chargement...

SystemBuild HD22697 Mode d'emploi

Ce manuel convient également à

SystemBuild HD22697 Mode d'emploi

dans d''autres langues

Documents connexes

Autres documents