Samsung UE65F8000SL Guide de démarrage rapide

BN68-04794A-05

LED TV

user manual

Thank you for purchasing this Samsung product.

To receive more complete service, please register

your product at

www.samsung.com/register

Model _____________Serial No. _____________

e-Manual

MORE

Contact SAMSUNG WORLD WIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.

Country

Customer Care Centre

Web Site

AUSTRIA 0810 - SAMSUNG (7267864, € 0.07/min) www.samsung.com

BELGIUM 02-201-24-18 www.samsung.com/be (Dutch)

www.samsung.com/be_fr (French)

BOSNIA 051 331 999 www.samsung.com

BULGARIA 07001 33 11 , share cost tariff www.samsung.com/bg

CROATIA 062 SAMSUNG (062 726 786) www.samsung.com/hr

CZECH 800 - SAMSUNG (800-726786) www.samsung.com

Samsung Electronics Czech and Slovak, s.r.o. V Parku 2343/24, 148 00 - Praha 4

DENMARK 70 70 19 70 www.samsung.com

FINLAND 030-6227 515 www.samsung.com

FRANCE 01 48 63 00 00 www.samsung.com/fr

GERMANY 0180 6 SAMSUNG bzw.

0180 6 7267864*

(*0,20 €/Anruf aus dem dt. Festnetz, aus dem Mobilfunk

max. 0,60 €/Anruf)

www.samsung.com

CYPRUS 8009 4000 only from landline www.samsung.com/gr

GREECE 80111-SAMSUNG (80111 726 7864) only from land line

(+30) 210 6897691 from mobile and land line

www.samsung.com/gr

HUNGARY 06-80-SAMSUNG (726-7864) http://www.samsung.com/hu

ITALIA 800-SAMSUNG (726-7864) www.samsung.com

LUXEMBURG 261 03 710 www.samsung.com

MONTENEGRO 020 405 888 www.samsung.com

NETHERLANDS 0900-SAMSUNG (0900-7267864) (€ 0,10/Min) www.samsung.com

NORWAY 815 56480 www.samsung.com

POLAND

0 801-172-678* lub +48 22 607-93-33 **

*(całkowity koszt połączenia jak za 1 impuls według taryfy operatora)

** (koszt połączenia według taryfy operatora)

www.samsung.com/pl

PORTUGAL 808 20-SAMSUNG (808 20 7267) www.samsung.com

ROMANIA 08008 SAMSUNG (08008 726 7864)

TOLL FREE No.

www.samsung.com/ro

SERBIA 011 321 6899 www.samsung.com/rs

SLOVAKIA 0800 - SAMSUNG (0800-726 786) www.samsung.com

SPAIN 902172678 www.samsung.com

SWEDEN 0771 726 7864 (SAMSUNG) www.samsung.com

SWITZERLAND 0848 - SAMSUNG(7267864, CHF 0.08/min) www.samsung.com/ch (German)

www.samsung.com/ch_fr (French)

U.K 0330 SAMSUNG (7267864) www.samsung.com

EIRE 0818 717100 www.samsung.com

LITHUANIA 8-800-77777 www.samsung.com/lt

LATVIA 8000-7267 www.samsung.com/lv

ESTONIA 800-7267 www.samsung.com/ee

TURKEY 444 77 11 www.samsung.com

0_BN68-04794A-Cover.indd 1 2013-11-05  11:33:57

English - 2

Important Safety Instructions

Warning! Important Safety Instructions

(Please read the appropriate section that corresponds to the marking on your Samsung product before attempting to install the product.)

CAUTION

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO

NOT REMOVE COVER (OR BACK). THERE ARE NO USER SER-

VICEABLE PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED

PERSONNEL.

RISK OF ELECTRIC SHOCK DO NOT OPEN

This symbol indicates that high voltage is

present inside. It is dangerous to make any kind

of contact with any internal part of this product.

This symbol alerts you that important literature

concerning operation and maintenance has

been included with this product.

• The slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation. To ensure reliable operation of this apparatus,

and to protect it from overheating, these slots and openings must never be blocked or covered.

− Do not cover this apparatus in a conﬁned space, such as a bookcase, or built-in cabinet, unless proper ventilation is provided.

− Do not place this apparatus near or over a radiator or heat resistor, or where it is exposed to direct sunlight.

− Do not place a water containing vessel(vases etc.) on this apparatus, as this can result in a risk of ﬁre or electric shock.

• Do not expose this apparatus to rain or place it near water(near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a

swimming pool etc.). If this apparatus accidentally gets wet, unplug it and contact an authorized dealer immediately. Make sure to pull out the power

cord from the outlet before cleaning.

• This apparatus use batteries. In your community there might be regulations that require you to dispose of these batteries properly under

environmental considerations. Please contact your local authorities for disposal or recycling information.

• Do not overload wall outlets, extension cords or adaptors beyond their capacity, since this can result in ﬁre or electric shock.

• Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular

attention to cords at plug end, adaptors and the point where they exit from the appliance.

• To protect this apparatus from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and

disconnect the antenna or cable system. This will prevent damage to the set due to lightning and power line surges.

• Before connecting the AC power cord to the DC adaptor outlet, make sure the voltage designation of the DC adaptor corresponds to the local

electrical supply.

• Never insert anything metallic into the open parts of this apparatus. Doing so many create a danger of electric shock.

• To avoid electric shock, never touch the inside of this apparatus. Only a qualiﬁed technician should open this apparatus.

• Make sure to plug the power cord in until it is ﬁrmly inserted. When removing the power cord, make sure to hold the power plug when pulling the

plug from the outlet. Do not touch the power cord with wet hands.

• If this apparatus does not operate normally - in particular, if there are any unusual sounds or smells coming from it - unplug it immediately and

contact an authorized dealer or service centre.

• Be sure to pull the power plug out of the outlet if the TV is to remain unused or if you are to leave the house for an extended period of time (especially

when children, elderly or disabled people will be left alone in the house).

− Accumulated dust can cause an electric shock, an electric leakage or a ﬁre by causing the power cord to generate sparks and heat or the

insulation to deteriorate.

• Be sure to contact an authorized service centre, when installing your set in a location with heavy dust, high or low temperatures, high humidity,

chemical substances and where it operates for 24 hours such as the aerial port, the train station etc.

• Failure to do so may cause serious damage to your set.

• Use only a properly grounded plug and receptacle.

− An improper ground may cause electric shock or equipment damage. (Class l Equipment only.)

• To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains plug shall be readily operable.

• Do not allow children to hang onto the product.

• Store the accessories (battery, etc.) in a location safely out of the reach of children.

• Do not install the product in an unstable location such as a shaky self, a slanted ﬂoor or a location exposed to vibration.

• Do not drop or impart any shock to the product. If the product is damaged, disconnect the power cord and contact a service centre.

• Unplug the power cord from the power outlet and wipe the product using a soft, dry cloth. Do not use any chemicals such as wax, benzene, alcohol,

thinners, insecticide, aerial freshener, lubricant or detergent. This may damage the appearance or erase the printing on the product.

• Apparatus shall not be exposed to dripping or splashing.

• Do not dispose of batteries in a ﬁre.

• Do not short circuit, disassemble or overheat the batteries.

• Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

• WARNING - TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OTHER OPEN FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES.

[UF8000-XC]BN68-04794A-05L04.indb 2 2013-10-29  9:41:28

English - 3

English

Figures and illustrations in this User Manual are provided for reference only and may differ from the actual product

appearance. Product design and speciﬁcations may change without notice.

CIS languages (Russian, Ukrainian, Kazakhs) are not available for this product, since this is manufactured for

customers in EU region.

Features for your new TV

• 3D: This new feature enables you to view 3D content.

• SMART HUB:

This TV features Smart Hub, a multi-purpose entertainment and family centre. With Smart Hub, users can surf

the web, download applications, and stay in touch with family and friends through social networking services. In

addition, you can enjoy photo, video, and music ﬁles stored on external storage devices.

Press the

™

button to launch Smart Hub. Choose a service using the icons displayed in the top part of the screen.

Social: Watch the latest YouTube videos and you and your friends' video posts on Facebook and Twitter. You can

also make video calls to friends by the TV camera.

Apps: Download and install applications such as Web Browser.

On TV: Check a listing of programmes that are currently aerialing and are scheduled to aerial. (Depending on the

country)

Films and TV Shows: Purchase and watch movies and series without a separate external device. (Depending on

the country)

Photos, Videos & Music: Play back photo, video, and music ﬁles from an external storage device.

• Anynet+ (HDMI-CEC): This allows you to control all connected Samsung devices that support Anynet+ with your

Samsung TV’s remote.

• e-Manual: Provides a detailed, on-screen user's manual built into your TV. (page 13)

• SMART Interaction: Using this function, you can access and control menu options and functions using motions.

• Device Manager: Use the TV features with a USB or Bluetooth keyboard and mouse.

• MHL & Screen Mirroring: Displays mobile device screens on your TV using a wired or wireless connection.

Correct Disposal of This Product (Waste Electrical & Electronic Equipment)

(Applicable in countries with separate collection systems)

This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset,

USB cable) should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the

environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle

them responsibly to promote the sustainable reuse of material resources.

Household users should contact either the retailer where they purchased this product, or their local government ofﬁce, for details of

where and how they can take these items for environmentally safe recycling.

Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its

electronic accessories should not be mixed with other commercial wastes for disposal.

Correct disposal of batteries in this product

(Applicable in countries with separate collection systems)

This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other

household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery

contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66. If batteries are not properly disposed of,

these substances can cause harm to human health or the environment.

To protect natural resources and to promote material reuse, please separate batteries from other types of waste and recycle them

through your local, free battery return system.

[UF8000-XC]BN68-04794A-05L04.indb 3 2013-10-29  9:41:28

English - 4

Accessories

✎

Please make sure the following items are included with your TV. If any items are missing, contact your dealer.

✎

The items’ colours and shapes may vary depending on the models.

✎

Cables not included in the package contents can be purchased separately.

✎

Check that there is no accessory hidden behind packing materials when you open the box.

[

CAUTION: INSERT SECURELY LEST SHOULD BE DETACHED IN SET

• Smart Touch Control & Batteries (AAA x 2) • Power Cord

• Remote Control & Batteries (AAA x 2) • Samsung 3D Active Glasses

• User Manual • Warranty Card (Not available in some locations)

• Regulatory Guide

Scart Adapter IR Extender Cable AV Adapter Component adapter CI Card Adapter

Power cover Wall mount adapter x 2 TV-Holder Kit Cable manager

• An administration fee may be charged if either

− (a) an engineer is called out at your request and there is no defect in the product

(i.e. where you have failed to read this user manual)

− (b) you bring the unit to a repair centre and there is no defect in the product

(i.e. where you have failed to read this user manual).

• The amount of such administration charge will be advised to you before any work or home visit is carried out.

Warning: Screens can

be damaged from direct

pressure when handled

incorrectly. We recommend

lifting the TV by the edges,

as shown.

Don't Touch

This Screen!

Wireless Keyboard (Sold Separately)

[UF8000-XC]BN68-04794A-05L04.indb 4 2013-10-29  9:41:30

English - 5

English

Basic Features

Using the Smart Touch Control

TouchPad

• Drag on the touchpad to move the focus

on the screen.

• Press the touchpad to run, activate, or

select the highlighted item.

• Press and hold the touchpad to display

the Channel List.

VOICE

˜

Take your voice command and enter a text

using your voice.

You can use the MIC to give Voice Recognition commands. Simply press the VOICE

˜

button.

✎

Voice Recognition function can be affected by unclear pronunciation, voice level, or surrounding noise.

Displays a virtual remote panel on the screen.

See the e-Manual chapter, Controlling TV >

Using the Virtual Remote Control.

Press and hold the MORE button to select a

desired function (e.g. MENU (

m

),

TOOLS (

T

), INFO (

`

), etc.) easily.

Changes channels.

View each digital channel's programming

schedule, including showtimes. In addition,

sets a Schedule Viewing or Schedule

Recording to press the touchpad on the

programme entry scheduled to air later.

Turn on and off the satellite or cable set-top

box connected to the TV. For this, the Smart

Touch Control must be conﬁ gured as a

universal remote control.

Turns the TV on and off.

Displays and selects the available video

sources.

Adjusts the volume.

Cuts off the sound

temporarily.

Press and hold this button

to select Audio Description

and Subtitle. (Depending on

the country or region.)

Returns to the previous menu. Press and

hold this button to exit all currently running

applications.

Brings up Smart Hub applications. See the

e-Manual chapter, Smart TV Features >

Smart Hub.

✎

To exit an application that is running,

press the

™

button.

Toggles this button between Recommended

and Search.

Connecting to the TV

In order to operate the TV using a Smart Touch Control, you must ﬁ rst pair it to the TV via Bluetooth. However, the Smart Touch Control is only available

for the paired Samsung TV.

✎

We recommend to use the Smart Touch Control in less than 6m. A usable distance may differ depending on the wireless environmental

conditions.

1. When the TV is off, point the Smart Touch Control at the remote control receiver of the TV and press the TV button for the ﬁ rst pairing. Only this

buttons sends an IR signal. The remote control receiver's location may vary depending on the model.

2. A Bluetooth icon will appear at the bottom left of the screen as shown below. The TV will then attempt to connect to the Smart Touch Control

automatically.

Reconnecting the Smart Touch Control

If the Smart Touch Control stops operating or works abnormally, replace the battery as this may be caused by insufﬁ cient battery power. If

the problem persists, press the PAIRING button on the Smart Touch Control to restore pairing with the TV. The PAIRING button cannot be

accessed without removing the Smart Touch Control's battery cover. Within a distance between 30cm to 4m, point the Smart Touch Control to

the TV receiver and press the PAIRING button. When pairing is complete, the pairing image displays at the bottom left of the TV screen.

The colour buttons work differently, depending

on the function that the TV is currently

performing.

Press and hold the

{

button while watching

TV to view information about the current

programme.

[UF8000-XC]BN68-04794A-05L04.indb 5 2013-10-29  9:41:30

English - 6

Battery Low Alarm

If the battery becomes and blanks low while using the Smart Touch Control, the following alarm window blinks and appears at the

bottom left of the screen. If the alarm window pops up, replace the batteries of the Smart Touch Control. Use alkaline batteries for

longer usage.

Inserting the Batteries (AAA X 2)

1. Slightly lift the battery cover using a plastic card. Next,

pull on the cover’s notch with a ﬁngernail to remove

the cover completely.

✎

Check the location of the battery cover groove.

The groove's location may vary depending on

the type of Smart Touch Control is provided

with the product.

1

2

3

2. Insert 2 AAA batteries, making sure to align the positive and negative ends correctly.

3. Align the battery cover with the back of the remote control and press down along the edges until it is cleanly attached to the remote control.

Using the Touchpad

Use the touchpad to perform various commands. Navigate to Tutorial (Screen Menu > System > Device Manager >

Smart Touch Control Settings > Tutorial) to view an on-screen guide to using the Smart Touch Control.

Dragging Press

Drag on the touchpad in the desired direction.

Move the focus or the pointer in the direction the ﬁnger is dragging.

Press on the touchpad. This selects the focused item. When watching TV,

pressing and holding the touchpad displays the channel list. On some apps,

pressing and holding the touchpad for over 2 seconds displays a list of functions

available for the app.

Changing Channels by Entering Numbers

While watching TV, tap on the protruding line on the left or right edge of the touchpad

to bring up the numerical input window on the screen. Use your ﬁnger to enter the

number for the channel you want to watch. The recognised number is displayed on the

screen and the TV switches to the corresponding channel. See the e-Manual chapter,

Controlling TV > Touchpad.

Numerical Input Guide

Refer to the diagrams below when entering numerical values. The TV may not recognise your entries if you do not

follow the sequences shown below.

[UF8000-XC]BN68-04794A-05L04.indb 6 2013-10-29  9:41:31

English - 7

English

Show Status and Notiﬁcation Banner

Press the MORE button on the Smart Touch Control and then select STATUS on the virtual remote panel to display the

status and notiﬁcation banner at the top of the screen.

Recommendations

Press the RECOMM. / SEARCH button and then select Recommended from the list displayed at the bottom of

the screen. Select a programme that is currently airing to jump to the corresponding channel or a programme that

is scheduled to air to set up a Schedule Viewing or Schedule Recording setting. Select an application to launch.

Samsung Apps will launch if the selected application is not installed on the TV.

History

Press the RECOMM. / SEARCH button and then select History from the list displayed at the bottom of the screen.

This displays an interactive list of recently accessed channels, media content and applications.

✎

The RECOMM. / SEARCH button may function as a History recall feature, depending on your country or region.

Deleting History Data

You can delete the history information about recently viewed channels, content and applications.

Searching

Press the RECOMM. / SEARCH button on the Smart Touch Control. The list appears at the bottom of the screen. Press the

RECOMM. / SEARCH button again. The keypad will appear on the screen. Enter search criteria to search not only many apps and

their contents on the TV but also the Web. This button toggles between Recommended and Search.

Adjusting the Touchpad

Users can adjust the sensitivity of the Smart Touch Control’s touchpad. Set Touch Sensitivity to adjust sensitivity and

make it more convenient to use.

Using the Virtual Remote Control

Press MORE button to display the virtual remote panel on the screen. The virtual remote panel consists of a number

panel, a playback control panel, and a quick access panel. Use the touchpad to select numbers and buttons.

✎

The displayed virtual remote panel on the TV screen may differ depending on the country.

Changing the Virtual Remote Panel

Choose the number panel, playback control panel, or quick access panel as the panel to be shown on the screen.

Use the touchpad to keep moving the focus left or right. The panel changes when the focus is moved beyond the

leftmost or rightmost edge.

✎

Use left / right scroll function on the touchpad to change the panel easily.

Using the Number Panel

Use the number panel to enter numbers on a keypad screen or webpage or to change the channel while watching TV.

Changing the channel using the number pad leaves a record, allowing you to easily return to previous channels.

Using the Playback Control Panel

Use the playback control panel to pause, rewind, fast forward, skip to the next ﬁle, and much more while enjoying

media content.

Using the Quick Access Panel

Quickly access the INFO, MENU and e-Manual buttons. However, the availability of buttons vary depending on the

operating mode of the Smart Touch Control unit (with the TV only, as a universal remote, etc.).

[UF8000-XC]BN68-04794A-05L04.indb 7 2013-10-29  9:41:31

English - 8

Using the Remote Control

Learn where the function buttons are on your remote. Especially note these: SOURCE, MUTE,

Y

,

<

P

>

,

MENU, TOOLS,

E

, INFO, CH LIST, RETURN, GUIDE and EXIT.

✎

This remote control has Braille points on the Power, Channel, and Volume buttons and can be used by visually

impaired persons.

✎

Your TV also comes with a Smart Touch Control. For information about the Smart Touch Control, refer to the

e-Manual.

BCD

TTX/MIX

SOURCE

PRE-CH

CH LIST

MENU

SMART

HUB

GUIDE

TOOLS

INFO

RETURN

EXIT

E-MANUAL

AD/SUBT.

MUTE

Displays and selects the available

video sources.

Cuts off the sound temporarily.

Brings up Smart Hub applications.

See the e-Manual chapter, Smart TV

Features > Smart Hub.

Changes channels.

Exits the menu.

Displays the EPG (Electronic

Programme Guide).

Displays information on the TV screen.

Turns the TV on and off.

Gives direct access to channels.

Adjusts the volume.

Displays channel lists on the screen.

Alternately select Teletext ON Double,

Mix or OFF.

E-MANUAL: Displays the e-Manual.

W

: Turns the 3D function on or off.

See e-Manual chapter TV Viewing >

3D TV.

AD/SUBT.: Turns the audio description

on and off (not available in some

locations)./ Displays digital subtitles.

See e-Manual chapter TV Viewing >

Subtitles.

'

: Stop.

Returns to the previous channel.

Opens the OSD (Menu).

Quickly selects frequently used

functions.

Returns to the previous menu.

Use these buttons according to the

directions on the TV's screen.

Use these buttons in a speciﬁc feature.

Use these buttons according to the

directions on the TV's screen.

Moves the cursor, selects the on-

screen menu items, and changes the

values seen on the TV's menu.

[UF8000-XC]BN68-04794A-05L04.indb 8 2013-10-29  9:41:31

English - 9

English

Installing batteries (Battery size: AAA)

Match the polarity of the batteries to the symbols in the battery compartment.







✎

NOTE

− Use the remote control within 23 feet of the TV.

− Bright light may affect the performance of the remote control. Avoid using when near special ﬂuorescent lights

or neon signs.

− The colour and shape may vary depending on the model.

Turning on the TV

Turn on the TV using the

P

button on the remote control or TV panel.

✎

The product colour and shape may vary depending on the model.

✎

The TV’s Controller, a small joy stick like button on the rear right side of the TV, lets you control the TV without the

remote control.

mR

P

Remote control sensor

When you use the Smart Touch Control, a standby

LED does not work (except

P

button).

Camera

Function menu

TV Controller

The image is drawn by facing the front

side of the TV.

[UF8000-XC]BN68-04794A-05L04.indb 9 2013-10-29  9:41:32

English - 10

Built-in TV Camera and Microphone

This TV features a built-in TV camera that can be used for the Motion Control, Voice Recognition (built-in microphone),

and Face Recognition features. You can also use the knob for camera's angle adjustment to change the camera's

viewing angle.

From the Top From Behind

Microphone

Lens

Knob for camera's angle adjustment

Microphone

Extending the TV Camera

In order to use the TV camera, you must ﬁrst extend it.

Gently push the camera in without touching the lens until you hear a click.

Retracting the Camera

If you are not using the TV camera, keep it retracted inside the TV. The Motion Control and Face

Recognition features cannot be used while the TV camera is in the retracted state, but Voice Recognition

will still be available.

Gently push the camera in without touching the lens until you hear a click.

경고 주의

경고

주의

Do not touch the lens while operating the TV camera. Leave

ﬁngerprints that may affect the image quality. If the lens gets dirty,

clean it using a soft piece of cloth.

[UF8000-XC]BN68-04794A-05L04.indb 10 2013-10-29  9:41:34

English - 11

English

Universal Remote Setup

This TV has a universal remote control feature that lets you control cable boxes, Blu-ray players, home theatres, and

other third-party external devices connected to the TV using the TV's remote control.

5 cm

Keep a distance of 5 cm at least between the IR EXTENDER CABLE and the external device, as the illustration shows.

Face the IR EXTENDER CABLE toward the external device’s remote control signal receiver. Note that it should be no

obstacle between IR Extender and external device. The presence of an obstacle will interfere with the transmission of

the remote control signal.

Add the External Device

1. Turn on the external device you wish to set up universal remote function for and then press SOURCE to bring up

the Source screen.

2. Select Universal remote setup from the top of the screen. This initiates the universal remote setup process.

3. Follow the on-screen instruction and set up the universal remote control. If it does not work, set up the remote

control by entering the model number manually.

SETUP

The initial setup dialog appears when the TV is ﬁrst activated. Follow the on-screen instructions to ﬁnish the initial setup

process, including menu language choice, channel scan, network connection, and more. At each step, either make a

choice or skip the step. Users can manually perform this process at a later time under the Screen Menu > System >

Setup menu.

✎

If you connect any device to HDMI1 before starting the installation, the Channel Source will be changed to

Set-top box automatically.

✎

If you do not want to select Set-top box, please select Aerial.

Password Change

Screen Menu > System > Change PIN

Change the TV's password.

1. Run Change PIN and then enter the current password in the password ﬁeld. The default password is “0-0-0-0”.

2. Enter a new password and then enter it again to conﬁrm it. The password change is complete.

✎

If you forget the PIN code, press the buttons in the following sequence which resets the PIN to “0-0-0-0”:

For Standard Remote Control: In Standby mode: MUTE → 8 → 2 → 4 → POWER (On)

For Smart Touch Control: When the TV turns on: MUTE → Volume up → RETURN → Volume down →

RETURN → Volume up → RETURN

[UF8000-XC]BN68-04794A-05L04.indb 11 2013-10-29  9:41:34

English - 12

Switching Between Video

Sources

Press SOURCE button to switch between devices

connected to the TV.

For example, to switch to a game console connected

to the second HDMI connector, press SOURCE button.

From the Source list, select HDMI2. The connector

names may vary depending on the product. Select Tools

button at the upper-right corner of the screen to access

the following functions.

• Anynet+ (HDMI-CEC)

A list appears showing Anynet+ compatible ones of

external devices connected to the TV.

✎

This function is only available Anynet+ (HDMI-

CEC) function set to On.

• Edit Name

You can rename devices connected to the TV to

more easily identify external sources.

With a computer connected to the TV's HDMI (DVI)

port via an HDMI cable, for example, you can change

Edit Name to PC.

With a computer connected to the TV's HDMI (DVI)

port via an HDMI-to-DVI cable, for example, you can

change Edit Name to DVI PC.

With an AV device connected to the TV's HDMI (DVI)

port via an HDMI-to-DVI cable, for example, you can

change Edit Name to DVI Devices.

• Information

View detailed information about the connected

devices.

• Disconnect USB Device

Remove the USB device from the list safely. This

function is only available when the USB device

selected.

• Universal remote setup

To add a new external device to control it with the

Smart Touch Control, press the SOURCE button and

select Universal remote setup on the top right of

the screen.

Using the universal remote control, users can control

external devices connected to the TV, such as a

settop box, Blu-ray player, and AV receiver.

Connecting to a COMMON

INTERFACE slot

(Your TV viewing Card Slot)

✎

Turn the TV off to connect or disconnect a CI card

or CI card adapter.

Attaching the CI Card Adapter

TV Rear

Attach the adapter as shown above.

✎

To install the CI CARD Adapter, please remove the

sticker attached to the TV.

To connect the CI CARD Adapter, follow these steps.

✎

We recommend attaching the adapter before

installing the wall mount, or inserting the “CI or CI+

CARD”.

1. Insert the CI CARD Adapter into the two holes on the

product 1.

✎

Please find two holes on the rear of the TV,

beside the COMMON INTERFACE port.

2. Connect the CI CARD Adapter into the COMMON

INTERFACE port on the product 2.

3. Insert the “CI or CI+ CARD”.

We recommend that you insert the CI card before you

mount the TV on a wall. It may be difﬁcult to insert after

mounting. Insert the card after attaching the CI Card

Adapter on TV. It is difﬁcult to attach the module if you

insert the card before attaching.

Using the “CI or CI+ CARD”

• If you don’t insert the “CI or CI+ CARD”, some

channels will display the message “Scrambled

Signal”.

[UF8000-XC]BN68-04794A-05L04.indb 12 2013-10-29  9:41:35

English - 13

English

• The pairing information containing a telephone

number, the “CI or CI+ CARD” ID the Host ID and

other information will be displayed in about 2~3

minutes. If an error message is displayed, please

contact your service provider.

• When the conﬁguration of channel information has

ﬁnished, the message “Updating Completed” is

displayed, indicating the channel list is updated.

✎

NOTE

• You must obtain a “CI or CI+ CARD” from a local

cable service provider.

• When removing the “CI or CI+ CARD”, carefully

pull it out with your hands since dropping the “CI

or CI+ CARD” may cause damage to it.

• Insert the “CI or CI+ CARD” in the direction

marked on the card.

• The location of the COMMON INTERFACE slot

may be different depending on the model.

• “CI or CI+ CARD” is not supported in some

countries and regions; check with your

authorized dealer.

• If you have any problems, please contact a

service provider.

• Insert the “CI or CI+ CARD” that supports

the current aerial settings. The screen will be

distorted or will not be seen.

The Evolution Kit Slot

(Kit Sold Separately)

TV Rear

Attaching the Evolution Kit to your Samsung TV

upgrades the TV’s hardware and software without your

needing to purchase a new TV. With the Evolution Kit,

you can keep your TV updated with the latest features

and services provided by Samsung Electronics.

✎

The Evolution Kit is sold separately. When users

purchase an Evolution Kit released in 2014 or

later, the user's TV can be upgraded to match the

software version of the Evolution Kit. However, an

Evolution Kit may not be available, depending on the

product.

✎

The colour and design of the Evolution Kit may vary

depending on the model.

Viewing the e-Manual

The embedded e-Manual contains information about

your TV's key features.

This TV has a built-in user guide. To read it, use one of

the following methods:

• Open the Support menu and choose e-Manual

(Troubleshooting).

• Press the E-MANUAL button on the standard

remote control.

• Press the MORE button on the Smart Touch Control

to display control buttons on the screen. Flick the

touchpad until e-Manual appears and select it.

✎

Words in blue refer to screen menu options and

words in light blue refer to remote control buttons.

✎

A printable version of this guide is also available at

www.samsung.com/support.

Scrolling a Page

To scroll a page, use of one of the following methods:

• Press the

or button on the scroll bar at the

right edge of the screen.

• Drag or ﬂick up or down the line on either the left or

right edge of the touchpad.

• Place the focus on the

or button at the right

edge of the screen, drag or ﬂick up or down on the

touchpad.

Using the Top Icons

Use the Back, Forward, and Opened page icons on the

top left of the screen to navigate through pages. These

icons are available when two or more pages are passed.

Returning to the Home Page

To return to the home page, press the

a

button or select

on the top right of the screen.

Searching the Index

Press the

b

button or select on the top right of the

screen to display the index. Select a term to display the

page containing the term.

Searching Pages

Press the

{

button or select on the top of the

screen to access the search screen. Enter a search

phrase and select Done. Select an item from the search

results list to navigate to the relevant page.

[UF8000-XC]BN68-04794A-05L04.indb 13 2013-10-29  9:41:36

English - 14

Closing the e-Manual

To close the e-Manual, press and hold the RETURN button or select at the upper-right corner of the screen or

press EXIT button.

Jumping to a Menu Item

To directly jump to the menu item that is described in the current section, select

Try Now

. It is possible to jump from

a menu item directly to the related section in the e-Manual. If you want to read an e-Manual entry on a speciﬁc screen

menu feature, press the virtual remote panel's or the regular remote's E-MANUAL button to load the corresponding

e-Manual page.

✎

This feature may not be available, depending on the menu.

Updating the e-Manual

Open the Smart Hub and select Apps, and then select More Apps. The e-Manual can be updated in the same way

with an application update.

On the More Apps screen, select Apps to update, and then select e-Manual from the list. The e-Manual starts

updating to the latest version. However, Apps to update appears on the screen only when the update is required.

Connecting to a Network

Connecting the Smart TV to a network gives you access to online services such as the Smart Hub, as well as software

updates.

Network Connection - Wireless

Connect the TV to the Internet using a standard router or modem.

Wireless IP Router or Modem

that has a DHCP Server

LAN Cable (Not Supplied)

The LAN Port on the Wall

Wireless Network Precautions

• This Smart TV supports the IEEE 802.11a/b/g /n communication protocols. Samsung recommends using IEEE

802.11n. Otherwise when you play video over a network connection, the video may not play smoothly.

• To use a wireless network, the TV must be connected to a wireless router or modem. If the wireless router

supports DHCP, the TV can use a DHCP or static IP address to connect to the wireless network.

• Select a channel that is not currently in use for the wireless router. If the channel set for the wireless router is

currently being used by another device, the result is usually interference and/or a communications failure.

• Most wireless networks have an optional security system. To enable a wireless network's security system, you

need to create a security key using characters and numbers. This security key is then needed to connect to the

wireless network.

Network Conﬁguration

[UF8000-XC]BN68-04794A-05L04.indb 14 2013-10-29  9:41:37

English - 15

English

Network Security Protocols

The TV only supports the following wireless network security protocols and is unable to connect to non-certiﬁed

wireless routers:

• Authentication Modes: WEP, WPAPSK, WPA2PSK

• Encryption Types: WEP, TKIP, AES

If the wireless router has been set to Pure High-throughput (Greenﬁeld) 802.11n mode and the Encryption Type to

WEP or TKIP, Samsung Smart TVs will not support the connection in compliance with the new Wi-Fi certiﬁcation

speciﬁcations.

If the wireless router supports WPS (Wi-Fi Protected Setup), it is possible to connect to the network using PBC (Push

Button Conﬁguration) or a PIN (Personal Identiﬁcation Number). WPS automatically conﬁgures the SSID and WPA key

settings.

Network Connection - Wired

There are three main ways to connect your TV to your network using cable, depending on your network setup. They

are illustrated starting below:

The Modem

Port on the Wall

Modem Cable (Not Supplied) LAN Cable (Not Supplied)

TV Rear Panel

External Modem

(ADSL / VDSL / Cable TV)

The Modem

Port on the Wall

Modem Cable

(Not Supplied)

LAN Cable

(Not Supplied)

LAN Cable

(Not Supplied)

TV Rear Panel

External Modem

(ADSL / VDSL / Cable TV)

IP Router that has a

DHCP Server

The LAN Port

on the Wall

LAN Cable (Not Supplied)

TV Rear Panel

✎

The TV does not support network speeds less than or equal to 10Mbps.

✎

Use Cat 7 cable for the connection.

[UF8000-XC]BN68-04794A-05L04.indb 15 2013-10-29  9:41:37

English - 16

3D Basics

Features

Samsung's SSG-5100GB 3D glasses enable you to view

3D images on your 3D TV. The Samsung 3D glasses

communicate with Samsung 3D TVs via the 2.4GHz RF

band.

✎

The Samsung 3D glasses are only compatible with

Samsung D, E, and F series 3D TV's that were

released in 2011, 2012, and 2013. These 3D glasses

cannot be connected to other Bluetooth devices.

Parts

LED Indicator & Power Button

Liquid crystal shutter

Battery Cover

For details on how to attach the glasses' temples and

how to pair the glasses with the TV, refer to the separate

3D glasses manual.

Replacing the Battery

If the red LED blinks every two seconds continually,

replace the battery with a new one.

✎

Insert the "+" side of the battery into the side marked

with "+" in the battery compartment.

✎

To check the remaining battery capacity, refer to the

pairing section in this manual.

Pull the battery

cover downward

Open the battery

cover

Remove the

battery

Replace the battery

Push the battery

cover downward

Close the battery

cover

Pairing 3D Active Glasses

✎

What is Pairing? Pairing is the process of connecting

3D glasses and a 3D TV so that the two devices can

exchange data.

✎

Ensure your Samsung TV and 3D glasses are no

farther than 19.5 in (50 cm) apart from each other

while pairing is in progress.

• Turning the glasses on

Press the power button

brieﬂy. The green LED is

turned on for 3 seconds.

(Make sure that 3D is

activated on the TV before

using the 3D glasses.)

• Turning the glasses off

Press the power button brieﬂy. The red LED is turned

on for 3 seconds.

• Performing the pairing process

Turn the TV on and let it power up completely. Press

and hold the Power button on the glasses. The green

and the red LEDs blink alternately for 2 seconds.

• Operating range

Recommended pairing distance

50 cm

2~6 m

Recommended viewing distance

Recommended viewing distance 2~6m (6.5 to 19.5 ft)

Recommended pairing distance 50 cm or less (19.5 in)

✎

Once the 3D glasses are paired, the remaining

battery capacity is displayed on the TV screen. (This

feature only applies to Samsung F series 3D TVs

and 3D glasses that have been available since 2013.)

✎

If you keep trying to pair the glasses and the TV, the

battery level will decrease significantly. However, the

battery level will recover to a certain degree in about

a minute.

3D Active Glasses

[UF8000-XC]BN68-04794A-05L04.indb 16 2013-10-29  9:41:38

English - 17

English

✎

The working distance depends on the existence

of obstacles (a person, metal, walls, etc.) between

the glasses and the TV and the strength of the

Bluetooth signal.

✎

Turn off the 3D glasses while they are not in use.

If you leave the 3D glasses on, the battery lifespan

decreases.

Pairing steps

1. Turn on the TV, and then move the glasses within

19.5 inches of the TV.

2. Press the power button on the 3D glasses brieﬂy.

The 3D glasses will power on and pairing will start.

3. The message “3D glasses are connected to TV.” will

be displayed on the TV screen when the pairing is

successfully completed.

• If pairing fails, the 3D glasses will power off.

• If the ﬁrst attempt to pair fails, power the TV off

and on again and perform step 2.

• How to pair again: Press the power button on

the 3D glasses for more than 1 second.

Pairing is needed again in the following

situations:

• If the 3D glasses do not function, even when the

power button is pressed, especially with a 3D TV

after a repair.

• If you want to play 3D content on another

Samsung 3D TV model that belongs to the D, E,

or F series released in 2011 through 2013. You

must pair the glasses with the other TV.

Watching 3D Video

Some 3D modes may not be available depending on the

format of the image source.

To watch in 3D, you must wear 3D Active Glasses and

turn the glasses on by pressing the power button.

1. Go to the 3D screen. (Picture > 3D)

2. Select the 3D Mode. The 3D Mode screen appears.

3. Set the 3D Mode of the image you want to view.

Troubleshooting

If you encounter... Try this...

My 3D glasses do not work.

Replace the battery.

The 3D glasses should be close to the TV. Make sure that the distance between the TV and your 3D

glasses is less than 19.5 feet (6m) in a straight line.

Check the 3D function settings of your TV.

The LED keeps blinking The battery is dead. Replace the battery.

Speciﬁcations (Model Number: SSG-5100GB )

Optics

Shutters Liquid crystal Transmittance 36±2%

Recommended

operating distance

2 ~ 6m (6.5 to 19.5 ft) Field Rate 120 ﬁelds/second

Weight Glasses 21.5g/.76 oz. (including the battery: 24.0±0.5g/.85.±.018oz. )

Power Glasses One 3V lithium/manganese dioxide battery 3V(CR2025)

Power consumption

Glasses 0.85mA (Average)

Battery

Type 165mAh, 3.0V (CR2025)

Operating time 150 hours

Operating conditions

Operating temperature 50 °F ~ 104 °F (10°C ~ 40°C)

Custody temperature -4 °F ~ 113 °F (-20°C ~ 45°C)

Product speciﬁcations may be changed without notice in order to enhance product performance.

✎

The continuous operating time may differ depending on the wireless communication environment and usage

conditions.

[ Recommendation ]- EU ONLY

Hereby, Samsung Electronics, declares that this 3D Active Glasses is in compliance with the

essential requirements and other relevant provisions of Directive 1999/5/EC.

This equipment may be operated in all EU countries.

[UF8000-XC]BN68-04794A-05L04.indb 17 2013-10-29  9:41:38

English - 18

What is Remote Support?

Samsung Remote Support service offers you one-on-one support with a Samsung Technician who can remotely.

• Diagnose your TV

• Adjust the TV settings for you

• Perform a factory reset your TV

• Install recommended ﬁrmware updates

How Does it Work?

Having a Samsung Tech remotely service your TV is really pretty simple

1. Call Samsung Contact

Centre and ask for

remote support.

2. Open the menu on your

TV and go to the Support

section.

3. Select Remote

Management and Provide

the Pin# to the agent.

4. The agent will then

access your TV. That's

it!

Assembling the Cable manager

Assembling the Power Cover

[UF8000-XC]BN68-04794A-05L04.indb 18 2013-10-29  9:41:38

English - 19

English

Troubleshooting

If you have any questions about the TV, ﬁrst refer to this list. If none of these troubleshooting tips apply, please visit

“www.samsung.com,” then click on Support, or contact the call centre listed on the back-cover of this manual.

Issues Solutions and Explanations

The TV won’t turn on. • Make sure the AC power cord is securely plugged in to the wall outlet and the TV.

• Make sure the wall outlet is working.

• Try pressing the

P

button on the TV to make sure the problem is not the remote. If the TV turns on,

refer to “Remote control does not work” below.

There is no picture/video. • Check the cable connections. Remove and reconnect all cables connected to the TV and external

devices.

• Set the video outputs of your external devices (Cable/Sat Box, DVD, Blu-ray etc) to match the TV's

input connections. For example, if an external device’s output is HDMI, it should be connected to an

HDMI input on the TV.

• Make sure your connected devices are powered on.

• Be sure to select the correct input source.

• Reboot the connected device by unplugging it, and then reconnecting the device’s power cable.

The remote control does not work. • Replace the remote control batteries. Make sure the batteries are installed with their poles (+/–) in the

correct direction.

• Clean the sensor’s transmission window on the remote.

• Try pointing the remote directly at the TV from 5~6 feet away.

The cable/set top box remote control

doesn’t turn the TV on or off or adjust the

volume.

• Programme the Cable/Set remote control to operate the TV. Refer to the Cable/Set-Top-Box user

manual for the SAMSUNG TV code.

✎

This TFT LED panel uses a panel consisting of sub pixels which require sophisticated technology to produce.

There may be, however, be a few bright or dark pixels on the screen. These pixels will have no impact on the

performance of the product.

✎

To keep your TV in optimum condition, upgrade to the latest firmware on the Samsung web site by USB

(Samsung.com > Support > Downloads).

✎

Some of above pictures and functions are available at specific models only.

Mounting the TV on the Wall Using the Wall Mount Kit

(Optional)

Wall or Ceiling Mounting

If you mount this product on a wall, it should be mounted only as recommended by the

manufacturer. Unless it is correctly mounted, the product may slide or fall, causing serious injury to a

child or adult, and serious damage to the product.

Installing the Wall Mount Kit

The wall mount kit (sold separately) lets you mount the TV on the wall.

For detailed information about installing the wall mount, see the instructions provided with the wall mount. We

recommend you contact a technician for assistance when installing the wall mount bracket. We do not advise you to

do it yourself. Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if

you select to install the wall mount on your own.

[UF8000-XC]BN68-04794A-05L04.indb 19 2013-10-29  9:41:38

English - 20

Preparing before installing Wall-Mount

Case A. Installing the SAMSUNG Wall-Mount Case B. Installing another company’s Wall-Mount

1

15.6 mm

To install a wall-mount, use the Wall mount adapter 1.

Wall Mount Kit Speciﬁcations (VESA)

✎

The wall mount kit is not supplied, but sold separately. Install your wall mount on a solid wall perpendicular to the

floor. When attaching to other building materials, please contact your nearest dealer. If installed on a ceiling or

slanted wall, it may fall and result in severe personal injury.

✎

NOTE

− Standard dimensions for wall mount kits are shown in the table below.

− When purchasing our wall mount kit, a detailed installation manual and all parts necessary for assembly are

provided.

− Do not use screws that do not comply with the VESA standard screw speciﬁcations.

− Do not use screws that are longer than the standard dimension or do not comply with the VESA standard

screw speciﬁcations. Screws that are too long may cause damage to the inside of the TV set.

− For wall mounts that do not comply with the VESA standard screw speciﬁcations, the length of the screws may

differ depending on the wall mount speciﬁcations.

− Do not fasten the screws that are too strongly; this may damage the product or cause the product to fall,

leading to personal injury. Samsung is not liable for these kinds of accidents.

− Samsung is not liable for product damage or personal injury when a non-VESA or non-speciﬁed wall mount is

used or the consumer fails to follow the product installation instructions.

− Do not mount the TV at more than a 15 degree tilt.

Product

Family

Inch VESA Spec.(A * B) Standard Screw Quantity

LED-TV

40 - 46 200 X 200

M8 4

55 - 75 400 X 400

Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury due to

electric shock.

[UF8000-XC]BN68-04794A-05L04.indb 20 2013-10-29  9:41:39

La page charge ...

Samsung UE65F8000SL Guide de démarrage rapide

Ce manuel convient également à

Samsung UE65F8000SL Guide de démarrage rapide

dans d''autres langues

Documents connexes