Hand Held Products HandHeld 3800 Linear Series Guide de démarrage rapide

Marque: Hand Held Products

Modèle: HandHeld 3800 Linear Series

Taper: Guide de démarrage rapide

Hand Held Linear Imager

Manuel De Programmation Simplifie

Kurz–Programmiermenü

Quick Start Guide

The vision to capture it all

Manuale Sintetico Di Programmazione

Guia Rápida de Configuración

(For use with IT3800LR–12L only)

(Pour l’utilisation de l’IT3800LR–12L uniquement)

(Nur für die Benutzung mit IT3800LR–12L)

(Solo per il modello IT3800LR–12L)

(Para la utilización del IT3800LR–12L unicamente)

IMAGETEAM 3800 Quick Start Guide

Connect the Scanner

Turn power off before connecting the scanner.

PC Interface

AT/PS–2

(Default)

PS–2

Japan DOS/V

Japan NEC 98XX

IMAGETEAM 3800 Quick Start Guide

Country

U.S.A.

(Default)

Great Britain

Germany

France

Italy

Spain

Carriage Return

Remove CR, LF Suffix

Add CR, LF Suffix

IMAGETEAM 3800 Quick Start Guide

Trigger

Manual Trigger

(Default)

Automatic Trigger

Factory Default

Agency Compliance Statements

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may

not cause harmful interference, and (2) this device must accept any interference received, including interference that may

cause undesired operation.

FCC Class B Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the

FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee

that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that

to which the receiver is connected.

• Consult the dealer or an experienced radio or television technician

for help.

Caution: Any changes or modifications made to this device that are not expressly approved by Welch Allyn Data

Collection, Inc. may void the user’s authority to operate the equipment.

Note: To maintain compliance with FCC Rules and Regulations, cables connected to this device must be shielded cables, in

which the cable shield wire(s) have been grounded (tied) to the connector shell.

Canadian Notice

This equipment does not exceed the Class B limits for radio noise emissions as described in the Radio Interference

Regulations of the Canadian Department of Communications.

Le present appareil numerique n’emet pas de bruits radioelectriques depassant les limites applicables aux appareils

numeriques de la classe B prescrites dans le Reglement sur le brouillage radioelectrique edicte par le ministere des

Communications du Canada.

IMAGETEAM 3800 Quick Start Guide

The CE mark on the product indicates that the system has been tested to and conforms with the provisions noted

within the 89/336/EEC Electromagnetic Compatibility Directive and the 73/23/EEC Low Voltage Directive.

For additional information, please contact:: European/UK Office – Welch Allyn UK. Ltd.

Dallam Court, Dallam Lane

Warrington

Chesire WA2 7LT

United Kingdom

Tel: Int +44 (0) 1 925 2400055 or Int+353 1 216 0070

Fax: Int+44 (0) 1 925 631280 or Int+353 1 295 6353

Welch Allyn shall not be liable for use of our product with equipment (i.e., power supplies, personal computers, etc.) that is

not CE marked and does not comply with the Low Voltage Directive.

UL and cUL Statement: UL listed UL1950 and CSA 22.2 No.950. cUL listed UL1950 and CSA 22.2 No

950.

LED Safety Statement: This device has been tested in accordance with EN60825–1 LED safety, and has

been certified to be under the limits of a Class 1 LED device.

TÜV Statement: TÜV or GS marked to EN60950 and EN60825–1.

C-TIC Statement: Conforms to AS/NZS 3548.

Limited Warranty

Welch Allyn Data Collection, Inc., hereby warrants its products to be functional and free from manufacturing defects at the

time of delivery. Welch Allyn Data Collection, Inc. further warrants that it will replace or repair, at its option, any unit that fails

to perform according to Welch Allyn’s published specifications during a period of three (3) years from the time of shipment by

Welch Allyn Data Collection, Inc. to the user at the time it is purchased from any of Welch Allyn Data Collection Inc.’s

Authorized Distributors. Any attempt on the part of the user to disassemble or service the equipment shall void the warranty.

The warranty does not apply to product which have been damaged by improper handling, shipping, or misuse. The warranty

does not apply, if, in the sole opinion of Welch Allyn Data Collection, Inc., the unit has been damaged by accident, misuse,

neglect, improper shipping and handling. Since the unit is sensitive to static, the responsibility to protect it from static damage

is solely that of the user. The warranty is valid only if the unit or scanner has not been tampered with or serviced by any party

unauthorized by Welch Allyn Data Collection, Inc. as a repair facility.

THE WARRANTIES SET FORTH HEREIN ARE IN LIEU OF ANY AND ALL OTHER WARRANTIES EXPRESSED OR

IMPLIED INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE

BUYER ACKNOWLEDGES THAT NO OTHER REPRESENTATIONS WERE MADE OR RELIED UPON WITH RESPECT TO

THE QUALITY AND FUNCTION OF THE BOARD AND SCANNER HEREIN SOLD.

In no event shall Welch Allyn Data Collection, Inc. or its resellers be liable for any loss, inconvenience or damage whether

direct, incidental, consequential or otherwise, and whether caused by negligence or other fault resulting from the breach of

any express warranty except as set forth herein. Some states do not allow the exclusion or limitation of incidental or

consequential damages, so the above limitations or exclusions may not apply to you.

This warranty gives you specific legal rights and you may also have other rights which vary from state to state or country to

country.

Disclaimer

Welch Allyn Data Collection, Inc. reserves the right to make changes in specifications and other information contained in this

document without prior notice, and the reader should in all cases consult Welch Allyn to determine whether any such changes

have been made. The information in this publication does not represent a commitment on the part of Welch Allyn.

Welch Allyn Data Collection, Inc. shall not be liable for technical or editorial errors or omissions contained herein; nor for

incidental or consequential damages resulting from the furnishing, performance, or use of this material.

This document contains proprietary information which is protected by copyright. All rights are reserved. No part of this

document may be photocopied, reproduced, or translated into another language without the prior written consent of Welch

Allyn Data Collection, Incorporated.

Welch Allyn Data Collection, Inc. Web Address: http://dcd.welchallyn.com

Manuel de Programmation Simplifie

Français

Mise en service du Lecteur

A. Eteindre le PC avant connexion.

B. Connecter le câble approprié.

C. Rallumer l’ordinateur.

D. Lire le code barres correspondant à l’interface.

E. Lire le code Pays.

Configuration PC

AT/PS–2

(Défaut)

PS–2

Manuel de Programmation Simplifie

Pays

France

Retour charriot

Supprimer CR, Suffix LF

Ajouter CR, LF Suffix

Gachette

Gachette Manuelle

(Défaut)

Gachette Automatique

Retour défaut

Description des valeurs par défaut

Manuel de Programmation Simplifie

Normes de conformité

Communauté européenne - Label CE

Le label CE figurant sur les produits, indique que l’équipement a été testé et déclaré conforme aux exigences de la directive

européenne 89/336/EEC ainsi que la directive européenne 73/23/EEC, relative aux normes de voltages de faible intensité.

Pour davantage d’informations, contacter: European/UK Office – Welch Allyn UK. Ltd.

Dallam Court, Dallam Lane

Warrington

Chesire WA2 7LT

Grande–Bretagne

Tel: Int +44 (0) 1 925 240055 or Int+353 1 216 0070

Fax: Int+44 (0) 1 925 631280 or Int+353 1 295 6353

Welch Allyn ne sera pas rendue responsable de l’utilisation des produits avec tout materiel (i.e power supply, ordinateur

personnel, etc.) qui ne comporterait pas le label CE et ne serait pas conforme à la directive sur le voltage de faible intensité.

Dispositions UL et cUL: Conformite aux normes de securite LED: Cet équipement a été testé conformément

aux normes de sécurité EN60825–1 securite LED, et a été certifié être en dessous de la limite pour des équipements à LED

de classe 1.

Instructions de sécurité DEL (diode éléctroluminescente): Cet équipement a été testé en

conformité avec EN60825–1 norme DEL de sécurité, et a été reconnu comme étant en dessous des limites pour des

équipements à diode éléctroluminescente de Classe 1.

Disposition TÜV: TÜV or GS marked to EN60950 and EN60825–1.

c-Disposition TIC: Conforms to AS/NZS 3548.

Clause limitative de garantie

Welch Allyn garantit ses produits opérationnels et exempts de tout défaut de fabrication dés la livraison.

Welch Allyn garantit de plus la réparation ou le remplacement de tout élément défaillant, conformément aux spécifications,

durant une période de 3 ans à compter du transport vers l’utilisateur, jusqu’au moment de la livraison, et ce, par tout

distributeur agréé Welch Allyn. Toute tentative de réparation par l’utilisateur lui–même, excluerait la garantie.

Cette garantie ne s’applique pas non plus aux produits endommagés suite à de mauvaises manipulations, transports ou

usages abusifs.

La garantie ne s’applique pas si selon Welch Allyn, le produit a été endommagé par transports, manipulations, accidents,

négligence.

Du fait de la sensibilité à l’éléctricité statique, la responsabilité d’assurer la protection contre tout dommage, incombe à

l’utilisateur.

La garantie n’est pas valable si le produit a été démonté par un réparateur non agréé par Welch Allyn.

Cet engagement est le seul reconnu, toute autre garantie, même du vendeur sera exclue.Welch Allyn se dégage de toute

responsabilité en cas de perte ou dommage direct ou accidentel qui résulterait d’une négligence ou qui sortirait des limites de

garantie.

Cette garantie donne un droit spécial et peut s’ajouter aux droits communs selon les pays.

Clause Limitative de Responsabilité

Welch Allyn se réserve le droit d’apporter des modifications aux stipulations contenues dans ce document sans avis

préalable. L’utilisateur devrait dans tous les cas contacter Welch Allyn pour prendre connaissance de tout changement

éffectué.

Les informations contenues dans ce document, ne representent pas un engagement de la part de Welch Allyn, Inc..

Welch Allyn ne sera pas rendue responsable des erreurs techniques, erreurs d’impression ou d’éventuelles

omissions au sein de ce document, ni des dégâts résultants du fonctionnement, du déplacement ou de l’utilisation

de ce matériel.

document ne peut être copié, reproduit ou traduit dans une autre langue sans l’accord préalable écrit de Welch Allyn, Inc.

2000 Welch Allyn, Inc. Tout Droits Réservés.

Welch Allyn Data Collection, Inc. Web Address: http://dcd.welchallyn.com

Manuel de Programmation Simplifie

Kurz–Programmiermenü

Deutsch

Anschließen des Scanners

Bitte Terminal abschalten bevor der Scanner angeschlossen wird.

Schnellprogrammierung IBM PC

AT/PS–2

(Werkseinstellung)

PS–2

Kurz–Programmiermenü

Ländercode

Deutschland, Österreich

Wagenrücklauf

Wagenrücklauf löschen

Wagenrücklauf hinzufügen

Drücker-Einstellung

Handschaltung

(Werkseinstellung)

Auto-Schaltung

Zurück auf Werkseinstellung

Werkseinstellung

Kurz–Programmiermenü

Agentur-Richtlinien

Dieses Produkt entspricht den Anforderungen des CE–Zeichens, gemäß den Richtlinien 89/336/EEC

Electromagnetic Compatibility Directive und der Niederspannungsrichtlinie 73/23/EEC (EWG).

Für weitere Informationen wenden Sie sich bitte an:

Welch Allyn Ltd.

Dallam Court, Dallam Lane

Warrington

Chesire WA2 7LT

United Kingdom

Tel: Int +44 (0) 1 925 240055 or Int+353 1 216 0070

Fax: Int+44 (0) 1 925 631280 or Int+353 1 295 6353

Die Firma Welch Allyn ist für Schäden, die durch die Verwendung ihrer Scanner in Verbindung mit

anderen nicht CE konformen Geräten entstehen, nicht haftbar zu machen.

UL und cULErklärung: UL markiert als UL1950 und CSA 22.2 Nr. 950. cUL markiert als UL1950 und CSA

22.2 Nr. 950.

LED Sicherheitserklärung: Dieses Gerät entspricht EN60825–1 der LED Sicherheitsverordung. Ferner wird

bestätigt, daß das Gerät unter der Grenze der Klasse I für LED–Anzeigen liegt.

TÜV Erklärung: TÜV oder GS markiert als EN60950 und EN60825–1.

C-TIC Erklärung Entspricht den Anforderungen AS/NZS 3548.

Garantieleistungen

Welch Allyn, Inc., garantiert hiermit, daß seine Produkte zum Zeitpunkt der Auslieferung funktionsfähig und ohne

Herstellungsmängel sind. Ferner garantiert Welch Allyn den Ersatz oder Reparatur von Geräten der Serie

IT3800, die den von Welch Allyn publizierten Spezifikationen nicht entsprechen, innerhalb von zwei (3) Jahren vom Zeitpunkt

der Auslieferung bei Welch Allyn bzw. des Erwerbs bei einem autorisierten Welch Allyn Distributor an.

Jeder Versuch des Anwenders, den Scanner zu öffnen oder selbst zu reparieren, führt zum Verlust der Garantie.

Die Garantie ist ungültig bei Schäden, die durch unsachgemäße Behandlung, Transport oder falsche Anwendung entstehen.

Die Garantie gilt ebenso nicht bei Änderungs– oder Reparaturversuchen von nicht durch Welch Allyn autorisierten Dritten.

Der Anwender ist alleine für den Schutz des Scanners gegen schädliche statische Aufladungen verantwortlich.

DIE HIERMIT ANGEGEBENEN GARANTIEN ERSETZEN JEGLICHE ANDERE GARANTIEN; EINSCHLIEßLICH

VERKAUFS– UND FUNKTIONSGARANTIEN. DER KÄUFER ERKENNT KEINE ANDEREN ANGABEN ZUR QUALITÄT

UND FUNKTIONALITÄT DES HIERMIT VERKAUFTEN PRODUKTS AN.

In keinem Fall haftet Welch Allyn oder deren Händler für einen Verlust oder Unannehmlichkeiten, sollten sie direkt, zufällig,

konsequent oder anderweitig bzw. durch Unachtsamkeit oder andere Fehler, durch Nichterfüllung anderer als der hierin

aufgeführten Garantien entstehen.

Erklärung

Welch Allyn



behält sich das Recht der Änderung technischer Parameter oder anderer in dieser Dokumentation enthaltener

Informationen vor, ohne besonders darauf hinzuweisen. In jedem Falle sollte der Leser sich über Änderungen bei Welch Allyn

erkundigen.

Die Informationen in dieser Dokumentation stellen keine Verpflichtung der Firma Welch Allyn dar.

Welch Allyn ist für hierin enthaltene technische oder Druckfehler nicht haftbar zu machen; auch nicht für zufällige oder

systematische Zerstörungen, die aus der Nutzung dieses Materials oder der Geräte selbst resultieren.

Dieses Dokument enthält Informationen, die durch Copyright geschützt sind. Alle Rechte sind vorbehalten. Diese

Dokumentation darf ohne die schriftliche Zustimmung von Welch Allyn, Incorporated, auch teilweise nicht kopiert, vervielfältigt

oder übersetzt werden.

Welch Allyn Data Collection, Inc. Web Address: http://dcd.welchallyn.com

Kurz–Programmiermenü

Manuale Sintetico Di Programmazione

Italiano

Collegamento dello Scanner

Spegnere prima di collegare lo scanner.

Interfaccia PC

AT/PS–2

(default)

PS–2

Manuale Sintetico Di Programmazione

Nazioni

Italy

Ritorno Carrello (CR)

Toglie CR, suffisso LF

Aggiunge CR, suffisso LF

Pulsante

Funzione manuale

(Default)

Funzione automatica

Configurazione di fabbrica

Manuale Sintetico Di Programmazione

Marchio CE

Il marchio CE posto sul prodotto indica che il sistema è stato certificato e dichiarato conforme alla Direttiva Europea sulla

Compatibilità Elettromagnetica 89/336/EEC ed alla Direttiva Europea 72/23/EEC per il Basso Voltaggio.

Per ulteriori informazioni, prego prendere contatto con:

Welch Allyn Ltd. Welch Allyn Italia s.r.l.

Dallam Court, Dallam Lane oppure Via Napo Torriani, 29

Warrington 20124 Milano – Italia

Chesire WA2 7LT

Inghiterra

Tel: Int +44 (0) 1 925 240055 or Int+353 1 216 0070 Int+39 026 6992937

Fax: Int+44 (0) 1 925 631280 or Int+353 1 295 6353 Int+39 02 66713599

Welch Allyn non sarà responsabile per l’utilizzo del prodotto collegato ad apparecchiature (alimentatore, personal computer,

etc.) senza il marchio CE e che non siano conformi alla Direttiva per il Basso Voltaggio.

Dichiarazione UL e cUL: UL listed UL 1950 e CSA 22.2 No. 950.cUL listed Ul 1950 e CSA 22.2 No. 950.

Dichiarazione di Sicurezza LED: Questo apparecchio è stato verificato in conformità alla direttiva di

sicurezza EN60825 – 1 LED ed è stato certificato essere al di sotto dei limiti di un dispositivo di classe 1 LED.

TÜV: marcatura TÜV o GS per EN60950 e EN60825–1

Dichiarazione C - TIC: conforme ad AS/NZS 3548

Garanzia Limitata

Welch Allyn, Inc. garantisce con la presente che i suoi prodotti siano funzionanti e senza difetti di produzione all’atto della

consegna. Impegnandosi inoltre di rimuovere gli eventuali vizi o difetti mediante riparazione o, a propria discrezione,

mediante rimpiazzo degli elementi difettosi che non saranno conformi alle specifiche tecniche, pubblicate da Welch Allyn.

Tale garanzia avrà luogo nel periodo di 3 (tre) anni decorsi dalla spedizione dalla Welch Allyn all’utente, in particolare, dal

momento in cui il prodotto fu acquistato da un qualsiasi distributore autorizzato Welch Allyn. Qualsiasi tentativo da parte

dell’utente di smontare o riparare il prodotto, annullerà questa garanzia.

La garanzia non è applicabile a prodotti che siano stati danneggiati da errati spostamenti o spedizioni, o da uso improprio. La

garanzia non sarà applicata qualora, a giudizio esclusivo della Welch Allyn, l’unità sia stata danneggiata da incidente, abuso,

incuria, spedizione o spostamenti impropri. Poiché l’unità è sensibile alle scariche elettromagnetiche, l’onere della protezione

del prodotto contro le scariche elettromagnetiche è a totale carico dell’utente. La garanzia sarà valida solo se l’unità non sarà

stata manomessa o riparata da qualsiasi centro non autorizzato dalla Welch Allyn.

LA PRESENTE GARANZIA SOSTITUISCE QUALSIASI ALTRA GARANZIA ESPRESSA O LASCIATA AD INTENDERE,

INCLUDENDO QUELLA DI VENDITA E ADEGUAMENTO A QUALSIASI PARTICOLARE REQUISITO.

L’ACQUIRENTE RICONOSCE CHE NON CI SIANO STATE ALTRE DEFINIZIONI, FATTE O LASCIATE AD INTENDERE,

INERENTI LA QUALITÀ E LE FUNZIONI DELLA SCHEDA ELETTRONICA E DELLO SCANNER VENDUTI.

In nessun caso Welch Allyn o i suoi rivenditori saranno ritenuti responsabili di qualsiasi perdita, inconveniente o danno, sia

diretto o indiretto, incidentale, consequenziale o altro, e qualora causato da negligenza o da qualsiasi dolo che ne risulti dalla

violazione della presente garanzia.

Questa garanzia vi dà dei diritti legali specifici che vanno uniti a quelli propri della vostra nazione d’appartenenza.

Clausola Limitativa Di Responsabilità

Welch Allyn si riserva il diritto di modificare le informazioni e le specifiche contenute in questo documento senza alcun

preavviso: in ogni caso sarà cura dell’utente verificare con Welch Allyn, se sono state apportate modifiche rilevanti.

Welch Allyn non si assume alcuna responsabilità per omissioni o errori tecnici o di stampa contenuti in questo manuale, né

per danni derivanti da un errato utilizzo del materiale.

Le informazioni contenute in questa pubblicazione non costituiscono alcun impegno da parte della Welch Allyn.

Questo documento contiene informazioni protette da copyright. Tutti i diritti sono riservati. È vietata la riproduzione di

qualsiasi parte di questo manuale o la traduzione in altra lingua senza l’esplicito consenso scritto della Welch Allyn, Inc.

E2000 Welch Allyn Inc. – Tutti i diritti sono riservati.

Welch Allyn Data Collection, Inc. – Indirizzo Web: http://dcd.welchallyn.com

Manuale Sintetico Di Programmazione

Guia Rápida de Configuración

Español

Connexión del Escáner

Desconecte la corriente eléctrica antes de conectar el escáner.

Interfaz de PC

AT/PS–2

(Por Defecto)

PS–2

Guia Rápida de Configuración

País

España

Retorno de Carro

Quitar el sufijo CR LF

Añadir el sufijo CR LF

Gatillo

Gatillo Manual

(Por Defecto)

Gatillo Automático

Parámetros por defecto

La page est en cours de chargement...

Hand Held Products HandHeld 3800 Linear Series Guide de démarrage rapide

Marque: Hand Held Products

Modèle: HandHeld 3800 Linear Series

Taper: Guide de démarrage rapide

Télécharger le PDF

rapport

Hand Held Products HandHeld 3800 Linear Series Guide de démarrage rapide

Hand Held Products HandHeld 3800 Linear Series Guide de démarrage rapide

dans d''autres langues

Autres documents