Rockford Fosgate TMS65 Installation & Operation Manual

Taper
Installation & Operation Manual
2014 & UP HARLEY-DAVIDSON
®
SPEAKERS
Installation & Operation
Serial Number: Date of Purchase:
TMS65
2
Dear Customer,
Congratulations on your purchase of the world’s finest brand of audio
products. At Rockford Fosgate we are fanatics about musical reproduc-
tion at its best, and we are pleased you chose our product. Through
years of engineering expertise, hand craftsmanship and critical testing
procedures, we have created a wide range of products that reproduce
music with all the clarity and richness you deserve.
For maximum performance we recommend you have your new Rockford
Fosgate product installed by an Authorized Rockford Fosgate Dealer,
as we provide specialized training through Rockford Technical Training
Institute (RTTI). Please read your warranty and retain your receipt and
original carton for possible future use.
Great product and competent installations are only a piece of the puzzle
when it comes to your system. Make sure that your installer is using
100% authentic installation accessories from Rockford Fosgate in your
installation. Rockford Fosgate has everything from RCA cables and
speaker wire to power wire and battery connectors. Insist on it! After all,
your new system deserves nothing but the best.
To add the finishing touch to your new Rockford Fosgate image, order
your Rockford accessories, which include everything from T-shirts to
hats.
Visit our web site for the latest information on all Rockford products;
www.rockfordfosgate.com
or, in the U.S. call 1-800-669-9899 or FAX 1-800-398-3985. For all other
countries, call +001-480-967-3565 or FAX +001-480-966-3983.
Table of Contents
If, after reading your manual, you still have questions regarding this prod-
uct, we recommend that you see your Rockford Fosgate dealer. If you need
further assistance, you can call us direct at 1-800-669-9899. Be sure to
have your serial number, model number and date of purchase available
when you call.
Safety
This symbol with “WARNING” is intended
to alert the user to the presence of important
instructions. Failure to heed the instructions
will result in severe injury or death.
This symbol with “CAUTION” is intended to
alert the user to the presence of important
instructions. Failure to heed the instructions
can result in injury or unit damage.
To prevent injury and damage to the unit,
please read and follow the instructions in this manual. We want you to
enjoy this system, not get a headache.
If you feel unsure about installing this system yourself, have it installed
by a qualified Rockford Fosgate technician.
Before installation, disconnect the battery negative (-) terminal to
prevent damage to the unit, fire and/or possible injury.
Introduction
©2016 Rockford Corporation. All Rights Reserved. ROCKFORD FOSGATE and associated logos where applicable are registered trademarks of Rockford
Corporation in the United States and/or other countries. Ultra Classic
®
, Electra Glide
®
, Street Glide
®
, Tri Glide
®
, Road Glide
®
, Road Glide Ultra
®
, CVO
TM
and
Harley-Davidson
®
are registered trademarks of Harley-Davidson, Inc, and if used or implied are for reference only. There is no affiliation between Harley-
Davidson, Inc., and Rockford Corporation. All other trademarks are the property of their respective owners. Specifications subject to change without notice.
2 Introduction
3-6 Specifications
7 Installation Considerations
8-11 Installation
12 Français
13 Español
14 Deutsch
15 Italiano
16 Warranty
PRACTICE SAFE SOUND
Continuous exposure to sound pressure levels over 100dB may cause
permanent hearing loss. High powered auto sound systems may
produce sound pressure levels well over 130dB. Use common sense
and practice safe sound.
PRATIQUEZ UNE ÉCOUTE SANS RISQUES
Une exposition continue à des niveaux de pression acoustique upérieurs à
100 dB peut causer une perte d’acuité auditive permanente. Les systèmes
audio de forte puissance pour auto peuvent produire des niveaux de
pression acoustique bien au-delà de 130 dB. Faites preuve de bon sens et
pratiquez une écoute sans risques
PRACTIQUE EL SONIDO SEGURO
El contacto continuo con niveles de presión de sonido superiores a 100
dB puede causar la pérdida permanente de la audición. Los sistemas de
sonido de alta potencia para automóviles pueden producir niveles de
presión de sonido superiores a los 130 dB. Aplique el sentido común y
practique el sonido seguro.
PRAKTIZIEREN SIE SICHEREN SOUND
Fortgesetzte Geräuschdruckpegel von über 100 dB können beim
Menschen zu permanentem Hörverlust führen. Leistungsstarke
Autosoundsysteme können Geräuschdruckpegel erzeugen, die weit über
130 dB liegen. Bitte wenden Sie gesunden Menschenverstand an und
praktizieren Sie sicheren Sound.
OSSERVATE LE REGOLE DEL SUONO SENZA PERICOLI
La costante esposizione a livelli di pressione acustica al di sopra dei
100dB possono causare la perdita permanente dell’udito. I sistemi
audio ad alta potenza possono produrre livelli di pressione acustica ben
superiori ai 130dB. Si consiglia il buon senso e l’osservanza delle regole
del suono senza pericoli
3
Specications
Model TMS65
Nominal Diameter - inch
(mm)
6.5
(165)
Description 2-W
ay
Nominal Impedance (Ohms)
Frequency Response (Hz)
65-20kHz
Voice Coil Diameter - inch
(mm)
1.4
(35.6)
Power Handling - Watts
(RMS/Peak)
75/150
Fs - Free Air Resonance (Hz) 86.5
Qts 0.52
Vas - cu. ft.
(Liter)
0.198
(5.6)
Sensitivity (1W/1M) 91dB
Sensitivity (2.83V/1M) 94dB
Xmax - inch
(mm)
0.19
(3.0)
Mounting Diameter
5.0
(128)
Mounting Depth
2.1
(53)
Grille/Trim Ring YES
See page 4-6 for additional dimensions
CEA 2031
Power handling on Rockford Fosgate speakers conform to CEA-2031 industry standards. This means your speaker has the capacity to
handle power under continuous demand, not instantaneous power handling that over time can damage voice coils.
VERIFIED WITH KLIPPEL
To adorn the ‘Verified with Klippel’ mark, the qualifying company’s loudspeaker engineering personnel must be trained and certified by
Klippel prior to using the three separate Klippel systems to design, develop and test. Rockford Fosgate has made the investment in Klippel to
deliver the best possible speakers and subwoofers to their customers.
4
Specications
illus.-1.1
TMS65
2.3”
(59mm)
2.6”
(67mm)
5.6” Dia.
(142mm)
2014 & Up Street Guide
®
Grilles Included 2015 & Up Road Glide
®
Grilles Included
2014 & Up Tour Pak Grilles Included
6.2” Dia.
(157mm)
45°
90°
5
Contents
Installation Tools
The following is a list of suggested tools needed for installation:
Plastic Trim Panel Pry Tool
Allen Wrench - 3/16”, 5/32”
Torx - T10, T25, T27
(1) Pair of 2-Way Speakers
(1) Pair of 2015 & Up Road
Glide Grilles
(1) Pair of 2014 & Up Street
Glide Grilles
(1) Pair of 2014 & Up Tour-Pak
Grilles
Installation & Operation Manual
Installation
Installation Considerations
This section focuses on some considerations for installing your motorcycle
replacement speakers. This manual will illustrate the installation of two
different fairing styles and Tour-Pak offered by Harley-Davidson
®
from
the production years ranging from 2014 and Up. (Ultra Classic
®
, Electra
Glide
®
, Street Glide
®
, Tri Glide
®
, Road Glide
®
and Road Glide Ultra
®
.)
If you feel unsure about installing this system yourself, have it installed by
a qualified technician.
Before installation, disconnect the battery
negative (-) terminal to prevent damage to the
unit, fire and/or possible injury.
Before beginning any installation, follow these
simple rules:
Be sure to carefully read and understand the instructions before
attempting to install these motorcycle speakers.
Consult your motorcycle’s service manual for model specific
information. Models may differ from year to year depending on factory
options and aftermarket accessories added.
• These motorcycle speakers are a complete replacement to the factory
(OEM) speaker setup.
With the addition of an amplifier, be sure that your current charging
system is in proper working order.
• Utilize a blanket or fender cover to protect the front fender from tools
or any other item that may be accidentally be dropped while removing
the fairing.
• Visit rockfordfosgate.com for more comprehensive installation
videos and product information.
6
You will need to disconnect the harness from the headlight to
completely take the fairing off of the motorcycle.
Step 2 - Speaker & Pod Removal
After the fairing is removed, this will provide access for the speaker
pods that need to be removed so the speakers can be replaced.
There are several wire connectors that are attached to the speaker
pods and surrounding components that will need to be removed
prior to unbolting allowing access to the bolts holding the pods in
place.
Installation
Front Speakers for Ultra Classic
®
, Electra Glide
®
,
Street Glide
®
and Tri Glide
®
models.
Step 1 - Fairing Removal
To begin with, remove the top screws below the windshield to
remove the windshield.
Once you have the windshield set aside, remove the remaining
screws on the inside of the fairing.
This will allow you to remove the front fairing.
7
Installation
Remove the top two bolts with a allen head screwdriver or ratchet.
After the top two bolts are removed, remove the three bolts that are
under the radio area.
If your bike is equipped with the optional communication setup,
you will need to remove the module to access mounting bolts.
Unplug the module and set it aside.
Next, remove the last three screws that hold the pod to the fairing.
Remove the fairing and set aside for the speaker removal.
8
Installation
Using a screwdriver, remove the speaker grille that is attached to
the fairing.
With the pod on a bench, unscrew the mounting screws to remove
the factory speaker from the factory pod.
Unplug the terminals to disconnect the speaker.
Step 3 - Speaker Installation
Prior to installing the speaker to the pod, there are alignment pins
on the pod that the speaker needs to line up to ensure proper fit.
Take the new Rockford speaker and slide the wire connectors over
the terminals.
NOTE: The smaller terminal is the positive (+) and the larger
terminal is the negative (-).
Secure the speaker to the factory pod using the factory hardware.
NOTE: Do not overtighten the mounting screws. Doing so can strip
the threads on the plastic pod.
9
Installation
Attach the new Rockford grille to the inside of the fairing.
NOTE: The speaker grilles are side specific and have a notch in one
of the mounting holes as an indicator. The notch is faced towards
the middle of the bike.
Reattach the pod with the factory hardware and reinstall any wire
harnesses that were removed for the pod removal.
Install the outer fairing to the motorcycle after speaker pods and
wiring is secured.
Front Speakers for Road Glide
®
and Road Glide
Ultra
®
models.
Step 1 - Speaker & Grille Removal
Remove the factory speaker grille with a plastic pry tool or small
hook tool.
NOTE: Pull or pry on the portion of the grille that is closer to the
inside of the bike.
Remove the mounting screws holding the speaker in place.
10
Unplug the terminals to disconnect the speaker.
Step 2 - Speaker & Grille Installation
Take the new Rockford speaker and slide the wire connectors over
the terminals.
NOTE: The smaller terminal is the positive (+) and the larger
terminal is the negative (-).
Prior to installing the speaker to the pod, there are alignment pins
on the pod that the speaker needs to line up to ensure proper fit.
Secure the speaker to the pod using the factory hardware.
NOTE: Do not overtighten screws. Doing so can strip the threads
on the plastic pod.
Once the speaker is secured, press the new grille into place.
Installation
11
Installation
Rear Speakers for Tour-Pak models.
Step 1 - Rear Speaker Removal
Unscrew the speaker grilles from the rear pods and remove factory
speaker.
Unplug the terminals to disconnect the speaker.
Step 2 - Rear Speaker Installation
Before connecting the speaker wires, place the grille trim ring
behind the speaker.
Connect the speakers by sliding the speaker wire connector over
the speaker terminals
NOTE: The smaller terminal is the positive (+) and the larger
terminal is the negative (-).
Insert the new Rockford speaker into the speaker pod and secure
with mounting screws.
Place the grille over the speaker and press into place.
Rockford Corporation offers a limited warranty on Rockford Fosgate products on the following terms:
Length of Warranty
POWER Amplifiers – 2 Years
BMW® Direct Fit Speakers – 2 Y
ears
Source Units – 1 Year
All other products – 1 Year
Any Factory Refurbished Product – 90 days (receipt required)
What is Covered
This warranty applies only to Rockford Fosgate products sold to consumers by Authorized Rockford Fosgate Dealers in the United States of America or
its possessions. Product purchased by consumers from an Authorized Rockford Fosgate Dealer in another countr
y are covered only by that country’s
Distributor and not by Rockford Corporation.
Who is Covered
This warranty covers only the original purchaser of Rockford product purchased from an Authorized Rockford Fosgate Dealer in the United States. In order
to receive ser
vice, the purchaser must provide Rockford with a copy of the receipt stating the customer name, dealer name, product purchased and date of
purchase.
Products found to be defective during the warranty period will be repaired or replaced (with a product deemed to be equivalent) at Rockford’s discretion.
What is Not Covered
1. Damage caused by accident, abuse, improper operations,water, theft, shipping.
2.
Any cost or expense related to the removal or reinstallation of product.
3. Service performed by anyone other than Rockford or an Authorized Rockford Fosgate Service Center.
4. Any product which has had the serial number defaced, altered, or removed.
5. Subsequent damage to other components.
6. Any product purchased outside the U.S.
7. Any product not purchased from an Authorized Rockford Fosgate Dealer.
Limit on Implied Warranties
Any implied warranties including warranties of fitness for use and merchantability are limited in duration to the period of the express warranty set forth
above. Some states do not allow limitations on the length of an implied warranty
, so this limitation may not apply. No person is authorized to assume for
Rockford Fosgate any other liability in connection with the sale of the product.
How to Obtain Service
Contact the Authorized Rockford Fosgate Dealer you purchased this product from. If you need further assistance, call 1-800-669-9899 for Rockford
Customer Ser
vice. You must obtain an RA# (Return Authorization number) to return any product to Rockford Fosgate. You are responsible for shipment of
product to Rockford.
EU Warranty
This product meets the current EU warranty requirements, see your Authorized dealer for details.
Warranty
Installation assistance availible at:
www.rockfordfosgate.com/rftech
ROCKFORDFOSGATE.COM
600 South Rockford Drive • Tempe, Arizona 85281 United States
Direct: (480) 967-3565 • Toll Free: (800) 669-9899
Printe
d
in C
h
in
a
05
1
8
1
6
12
30
-
608
2
3
-
0
1-A
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13

Rockford Fosgate TMS65 Installation & Operation Manual

Taper
Installation & Operation Manual

dans d''autres langues