Sony CDX-GT530UI Le manuel du propriétaire

Operating Instructions

Bedienungsanleitung

Mode d’emploi

Istruzioni per l’uso

Gebruiksaanwijzing

DE

GB

4-109-737-21 (1)

CDX-GT530UI

FR

IT

NL

To cancel the demonstration (DEMO) display, see page 6.

Zum Deaktivieren der Demo-Anzeige (DEMO) schlagen Sie bitte auf Seite 6 nach.

Pour annuler la demonstration (DEMO), reportez-vous a la page 6.

Per annullare la dimostrazione (DEMO), vedere pagina 6.

Om de demonstratie (DEMO) te annuleren, zie pagina 6.

FM/MW/LW Compact Disc Player

FM/MW/LW

Compact Disc Player

2

ZAPPIN is a trademark of Sony Corporation.

iPod is a trademark of Apple Inc., registered in

the U.S. and other countries.

iPhone is a trademark of Apple Inc.

For installation and connections, see the

supplied installation/connections manual.

This label is located on the bottom of the

chassis.

Notice for customers: the following

information is only applicable to

equipment sold in countries applying

EU Directives

The manufacturer of this product is Sony

Corporation, 1-7-1 Konan, Minato-ku, Tokyo,

Japan. The Authorized Representative for EMC

and product safety is Sony Deutschland GmbH,

Hedelfinger Strasse 61, 70327 Stuttgart,

Germany. For any service or guarantee matters

please refer to the addresses given in separate

service or guarantee documents.

Disposal of Old Electrical &

Electronic Equipment (Applicable in

the European Union and other

European countries with separate

collection systems)

This symbol on the product or on its

packaging indicates that this product shall not be treated

as household waste. Instead it shall be handed over to the

applicable collection point for the recycling of electrical

and electronic equipment. By ensuring this product is

disposed of correctly, you will help prevent potential

negative consequences for the environment and human

health, which could otherwise be caused by inappropriate

waste handling of this product. The recycling of materials

will help to conserve natural resources. For more detailed

information about recycling of this product, please contact

your local Civic Office, your household waste disposal

service or the shop where you purchased the product.

Applicable accessory: Remote commander

Disposal of waste batteries

(applicable in the European Union

and other European countries with

separate collection systems)

This symbol on the battery or on the packaging indicates

that the battery provided with this product shall not be

treated as household waste. By ensuring these batteries are

disposed of correctly, you will help prevent potentially

negative consequences for the environment and human

health which could otherwise be caused by inappropriate

waste handling of the battery. The recycling of the

materials will help to conserve natural resources.

In case of products that for safety, performance or data

integrity reasons require a permanent connection with an

incorporated battery, this battery should be replaced by

qualified service staff only. To ensure that the battery will

be treated properly, hand over the product at end-of-life to

the applicable collection point for the recycling of

electrical and electronic equipment.

For all other batteries, please view the section on how to

remove the battery from the product safely. Hand the

battery over to the applicable collection point for the

recycling of waste batteries.

For more detailed information about recycling of this

product or battery, please contact your local Civic Office,

your household waste disposal service or the shop where

you purchased the product.

Windows Media, and the

Windows logo are trademarks

or registered trademarks of

Microsoft Corporation in the

United States and/or other countries.

MPEG Layer-3 audio coding technology and

patents licensed from Fraunhofer IIS and Thomson.

This product is protected by certain intellectual

property rights of Microsoft Corporation. Use or

distribution of such technology outside of this

product is prohibited without a license from

Microsoft or an authorized Microsoft subsidiary.

3

Warning if your car’s ignition has no

ACC position

Be sure to set the Auto Off function (page 17).

The unit will shut off completely and

automatically in the set time after the unit is

turned off, which prevents battery drain.

If you do not set the Auto Off function, press

and hold (OFF) until the display disappears

each time you turn the ignition off.

Content providers are using the digital rights

management technology for Windows Media

contained in this device (“WM-DRM”) to protect

the integrity of their content (“Secure Content”) so

that their intellectual property, including copyright,

in such content is not misappropriated.

This device uses WM-DRM software to play

Secure Content (“WM-DRM Software”). If the

security of the WM-DRM Software in this device

has been compromised, owners of Secure Content

(“Secure Content Owners”) may request that

Microsoft revoke the WM-DRM Software’s right

to acquire new licenses to copy, display and/or

play Secure Content. Revocation does not alter the

WM-DRM Software’s ability to play unprotected

content. A list of revoked WM-DRM Software is

sent to your device whenever you download a

license for Secure Content from the Internet or

from a PC. Microsoft may, in conjunction with

such license, also download revocation lists onto

your device on behalf of Secure Content Owners.

4

Table of Contents

Getting Started

Playable discs on this unit . . . . . . . . . . . . . . . . . 6

Resetting the unit. . . . . . . . . . . . . . . . . . . . . . . . 6

Canceling the DEMO mode . . . . . . . . . . . . . . . 6

Preparing the card remote commander . . . . . . . 6

Setting the clock . . . . . . . . . . . . . . . . . . . . . . . . 6

Detaching the front panel . . . . . . . . . . . . . . . . . 7

Attaching the front panel . . . . . . . . . . . . . . . 7

Location of controls and basic

operations

Main unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Card remote commander RM-X151 . . . . . . . 8

Searching for a track . . . . . . . . . . . . . . . . . . . . 10

Searching a track by name

— Quick-BrowZer . . . . . . . . . . . . . . . . . . . 10

Searching a track by listening to track passages

— ZAPPIN™ . . . . . . . . . . . . . . . . . . . . . . . 10

Radio

Storing and receiving stations . . . . . . . . . . . . . 11

Storing automatically — BTM . . . . . . . . . . 11

Storing manually. . . . . . . . . . . . . . . . . . . . . 11

Receiving the stored stations . . . . . . . . . . . 11

Tuning automatically . . . . . . . . . . . . . . . . . 11

RDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Setting AF and TA . . . . . . . . . . . . . . . . . . . 12

Selecting PTY. . . . . . . . . . . . . . . . . . . . . . . 13

Setting CT. . . . . . . . . . . . . . . . . . . . . . . . . . 13

CD

Display items . . . . . . . . . . . . . . . . . . . . . . . 13

Repeat and shuffle play. . . . . . . . . . . . . . . . 13

USB devices

Playing back a USB device . . . . . . . . . . . . . . . 14

Display items . . . . . . . . . . . . . . . . . . . . . . . 14

Repeat and shuffle play. . . . . . . . . . . . . . . . 14

iPod

Playing back iPod . . . . . . . . . . . . . . . . . . . . . . 15

Display items . . . . . . . . . . . . . . . . . . . . . . . 15

Setting the play mode . . . . . . . . . . . . . . . . . . . 16

Repeat and shuffle play . . . . . . . . . . . . . . . 16

Operating an iPod directly

— Passenger control . . . . . . . . . . . . . . . . . . . . 16

Other functions

Changing the sound settings . . . . . . . . . . . . . . 17

Adjusting the sound characteristics . . . . . . 17

Customizing the equalizer curve

— EQ3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Adjusting setup items — SET . . . . . . . . . . . . 17

Using optional equipment. . . . . . . . . . . . . . . . 18

Auxiliary audio equipment. . . . . . . . . . . . . 18

Rotary commander RM-X4S . . . . . . . . . . . 18

Additional Information

Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Notes on discs . . . . . . . . . . . . . . . . . . . . . . 19

Playback order of MP3/WMA/AAC

files. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

About iPod . . . . . . . . . . . . . . . . . . . . . . . . . 20

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Removing the unit. . . . . . . . . . . . . . . . . . . . . . 21

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . 22

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . 22

Error displays/Messages. . . . . . . . . . . . . . . 24

5

Support site

If you have any questions or for the latest support information on this

product, please visit the web site below:

http://support.sony-europe.com/

Provides information on:

• Models and manufacturers of compatible digital audio players

• Supported MP3/WMA/AAC files

6

Getting Started

Playable discs on this unit

This unit can play CD-DA (also containing CD

TEXT) and CD-R/CD-RW (MP3/WMA/AAC

files (page 19)).

Resetting the unit

Before operating the unit for the first time, or

after replacing the car battery or changing the

connections, you must reset the unit.

Detach the front panel (page 7) and press the

RESET button (page 8) with a pointed object,

such as a ball-point pen.

Note

Pressing the RESET button will erase the clock setting

and some stored contents.

Canceling the DEMO mode

You can cancel the demonstration display which

appears during turning off.

1 Press and hold the select button.

The setup display appears.

2 Press the select button repeatedly

until “DEMO” appears.

3 Rotate the control dial to select

“DEMO-OFF.”

4 Press and hold the select button.

The setup is complete and the display returns

to normal play/reception mode.

Preparing the card remote

commander

Remove the insulation film.

Tip

For how to replace the battery, see page 20.

Setting the clock

The clock uses a 24-hour digital indication.

1 Press and hold the select button.

The setup display appears.

2 Press the select button repeatedly

until “CLOCK-ADJ” appears.

3 Press (SEEK) +.

The hour indication flashes.

4 Rotate the control dial to set the hour

and minute.

To move the digital indication, press (SEEK)

+/–.

5 After setting the minute, press the

select button.

The setup is complete and the clock starts.

To display the clock, press (DSPL). Press

(DSPL) again to return to the previous display.

Tip

You can set the clock automatically with the RDS

feature (page 13).

Type of discs Label on the disc

CD-DA

MP3

WMA

AAC

7

Detaching the front panel

You can detach the front panel of this unit to

prevent theft.

Caution alarm

If you turn the ignition switch to the OFF

position without detaching the front panel, the

caution alarm will sound for a few seconds.

The alarm will only sound if the built-in

amplifier is used.

1 Press (OFF).

The unit is turned off.

2 Press , then pull it off towards you.

Notes

• Do not drop or put excessive pressure on the front

panel and display window.

• Do not subject the front panel to heat/high

temperature or moisture. Avoid leaving it in a parked

car or on a dashboard/rear tray.

• Do not detach the front panel during playback of the

USB device, otherwise USB data may be damaged.

Attaching the front panel

Engage part A of the front panel with part B of

the unit, as illustrated, and push the left side into

position until it clicks.

Note

Do not put anything on the inner surface of the front

panel.

B

A

8

Location of controls and basic operations

Main unit

Card remote commander

RM-X151

This section contains instructions on the location

of controls and basic operations. For details, see

the respective pages.

The corresponding buttons on the card remote

commander control the same functions as those

on the unit.

A OFF button

To power off; stop the source.

B (BACK) button page 10

To return to the previous display.

C SOURCE button

To power on; change the source (Radio/CD/

USB/AUX).

D (BROWSE) button page 10

To enter the Quick-BrowZer mode.

E Control dial/select button

To adjust volume (rotate); select setup items

(press and rotate).

F Disc slot

Insert the disc (label side up), playback

starts.

G Display window

H Z (eject) button

To eject the disc.

I USB terminal page 14

To connect to the USB device.

ALBM ARTIST TRACK SHUF ZAP

+

DM

LOUDDISCREGTPTAAF

AUX

ZAP

PAUSE

REPPTY SHUF SCRL

OFF

1 2 3 4 5 6

DM

ALBM

SOURCE

MODE

SEEK

PUSH ENTER

/

SELECT

DSPLAF/TA

1

q

a

q

;

9

2

q

s

q

k

q

l

q

h

4 65 7

8

3

q

j

q

g

q

d

q

f

OFF

DSPL

SCRL

SEL

SOURCE

MODE

132

465

ATT

VOL

+

–

+

–

3

wf

qs

1

wh

w;

wa

wd

ws

wj

wg

9

J SEEK +/– buttons

CD/USB:

To skip tracks (press); skip tracks

continuously (press, then press again within

about 1 second and hold); reverse/fast-

forward a track (press and hold).

Radio:

To tune in stations automatically (press); find

a station manually (press and hold).

K (front panel release) button page 7

L MODE button page 11, 15, 16

Press to: Select the radio band (FM/MW/

LW)/select the play mode of iPod.

Press and hold to: Enter/cancel the passenger

control.

M Receptor for the card remote

commander

N RESET button (located behind the front

panel) page 6

O ZAP button page 11

To enter ZAPPIN™ mode.

P AF (Alternative Frequencies)/

TA (Traffic Announcement)/

PTY (Program Type) button page 12,

13

To set AF and TA (press); select PTY (press

and hold) in RDS.

Q Number buttons

CD/USB:

(1)/(2): ALBM –/+ (during MP3/WMA/

AAC playback)

To skip albums (press); skip albums

continuously (press and hold).

(3): REP page 13, 14, 16

(4): SHUF page 13, 14, 16

(5): DM+

Improves digitally compressed sound,

such as MP3.

To activate the DM+ function, set

“ON.” To cancel, set “OFF.”

(6): PAUSE

To pause playback. To cancel, press

again.

Radio:

To receive stored stations (press); store

stations (press and hold).

R DSPL (display)/SCRL (scroll) button

page 12, 13, 14, 15, 16

To change display items (press); scroll the

display item (press and hold).

S AUX input jack page 18

To connect a portable audio device.

The following buttons on the card remote

commander have also different buttons/functions

from the unit. Remove the insulation film before

use (page 6).

w; < (.)/, (>) buttons

To control CD/radio/USB, the same as

(SEEK) –/+ on the unit.

Setup, sound setting, etc., can be operated by

< ,.

wa DSPL (display) button page 12, 13,

14, 15, 16

To change display items.

ws VOL (volume) +/– button

To adjust volume.

wd ATT (attenuate) button

To attenuate the sound. To cancel, press

again.

wf SEL (select) button

The same as the select button on the unit.

wg M (+)/m (–) buttons

To control CD/USB, the same as (1)/(2)

(ALBM –/+) on the unit.

Setup, sound setting, etc., can be operated by

M m.

wh SCRL (scroll) button

To scroll the display item.

wj Number buttons

To receive stored stations (press); store

stations (press and hold).

Note

If the unit is turned off and the display disappears, it

cannot be operated with the card remote commander

unless (SOURCE) on the unit is pressed, or a disc is

inserted to activate the unit first.

10

Searching for a track

Searching a track by name

— Quick-BrowZer

You can search for a track in a CD or USB device

easily by category.

1 Press (BROWSE).

The unit enters the Quick-BrowZer mode,

and the list of search categories appears.

2 Rotate the control dial to select the

desired search category, then press it

to confirm.

3 Repeat step 2 until the desired track is

selected.

Playback starts.

To return to the previous display

Press (BACK).

To exit the Quick-BrowZer mode

Press (BROWSE).

Note

When entering the Quick-BrowZer mode, the repeat/

shuffle setting is canceled.

Searching by skip items

— Jump mode

When many items are in a category, you can

search the desired item quickly.

1 Press (SEEK) + in Quick-BrowZer mode.

The following display appears.

A Current item number

B Total item number in the current layer

Then the item name will appear.

2 Rotate the control dial to select the desired

item, or one near the desired item.

It skips in steps of 10% of the total item

number.

3 Press the select button.

The display returns to the Quick-BrowZer

mode and the selected item appears.

4 Rotate the control dial to select the desired

item and press it.

Playback starts if the selected item is a track.

To cancel Jump mode

Press (BACK) or (SEEK) –.

Searching a track by listening to

track passages — ZAPPIN™

While playing back short track passages in a CD

or USB device in sequence, you can search for a

track you want to listen to.

ZAPPIN mode is suitable for searching for a

track in shuffle or shuffle repeat mode.

OFF

S

O

U

R

C

E

M

O

D

E

SEEK

PUSH ENTER

/

SELECT

S

E

K

(BROWSE)

Control dial/

select button

(BACK)

SEEK +/–

ZAP

OFF

S

O

U

R

C

E

M

O

D

E

SEEK

PUSH ENTER

/

SELECT

S

E

K

ZAP

Select button

(BACK)

11

1 Press (ZAP) during playback.

After “ZAPPIN” appears in the display,

playback starts from a passage of the next

track.

The passage is played for the set time, then a

click sounds and the next passage starts.

2 Press the select button or (ZAP) when

a track you want to listen is played

back.

The track that you select returns to normal

play mode from the beginning.

To search a track by ZAPPIN mode again,

repeat steps 1 and 2.

Tips

• You can select the playback time from about 6

seconds/9 seconds/30 seconds (page 18).You

cannot select the passage of the track to playback.

• Press (SEEK) –/+ or (1)/(2) (ALBM –/+) in ZAPPIN

mode to skip a track or album.

• Pressing (BACK) also confirms a track to

playback.

Radio

Storing and receiving stations

Caution

When tuning in stations while driving, use Best

Tuning Memory (BTM) to prevent an accident.

Storing automatically — BTM

1 Press (SOURCE) repeatedly until

“TUNER” appears.

To change the band, press (MODE)

repeatedly. You can select from FM1, FM2,

FM3, MW or LW.

2 Press and hold the select button.

The setup display appears.

3 Press the select button repeatedly

until “BTM” appears.

4 Press (SEEK) +.

The unit stores stations in order of frequency

on the number buttons.

A beep sounds when the setting is stored.

Storing manually

1 While receiving the station that you

want to store, press and hold a

number button ((1) to (6)) until

“MEM” appears.

Note

If you try to store another station on the same number

button, the previously stored station will be replaced.

Tip

When an RDS station is stored, the AF/TA setting is

also stored (page 12).

Receiving the stored stations

1 Select the band, then press a number

button ((1) to (6)).

Tuning automatically

1 Select the band, then press (SEEK) +/–

to search for the station.

Scanning stops when the unit receives a

station. Repeat this procedure until the

desired station is received.

Tip

If you know the frequency of the station you want to

listen to, press and hold (SEEK) +/– to locate the

approximate frequency, then press (SEEK) +/–

repeatedly to fine adjust to the desired frequency

(manual tuning).

ZAP

1

2

3

4

The part of each track to

playback in ZAPPIN mode.

Track

12

RDS

Overview

FM stations with Radio Data System (RDS)

service send inaudible digital information along

with the regular radio program signal.

Display items

A TA/TP*

1

B Radio band, Function

C Frequency*

2

(Program service name), Preset

number, Clock, RDS data

*1 “TA” flashes during traffic information. “TP” lights

up while such a station is received.

*2 While receiving the RDS station, “ *” is displayed

on the left of the frequency indication.

To change display items C, press (DSPL).

RDS services

This unit automatically provides RDS services as

follows:

Notes

• Depending on the country/region, not all RDS

functions may be available.

• RDS will not work if the signal strength is too weak,

or if the station you are tuned to is not transmitting

RDS data.

Setting AF and TA

1 Press (AF/TA) repeatedly until the

desired setting appears.

Storing RDS stations with the AF and

TA setting

You can preset RDS stations along with the AF/

TA setting. If you use the BTM function, only

RDS stations are stored with the same AF/TA

setting.

If you preset manually, you can preset both RDS

and non-RDS stations with the AF/TA setting for

each.

1 Set AF/TA, then store the station with BTM or

manually.

Receiving emergency

announcements

With AF or TA on, the emergency

announcements will automatically interrupt the

currently selected source.

Tip

If you adjust the volume level during a traffic

announcement, that level will be stored into memory

for subsequent traffic announcements, independently

from the regular volume level.

Staying with one regional program

— REG

When the AF function is on: this unit’s factory

setting restricts reception to a specific region, so

you will not be switched to another regional

station with a stronger frequency.

If you leave this regional program’s reception

area, set “REG-OFF” in setup during FM

reception (page 18).

Note

This function does not work in the UK and in some

other areas.

Local Link function (UK only)

This function enables you to select other local

stations in the area, even if they are not stored on

your number buttons.

1 During FM reception, press a number button

((1) to (6)) on which a local station is stored.

2 Within 5 seconds, press again a number button

of the local station.

Repeat this procedure until the local station is

received.

AF (Alternative Frequencies)

Selects and retunes the station with the

strongest signal in a network. By using this

function, you can continuously listen to the

same program during a long-distance drive

without having to retune the same station

manually.

TA (Traffic Announcement)/TP (Traffic

Program)

Provides current traffic information/programs.

Any information/program received, will

interrupt the currently selected source.

PTY (Program Types)

Displays the currently received program type.

Also searches your selected program type.

CT (Clock Time)

The CT data from the RDS transmission sets

the clock.

Select To

AF-ON activate AF and deactivate TA.

TA-ON activate TA and deactivate AF.

AF, TA-ON activate both AF and TA.

AF, TA-OFF deactivate both AF and TA.

13

Selecting PTY

1 Press and hold (AF/TA) (PTY) during

FM reception.

The current program type name appears if the

station is transmitting PTY data.

2 Press (AF/TA) (PTY) repeatedly until

the desired program type appears.

3 Press (SEEK) +/–.

The unit starts to search for a station

broadcasting the selected program type.

Type of programs

Note

You cannot use this function in countries/regions

where no PTY data is available.

Setting CT

1 Set “CT-ON” in setup (page 17).

Notes

• The CT function may not work even though an RDS

station is being received.

• There might be a difference between the time set by

the CT function and the actual time.

CD

Display items

A Source

B Track name*

1

, Disc/artist name*

1

, Artist

name*

1

, Album number*

2

, Album name*

1

,

Track number/Elapsed playing time, Clock

*1 The information of a CD TEXT, MP3/WMA/AAC is

displayed.

*2 Album number is displayed only when the album is

changed.

To change display items B, press (DSPL).

Tip

Displayed items will differ depending on the disc type,

recording format and settings.

Repeat and shuffle play

1 During playback, press (3) (REP) or

(4) (SHUF) repeatedly until the

desired setting appears.

* When an MP3/WMA/AAC is played.

To return to normal play mode, select “ OFF”

or “SHUF OFF.”

NEWS (News), AFFAIRS (Current Affairs),

INFO (Information), SPORT (Sports),

EDUCATE (Education), DRAMA (Drama),

CULTURE (Culture), SCIENCE (Science),

VARIED (Varied), POP M (Popular Music),

ROCK M (Rock Music), EASY M (Easy

Listening), LIGHT M (Light Classical),

CLASSICS (Classical), OTHER M (Other

Music Type), WEATHER (Weather),

FINANCE (Finance), CHILDREN (Children’s

Programs), SOCIAL A (Social Affairs),

RELIGION (Religion), PHONE IN (Phone In),

TRAVEL (Travel), LEISURE (Leisure), JAZZ

(Jazz Music), COUNTRY (Country Music),

NATION M (National Music), OLDIES (Oldies

Music), FOLK M (Folk Music), DOCUMENT

(Documentary)

Select To play

TRACK track repeatedly.

ALBUM* album repeatedly.

SHUF ALBUM* album in random order.

SHUF DISC disc in random order.

14

USB devices

For details on the compatibility of your USB

device, visit the support site.

• MSC (Mass Storage Class) and MTP (Media

Transfer Protocol) type USB devices compliant

with the USB standard can be used.

• Corresponding codec is MP3 (.mp3), WMA

(.wma) and AAC (.m4a).

• Backup of data in a USB device is

recommended.

Note

Connect the USB device after starting the engine.

Depending on the USB device, malfunction or damage

may occur if it is connected before starting the engine.

Playing back a USB device

1 Connect the USB device to the USB

terminal.

When using a cable, use the one supplied with

the USB device to connect.

Playback starts.

If a USB device is already connected, to start

playback, press (SOURCE) repeatedly until

“USB” appears.

Press (OFF) to stop playback.

Removing the USB device

1 Stop the USB device playback.

2 Remove the USB device.

If you remove your USB device during

playback, data in the USB device may be

damaged.

Notes

• Do not use USB devices so large or heavy that they

may fall down due to vibration, or cause a loose

connection.

• Do not detach the front panel during playback of the

USB device, otherwise USB data may be damaged.

• This unit cannot recognize USB devices via a USB

hub.

Display items

A Source

B Track name, Artist name, Album number*,

Album name, Track number/Elapsed playing

time, Clock

* Album number is displayed only when the album is

changed.

To change display items B, press (DSPL).

Notes

• Displayed items will differ, depending on the USB

device, recorded format and settings. For details,

visit the support site.

• The maximum number of displayable data is as

follows.

– folders (albums): 128

– files (tracks) per folder: 500

• Do not leave a USB device in a parked car, as

malfunction may result.

• It may take time for playback to begin, depending on

the amount of recorded data.

• DRM (Digital Rights Management) files may not be

played.

• During playback or fast-forward/reverse of a VBR

(Variable Bit Rate) MP3/WMA/AAC file, elapsed

playing time may not display accurately.

• Playback of the following MP3/WMA/AAC files is not

supported.

– lossless compression

– copyright-protected

Repeat and shuffle play

1 During playback, press (3) (REP) or

(4) (SHUF) repeatedly until the

desired setting appears.

After 3 seconds, the setting is complete.

To return to normal play mode, select “ OFF”

or “SHUF OFF. ”

Support site

http://support.sony-europe.com/

Select To play

TRACK track repeatedly.

ALBUM album repeatedly.

SHUF ALBUM album in random order.

SHUF DEVICE device in random order.

15

iPod

For details on the compatibility of your iPod, see

“About iPod” on page 20 or visit the support site.

In these Operating Instructions, “iPod” is used as

a general reference for the iPod functions on the

iPod and iPhone, unless otherwise specified by

the text or illustrations.

Playing back iPod

Before connecting the iPod, turn down the

volume of the unit.

1 Connect the iPod to the USB terminal

via the dock connector to USB cable.

The iPod will turn on automatically, and the

display will appear on the iPod screen as

below.*

Tip

We recommend the RC-100IP USB cable (not

supplied) to connect the dock connector.

The tracks on the iPod start playing

automatically from the point last played.

If an iPod is already connected, to start

playback press (SOURCE) repeatedly until

“USB” appears. (“IPD” appears in the display

when iPod is recognized.)

* If the iPod was played back in the passenger control

last time, this will not appear.

2 Press (MODE) to select the play mode.

The mode changes as follows:

RESUMING t ALBUM t TRACK t

PODCAST* t GENRE t PLAYLIST

t ARTIST

* May not appear depending on iPod setting.

3 Adjust the volume.

Press (OFF) to stop playback.

Removing the iPod

1 Stop the iPod playback.

2 Remove the iPod.

Caution for iPhone

When you connect an iPhone via USB, telephone

volume is controlled by iPhone itself. In order to avoid

sudden loud sound after a call, do not increase the

volume on the unit during a telephone call.

Notes

• Do not detach the front panel during playback of the

iPod, otherwise data may be damaged.

• This unit cannot recognize iPod via a USB hub.

Tips

• When the ignition key is turned to the ACC position,

and the unit is on, the iPod will be recharged.

• If the iPod is disconnected during playback, “NO

DEV” appears in the display of the unit.

Resume mode

When the iPod is connected to the dock

connector, the mode of this unit changes to

resume mode and playback starts in the mode set

by the iPod.

In resume mode, the following buttons do not

function.

– (3) (REP)

– (4) (SHUF)

Display items

A Source (iPod) indication

B Track name, Artist name, Album name, Track

number/Elapsed playing time, Clock

To change display items B, press (DSPL).

Tip

When album/podcast/genre/artist/playlist is changed,

its item number appears momentarily.

Note

Some letters stored in iPod may not be displayed

correctly.

Support site

http://support.sony-europe.com/

>

.

M

E

N

U

16

Setting the play mode

1 During playback, press (MODE).

The mode changes as follows:

ALBUM t TRACK t PODCAST* t

GENRE t PLAYLIST t ARTIST

* May not appear depending on iPod setting.

Skipping albums, podcasts, genres,

playlists and artists

Repeat and shuffle play

1 During playback, press (3) (REP) or

(4) (SHUF) repeatedly until the

desired setting appears.

After 3 seconds, the setting is complete.

To return to normal play mode, select “ OFF”

or “SHUF OFF.”

Operating an iPod directly

— Passenger control

You can operate an iPod connected to the dock

connector directly.

1 During playback, press and hold

(MODE).

“MODE IPOD” appears and you will be able

to operate the iPod directly.

To change the display item

Press (D SPL).

The display items change as follows:

Track name t Artist name t Album name t

MODE IPOD t Clock

To exit the passenger control

Press and hold (MODE).

Then “MODE AUDIO” will appear and the play

mode will change to “RESUMING.”

Notes

• The volume can be adjusted only by the unit.

• If this mode is canceled, the repeat setting will be

turned off.

To Press

Skip (1)/(2) (ALBM –/+)

[press once for each]

Skip

continuously

(1)/(2) (ALBM –/+)

[hold to desired point]

Select To play

TRACK track repeatedly.

ALBUM album repeatedly.

PODCAST podcast repeatedly.

ARTIST artist repeatedly.

PLAYLIST playlist repeatedly.

GENRE genre repeatedly.

SHUF ALBUM album in random order.

SHUF PODCAST podcast in random order.

SHUF ARTIST artist in random order.

SHUF PLAYLIST playlist in random order.

SHUF GENRE genre in random order.

SHUF DEVICE device in random order.

17

Other functions

Changing the sound settings

Adjusting the sound

characteristics

1 Press the select button repeatedly

until the desired item appears.

2 Rotate the control dial to adjust the

selected item.

3 Press (BACK).

The setting is complete and the display

returns to normal play/reception mode.

The following items can be set (follow the page

reference for details):

Customizing the equalizer curve

— EQ3

“CUSTOM” of EQ3 allows you to make your

own equalizer settings.

1 Select a source, then press the select

button repeatedly to select “EQ3.”

2 Rotate the control dial to select

“CUSTOM.”

3 Press the select button repeatedly

until “LOW,” “MID” or “HI” appears.

4 Rotate the control dial to adjust the

selected item.

The volume level is adjustable in 1 dB steps,

from –10 dB to +10 dB.

Repeat steps 3 and 4 to adjust the equalizer

curve.

To restore the factory-set equalizer curve,

press and hold the select button before the

setting is complete.

5 Press (BACK).

The setting is complete and the display

returns to normal play/reception mode.

Tip

Other equalizer types are also adjustable.

Adjusting setup items — SET

1 Press and hold the select button.

The setup display appears.

2 Press the select button repeatedly

until the desired item appears.

3 Rotate the control dial to select the

setting (example “ON” or “OFF”).

4 Press and hold the select button.

The setup is complete and the display returns

to normal play/reception mode.

Note

Displayed items will differ, depending on the source

and setting.

The following items can be set (follow the page

reference for details):

EQ3

Selects an equalizer curve from 7 music types.

LOW*

1

, MID*

1

, HI*

1

(page 17)

BAL (Balance)

Adjusts the sound balance between the left and

right speakers.

FAD (Fader)

Adjusts the relative level between the front and

rear speakers.

SUB*

2

(Subwoofer volume)

Adjusts the subwoofer volume.

AUX*

3

(AUX level)

Adjusts the volume level for each connected

auxiliary equipment: “+18 dB” – “0 dB” – “–8

dB.”

This setting negates the need to adjust the

volume level between sources.

*1 When EQ3 is activated.

*2 When the audio output is set to “SUB-OUT”

(page 17).

*3 When AUX source is activated.

CLOCK-ADJ (Clock Adjust) (page 6)

CT (Clock Time) (page 12, 13)

BEEP

Activates the beep sound: “ON,” “OFF.”

AUX-A*

1

(AUX Audio)

Activates the AUX source display: “ON,”

“OFF” (page 18).

A.OFF (Auto Off)

Shuts off automatically after a desired time

when the unit is turned off: “NO,” “30S

(seconds),” “30M (minutes),” “60M (minutes).”

SUB/REAR*

1

Switches the audio output: “SUB-OUT”

(subwoofer), “REAR-OUT” (power amplifier).

DEMO

(Demonstration)

Activates the demonstration: “ON,” “OFF.”

DIM (Dimmer)

Changes the display brightness: “ON,” “OFF.”

continue to next page t

18

Using optional equipment

Auxiliary audio equipment

By connecting an optional portable audio device

to the AUX input jack (stereo mini jack) on the

unit and then simply selecting the source, you

can listen on your car speakers. The volume level

is adjustable for any difference between the unit

and the portable audio device. Follow the

procedure below:

Connecting the portable audio

device

1 Turn off the portable audio device.

2 Turn down the volume on the unit.

3 Connect to the unit.

* Be sure to use a straight type plug.

Adjust the volume level

Be sure to adjust the volume for each connected

audio device before playback.

1 Turn down the volume on the unit.

2 Press (SOURCE) repeatedly until “AUX”

appears.

“AUX FRONT IN” appears.

3 Start playback of the portable audio device at a

moderate volume.

4 Set your usual listening volume on the unit.

5 Adjust the input level (page 17).

Rotary commander RM-X4S

Attaching the label

Attach the indication label depending on how

you mount the rotary commander.

M.DSPL (Motion Display)

Selects the Motion Display mode.

– “SA”: to show moving patterns and spectrum

analyzer.

– “OFF”: to deactivate the Motion Display.

A.SCRL (Auto Scroll)

Scrolls long items automatically: “ON,” “OFF.”

LOCAL (Local Seek Mode)

– “ON”: to only tune into stations with stronger

signals.

– “OFF”: to tune normal reception.

MONO*

2

(Monaural Mode)

Selects monaural reception mode to improve

poor FM reception: “ON,” “OFF.”

REG*

2

(Regional) (page 12)

Z.TIME (Zappin Time)

Selects the playback time for the ZAPPIN

function.

– “Z.TIME-1 (about 6 seconds),” “Z.TIME-2

(about 9 seconds),” “Z.TIME-3 (about 30

seconds).”

LPF*

3

(Low Pass Filter)

Selects the subwoofer cut-off frequency: “OFF,”

“80Hz,” “100Hz,” “120Hz,” “140Hz,” “160Hz.”

LPF NORM/REV*

3

(Low Pass Filter Normal/

Reverse)

Selects the phase when the LPF is on: “NORM,”

“REV.”

HPF (High Pass Filter)

Selects the front/rear speaker cut-off frequency:

“OFF,” “80Hz,” “100Hz,” “120Hz,” “140Hz,”

“160Hz.”

LOUD (Loudness)

Reinforces bass and treble for clear sound at low

volume levels: “ON,” “OFF.”

BTM (page 11)

*1 When the unit is turned off.

*2 When FM is received.

*3 When the audio output is set to “SUB-OUT.”

AUX

Connecting cord*

(not supplied)

S

E

L

D

S

P

L

M

O

D

E

S

E

L

D

S

P

L

M

O

D

E

19

Location of controls

The corresponding buttons on the rotary

commander control the same functions as those

on this unit.

The following controls on the rotary commander

require a different operation from the unit.

• ATT (attenuate) button

To attenuate the sound. To cancel, press again.

• PRESET/DISC* control

CD/USB: The same as (1)/(2) (ALBM –/+)

on the unit (push in and rotate).

Radio: To receive stored stations (push in and

rotate).

• VOL (volume) control

The same as the control dial on the unit (rotate).

• SEEK/AMS control

The same as (SEEK) +/– on the unit (rotate, or

rotate and hold).

• DSPL (display) button

To change display items.

* Not available for this unit.

Changing the operative direction

The operative direction of the controls is factory-

set as shown below.

If you need to mount the rotary commander on

the right hand side of the steering column, you

can reverse the operative direction.

1 While pushing the VOL control, press and

hold ( SEL ).

Additional Information

Precautions

• Cool off the unit beforehand if your car has been

parked in direct sunlight.

• Power antenna (aerial) extends automatically.

Moisture condensation

Should moisture condensation occur inside the unit,

remove the disc and wait for about an hour for it to

dry out; otherwise the unit will not operate properly.

To maintain high sound quality

Do not splash liquid onto the unit or discs.

Notes on discs

• Do not expose discs to direct sunlight or heat

sources such as hot air ducts, nor leave it in a car

parked in direct sunlight.

• Before playing, wipe the discs

with a cleaning cloth from the

center out. Do not use solvents

such as benzine, thinner,

commercially available

cleaners.

• This unit is designed to

playback discs that conform to

the Compact Disc (CD)

standard. DualDiscs and some of the music discs

encoded with copyright protection technologies do

not conform to the Compact Disc (CD) standard,

therefore, these discs may not be playable by this

unit.

• Discs that this unit CANNOT play

– Discs with labels, stickers, or sticky tape or

paper attached. Doing so may cause a

malfunction, or may ruin the disc.

– Discs with non-standard shapes (e.g., heart,

square, star). Attempting to do so may damage

the unit.

–8 cm (3

1

/4 in) discs

Notes on CD-R/CD-RW discs

• The maximum number of: (CD-R/CD-RW only)

– folders (albums): 150 (including root folder)

– files (tracks) and folders: 300 (may less than 300

if folder/file names contain many characters)

– displayable characters for a folder/file name: 32

(Joliet)/64 (Romeo)

• If the multi-session disc begins with a CD-DA

session, it is recognized as a CD-DA disc, and

other sessions are not played back.

• Discs that this unit CANNOT play

– CD-R/CD-RW of poor recording quality.

– CD-R/CD-RW recorded with an incompatible

recording device.

– CD-R/CD-RW which is finalized incorrectly.

OFF

ATT

SEL

SOURCE

DSPL

MODE

OFF

VOL

SEEK/AMS

PRESET/

DISC

To increase

To decrease

continue to next page t

20

– CD-R/CD-RW other than those recorded in

music CD format or MP3 format conforming to

ISO9660 Level 1/Level 2, Joliet/Romeo or

multi-session.

Playback order of MP3/WMA/AAC

files

About iPod

• You can connect to the following iPod models.

Update your iPod devices to the latest software

before use.

– iPod touch

– iPod classic

– iPod with video*

– iPod nano (3rd generation)

– iPod nano (2nd generation)

– iPod nano (1st generation)*

– iPhone and iPhone 3G

* Passenger control is not available for iPod nano (1st

generation) or iPod with video.

• “Made for iPod” means that an electronic

accessory has been designed to connect

specifically to iPod and has been certified by the

developer to meet Apple performance standards.

• “Works with iPhone” means that an electronic

accessory has been designed to connect

specifically to iPhone and has been certified by the

developer to meet Apple performance standards.

• Apple is not responsible for the operation of this

device or its compliance with safety and

regulatory standards.

If you have any questions or problems concerning

your unit that are not covered in this manual, consult

your nearest Sony dealer.

Maintenance

Replacing the lithium battery of the

card remote commander

Under normal conditions, the battery will last

approximately 1 year. (The service life may be

shorter, depending on the conditions of use.)

When the battery becomes weak, the range of the

card remote commander becomes shorter. Replace

the battery with a new CR2025 lithium battery. Use

of any other battery may present a risk of fire or

explosion.

Notes on the lithium battery

• Keep the lithium battery out of the reach of children.

Should the battery be swallowed, immediately

consult a doctor.

• Wipe the battery with a dry cloth to assure a good

contact.

• Be sure to observe the correct polarity when

installing the battery.

• Do not hold the battery with metallic tweezers,

otherwise a short-circuit may occur.

Fuse replacement

When replacing the fuse, be

sure to use one matching the

amperage rating stated on the

original fuse. If the fuse blows,

check the power connection and

replace the fuse. If the fuse

blows again after replacement,

there may be an internal

malfunction. In such a case,

consult your nearest Sony

dealer.

Folder

(album)

MP3/WMA/

AAC file

(track)

MP3/WMA/AAC

1

2

+ side up

c

WARNING

Battery may explode if mistreated.

Do not recharge, disassemble, or dispose of

in fire.

Fuse (10 A)

La page est en cours de chargement...

Sony CDX-GT530UI Le manuel du propriétaire

Sony CDX-GT530UI Le manuel du propriétaire

dans d''autres langues

Documents connexes