Insignia NS-PWME20 Guide d'installation rapide

Insignia
Marque
Insignia
Modèle
NS-PWME20
Catégorie
Souris
Taper
Guide d'installation rapide
DPI SWITCH KEY AND LED INDICATORS
There are three available DPI settings. The number of blinks on the LED
indicator indicates the DPI setting in use. Press the DPI switch key
repeatedly to cycle through the available DPI settings. Refer to the chart
below for setting indications.
Note: The default setting is 1200 DPI.
CLEANING YOUR MOUSE
• Wipe your mouse with a damp, lint-free cloth.
3 Insert the included AAA batteries into the battery compartment. Make
sure that the + and - signs match the symbols in the compartment.
4 Replace the battery cover.
Tip: Store the nano receiver in the mouse when it is not in use.
CONNECTING YOUR MOUSE TO YOUR COMPUTER
Connecting with the nano receiver
Connect your mouse to your computer using the included nano receiver.
1 Plug the nano receiver into a USB port on your computer.
2 Slide the power switch on your mouse to ON.
The computer automatically detects the mouse, and you can
immediately begin using it.
MOUSE FEATURES
INSTALLING THE MOUSE BATTERY AND REMOVING
THE NANO RECEIVER
1 Take o the battery cover.
2 Remove the nano receiver.
PACKAGE CONTENTS
• Wireless mouse
• Nano receiver
• AAA batteries (2)
• Quick Setup Guide
SYSTEM REQUIREMENTS
• Windows® 10, Windows® 8.1, Windows® 8, Mac OS 10.X or higher, or
Chrome OS
• One available USB port
Before using your new product, please read these instructions to prevent any damage.
QUICK SETUP GUIDE
Vertical Ergonomic
Wireless Mouse
6-Button
NSPWME20
DPI:
800 DPI
1200 DPI
1600 DPI
LED INDICATOR BLINKS:
1
2
3
Battery cover
Power switch
Sensor
DPI button
Backward button
Forward button
LED indicator
Scroll wheel
Left button
Right button
Nano receiver
AAA batteries
AAA batteries
Pull
SPECIFICATIONS
Mouse:
• Dimensions (H × W × D): 3.1 × 2.8 × 4.8 in. (7.8 × 7.1 × 12.4 cm)
• Weight: 3.3 oz. (94 g)
• Battery: 2 AAA alkaline batteries
• Battery life: 6 months (based on average usage)
• Radio frequency: 2.4 Ghz
• Operating distance: 33 ft. (10 m)
• Rating: 3.0 V C.C. - 10 mA
• DPI: 800, 1200, 1600
Nano receiver:
• Dimension (H × W × D): .57 × .25 × .74 in. (1.45 × .625 × 1.89 cm)
• Weight: .04 oz. (1.1 g)
• Interface: USB 1.1, 2.0, 3.0
LEGAL NOTICES
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment o and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
RSS-Gen and RSS-210 statement
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may
not cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables
aux appareils radio exempts de licence. L'exploitation est autorisée aux
deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage,
et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique
subi, même si le brouillage est susceptible d'en compromettre le
fonctionnement.
TROUBLESHOOTING
My mouse is not working.
• Make sure that your mouse is turned on.
• Move your mouse closer to your computer.
• Make sure that your computer meets the system requirements.
• Only use your mouse on a clean, at, non-slippery surface to ensure
smooth and accurate cursor action.
• Avoid using your mouse on reective, transparent, or metallic surfaces.
• Make sure that your mouse and nano receiver are paired.
• Replace your mouse battery. The LED indicator blinks for 10 seconds
when the battery is low.
• Try connecting your nano receiver to a dierent USB port on your
computer.
• Try removing or moving other wireless devices near the computer to
prevent interference.
My mouse pointer or scroll wheel is too sensitive or not sensitive
enough.
• Adjust the cursor or scroll wheel settings on your computer. Refer to the
documentation that came with your computer.
• Remove any metallic objects from the line of sight between your
computer and the mouse.
• Move the mouse closer to your computer.
• Turn o the mouse, then turn it on again.
V1 ENGLISH 19-0404
RSS-102 statement
This equipment complies with Industry Canada radiation exposure limits
set forth for an uncontrolled environment.
Cet équipement est conforme à l'exposition aux rayonnements Industry
Canada limites établies pour un environnement non contrôlé.
RSS-Gen and RSS-247 statement
This device complies with Industry Canada licence-exempt RSS
standard(s). Operation is subject to the following two conditions: (1) this
device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation
of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables
aux appareils radio exempts de licence. L'exploitation est autorisée aux
deux conditions suivantes : (1) l'appareil ne doit pas produire de
brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage
radio électrique subi, même si le brouillage est susceptible d'en
compromettre le fonctionnement.
ONEYEAR LIMITED WARRANTY
For complete warranty, visit www.insigniaproducts.com.
CONTACT INSIGNIA
1-877-467-4289 (U.S. and Canada) or 01-800-926-3000 (Mexico)
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its aliated companies
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richeld, MN 55423 U.S.A.
©2019 Best Buy. All rights reserved.
  • Page 1 1
  • Page 2 2

Insignia NS-PWME20 Guide d'installation rapide

Insignia
Marque
Insignia
Modèle
NS-PWME20
Catégorie
Souris
Taper
Guide d'installation rapide
Télécharger le PDF
rapport

dans d''autres langues

Documents connexes

Autres documents