Mr. Heater BIG Buddy MH18B Manuel utilisateur

Marque: Mr. Heater

Modèle: BIG Buddy MH18B

Catégorie: Chauffe-eau

Taper: Manuel utilisateur

Ce manuel convient également à

MH18B

Vous trouverez ci-dessous une brève information pour Radiant Heater Big Buddy MH18B. Il s'agit d'un radiateur au propane portable conçu pour une utilisation récréative et commerciale. Il est équipé d'une sécurité contre le monoxyde de carbone, et est prévu pour un usage extérieur uniquement. Il peut être utilisé avec des bouteilles de propane jetables de 1 lb ou des bouteilles rechargeables à distance de 20 lb. L'appareil dispose de plusieurs réglages de chaleur. Il est recommandé d'utiliser uniquement des accessoires de la marque Mr. Heater.

2017 78438 CAN-CB

For Canada & Massachusetts Sale

CARBON MONOXIDE HAZARD

This appliance can produce carbon

monoxide which has no odor.

Using it in an enclosed space can kill you.

Never use this appliance in an enclosed

space such as a camper, tent, car or

home.

DANGER:

!FOR YOUR SAFETY

If you smell gas:

1. Do not attempt to light appliance.

2. Extinguish any open flame.

3. Disconnect from fuel supply.

FOR YOUR SAFETY

Do not store or use gasoline or other flammable

vapors and liquids in the vicinity of this or any

other appliance.

PORTABLE PROPANE HEATER

USED FOR:

RECREATIONAL

AND COMMERCIAL

PORTABLE BIG BUDDY

RADIANT HEATER

READ INSTRUCTIONS CAREFULLY: Read and follow all instructions. Place instructions in a safe

place for future reference. Do not allow anyone who has not read these instructions to assemble,

light, adjust or operate the heater.

MH18B

www.mrheater.com 800-251-0001

Model #

LANGUAGES INCLUDED:

Use only Mr. Heater branded accessories

(See page 10 for WARNING information)

Mr. Heater | Big Buddy

This Page Intentionally Left Blank

CAUTION:

Some carpets or linoleum surfaces may discolor if heater is

placed directly on these floor coverings.

When operating the heater at altitudes over 7,000 FT above sea

level the heater may shut off. (Please read the GENERAL

INFORMATION)

SPECIFICATIONS

.....................................................MH18B

GAS TYPE ......................................................PROPANE

INPUT BTU/HR. ......................... 4,000 / 9,000 /18,000

TOP .......................................................................

....................................................................

SIDES ......................................................................

REAR .......................................................................

CONTENTS

General Safety Instructions ............................................... 3

General Information .......................................................... 4

Operating with Disposable Propane Cylinders ................... 5

Operating With Hose Connected to Remote Cylinder ........ 6

Maintenance..................................................................... 7

Troubleshooting ................................................................ 7

........................................................................... 8

Parts Ordering Information ............................................. 10

Service Information ......................................................... 10

WARNING:

Every time hose or tank is connected to unit, connection must be checked for leaks in one or more ways: Apply

soapy water to connection, look for bubbles, listen for hiss of escaping gas, feel for extreme cold, smell for rotten

egg odor. Do not use if leaking!

THE STATE OF CALIFORNIA REQUIRES THE FOLLOWING WARNINGS:

WARNING: Combustion by-products produced when using this product contain carbon monoxide, a chemi-

cal known to the State of California to cause cancer and birth defects (or other reproductive harm).

WARNING:

Early signs of carbon monoxide poisoning resemble

the flu, with headache, dizziness and/or nausea. If

you have these signs, heater may not be working

properly. Get fresh air at once! Have heater serviced.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth

defects or other reproductive harm.

WARNING:

Any changes to this heater or its controls can be

dangerous.

NOTICE:

GENERAL SAFETY INSTRUCTIONS

THIS IS A HEATING APPLIANCE. DO NOT OPERATE

THIS APPLIANCE WITHOUT THE FRONT WIRE GUARD

INSTALLED. DO NOT ATTEMPT TO WARM OR COOK

FOOD ON THIS HEATER.

Do not use non-approved attachments on this heater.

Due to high temperatures, the appliance should be lo-

cated out of traffic and away from combustible materials.

Children and adults should be alerted to the hazard of

high surface temperatures and should stay away to avoid

burns or clothing ignition.

Young children should be carefully supervised when they

are near the appliance.

Do not place clothing or other flammable material on or

near the appliance.

Do not operate heater in any moving vehicle.

This heater requires a vent area of 18 square inches

(example 4 1

/41

ventilation during operation. Do not use other fuel burn-

ing appliances inside.

WARNING: ANY HOSE CONNECTION TO A QUICK DIS-

DURING OPERATION.

Any safety screen or guard removed for servicing the ap-

pliance must be replaced prior to operating the heater.

Mr. Heater | Big Buddy

WARNING:

Every time hose or tank is connected to unit, connection

must be checked for leaks in one or more ways: Apply

soapy water to connection, look for bubbles, listen for

hiss of escaping gas, feel for extreme cold, smell for rot-

ten egg odor. Do not use if leaking!

WARNING:

Any changes to this heater or its controls can be danger-

ous.

WARNING:

Early signs of carbon monoxide poisoning resemble the

flu, with headache, dizziness and/or nausea. If you have

these signs, heater may not be working properly. Get

fresh air at once! Have heater serviced.

WARNING:

DO NOT USE THIS HEATER INSIDE!

GENERAL INFORMATION:

When the heater is cold or at room temperature, it will

take a few minutes for the burner(s) tile to turn bright

orange. This is normal and the heater is working prop-

erly. If burner(s) tile is visibly flaming, turn heater off

and call a qualified service technician.

When the unit is lit, there should be about a quarter

inch border around the tile that will not turn bright

orange. This is normal.

When operating the heater at altitudes over 7,000

FT. above sea level, the unit may not burn as bright

as in lower altitudes. This is normal. At higher

altitudes, the heater may shut-off. If this happens,

provide fresh air, wait 5 minutes and re-light. Due to

local atmospheric conditions heater may not re-light.

Operating time will vary depending on the heater set-

ting and the supply cylinder size. (One 1 lb. cylinder: 1.5

to 6 hours. Two 1 lb. cylinders: 3 to 12 hours. Two 20

lb. cylinders: 50 to 220 hours.) Heater may be operated

from quick disconnect, one or both tank swivel inlets.

cantly reduced when operating continuously at tempera-

these conditions.

When moving heater when lit or bumping heater setting

it down, tip over switch may shut off heater. If this hap-

pens, re-light.

NOTE: THIS HEATER MAY BE OPERATED WITH (1) OR

(2) DISPOSABLE 1 LB. PROPANE CYLINDERS OR WITH

A REMOTE REFILLABLE CYLINDER(S) MAX. 20 LBS

USING (1) OR (2) F273701, F273702 OR F272702 HOSE

ASSEMBLIES WITH FUEL FILTERS (F273699)(Fig. A) ON

EACH HOSE ASSEMBLY. HOSE NO. F273704 BUDDY

SERIES HOSE, FUEL FILTER NOT REQUIRED. IT MAY

ALSO BE OPERATED WITH (1) F271802 HOSE ASSEMBLY

SOURCE *FILTER NOT REQUIRED* OR (1) F271803 HOSE

*FILTER NOT REQUIRED*.

quent cleaning may be required. The control compart-

ments, burner(s) and circulating air passageways of the

appliance must be kept clean, see MAINTENANCE.

DO NOT use this heater if any part has been under

water. Immediately call a qualified service technician to

inspect the heater and to replace any part of the control

system and any gas control, which has been under wa-

ter.

When used without adequate combustion and ventila-

tion air, this heater may give off excessive CARBON

Some people - pregnant women, persons with heart

or lung disease, anemia, those under the influence of

alcohol, those at high altitudes - are more affected by

carbon monoxide than others.

When heater is placed on the ground, make sure

the ground is level and keep any objects at least 24

inches from the front of the heater. THIS HEATER IS

hose assemblies

Accessory Not Included

Control Knob

Once the pilot has lit, hold the Control Knob down for

an additional 30 seconds to heat the thermocouple.

After 30 seconds, release the Control Knob and the pilot

should remain lit.

If the pilot goes out repeat the lighting procedure.

After lighting pilot, release Control Knob. Control Knob should

return to fully extended position. To operate heater slightly

depress knob and gently turn to lock in desired position.

tile has turned bright orange.

After first burner tile has turned bright orange, adjust

heat output by turning Control Knob to desired position

2) 1 LB. propane

bottles are needed to use heater in (HI) position.

Warning:

fan switch is located just left of control knob side handel

Installation of 4 D-cell batteries is required for fan

operation. Battery box is located on lower back panel of

battery installation. See figure 2.

Heater fan can also be powered by electrical adapter

liamp current with positive tip polarity. See figure 2.

To shut off heater, slightly push down and turn Control

CAUTION: After turning heater off, wire guard will

remain hot. Allow to thoroughly cool before storing.

Do not operate, store or remove cylinder(s) near flam-

mable items or ignition sources.

HEATER WHEN NOT IN USE!

LIGHTING / OPERATING INSTRUCTIONS

FOR USE WITH DISPOSABLE 1 LB.

PROPANE CYLINDERS:

WARNING: Always inspect propane cylinder and heater propane

connections for damage, dirt, and debris before attaching

propane cylinder. Do not use if head of cylinder is damaged,

punctured or deteriorated.

CONNECTIONS!

U.S. Dept. of Transportation (DOT).

Use only 16.4 oz. (1 lb.) disposable cylinders that mate

with No. 600 valve connection.

Heater and attached cylinder(s) must be in an upright

position during operation.

wise (from bottom) into portable heater until hand-tight.

DO NOT use thread sealant on this connection.

Check cylinder(s) connection for leaks with soapy water

at the threaded connection under the domed plastic

cover where the cylinder screws into the tank swivel.

SEE WARNING!

Depress the Control Knob and turn counterclockwise to

the pilot postion.

Hold Control Knob down in the pilot position for 30-40

seconds.

While holding down the Control Knob, rotate clockwise

pilot position, a spark will be generated at the pilot as-

sembly and the heater should light.

If the heater does not light on the first attempt, repeat

the procedure.

Mr. Heater | Big Buddy

LIGHTING / OPERATING INSTRUCTIONS

FOR USE WITH HOSE(S) CONNECTED TO

A REMOTE CYLINDER, MAXIMUM SIZE 20

LBS:

WARNING: ANY HOSE CONNECTION TO A QUICK

Mr. Heater Hose No. F271802 which includes a quick

Mr. Heater Hose No. F271803 which includes a quick

DANGER! NEVER bring a refillable propane cylinder

indoors. A fire or explosion can occur causing property

damage, serious injury or death!

Inspect the hose before each use of the heater. If there

is excessive abrasion or wear, or the hose is cut, replace

prior to using the heater with one of the Mr. Heater

The propane cylinder must include a listed overfilling

protection device as well as a collar to protect the cylin-

der valve.

Heater must be in an upright position during operation.

Mr. Heater strongly recommends using disposable

fuel filter F273699, which connects to tank swivel on

heater to trap any oil substances when connected to a

remote cylinder that can make the heater inoperable.

heater or connect to quick disconnect and screw con-

valve. Tighten all hose connections. DO NOT use thread

sealant on any of these connections.

Check all hose connections for leaks with soapy water at

the threaded connection under the domed plastic cover

where the hose connector screws into the tank swivel

WARNING!

Depress the control knob and turn counter-clockwise to

the pilot position.

Electrical Adapter Outlet

Electrical adapter

seconds.

pilot position, a spark will be generated at the pilot as-

sembly and the heater should light.

the procedure.

Once the pilot has lit, hold the control knob down for

an additional 30 seconds to heat the thermocouple.

After 30 seconds, release the control knob and the pilot

should remain lit.

After lighting pilot, release knob. Knob should return

to fully extended position. To operate heater slightly

depress knob and gently turn to lock in desired position.

tile has turned bright orange.

After first burner tile has turned bright orange, adjust

heat output by turning Control Knob to desired position

(2) 1 LB. propane bottles

are needed to use heater in (HI) position.

Caution: Do not try to adjust heating levels by using the

propane tank shut-off valve,

Warning:

Installation of 4 D-cell batteries is required for fan

operation. Battery box is located on lower back panel of

battery installation. See figure 2.

Heater fan can also be powered by electrical adapter,

liamp current with positive tip polarity. See figure 2.

To shut off heater, shut off propane at supply tank, al-

low heater to use-up propane in supply line until heater

shuts off, then slightly push down and turn Control

CAUTION: After turning heater off, wire guard will

remain hot. Allow to thoroughly cool before storing.

When not in use, the gas must be turned off at the

to use up propane in supply line until heater shuts off.

from the heater, the heater and the cylinder must be

stored outdoors, in a well ventilated space, out of reach

of children, and must not be stored in a building, garage

or any other enclosed area.

Indoor storage of the heater is permissible only if the

cylinder is disconnected and removed from the heater.

Cylinders must be stored outdoors out of the reach of

children and must not be stored in a building, garage or

any other enclosed area.

MAINTENANCE:

Always keep the heater area clear and free from combustible

materials, gasoline and other flammable vapors and liquids.

Keep the vent areas (slots in the bottom and the top at the front

of heater) clear at all times.

Visually inspect the pilot flame and burner periodically during

use. The pilot flame should be blue in color (not yellow) and will

extend beyond the thermocouple. The flame will surround the

flame may occur where the pilot flame and main burner flame

meet. The burner(s) should be bright orange (with a slight blue

color around the border, a red-orange haze that is visible on the

ceramic tile is acceptable) and without a noticeable flame. A

blue flame that rolls out at the top of the ceramic tile indicates

an accumulation of dust, lint or spider webs inside the casing

assembly and main burner assembly. If the pilot is yellow or the

burner has a noticeable flame, cleaning may be required. Use

the following procedure to inspect the casing assembly and main

burner assembly.

It is necessary to periodically check the burner(s) orifice and

burner venturi tube to make sure they are clear of insects/nests or

spider webs that may accumulate over time. A clogged tube can

lead to a fire.

1 Allow heater to thoroughly cool before performing any

maintenance.

2 Remove disposable 1 lb. cylinder(s) from heater or turn

hose from heater.

3 Remove wire guard from front of heater by gently bend-

ing to remove from holes in front cover.

slightly to release (2) plastic hooks on top of back cover.

5 Remove back cover.

6 Remove (3) screws attaching lower baffle to expose

burner air openings.

7 Inspect interior of casing assembly for accumulation

of dust, lint or spider webs. If necessary, clean interior

of casing assembly with a vacuum cleaner or apply air

pressure (max. 30 psi). Do not damage any components

within casing assembly when you are cleaning.

8 Inspect and clean main burner orifice located at bottom

TROUBLESHOOTING INFORMATION:

If Spark electrode does not produce spark.

CHECK

attach.

valve.

If Spark electrode produces spark but pilot does not light.

CHECK

hose and fuel filter then turn on valve at remote cylinder.

MAINTENANCE.

If Pilot flame does not stay lit when knob is released.

CHECK

depressed or held in long enough to purge air from

lines.

see MAINTENANCE.

•

If Main burner(s) does not ignite.

CHECK

MAINTENANCE.

CHECK

light

of burner venturi tube, by using a vacuum or apply air

pressure at orifice opening.

9 Inspect and clean pilot (mounted to bracket) by using a

vacuum or apply air pressure through the holes in the

WARNING: Never use needles, wires, or similar cylin-

drical objects to clean the pilot to avoid damaging the

calibrated ruby that controls the gas flow.

10 Apply air pressure (max. 30 psi) into ceramic tile of

burner(s) assembly and the venturi tube (with [2] air

openings) to remove dust, lint or spider webs.

11 Reinstall lower baffle with (3) screws

12 Slide back cover over (2) plastic hooks on top of heater.

Make sure rear cover aligns with plastic side covers.

Install (4) screws to hold in place.

Mr. Heater | Big Buddy

The following hose assemblies can also be used (with fuel filter F273699).

ACCESSORIES

ITEM# DESCRIPTION

RECOMMEDED

PARTS LIST:

SEE BACK PAGE FOR PARTS ORDERING INFORMATION

REF. # ITEM # DESCRIPTION

1 ................78402 ................HANDLE, ASSEMBLY

2 ................78403 ................FAN, SWITCH

3 ................78442 ................BACK, FAN, COVER

4 ................78404 ................BACK PANEL ASSEMBLY

(Includes parts 3, 5, 6, 7, and 8)

5 ................78405 ................FAN, BLOWER, WHEEL

6 ................78407 ................FAN, INTAKE, COVER

7 ................78408 ................DOOR, BATTERY, COVER

8 ................78409 ................BATTERY, TERMINALS

9 ................78410 ................DOOR LEFT SIDE COVER

10 ..............78411 ................LEFT, SIDE, COVER

11 ..............78412 ................(2) REGULATORS, MH18B

12 ..............78413 ................TIE, WRAPS

13 ..............78414 ................BRACKET, LEFT, SIDE, REG,

14 ..............78415 ................LEFT, SIDE, GAS, SUPPLY, LINE

15 ..............78518 ................FRAME, ASSEMBLY

16 ..............78417 ................BRACKET, RIGHT, SIDE, REG,

17 ..............78418 ................KNOB, CONTROL

18 ..............78419 ................DOOR, RIGHT, SIDE, COVER

19 ..............78420 ................RIGHT, SIDE, COVER

20 ..............78421 ................VALVE, CONTROL, ASSEMBLY

21 ..............78422 ................PILOT, ASSEMBLY

22 ..............78423 ................SHIELD, HEAT, BACK

23 ..............78424 ................SHIELD, HEAT, FRONT

24 ..............78516 ................COVER, FRONT

25 ..............78519 ................GUARD, WIRE, FACE

26 ..............78427 ................BRACKET, BOTTOM, PLENUM,

ASSEMBLY

27 ..............78428 ................PILOT, BRACKET

28 ..............78515 ................REFLECTOR

29 ..............78526 ................TILE

30 ..............78525 ................TILE, GASKET (NOT SHOWN)

31 ..............78517 ................PLENUM, BODY (2 REQUIRED)

32 ..............78432 ................BRACKET, TOP, PLENUM,

ASSEMBLY

33 .............. 78527 ................BURNER ORIFICE

(NOT SHOWN)

34 .............. 78403 ................

TIP-SWITCH

Mr. Heater | Big Buddy

CAN1-2.23-M82

Mr. Heater, Inc. reserves the right to make changes at any time, without notice or obligation, in colors, specifications,

accessories, materials and models.

OPERATING INSTRUCTIONS Model #

Mr. Heater and Portable Buddy are registered trademarks of Enerco Group, Inc.

PRODUCT REGISTRATION: Thank you for your purchase.

Please log in to http://www.egiregistration.com to register your product.

MH18B

WARNING:

SERVICE AGENCY. MR. HEATER HOSES F273701, F273702 AND F272702

F273699

F273704

WARNING:

NEVER

NEVER USE HAND-MADE OR THIRD PARTY ACCESSORIES OR

DEATH TO YOU OR OTHERS.

PARTS ORDERING INFORMATION:

PURCHASING: Accessories may be purchased at any Mr. Heater local dealer or direct from the factory

FOR INFORMATION REGARDING SERVICE

www.mrheater.com

Please include the model number, date of purchase, and description of problem in all communication.

LIMITED WARRANTY

Mr. Heater, Inc. warrants its heaters and accessories to be free from defects in material and workmanship for a period of

1 year from date of purchase. Mr. Heater, Inc. will repair or replace this product free of charge if it has been proven to be

defective within the 1-year period, and is returned at customer expense with proof of purchase to Mr. Heater, Inc. within

including but not limited to using a heater for the cooking or warming of foods; or c) has been used with hand-made or

third party accessories or attachments. This warranty gives you specific legal rights, and you may also have other rights

which vary from state to state.

LIRE SOIGNEUSEMENT LES INSTRUCTIONS :

PRODUCTION DE MONOXYDE

DE CARBONE

Cet appareil produit du monoxyde de

carbone, un gaz inodore.

endroit fermé risque de causer la mort.

véhicule récréatif, une automobile ou

une maison.

DANGER: POUR VOTRE SÉCURITÉ

Si vous percevez une odeur de gaz :

2. Éteignez toute flamme nue.

POUR VOTRE SÉCURITÉ

liquides ou vapeurs inflammables à proximité

PORTABLE BIG BUDDY

RADIANT HEATER MH18B

www.mrheater.com 800-251-0001

Modèle #

LANGUES INCLUSES:

Utilisez uniquement la marque Mr.

Heater d'accessoires (Voir page 10 pour

AVERTISSEMENT informations)

Pour la Vente du Canada et Massachusetts

2017 78438 CAN-CB

Mr. Heater | Big Buddy

Page laissée intentionnellement en blanc

Mr. Heater | Big Buddy 3

SPÉCIFICATIONS

......................................................MH18B

TYPE DE GAZ ................................................PROPANE

PUISSANCE BTU/H...................4 000 / 9 000 / 18 000

DESSUS ..............................................................76 cm

AVANT ................................................................61 cm

................................................................15 cm

.............................................................. 0 cm

Instructions générales en matière de sécurité .................... 3

Informations générales ..................................................... 4

gaz propane ..................................................................... 5

bonbonne distante ........................................................... 6

Entretien ........................................................................... 7

Dépannage ....................................................................... 7

................................................................. 8

Informations sur la commande de pièces ........................ 10

Informations sur le service .............................................. 10

AVERTISSEMENT :

REMARQUEZ :

AVERTISSEMENT :

sifflement produit par une fuite de gaz, à une sensa-

AVERTISSEMENT :

Toute modification de cet appareil de chauffage ou

de ses commandes constitue un danger.

AVERTISSEMENT :

de carbone ressemblent aux symptômes de la grippe

AVERTISSEMENT :

ATTENTION:

plancher.

altitudes plus de 7000 pieds au-dessus la mer niveler le

chauffage peut se éteindre. (Se il vous plaît lire les infor-

mations générales)

Mr. Heater | Big Buddy

INFORMATIONS GÉNÉRALES :

pérature de la pièce, il faudra quelques minutes pour

que le bloc de brûleur devienne orangé. Ceci est normal :

le bloc de brûleur est visiblement enflammé, éteignez

demi-centimètre entourant le bloc qui ne devienne pas

orangé. Ceci est normal.

allumez-le de nouveau. En raison des conditions atmo-

la température et de la capacité de la bonbonne de

gaz. (Une bonbonne de 500 g : 90 mn à 6 h. Deux bon-

bonnes de 500 g : 3 à 12 heures. Deux bonbonnes de

10 kg : 50 à 220 heures). Il est possible de faire fonction-

En raison des proprietes de gaz de petrole liquefie, les

est recommende dans ces conditions.

DE SÉCURITÉ

CET APPAREIL SERT AU CHAUFFAGE. NE LE FAITES PAS

FONCTIONNER SANS LA GRILLE PROTECTRICE. NE PAS

ESSAYER DE CHAUFFER OU CUIRE LES ALIMENTS SUR

LA CHAUFFAGE.

Ne pas utiliser non accessoires approuves sur ce

chauffage.

et des matériaux combustibles.

mouvement.

Cet appareil nécessite un espace de ventilation de

46 cm2 (par exemple, une ouverture de 10

,8 cm x 10

,8 cm)

minimum pour obtenir une bonne ventilation en cours

AVERTISSEMENT : TOUT BRANCHEMENT PAR TUYAU

ce dernier.

ENTRETIEN).

mouillée. Appelez immédiatement un technicien qualifié

les parties du système de commandes et de contrôle du

nécessaire à la combustion et à la ventilation, il produira

gaz toxique et inodore.

Certaines personnes, notamment les femmes enceintes,

celles affectées de problèmes cardio-respiratoires,

altitudes, seront davantage affectées par le monoxyde

de carbone que les autres.

assurez-vous que ce dernier est de niveau. Gardez

hose assemblies

Accessory Not Included

Mr. Heater | Big Buddy 5

neuse le raccord fileté situé sous le couvercle bombé en

plastique, là où la bonbonne se visse

Enfoncez et tournez le bouton de commande dans le

Maintenez enfoncé le bouton de commande sur la posi-

tion pilote pendant 30 à 40 secondes.

Tout en maintenant le bouton de commande enfoncé,

produira sur le compartiment de la veilleuse.

mière tentative, répétez la procédure.

Une fois la veilleuse allumée, maintenez le bouton

de commande enfoncé pendant 30 secondes supplé-

mentaires, afin de réchauffer le thermocouple.

ton et tournez-le doucement pour le verrouiller

dans la position souhaitée.

le premier bloc de brûleur devienne orange vif.

réglez la chaleur en tournant le bouton de commande

lorsque le bouton de commande est en position

1 LB. bouteilles de propane sont

nécessaires pour utiliser le radiateur en position (HI).

Avertissement :

DE CARBONE.

Pour augmenter la circulation de la chaleur, activez

ventilateur est situé juste à gauche de la poignée

4 batteries D-cell sont nécessaires au fonctionnement

chauffage. Suivez les instructions sur le couvercle à bat-

teries pour savoir comment installer correctement ces

dernières.

Ventilateur de chauffage peut egalement etre alimente

DE FONCTIONNEMENT AVEC DES

BONBONNES DE GAZ PROPANE JETABLES

DE 500 G.

AVERTISSEMENT : Vérifiez toujours les raccords de la bonbonne

la présence de particules, de poussières et de dommages. Si

en servez pas.

formes aux normes du U.S. Dept. of Transportation (DOT).

Assurez-vous que le bouton de commande à quatre posi-

Vissez la/les bonbonne(s) jetable(s) de gaz propane

elle(s) soi(en)t bien serrée(s). NE PAS

utiliser du produit d etancheite pour filetages sur cette

liaison

Bouton de

commande

Interrupteur du

ventilateur

REMARQUE : CET APPAREIL DE CHAUFFAGE PEUT FONC-

TIONNER AVEC (1) OU (2) BONBONNE(S) JETABLE(S) DE GAZ

PROPANE DE 500 G,OU AVEC UNE OU DES BONBONNE(S)

RÉUTILISABLE(S) DISTANTE(S) DE 10 KG MAXIMUM, EN

UTILISANT (1) OU (2) TUYAU(X) F273701, F273702 OU F272702

RANT PAS NÉCESSAIRE. CET APPAREIL PEUT ÉGALEMENT

Mr. Heater | Big Buddy

tentative, répétez la procédure.

enfoncé pendant 30 secondes supplémentaires, afin de

veilleuse devrait rester allumée.

légèrement sur le bouton et tournez-le doucement pour le

verrouiller dans la position souhaitée.

premier bloc de brûleur devienne orange vif.

sortie de chaleur en tournant le bouton de commande sur la

Attention :

en utilisant la soupape de fermeture du réservoir de gaz

propane.

Avertissement :

sur le couvercle à batteries pour savoir comment installer

FONCTIONNEMENT AVEC RACCORDEMENT

10 KG :

AVERTISSEMENT : TOUT BRANCHEMENT PAR TUYAU

débranchement rapide et un raccord conique femelle

de 1 cm à une source de gaz propane réglée sur une pression

des dommages matériels, des blessures graves et des pertes de

vie risquerait de se produire.

tuyau Mr. Heater mentionnés ci-dessus.

protéger la soupape de la bonbonne.

son fonctionnement.

toute substance graisseuse pouvant empêcher ce dernier de

chauffage, ou branchez au raccord à débranchement rapide,

propane liquéfié. Serrez tous les raccords de tuyau. NE PAS

connexions.

fileté situé sous le couvercle bombé en plastique, là où le

raccord se visse dans le pivot du réservoir et/ou le filtre à

combustible, et celui de la bonbonne de gaz propane liquéfié.

électrique

Adaptateur électrique

(veilleuse).

pilote pendant 1 à 5 secondes.

ATTENTION :

de chaleur.

ment le bouton de commande et tournez-le dans le sens

Mr. Heater | Big Buddy 7

ENTRETIEN

ou vapeurs inflammables. Conservez les espaces de ventilation (les

Inspectez visuellement la flamme de la veilleuse et le brûleur

thermocouple.

flamme jaune apparaisse là où se rencontrent la flamme veilleuse

rouge orangée visible sur le bloc céramique est acceptable) sans

céramique indique une accumulation de poussière, de fibres ou

du brûleur. Si la flamme de la veilleuse est jaune ou que le brûleur

brûleur.

la veilleuse Détecteur de raréfaction

9 Inspectez et nettoyez la veilleuse (installée sur le

comprimé dans les trous de la veilleuse, indiqués par

les flèches de la figure 3.

AVERTISSEMENT :

qui contrôle le débit du gaz.

compartiment du brûleur et sur le tube diffuseur (avec

11 Installez à nouveau la chicane inférieure avec (3) vis

de chauffage. Assurez-vous que le couvercle arrière soit

aligné avec les couvercles en plastique latéraux. Serrez

(4) vis pour fixer le tout.

le temps. Un tube obstrué peut causer un incendie.

2 Retirez la bonbonne de gaz jetable de 500 g de

de chauffage.

chauffage en la pliant légèrement pour la sortir des

trous du couvercle avant.

de chauffage. Soulevez-le légèrement pour libérer les

(2) crochets en plastique situés sur le couvercle arrière.

5 Retirez le couvercle arrière.

6 Retirez les (3) vis fixant la chicane inférieure, de manière

le tuyau, enfoncez légèrement le bouton de commande et

gaz propane restant dans le tuyau Si la bonbonne est

un garage ou tout autre endroit fermé.

garage ou tout autre endroit fermé.

Mr. Heater | Big Buddy

de 1 cm

avec écrou à filetage trapézoïdal.

avec volant)

ACCESSOIRES

ARTICLE DESCRIPTION

RECOMMANDÉ

# #

1 ............. 78402 ............POIGNÉE, COMPARTIMENT

2 ............. 78403 ............VENTILATEUR, INTERRUPTEUR

3 ............. 78442 ............ARRIÈRE, VENTILATEUR, COUVERCLE

4 ............. 78404 ............ASSEMBLAGE DE PANNEAU ARRIÈRE

(Inclut des parties 3, 5, 6, 7 et 8)

5 ............. 78405 ............VENTILATEUR, SOUFFLEUR, ROUE

6 ............. 78407 ............VENTILATEUR, ADMISSION, COUVERCLE

7 ............. 78408 ............PORTE, BATTERIE, COUVERCLE

8 ............. 78409 ............BATTERIE, TERMINAUX

9 ............. 78410 ............COUVERCLE LATÉRAL GAUCHE DE LA PORTE

10 ........... 78411 ............ GAUCHE, CÔTÉ, COUVERCLE

11 ........... 78412 ............RÉGULATEUR, MH18B

12 ........... 78436 ............PIED, CAOUTCHOUC

13 ........... 78454 ............SUPPORT, PIVOT DU RÉSERVOIR, GAUCHE

14 ........... 78452 ............SUPPORT, MONTAGE, RÉGULATEUR

15 ........... 78518 ............STRUCTURE, COMPARTIMENT

16 ........... 78455 ............SUPPORT, PIVOT DU RÉSERVOIR, DROIT

17 ........... 78418 ............BOUTON, COMMANDE

18 ........... 78419 ............PORTE, DROIT, CÔTÉ, COUVERCLE

19 ........... 78420 ............DROIT, CÔTÉ, COUVERCLE

20 ........... 78421 ............SOUPAPE, RÉGLAGE, COMPARTIMENT

21 ........... 78422 ............PILOT, VEILLEUSE, COMPARTIMENT

22 ........... 78423 ............BOUCLIER, CHALEUR, ARRIÈRE

23 ........... 78424 ............BOUCLIER, CHALEUR, AVANT

24 ........... 78516 ............COUVERCLE, AVANT

25 ........... 78519 ............PROTECTEUR, FIL, FACE

26 ........... 78427 ............SUPPORT, BAS, INFÉRIEUR, CHAMBRE

27 ........... 78428 ............VEILLEUSE, SUPPORT

28 ........... 78515 ............RÉFLECTEUR

29 ........... 78526 ............BLOC

30 ........... 78525 ............BLOC, JOINT D’ÉTANCHÉITÉ (NON ILLUSTRÉ)

31 ........... 78517 ............CHAMBRE, STRUCTURE (2 REQUIS)

32 ........... 78432 ............SUPPORT, HAUT, SUPÉRIEUR, CHAMBRE

33 ........... 78527 ............BRÛLEUR ORIFICE (NON ILLUSTRÉ)

34 ........... 73403 ............CHANGEMENT, TIPOVER

DÉPANNAGE

attachez-le.

défectueux; remplacez cette dernière.

bonbonne jetable ou raccordez le tuyau et ouvrez la

soupape de la bonbonne.

et enfoncez-le.

la saleté : nettoyez-la (voir ENTRETIEN).

Si la flamme de la veilleuse ne reste pas allumée lorsque vous

tuyau.

thermocouple : nettoyez la veilleuse (voir ENTRETIEN).

remplacez-le.

•

rebranchez-les.

nettoyez le brûleur (voir ENTRETIEN).

46 cm2 (par exemple, une ouverture de 10,8 x 10,8 cm).

Mr. Heater | Big Buddy 9

Instrucciones de operación y manual del usuarioMr. Heater | Calentador de Propano Portátil 10

CAN1-2.23-M82

MH18B

Modelo #

MANUAL DEL USUARIO

ADVERTENCIA:

F273701, F273702, Y F272702

F273699.

F273704

ADVERTENCIA:

COMO COMPRAR

GARANTIA LIMITADA

Enerco Group, Inc. garantiza que sus calentadores y accesorios no presentan defectos de material ni de mano

este producto sin cargo si se prueba que presenta falla dentro del plazo de 1 año y es devuelto a Enerco

Group, Inc. a cargo del cliente con el comprobante de compra dentro del período de la garantía.

las especificaciones, los accesorios, los materiales y los modelos.

REGISTRO DE PRODUCTO: Gracias por su compra.

Por favor entre al sistema a http://www.egiregistration.com para registrar su producto.

Mr. Heater BIG Buddy MH18B Manuel utilisateur

Marque: Mr. Heater

Modèle: BIG Buddy MH18B

Catégorie: Chauffe-eau

Taper: Manuel utilisateur

Ce manuel convient également à

MH18B

Télécharger le PDF

rapport

dans d''autres langues

English: Mr. Heater BIG Buddy MH18B User manual

Mr. Heater BIG Buddy MH18B Manuel utilisateur

Ce manuel convient également à

Mr. Heater BIG Buddy MH18B Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents