Amazfit GTR 3 Pro Guide de démarrage rapide

Marque: Amazfit

Modèle: GTR 3 Pro

Taper: Guide de démarrage rapide

Amazfit GTR 3 Pro

Product Manual

A2040

01 Package Contents

Smartwatch with band × 1 Charging base × 1 Instruction Manual × 1

02 About the Watch

Heart rate sensor

Charging contacts

Lower button:

Press the lower button to start a specific

application.

Upper button:

Press and hold the upper button to turn on/off or

restart the watch.

Click the upper button to go to the application list.

Rotate to switch pages.

Note: If the watch cannot be turned on by pressing and holding the upper button,

charge the watch and try again.

03 Pairing the Watch

Scan the QR code on the Instruction Manual with your mobile phone to download

the app to your mobile phone. You can also download the latest version of app

from the Google Play Store or Apple App Store.

Open the app, register an account and log in.

Follow the steps in the app to pair your watch correctly.

Once pairing is complete, the watch will display the

correct time.

You can set other watch features as needed.

Download Zepp App

Note:

For better user experience, please use the most recent version of the APP.

The operating system needs to be Android 7.0, iOS 12.0, or above.

Do not pair the watch directly using your mobile phone’s Bluetooth. Follow the

steps in the app to pair your watch correctly.

04 Charging the Watch

Note:

Please use the charging base that comes with the watch.

Make sure that the charging base is dry before charging.

Please use a 1A or above power adapter.

Connect the USB port of the watch charging cable to a power adapter or a

computer USB port.

Put the watch into the charging base. Pay attention to the direction and position

of the watch, and make sure that the metal contacts on the

back of the watch fit closely with the charging base.

When charging starts, the watch screen displays the

charging progress.

05 Disassembling and Assembling the Watch Strap

Please refer to the illustrations to disassemble or assemble the watch strap.

Note: Once the strap is assembled, pull the strap properly to ensure it is installed

successfully.

06 Wearing the Watch

Wear the watch strap neither too tight nor too loose, and leave enough space for the

skin to breathe. This makes you feel comfortable and allows the sensor to function.

When measuring blood oxygen saturation, wear the watch correctly. Avoid wearing

the watch on the wrist joint, keep your arm flat, maintain comfortable (appropriately

tight) fitting between the watch and the skin of your wrist, and keep your arm still

throughout the measurement process. When affected by external factors (arm sag,

arm sway, arm hair, tattoo, etc.), the measurement result may be inaccurate or the

measurement may fail and provide no output.

We recommend that you tighten the watch strap during workout and loosen it

afterwards.

07 Basic Parameters

Product Name: Smart Watch

Product model: A2040

Input: DC 5 V 500 mA MAX

Bluetooth version: V5.0

WLAN: 2.4 GHz 802.11 b/g/n

Bluetooth output power: <18 dBm

BLE output power: <5 dBm

View product certification information on the watch's Settings > System >

Regulation page.

Device requirements: Devices installed with Android 7.0 or iOS 12.0 or above OS versions

Operating temperature: 0°C to 45°C

Water resistance rating: 5 ATM

Bluetooth frequency: 2400–2483.5 MHz

WiFi frequency: 2400–2483.5 MHz

WiFi output power: <10 dBm

The Bluetooth® word mark and logos are registered trademarks owned by

Bluetooth SIG, Inc. and any use of such marks by Anhui Huami Information

Technology Co., Ltd. is under license. Other trademarks and trade names are

those of their respective owners.

This device complies with part 15 of the FCC Rules. Operation is subject to the

following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that

may cause undesired operation.

FCC ID: 2AC8UA2040

Any changes or modifications that are not expressly

approved by the party responsible for the compliance

may void the user’s authority to operate the device.

08 Regulatory Notice

IS 13252(Part 1)/

IEC 60950-1

R-41103527

www.bis.gov.in

HIDF19000259

Note: This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following

measures:

—Reorient or relocate the receiving antenna.

—Increase the separation between the equipment and receiver.

—Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

—Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The

device can be used in portable exposure condition without restriction.

This device contains licence-exempt transmitter(s)/receiver(s) that comply with

Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).

Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may

cause undesired operation of the device.

IC: 21806-A2040 CAN ICES-003 (B)/NMB-003(B)

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils

radioexempts de licence. L'exploitation est autorisée aux deux conditions suivantes :

(1) l'appareil ne doit pas produire de brouillage, et

(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi,

même si le brouillage est susceptible d'en compromettre le fonctionnement.

Under Industry Canada regulations, this radio transmitter may only operate using

an antenna of a type and maximum (or lesser) gain approved for the transmitter

by Industry Canada. To reduce potential radio interference to other users, the

antenna type and its gain should be so chosen that the equivalent isotropically

radiated power (e.i.r.p.) is not more than that necessary for successful

communication.

Conformément à la réglementation d'Industrie Canada, le présent émetteur radio

peut fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur)

approuvé pour l'émetteur par Industrie Canada. Dans le but de réduire les risques

de brouillage radioélectrique à l'intention des autres utilisateurs, il faut choisir le

type d'antenne et son gain de sorte que la puissance isotrope rayonnée

équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à l'établissement d'une

communication satisfaisante. 13

All products bearing this symbol are waste electrical and electronic

equipment (WEEE as in directive 2012/19/EU) which should not be mixed with

unsorted household waste. Instead, you should protect human health and the

environment by handing over your waste equipment to a designated

collection point for the recycling of waste electrical and electronic equipment,

appointed by the government or local authorities. Correct disposal and

recycling will help prevent potential negative consequences to the

environment and human health. Please contact the installer or local

authorities for more information about the location as well as terms and

conditions of such collection points.

09 Disposal and Recycling Information

10 Certifications and Safety Approvals

Hereby, Anhui Huami Information Technology Co., Ltd. declares that the

radio device type A2040 is in compliance with Directive 2014/53/EU. The

full text of the EU declaration of conformity is available at the following

internet address: https://support.amazfit.com/en/

For more regulatory information and product certification/compliance

logos related to Amazfit GTR 3 Pro, please go to Regulatory on your

Amazfit GTR 3 Pro.

Hereby, Anhui Huami Information Technology Co., Ltd. declares that

the radio device type A2040 is in compliance with Radio Equipment

Regulations 2017 (S.I. 2017/1206). The full text of the UK declaration of

conformity is available at the following internet address:

http://en.amazfit.com/support.html

11 Battery Safety

This device is equipped with a built-in battery that cannot be removed or replaced.

Do not disassemble or modify the battery by yourself.

Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting

of a battery, can result in an explosion.

Leaving a battery in an extremely high temperature surrounding environment

can result in an explosion or the leakage of flammable liquid or gas.

A battery subjected to extremely low air pressure may result in an explosion or

the leakage of flammable liquid or gas.

12 Safety Notice

Do not allow children or pets to bite or swallow the product or its accessories, as

this may cause injury.

Do not place this product under excessively high or low temperatures, which

may cause the product to catch fire or explode.

Do not place this product near heat sources or open flame, such as ovens and

electric heaters.

Some people may experience allergic skin reactions to plastics, leathers, fibers,

and other materials, and symptoms such as redness, swelling, and inflammation

will occur after long-term contact with this product's components. If you

experience such symptoms, please discontinue use and consult your doctor.

Do not use unauthorized or incompatible power adapters, chargers, or data

cables, which may damage the watch and accessories, or cause fire, explosion,

or other hazards.

The radio waves generated by this product may affect the normal operation of

implanted medical devices or personal medical devices, such as pacemakers

and hearing aids. If you use any such medical devices, consult the manufacturer

for relevant usage restrictions.

Do not dispose of this device or its accessories as ordinary household waste.

Please comply with local regulations for the disposal of this device and its

accessories, and support recycling.

13 Repair and Maintenance

Avoid using detergents such as soap, hand sanitizer, bath foam, or lotion for

cleaning to prevent chemical residues from irritating the skin, corroding the device,

or degrading the water resistance of the device.

After wearing the device while bathing (for devices that support bathing), swimming (for

devices that support swimming), or sweating, please promptly clean and dry the device.

The leather strap is not waterproof. Avoid getting the strap wet, as this may shorten

its service life.

When using light-colored watch straps, avoid contact with dark clothing to

prevent color staining.

Do not wear your watch during snorkeling, hot showers, hot springs, saunas

(steam rooms), diving, underwater diving, water skiing, and other activities

involving high-speed water currents.

La page charge ...

Amazfit GTR 3 Pro Guide de démarrage rapide

Marque: Amazfit

Modèle: GTR 3 Pro

Taper: Guide de démarrage rapide

Télécharger le PDF

rapport

dans d''autres langues

English: Amazfit GTR 3 Pro Quick start guide

Documents connexes

Autres documents

Boat SmartWatch Mode d'emploi