JennAir W11362913C Manuel utilisateur

Marque: JennAir

Modèle: W11362913C

Catégorie: Fours

Taper: Manuel utilisateur

Use & Care Guide

For questions about features, operation/performance, parts, accessories, warranty, or service in the U.S.A.,

call: 1-800-JENNAIR (1-800-536-6247), or visit our website at www.jennair.com.

In Canada, call: 1-800-JENNAIR (1-800-536-6247), or visit our website at www.jennair.ca.

W11362913C

JENNAIR® 30" (78.2 CM)

TOUCH ACTIVATED ELECTRONIC

INDUCTION COOKTOP

COOKTOP SAFETY

You can be killed or seriously injured if you don't immediately

You can be killed or seriously injured if you don't follow

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can

happen if the instructions are not followed.

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety

messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”

These words mean:

follow instructions.

instructions.

DANGER

WARNING

TABLE OF CONTENTS

COOKTOP SAFETY ....................................................................... 2

PARTS AND FEATURES-TOUCH-ACTIVATED CONTROLS .....5

Induction Ready Cookware .........................................................6

First Time Use ..............................................................................6

Daily Use ......................................................................................7

Functions ...................................................................................... 7

Indicators ...................................................................................... 8

Cooking Table ..............................................................................9

Assisted Cooking Table ...............................................................9

Ceramic Glass ............................................................................10

COOKTOP CARE ..........................................................................11

General Cleaning ........................................................................11

TROUBLESHOOTING ..................................................................12

ASSISTANCE OR SERVICE .........................................................13

In the U.S.A. ...............................................................................13

In Canada ...................................................................................13

Accessories ................................................................................13

SAVE THESE INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS

WARNING: To reduce the risk of fire, electrical shock,

injury to persons, or damage when using the cooktop, follow

basic precautions, including the following:

WARNING: Danger of fire: Do not store items on the

cooking surfaces. Never leave anything on the surface

when unattended and not in use. Never place flammable or

plastic items on or near the surface.

CAUTION: Do not store items of interest to children in

cabinets above a cooktop – Children climbing on the

cooktop to reach items could be seriously injured.

Proper Installation - The appliance, when installed, must be

electrically grounded in accordance with local codes, or in

the absence of local codes, with the National Electrical

Code, ANSI/NFPA 70 or the Canadian Electrical Code,

CSA C22.1-02. In Canada, the appliance must be

electrically grounded in accordance with Canadian

Electrical Code. Be sure your appliance is properly installed

and grounded by a qualified technician.

Never Use Your Cooktop for Warming or Heating the

Room.

Care must be taken to prevent Aluminum Foil and Meat

Probes from contacting Heating Elements.

Do Not Leave Children Alone – Children should not be left

alone or unattended in area where cooktop is in use. They

should never be allowed to sit or stand on any part of the

cooktop.

Wear Proper Apparel – Loose-fitting or hanging garments

should never be worn while using the cooktop.

User Servicing – Do not repair or replace any part of the

cooktop unless specifically recommended in the manual. All

other servicing should be referred to a qualified technician.

Do Not Use Water on Grease Fires – Smother fire or flame

or use dry chemical or foam-type extinguisher.

Do not use replacement parts that have not been

recommended by the manufacturer (e.g. parts made at

home using a 3D printer).

Use Only Dry Potholders – Moist or damp potholders on

hot surfaces may result in burns from steam. Do not let

potholder touch hot heating elements. Do not use a towel

or other bulky cloth.

DO NOT TOUCH SURFACE UNITS OR AREAS NEAR

UNITS – Surface units may be hot even though they are

dark in color. Areas near surface units may become hot

enough to cause burns. During and after use, do not touch,

or let clothing or other flammable materials contact surface

units or areas near units until they have had sufficient time

to cool. Among those areas are the cooktop and surfaces

facing the cooktop.

Use Proper Pan Size – This cooktop is equipped with one

or more surface units of different size. Select utensils

having flat bottoms large enough to cover the surface unit

heating element. The use of undersized utensils will

expose a portion of the heating element to direct contact

and may result in ignition of clothing. Proper relationship of

utensil to burner will also improve efficiency.

Never Leave Surface Units Unattended at High Heat

Settings – Boilover causes smoking and greasy spillovers

that may ignite.

Glazed Cooking Utensils – Only certain types of glass,

glass/ceramic, ceramic, earthenware, or other glazed

utensils are suitable for cooktop service without breaking

due to the sudden change in temperature.

Utensil Handles Should Be Turned Inward and Not Extend

Over Adjacent Surface Units – To reduce the risk of burns,

ignition of flammable materials, and spillage due to

unintentional contact with the utensil, the handle of a

utensil should be positioned so that it is turned inward, and

does not extend over adjacent surface units.

Do Not Cook on Broken Cooktop – If cooktop should

break, cleaning solutions and spillovers may penetrate the

broken cooktop and create a risk of electric shock. Contact

a qualified technician immediately.

Do Not Heat Unopened Food Containers – Build-up of

pressure may cause container to burst and result in injury.

Clean Cooktop With Caution – If a wet sponge or cloth is

used to wipe spills on a hot cooking area, be careful to

avoid steam burn. Some cleaners can produce noxious

fumes if applied to a hot surface.

For units with ventilating hood –

Clean Ventilating Hoods Frequently – Grease should not

be allowed to accumulate on hood or filter.

When flaming foods under the hood, turn the fan on.

For units with coil elements –

Make Sure Reflector Pans or Drip Bowls Are in Place –

Absence of these pans or bowls during cooking may

subject wiring or components underneath to damage.

Protective Liners – Do not use aluminum foil to line surface

unit drip bowls, except as suggested in the manual.

Improper installation of these liners may result in a risk of

electric shock, or fire.

Do Not Soak Removable Heating Elements - Heating

elements should never be immersed in water.

For units with induction elements –

Do not place metallic objects such as knives, forks, spoons

and lids on the cooktop surface since they can get hot.

This induction cooktop generates and uses ISM frequency energy that heats cookware by using an electromagnetic eld. It has been

tested and complies with Part 18 of the FCC Rules for ISM equipment. This induction cooktop meets the FCC requirements to minimize

interference with other devices in residential installation.

This induction cooktop may cause interference with television or radio reception. If interference occurs, the user should try to correct the

interference by:

Relocating the receiving antenna of the radio or television.

Increasing the distance between the cooktop and the receiver.

Connecting the receiver into a different outlet.

It is the user’s responsibility to correct any interference.

NOTE: People with a pacemaker or similar medical device should use care when standing near this induction cooktop while it is on. The

electromagnetic eld may affect the pacemaker or similar device. Consult your doctor, or the manufacturer of the pacemaker or similar

medical device for additional information about its effects with electromagnetic elds of the induction cooktop.

This device complies with Part 18 of the FCC Rules.

This device complies with Industry Canada ICES-001.

1. Identifying the cooking zone

2. Cooking zone ON/OFF button

3. Function active indicator

4. Auto Sensor function button

5. Cooking level selected

6. Control lock button - 3 seconds

7. Auto Sensor function button

8. Power adjustment buttons

9. Timer buttons

10. Timer indicator

11. Activation of special function

4 6 92 5 10 11

PARTS AND FEATURES-TOUCH-ACTIVATED CONTROLS

Cooktop

30" (78.2 cm) Touch-Activated Electronic Control Model

1. Cooktop

2. Control panel

Control Panels

30" (78.2 cm) Touch-Activated Electronic Control Models

First Time Use

POWER MANAGEMENT

At the time of purchase, the cooktop is set to 9 kW.

Adjust the setting in relation to the limits of the electrical system

in your home as described in the following paragraph.

NOTE: Depending on the power selected for the cooktop, some

of the cooking zone power levels and functions (e.g. boil or quick

reheating) could be automatically limited, in order to prevent the

selected limit from being exceeded.

To set the power of the cooktop:

Once you have connected the device to the mains power supply,

you can set the power level within 60 seconds.

Press the timer “+” button for at least 5 seconds. The display

shows

Press the “ ” button until the last power level selected

appears. Use the “+” and “−” buttons to select the desired power

level. The power levels available are: 4 kW, 6 kW, 7 kW - 9 kW,

11kW.

Conrm by pressing “ ”

The power level selected will stay in the memory even if the

power supply is interrupted.

To change the power level, turn your wall breaker power to the

cooktop off for at least 60 seconds, then turn the power back on

and repeat the steps above.

If an error occurs during the setting sequence, the “ ” symbol

will appear, and you will hear a beep. If this happens, repeat the

operation. If the error persists, contact the After-Sales Service.

Induction Ready Cookware

POTS AND PANS

Only use pots and pans made from

ferromagnetic material which are suitable for

use with induction cooktop:

■Enameled steel

■Cast iron

■Stainless steel designed for induction

cooking

To determine whether a pot is suitable, a magnet may be used to

check whether pots are magnetic.

The quality and the structure of the pot base can alter cooking

performance. Some indications for the diameter of the base

do not correspond to the actual diameter of the ferromagnetic

surface.

Some pots and pans have only a part of the bottom in

ferromagnetic material, with parts in another material that is not

suitable for induction cooking. These areas may heat up at

different levels or with lower temperatures. In certain cases,

where the bottom is made mainly of non-ferromagnetic materials,

the cooktop might not recognize the pan and therefore not switch

on the cooking zone.

To ensure optimum efciency, always use pots and pans with a

at bottom that distributes the heat evenly. If the bottom is

uneven, this will affect power and heat conduction.

Empty pots or pots with a thin base

Do not use empty pots or pans when the cooktop is on.

Proper size of pot/pan base for the different cooking areas

To ensure that the cooktop functions properly, use pots of a

suitable minimum diameter.

Always use the cooking zone that best corresponds to the

diameter of the bottom of the pot.

Place the pot making sure it is well centered on the cooking zone

in use. Use cookware about the same size as the surface cooking

area. Cookware should not extend more than 1/2" (1.3 cm)

outside the area.

NOOK

A. 4" (10.2 cm) minimum

B. 43⁄4" (12 cm) minimum

C. 83/4" (22.2 cm) minimum

A. Surface cooking area

B. Cookware/canner

C. 1/2" (1.3 cm) Maximum

overhang

Daily Use

POSITIONING

Do not cover the control panel symbols with the cooking pot.

NOTE: In the cooking zones close to the control panel, it is

advisable to keep pots and pans inside the markings (taking both

the bottom of the pan and the upper edge into consideration, as

this tends to be larger).

This prevents excessive overheating of the keypad. When grilling

or frying, please use the rear cooking zones.

NOTE: Do not set any items on the control panel at any time.

To Use:

Press “ON/OFF” for at least one second to turn on the desired

cooking zone. A dot light and a dash (“-”) will be shown on display.

Press the “+” or “−” button of the required cooking zone to adjust

the power.

At rst the level “5” will be shown in line with the area.

The Boost function is reached by pressing the power level button

until the letter “P” is shown in the digit display. The boost can be

activated on all zones.

To deactivate the cooking zones:

Select the “ON/OFF” button of the cooking zone desired.

CONTROL PANEL LOCK

To lock the settings and prevent it from being switched on

unintentionally, press and hold the “Control Lock” button for

3seconds. A beep and an indicator light above the symbol

indicate that this function has been activated. The control panel is

locked except “ON/OFF” of each cooking zone.

To unlock the controls, repeat the activation procedure.

TIMER

The cooktop has a Timer. The Timer can be set in minutes up to

99 minutes.

To Use Timer:

1. Press “+” button to select the desired time.

NOTE: Press and hold the “+” or “-” buttons for a few seconds

to quickly scroll through the time.

2. After releasing the button, the timer countdown will start in

3 seconds.

3. If needed to adjust the time, press “+” button to increase the

time or “-” button to decrease the time.

4. When countdown is over, timer tone will sound. The display

will indicate “00” and chime will play.

Then the display will turn off.

To Cancel:

Press “-” button until display shows “00” or press simultaneously

“-” and “+”.

WARNING

Fire Hazard

Turn off all controls when done cooking.

Failure to do so can result in death or fire.

Functions

EXTENDABLE ZONE (DOUBLE ZONE)

Depending on the diameter of the container, the zone adapts itself

automatically, turning on partially (inner zone) or completely (outer

zone). For more information, refer to the minimum diameter table.

IMPORTANT: Place the pot making sure that its center

corresponds to the center of the cooking zone in use.

AUTO

The “Auto” button activates the auto cooking functions. Place the

pot in position and turn on the cooking zone. Press the “Auto”

button. “A” will appear on the display.

The indicator for the rst special feature available for the cooking

zone start to blink and to move it to the second one press another

time “Auto”.

If no button is pressed the function is activated automatically after

three seconds.

The power level is not editable. The cooktop sets a default power

level.

To deactivate the special functions, press “ON/OFF” or press

“Auto” until see a dash “-” is visible on the display.

MELT

This function allows you to bring food to the ideal temperature for

melting and to maintain the condition of the food. This method

does not damage delicate foods such as chocolate, and helps

prevent food sticking to the pot/pan.

SIMMER

This function is ideal for maintaining a simmering temperature,

allowing you to cook food for long periods with no risk of burning.

Ideal for long-cooking recipes (rice, sauces, roasts) with liquid

base.

A. Single size

B. Dual size

Auto

A. Single Size

B. Dual Size

Auto

BOIL

This function allows you to bring water to the boil and keep it

boiling. The water (preferably at room temperature) should be

placed in the pot, and left uncovered. In all cases, users are

advised to monitor the boiling water closely, and check the

amount of water remaining regularly. The quantity of the water is

dened in the image below on the dimension of the burner.

IMPORTANT:

■It is important to match the size of the pan to the size of the

cooking zone.

■Using pots/pans of the incorrect size or poorly positioning

pans on the cooking zone may cause limited activation of the

sensors.

■Pots/pans from other manufacturers may not perform

well. They may heat to a temperature above or below the

programmed temperature setting. If using a pan that is not

the recommended accessory, monitor your cooking process

closely and switch to a manual mode if necessary.

■Your unit has a built in feature to shut itself off during over

voltage conditions, water spillage on the touch control, empty

pan, or for extended cooking durations. If this occurs, you may

turn the burner back on and resume cooking without issue.

■Always keep the pot/pan centered on the element.

■It is recommended to leave the accessory stationary during the

heating phase in order to obtain a more accurate control.

■Always wait for the acoustic warning before inserting the food

and start from cold only with any seasoning.

■In case of repeated cooking, it is advisable not to turn off the

automatic function, but to continue cooking, letting the control

maintain the correct temperature.

■If possible, avoid using the assisted cooking functions when

the letter “H” is present, which means the element is still hot.

Let the element cool down before using this function again.

Auto

A. 2 cups (0.5 L)

B. 8 cups (2 L)

C. 21 cups (5 L)

Indicators

POT INCORRECTLY POSITIONED OR MISSING

This symbol appears if the pot is not suitable for induction

cooking, is not positioned correctly or is not of an appropriate size

for the cooking zone selected. If no pot is detected within

30 seconds of making the selection, the cooking zone switches

off.

RESIDUAL HEAT

If “H” appears on the display,this means that the cooking zone

is hot. The indicator lights up even if the zone has not been

activated but has been heated due to the use of the adjacent

zones, or because a hot pot has been placed on it.

When the cooking zone has cooled down, the “H” disappears.

Cooking Table

POWER LEVEL TYPE OF COOKING LEVEL USE

(indicating cooking experience and habits)

Maximum

power

Boost Fast heating Ideal for rapidly increasing the temperature of food to fast boiling in the

case of water or rapidly heating cooking liquids.

8 − 9 Frying − boiling Ideal for browning, starting to cook, frying deep frozen products, fast

boiling.

High power

7 − 8 Browning − sautéing − boiling

− grilling Ideal for sautéing, maintaining a lively boil, cooking and grilling (for a

short period of time, 5-10 minutes).

6 − 7 Browning − cooking − stewing

− sautéing − grilling Ideal for sautéing, maintaining a light boil, cooking and grilling (for a

medium period of time, 10-20 minutes), preheating accessories.

Medium

power

4 − 5 Cooking − stewing − sautéing

− grilling Ideal for stewing, maintaining a gentle boil, cooking (for a long period of

time), Creaming pasta.

3 − 4 Cooking − simmering −

thickening − creaming

Ideal for long-cooking recipes (rice, sauces, roasts, sh) with liquids

(e.g. water, wines, broth, milk), creaming pasta.

2 − 3 Ideal for long-cooking recipes (less than 4 cups [1 L] in volume: rice,

sauces, roasts, sh) with liquids (e.g. water, wines, broth, milk).

Low power

1 − 2 Melting − defrosting − keeping

food warm − creaming

Ideal for softening butter, gently melting chocolate, thawing small

products and keeping just-cooked food warm (e.g. sauces, soups,

minestrone).

1Ideal for keeping just-cooked food warm, for creaming risottos and for

keeping serving dishes warm (with induction-suitable accessory).

Zero power OFF Support surface Cooktop in stand-by or off mode (possible end-of-cooking residual

heat, indicated by an “H”).

Assisted Cooking Table

TYPE OF COOKING DESCRIPTION

Boiling Ideal for boiling pasta, rice, vegetables, meats and sh.

Frying Ideal for stir frying vegetables, meat/steaks, sh, or to pan fry with oil (e.g. French fries).

Grilling Ideal for cooking with griddle and preparing meat, sh or vegetables.

Ceramic Glass

Cleaning off the induction cooktop before and after each use will

help keep it free from stains and provide the most even heating.

For more information, see the “General Cleaning” section.

Avoid storing jars or cans above the cooktop. Dropping

a heavy or hard object onto the cooktop could crack the

cooktop.

To avoid damage to the cooktop, do not leave a hot lid on

the cooktop. As the cooktop cools, air can become trapped

between the lid and the cooktop, and the ceramic glass could

break when the lid is removed.

For foods containing sugar in any form, clean up all spills and

soils as soon as possible. Allow the cooktop to cool down

slightly. Then, while wearing oven mitts, remove the spills

while the surface is still warm. If sugary spills are allowed to

cool down, they can adhere to the cooktop and can cause

pitting and permanent marks.

To avoid scratches, do not slide cookware or bakeware

across the cooktop.

To avoid damage to the cooktop, do not allow objects that

could melt, such as plastic or aluminum foil, to touch any part

of the entire cooktop.

To avoid damage to the cooktop, do not use the cooktop as a

cutting board.

Use at-bottomed cookware for best heat conduction and

energy efciency. Cookware with rounded, warped, ribbed

or dented bottoms could cause uneven heating and poor

cooking results.

Determine atness by placing the straight edge of a ruler

across the bottom of the cookware. While you rotate the

ruler, no space or light should be visible between it and the

cookware.

Make sure the bottoms of pots and pans are clean and dry

before using them. Residue and water can leave deposits

when heated.

COOKTOP CARE

General Cleaning

IMPORTANT: Before cleaning, make sure all controls are off and

the cooktop is cool. Always follow label instructions on cleaning

products.

Soap, water, and a soft cloth or sponge are suggested rst,

unless otherwise noted.

Do not use a steam cleaner.

CERAMIC GLASS

Cleaning Method:

To avoid damaging the cooktop, do not use steel wool, abrasive

powder cleansers, chlorine bleach, rust remover, or ammonia.

■For best results, turn on control lock option to prevent the

control panel from turning on while cleaning.

1. Remove food/residue with the Cooktop Scraper.

■For best results, use the Cooktop Scraper while the

cooktop is still warm but not hot to the touch. It is

recommended to wear an oven mitt while scraping the

warm cooktop.

■Hold the Cooktop Scraper at approximately a 45° angle

against the glass surface and scrape the residue. It will

be necessary to apply pressure in order to remove the

residue.

Allow the cooktop to cool down completely before proceeding to

Step 2.

2. Apply a few dime-sized drops of affresh® Cooktop Cleaner to

the affected areas.

■Rub affresh® Cooktop Cleaner onto the cooktop surface

with the blue Cooktop Cleaning Pad. Some pressure is

needed to remove stubborn stains.

■Allow the cleaner to dry to a white haze before proceeding

to Step 3.

3. Polish with a clean, dry cloth or a clean, dry paper towel.

■Repeat steps 1 through 3 as necessary for stubborn or

burned-on stains.

The Complete Cooktop Cleaner Kit is available for order and

includes the following:

■Cooktop Scraper

■Affresh® Cooktop Cleaner

■Blue Cooktop Cleaning Pads

See the “Accessories” section for part numbers and information

on ordering.

NOTE: During the cleaning process, if the control lock is not

activated, some keys may turn on. Activate the control lock

function to avoid this.

Do not place any objects on the control panel at any time.

STAINLESS STEEL (on some models)

To avoid damage to stainless steel surfaces, do not use

soap-lled scouring pads, abrasive cleaners, cooktop cleaner,

steelwool pads, gritty washcloths, or abrasive paper towels.

Rub in direction of grain to avoid damaging.

Cleaning Method:

■All purpose cleaner:

Rinse with clean water and dry with soft, lint-free cloth.

■Vinegar for hard water spots.

NOTE: During the cleaning process, if the control lock is not

activated, some keys may turn on. Activate the control lock

function to avoid this. Do not place any objects on the control

panel at any time.

TROUBLESHOOTING

Try the solutions suggested here rst in order to avoid the cost of an unnecessary service call.

Nothing will operate

■Is the cooktop wired properly? See the Installation

Instructions for more information.

■Has a household fuse blown, or has a circuit breaker

tripped? Replace the fuse or reset the circuit breaker. If the

problem continues, call an electrician.

Cooktop will not operate

■Is the cooktop control set correctly? Touch the display

area on the control panel to select a cooking surface before

selecting a function.

■Is the “Control Lock” Cooktop Lockout set? See “Control

Lock” section.

■Has the cooktop turned off by itself? The power off key was

unintentionally touched. Press power key again. Reset the

cooktop.

Excessive heat around cookware on cooktop

■Is the cookware the proper size? Use cookware about the

same size as the surface cooking area. Cookware should not

extend more than 1/2" (1.3 cm) outside the cooking area.

Cooktop cooking results not what expected

■Is the proper cookware being used? See “Cookware”

section.

■Is the cooktop control set to the proper heat level? See

“Function” section.

■Is the cooktop level? Level the cooktop. See the Installation

Instructions.

Display shows messages

■Is the display ashing “F” and numbers? If “F” and a

number are alternately ashing on the display, refer to the

following table for possible solutions.

DISPLAY CODE DESCRIPTION POSSIBLE CAUSES SOLUTION

F0E1 Cookware is detected but it is

not compatible with requested

operation.

The cookware is not well positioned

on the cooking zone, or it is not

compatible with one or more

cooking zones.

Press On/Off button twice to remove

the F0E1 code and restore the

functionality of the cooking zone.

Then, try to use the cookware with

a different cooking zone, or use

different cookware.

F0E7 Wrong power cord connection. The power supply connection is not

exactly as indicated in “Installation”

paragraph.

Adjust the power supply connection

according to “Installation Instruction”

paragraph.

F0EA The control panel switches off

because of excessively high

temperatures.

The internal temperature of

electronic parts is too high. Wait for the cooktop to cool down

before using it again.

F0E2, F0E4, F0E6,

F0E8, F0EC, F1E1,

F6E1, F7E5, F7E6

Disconnect the cooktop from the power supply.

Wait a few seconds then reconnect the cooktop to the power supply.

If the problem persists, call the service center and specify the error code that appears on the display.

e.g. The cooktop does not allow a

special function to be activated. The power regulator limits the

power levels in accordance with the

maximum value set for the cooktop.

See paragraph “Power management”.

e.g.

[Power level

lower than level

requested]

The cooktop automatically sets

a minimum power level to ensure

that the cooking zone can be

used.

The power regulator limits the

power levels in accordance with the

maximum value set for the cooktop.

See paragraph “Power management”.

BOILIN

Operational cooktop sounds

■Is there a low humming? This occurs when cooking at high

power. The cause of this is the amount of energy that is

transmitted from the appliance to the cookware. This sound

will quiet or go away when the power is turned down.

■Is there a crackling? This sound occurs when cookware is

used that consists of different materials. The noise is caused

by vibrations in the joint faces between the different layers. It

may change depending on the amount and type of food being

cooked.

■Is there a fan noise? The electronics require a controlled

temperature in order to function reliably. The cooktop is

tted with a fan that runs at various speeds according to the

temperature detected. The fan may also continue to run even

after the cooktop has been switched off, if the temperature it

detects is too high.

ASSISTANCE OR SERVICE

Before calling for assistance or service, please check

“Troubleshooting”. It may save you the cost of a service call. If

you still need help, follow the instructions below.

When calling, please know the purchase date and the complete

model and serial number of your appliance. This information will

help us to better respond to your request.

If you need replacement parts

If you need to order replacement parts, we recommend that you

use only factory specied parts. These factory specied parts

will t right and work right because they are made with the same

precision used to build every new JennAir appliance.

To locate factory specied parts in your area, call us or your

nearest JennAir designated service center.

In the U.S.A.

Call the Customer eXperience Center toll-free: 1-800-JENNAIR

(1-800-536-6247).

Our consultants provide assistance with:

■Features and specications on our full line of appliances.

■Installation information.

■Use and maintenance procedures.

■Accessory and repair parts sales.

■Specialized customer assistance (Spanish speaking, hearing

impaired, limited vision, etc.).

■Referrals to local dealers, repair parts distributors and

service companies. JennAir designated service technicians

are trained to fulll the product warranty and provide after-

warranty service anywhere in the United States.

To locate the JennAir designated service company in your area,

you can also look in your telephone directory Yellow Pages.

For further assistance

If you need further assistance, you can write to JennAir with any

questions or concerns at:

JennAir Brand Home Appliances

Customer eXperience Center

553 Benson Road

Benton Harbor, MI 49022-2692

Please include a daytime phone number in your correspondence.

In Canada

Call the JennAir Canada LP Customer eXperience Centre

toll-free: 1-800-JENNAIR (1-800-536-6247).

Our consultants provide assistance with:

■Features and specications on our full line of appliances.

■Use and maintenance procedures.

■Accessory and repair parts sales.

■Referrals to local dealers, repair parts distributors and

service companies. JennAir designated service technicians

are trained to fulll the product warranty and provide after-

warranty service anywhere in Canada.

For further assistance

If you need further assistance, you can write with any questions

or concerns at:

JennAir Brand Home Appliances

Customer eXperience Centre

200 - 6750 Century Ave.

Mississauga, ON L5N 0B7

Please include a daytime phone number in your correspondence.

Accessories

Affresh® Cooktop Cleaner

(ceramic glass models)

Order Part Number W10355051

Cooktop Protectant

(ceramic glass models)

Order Part Number 31463

Cooktop Scraper

(ceramic glass models)

Order Part Number WA906B

Affresh® Stainless Steel Cleaner

(stainless steel models)

Order Part Number W10355016

Affresh® Kitchen and Appliance Cleaner

Order Part Number W10355010

Notes

Guide d’utilisation et d’entretien

Pour des questions à propos des caractéristiques, du fonctionnement/rendement, des pièces, accessoires, garantie ou dépannage,

composer le: 1800JENNAIR (1800536-6247) ou visiter notre site Web au www.jennair.com.

Au Canada, composer le: 1800JENNAIR (1800536-6247), ou visiter notre site Web au www.jennair.ca.

TABLE DE CUISSON À INDUCTION AVEC

COMMANDES ÉLECTRONIQUES TACTILES

DE30PO (78,2CM) JENNAIR®

SÉCURITÉ DE LA TABLE DE CUISSON

TABLE DES MATIÈRES

SÉCURITÉ DE LA TABLE DE CUISSON ....................................15

PIÈCES ET CARACTÉRISTIQUES –

COMMANDES TACTILES ...........................................................19

Ustensiles pour cuisson par induction ......................................20

Première utilisation .....................................................................20

Utilisation quotidienne ................................................................21

Fonctions ....................................................................................21

Témoins ......................................................................................22

Tableau de cuisson ....................................................................23

Tableau pour la cuisson assistée ............................................... 23

Vitrocéramique ...........................................................................23

ENTRETIEN DE LA TABLE DE CUISSON ..................................24

Nettoyage général ......................................................................24

DÉPANNAGE .................................................................................25

ASSISTANCE OU DÉPANNAGE ..................................................26

Aux É.-U. ....................................................................................26

Au Canada ..................................................................................26

Accessoires ................................................................................26

Risque possible de décès ou de blessure grave si vous ne

suivez pas immédiatement les instructions.

Risque possible de décès ou de blessure grave si vous

ne suivez pas les instructions.

Tous les messages de sécurité vous diront quel est le danger potentiel et vous disent comment réduire le risque de blessure et

ce qui peut se produire en cas de non-respect des instructions.

Votre sécurité et celle des autres est très importante.

Nous donnons de nombreux messages de sécurité importants dans ce manuel et sur votre appareil ménager. Assurez-vous de

toujours lire tous les messages de sécurité et de vous y conformer.

AVERTISSEMENT

DANGER

Voici le symbole d’alerte de sécurité.

Ce symbole d’alerte de sécurité vous signale les dangers potentiels de décès et de blessures graves à vous

et à d’autres.

Tous les messages de sécurité suivront le symbole d’alerte de sécurité et le mot “DANGER” ou

“AVERTISSEMENT”. Ces mots signifient :

IMPORTANTES INSTRUCTIONS DE SÉCURITÉ

CONSERVEZ CES INSTRUCTIONS

AVERTISSEMENT : Pour réduire le risque d'incendie, de

choc électrique, de blessures ou de dommages lors de

l'utilisation de la table de cuisson, observer les précautions

élémentaires suivantes, y compris ce qui suit :

AVERTISSEMENT : Risque d’incendie : Ne pas ranger

d’objets sur les surfaces de cuisson. Ne jamais rien laisser

sur la surface lorsqu’elle est laissée sans surveillance et

qu’elle n’est pas utilisée. Ne jamais placer d’objets

inflammables ou en plastique sur ou à proximité de la

surface.

MISE EN GARDE : Ne pas remiser dans les armoires

au-dessus d'une table de cuisson, des articles que des

enfants pourraient vouloir atteindre. Les enfants pourraient

se brûler ou se blesser en grimpant sur la table de cuisson.

Installation conforme – L’appareil, lors de son installation,

doit être correctement relié à la terre en conformité avec les

codes locaux en vigueur, ou en l’absence de tels codes,

avec le National Electrical Code, ANSI/NFPA 70 ou le Code

canadien des installations électriques, CSA C22.1-02. Au

Canada, l’appareil doit être relié à la terre en respectant le

Code canadien de l’électricité. S’assurer que l’appareil est

bien installé et que la mise à la terre est réalisée par un

technicien qualifié.

Ne jamais utiliser la table de cuisson pour réchauffer ou

chauffer la pièce.

Il faut faire attention de ne pas laisser le papier aluminium et

la sonde de cuisson entrer en contact avec les éléments

chauffants.

Ne pas laisser les enfants seuls – Les enfants ne doivent

pas être laissés seuls ou sans surveillance dans la pièce où

la table de cuisson est en service. Ne jamais laisser les

enfants s’asseoir ou se tenir sur une partie quelconque de la

table de cuisson.

Porter des vêtements appropriés – Des vêtements amples

ou détachés ne doivent jamais être portés pendant

l’utilisation de la table de cuisson.

Entretien par l’utilisateur – Ne pas réparer ou remplacer

toute pièce de la table de cuisson si ce n’est pas

spécifiquement recommandé dans le manuel. Toute autre

opération d’entretien ou de réparation doit être confiée à un

technicien qualifié.

Ne pas utiliser de pièces de remplacement qui n’ont pas été

recommandées par le fabricant (c.-à-d., des pièces

fabriquées à la maison à l’aide d’une imprimante 3D).

Ne pas utiliser d’eau sur un feu de graisse – Étouffer le feu

ou la flamme ou utiliser un extincteur à produits chimiques

secs ou à mousse.

N’utiliser que des mitaines de four sèches – Des mitaines de

four mouillées ou humides sur des surfaces chaudes

peuvent provoquer des brûlures provenant de la vapeur. Ne

pas laisser les mitaines de four toucher les éléments

chauffants. Ne pas utiliser une serviette ou autre tissu épais.

NE PAS TOUCHER LES ÉLÉMENTS À LA SURFACE OU

L’ESPACE PRÈS DES ÉLÉMENTS – Les éléments de

surface peuvent être chauds même lorsqu’ils ont une teinte

foncée. Les endroits près des éléments à la surface

peuvent devenir assez chauds pour provoquer des brûlures.

Pendant et après l’utilisation, ne pas toucher les éléments

chauffants et ne pas laisser les vêtements ou autres

matériaux inflammables entrer en contact avec ces

éléments de surface ou les endroits près des éléments,

avant qu’ils soient suffisamment refroidis. Ces endroits

comprennent la table de cuisson et les surfaces près de la

table de la cuisson.

Utiliser des ustensiles de format approprié – La table de

cuisson est munie d’un ou de plusieurs éléments chauffants

de différentes grandeurs. Choisir les ustensiles qui ont un

fond plat assez grand pour couvrir l’élément chauffant de la

surface de cuisson. L’utilisation d’ustensiles trop petits

exposera une partie de l’élément chauffant, ce qui peut

provoquer l’inflammation des vêtements. L’utilisation d’un

récipient de format correct améliore l’efficacité de la

cuisson.

Ne jamais laisser les éléments de la table de cuisson sans

surveillance alors qu’ils chauffent à la puissance maximale –

Il pourrait en résulter une ébullition qui cause de la fumée et

des renversements de corps gras qui peuvent s’enflammer.

Ustensiles de cuisson vitrifiés – Seulement certains types

d’ustensiles de verre, vitrocéramique, céramique, faïence ou

autres surfaces vitrifiées conviennent pour le service sur

une table de cuisson, sans bris attribuables aux

changements soudains de température.

Les poignées des ustensiles doivent être tournées vers

l’intérieur et non vers le dessus des éléments adjacents –

Pour réduire les risques de brûlures, d’inflammation de

produits combustibles et de renversements dus à

l’entrechoquement non intentionnel des ustensiles, la

poignée d’un ustensile doit être positionnée de sorte qu’elle

est tournée vers l’intérieur et non au-dessus des éléments

de surface adjacents.

Ne pas faire cuire sur une table de cuisson endommagée –

Si la table de cuisson est brisée, les solutions de nettoyage

et les renversements peuvent pénétrer dans la table brisée

et créer le risque d’un choc électrique. Contacter

immédiatement un technicien qualifié. Éteindre l’appareil

pour éviter le risque d’une décharge électrique.

Ne pas faire chauffer un contenant qui n’a pas été ouvert –

L’accumulation de pression pourrait faire éclater le

contenant et causer des blessures.

Nettoyer la table de cuisson avec prudence – Si une

éponge ou un chiffon mouillé est utilisé pour essuyer les

renversements sur une surface de cuisson chaude, éviter

les brûlures causées par la vapeur chaude. Certains

nettoyants peuvent produire des émanations désagréables

lorsqu’ils sont utilisés sur une surface chaude.

Cette table de cuisson à induction génère et utilise une énergie de fréquence ISM qui chauffe l’ustensile de cuisson à l’aide d’un champ

électromagnétique. Elle a été testée et déclarée conforme à la section18 du règlement FCC pour l’équipement ISM. Cette table de

cuisson à induction satisfait aux exigences du règlement FCC pour la réduction des interférences avec d’autres dispositifs résidentiels.

Cette table de cuisson à induction peut causer des interférences pour la réception de la télévision et de la radio. En cas d’interférence,

l’utilisateur doit essayer d’y remédier enprenant une ou plusieurs des mesures suivantes:

Changer l’orientation de l’antenne de réception de la radio ou de la télévision.

Éloigner la table de cuisson du récepteur.

Brancher le récepteur dans une prise différente.

Il incombe à l’utilisateur de corriger toute interférence.

REMARQUE: Les personnes utilisant un stimulateur cardiaque ou un dispositif médical similaire doivent prendre leurs précautions

lorsqu’elles se trouvent à proximité d’une table de cuisson à induction allumée. Le champ électromagnétique peut affecter le

fonctionnement du stimulateur cardiaque ou de tout dispositif similaire. Consultez votre médecin ou le fabricant du stimulateur

cardiaque ou du dispositif médical pour obtenir des informations supplémentaires à propos de ses effets en présence des champs

magnétiques émis par la table de cuisson à induction.

Ce dispositif est conforme à la section 18 des règlements FCC.

Ce dispositif est conforme à la norme ICES-001 d’Industrie Canada.

IMPORTANTES INSTRUCTIONS DE SÉCURITÉ

CONSERVEZ CES INSTRUCTIONS

Pour les appareils avec hotte de ventilation –

Nettoyer les hottes de ventilation fréquemment – La

graisse ne doit pas s’accumuler sur la hotte ou le filtre.

Lorsque vous flambez des aliments sous la hotte, mettre le

ventilateur en marche.

Pour les appareils à éléments en spirale –

S’assurer que les cuvettes de propreté sont en place –

L’absence de ces cuvettes au cours de la cuisson peut

causer des dommages aux fils ou aux composants en

dessous des éléments.

Garnissages protecteurs – Ne pas recouvrir les cuvettes

de papier d’aluminium sauf tel que suggéré dans le

manuel. L’installation incorrecte de papier d’aluminium ou

autre matériau peut causer un risque de choc électrique ou

d’incendie.

Ne pas tremper les éléments de chauffage amovibles –

Les éléments de chauffage ne doivent jamais être

immergés dans l'eau.

Pour les appareils avec l’éléments à induction –

Ne pas placer d’objets en métal comme un couteau, une

fourchette, une cuillère ou un couvercle sur la surface de

cuisson, ils pourraient devenir chauds.

PIÈCES ET CARACTÉRISTIQUES – COMMANDES TACTILES

Table de cuisson

Modèle à commande électronique tactile de 30po (78,2cm)

1. Table de cuisson

2. Tableau de commande

Tableaux de commande

Modèles à commande électronique tactile de 30po (78,2cm)

4 6 82 5 9 10

1. Identication de la zone de cuisson

2. Bouton ON/OFF (marche/arrêt) de la

zone de cuisson

3. Témoin de fonction activée

4. Bouton de fonction de cuisson par

détection automatique

5. Niveau de cuisson sélectionné

6. Bouton Key lock (Verrouillage des

touches) – 3 secondes

7. Bouton de fonction de cuisson par

détection automatique

8. Bouton de réglage de la puissance

9. Boutons Timer (minuterie)

10. Indicateur de minuterie

11. Activation des fonctions spéciales

Première utilisation

GESTION DE PUISSANCE

Au moment de l’achat, la table de cuisson est réglée à 9kW.

Modier le réglage en fonction des limites du système électrique

de votre maison, comme décrit dans le paragraphe suivant.

REMARQUE: Selon la puissance sélectionnée pour la table

de cuisson, certains des niveaux de puissance et certaines des

fonctions (p. ex., faire bouillir ou réchauffage rapide) des zones de

cuisson peuvent être automatiquement limités pour prévenir de

dépasser la limite sélectionnée.

Réglage de la puissance de la table de cuisson:

Après avoir branché l’appareil à l’alimentation principale, il est

possible de régler le niveau de puissance dans les 60 secondes.

Appuyer sur le bouton « + » de la minuterie pendant au moins

5secondes. L’écran afche

Appuyer sur le bouton « » jusqu’à ce que le plus récent

niveau de puissance sélectionné s’afche. Utiliser les boutons

« + » et « -» pour sélectionner le niveau de puissance désiré.

Lesniveaux de puissances accessibles sont: 4kW, 6kW, 7kW,

9kW, 11kW.

Conrmer en appuyant sur « ».

Le niveau de puissance sélectionné est conservé dans la

mémoire, même en cas d’interruption de l’alimentation.

Pour modier le niveau de puissance, fermer le disjoncteur

alimentant le circuit de la table de cuisson pendant au moins

60 secondes, puis alimenter de nouveau la table de cuisson et

effectuer les étapes précédentes.

Si une erreur se produit pendant la séquence de conguration,

lesymbole « » s’afchera et une tonalité retentira. Si cette

situation se produit, répéter l’opération. Si l’erreur persiste,

communiquer avec le service après-vente.

Ustensiles pour cuisson par induction

CASSEROLES ET POÊLES

Il ne faut utiliser que des casseroles et poêles

fabriquées de matière ferromagnétique

conçue à l’usage des tables de cuisson

parinduction:

■Acier émaillé

■Fonte

■Acier inoxydable conçu pour la cuisson

par induction

Pour savoir si une casserole convient, un aimant peut être placé

sous l’ustensile pour vérier s’il est magnétique.

La qualité et la structure du fond de la casserole peuvent avoir

une incidence sur le rendement de cuisson. Certaines indications

du diamètre du fond ne correspondent pas au diamètre réel de la

surface ferromagnétique.

Certaines casseroles et poêles ne possèdent qu’une partie de

leur fond fabriquée en matière ferromagnétique, l’autre partie est

fabriquée dans une matière qui ne convient pas pour la cuisson

par induction. Ces zones peuvent chauffer à des niveaux

différents ou à une température inférieure. Dans certaines

situations, lorsque le fond est fabriqué principalement de matière

qui n’est pas ferromagnétique, la table de cuisson peut ne pas

reconnaître l’ustensile, ce qui préviendra la mise en marche de

lazone de cuisson.

Pour assurer une efcacité optimale, utiliser toujours des

casseroles et poêles avec fond plat qui chauffe de façon

uniforme. Un fond qui n’est pas plat aura une incidence sur

lapuissance et la conduction de la chaleur.

Casseroles vides ou à fond mince

N’utilisez pas une casserole ou une poêle vide lorsque la table de

cuisson est en marche.

Taille appropriée de la base de casserole/casserole pour les

différentes zones de cuisson

Pour assurer un fonctionnement adéquat de la table de cuisson,

utiliser des casseroles dont le diamètre est convenable.

Toujours utiliser la zone de cuisson qui correspond au diamètre

du fond de la casserole.

Placer la casserole en s’assurant qu’elle est bien centrée sur la

zone de cuisson utilisée. Utiliser des ustensiles de cuisson de la

même taille environ que la surface de cuisson. L’ustensile de

cuisson ne doit pas dépasser de plus de 1/2 po (1,3 cm) hors de

la zone de cuisson.

NOOK

A. Zone de cuisson de la

surface

B. Ustensiles de cuisson/

autoclave

C. Dépassement maximum de

1/2 po (1,3 cm)

A. 4 po (10,2 cm) minimum

B. 4 3⁄4 po (12 cm) minimum

C. 8 3/4 po (22,2 cm) minimum

La page est en cours de chargement...

JennAir W11362913C Manuel utilisateur

Marque: JennAir

Modèle: W11362913C

Catégorie: Fours

Taper: Manuel utilisateur

Télécharger le PDF

rapport

dans d''autres langues

English: JennAir W11362913C User manual

JennAir W11362913C Manuel utilisateur

JennAir W11362913C Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents