Gaggenau VI 492 611 Use & Care

*DJJHQDX

Use and care manual 3

Notice d’utilisation 36

VI 492 611

Cooktop

Surface de cuisson

2

9,

[

[





[

[

3

en-us

Table of Contents

Use and care manual

Safety Definitions 4

IMPORTANT SAFETY INSTRUCTIONS 5

Fire Safety 5

Cooking Safety 6

Burn Prevention 7

Child Safety 8

Cleaning Safety 8

Cookware Safety 8

Proper Installation and Maintenance 9

Electromagnetic interference 10

Cooling fan 10

State of California Proposition 65 Warnings 10

Causes of damage 11

Overview 11

Protecting the environment 12

Energy-saving advice 12

Cooking with Induction 12

Advantages of induction cooking 12

Cookware 12

Getting to know your appliance 14

Control panel 14

Control Knob 15

Elements 15

Residual Heat Indicator 15

Special Accessories 16

Operating the appliance 16

Setting a Burner 16

Chef's recommendations 17

Wok Function 18

Wok and Wok Accessories 18

Cooking with the Wok 18

Activate 19

Deactivate 19

Table 19

Flexible Cooking Zone 20

Cookware use recommendations 20

As two independent elements 20

As a single element 20

Timer functions 21

The kitchen timer 21

Count-up timer function 21

PowerBoost Feature 22

Activate 22

Deactivate 22

Safety shut-off 22

Frying Sensor 23

Advantages when frying 23

Frying Pans for the Frying Sensor 23

Temperature settings 23

Frying chart 24

Setting procedure 26

Locking the Control Panel for Cleaning 26

Automatic Safety Switch-off Function 26

Basic settings 27

To access the basic settings: 27

Cleaning and Maintenance 28

Daily Cleaning 28

Cleaning guidelines 29

Cleaning chart 29

Maintenance 30

FAQ 31

What to Do in the Event of a Fault? 33

Demo Mode 34

Suitability test of cookware 34

Customer service 35

Additional information on products, accessories,

replacement parts and services can be found at

www.gaggenau.com and in the online shop

www.gaggenau.com/zz/store

4

en-us

Safety Definitions

9 WARNING

This indicates that death or serious injuries may

occur as a result of non-observance of this

warning.

9 CAUTION

This indicates that minor or moderate injuries may

occur as a result of non-observance of this

warning.

NOTICE

This indicates that damage to the appliance or property

may occur as a result of non-compliance with this

advisory.

Note: This alerts you to important information and/or

tips.

5

9 IMPORTANT SAFETY INSTRUCTIONS

READ AND SAVE THESE INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS

READ AND SAVE THESE INSTRUCTIONS

9 WARNING

When properly cared for, your new

appliance has been designed to be

safe and reliable. Read all

instructions carefully before use.

These precautions will reduce the

risk of burns, electric shock, fire,

and injury to persons. When using

kitchen appliances, basic safety

precautions must be followed,

including those in the following

pages.

Examine the appliance after unpacking it.

In the event of transport damage, do not

plug it in.

Fire Safety

Do not allow aluminum foil, plastic, paper

or cloth to come in contact with a hot

surface element, burner or grate. Do not

allow pans to boil dry.

If the cooktop is near a window, forced air

vent or fan, be certain that flammable

materials such as window coverings do

not blow over or near the burners or

elements. They could catch on fire.

Always have a working smoke detector

near the kitchen.

Never leave the cooktop unattended when

in use. Boilovers cause smoking and

greasy spillovers may ignite.

9 WARNING

TO REDUCE THE RISK OF A

GREASE FIRE:

1. Never leave surface units

unattended at high settings.

Boilovers cause smoking and

greasy spillovers that may ignite.

Heat oils slowly on low or medium

settings.

2. Always turn hood ON when

cooking at high heat or when

flambeing food (i.e. Crepes

Suzette, Cherries Jubilee,

Peppercorn Beef Flambé).

3. Clean ventilating fans frequently.

Grease should not be allowed to

accumulate on fan or filter.

4. Use proper pan size. Always use

cookware appropriate for the size

of the surface element.

In the event that personal clothing or hair

catches fire, drop and roll immediately to

extinguish flames.

Have an appropriate fire extinguisher

available, nearby, highly visible and easily

accessible near the appliance.

Smother flames from food fires other than

grease fires with baking soda. Never use

water on cooking fires.

9 IMPORTANT SAFETY INSTRUCTIONS

READ AND SAVE THESE INSTRUCTIONS

6

9 WARNING

TO REDUCE THE RISK OF INJURY

TO PERSONS IN THE EVENT OF A

GREASE FIRE, OBSERVE THE

FOLLOWING:

1. SMOTHER FLAMES with a close-

fitting lid, cookie sheet, or metal

tray, then turn off the burner. BE

CAREFUL TO PREVENT BURNS.

If the flames do not go out

immediately, EVACUATE AND

CALL THE FIRE DEPARTMENT.

2. NEVER PICK UP A FLAMING PAN

– You may be burned.

3. DO NOT USE WATER, including

wet dishcloths or towels – a

violent steam explosion will result.

4. Use an extinguisher ONLY if:

– You know you have a Class ABC

extinguisher, and you already

know how to operate it.

– The fire is small and contained

in the area where it started.

– The fire department is being

called.

– You can fight the fire with your

back to an exit.

Whenever possible, do not operate the

ventilation system during a cooktop fire.

However, do not reach through fire to turn

it off.

Cooking Safety

9 WARNING

Use this appliance only for its

intended use as described in this

manual. NEVER use this appliance

as a space heater to heat or warm

the room. Doing so may result in

overheating the appliance. Never use

the appliance for storage.

When using the timer, always supervise

the cooktop and do not allow anything to

boil over or burn. Boilovers can cause

smoke and some foods and oils may

catch fire if left on high temperature

settings.

9 WARNING

If the frying sensor is not working

properly, overheating may result

causing smoke and damage to the

pan.

WHEN COOKING WITH THE

FRYING SENSOR OBSERVE THE

FOLLOWING:

▯ Use a system pan only

▯ Always put the pan in the center of

the heating element

▯ Do not place a lid on the pan

▯ Never leave frying fat unattended

Never use the appliance if liquids or

foods have spilled around the control

panel. Always turn off the cooktop and

dry the control panel.

7

9 IMPORTANT SAFETY INSTRUCTIONS

READ AND SAVE THESE INSTRUCTIONS

Injury and damage to the appliance may

occur if control elements are not used

properly.

If the cooktop turns off automatically and

can no longer be operated, it may turn

itself on unintentionally at a later point.

Switch off the circuit breaker in the fuse

box. Contact Customer Support for

service.

Burn Prevention

DO NOT TOUCH SURFACE UNITS OR

AREAS NEAR UNITS - Surface units may

be hot even though they are dark in color.

Areas near surface units may become hot

enough to cause burns. During and after

use, do not touch, or let clothing,

potholders, or other flammable materials

contact surface units or areas near units

until they have had sufficient time to cool.

Among these areas are the cooktop and

areas facing the cooktop.

Do not heat or warm unopened food

containers. Build-up of pressure may

cause the container to burst and cause

injury.

Always use dry potholders. Moist or damp

potholders on hot surfaces may result in

burns from steam. Do not let potholder

touch hot heating elements. Do not use a

towel or other bulky cloth.

Always turn hood ON when cooking at

high heat or when flambeing food (i.e.

Crêpes Suzette, Cherries Jubilee,

Peppercorn Beef Flambe).

Use high heat settings on the cooktop

only when necessary. To avoid bubbling

and splattering, heat oil slowly on no

more than a low-medium setting. Hot oil is

capable of causing extreme burns and

injury.

Never move a pan of hot oil, especially a

deep fat fryer. Wait until it is cool.

Secure all loose garments, etc. before

beginning. Tie long hair so that it does

not hang loose, and do not wear loose

fitting clothing or hanging garments, such

as ties, scarves, jewelry, or dangling

sleeves.

9 WARNING

Risk of burns!

Metallic objects become hot very

quickly on the cooktop. Never set

down metallic objects, such as

knives, forks, spoons and lids on the

cooktop.

9 WARNING

Risk of burns!

The pan detection shut off feature

may not turn off the cooking zone

due to spilled food or objects placed

on the cooktop.

If the display does not work when a

cooking area is heating up, disconnect

the circuit breaker or fuse in the electrical

panel. Contact an authorized servicer.

9 IMPORTANT SAFETY INSTRUCTIONS

READ AND SAVE THESE INSTRUCTIONS

8

Child Safety

When children become old enough to use

the appliance, it is the responsibility of

the parents or legal guardians to ensure

that they are instructed in safe practices

by qualified persons.

Do not allow anyone to climb, stand, lean,

sit, or hang on any part of an appliance,

especially a door, warming drawer, or

storage drawer. This can damage the

appliance, and the unit may tip over,

potentially causing severe injury.

Do not allow children to use this

appliance unless closely supervised by

an adult. Children and pets should not be

left alone or unattended in the area where

the appliance is in use. They should never

be allowed to play in its vicinity, whether

or not the appliance is in use.

9 CAUTION

Items of interest to children should

not be stored in an appliance, in

cabinets above an appliance or on

the backsplash. Children climbing

on an appliance to reach items could

be seriously injured.

Cleaning Safety

Do not clean the appliance while it is still

hot. Some cleaners produce noxious

fumes when applied to a hot surface. Wet

clothes and sponges can cause burns

from steam.

Do not use steam cleaners to clean the

appliance.

Cookware Safety

Hold the handle of the pan when stirring

or turning food. This helps prevent spills

and movement of the pan.

Use Proper Pan Size.

The use of undersized cookware will

expose a portion of the heating element

or burner to direct contact and may result

in ignition of clothing. Select cookware

having flat bottoms large enough to cover

the surface heating unit. This appliance is

equipped with one or more surface units

of different size. Proper relationship of

cookware to heating element or burner

will also improve efficiency.

Cookware not approved for use with

ceramic cooktops may break with sudden

temperature changes. Use only pans that

are appropriate for ceramic induction

cooktops.

Always position handles of utensils

inward so they do not extend over

adjacent work areas, burners, or the edge

of the cooktop. This reduces the risk of

fires, spills and burns.

9 WARNING

RISK of injury!

When cooking with a double-boiler

the cooktop and cooking vessel may

crack due to overheating. The

cooking vessel in the double-boiler

must not come in direct contact with

the bottom of the pot filled with

water. Use only heat-resistant

cookware.

9

9 IMPORTANT SAFETY INSTRUCTIONS

READ AND SAVE THESE INSTRUCTIONS

9 WARNING

Danger of injury!

Cookware may jump upward due to

fluid trapped between the cookware

bottom and cooking zone. Always

keep cooking zone and cookware

bottom dry.

Proper Installation and Maintenance

Have the installer show you the location

of the circuit breaker or fuse. Mark it for

easy reference.

This appliance must be properly installed

and grounded by a qualified technician.

Connect only to properly grounded outlet.

Refer to Installation Instructions for

details.

This appliance is intended for use up to a

maximum height of 13,100 feet

(4,000 meters) above sea level.

This appliance is intended for normal

family household use only. It is not

approved for outdoor use. See the

Statement of Limited Product Warranty. If

you have any questions, contact the

manufacturer.

Do not store or use corrosive chemicals,

vapors, flammables or nonfood products

on or near this appliance. It is specifically

designed for use when heating or

cooking food. The use of corrosive

chemicals in heating or cleaning will

damage the appliance and could result in

injury.

Do not operate this appliance if it is not

working properly, or if it has been

damaged. Contact an authorized servicer.

Do not cook on a broken cooktop.

Cleaning solutions and spillovers may

create a risk of electric shock.

Do not repair or replace any part of the

appliance unless specifically

recommended in this manual. Refer all

servicing to a factory authorized service

center.

To avoid electrical shock hazard, before

servicing the appliance, switch power off

at the service panel and lock the panel to

prevent the power from being switched

on accidentally.

9 IMPORTANT SAFETY INSTRUCTIONS

READ AND SAVE THESE INSTRUCTIONS

10

Electromagnetic interference

9 WARNING

This induction cooktop generates

and uses ISM frequency energy that

heats cookware by using an

electromagnetic field. It has been

tested and complies with Part 18 of

the FCC Rules for ISM equipment.

This induction cooktop meets the

FCC requirements to minimize

interference with other devices in

residential installation. Induction

cooktops may cause interference

with television or radio reception. If

interference occurs, the user should

try to correct the interference by:

▯ Relocating the receiving antenna

of the radio or television.

▯ Increasing the distance between

the cooktop and the receiver.

▯ Connecting the receiver into an

outlet different than the cooktop.

It is the user’s responsibility to correct

any interference.

9 CAUTION

Persons with a pacemaker or similar

medical device should exercise

caution when standing near an

induction cooktop while it is in use.

Consult your doctor or the

manufacturer of the pacemaker or

similar medical device for additional

information about its effects with

electromagnetic fields from an

induction cooktop.

Cooling fan

The cooktop is equipped with a cooling

fan on its underside. Should the cooktop

lie above a drawer, there must be no

objects or paper in it. They may be

sucked in and compromise the cooling of

the appliance or damage the fan.

There must be a minimum distance of ¾"

(20mm) between the content of the

drawer and the fan input.

State of California Proposition 65

Warnings:

9 WARNING

This product can expose you to

chemicals including vinyl chloride,

which is known to the State of

California to cause cancer and birth

defects or other reproductive harm.

For more information go to

www.P65Warnings.ca.gov.

11

en-us

Causes of damage

NOTICE

▯ Rough pot and pan bases scratch the cooktop.

▯ Never leave cookware cooking empty. This can cause

damage.

▯ Do not place hot pots or pans on the control panel,

the displays or the cooktop surround. This can cause

damage.

▯ Damage can occur if hard or pointed objects fall on

the cooktop.

▯ Aluminum foil and plastic containers can melt and

stick on hot burners. The use of oven protective foil on

the cooktop is not recommended.

Overview

You will find the most frequently caused damage in the

following table.

Damage Cause Remedy

Stains Boiled over food. Remove boiled over food immediately with a glass scraper.

Unsuitable cleaning agent. Only use cleaning agents that are suitable for this type of

cooktop.

Scratches Salt, sugar and sand. Do not use the cooktop as a work surface or storage

space.

Cookware with rough bases scratch the

cooktop.

Check the cookware.

Discoloration Unsuitable cleaning agent. Only use cleaning agents that are suitable for this type of

cooktop.

Pan abrasion. Lift pots and pans when moving them.

Blisters Sugar, food with a high sugar content. Remove boiled over food immediately with a glass scraper.

12

en-us

Protecting the environment

Energy-saving advice

▯ Place a fitting lid on cookware. Cooking with an

uncovered pan will result in a considerable increase in

energy use. Use a glass lid to provide visibility and

avoid having to lift the lid.

▯ Use cookware equipped with a solid, flat bottom.

Curved pan bases increase energy consumption.

▯ The diameter of the pan base must match the size of

the element. Note: The manufacturer normally

indicates the pan's upper diameter. This is normally

greater than the diameter of the pan's base.

▯ Choose cookware of a size suited to the amount of

food you are going to cook. A large pan that is only

half full will use a lot of energy.

▯ Use a small amount of water when cooking. This saves

energy, and vegetables retain a larger percentage of

their vitamins and minerals.

▯ Select the lowest power level to maintain cooking. If

the power level is too high, energy is wasted.

Cooking with Induction

Advantages of induction cooking

Induction cooking is very different from traditional

cooking methods, as heat builds up directly in the item of

cookware. This offers numerous advantages:

▯ Saves time when boiling and frying.

▯ Saves energy.

▯ Easier to care for and clean. Spilled food does not

burn on as quickly.

▯ Heat control and safety – the cooktop increases or

decreases the heat supply as soon as the user

changes the setting. The induction element stops the

heat supply as soon as the cookware is removed from

the element, without having to switch it off first.

Cookware

Only use ferromagnetic cookware for induction cooking,

such as:

▯ Cookware made from enameled steel

▯ Cookware made from cast iron

▯ Special induction-compatible cookware made from

stainless steel.

To check whether your cookware is suitable for induction

cooking, refer to the section on ~ "Suitability test of

cookware".

To achieve a good cooking result, the ferromagnetic area

on the base of the pan should match the size of the

element. If a element does not detect an item of

cookware, try placing it on another element with a smaller

diameter.

If the only element being used is the flexible cooking

zone, larger cookware that is particularly suited to this

zone can be used. You can read more information on the

positioning of the cookware here

FP

FP

FP



éLQ



éLQ



LQ

13

en-us

Some induction cookware does not have a fully

ferromagnetic base:

▯ If the base of the cookware is only partially

ferromagnetic, only the area that is ferromagnetic will

heat up. This may mean that heat will not be

distributed evenly. The non-ferromagnetic area may

not heat up to a sufficient temperature for cooking.

▯ The ferromagnetic area will also be reduced if the

material of which the base of the cookware is made

contains aluminum, for example. This may mean that

the cookware will not become sufficiently hot or even

that it will not be detected.

Unsuitable cookware

Do not ever use adapter plates for induction or cookware

made of:

▯ Traditional stainless steel

▯ Glass

▯ Clay

▯ Copper

▯ Aluminum

Properties of the base of the cookware

The material(s) of which the base of the cookware is

made can affect the cooking result. Using pots and pans

made from materials that distribute heat evenly through

them, such as stainless-steel pans with a three-layer

base, saves time and energy.

Use cookware with a flat base; if the base of the

cookware is uneven, this may impair the heat supply.

No pan or improper size

If no pan is placed on the selected element, or if it is

made of unsuitable material or is not the correct size, the

power level displayed on the element indicator will flash.

Place a suitable pan on the element to stop the flashing.

If you take longer than 90 seconds to place a suitable

pan on the element, it will automatically turn off.

Empty pans or pans with a thin base

Do not heat up empty pans, or use pans with a thin base.

The cooktop is equipped with an internal safety system.

However, an empty pan may heat up so quickly that the

"automatic switch off" function may not have time to react

and the pan may reach very high temperatures. The pan

base could melt and damage the cooktop glass. In this

case, do not touch the pan and switch the cooktop off. If

the cooktop fails to work after it has cooled down, please

contact Customer Support.

Pan detection

Each element has a lower limit for pan detection. This

depends on the diameter of the ferromagnetic area of the

cookware and the material of which its base is made. For

this reason, you should always use the element that best

matches the diameter of the base of the pan.

Automatic detection in double and triple cooking zones

These cooking zones can detect cookware of different

sizes. Depending on the material and the properties of

the cookware, the cooking zone automatically activates

the singe, double or triple cooking zone, supplying the

proper power to obtain good cooking results.

14

en-us

Getting to know your appliance

You can find information on the dimensions and power of

the burners in~ Page 2

Control panel

Controls

When the cooktop heats up, the symbols for the controls

available at this time light up.

Touch a symbol to activate the function it represents. A

confirmation signal sounds.

Notes

▯ The corresponding symbols for the controls will light

up, depending on whether they are available.

The controls that are available will be lit white. When a

function is selected, they turn orange.

▯ Always keep the control panel clean and dry. Moisture

reduces their effectiveness.

▯ Do not place hot cookware anywhere other than the

front burner, and never on the control panel. There is a

risk that the control panel's electronics will overheat.

Controls

− Locking the Control Panel for Cleaning

Ú Frying Sensor

t Basic settings

A / @ Select settings

® Stop watch

Š Timer

Indicators

‹‹ Operating status

‚-‚ƒ Heat settings

•/œ Residual heat

‹‹ Timer

‹‹.‹‹ Stop watch

Ù Burner

Ž / ˜ PowerBoost Feature

ª Flex zone activated

« Flex zone deactivated

¹ Wok function

‘ Frying sensor

¬/«/ª Frying sensor temperature display

15

en-us

Control Knob

You can use the control knobs to select the heat setting,

the PowerBoost function, the flex zone, and the wok

function.

The control knobs have an illuminated ring with an

illuminated symbol for each function. The illuminated ring

changes color when particular functions or processes

are activated.

Elements

Residual Heat Indicator

The cook-top has a residual heat indicator for each

burner. This indicates that a burner is still hot. Do not

touch a burner while the residual heat indicator is lit up

or immediately after it goes out.

The following are shown depending on the amount of

residual heat:

▯ Display •: High temperature

▯ Display œ: Low temperature

and the illuminated ring around the control knob will

flash.

If the cookware is removed from the burner while cooking

is in progress, the heat setting indicator will flash, and

the control knob will be lit orange.

Turn the control knob to the 0 position.

If the burner is switched off, the residual heat indicator

will be lit, and the illuminated ring around the control

knob will flash. Even after the cooktop has been switched

off, the residual heat indicator will remain lit for as long

as the burner is still warm.

1 Lowest heat setting

12 Highest heat setting

Ž PowerBoost Feature

ª Flex zone activated

¹ Wok Function

Cooktops

Û / $ Single-

circuit

burner

Use cookware that is a suitable

size.

ò Tri-circuit

burner

The burner switches on automati-

cally when you use cookware with a

base that covers the outer edge of

the zone (ð or ò).

á Flex zone See section ~ "Flexible Cook-

ing Zone" à la page 20

Only use cookware that is suitable for use with induction

cooktops – see section

~ "Cooking with Induction" on page 12

16

en-us

Special Accessories

You can purchase the following accessories from your

specialist retailer:

Use the accessories only as indicated. The manufacturer

assumes no liability for incorrect usage of the

accessories.

Operating the appliance

This chapter explains how to set a element. The table

shows heat settings and cooking times for various meals.

Setting a Burner

Use the control knob to select the heat setting you

require.

Selecting a Heat Setting

Push in the control knob and turn it to the heat setting

you require.

The selected heat setting will be lit on the burner display.

The illuminated ring around the control knob will be lit.

Switching Off the Burner

Turn the control knob to the 0 position.

The residual heat indicator will be lit, and the illuminated

ring around the control knob will flash until the burner

has cooled down.

Note: If there is no cookware on the burner or if the

cookware is not detected, the selected heat setting will

flash and the illuminated ring around the control knob will

be lit orange. After approx. 9 minutes, the burner will

switch off.

In this case, the illuminated ring around the control knob

will flash. Turn the control knob back to position 0; the

illuminated ring will stop flashing.

WP 400 001 Wok pan

WZ 400 001 Wok ring

VA 420 000 Connection strip for combination with

other Vario appliances in the 400 series

for flush installation

VA 420 001 Connection strip for combination with

other Vario appliances in the 400 series

for flush installation with appliance

cover/compensation strip

VA 420 010 Connection strip for combination with

other Vario appliances in the 400 series

for surface-mounted installation

VA 420 011 Connection strip for combination with

other Vario appliances in the 400 series

for surface-mounted installation with

appliance cover/compensation strip

VA 440 010 Stainless steel appliance cover

0 Burner off.

Heat setting 1 Lowest setting

Heat setting 12 Highest setting

17

en-us

Chef's recommendations

Recommendations

▯ When heating up puree, cream soups, and thick

sauces, stir occasionally.

▯ Set heat setting 10 to 12 for preheating.

▯ When cooking with the lid on, reduce the heat as soon

as you see steam escaping. The cooking result is not

affected by the steam escaping.

▯ After cooking, keep the lid on the cookware until you

serve the food.

▯ To cook with the pressure cooker, observe the

manufacturer's instructions.

▯ Do not cook food for too long, otherwise the nutrients

will be lost. The short-term timer can be used to set

the optimum cooking time.

▯ For a healthier result, ensure that the oil does not

smoke.

▯ To brown food, fry it in small batches.

▯ Cookware may reach high temperatures while the food

is cooking. Use oven mitts.

▯ You can find recommendations for energy-efficient

cooking in section ~ "Protecting the

environment"

Cooking table

The table shows which heat setting is suitable for each

type of food. The cooking time may vary depending on the

type, weight, thickness and quality of the food.

Heat setting Cooking methods Examples

11 - 12 Boiling Water

Searing Meat

Heating Fat/oil, liquids

Bringing to a boil Soups, sauces

Blanching Vegetables

7 - 10 Frying Meat, potatoes

6 - 8 Frying Fish

8 - 9 Baking Flour-based and/or egg-based dishes, e.g., pan-

cakes

Simmering in an uncovered dish Dough-based foods, liquids

7 - 8 Browning Flour, onions

Roasting Almonds, breadcrumbs

Rendering Bacon

Reducing Stocks, sauces

6 - 7 Poaching in an uncovered dish Dumplings, soup pasta, soup vegetables, soup

meat, poached eggs

5 - 6 Poaching in an uncovered dish Boiled sausages

6 - 7 Steaming Vegetables, potatoes, fish

Steaming Vegetables, fruit, fish

Braising Roulade, roasts, vegetables

3 - 4 Braising Goulash

4 - 5 Cooking with the lid on Soups, sauces

3 - 4 Defrosting Frozen foods

Soaking Rice, legumes, vegetables

Thickening Egg-based dishes, e.g., omelette

1 - 2 Heating/keeping warm Soup, vegetables in sauce

1 Heating/keeping warm Stew

Melting Butter, chocolate

18

en-us

Wok Function

The wok feature is only to be used with the wok pan and

wok accessories; it is not suitable for other types of

cookware.

Wok and Wok Accessories

(Not included with the appliance)

Wok pans and wok pan supports can be purchased from

our sales partner Gaggenau.

Since the base of the wok pan is round, it can only be

used with a wok pan support.

Ensure that the wok is properly positioned on the wok

pan support when using it for cooking. Always position

the wok pan support in the center of the burner.

Do not heat the wok up when it is empty.

Use a special curved turner (chan) or a long-handled

wooden turner.

Use a ladle to spoon the food out of the pan. The easiest

way to spoon out food cooked in hot fat or large

quantities of sauce is with a skimming ladle.

Use a bamboo steamer for steaming.

Notes

▯ Use the wok and wok pan support in conjunction with

the wok function only.

▯ Do not clean the wok pan support in the dishwasher.

Cooking with the Wok

Sautéing is one of the most popular cooking methods to

use with a wok. The ingredients are cut small and cooked

very quickly at a high temperature, with constant stirring.

The large, round-bottomed pan allows you to stir all the

ingredients easily and quickly and turn them as you would

in a normal frying pan. Stirring prevents the ingredients

from sticking to the pan. Any excess fat collects in the

center of the pan. The meat pores will close and the meat

will remain succulent. Vegetables will remain crunchy.

The flavor and vitamins will be retained.

Note: The wok allows you to cook more quickly than with

a conventional frying pan. For this reason, all the

ingredients should be prepared before you start cooking.

The order in which the ingredients are added is equally

important: Ingredients that take longer to cook (high-fiber

vegetables such as carrots) should be added first, and

ingredients with a shorter cooking time (e.g., mushrooms,

bean sprouts) should not be added until the end.

Proceed as follows here:

▯ Pour oil into the wok. Peanut oil and soybean oil work

well in woks.

▯ Cut the food into small pieces, but not so small that

they burn easily.

▯ Heat the oil to just below its smoke point; you can now

start sautéing the food.

▯ If you wish to sauté large quantities of food, we

recommend that you do this in batches, otherwise not

all the ingredients will be in contact with the base of

the wok at the same time.

9 CAUTION

The wok and wok accessories become very hot

during cooking. Keep out of reach of children. Do

not remove the wok accessories until the residual

heat indicator has gone out.

19

en-us

Activate

Push in the control knob and turn it to position ¹. After

a few seconds, an audible signal will sound and ¹ will

be lit.

The function has now been activated.

Use the control knob to select the heat setting you

require.

Deactivate

Turn the control knob to the 0 position. The ¹ display

will go out, the residual heat indicator will appear, and

the illuminated ring around the control knob will flash.

This function has now been deactivated.

Table

Preheating setting Heat setting

Heating large volumes of water PowerBoost

Sautéing

Fresh produce, e.g., vegetables - 10 - 11

Frozen products, e.g., sautéed vegetables and chicken - 11 - 12

Deep-frying (100-200 g per batch in 1 l oil, deep-fry in batches)

Fresh products, e.g., spring rolls 12 8 - 9

Frozen products, e.g., spring rolls 12 8 - 9

Frozen vegetables in tempura batter 12 10 - 11

Vegetables in tempura batter 12 9 - 10

Cooking with the lid off

Soup 12 6 - 7

Fondue

Cheese fondue 6 3 - 4

Chocolate fondue 8 3 - 4

Making sauces

e.g., teriyaki sauce - 2 - 3

Keeping food Warm - 1 - 2

20

en-us

Flexible Cooking Zone

You can use the flexible cooking zone as a single burner

or as two independent burners, as required.

It consists of four inductors that work independently of

each other. If the flexible cooking zone is in use, only the

area that is covered by cookware is activated.

Cookware use recommendations

Place the cookware in the middle. This assures optimal

pot detection and heat distribution.

As two independent elements

The flexible cooking zone is used like two independent

elements.

Activate

See section ~ "Operating the appliance"

As a single element

Using the entire cooking zone by connecting both

elements.

Linking the Two Burners

1. Position the cookware. Turn one of the control knobs

to the ª position.

2. Use the other control knob to select the heat setting.

The ª display lights up. The heat setting lights up on

the displays for the two burners.

The flex cooking zone has now been activated.

Changing the Heat Setting

To alter the heat setting, use the same control knob you

used to select the original heat setting.

Adding New Cookware

Position the new cookware. Turn the control knob that

was used to select the flex cooking zone to position 0

and then back to the ª position.

The cookware will be detected, and the heat setting that

was previously selected will be retained.

Note: If the cookware is moved from the element being

used or lifted up, the element begins an automatic search

and the heat setting selected previously is retained.

Unlinking the Two Burners

Turn the control knob that was used to select the flex

cooking zone to the 0 position. The « display lights up.

The flex cooking zone has now been deactivated. The two

burners will now function independently.

Note: If you switch the burner off, and then switch it back

on again later, the flexible cooking zone is reset to

function as two independent burners.

As a single element

Diameter smaller than or equal to

5 X" (13 cm)

Place the cookware on one of the

four positions that can be seen in

the illustration.

Diameter greater than 5 X" (13 cm)

Place the cookware on one of the

three positions that can be seen in

the illustration.

If the cookware takes up more than

one element, place it starting on

the upper or lower edge of the flex-

ible cooking zone.

As two independent elements

The front and rear elements each have

two inductors and can be used inde-

pendently of each other. Select the

required heat setting for each of the ele-

ments. Use only one item of cookware

on each element.

La page est en cours de chargement...

Gaggenau VI 492 611 Use & Care

Gaggenau VI 492 611 Use & Care

dans d''autres langues

Documents connexes

Autres documents