Gaggenau VL 414 712 ***Available Q2 2021*** Manuel utilisateur

*DJJHQDX

Use and care manual 2

Notice d’utilisation 29

Manual de instrucciones 58

VL 414 712

Downdraft ventilation

Aérateur de plan de cuisson

Extractor de superficie

2

en-us

Table of Contents

Use and care manual

9 Safety Definitions 3

IMPORTANT SAFETY INSTRUCTIONS 4

General notes 4

Fire Safety 4

Burn Prevention 6

Child Safety 6

Cleaning Safety 7

Safe use 7

Proper Installation and Maintenance 8

Proposition 65 Warning 10

Causes of damage 11

Protecting the environment 11

Operating modes 11

Air extraction 11

Recirculation 11

Getting to know your appliance 12

Downdraft ventilation 12

Control knob 12

Display on the illuminated ring 12

Special accessories 12

Before using the appliance for the first time 12

Operating the appliance 13

Turning on 13

Turning off 13

Using Home Connect to set the appliance 13

Automatic mode with sensor control 13

Sensor sensitivity 13

Intensive mode 13

Run-on function 14

Intermittent ventilation 14

Saturation notification 14

Ventilation molding 14

Q

Basic Settings 15

Exiting the basic settings menu and saving

the settings 15

o

Home Connect 16

Setting Up 16

Open or close the Home Connect settings menu 16

Overview of the Home Connect settings menu 17

Connecting the appliance to your home network

(Wi-Fi) 17

Manual Registration in the Home Network 18

Logging in to your home network automatically (WPS) 18

Exiting the Home Connect settings menu 19

Connecting the appliance to your home network

(LAN) 19

Switch the wireless network connection

(LAN or WLAN) on or off 20

Changing from Wi-Fi connection to LAN connection 20

Changing from LAN connection to Wi-Fi connection 20

Resetting the Home Connect connections 20

Software Update 21

Remote Diagnostics 21

Information on Data Protection 21

Declaration of Conformity 21

Wi-Fi

®

Module 21

e

Connecting the cooktop extractor system to the

cooktop 22

Connecting appliances via the home network 23

Connecting appliances directly 23

Cleaning and maintenance 24

Cleaning the appliance 25

Removing and installing the metal grease filter 25

Cleaning the metal grease filter 25

Changing the activated charcoal filter

(only in circulating-air mode) 26

Resetting the saturation indicator 26

Faults – What to Do? 27

Customer service 28

Additional information on products, accessories,

replacement parts and services, as well as the Use and

care manual and the Installation instructions can be

found at www.gaggenau.com and in the online shop

www.gaggenau.com/zz/store

3

Safety Definitions en-us

9 Safety Definitions

Safety Definitions

9 WARNING

This indicates that death or serious injuries may

occur as a result of non-observance of this

warning.

9 CAUTION

This indicates that minor or moderate injuries may

occur as a result of non-observance of this

warning.

NOTICE

This indicates that damage to the appliance or property

may occur as a result of non-compliance with this

advisory.

Note: This alerts you to important information and/or

tips.

9 IMPORTANT SAFETY INSTRUCTIONS

READ AND SAVE THESE INSTRUCTIONS

4

IMPORTANT SAFETY INSTRUCTIONS

READ AND SAVE THESE INSTRUCTIONS

9 WARNING

When properly cared for, your new

appliance has been designed to be

safe and reliable. Read all

instructions carefully before use.

These precautions will reduce the

risk of burns, electric shock, fire,

and injury to persons. When using

kitchen appliances, basic safety

precautions must be followed,

including those in the following

pages.

General notes

This appliance is not intended for

operation with an external clock timer or a

remote control.

Make sure that no small parts or liquids

penetrate into the appliance.

Check device for visible damage after

unpacking it. Don't plug in device in the

event of transport damage.

Adults and children must never operate

the appliance without supervision if they

are either physically or mentally incapable

or if they lack the necessary knowledge

and experience to operate the appliance

correctly and safely. Don't let children

play with the appliance or packaging

material.

Fire Safety

Always have a working smoke detector

near the kitchen.

9 WARNING

Risk of fire!

If the downdraft ventilator is installed

next to a gas appliance, an air baffle

must be used (available as

accessory). This prevents the flame

from being drawn into the fan. Thus,

a filter soaked in grease cannot be

ignited by the gas flame.

9 WARNING

TO REDUCE THE RISK OF A

RANGE TOP GREASE FIRE:

1. Never leave surface units

unattended at high settings.

Boilovers cause smoking and

greasy spillovers that may ignite.

Heat oils slowly on low or medium

settings.

2. Always turn hood ON when

cooking at high heat.

3. Clean ventilating fans frequently.

Grease should not be allowed to

accumulate on fan or filter.

4. Use proper pan size. Always use

cookware appropriate for the size

of the surface element.

Do not flambé under the extractor

hood or work with a naked flame.

When switched on, the extractor

hood draws flames into the filter.

There is a risk of fire due to deposits

on the grease filter!

5

9 IMPORTANT SAFETY INSTRUCTIONS

READ AND SAVE THESE INSTRUCTIONS

9 CAUTION

For general ventilating use only. Do

not use to exhaust hazardous or

explosive materials and vapors.

Do not operate any fan with a damaged

cord or plug. Discard fan or contact an

authorized service facility for examination

and/or repair.

Do not run cord under carpeting. Do not

cover cord with throw rugs, runners, or

similar coverings. Do not route cord

under furniture or appliances. Arrange

cord away from traffic area and where it

will not be tripped over.

In the event that personal clothing or hair

catches fire, drop and roll immediately to

extinguish flames.

Smother flames from food fires other than

grease fires with baking soda. Never use

water on cooking fires.

9 WARNING

TO REDUCE THE RISK OF INJURY

TO PERSONS IN THE EVENT OF A

RANGE TOP GREASE FIRE,

OBSERVE THE FOLLOWING:

▯ SMOTHER FLAMES with a close-

fitting lid, cookie sheet, or metal

tray, then turn off the burner. BE

CAREFUL TO PREVENT BURNS.

If the flames do not go out

immediately, EVACUATE AND

CALL THE FIRE DEPARTMENT.

▯ NEVER PICK UP A FLAMING PAN

– You may be burned.

▯ DO NOT USE WATER, including

wet dishcloths or towels – a

violent steam explosion will result.

▯ Use an extinguisher ONLY if:

– You know you have a Class ABC

extinguisher, and you already know

how to operate it.

– The fire is small and contained in

the area where it started.

– The fire department is being called.

– You can fight the fire with your back

to an exit.

Have an appropriate fire extinguisher

available, nearby, highly visible and easily

accessible near the appliance.

Whenever possible, do not operate the

ventilation system during a cooktop fire.

However, do not reach through fire to turn

it off.

9 WARNING

Risk of fire!

Grease deposits in the grease filter

can ignite.

Clean the grease filter at least every

two months or as often as necessary.

Never operate the appliance without

the grease filter.

9 IMPORTANT SAFETY INSTRUCTIONS

READ AND SAVE THESE INSTRUCTIONS

6

9 WARNING

Risk of fire!

Grease deposits in the grease filter

can catch fire. Never work with a

naked flame near the appliance (e.g.

flambéing). Install the unit near a

heat-producing appliance for solid

fuels (e.g. wood or coal) only if there

is a closed, non-detachable cover.

There must be no flying sparks.

9 WARNING

Risk of fire!

When gas burners are in operation

without any cookware placed on

them, they can build up a lot of heat.

A ventilation appliance installed

above the cooker may become

damaged or catch fire. Only operate

the gas burners with cookware on

them.

9 WARNING

Risk of fire!

Hot oil and fat catch fire fast. Never

leave hot oil and fat unsupervised.

Never extinguish a fire with water.

Switch off the cooking position.

Suffocate flames carefully with a lid,

a fire blanket or similar.

Burn Prevention

9 WARNING

Risk of burns!

The accessible parts get hot during

operation. Never touch hot parts.

Keep children away.

Child Safety

When children become old enough to use

the appliance, it is the responsibility of

the parents or legal guardians to ensure

that they are instructed in safe practices

by qualified persons.

Remove all tape and packaging before

using the appliance. Destroy the

packaging after unpacking the appliance.

Never allow children to play with

packaging material.

Do not allow anyone to climb, stand, lean,

sit, or hang on any part of an appliance,

especially a door, warming drawer, or

storage drawer. This can damage the

appliance, and the unit may tip over,

potentially causing severe injury.

Do not allow children to use this

appliance unless closely supervised by

an adult. Children and pets should not be

left alone or unattended in the area where

the appliance is in use. They should never

be allowed to play in its vicinity, whether

or not the appliance is in use.

7

9 IMPORTANT SAFETY INSTRUCTIONS

READ AND SAVE THESE INSTRUCTIONS

9 CAUTION

Items of interest to children should

not be stored in an appliance, in

cabinets above an appliance or on

the backsplash. Children climbing

on an appliance to reach items could

be seriously injured.

Cleaning Safety

9 WARNING

Be sure the entire appliance

(including the grease filters and light

bulbs, if applicable) has cooled and

grease has solidified before

attempting to clean any part of the

appliance.

9 WARNING

Risk of burns, electrical shock!

by appliance. Always let appliance

cool down prior to cleaning or

maintenance. Turn off fuse or unplug

power plug.

Do not use steam cleaners to clean the

appliance.

9 CAUTION

Damage to appliance

Do not remove control knobs for

cleaning.

Safe use

9 WARNING

Do not repair, replace or remove any

part of the appliance unless

specifically recommended in the

manuals. Improper installation,

service or maintenance can cause

injury or property damage. Refer to

this manual for guidance. All other

servicing should be done by an

authorized service provider.

9 WARNING

Risk of burns!

by hot appliance when used with

cooking appliances. Keep children

away and ensure proper use.

9 WARNING

Risk of injury, damage!

through objects set down on the

appliance. Never place objects on

the appliance.

9 WARNING

Risk of short circuit!

The cable insulation of electrical

appliances can melt. Never place

connection cable on the hot cooking

zones.

9 IMPORTANT SAFETY INSTRUCTIONS

READ AND SAVE THESE INSTRUCTIONS

8

9 WARNING

Risk of fire!

Overly greasy filters pose a risk of

catching fire! Never deep-fry or grill

next to the appliance without paying

careful attention. Clean grease

filters regularly.

Proper Installation and Maintenance

Have the installer show you the location

of the circuit breaker or fuse. Mark it for

easy reference.

This appliance must be properly installed

and grounded by a qualified technician.

Connect only to properly grounded outlet.

Refer to Installation Instructions for

details.

This appliance is intended for normal

family household use only. It is not

approved for outdoor use. See the

Statement of Limited Product Warranty. If

you have any questions, contact the

manufacturer.

Do not store or use corrosive chemicals,

vapors, flammables or nonfood products

in or near this appliance. It is specifically

designed for use when heating or

cooking food. The use of corrosive

chemicals in heating or cleaning will

damage the appliance and could result in

injury.

Do not operate this appliance if it is not

working properly, or if it has been

damaged. Contact an authorized service

provider.

Do not repair or replace any part of the

appliance unless specifically

recommended in this manual. Refer all

servicing to an authorized service

provider.

9 CAUTION

Grease left on filters can remelt and

move into the vent.

9 WARNING

When the hood is operated in

exhaust-air mode simultaneously with

a different burner which also makes

use of the same chimney (such as

gas, oil or coal-fired heaters,

continuous-flow heaters, hot-water

boilers) care must be taken to

ensure that there is an adequate

supply of fresh air which will be

needed by the burner for

combustion.

Safe operation is possible provided

that the under pressure in the room

where the burner is installed does

not exceed 4 Pa (0.04 mbar).

This can be achieved if combustion

air can flow through non-lockable

openings, e.g. in doors, windows

and via the air-intake/exhaust-air wall

box or by other technical measures,

such as reciprocal interlocking, etc.

Hidden surfaces may have sharp

edges. Use caution when

reaching behind or under

appliance.

9

9 IMPORTANT SAFETY INSTRUCTIONS

READ AND SAVE THESE INSTRUCTIONS

9 WARNING

Avoid carbon monoxide poisoning –

Provide adequate air intake so

combustion gases are not drawn

back into the room.

An air-intake/exhaust-air wall box by

itself is no guarantee that the limiting

value will not be exceeded.

Note: When assessing the overall

requirement, the combined ventilation

system for the entire household must be

taken into consideration. This rule does

not apply to the use of cooking

appliances, such as cooktops and ovens.

9 WARNING

Mortal danger, risk of poisoning!

through back-suctioned combustion

gases. Never operate appliance in

exhaust air mode simultaneously with

a fire-powered appliance that relies

on ambient air if sufficient air supply

has not been provided for.

Fire-powered appliances that rely on

ambient air (e.g. gas, oil, wood or coal-

powered heaters, flow heaters, water

heaters) draw on combustion air from the

room where they're installed and direct

the exhaust fumes through an exhaust

system (e.g. chimney), out of the building.

In combination with an activated range

hood, ambient air is drawn from the

kitchen and neighboring rooms—

insufficient supply air may cause low

pressure. Poisonous gases from the

chimney or exhaust shaft may be

suctioned back into the living space.

▯ That's why sufficient supply air must

always be provided for.

▯ An air supply / exhaust wall duct alone

doesn't ensure adherence to the limit

value.

9 WARNING

Risk of electrical shock!

through damaged connection cable.

Don't bend or pinch connection

cable during installation.

9 WARNING

Risk of burns, injury!

through damaged connection cable.

Damaged connection cable must be

replaced by an licensed specialist

(electrician).

9 WARNING

Risk of injury!

From sharp edges during

installation. Always wear protective

gloves while installing the appliance.

9 IMPORTANT SAFETY INSTRUCTIONS

READ AND SAVE THESE INSTRUCTIONS

10

Proposition 65 Warning:

This product may contain a chemical

known to the State of California, which

can cause cancer or reproductive harm.

Therefore, the packaging of your product

may bear the following label as required

by California:



&DQFHUDQG5HSURGXFWLYH+DUPZZZ3:DUQLQJVFDJRY

67$7(2)&$/,)251,$352326,7,21:$51,1*

:$51,1*

11

Causes of damage en-us

Causes of damage

9 CAUTION

Risk of damage due to ingress of humidity into the

electronic circuitry. Never clean operator controls

with a wet cloth.

9 CAUTION

Surface damage due to strong or abrasive cleaning

agents. Never use strong and abrasive cleaning

agents.

Protecting the environment

Unpack the appliance and dispose of the packaging in an

environmentally friendly manner.

Operating modes

This appliance can be used in air extraction or air

recirculation mode depending on the remote fan unit

connected.

Air extraction

Note: The extracted air must neither be discharged into

an operating smoke or waste gas chimney nor into a shaft

that serves to ventilate rooms where heat-producing

appliances are installed.

▯ The local chimney sweep's consent must be obtained

if the exhaust air is to be routed to a smoke or waste

gas chimney that is not in operation.

▯ A telescopic wall duct should be used if the exhaust

air is routed through the outside wall.

Recirculation

Note: You must install an activated charcoal filter to bind

odors in the recirculation mode. Refer to the manual or

ask your specialist dealer for details of the various

options for operating the appliance in the recirculation

mode. You can obtain the necessary accessories from

specialist dealers, from our after-sales service or in the

online shop.

The air sucked in is cleaned by the

grease filters and is routed outdoors

through a pipe system.

The aspirated air is cleaned by the grease

filters and an activated charcoal filter and

is returned to the kitchen.

12

en-us Getting to know your appliance

Getting to know your appliance

Downdraft ventilation

Control knob

Display on the illuminated ring

The control knob has an illuminated ring that indicates a

number of statuses and functions.

The illuminated ring on the control knob lights up orange

during operation. You can choose between two shades. If

you have several appliances installed next to each other,

you can change the shades in the settings for the

appliances so that all of the illuminated rings light up in

the same shade.

Special accessories

You can order the following accessories from your

specialist dealer:

Use the accessories only as indicated. The manufacturer

assumes no liability for incorrect usage of the

accessories.

Before using the appliance for the first

time

Before using the appliance for the first time

Before using the appliance and accessory parts for the

first time, clean them thoroughly.

( Filter cover

0 Metal grease filter

8 Control knobs

Symbol Explanation

h Home Connect

0 Switching off the appliance

< Switching on automatic mode

1 Switches on fan level 1

2 Switches on fan level 2

3 Switches on fan level 3

Ž Switches on intensive mode

μ Switches on intermittent ventilation

œ Resets the saturation indicator







Display Meaning

Û Off Appliance OFF

Ú Lights up orange Appliance ON

ˆ Switch off appliance,

slowly flashes white

(three times)

Metal grease filter satura-

tion indicator

ˆ Switch off appliance,

rapidly flashes white

(six times)

Activated charcoal filter

saturation indicator

(in circulating-air mode

only)

ˆ Switch off appliance,

slowly flashes orange

Fan run-on active

Ú Lights up blue Home Connect

ˆ Flashes blue Home Connect

ˆ Flashes orange and

white alternately

Safety shut-off, power fail-

ure

ˆ Flashes yellow and

magenta alternately

Appliance fault

Call customer service.

Ú Lights up green for a

few seconds, then

turns yellow

Appliance is initializing,

only after initial connection

or power failure

AA 414 010 Air conduction rail for operation beside

a VG 415/425 gas appliance

13

Operating the appliance en-us

Operating the appliance

Turning on

Automatic mode, three fan settings, intensive mode Ž

and the intermittent ventilation system μ are available for

extraction.

Push in the control knob and turn it clockwise to the fan

setting you require.

The illuminated ring behind the control knob lights up.

Turning off

Turn the control knob anti-clockwise to position 0.

If the run-on function is activated, the appliance

continues to run for a short time after it is switched

off.~ "Run-on function" on page 14

Using Home Connect to set the

appliance

You can set the appliance via the Home Connect app and

via a hob using the Home Connect app, see and

~ "Connecting the cooktop extractor system to

the cooktop" on page 22.

1. Set up the Home Connect app.

2. Establish the connection to the hob.

3. Push in the control knob and turn it anti-clockwise to

the h position.

Automatic mode with sensor control

In automatic mode, a sensor in the appliance detects the

intensity of the cooking and roasting fumes. The

appliance selects the appropriate fan setting

automatically.

Switching on

Push in the control knob and turn it clockwise to the <

position.

Automatic mode is activated.

The optimum fan setting 1, 2 or 3 is set automatically

using a sensor. The illuminated ring behind the control

knob lights up orange while the ventilation system is

switched on.

If the sensor no longer detects odors, the appliance

selects the lowest fan setting. After 20 minutes (in

circulating-air mode) or six minutes (in air extraction

mode), the ventilation system is switched off. Turn the

control knob to the 0 position.

Switching off

Turn the control knob anti-clockwise to position 0.

Sensor sensitivity

In automatic mode, a sensor in the appliance detects the

intensity of the cooking and roasting fumes. Depending

on the setting of the sensor, the fan automatically

switches to another fan setting.

Default sensitivity setting: 2

Lowest sensitivity setting: 1

Highest sensitivity setting: 4

Changing the sensitivity of the sensor

If the sensor control system reacts too quickly or too

slowly, change the sensitivity setting.

You can set the sensitivity in the Home Connect app.

Intensive mode

Activate intensive mode if strong odors or large amounts

of steam are produced. In this mode, the appliance

operates at its maximum fan setting for a short time. After

approx. six minutes, the appliance automatically switches

back to fan setting 3.

14

en-us Operating the appliance

Run-on function

The run-on function leaves the ventilation system running

at a low fan setting for a few minutes after it has been

switched off. While the run-on function is switched on,

the illuminated ring for the control knob slowly flashes

orange. The appliance automatically switches off the

ventilation after 20 minutes.

The fan run-on removes any remaining kitchen fumes and

reduces the condensation in the appliance.

Notes

▯ You can activate or deactivate the run-on function in

the basic settings or in the Home Connect app.

▯ The run-on function does not start unless the

appliance has been switched on for at least two

minutes.

▯ The run-on function only starts in circulating-air mode.

Switching off the run-on function early

1. Turn the control knob to <.

2. Turn the control knob to 0.

The appliance switches off the fan run-on early.

Intermittent ventilation

With intermittent ventilation, the fan automatically

switches to fan setting 1 for six minutes every hour.

Switching on

Push in the control knob and turn it clockwise to the

μ position.

Intermittent ventilation is activated. The illuminated ring

behind the control knob lights up orange while the

ventilation system is switched on.

Switching off

Turn the control knob anti-clockwise to position 0.

Saturation notification

When the metal grease filter or the activated charcoal

filter (only in circulating-air mode) are saturated, the

illuminated ring on the control knob flashes:

▯ Metal grease filter: Three times white, slow flashing

▯ Activated charcoal filter: Six times white, rapid flashing

Do not wait any longer to clean the metal grease filters or

replace or regenerate the activated charcoal

filters.~ "Cleaning and maintenance" on page 24

Ventilation molding

If downdraft ventilation is used next to a gas appliance, a

ventilation molding AA 414 010 must be fitted on the gas

appliance during cooking. The ventilation molding

improves extraction when using gas appliances. The

ventilation molding prevents extinction of small flames

due to the draft.

15

Basic settings en-us

Q

Basic Settings

Basic settings

The appliance has various basic settings. You can adapt

these basic settings to suit your individual requirements.

To access the basic settings:

1. Carry out the following operating steps one after the

other without interruption.

2. Push in the control knob and turn it counterclockwise

to the h position. Keep the control knob pressed in.

3. Turn the control knob clockwise to position 1. Keep

the control knob pressed in.

4. Turn the control knob counterclockwise to position 0.

The illuminated ring around the control knob lights up

yellow.

5. Select the required setting using the control knob.

After approx. 5 seconds, the illuminated ring for the

control knob lights up green. Exit the basic settings to

save the setting you require.

6. To change the setting back, push in the control knob

and turn it counterclockwise to position 0, and use the

control knob to select the required setting.

The control knob lights up yellow.

Exiting the basic settings menu and

saving the settings

1. Carry out the following operating steps one after the

other without interruption.

2. Push in the control knob and turn it counterclockwise

to the h position. Keep the control knob pressed in.

3. Turn the control knob clockwise to position 1. Keep

the control knob pressed in.

4. Turn the control knob counterclockwise to position 0.

The illuminated ring around the control knob goes out.

Control

knob posi-

tion

Function Illuminat-

ed ring

color:

Green

Illuminat-

ed ring

color: Yel-

low

< Color selection for

the illuminated

ring around the

control knob

Orange* Orange

(dark)

1 Fan setting 1 for

intermittent venti-

lation

Selected* Not

selected

2 Fan setting 2 for

intermittent venti-

lation

Selected Not

selected*

3 Fan setting 3 for

intermittent venti-

lation

Selected Not

selected*

*Basic setting



Ž Run-on function Activated* Deacti-

vated

μ Noise reduction Activated Deacti-

vated*

Control

knob posi-

tion

Function Illuminat-

ed ring

color:

Green

Illuminat-

ed ring

color: Yel-

low

*Basic setting

16

en-us Home Connect

o

Home Connect

This appliance is LAN- or Wi-Fi-enabled and settings can

be sent to the appliance via a mobile device.

If the appliance is not connected to the home network, it

will function as an extractor hood with no network

connection. The appliance can always be operated via

the control knob.

The availability of the Home Connect function depends

on the availability of Home Connect services in your

country. Home Connect services are not available in

every country. You can find more information on this at

www.home-connect.com.

Notes

▯ Ensure that you follow the safety instructions in this

user manual and that these are also observed when

operating the appliance via the Home Connect app.

You must also follow the instructions in the Home

Connect app.

▯ Operation via the Home Connect app is only possible

if the control knob for the cooktop extractor system is

at the h position.

▯ Operating the appliance directly from the appliance

always takes priority. It is not possible to operate the

appliance using the Home Connect app during this

time.

Setting Up

To implement settings via Home Connect, you must have

installed and set up the Home Connect app on your

mobile device.

Note: In networked standby mode, your appliance

requires a maximum of 2 W.

Your appliance must also be connected to the home

network (router) and to the Home Connect app (on a

mobile device, e.g. a smartphone or tablet). You can

choose between the following connection types:

▯ Connection via Wi-Fi: If there is a Wi-Fi connection,

you can connect your appliance to your home network

manually or automatically. Establish the connection to

your home network and then the connection to the

Home Connect app.

▯ Connection via LAN cable: The appliance is

connected to the home network automatically

following confirmation on the appliance.

Note: The app will guide you through the entire

registration process. In case of doubt, follow the

instructions in the app.

Setting up the Home Connect app

Note: You require a mobile device with the latest version

of the relevant operating system.

1. On your mobile device, go to the App Store (Apple

devices) or to the Google Play Store (Android

devices).

2. Enter "Home Connect" in the search field.

3. Select the Home Connect app and install it on your

mobile device.

4. Start the app and create your Home Connect login

details. The app will guide you through the

registration process. Make a note of your e-mail

address and password.

Open or close the Home Connect

settings menu

To connect your appliance to Home Connect or establish

the connection to your home network, you will need to

open the Home Connect settings menu on your

appliance.

Note: It is important to carry out the following operating

steps without interruption, one after the other.

1. Push in the control knob and turn it one notch

counterclockwise to the h position. Keep the control

knob pressed in.

2. Turn the control knob two notches clockwise to the <

position. Keep the control knob pressed in.

3. Turn the control knob one notch counterclockwise to

position 0.

Note: If you select settings in the Home Connect settings

menu, you will need to exit the Home Connect menu in

the same way to save the settings.

Displays on the illuminated ring on the control knob

▯ While you are in the Home Connect menu, the

illuminated ring on the control knob lights up blue.

▯ While the appliance is establishing a connection to

the home network, the illuminated ring on the control

knob flashes blue.



17

Home Connect en-us

▯ If the appliance has established a connection to the

home network, the illuminated ring on the control

knob lights up green.

▯ If the appliance was not able to establish a connection

to the home network, the illuminated ring on the

control knob lights up red. Start the connection

process again.

Overview of the Home Connect settings

menu

▯ Manually logging in to the home network (Wi-Fi): To

log in to the home network (Wi-Fi) manually, you

require the network name (SSID) and password (key)

for your home network.~ "Manual Registration in

the Home Network" on page 18

▯ Log in to the home network (Wi-Fi) with a WPS-

enabled router.~ "Logging in to your home

network automatically (WPS)" on page 18

▯ Direct connection to a compatible cooktop.

~ "Connecting appliances directly" on page 23

▯ Switch LAN or Wi-Fi off and on, e.g. while on

holiday.~ "Switch the wireless network

connection (LAN or WLAN) on or off"

on page 20

▯ Reset the Home Connect connections, e.g. for a new

router, changing to a new Internet service

provider.~ "Resetting the Home Connect

connections" on page 20

Connecting the appliance to your home

network (Wi-Fi)

1. Carry out the following operating steps one after the

other without interruption.

2. Open the Home Connect settings menu. ~ "Open

or close the Home Connect settings menu"

on page 16

The illuminated ring around the control knob lights up

blue.

18

en-us Home Connect

Manual Registration in the Home

Network

Note: To log in to the home network (Wi-Fi) manually, 

you require the network name (SSID) and password (key)

for your home network.

1. Turn the control knob clockwise to the < position.

After around 5 seconds, the illuminated ring around

the control knob flashes blue and yellow alternately.

The appliance is now in manual mode.

2. Switch to the general settings menu of your mobile

device and call up the Wi-Fi settings.

On your mobile device, the "HomeConnect" Wi-Fi

connection is available for around 20 minutes.

3. Connect to the "HomeConnect" Wi-Fi connection

(password: "HomeConnect").

4. Launch the Home Connect app on your mobile device

and follow the instructions for network login. Enter the

password (key) of the home network. Following

successful connection to the router, the illuminated

ring around the control knob lights up green for

around 3 seconds.

5. The illuminated ring around the control knob flashes

blue and white alternately. The connection to the

mobile device is being established.

The appliance is available in the app on the mobile

device once the illuminated ring around the control

knob lights up green. If the illuminated ring around the

control knob lights up red, it was not possible to

establish a connection

6. To save the connection, exit the Home Connect

settings menu. ~ "Exiting the Home Connect

settings menu" on page 19

7. After successfully connecting, push in the control

knob and turn it counterclockwise to the h position.

Otherwise, it is not possible to operate the appliance

using the Home Connect app.

Connection to the router unsuccessful

1. If a connection could not be established, check the

router and turn the control knob to another position

and then back to the < position.

The illuminated ring around the control knob lights up

blue. After around 5 seconds, the illuminated ring

around the control knob flashes blue and yellow.

2. Switch to the general settings menu of your mobile

device and start the Wi-Fi connection again.

3. Check that the password has been entered correctly.

Connection to the mobile device unsuccessful

1. If a connection could not be established, turn the

control knob to another position and then back to the

< position.

The illuminated ring around the control knob lights up

blue. After around 5 seconds, the illuminated ring

around the control knob flashes blue and white.

2. Launch the Home Connect app on your mobile device

and follow the instructions for automatic network

login.

Connecting more mobile devices to the same Home

Connect account

In the Home Connect app, you can connect more mobile

devices to your appliance.

Connecting more mobile devices to another Home

Connect account

Prerequisite: A mobile device is connected to the

appliance. The appliance can be found in the Home

Connect settings menu.

1. Turn the control knob to another position and then

back to the < position.

The illuminated ring around the control knob flashes

blue and white. The appliance is now ready to connect

to another mobile device.

2. Launch the Home Connect app on your mobile device

and follow the instructions for automatic network

login.

The appliance is available in the app on the mobile

device once the illuminated ring around the control

knob lights up green.

Logging in to your home network

automatically (WPS)

You require a router that has WPS functionality. You will

find information about this in the manual for your router.

You need to be able to access your router.

If this is not the case, follow the steps in ~ "Manual

Registration in the Home Network" on page 18.

1. Push in the control knob and turn it to position 1.

During the connection process, the illuminated ring

around the control knob flashes blue and yellow

alternately.

19

Home Connect en-us

2. Press the WPS button on the router within the next 2

minutes.

Following successful connection to the router, the

illuminated ring around the control knob lights up

green for around 3 seconds. The illuminated ring

around the control knob then flashes blue and white

alternately. The appliance is now ready to connect to

your mobile device.

3. Launch the Home Connect app on your mobile device

and follow the instructions for automatic network

login.

The appliance is available in the app on the mobile

device once the illuminated ring around the control

knob lights up green. If the illuminated ring around the

control knob lights up red, it was not possible to

establish a connection.

4. To save the connection, exit the Home Connect

settings menu.

5. After successfully connecting, push in the control

knob and turn it counterclockwise to the h position.

Otherwise, it is not possible to operate the appliance

using the Home Connect app.

Connection to the router unsuccessful

1. If a connection could not be established, check the

router, and turn the control knob to another position

and then back to position 1.

The illuminated ring around the control knob lights up

blue. After around 5 seconds, the illuminated ring

around the control knob flashes blue and yellow.

2. Switch to the general settings menu of your mobile

device and start the Wi-Fi connection again.

Connection to the mobile device unsuccessful

1. If a connection could not be established, turn the

control knob to another position and then back to

position 1.

The illuminated ring around the control knob lights up

blue. After around 5 seconds, the illuminated ring

around the control knob flashes blue and white.

2. Launch the Home Connect app on your mobile device

and follow the instructions for automatic network

login.

Connecting more mobile devices to the same Home

Connect account

In the Home Connect app, you can connect more mobile

devices to your appliance.

Connecting more mobile devices to another Home

Connect account

Prerequisite: A mobile device is connected to the

appliance. The appliance can be found in the Home

Connect settings menu.

1. Turn the control knob to another position and then

back to position 1.

The illuminated ring around the control knob flashes

blue and white. The appliance is now ready to connect

to another mobile device.

2. Launch the Home Connect app on your mobile device

and follow the instructions for automatic network

login.

The appliance is available in the app on the mobile

device once the illuminated ring around the control

knob lights up green.

Exiting the Home Connect settings

menu

1. Carry out the following operating steps one after the

other without interruption.

2. Close the Home Connect settings menu. ~ "Open

or close the Home Connect settings menu"

on page 16

The illuminated ring on the control knob goes out.

Connecting the appliance to your home

network (LAN)

The appliance must be connected to your home network

using a LAN cable.

1. Connect the LAN cable (RJ45) to the router and the

appliance.

2. Reset the Home Connect connections.~ "Resetting

the Home Connect connections" on page 20

3. Remain in the Home Connect settings menu.

4. Turn the control knob to <.

The illuminated ring around the control knob flashes

blue and white alternately.

5. Start the Home Connect app on the mobile device and

follow the instructions.

6. As soon as the network connection is established, exit

the Home Connect settings menu.~ "Exiting the

Home Connect settings menu" on page 19

7. Push in the control knob and turn it counterclockwise

to the h position. Otherwise, it is not possible to

operate the appliance using the Home Connect app.

20

en-us Home Connect

Switch the wireless network connection

(LAN or WLAN) on or off

You can switch off the LAN or Wi-Fi on your cooktop

extractor system at any time (e.g. to save energy during a

holiday). The connections to the home network and to the

cooktop remain saved. When you switch the LAN or Wi-Fi

back on, the saved connections are applied.

1. Carry out the following operating steps one after the

other without interruption.

2. Open the Home Connect settings menu. ~ "Open

or close the Home Connect settings menu"

on page 16

The illuminated ring around the control knob lights up

blue.

3. Turn the control knob clockwise to position 3. The

illuminated ring around the control knob lights up

green.

After around 5 seconds, the illuminated ring around

the control knob flashes blue. After a few seconds,

the illuminated ring around the control knob lights up

blue. The network connection is deactivated.

4. Close the Home Connect settings menu. ~ "Open

or close the Home Connect settings menu"

on page 16

The illuminated ring on the control knob goes out.

If you want to switch the network connection back on,

work through the same operating sequence. The

illuminated ring around the control knob lights up blue.

After around 5 seconds, the illuminated ring around the

control knob flashes blue and then lights up green.

Note: If the cooktop extractor system is directly

connected to a cooktop, the Wi-Fi can not be switched

off.

Changing from Wi-Fi connection to

LAN connection

1. Connect the cooktop extractor system to the router

(RJ45 cable).

2. Carry out the following operating steps one after the

other without interruption.

3. Open the Home Connect settings menu. ~ "Open

or close the Home Connect settings menu"

on page 16

The illuminated ring around the control knob lights up

green.

4. Turn the control knob clockwise to the μ position.

After approx. 5 seconds, the illuminated ring for the

control knob lights up blue. The connection is

established via LAN.

5. Close the Home Connect settings menu. ~ "Open

or close the Home Connect settings menu"

on page 16

The illuminated ring on the control knob goes out.

Changing from LAN connection to Wi-Fi

connection

1. Carry out the following operating steps one after the

other without interruption.

2. Open the Home Connect settings menu. ~ "Open

or close the Home Connect settings menu"

on page 16

The illuminated ring around the control knob lights up

blue.

3. Turn the control knob clockwise to the μ position.

After approx. 5 seconds, the illuminated ring for the

control knob lights up green. The connection is

established via Wi-Fi.

4. Disconnect the connection between the cooktop

extractor system and the router (RJ45 cable).

Resetting the Home Connect

connections

You can reset the connections you have saved for your

home network and cooktop at any time.

1. Carry out the following operating steps one after the

other without interruption.

2. Open the Home Connect settings menu. ~ "Open

or close the Home Connect settings menu"

on page 16

The illuminated ring around the control knob lights up

blue.

3. Turn the control knob clockwise to the Ž position.

After approx. 30 seconds, the illuminated ring for the

control knob lights up green. All Home Connect

settings have been reset. The appliance will no longer

be displayed in the Home Connect app.

4. Close the Home Connect settings menu. ~ "Open

or close the Home Connect settings menu"

on page 16

The illuminated ring on the control knob goes out.

La page charge ...

Gaggenau VL 414 712 Available Q2 2021 Manuel utilisateur

Ce manuel convient également à

Gaggenau VL 414 712 Available Q2 2021 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents