Polygroup GENERATION II Manuel utilisateur

Marque: Polygroup

Modèle: GENERATION II

Taper: Manuel utilisateur

1. 3. 4.2.

Twinkly

2. Download and install the Twinkly app.

3. Launch Twinkly app.

4. Select GENERATION II controller for your tree. Follow the setup process on the app.

Note: All app illustrations in this document are a mere representation of the functionality

and may vary from the actual app visuals.

Choose your controller

Generation I

Generation II

B. DIRECT Wi-Fi CONNECTIONA. HOME WI-FI NETWORK CONNECTION

Bluetooth

Connecting...

sec

A. Home Wi-Fi network connection (recommended):

B. Direct Wi-Fi connection:

Twinkly2019

1. 2.

SKIP SETUP

Please select the LED count of your Twinkly

Twinkly controller

210 2 70 330

390 4 35 480

540

750

600 660

B. DIRECT Wi-Fi CONNECTION

A. HOME WI-FI NETWORK CONNECTION

Map the layout of your decoration to unlock the full potential of your Twinkly tree

like advanced effects, drawing and many upcoming features.

1. Frame the tree from a distance of 1.5-2.5 meters.

Note:

process and ensure a moderate ambient light (not too dark).

Gallery

Browse, play and edit effects

Create new effects

Group multiple devices together

Download new effects

Apply

Note: App user interface may change due to technical updates and improvements.

1. 3.2. 4.

EDI T AP P L Y ED I T A P PL YEDI T A P PL Y

SNOW

All Favorites

Snow Rainbow Snake

Sparkles Horizontal Flag Vertical Flag

Bright Twinkle Fireworks Candy Cane

Galley

1. 2.

1. Unplug the Twinkly power adapter from the AC outlet. Press and hold the controller button.

2. While holding the button, plug in the Twinkly power adapter.

3. Keep holding the button until all LED lights on the tree turn red, then release the button.

RED

FCC Caution:

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2)

this device must accept any interference received, including interference that may cause undesired operation.

IMPORTANT NOTE:

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee

that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

—Reorient or relocate the receiving antenna.

—Increase the separation between the equipment and receiver.

—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

—Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

This equipment should be installed and operated with minimum distance 20cm between the radiator& your body.

This device complies with Innovation, Science, and Economic Development Canad licence-exempt

RSS standard(s). Operation is subject to the following two conditions:

(1) this device may not cause interference, and

(2) this device must accept any interference, including interference that may cause undesired operation

of the device.

Le présent appareil est conforme aux CNR d' Innovation, Sciences et Développement

économique Canada applicables aux appareils radio exempts de licence.

L'exploitation est autorisée aux deux conditions suivantes :

(1) l'appareil nedoit pas produire de brouillage, et

(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même

si le brouillage est susceptible d'en compromettre le fonctionnement.

The device is compliance with RF exposure guidelines, users can obtain Canadian information on

RF exposure and compliance. The minimum distance from body to use the device is 20cm.

Le présent appareil est conforme Après examen de ce matériel aux conformité ou aux limites d’int

ensité de champ RF, les utilisateurs peuvent sur l’exposition aux radiofréquences et la conformité

and compliance d’acquérir les informations correspondantes. La distance minimale du corps à utili

ser le dispositif est de 20cm.

Polygroup GENERATION II Manuel utilisateur

Marque: Polygroup

Modèle: GENERATION II

Taper: Manuel utilisateur

Télécharger le PDF

rapport

dans d''autres langues

English: Polygroup GENERATION II User manual

Polygroup GENERATION II Manuel utilisateur

Polygroup GENERATION II Manuel utilisateur

dans d''autres langues

Autres documents