Kenwood DDX 6706 S Guide de démarrage rapide

MONITOR WITH DVD RECEIVER

MONITEUR AVEC RÉCEPTEUR DVD

MONITOR CON RECEPTOR DVD

DDX6906S

DDX6706S

DDX5706S

MONITOR WITH RECEIVER

MONITEUR AVEC RÉCEPTEUR

MONITOR CON RECEPTOR

DMX706S

DMX7706S

Quick Start Guide

Guide de démarrage rapide

Guía de inicio rápido

Take the time to read through this instruction manual.

Familiarity with installation and operation procedures will help you obtain the best performance from your new

receiver.

For your records

Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space

provided below. Refer to the model and serial numbers whenever you call upon your KENWOOD dealer for information or

service on the product.

Model DDX6906S/ DDX6706S/ DDX5706S/ DMX706S/ DMX7706S Serial number

US Residence Only

Register Online

Register your KENWOOD product at www.kenwood.com/usa/

Updated information (the la0test Instruction Manual, system updates, new functions, etc.) is

available from <http://www.kenwood.com/cs/ce/>.

Des informations actualisées (le dernier mode d'emploi, les mises à jour du système, les nou-

velles fonctions, etc.) sont disponibles sur le site <http://www.kenwood.com/cs/ce/>.

La información actualizada (el Manual de instrucciones más actualizado, actualizaciones del

sistema, nuevas funciones, etc.) está disponible desde <http://www.kenwood.com/cs/ce/>.

2

About the Quick start guide ................................... 2

How to read this manual ......................................... 2

Precautions ...................................................................3

Initial Settings .............................................................. 4

Adjusting the volume ............................................... 5

Functions of the Buttons on the Front Panel ...6

Turning on the Unit ................................................... 7

Source control screen descriptions ..................... 9

Playing a disc .............................................................10

Connecting a USB device ......................................10

Connect iPod/iPhone ..............................................10

DVD/ VCD Basic Operation) ..................................11

Radio Basic Operation. ...........................................12

Music CD/ Disc media/USB Basic Operation ...13

iPod/iPhone Basic Operation ...............................14

Bluetooth Setup ........................................................15

Using the Hands-Free Unit ....................................16

Before Installation ....................................................18

Installing the unit .....................................................20

About this Unit ..........................................................28

About the Quick start guide

This Quick Start Guide describes basic

functions of this unit.

For functions not described in this Guide, refer

to the Instruction Manual on the following

website:

http://manual.kenwood.com/edition/im400/

To refer to Instruction manual, a PC loaded

with Microsoft® Windows 7 sp1/ 8/ 8.1/ 10

or Mac OS X® v10.11/ macOS v10.12/ 10.13/

10.14 or later is required in addition to Adobe®

Acrobat Reader™ DC or Adobe® Acrobat® DC

or later.

The Instruction manual is subject to change

for modification of specifications and so forth.

Be sure to download the latest edition of the

Instruction manual for reference.

How to read this manual

NOTE

• The panels shown in this guide are examples

used to provide clear explanations of the

operations. For this reason, they may be

different from the actual panels.

If above icons are showed, read the article

applicable to the unit you use.

• The screens and panels shown in this

manual are examples used to provide a clear

explanation of operations.

For this reason, they may be different from

the actual screens or panels, or some display

patterns may be different from the actual

ones.

• Display language: English is used for the

purpose of explanation. You can select a

display language from the [SETUP] menu. See

User Interface Setup (P.66) in the Instruction

Manual.

Contents

3English

Precautions

# WARNINGS

Ñ To prevent injury or fire, take

the following precautions:

• To prevent a short circuit, never put or leave

any metallic objects (such as coins or metallic

tools) inside the unit.

• Do not watch or fix your eyes on the unit’s

display when you are driving for any extended

period.

• If you experience problems during installation,

consult your KENWOOD dealer.

Ñ Precautions on using this unit

• When you purchase optional accessories,

check with your KENWOOD dealer to make

sure that they work with your model and in

your area.

• You can select a language to display menus,

audio file tags, etc. See User Interface Setup

(P.66)

in the Instruction Manual.

• The Radio Data System or Radio Broadcast

Data System feature won’t work in areas

where the service is not supported by any

broadcasting station.

Ñ Protecting the monitor

• To protect the monitor from damage, do not

operate the monitor using a ball point pen or

similar tool with a sharp tip.

Ñ Cleaning the unit

• If the faceplate of this unit is stained, wipe it

with a dry soft cloth such as a silicon cloth.

If the faceplate is stained badly, wipe it with

a cloth moistened with neutral cleaner, then

wipe it again with a clean soft dry cloth.

NOTE

• Applying spray cleaner directly to the unit

may damage its mechanical parts. Wiping the

faceplate with a hard cloth or using a volatile

liquid such as thinner or alcohol may scratch the

surface or erase the screened print.

Ñ Lens fogging

When you turn on the car heater in cold

weather, dew may form on the lens in the

disc player of the unit due to condensation.

This condensation on the lens (also called lens

fogging) may not allow discs to play. In such a

situation, remove the disc and wait for the dew

to evaporate. If the unit still does not operate

normally after a while, consult your KENWOOD

dealer.

Ñ Precautions on handling discs

• Do not touch the recording surface of the disc.

• Do not stick tape etc. on the disc, or use a disc

with tape stuck on it.

• Do not use disc type accessories.

• Clean the disc from the center toward the

outside rim.

• When removing a disc from this unit, pull it out

horizontally.

• If the disc center hole or outside rim has burrs,

use the disc only after removing the burrs with

a ballpoint pen etc.

• Discs that are not round cannot be used.

• 8-cm (3 inch) discs cannot be used.

• Discs with coloring on the recording surface or

discs that are dirty cannot be used.

• This unit can only play the following types of

CDs.

• This unit may not correctly play discs which do

not have the mark.

• You cannot play a disc that has not been

finalized. (For the finalization process, see

your writing software and your recorder's

instruction manual.)

4

Initial Settings

Initial setup

Perform this setup when you use this unit first

time.

1

Set each item as follows.

■ [Language]

Select the language used for the control

screen and setting items. Default is “American

English(en)”.

1 Touch [Language].

2 Touch [Language Select].

3 Select the desired language.

4 Touch [

].

For details of operation, see User Interface

Setup (P.66)

in the Instruction Manual.

■ [Clock]

Sets the synchronization of the clock and

adjusts it.

For detailed operation, see Calendar/clock

settings (P.5).

■ [Display]

Set the button illumination color.

If it is hard to see the image on the screen

even, adjust the viewing angle.

1 Touch [Display].

2 Touch [Key Color].

3 Select the desired color.

4 Touch [

].

5 Touch [Viewing Angle].

6 Select an angle

7 Touch [

].

For details of, see Display Setup (P.68) in the

Instruction Manual.

■ [Camera]

Set the parameters for the camera.

1 Touch [Camera].

2 Set each item and touch [

].

For details of, see Camera Setup (P.62) in

the Instruction Manual.

■ [OEM SETUP]

This function requires a commercial adaptor.

Consult your KENWOOD dealer for details.

■ [DEMO]

Set the demonstration mode. Default is “ON”.

1 Touch [DEMO] and select ON or OFF.

2

Touch [Finish].

NOTE

• These settings can be made from the SETUP

menu. See Setup (P.65)

in the Instruction Manual.

5English

Calendar/clock settings

1

Press the [ ]/[MENU] button.

 Popup menu appears.

2

Touch [SETUP].

 SETUP screen appears.

3

Touch [User Interface].

 User Interface screen appears.

4

Touch [Time Zone] in the User Interface

screen.

5

Select the time zone.

6

Set each item as follows.

Scroll the page to show hidden items.

■ [Time Format]

Select the time display format.

[12-Hour ](Default)/ [24-Hour]

■ [Clock]

[[RDS-SYNC] ](Default): Synchronizes the

clock time with the RDS.

[Manual]: Set the clock manually.

■ [Time Zone]

Select the time zone.

■ [Clock Adjust]

If you select [Manual] for Clock, adjust

the date and time manually (P.66) in the

Instruction Manual.

NOTE

• Please set the date and time. If they are not set,

some functions may not work.

Adjusting the volume

You can adjust the volume (0 to 40).

DDX6906S/ DDX6706S/ DMX706S/

DMX7706S

Press [R] to increase, and press [S] to decrease.

Holding [R] increases the volume continuously

to level 15.

DDX6906S/ DDX6706S

DMX706S/ DMX7706S

DDX5706S

Turn the knob clockwise to increase, and

counter-clockwise to decrease.

6

Basic Operations

Functions of the Buttons on the Front Panel

DDX6906S/ DDX6706S

1

2

3

6

7

4

8 9

DDX5706S

1

4

3

5

7

2

8

DMX706S/ DMX7706S

9 2 5 1 4 7 3

9

7English

NOTE

• The panels shown in this guide are examples used to provide a clear explanation of operations. For this reason,

they may be different from the actual panels.

Number Name Motion

1

[ ]/HOME

• Displays the HOME screen (P.10)

in the Instruction Manual.

• Pressing for 1 second turns the power off.

• When the power is off, turns the power on.

2

S, R

(Volume)

• Adjusts the volume.

The volume will go up to 15 when you keep pressing. (DDX6906S/ DDX6706S/

DMX706S/ DMX7706S only)

3

[ ]/CAM

• Switches view camera display on/off (P.62)

in the Instruction Manual.

– The camera whose view is displayed first changes according to the "Camera

Setup" setting and the shift lever position in the shift gate.

4

[ ]/MENU

• Displays the popup menu screen.

• Pressing for 1 second turns the display off. (DDX5706S/ DMX706S/ DMX7706S only)

5

ATT • Switches attenuation of the volume on/off. (DDX5706S/ DMX706S/ DMX7706S only)

6

• Pressing for 1 second switches attenuation of the volume on/off. (DDX6906S/

DDX6706S only)

7

• Displays the APP (CarPlay/ Android Auto) screen.

• Pressing for 1 second displays the Voice Recognition screen (P.58)

in the Instruction

Manual.

8

Disc insert

slot

• A slot to insert a disc media. (DDX6906S/ DDX6706S/ DDX5706S only)

9

Remote

Sensor

• Receives the remote control signal.

Turning on the Unit

The method of turning on is different

depending on the model.

1

Press the [ ]/[HOME] button.

DDX6906S/ DDX6706S

DDX5706S

DMX706S/ DMX7706S

 The unit is turned on.

● To turn off the unit:

1

Press the [ ]/[HOME] button for 1 second.

NOTE

• If it is your first time to turn the unit on after

installation, it will be necessary to perform Initial

setup (P.4).

8

Select the playback source

1

Press the [ ]/[HOME] button.

 HOME screen appears.

2

Touch [

].

From the screen, you can select the

following sources and functions.

• [Apple CarPlay]: Switches to the Apple

CarPlay screen from the connected

iPhone.

• [Android Auto]: Switches to the Android

Auto screen from the connected Android

device.

• Displays the Hands Free screen.

When connecting as Apple CarPlay

or Android Auto, it works as a phone

provided in Apple CarPlay or Android

Auto.

• Switches to the Radio broadcast.

• Switches to the SiriusXM® satellite radio

broadcast.

• Plays a Bluetooth audio player

• Plays a disc.

(DDX6906S/ DDX6706S/ DDX5706S)

• Plays an iPod/iPhone.

• Plays files on a USB device.

• Switches to Pandora.

• Switches to Spotify.

• Switches to an external component

connected to the AV-IN input terminal.

• Displays the Audio screen.

• Puts the unit in standby.

To select the playback source on the

HOME screen

The 4 items displayed on the source selection

screen with large icons are shown on the

HOME screen.

You can change the items displayed on this

area by customizing the source selection

screen. (P.9)

To select the playback source on the

source control screen

Display source selection buttons by touching

[ ]/[ ] or flicking left or right on the source

control screen, then select a playback source.

Put the unit in standby

1

Press the [ ]/[HOME] button.

 HOME screen appears.

2

Touch [ ].

3

Touch [STANDBY].

9English

Customize Short-cut buttons on

HOME screen

You can arrange the positions of the source

icons as you like.

1

Press the [ ]/[HOME] button.

 HOME screen appears.

2

Touch [ ].

3

Touch and hold the icon which you want

to move in the customizing mode.

4

Drag the icon to the desired position.

Changes the page

Source control screen

descriptions

There are some functions which can be

performed from most screens.

Indicators

1

2

3

4

Short-cut buttons

1

All sources icon

Displays the source selection screen. (P.8)

2

Secondary screen

• [

]/[ ] : The Secondary screen changes to

another one every time you touch it. You can

also change the Secondary screen by flicking

left or right on the screen.

• Indicators: Displays the current source

condition and so on.

– [AT T]: The attenuator is active.

– [DUAL]: The dual zone function is active.

– [MUTE]: The mute function is active.

– [LOUD]: The loudness control function is active.

• Short-cut buttons: The source changes to the

one you have set with a short-cut. For the

short-cut setting, refer to Customize Short-

cut buttons on HOME screen (P.9).

3

Content list

Displays the track/file/station/channel list.

4

Connected Bluetooth device information.

10

Playing a disc

(DDX6906S/ DDX6706S/ DDX5706S)

Ñ Insert a disc

1

Insert the disc into the slot.

 The unit loads the disc and playback

starts.

Ñ Eject a disc

1

Press the [ ]/[MENU] button.

 Popup menu appears.

2

Touch [G].

When removing a disc, pull it horizontally.

NOTE

• This is not displayed on the popup menu screen

of Apple CarPlay or Android Auto source. Change

Apple CarPlay or Android Auto source to other

one to display the popup menu screen.

Connecting a USB device

1

Connect the USB device with the USB

cable. (P.26)

2

Press the [ ]/[HOME] button.

3

Touch [ ].

4

Touch [USB].

Ñ Disconnect the USB device

1

Press the [ ]/[HOME] button.

2

Touch a source other than [USB].

3

Detach the USB device.

Connect iPod/iPhone

Wired connection

1

Connect the iPod/iPhone using the KCA-

iP103. (P.26)

2

Press the [ ]/[HOME] button.

3

Touch [ ].

4

Touch [iPod].

● To disconnect the iPod/iPhone connected

with the cable:

1

Detach the iPod/iPhone.

Bluetooth connection

Pair the iPhone through Bluetooth. (P.15)

11English

DVD/ VCD Basic Operation

(DDX6906S/ DDX6706S/ DDX5706S)

NOTE

• The screen shot below is for DVD. It may be

different from the one for VCD.

1

When the operation buttons are not

displayed on the screen, touch

4

area.

Control screen

1

2

DVD VCD

1

Video screen

4

3

5

3

1

Function panel

Touch the left side of the screen to display the

function panel. Touch again to close the panel.

2

Operation keys

• [E] [F] : Searches for the previous/next

content.

Touch and hold to fast-forward or fast-

backward the disc.

• [DH] : Plays or pauses.

• [

] : Displays the Graphic Equalizer screen

(P.74) in the Instruction Manual.

3

Searching area

Touch to search for the next/previous content.

4

Key display area

Touch to display the control screen.

5

[MENU CTRL] (DVD only)

Touch to display the DVD-VIDEO disc menu

control screen. See DVD Disc Menu Operation

(P.21) in the Instruction Manual.

NOTE

• The control screen disappears when no operation

is done for 5 seconds.

• If you use a remote control, you can jump directly

to the desired image by entering the chapter

number, scene number, play time, etc. (P.79)

in

the Instruction Manual.

12

Radio Basic Operation.

To listen to the Radio source, touch [Radio]

icon on the source selection screen. (P.8)

Control screen

2

3

4

1

5

6

Open the drawer

4

6

Close the drawer

6

4

1

Information display

Displays the information on the current station.

2

Seek mode

Touch to switch seek mode in the following

sequence: [AUTO1], [AUTO2], [MANUAL].

• [AUTO1]: Tunes in a station with good

reception automatically.

• [AUTO2]: Tunes in the memorized stations one

after another.

• [MANUAL]: Switches to the next frequency

manually.

3

Operation keys

• [E] [F] : Tunes in a station. The method of

switching frequencies can be changed (see

2

Seek mode).

• [

] : Displays the Graphic Equalizer screen

(P.74) in the Instruction Manual.

4

Preset list

• Touching [

]/ [ ] allows you to change the

display size.

• Recalls the memorized station.

• When touched for 2 seconds, stores the

currently being received station in the

memory.

5

Band buttons

Switches bands (between FM and AM).

6

Function panel

Touch the left side of the screen to display the

function panel. Touch again to close the panel.

13English

Music CD/ Disc media/USB

Basic Operation

NOTE

• In this manual, “Music CD” means a general CD

which includes music tracks.

“Disc media” means a CD/DVD disc which

includes audio or video files.

• The screen shot below is for disc media. It may be

different from the one for CD.

Control screen

5

1

2

3

4

Open the drawer

3

5

Close the drawer

3

5

4

1

Play mode indicator/ Playing time

• D, B, etc.: Current play mode indicator

Meanings of the icons are as follows: D (play),

B (fast forward), A (fast backward),

H (pause).

• For confirmation of current playing position.

You can drag the circle left or right to change

the playing position. (Video file only)

2

Operation keys

• [1] (Disc media only) : Searches files. For

details on search operation, see File search

Operation (P.20) in the Instruction Manual.

• [E] [F] : Searches for the previous/next

content.

Touch and hold to fast-forward or fast-

backward the disc.

• [DH] : Plays or pauses.

• [

] : Displays the Graphic Equalizer screen

(P.74) in the Instruction Manual.

3

Content list

• Touch the right side of the screen to display

the Content list. Touch again to close the list.

• Displays the playing list. When you touch a

track/file name on the list, playback will start.

4

Artwork

• Displays/hides artwork area.

5

Function panel (Disc media only)

Touch the left side of the screen to display the

function panel. Touch again to close the panel.

Video screen

7

66

6

File search area (Video file only)

Touch to search for the next/previous file.

7

Key display area (Video file only)

Touch to display the control screen.

14

iPod/iPhone Basic Operation

Ñ Connectable iPod/iPhone

The following models can be connected to

this unit.

Made for

• iPhone 7 Plus

• iPhone 7

• iPhone SE

• iPhone 6s Plus

• iPhone 6s

• iPhone 6 Plus

• iPhone 6

• iPhone 5s

• iPhone 5c

• iPhone 5

• iPod touch (6th

generation)

Control screen

3

1

2

4

Open the drawer

5

4

1

Close the drawer

4

1

Artwork

• Displays/hides artwork area.

2

Play mode indicator/ Playing time

• D, B, etc.: Current play mode indicator

Meanings of individual icons are as follows:

D (play), B (fast forward), A (fast

backward), H (pause).

3

Operation keys

• 1] : Searches for a track/file. For details on

search operation, see Search Operation

(P.35) in the Instruction Manual.

• E] [F] : Searches for the previous/next

track/file.

Touch and hold to fast forward or fast

backward.

• [DH] : Plays or pauses.

• [

] : Displays the Graphic Equalizer screen

(P.74) in the Instruction Manual.

4

Content list

• Touch the right side of the screen to display

the Content list. Touch again to close the list.

• Displays the playing list. When you touch a

track/file name on the list, playback will start.

5

[ ] / [ ]

• [

] : Repeats the current track/album. Each

time you touch the key, repeat modes are

switched in the following sequence:

Song repeat ( ), All songs repeat ( ),

Repeat off ( )

• [

] : Randomly plays all tracks in the current

album. Each time you touch the key, random

modes are switched in the following sequence:

Song random ( ), Random off ( )

15English

Bluetooth Setup

1

Press the [ ]/[MENU] button.

 Popup menu appears.

2

Touch [SETUP].

 SETUP screen appears.

3

Touch [Bluetooth].

 Bluetooth Setup screen appears.

See the following section for each

setting.

• Connect the Bluetooth device (P.15)

• Change the device name (P.54) in the

Instruction Manual.

• Change the PIN Code (P.54) in the

Instruction Manual.

Ñ Connect the Bluetooth device

1

Touch [Select Device] on the Bluetooth

Setup screen.

2

Touch the name of the device you want

to connect.

 Profile select screen appears.

NOTE

• If the icon is lighted, it means that the unit will

use that device.

3

Set each profile as follows.

■ [TEL (HFP) 1], [TEL (HFP) 2]

Select when the device is connected with

the unit as hands-free phone 1 or 2.

■ [Audio (A2DP)/App (SPP)]

Select to interwork with an application

installed in a smartphone or to use as an

audio player.

4

Touch [Close].

16

Using the Hands-Free Unit

You can use the telephone function by

connecting the Bluetooth telephone to this

unit.

NOTE

• If you use the hands-free function frequently,

move the TEL short-cut button (icon) to the

HOME screen. (P.9)

• While Apple CarPlay or Android Auto is

connected, the Bluetooth Hands-Free function

and two Bluetooth devices connections cannot

be used. Only the Apple CarPlay or Android Auto

Hands-Free function can be used.

Ñ Make a call

1

Press the [ ]/[HOME] button.

2

Touch [ ].

3

Touch [TEL].

 Hands Free screen appears.

NOTE

• If your cell-phone supports PBAP, you can display

the phone book and call lists onto the touch

panel screen when the cell-phone is connected.

– Phone book: up to 1000 entries

– Up to 50 entries including dialed calls, received

calls, and missed calls

4

Select a dialing method.

• [ ]: Call using call records

• [

]: Call using the phonebook

• [

]: Call using the preset number

• [

]: Call by entering a phone number

● Select the cell-phone to use

When you connect two cell-phones

1) Touch [

] to select the

phone you want to use.

● Bluetooth Setup

1) Touch [

].

Bluetooth Setup screen appears.

● Voice Recognition

1) Touch [

].

NOTE

• Status icons such as battery and antenna icons

may differ from those displayed on the cell-

phone.

• Setting the cell-phone in the private mode can

disable the hands-free function.

17English

Call using call records

1

Touch [ ].

2

Select the phone number from the list.

Call using the preset number

1

Touch [ ].

2

Touch the name or phone number.

Call by entering a phone number

1

Touch [ ].

2

Enter a phone number with number keys.

3

Touch [ ].

Call using the phonebook

1

Touch [ ].

2

Touch [ ].

3

Select the initial.

• Characters with no corresponding name

will not appear.

• A first character with an accent character

such as “ü” can be searched for with a

non-accent character “u” . A character

with an accent character in a sentence

cannot be searched for.

4

Select the person you want to call from

the list.

5

Select the phone number from the list.

18

Connection/Installation

Before Installation

Before installation of this unit, please note the

following precautions.

# WARNINGS

• If you connect the ignition wire (red) and

the battery wire (yellow) to the car chassis

(ground), you may cause a short circuit, that

in turn may start a fire. Always connect those

wires to the power source running through

the fuse box.

• Do not cut out the fuse from the ignition wire

(red) and the battery wire (yellow). The power

supply must be connected to the wires via

the fuse.

# CAUTION

• Install this unit in the console of your vehicle.

Do not touch the metal part of this unit during

and shortly after the use of the unit. Metal part

such as the heat sink and enclosure become

hot.

NOTE

• Mounting and wiring this product requires

skills and experience. For best safety, leave the

mounting and wiring work to professionals.

• Make sure to ground the unit to a negative 12V

DC power supply.

• Do not install the unit in a spot exposed to

direct sunlight or excessive heat or humidity.

Also avoid places with too much dust or the

possibility of water splashing.

• Do not use your own screws. Use only the

screws provided. If you use the wrong screws,

you could damage the unit.

• If the power is not turned ON (“There is an

error in the speaker wiring. Please check the

connections.” is displayed), the speaker wire

may have a short-circuit or touched the chassis

of the vehicle and the protection function may

have been activated. Therefore, the speaker

wire should be checked.

• If your car’s ignition does not have an ACC

position, connect the ignition wires to a power

source that can be turned on and off with the

ignition key. If you connect the ignition wire to

a power source with a constant voltage supply,

such as with battery wires, the battery may be

drained.

• If the console has a lid, make sure to install the

unit so that the front panel will not hit the lid

when closing and opening.

• If the fuse blows, first make sure the wires

aren’t touching to cause a short circuit, then

replace the old fuse with one with the same

rating.

• Insulate unconnected wires with vinyl tape or

other similar material. To prevent a short circuit,

do not remove the caps on the ends of the

unconnected wires or the terminals.

• Connect the speaker wires correctly to the

terminals to which they correspond. The unit

may be damaged or fail to work if you share

the ¤ wires or ground them to any metal part

in the car.

• When only two speakers are being connected

to the system, connect the connectors either

to both the front output terminals or to both

the rear output terminals (do not mix front

and rear). For example, if you connect the ¢

connector of the left speaker to a front output

terminal, do not connect the ¤ connector to

a rear output terminal.

• After the unit is installed, check whether the

brake lamps, blinkers, wipers, etc. on the car

are working properly.

• Mount the unit so that the mounting angle is

30° or less.

19English

• This unit has the cooling fan to decrease the

internal temperature. Do not mount the unit

in a place where the cooling fan of the unit is

blocked. Blocking these openings will inhibit

the cooling of the internal temperature and

result in malfunction.

(DDX6906S/ DDX6706S/ DDX5706S)

Cooling fan

(DMX706S/ DMX7706S)

Cooling fan

• Do not press hard on the panel surface when

installing the unit to the vehicle. Otherwise

scars, damage, or failure may result.

• Reception may drop if there are metal objects

near the Bluetooth antenna.

Bluetooth antenna unit

Ñ Supplied accessories for

installation

1

x1

2

(3 m)

x1

3

x2

4

(M5 x 8 mm)

x6

5

(M5 x 8 mm)

x6

6

x1

7

[1]

(2 m)

x1

[1]

DMX706S/ DMX7706S only

Ñ Installation procedure

1) To prevent a short circuit, remove the key

from the ignition and disconnect the ¤

terminal of the battery.

2) Make the proper input and output wire

connections for each unit.

3) Connect the speaker wires of the wiring

harness.

4) Connect the wiring harness wires in the

following order; ground, battery, ignition.

5) Connect the wiring harness connector to the

unit.

6) Install the unit in your car.

7) Reconnect the ¤ terminal of the battery.

8) Perform the Initial Setup.

See Initial setup (P.4).

20

Installing the unit

Ñ Non-Japanese cars

Bend the tabs of the

mounting sleeve

with a screwdriver

or similar utensil and

attach it in place.

Ñ Japanese cars

4 or 5

Car Bracket

NOTE

• Make sure that the unit is installed securely in

place. If the unit is unstable, it may malfunction

(eg, the sound may skip).

Ñ Trim plate

1) Attach accessory 6 to the unit.

DDX6906S/ DDX6706S/ DDX5706S

A

B

6

B : Narrow

A : Wide

DMX706S/ DMX7706S

6

Ñ Microphone unit

1) Check the installation position of the

microphone (accessory 2).

2) Clean the installation surface.

3) Remove the separator of the microphone

(accessory 2), and stick the microphone to

the place shown below.

4) Wire the microphone cable up to the unit

with it secured at several positions using tape

or other desired method.

5) Adjust the direction of the microphone

(accessory 2) to the driver.

2

Fix a cable with a commercial item of tape.

La page charge ...

Kenwood DDX 6706 S Guide de démarrage rapide

Ce manuel convient également à

Kenwood DDX 6706 S Guide de démarrage rapide

dans d''autres langues

Documents connexes

Autres documents