LG LFX25978 Series Le manuel du propriétaire

Marque: LG

Modèle: LFX25978 Series

Catégorie: Frigos

Taper: Le manuel du propriétaire

OWNER’S MANUAL

FRENCH DOOR

REFRIGERATOR

Please read this manual carefully before operating

your set and retain it for future reference.

MODELS

LFX25976

, LFX21976

P/NO : MFL63728501

www.lge.com

ENGLISH FRANÇAIS ESPAÑOL

IMPORTANT SAFETY INFORMATION

Basic Safety Precautions ........................................3

CFC Disposal ..........................................................4

How to Connect Electricity ......................................5

PARTS AND FEATURES

Special Features .....................................................6

Key Parts and Components ....................................7

INSTALLATION

Choose the Proper Location ...................................8

Clearances ..............................................................8

Flooring ...................................................................9

Handle Removal......................................................9

Refrigerator Door and Freezer Drawer Removal ..10

Light Replacement ................................................16

Connecting the Water Supply ...............................17

Connecting the Water Lines..................................18

Leveling the Refrigerator Doors ............................19

Starting..................................................................20

HOW TO USE

Control Panel Features .........................................21

The LED Display ...................................................22

Adjusting the Temperatures and Display .............23

Operating the Dispenser ......................................24

Setting the Functions ...........................................25

Spaceplus Ice System ..........................................26

Automatic Icemaker .............................................27

Storing Foods .......................................................28

Location of Foods .................................................29

Shelf Height Adjustment .......................................30

CARE AND CLEANING

Removing and Replacing Components ................31

Cleaning the Refrigerator .....................................35

General Information .............................................35

Replacing the Water Filter.....................................36

TROUBLESHOOTING

Before Calling for Service …………………………41

SPECIFICATIONS

Key Dimensions and Specifications .....................47

WARRANTY

Product Registration Information ..........................48

THANK YOU!

Congratulations on your purchase

and welcome to the LG family.

Your new LG French Door

Refrigerator combines

advanced cooling technology

with simple operation and high

efficiency. Follow the operating

and care instructions in this

manual and your refrigerator

will provide you with many years

of reliable service.

BASIC SAFETY PRECAUTIONS

This guide contains many important safety messages. Always read and obey all

safety messages.

w This is the safety alert symbol. It alerts you to safety messages that inform you of hazards that can kill

or hurt you or others or cause damage to the product. All safety messages will be preceded by the safety

alert symbol and the hazard signal word DANGER, WARNING, or CAUTION. These words mean:

wDANGER

You might be killed or seriously injured if you don’t follow instructions.

wWARNING

You can be killed or seriously injured if you don’t follow instructions.

wCAUTION

Indicates an imminently hazardous situation which, if not avoided, may

result in minor or moderate injury, or product damage.

All safety messages will identify the hazard, tell you how to reduce the chance of injury, and tell you

what can happen if the instructions are not followed.

wWARNING

To reduce the risk of fire, electric shock, or

injury to persons when using your product,

basic safety precautions should be followed,

including the following.

Read all instructions before using this appliance.

• NEVER unplug your refrigerator by pulling on the

power cord. Always grip the plug firmly and pull it

straight out from the outlet.

• Repair or replace immediately all electric service

cords that have become frayed or otherwise

damaged. Do not use a cord that shows cracks or

abrasion damage along its length or at either the

plug or connector end.

• When moving your refrigerator away from the wall,

be careful not to roll over or damage the power cord.

• DO NOT store or use gasoline or other flammable

vapors and liquids in the vicinity of this or any other

appliance.

• DO NOT allow children to climb, stand, or hang on

the refrigerator doors or shelves in the refrigerator.

They could damage the refrigerator and seriously

injure themselves.

• Keep fingers out of pinch point areas; clearances

between the doors and cabinet are necessarily

small. Be careful closing doors when children are

in the area.

• Unplug your refrigerator before cleaning or making

any repairs.

NOTE: Service should be performed by a qualified

technician.

• Before replacing a burned-out light bulb, unplug the

refrigerator or turn off power at the circuit breaker

or fuse box in order to avoid contact with a live wire

filament. (A burned-out light bulb may break when

being replaced.)

NOTE: Some models have LED interior lighting and

service should be performed by a qualified

technician.

NOTE: Setting either or both controls to the OFF

position does not remove power to the light circuit.

• When you are finished, reconnect the refrigerator to

the electrical source and reset the control

(Thermostat Refrigerator Control, or Freezer

Control, or Freezer Control, depending on the

model) to the desired setting.

• This refrigerator must be properly installed in

accordance with the Installer Instructions that

were taped to the front of the refrigerator.

• After your refrigerator is in operation, do not touch

the cold surfaces in the freezer compartment when

hands are damp or wet. Skin may adhere to the

extremely cold surfaces.

• In refrigerators with automatic icemakers, avoid

contact with the moving parts of the ejector

mechanism or with the heating element that

releases the cubes. DO NOT place fingers or hands

on the automatic icemaking mechanism while the

refrigerator is plugged in.

• Do not modify or extend the power cord length.

It will cause electric shock or fire.

BASIC SAFETY PRECAUTIONS

(CONT.)

• Do not use drier to dry the inside, nor light a candle

to remove odor.

• Install in places away from the fire such as the place

where flammable gas is leaked.

• This appliance is not intended for use by persons

(including children) with reduced physical, sensory

or mental capabilities, or lack of experience and

knowledge, unless they have been given

supervision or instruction concerning use of the

appliance by a person responsible for their safety.

Children should be supervised to ensure that they

do not play with the appliance.

• DO NOT refreeze frozen foods which have

thawed completely. The United States

Department of Agriculture in Home and Garden

Bulletin No. 69 says:

…You may safely refreeze frozen foods that have

thawed if they still contain ice crystals or if they are

still cold—below 40°F (4°C).

…Thawed ground meats, poultry, or fish that have

any off-odor or off-color should not be refrozen

and should not be eaten. Thawed ice cream

should be discarded. If the odor or color of any

food is poor or questionable, dispose of it. The

food may be dangerous to eat.

Even partial thawing and refreezing reduces the

quality of foods, particularly fruits, vegetables,

and prepared foods. The eating quality of red

meats is affected less than that of many other

foods. Use refrozen foods as soon as possible to

save as much of their quality as you can.

Risk of Child Entrapment

Discarded or abandoned refrigerators are

dangerous, even if they will sit for just a few

days. If you are disposing of your old refrigerator,

please follow the instructions below to help prevent

accidents.

Before you throw away your old refrigerator or

freezer:

• Take off the doors.

• Do not leave the shelves

in place, as children may

climb inside.

CFC DISPOSAL

Your old refrigerator may have a cooling system

that used CFCs (chlorofluorocarbons). CFCs are

believed to harm stratospheric ozone.

If you are throwing away your old refrigerator,

make sure the CFC refrigerant is removed for

proper disposal by a qualified servicer. If you

intentionally release this CFC refrigerant, you can

be subject to fines and imprisonment under

provisions of environmental legislation.

HOW TO CONNECT ELECTRICITY

IMPORTANT: Please read carefully.

wWARNING

Electrical Shock Hazard

For personal safety, this appliance must be

properly grounded. Have the wall outlet and

the circuit checked by a qualified electrician to

make sure the outlet is properly grounded.

RECOMMENDED GROUNDING METHOD

The refrigerator should always be plugged into

its own individual properly grounded electrical

outlet rated for 120 volts, 60 Hz, AC only, and

fused at 20 amperes. This provides the

best performance and also prevents overloading

house wiring circuits which could cause a fire

hazard from overheated wires. It is

recommended that a separate circuit serving

only this appliance be provided.

Use a receptacle which cannot be turned off with

a switch or pull chain. Do not use an extension

cord. Where a standard two-prong wall outlet is

encountered, it is your personal responsibility

and obligation to have it replaced with a properly

grounded three-prong wall outlet.

Do not, under any circumstances, cut or

remove the third (ground) prong from the

power cord.

Do not use an adapter plug.

NOTE: Some models have LED interior lighting and

service should be performed by a qualified technician.

When you are finished, reconnect the refrigerator to

the electrical source and reset the control

(Thermostat, Refrigerator Control, or Freezer Control,

depending on the model) to the desired setting.

USE OF EXTENSION CORDS

Because of potential safety hazards under

certain conditions, we strongly recommend

against the use of an extension cord.

However, if you still elect to use an extension

cord, it is absolutely necessary that it be a UL-listed

(USA), 3-wire grounding-type appliance

extension cord having a grounding-type plug

and outlet and that the electrical rating of the

cord be 20 amperes (minimum) and 120 volts.

Use of an extension cord will increase the

clearance needed for the back of the

refrigerator.

SAVE THESE INSTRUCTIONS

SPECIAL FEATURES

CONTROL PANEL LED DISPLAY SCREEN

Simple electronic controls are user-friendly. The LED

screen shows refrigerator and freezer temperatures,

displays water filter status, dispenser information, and

more.

ICE PLUS

When this feature is activated, the freezer section will

run at the coldest temperature for a 24- hour period to

increase ice production.

FILTERED WATER AND ICE DISPENSER

The water dispenser offers fresh, chilled, filtered

water through the door. The ice dispenser offers

cubed or crushed ice.

DOOR ALARM

A warning alarm sounds at 30-second intervals when

the refrigerator or freezer door is left open for more

than 60 seconds.

SPACEPLUS ICE SYSTEM

The icemaker automatically produces 80–130 ice

cubes in a 24-hour period to keep the ice dispenser

fully supplied. The in-door design creates more shelf

space.

CRISPERS

LG’s crispers preserve humidity and help vegetables

stay crisp.

GLIDE‘N’SERVE

Provides storage space with a variable temperature

control that keeps the compartment colder than

refrigerator.

MULLION

The door mullion folds in when the left

door is opened.

AUTO CLOSING HINGE

When you slightly push the door of the refrigerator,

it is automatically closed. (The door is automatically

closed within 30° of the opening angle.)

NOTE: This guide covers several different models.

The refrigerator you have purchased may have some

or all of the items listed below. The locations of the

features shown below may not match your model.

KEY PARTS AND COMPONENTS

In addition to the special features and components

outlined in the Special Features section, there are

several other important components that are

referenced in this manual.

ADJUSTABLE REFRIGERATOR SHELVING

The refrigerator compartment shelves are

adjustable to allow flexibility for storage needs.

GALLON STORAGE BINS

Three interchangeable bins can be arranged to

suit your storage needs.

REMOVABLE ICE STORAGE BIN

The ice storage bin can be removed to fill ice

buckets, coolers, or pitchers.

LED INTERIOR LAMPS

Refrigerator interior is lit by the LED array.

CAN STORAGE BIN

FIXED DOOR BINS

CHOOSE THE PROPER LOCATION

wWARNING

Excessive Weight Hazard

Two or more people are required when

moving and unpacking the appliance.

• Store and install the refrigerator where it will not

be exposed to temperatures below freezing or

exposed to outdoor weather conditions.

• Install this appliance in an area where the

temperature is between 55°F (13°C) and 110°F

(43°C). If the temperature around the appliance

is too low or too high, cooling ability may be

adversely affected.

• If this refrigerator is installed where the

temperature is above 110°F (43°C), the

freezing capacity is compromised and the cost

of electricity used increases.

• To reduce the risk of electric shock, do not

install the refrigerator in a wet or damp area.

• Select a place where a water supply can be

easily connected for the automatic icemaker

and dispenser.

• Unstable installation may cause vibration and

noise. If the floor is not even, make the

refrigerator level by rotating the height adjusting

screws.

• Properly ground the refrigerator to conform with

all governing codes and ordinances.

wCAUTION

Avoid placing the unit near heat sources,

direct sunlight, or moisture.

CLEARANCES

• Too small a distance from adjacent items may

result in lowered freezing capability and

increased electricity consumption charges.

Allow at least 24 in. (61 cm) in front of the

refrigerator to open the doors.

NOTE: For complete dimensions and specifications,

see page 47.

2" (5.08 cm)

FLOORING

• To minimize noise and vibration, the refrigerator

MUST be installed on a solidly constructed floor.

• To avoid vibration, the unit must be level.

If required, adjust the leveling legs to compensate

for unevenness of the floor. The front should be

slightly higher than the rear to aid in door

closing. The leveling legs can be turned easily

by pushing against the top of the refrigerator to

take the weight off the feet. Turn the leveling

legs clockwise to raise the unit or

counterclockwise to lower it.

• Carpeting and soft tile surfaces are not

recommended.

• Never install the refrigerator on a platform or

weakly supported structure.

NOTE: When moving the refrigerator for cleaning

or service, be sure to protect the floor. Always

pull the refrigerator straight out when moving it.

Do not wiggle or walk the refrigerator when trying

to move it; floor damage could occur.

HANDLE REMOVAL

To move the refrigerator through a house door, it

may be necessary to remove the refrigerator

door handles.

NOTE: Handle appearance may vary from

illustrations on this page.

wCAUTION

• Use special care when removing handles to

prevent scratching the doors.

• The handle could be damaged if you hit it with

a hammer while removing or attaching.

• When you assemble or disassemble a handle,

you must push or pull with reasonable force.

NOTE: It is recommend that the doors be removed when it is necessary to move the refrigerator through a

narrow opening.

Loosen the set screws with a 2.5 mm (3/32")

Allen wrench and remove the handle.

NOTE: If the handle mounting fasteners need

to be tightened or removed, use a 1/4" Allen

wrench.

Loosen the set screws located on the lower

side of the handle with a 3.1 mm (1/8") Allen

wrench and remove the handle.

NOTE: If the handle mounting fasteners need

to be tightened or removed, use a 1/4" Allen

wrench.

Mounting

Fasteners

Set Screw

Allen Wrench

HANDLE REMOVAL

(CONT.)

HANDLE REINSTALLATION

REFRIGERATOR DOOR AND FREEZER DRAWER REMOVAL

REFRIGERATOR DOOR REMOVAL

wWARNING

Electric Shock Hazard

• Disconnect electrical supply to the refrigerator

before installing. Failure to do so could result in

death or serious injury.

• Do not put hands or feet or metal sticks into the air

vents, base grille, or bottom of the refrigerator. You

may be injured or receive an electrical shock.

• Be careful when you work with the hinge, base

grille, and stopper. You may be injured.

Before you begin, remove food and bins from the

doors.

If your entrance door is too narrow for the refrigerator

to pass through, remove the refrigerator door and

move the refrigerator sideways through the doorway.

Place the handle on the door by aligning

handle footprints to fit mounting fasteners and

tighten the set screws with a 2.5 mm (3/32

)

Allen wrench.

NOTE: If the handle mounting fasteners need

to be tightened or removed use a 1/4

Allen

wrench

1 Place the handle on the door by aligning

handle footprints to fit mounting fasteners and

tighten the set screws on the bottom of the

handle with a 3.1 mm (1/8

) Allen wrench.

NOTE: If the handle mounting fasteners need

to be tightened or removed use a 1/4

Allen

wrench.

To remove the left refrigerator door:

Pull the water tube out of the fitting while

pressing the release ring on the fitting.

NOTE : When you pull out the tube, first you

have to push the collet by opposite direction

of arrow in the upper picture and pull the tube

out by direction of arrow.

Mounting

Fasteners

Collet

REFRIGERATOR DOOR AND FREEZER DRAWER REMOVAL

(CONT.)

REFRIGERATOR DOOR REMOVAL

(CONT.)

• Open the door. Remove the top hinge cover

screw (1 ).

• Use a flat blade screwdriver to lift the tabs

on the front underside of the cover(2). Lift up

the cover.

• Remove the cover. Pull out the tube (3).

• Disconnect all the wire harnesses (4).

• Remove the grounding screw(5)

• Rotate hinge lever (6) counterclockwise.

Lift the top hinge (7) free of the hinge lever

latch (8).

IMPORTANT: When lifting the hinge free of

the latch, be careful that the door does not fall

forward.

• Lift the door from the middle hinge pin and

remove the door.

• Place the door, inside facing up, on a non-

scratching surface.

(1)

(2)

(4)

(3)

(6)

(7)

(8)

(5)

2 To remove the right refrigerator door:

• Open the door. Remove the top hinge cover

screw (1 ). Lift up the cover (2).

• Remove the cover.

• Rotate the hinge lever (3) clockwise.

Lift the top hinge (4) free of the hinge lever

latch (5).

IMPORTANT: When lifting the hinge free of

the latch, be careful that the door is heavy

and may fall forward.

• Lift the door from the middle hinge pin and

remove the door.

• Place the door, inside facing up, on a non-

scratching surface.

(1)

(2)

(3)

(4)

(5)

REFRIGERATOR DOOR AND FREEZER DRAWER REMOVAL

(CONT.)

REFRIGERATOR DOOR REINSTALLATION

Install the right-side door first.

• Lower the door onto the middle hinge pin as

shown.

• Make sure the plastic sleeve is inserted in

the bottom of the door.

1 • Fit the top hinge (1) over the hinge lever

latch (2) and into place. Rotate the lever

(3) counterclockwise to secure the hinge.

• Hook the tab on the door-switch side of the

cover (4) under the edge of the wire opening

in the cabinet top. Position the cover into

place. Insert and tighten the cover screw (5).

(3)

(2)

(1)

(5)

(4)

Install the left-side door.

• Lower the door onto middle hinge pin.

3 • Fit the top hinge (1) over the hinge lever

latch (2) and into place. Rotate the lever (3)

clockwise to secure the hinge.

• Install the grounding screw (4) and connect

all the wire harnesses (5).

(2)

(1)

(3)

(4)

(5)

REFRIGERATOR DOOR AND FREEZER DRAWER REMOVAL

(CONT.)

REFRIGERATOR DOOR REINSTALLATION

(CONT.)

• Push the water supply tube (6) into the hole

on the top case and pull it through the

backplate.

(6)

5 Insert the water supply tube into the

connector.

• Insert the tube at least 5/8 in. (15 mm) into

the connector.

• Hook the tab on the door-switch side of the

cover under the edge of the wire opening in

the cabinet top. Position the cover into

place. Insert and tighten the cover screw.

Cover

Cover Screw

wCAUTION

1. Insert the tube until you can see only one of the lines printed on the tube.

2. After inserting, pull the tube to ascertain that it is secure.

3. Assemble the clip.

Collet

Correct Incorrect

Insert Line

Clip

Tube

REFRIGERATOR DOOR AND FREEZER DRAWER REMOVAL

(CONT.)

FREEZER DRAWER REMOVAL

wCAUTION

• Care should be taken to avoid product or property

damage when removing the freezer door. It maybe

necessary to have assistance with the following

insturctions.

• To avoid damage do not hold the handle when

removing the door. It could come off and cause and

injury.

wCAUTION: When you remove the drawer, do not hold the handle. If it may come off and it could cause

personal injury.

wCAUTION: When placing the drawer on the floor, care should be taken to avoid floor damage.

To remove the freezer drawer, pull the drawer

open to full extension. Remove the lower

DuraBase ® basket by lifting the basket from

the rail system.

Separate the left and right rail cover2

With both hands, hold both sides of the door

and pull it up to separate it from the rails.

4 With both hands, flex the center bar enough

to allow the gears on both ends to release

from the track.

Remove the screws of the rail on

both sides.

wWARNING: To prevent accidental child and pet

entrapment or suffocation risk.

DO NOT allow them to play inside of

drawer.

wWARNING: DO NOT step or sit down on freezer.

REFRIGERATOR DOOR AND FREEZER DRAWER REMOVAL

(CONT.)

FREEZER DRAWER REINSTALLATION

wCAUTION

• To avoid possible injury or product or property

damage, you will need two people to perform the

following instructions. It maybe necessary to have

assistance with the following instructions.

wWARNING

Risk of Child Entrapment

• To prevent accidental child and pet entrapment

or suffocation risk, DO NOT allow them to play

inside of the freezer drawer.

• DO NOT step or sit on the freezer drawer.

To reinstall the freezer drawer, hold the center

bar with both hands and pull it out until both

rails are fully extended.

1 Hook door supports (1) into rail tabs (2).

Lower door into final position and tighten the

screws (3). Make sure you have a right rail

cover for each side.

With the drawer pulled out to full extension,

insert the lower basket in the rail assembly.

Align the top holes of the rail cover with the

top holes of the door supports to assemble

the rail covers.

Right

Rail Cover

Assembly Hole

Left

Rail Cover

LIGHT REPLACEMENT

To Change Refrigerator Light

This model has special LED interior lighting

and service should be performed by a qualified

technician.

wWARNING

Electrical Shock Hazard

Before replacing a burned-out light bulb, either unplug

the refrigerator or turn off power at the circuit breaker

or fuse box.

NOTE: Moving the control to the OFF position does

not remove power to the light circuit.

NOTE:

• Not all appliance bulbs will fit your refrigerator.

Be sure to replace the bulb with one of the same

size, shape and wattage.

• The light bulbs will turn off if door is left open for

seven continuous minutes. Shutting door for one

second will light bulbs to come back on.

To Change Freezer Light

1. Unplug refrigerator power cord form outlet.

2. Use a screwdriver to remove the cover screw.

(Save the cover screw)

3. Using a flat instrument,

gently pry the lamp cover

loose in the front as

shown. Rotate downward

to remove the rear tabs.

4. Make sure the bulb is

cool to the touch.

Turn the bulb

counterclockwise to

remove.

5. Replace with a new

60-watt appliance bulb.

6. Insert tabs on back of

cover into slots in freezer

ceiling. Push cover up to

snap front into place.

7. Use a screwdriver to assemble the cover screw.

wCAUTION

• DO NOT place fingers inside of cover.

Lamp may be hot.

CONNECTING THE WATER SUPPLY

wWARNING

Connect to safe drinking water supply

only.

• The water pressure must be between 20 and

120 p.s.i. (1.4~8.4 kgf/cm

) on models without

a water filter and between 43 and 121 p.s.i.

(3~8.5 kgf/cm

) on models with a water filter.

• If water pressure does not reach 20 psi

(1.4 kgf/cm

) or falls below, it is necessary to

purchase a separate pressure pump for normal

automatic icemaker and water dispensing operation.

• It is recommended that the total length of the water

feed tube does not exceed 26 ft. (8 m).

• Install the water supply line where it will not be

affected by heat.

• If a reverse osmosis water filtration system is

connected to your cold water supply, This water line

installation is not warranted by the refrigerator or

icemaker manufacturer. Follow next instructions

carefully to minimize the risk of expensive water

damage.

• If a reverse osmosis water filtration system is

connected to your cold water supply, the water

pressure to the reverse osmosis system needs

to be a minimum of 40 to 60 psi (2.8 kgf/cm

4.2 kgf/cm

, less than 2.0~3.0sec to fill a cup of

7oz capacity).

If the water pressure from the reverse osmosis

system is less than 20 psi (1.4 kgf/cm

, more than

4.0sec to fill a cup of 7oz capacity):

• Check to see whether the sediment filter in the

reverse osmosis system is blocked. Replace the

filter if necessary.

• Allow the storage tank on the reverse osmosis

system to refill after heavy usage.

• If the issue about water pressure from reverse

osmosis remains, call a licensed, qualified plumber.

IMPORTANT: Read all directions thoroughly before

you begin.

• If operating the refrigerator before installing the

water connection, turn the icemaker to the OFF

position to prevent operation without water.

• All installations must be in accordance with local

plumbing code requirements.

• Use copper tubing and check for leaks.

• Install tubing only in areas where temperatures will

remain above freezing.

• It may take up to 24 hours for the icemaker to begin

producing ice.

Tools Required

• Standard screwdriver

• 7/16-in. and 1/2-in. open-end wrenches or two

adjustable wrenches

• 1/4-in. nut driver

• 1/4-in. drill bit

• Hand drill or electric drill (properly grounded)

NOTE: Refrigerator dealers offer a kit with a 1/4-in.

saddle-type shutoff valve, a union, and copper tubing.

Before purchasing, make sure a saddle-type valve

complies with local plumbing codes.

Do not use a piercing-type or 3/16-in. saddle valve

which reduces water flow and clogs more easily.

NOTE: The Commonwealth of Massachusetts

Plumbing Code 248CMR shall be adhered to.

Saddle valves are illegal and use is not permitted in

Massachusetts. Consult with your licensed plumber.

Cold Water Supply

• The icemaker water valve contains a flow washer

which is used as a water pressure regulator.

• The icemaker needs to be connected to a cold water

line with water pressure between 20~120 psi

(1.4~8.4 kgf/cm

) on models without a water filter

and between 43 and 121 p.s.i. (3~8.5 kgf/cm

) on

models with a water filter.

IMPORTANT: Before connecting the tubing to the

refrigerator, be sure the refrigerator power cord is not

plugged into the wall outlet.

NOTE: If your refrigerator is equipped with an internal water

filter, an external in-line water filter should not be used.

• Remove the plastic flexible cap from the water valve.

• Place the compression nut and ferrule (sleeve) onto the

end of the tubing as shown.

• Insert the end of the copper tubing into the connection as

far as possible. While holding the tubing, tighten the fitting.

IMPORTANT: Tighten any connections that leak.

Open the water at the shutoff valve.

• Plug in the refrigerator.

• Arrange the coil of copper tubing behind the refrigerator so

it does not vibrate against the back of the refrigerator or

against the wall.

• Check for leaks.

• Before connecting the water line to house, purge the

house line for 2 minute.

NOTE: It may take a few seconds for water to begin to flow

as the internal tank fills and air clears from the lines.

• Push the refrigerator back to the wall.

• Set the icemaker switch to the ON position.

NOTE: The icemaker will not begin to operate until it

reaches its operating temperature of 15°F (-9°C).

It will then begin operation automatically.

NOTE: Throw away the first few batches of ice (about

20 pieces).

CONNECTING THE WATER LINES

IMPORTANT: Before connecting the tubing to the water

line, unplug the refrigerator or disconnect the power.

• Turn off the main water supply and open the nearest

faucet to relieve pressure in the line. Opening an outside

faucet may help drain water from the line in the house.

• Find a 1/2-in. vertical COLD water pipe near the

refrigerator.

NOTE: A horizontal pipe will work, but the following

precaution must be taken: drill on the top of the pipe, not

the bottom. This will help keep water away from the drill

and also keep normal sediment from collecting in the valve.

• To determine the length of copper tubing you will need,

measure from the connection on the lower left rear of the

refrigerator to the water pipe. Add 7 ft. (2.1 m) to allow for

moving the refrigerator for cleaning. Use 1/4-in. O.D.

(outside diameter) copper tubing. Be sure both ends of

the copper tubing are cut square.

• Using a drill, drill a 1/4-in. hole in the cold water pipe you

have selected.

• Fasten the shutoff valve to the cold water pipe with the

pipe clamp. Be sure the outlet end is solidly in the 1/4-in.

drilled hole in the water pipe and the washer is under the

pipe clamp. Tighten the packing nut. Tighten the pipe

clamp screws carefully and evenly so the washer makes

a watertight seal.

Do not overtighten or you may crush the copper tubing,

especially if soft (coiled) copper tubing is used. Now you

are ready to connect the copper tubing.

• Slip the compression sleeve and the compression nut

onto the copper tubing as shown. Insert the end of the

tubing into the outlet end squarely as far as it will go.

Screw the compression nut onto the outlet end with a

wrench. A flare nut wrench works best, but an open-end

wrench will suffice. Do not overtighten.

• Place the free end of the tubing into a container or sink,

and turn on the main water supply. Flush out the tubing

until the water is clear. Turn off the shutoff valve on the

water pipe. Coil the copper tubing as shown below.

Packing

Nut

Shutoff

Valve

Compression

Sleeve

Compression

Nut

Cold Water Pipe

Pipe Clamp

Coil of Polyethelyne

or Copper Tubing

Ferrule

(Sleeve)

Refrigerator

Connection

Water

valve

Tubing

Clamp

Tubing

Compression

Nut

wWARNING

Electrical Shock Hazard

• Be careful when you work with the hinges,

base grille, and stopper. You may be injured.

• Do not put hands, feet, or metal items into

the air vents, base grille, or the bottom of the

refrigerator. You may be injured or receive

an electrical shock.

Leveling

After installing, secure the product with the LEGS

so it does not move to the right or left.

Your refrigerator has two front leveling legs—

one on the right and one on the left. Adjust the

legs to alter the tilt from front to back or side to

side. If your refrigerator seems unsteady or you

want the doors to close more easily, adjust the

refrigerator’s tilt using the following instructions:

wCAUTION

• To avoid possible injury or product or property

damage, you will need two people to perform the

following instructions.

LEVELING THE REFRIGERATOR DOORS

Plug the power cord into a 3-prong grounded

outlet, and move the refrigerator into its final

position. Remove the kick plate screws and

then the kick plate.

• Open the Freezer Drawer.

• Once the drawer is open, there is sufficient

clearance to remove the screws on top of

the kick plate.

NOTE: To replace the kick plate, place it into

position, and then insert and tighten the

screws.

Level the refrigerator by using an 11/32 inch

(8mm), 11/16 inch (18mm) wrench or a flat

blade screw driver.

Turn the leveling legs (CCW) to raise or (CW)

to lower the height of the front of the

refrigerator.

NOTE: The front of the refrigerator should be

slightly higher than the back.

NOTE: If someone pushes backward against

the top of the refrigerator, weight is lifted off of

the leveling legs, which makes adjustment

easier.

Open both doors to make sure they close

easily. If not, raise the leveling legs higher by

turning both clockwise the same amount.

Once the refrigerator is level, replace the kick-

plate.

NOTE: Your new refrigerator is uniquely

designed with two fresh food doors. Either

door can be independently opened or closed.

You will have to exert slight pressure on the

doors to close them completely.

NOTE: In order not to move the refrigerator

back and forth, fix it with the 'Adjust' to the

floor to install and use.

Kick Plate

LFX21976

LFX25976

STARTING

Before loading your refrigerator with fresh foods:

• Remove tape and any temporary labels from

your refrigerator before using. To remove any

remaining adhesive residue, rub the area briskly

with your thumb, or rub a small amount of liquid

dish soap over the adhesive with your fingers.

Wipe with warm water and dry. Do not use sharp

instruments, rubbing alcohol, flammable fluids,

or abrasive cleaners to remove tape or glue.

NOTE: Do not remove any warning-type labels,

the model and serial number label, or the tech

sheet that is taped to the back of the refrigerator.

• Thoroughly clean your refrigerator and wipe off all

dust that may have accumulated during shipping.

• Install accessories such as the ice cube bin,

drawers, and shelves, in their proper places.

They are packed together to prevent possible

damage during shipment.

• Adjust the desired temperature for the

refrigerator and freezer (see Adjusting the

Temperature and Functions).

• Let your refrigerator run for at least 2 or 3 hours

before putting food in it. Check the flow of cold

air in the freezer compartment to ensure proper

cooling. Your refrigerator is now ready for use.

LEVELING THE REFRIGERATOR DOORS

(CONT.)

DOOR ALIGNMENT

• Use the wrench (Included with the User Manual)

to adjust the bolt in the door hinge to adjust the

height. (counter clockwise to raise or clockwise

to lower)

La page charge ...

LG LFX25978 Series Le manuel du propriétaire

Marque: LG

Modèle: LFX25978 Series

Catégorie: Frigos

Taper: Le manuel du propriétaire

Télécharger le PDF

rapport

dans d''autres langues

English: LG LFX25978 Series Owner's manual
español: LG LFX25978 Series El manual del propietario

LG LFX25978 Series Le manuel du propriétaire

LG LFX25978 Series Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents