ESAB WRS Series 400 AMP 600 AMP Water-Cooled Automation Mig Guns Manuel utilisateur

Issue Date: November 3, 2008 Manual No: 89200005Revision: A

SAFETY AND OPERATING

INSTRUCTIONS

WATER-COOLED

AUTOMATION

MIG GUNS

English

Français

Español

WATER-COOLED

WRS SERIES

400 AMP

600 AMP

WE APPRECIATE YOUR BUSINESS!

Congratulations on your new Tweco

®

Robotics product. We are proud

to have you as our customer and will strive to provide you with the

best service and reliability in the industry. This product is backed

by our extensive warranty and worldwide service network. To locate

your nearest distributor or service agency call 800-426-1888, or visit

us on the web at www.tweco.com.

This Manual has been designed to instruct you on the correct

installation and use of your Tweco

®

Robotics product. Your satisfaction

with this product and its safe operation is our ultimate concern.

Therefore, please take the time to read the entire manual, especially

the Safety Precautions. They will help you to avoid potential hazards

that may exist when working with this product.

YOU ARE IN GOOD COMPANY!

The Brand of Choice for Contractors and Fabricators Worldwide.

Tweco

®

Robotics is a Global Brand of Welding Products for Thermadyne

Industries Inc. We manufacture and supply to major welding industry

sectors worldwide including; Manufacturing, Construction, Mining,

Automotive, Aerospace, Engineering, Rural and DIY/Hobbyist.

We distinguish ourselves from our competition through market-

leading, dependable products that have stood the test of time. We

pride ourselves on technical innovation, competitive prices, excellent

delivery, superior customer service and technical support, together

with excellence in sales and marketing expertise.

Above all, we are committed to develop technologically advanced

products to achieve a safer working environment within the welding

industry.

i

WARNINGS

Read and understand this entire Manual and your employer’s safety practices

before installing, operating, or servicing the equipment. While the information

contained in this Manual represents the Manufacturer’s judgment, the Manufacturer

assumes no liability for its use.

Water-Cooled Automation MIG Guns

Safety and Operating Instructions

Instruction Guide Number: 89200005

Published by:

Thermadyne

®

Industries, Inc.

2800 Airport Rd.

Denton, TX. 76208

(940) 566-2000

www.tweco.com

U.S. Customer Care: (800) 426-1888

International Customer Care: (905) 827-9777

Reproduction of this work, in whole or in part, without written permission of the publisher is

prohibited.

The publisher does not assume and hereby disclaims any liability to any party for any loss

or damage caused by any error or omission in this Manual, whether such error results from

negligence, accident, or any other cause.

Publication Date: November 3, 2008

Record the following information for Warranty purposes:

Where Purchased:

Purchase Date:

Equipment Serial #:

ii

Table of Contents

SECTION 1: INTRODUCTION .................................................................................. 1-1

1.01 How to Use this Manual ................................................................

1-1

1.02 Receipt of Equipment ....................................................................

1-1

SECTION 2: SAFETY PRECAUTIONS .....................................................................

2-2

SECTION 3: MIG GUN SPECIFICATIONS.................................................................3-5

3.01 MIG Gun Classiﬁcation ..................................................................3-5

3.02 MIG Gun Part Number Identiﬁcation .............................................

3-6

SECTION 4: MIG GUN INSTALLATION ....................................................................

4-7

4.01 Standard MIG Gun Installation ......................................................4-7

4.02 Direct Plug ....................................................................................

4-7

4.03 Conductor Tube Installation ..........................................................

4-8

SECTION 5: CONTACT TIPS ...................................................................................

5-9

5.01 Identiﬁcation .................................................................................5-9

5.02 Replacement .................................................................................5-9

SECTION 6: WIRE CONDUIT .................................................................................

6-10

6.01 Identiﬁcation ...............................................................................6-10

6.02 Removal ......................................................................................6-10

6.03 Installation ..................................................................................

6-11

6.04 Bronze Jump Liner ......................................................................6-11

6.05 Connecting Water Line to Tweco Watercooler .............................

6-11

SECTION 7: TROUBLESHOOTING .........................................................................

7-12

SECTION 8: REPLACEMENT PARTS ..................................................................... 8-14

8.01 MIG Gun Parts Listing .................................................................8-14

8.02 Consumable Parts Listing ...........................................................

8-18

SECTION 9: STATEMENT OF WARRANTY ............................................................

9-20

SAFETY AND OPERATING INSTRUCTIONS

1-189200005 Introduction

SECTION 1:

INTRODUCTION

1.01 HOW TO USE THIS MANUAL

Information necessary to perform maintenance and service is contained in this manual. This

information is intended for use by technicians or personnel qualiﬁed to repair and service this

equipment. The information contained in this document, including performance speciﬁcations,

is subject to change without notice. To ensure safe operation, read the entire manual, including

the chapters on safety precautions and warnings.

Throughout this manual, the words WARNING, CAUTION, and NOTE may appear. Pay particular

attention to the information provided under these headings. These special annotations are

easily recognized as follows:

NOTE

NOTE conveys installation, operation, or maintenance information which is

important but not hazard-related.

CAUTION

CAUTION indicates a potentially hazardous situation which, if not avoided, may

result in injury.

WARNING

WARNING indicates a potentially hazardous situation which, if not avoided, could

result in death or serious injury.

1.02 RECEIPT OF EQUIPMENT

When you receive the equipment, check it against the invoice to make sure it is complete and

inspect the equipment for possible damage due to shipping. If there is any damage, notify the

carrier immediately to ﬁle a claim. Furnish complete information concerning damage claims

or shipping errors to the location in your area, listed on the back cover of this manual. Include

a full description of the parts in error.

If you want additional or replacement copies of this CD, please contact Tweco

®

Robotics at the

address and phone number in your area listed on the back cover of this manual. Include the

Manual number (from page i) and CD part number, CDROBOTICS.

2-2

SAFETY AND OPERATING INSTRUCTIONS

89200005Safety Precautions

SECTION 2:

SAFETY PRECAUTIONS

WARNING

SERIOUS INJURY OR DEATH may result if welding and cutting equipment is

not properly installed, used, and maintained. Misuse of this equipment and other

unsafe practices can be hazardous. The operator, supervisor, and helper must read

and understand the following safety warnings and instructions before installing

or using any welding or cutting equipment, and be aware of the dangers of the

welding or cutting process. Training and proper supervision are important for a

safe work place. Keep these instructions for future use. Additional recommended

safety and operating information is referenced in each section.

WARNING

This product contains chemicals, including lead, or otherwise produces chemicals

known to the State of California to cause cancer, birth defects and other

reproductive harm. Wash hands after handling. (California Health & Safety Code

§ 25249.5 et seq.)

ELECTRIC SHOCK CAN CAUSE INJURY OR DEATH

Install and maintain equipment in accordance with the National Electrical Code

(NFPA 70) and local codes. Do not service or repair equipment with power on.

Do not operate equipment with protective insulators or covers removed. Service

or repair to equipment must be done by qualiﬁed and/or trained personnel

only.

Do not contact electrically live parts. Always wear dry welding gloves that are in good condition.

Aluminized, protective clothing can become part of the electrical path. Keep oxygen cylinders,

chains, wires, ropes, cranes, and hoists away from any part of the electrical path. All ground

connections must be checked periodically to determine if they are mechanically strong, and

electrically adequate for the required current. When engaged in AC welding/cutting under wet

conditions or where perspiration is a factor, the use of automatic controls for reducing the no

load voltage is recommended to reduce shock hazards. Accidental contact must be prevented

when using open circuit voltage exceeding 80 volts AC, or 100 volts DC by adequate insulation

or other means. When welding is to be suspended for any length of time, such as during lunch

or overnight, all electrode holders and electrodes should be removed from the electrode holder

and the power supply should be turned off to prevent accidental contact. Keep MIG guns,

electrode holders, Tig torches, Plasma torches, and electrodes away from moisture and water.

See safety and operating references 1, 2, and 8.

SAFETY AND OPERATING INSTRUCTIONS

2-389200005

SMOKE, FUMES, AND GASES CAN BE DANGEROUS TO YOUR HEALTH

Ventilation must be adequate to remove smoke, fumes, and gases during operation

to protect operators and others in the area. Vapors of chlorinated solvents can

form the toxic gas “Phosgene” when exposed to ultraviolet radiation from an

electric arc. All solvents, degreasers, and potential sources of these vapors must

be removed from the operating area. Use air-supplied respirators if ventilation

is not adequate to remove all fumes and gases. Oxygen supports, and vigorously accelerates ﬁre

and should never be used for ventilation.

See safety and operating references 1, 2, 3, and 4.

ARC RAYS, HOT SLAG, AND SPARKS CAN INJURE EYES AND BURN SKIN

Welding and cutting processes produce extreme localized heat and strong

ultraviolet rays. Never attempt to weld/cut without a federally compliant welding

helmet with the proper lens. A number 12 to 14 shade ﬁlter lens provides the

best protection against arc radiation. When in a conﬁned area, prevent the

reﬂected arc rays from entering around the helmet. Approved shielding curtains

and appropriate goggles should be used to provide protection to others in the surrounding area.

Skin should be protected from arc rays, heat, and molten metal. Always wear protective gloves

and clothing. All pockets should be closed and cuffs sewn shut. Leather aprons, sleeves, leggings,

etc. should be worn for out-of-position welding and cutting, or for heavy operations using large

electrodes. Hightop work shoes provide adequate protection from foot burns. For added protection,

use leather spats. Flammable hair preparations should not be used when welding/cutting. Wear

ear plugs to protect ears from sparks. Where work permits, the operator should be enclosed in

an individual booth painted with a low reﬂective material such as zinc oxide.

See safety and operating references 1, 2, and 3.

WELDING SPARKS CAN CAUSE FIRES AND EXPLOSIONS

Combustibles reached by the arc, ﬂame, ﬂying sparks, hot slag, and heated

materials can cause ﬁre and explosions. Remove combustibles from the work

area and/or provide a ﬁre watch. Avoid oily or greasy clothing as a spark may

ignite them. Have a ﬁre extinguisher nearby, and know how to use it. If welding/

cutting is to be done on a metal wall, partition, ceiling, or roof, precautions must

be taken to prevent ignition of nearby combustibles on the other side. Do not

weld/cut containers that have held combustibles. All hollow spaces, cavities, and containers

should be vented prior to welding/cutting to permit the escape of air or gases. Purging with inert

gas is recommended. Never use oxygen in a welding torch. Use only inert gases or inert gas

mixes as required by the process. Use of combustible compressed gases can cause explosions

resulting in personal injury or death. Arcing against any compressed gas cylinder can cause

cylinder damage or explosion. See safety and operating references 1, 2, 5, 7, and 8.

NOISE CAN DAMAGE HEARING

Noise from the air carbon-arc process can damage your hearing. Wear protective

hearing devices to ensure protection when noise levels exceed OHSA standards.

Adequate hearing protection devices must be worn by operators and surrounding

personnel to ensure personal protection against noise.

See safety and operating references 1, 2, and 6.

Safety Precautions

2-4

SAFETY AND OPERATING INSTRUCTIONS

89200005

SAFETY AND OPERATING REFERENCES

1. Code of Federal Regulations (OSHA) Section 29, Part 1910.95, 132, 133, 134, 139, 251,

252, 253, 254 and 1000. U.S. Government Printing Ofﬁce, Washington, DC 20402.

2. ANSI Z49.1 “Safety in Welding and Cutting”.

3. ANSI Z87.1 “Practice for Occupational and Educational Eye and Face Protection”.

4. ANSI Z88.2. “Standard Practice for Respiratory Protection”. American National

Standards Institute, 1430 Broadway, New York, NY 10018.

5. AWS F4.1. “Recommended Safe Practices for Welding and Cutting Containers”.

6. AWS C5.3. “Recommended Practices for Air Carbon-Arc Gouging and Cutting”.

The American Welding Society, 550 NW Lejeune Rd., P.O. Box 351040, Miami, FL

33135.

7. NFPA 51B. “Fire Prevention in Cutting and Welding Processes”.

8. NFPA-7. “National Electrical Code”. National Fire Protection Association, Battery Park,

Quincy, MA 02269.

9. CSA W117.2. “Safety in Welding, Cutting and Allied Processes”. Canadian Standards

Association, 178 Rexdale Blvd., Rexdale, Ontario, Canada M9W 1R3.

Safety Precautions

SAFETY AND OPERATING INSTRUCTIONS

3-589200005

SECTION 3:

MIG GUN SPECIFICATIONS

3.01 MIG GUN CLASSIFICATION

Process MIG/MAG welding

Voltage Class for Welding and Control Circuits L (up to 113 V peak)

Type of Cooling Water

MIG Gun Model

(AMP)

Duty Cycle (AMP)

10% 35% 60% 100%

350 440 420 400 380

400 470 440 420 400

600 700 660 630 600

The above duty cycles were established by testing under the following parameters:

Parameter MIG MAG

Electrode

Aluminum 3% to 5% Magnesium Mild (low carbon) Steel

Type of Voltage

D.C. D.C.

Shielding Gas Argon Argon/CO

2

Mixed Gas (80/20, 75/25)

Gas Flow Rate

30 CFH / 14.2 l/m 30 CFH / 14.2 l/m

Weld Material AIMg3 to AIMg5 Mild (low carbon) Steel

Gun Cable

Length

10 ft./3 m 15 ft./5 m

Electrode size

350 amp = .045"/1,2 mm

400 amp = 1/16"/1,6 mm

600 amp = 1/16"/1,6 mm

MIG Gun Speciﬁcations

3-6

SAFETY AND OPERATING INSTRUCTIONS

89200005

3.02 MIG GUN PART NUMBER IDENTIFICATION

NOTE

Tweco

®

Robotics MIG guns, as a general rule, have a speciﬁc nomenclature

incorporated within each part number to help determine the wire size of each

MIG gun.

Example Part Number:

WRS4043545

Water-Cooled,

Robotics Series

400 amp gun, 4 foot cable

.035-.045" Wire Capacity

Water-Cooled Robotic Series 400 AMP Guns

Part No. Stock No.

WRS400-3545 3044-1320

WRS404-3545 3044-1322

WRS406-3545 3044-1323

WRS408-3545 3044-1324

WRS410-3545 3044-1325

WRS412-3545 3044-1326

WRS415-3545 3044-1327

Water-Cooled Robotic Series 600 AMP Guns

Part No. Stock No.

WRS600-116 3064-1725

WRS604-116 3064-1366

WRS606-116 3064-1367

WRS608-116 3064-1368

WRS610-116 3064-1369

WRS612-116 3064-1370

WRS615-116 3064-1371

MIG Gun Speciﬁcations

SAFETY AND OPERATING INSTRUCTIONS

4-789200005

SECTION 4:

MIG GUN INSTALLATION

NOTE

Be certain that the end user (welder, operator, or helper) reads and understands

these instructions. The welder must also read Section 2, “Safety Precautions”.

WARNING

ELECTRICAL SHOCK MAY KILL.

4.01 STANDARD MIG GUN INSTALLATION

POWER

SOURCE

WIRE FEEDER

GROUND

WORK PIECE

GUN

Figure 1: Standard MIG Gun Installation

4.02 DIRECT PLUG

Direct Plug MIG guns install by directly inserting the Tweco rear connector plug into the feeder

wire guide outlet and tightening the plug retaining screw. Automated MIG guns differ from

other MIG guns in that they do not have the control wire for trigger control. Rear connectors

are available for Lincoln, Miller, and Panasonic, in addition to adapter kits.

MIG Gun Installation

4-8

SAFETY AND OPERATING INSTRUCTIONS

89200005

4.03 CONDUCTOR TUBE INSTALLATION

1. First, remove the nozzle, tip and diffuser from the used conductor tube.

2. Next, remove case cap. Loosen swivel nut with wrench, then pull the conductor tube

from the block and case.

3. Insert new conductor tube by aligning keyway on the tube with the guide pin inside

the block.

4. Tighten the swivel nut on the tube with a wrench, then replace case cap over the

nut.

5. Replace other front-end consumables.

NOTE

The conduit may need to be pulled out of the conductor tube area if the tube is

of a different size. Reference 6.02 for removal of conduit.

Nozzle

Contact Tip

Conductor Tube

Assembly

Spatter Shield

Robot Torch Case

Screw

Robot Block

Assembly

Figure 2: Changing a Conductor Tube

MIG Gun Installation

SAFETY AND OPERATING INSTRUCTIONS

5-989200005

SECTION 5:

CONTACT TIPS

5.01 IDENTIFICATION

Identify contact tips by markings on the side of the tip, for example 14H-45 (1,2 mm).

Figure 3: Contact Tip

5.02 REPLACEMENT

The procedure for removal and installation of a contact tip is similar for all Tweco

®

Robotic

MIG Guns.

NOTE

Replace contact tip if hole is enlarged or deformed.

1. Select the correct contact tip according to the wire used.

2. Remove the nozzle from the gun to reveal the contact tip.

3. Remove the contact tip using pliers. Replace contact tip and tighten securely.

Contact Tips

6-10

SAFETY AND OPERATING INSTRUCTIONS

89200005

SECTION 6:

WIRE CONDUIT

6.01 IDENTIFICATION

Conduits may be identiﬁed by the markings on the conduit stop.

Example Part Number:

R44-3545-8

Robotic, 44 Series

Wire Capacity

Liner length in feet

6.02 REMOVAL

The procedure for removal and installation of a wire conduit is similar for all Tweco

®

Robotic

MIG Guns.

NOTE

Replace kinked liner or if the hole is dirty or worn. Make sure the end of the

liner is smooth.

1. Lay the MIG Gun out on a table or ﬂoor in a straight line. Fully extend the gun and remove

all twists in the cable.

2. Remove the nozzle and the gas diffuser, then loosen the conduit set screw in the handle

of the gun. Then, loosen the conduit set screw in the rear connector plug.

SET SCREW

TWECO PLUG

CONDUIT ASSEMBLY

Figure 4: Conduit

Wire Conduit

SAFETY AND OPERATING INSTRUCTIONS

6-1189200005

6.03 INSTALLATION

1. Uncoil the conduit and lay it in a straight line. Remove any burrs or edges on the liner.

Insert the conduit into the rear connector plug. Push the conduit into the gun with short

strokes without kinking (bending) the liner. If the conduit hangs up, twist the conduit

counterclockwise or gently whip the cable while applying pressure to the conduit.

2. When the conduit is completely in the gun, tighten the rear conduit set screw.

3. Trim the conduit extending from the conductor tube to 1/2"(12,6 mm).

4. File the trimmed conduit end to remove burrs that could interfere with wire feeding or

catch on the diffuser.

5. Replace the diffuser and contact tip. Tighten securely, then replace the nozzle.

6. The MIG gun is now ready to be reinstalled on the feeder.

6.04 BRONZE JUMP LINER

Part No. AWC44-116 (Stock No. 1644-1085)

Using a jump liner improves arc starts and provides an improved current transfer between the

contact tip and aluminum wire. The jump liner can be used for wear issues found inside the

conductor tube area caused by the liner when using stainless steel wires.

6.05 CONNECTING WATER LINE TO TWECO WATERCOOLER

1. Attach the rear blue coolant inlet hose on the MIG gun to the pump connection labeled

“WATER OUT”.

2. Attach the rear red coolant outlet hose on the MIG gun to the sight glass connection

labeled “WATER IN”.

3. Use a minimum water supply of 3/4 gallons/minute (2.84 liters/minute) during

operation. If possible, install the water supply to run when the power source is turned

“on” to avoid damage to torch and/or cable assembly.

CAUTION

Operating a water-cooled torch and cable assembly without water or with restricted

ﬂow will result in damage to the cable assembly.

NOTE

Do not exceed coolant temperature of 155ºF (60ºF).

4. Incorporating a flow switch on water-cooled assemblies is recommended to avoid

catastrophic failure and production loss. For best results, place the flow switch in

line with the water-cooled gun outlet hose. The circuit functions as an emergency

stop, normally-closed circuit. When water flows at .25 gallons/minute or more, the

circuit is closed.

Wire Conduit

7-12

SAFETY AND OPERATING INSTRUCTIONS

89200005

SECTION 7:

TROUBLESHOOTING

Contact tips and nozzles should be cleaned frequently. Spatter buildup may cause bridging

between the nozzle and tip. This could cause electrical shorting between the nozzle and

workpiece as well as poor or improper gas ﬂow.

Regularly inspect the conductor tube, handle, cablehose, and other parts of the MIG gun for

abrasion, cuts, or undue wear. Replace or repair any parts found deﬁcient.

Problem Possible Cause Corrective Action

Wire feed

inconsistent or not

smooth

1. Loose contact tip or diffuser. 1. Tighten contact tip and diffuser

plier-tight.

2. Excessively worn contact tip. 2. Replace contact tip.

3. Spatter buildup on end of

contact tip.

3. Clean or replace contact tip.

4. Sharp bends or kinks in

conduit.

4. Straighten or replace conduit.

5. Dirty or plugged conduit. 5. Replace conduit.

6. Conduit pulled back from

diffuser.

6. Reposition conduit and tighten

front set screw.

7. Machine improperly adjusted. 7. Reset machine as per machine

and wire manufacturer’s

recommendations.

MIG gun running

hot.

1. Loose contact tip or diffuser. 1. Tighten contact tip and diffuser

plier-tight.

2. Loose power connections. 2. Inspect complete gun for loose

connections and repair.

3. Loose or undersized ground

cable or ground clamp.

3. Tighten or replace as required.

4. Operating gun above

recommended amperage

rating.

4. Readjust machine to correct

setting for size of gun being

used.

Porous weld

1. Poor or improper gas ﬂow. 1. Check gas flow out of gun

nozzle. Check for leaks or

restrictions in gas hoses and

connections.

2. Dirty or contaminated wire. 2. Change wire.

3. Base metal contaminated. 3. Replace base metal.

Troubleshooting

SAFETY AND OPERATING INSTRUCTIONS

7-1389200005 Troubleshooting

THIS PAGE LEFT BLANK INTENTIONALLY

8-14

SAFETY AND OPERATING INSTRUCTIONS

89200005

SECTION 8:

REPLACEMENT PARTS

8.01 MIG GUN PARTS LISTING

WRS400 AND 600 SERIES WITH CABLE ASSEMBLY

16

15

16

10

14

12

13

12

11

16

18

17

10

1

2

3

4

5

6

7

8

9

Replacement Parts

SAFETY AND OPERATING INSTRUCTIONS

8-1589200005

Item No. Part No. Stock No. Description

1 -- -- Nozzle Assembly

2

WC24-1 1244-1009 Spatter Shield 400 AMP

WC26-1 1264-1009 Spatter Shield 600 AMP

3 -- -- Contact Tip

4 -- -- Diffuser

5

WC34-R 2044-1034 Pressure Ring 400 AMP

WC36-R 2064-1036 Pressure Ring 600 AMP

NS* 224S 2064-2059 O-Ring 400 and 600 AMP

6

WCS34-H 1344-1844 400 AMP

WCS36-H 1344-1145 Sealed Conductor Tube Housing 500 AMP

7 -- -- Conductor Tube Assembly

NS 224S 2064-2059 O-Ring 400 and 600 AMP

8 WR6H 2066-2006 Conductor Tube Nut Cover

9 WR66-N 2066-2066 Conductor Tube Nut

10 WR6H 2066-2600 Case With Strain Relief Cap

11 WR106 2066-2106 Torch Block Assembly

12 WC146-6 2064-2146 Strain Relief (Front)

13

WC600-4 1764-2107 Cable Assembly With Fittings 4ft. (1,22m)

WC600-6 1764-2108 Cable Assembly With Fittings 6ft. (1,83m)

WC600-8 1764-2109 Cable Assembly With Fittings 8ft. (2,44m)

WC600-10 1764-2101 Cable Assembly With Fittings 10ft. (3m)

WC600-12 1764-2102 Cable Assembly With Fittings 12ft. (4m)

WC600-15 1764-2103 Cable Assembly With Fittings 15ft. (5m)

NS

WC604-WH 1764-2137 Water Inlet Hose 4ft. (1,22m)

WC606-WH 1764-2138 Water Inlet Hose 6ft. (1,83m)

WC608-WH 1764-2139 Water Inlet Hose 8ft. (2,44m)

WC610-WH 1764-2131 Water Inlet Hose 10ft. (3m)

WC612-WH 1764-2132

Water Inlet Hose 12ft. (4m)

WC615-WH 1764-2133 Water Inlet Hose 15ft. (5m)

NS

WC604-PC 1764-2117 Power Cable Assembly 4ft. (1,22m)

WC606-PC 1764-2118 Power Cable Assembly 6ft. (1,83m)

WC608-PC 1764-2119 Power Cable Assembly 8ft. (2,44m)

WC610-PC 1764-2111 Power Cable Assembly 10ft. (3m)

WC612-PC 1764-2112 Power Cable Assembly 12ft. (4m)

WC615-PC 1764-2113 Power Cable Assembly 15ft. (5m)

NS

WC604-GH 1764-2127 Gas Hose Assembly 4ft. (1,22m)

WC606-GH 1764-2128 Gas Hose Assembly 6ft. (1,83m)

WC608-GH 1764-2129 Gas Hose Assembly 8ft. (2,44m)

WC610-GH 1764-2121 Gas Hose Assembly 10ft. (3m)

WC612-GH 1764-2122 Gas Hose Assembly 12ft. (4m)

WC615-GH 1764-2123 Gas Hose Assembly 15ft. (5m)

NS 400LK-J 2044-2100 Outer Jacket - Sold Per Ft.

14 WC603-WH 1764-2130 Outer Water Hose 3ft. (900mm)

15 WC6-170H 2064-2171 Rear Connector Block Assembly

Replacement Parts

8-16

SAFETY AND OPERATING INSTRUCTIONS

89200005

Item No. Part No. Stock No. Description

NS

45B 2050-2045 O-Ring - Front & Rear Block - Power Cable

46B 2062-2046 O-Ring - Front & Rear Block - Gas Hose

35-40-1 2000-2040 O-Ring - Front & Rear Block - Water Hose

16 WR6C 2064-2006 Rear Case Assembly

17

350-174H 2035-2110 Connector Plug Assembly 400amp - Tweco

®

176SH 2066-2177 Connector Plug Assembly 600amp - Tweco

350-174PH 2035-2172 Panasonic

®

Connector Plug

(Uses R44 series Conduit)

R176MH 2060-2184 Miller

®

Connector Plug

(Includes Items #14 & #15)

R174MH 2035-2109 Miller Connector Plug (Includes Items #14 & #15)

R175M-N045 2050-2181 Miller Plug Nipple, .045" (1,0mm) Wire

(Use w/R176MH)

R174M-N045 2040-2192 Miller Plug Nipple, .045" (1,0mm) Wire

(Use w/R174MH)

R175M-N116 2050-2182 Miller Plug Nipple, .062" (1,6mm) WIre

(Use w/R176MH)

R174M-N116 2040-2191 Miller Plug Nipple, .062" (1,6mm) Wire

(Use w/R174MH)

18 -- -- Conduit

* Not Shown

WRS400 AND 600 DIRECT PLUG REPLACEMENT PARTS

W

C

2

4

-

6

2

T

w

e

c

o

1

2

3

7

8

9

10

11

12

14

13

16

15

4

5

6

Replacement Parts

La page charge ...

ESAB WRS Series 400 AMP 600 AMP Water-Cooled Automation Mig Guns Manuel utilisateur

ESAB WRS Series 400 AMP 600 AMP Water-Cooled Automation Mig Guns Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents