Samsung LN46A550P3R Manuel utilisateur

Country

Customer Care Centre

Web Site

AUSTRIA 0800-SAMSUNG (726-7864) www.samsung.com/at

BELGIUM 0032 (0)2 201 24 18 www.samsung.com/be

CZECH REPUBLIC

844 000 844 www.samsung.com/cz

Distributor pro Českou republiku:

Samsung Zrt., česka organizační složka Vyskočilova 4, 14000 Praha 4

DENMARK 70 70 19 70 www.samsung.com/dk

EIRE 0818 717 100 www.samsung.com/ie

FINLAND 030-6227 515 www.samsung.com/

FRANCE

3260 SAMSUNG (€ 0,15/Min)

08 25 08 65 65 (€ 0,15/Min)

www.samsung.com

GERMANY 01805 - SAMSUNG (726-7864) (€ 0,14/Min) www.samsung.com

HUNGARY 06-80-SAMSUNG (726-7864) www.samsung.com

ITALIA 800-SAMSUNG (726-7864) www.samsung.com

LUXEMBURG 0035 (0)2 261 03 710 www.samsung.com/be

NETHERLANDS 0900-SAMSUNG (726-7864) (€ 0,10/Min) www.samsung.com/nl

NORWAY 815-56 480 www.samsung.com/no

POLAND

0 801 801 881

022-607-93-33

www.samsung.com/pl

PORTUGAL 80820-SAMSUNG (726-7864) www.samsung.com/pt

SLOVAKIA 0800-SAMSUNG (726-7864) www.samsung.com/sk

SPAIN 902 10 11 30 www.samsung.com

SWEDEN 0771-400 200 www.samsung.com/se

SWITZERLAND 0800-SAMSUNG (726-7864) www.samsung.com/ch

U.K 0845 SAMSUNG (7267864) www.samsung.com

TURKEY 444 77 11 www.samsung.com

ESTONIA 800-7267 www.samsung.ee

LATVIA 800-7267 www.samsung.com/lv

LITHUANIA 8-800-77777 www.samsung.lt

KAZAHSTAN 8-10-800-500-55-500 www.samsung.kz

KYRGYZSTAN 00-800-500-55-500 -

RUSSIA 8-800-555-55-55 www.samsung.com

TADJIKISTAN 8-10-800-500-55-500 -

UKRAINE 8-800-502-0000 www.samsung.com

UZBEKISTAN 8-10-800-500-55-500 www.samsung.uz

LCD TV

user manual

imagine the possibilities

Thank you for purchasing this Samsung product.

To receive more complete service, please register

your product at

www.samsung.com/global/register

Model Serial No.

BN68-01410A-00

Contact SAMSUNG WORLDWIDE

If you have any questions or comments relating to Samsung products,

please contact the SAMSUNG customer care centre.

BN68-01410A-��-0127.indd 1 2008-02-21 �� 4:18:30

La page charge ...

English - 3

Viewing the Control Panel

The product colour and shape may vary depending on the model.

1

SOURCE

Toggles between all the available input sources

(TV, Ext.1, Ext.2, AV, S-Video, Component, PC,

HDMI1, HDMI2, HDMI3). In the on-screen menu,

use this button as you use the

ENTER

button

on the remote control.

5

Power Indicator

Blinks and turns off when the power is on and

lights up in stand-by mode.

6

(Power)

Press to turn the TV on and off.

7

Remote Control Sensor

Aim the remote control towards this spot on

the TV.

8

Speakers

2

MENU

Press to see an on-screen menu of your TV’s

features.

3

Press to decrease or increase the volume. In the

on-screen menu, use the buttons as you

use the ◄ and ► buttons on the remote control.

4

Press to change channels.

In the on-screen menu, use the

buttons as you use the

▼

and

▲

buttons on

the remote control.

(Without the Remote Control, you can turn on

the TV by using the Channel buttons.)

➣

Front Panel buttons

Touch each button to

operate.

Side Panel buttons

8 8

4

1

2

3

5

6

7

1

2

3

4

6

7

58 8

BN68-01410A-00Eng-0220.indd 3 2008-02-20 �� 11:31:01

La page charge ...

English - 8

Viewing the Menus

1. With the power on, press the MENU button.

The main menu appears on the screen. The menu’ s left side has

icons: Picture, Sound, Channel, Setup, Input.

2. Press the ▲ or ▼ button to select one of the icons.

Then press the

ENTER

button to access the icon’s sub-menu.

3. Press the EXIT button to exit.

The on-screen menus disappear from the screen after about

one minute.

➣

Using the TOOLS Button

You can use the TOOLS button to select your frequently

used functions quickly and easily. The “Tools” menu change

depending on which external input mode you are viewing.

1. Press the TOOLS button.

The “Tools” menu will appear.

2. Press the ▲ or ▼ button to select a menu.

3. Press the ▲/▼/◄/►/

ENTER

buttons to display, change, or

use the selected items. For a more detailed description of each

function, refer to the corresponding page.

Anynet+ (HDMI-CEC), see page 38

Picture Mode, see page 15

Sound Mode, see page 21

Sleep Timer, see page 23

SRS TS XT, see page 21

Energy Saving, see page 26

Dual l-ll, see page 22

PIP, see page 20

Auto Adjustment, see page 29

♦

Tools

Anynet+ (HDMI-CEC)

Picture Mode : Standard

Sound Mode : Custom

Sleep Timer : Off

SRS TS XT : Off

Energy Saving : Off

Dual l-ll : Mono

Move Enter Exit

Picture

Mode : Standard 

Backlight 7

Contrast 95

Brightness 45

Sharpness 50

Colour 50

Tint G50 R50

Detailed Settings 

sMore

TV

Move Enter Return

BN68-01410A-00Eng-0220.indd 8 2008-02-20 �� 11:31:04

La page charge ...

English - 12

Adding / Locking Channels

Using the Channel Manager, you can conveniently lock or add

channels.

1. Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Channel", then press the

ENTER

button.

2. Press the ▲ or ▼ button to select "Channel Manager", then

press the

ENTER

button.

♦ Adding channels

Using the Channel List, you can add channels.

3. Select Channel List by pressing the

ENTER

button.

4. Move to the ( ) eld by pressing the ▲, ▼, ◄ or ►

button, select a channel to be added, and press the

ENTER

button to add the channel.

If you press the

ENTER

button again, the ( ) symbol

next to the channel disappears and the channel is not

added.

“ ” is active when "Child Lock" is selected to "On".

♦ Locking channels

This feature allows you to prevent unauthorized users, such as

children, from watching unsuitable programmes by muting out

video and audio.

5. Press the ▲ or ▼ button to select "Child Lock", then press the

ENTER

button.

6. Select "On" by pressing the ▲ or ▼ button, then press the

ENTER

button.

7. Press the ▲ or ▼ button to select "Channel List", then press

the

ENTER

button.

8. Move to the ( ) eld by pressing the ▲, ▼, ◄ or ► button,

select a channel to be locked, and press the

ENTER

button.

If you press the

ENTER

button again, the ( ) symbol

next to the channel disappears and the channel lock is

cancelled.

A blue screen is displayed when "Child Lock" is activated.

9. Press the EXIT button to exit.

Select "On" or "Off" in "Child Lock" to easily turn the channels which selected on " " to be active

or inactive.

You can select these options by simply pressing the CH LIST

button on the remote control

➣

P 1 C3

Channel List

Move Enter

Page Return

Add Lock

1 / 10

Prog.

0 C--

1 C3

2 BBC 1

3 C74

4 C75

5 C76

6 S3

7 S4

8 S6

9 S7

Channel

Country :

United Kingdom



Auto Store 

Manual Store 

Channel Manager 

Sort 

Name 

Fine Tune 

Move Enter Return

TV

Channel Manager

Channel List 

Child Lock : Off 

Move Enter Return

BN68-01410A-00Eng-0220.indd 12 2008-02-20 �� 11:31:08

English - 13

Sorting the Stored Channels

This operation allows you to change the programme numbers

of the stored channels.

This operation may be necessary after using the auto store.

1. Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Channel", then press the

ENTER

button.

2. Press the ▲ or ▼ button to select "Sort", then press the

ENTER

button.

3. Select the channel number that you wish to change by

pressing the ▲ or ▼ button repeatedly.

Press the

ENTER

button.

The selected channel number and name are moved to right

side.

4. Press the ▲ or ▼ button to move to the position in which you

would like to change and then press the

ENTER

button.

The selected channel is exchanged with the one

previously stored to the chosen number.

5. Repeat steps 3 to 4 for another channel to be sorted.

6. Press the EXIT button to exit.

➣

Assigning Channels Names

Channel names will be assigned automatically when channel

information is broadcast. These names can be changed,

allowing you to assign new names.

1. Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Channel", then press the

ENTER

button.

2. Press the ▲ or ▼ button to select "Name", then press the

ENTER

button.

3. If necessary, select the channel to be assigned to a new

name by pressing the ▲ or ▼ button. Press the

ENTER

button

The selection bar is displayed around the name box.

4.

To... Then...

Select a letter, number or symbol Press the ▲ or ▼ button

Move on the next letter Press the ► button

Move back the previous letter Press the ◄ button

Conrm the name

Press the

ENTER

button

The following characters are available: Letters of the alphabet (A~Z) / Numbers (0~9) / Special

characters (+, -, *, /, space)

5. Repeat steps 3 to 4 for each channel to be assigned to a new name.

6. Press the EXIT button to exit.

➣

Sort

Prog. Ch. Name



0 C--

1 C23 

2 C16

3 C3

4 S1

s

TV

Move Enter Return

Channel

Country :

United Kingdom



Auto Store 

Manual Store 

Channel Manager 

Sort 

Name 

Fine Tune 

TV

Move Enter Return

Name

Move Enter Return

Prog. Ch. Name



0 C-- -----

1 C23 -----

2 C16 -----

3 C3 -----

4 S1 -----

s

TV

Channel

Country :

United Kingdom



Auto Store 

Manual Store 

Channel Manager 

Sort 

Name 

Fine Tune 

Move Enter Return

TV

BN68-01410A-00Eng-0220.indd 13 2008-02-20 �� 11:31:09

English - 14

Fine Tuning Channel Reception

Use fine tuning to manually adjust a particular channel for

optimal reception.

1. Use the number buttons to directly select the channel that

you want to ne tune.

2. Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Channel", then press the

ENTER

button.

3. Press the ▲ or ▼ button to select "Fine Tune", then press

the

ENTER

button.

4. Press the ◄ or ► button to adjust the ne tuning.

Press the

ENTER

button.

5. Press the EXIT button to exit.

Fine tuned channels that have been saved are marked with

an asterisk "*" on the right-hand side of the channel number

in the channel banner. And the channel number turns red.

To reset the ne-tuning, select "Reset" by pressing the ▲ or ▼

button and then press the

ENTER

button.

➣

Channel

Country :

United Kingdom



Auto Store 

Manual Store 

Channel Manager 

Sort 

Name 

Fine Tune 

TV

Move Enter Return

Fine Tune

P 1

0

Reset

Adjust Save Return

BN68-01410A-00Eng-0220.indd 14 2008-02-20 �� 11:31:10

English - 15

Changing the Picture Standard

You can select the type of picture which best corresponds to

your viewing requirements.

1. Press the MENU button to display the menu.

Press the

ENTER

button, to select "Picture".

2. Press the

ENTER

button again, to select "Mode".

3. Press the ▲ or ▼ button to select the desired picture effect.

Press the

ENTER

button.

4. Press the EXIT button to exit.

Dynamic: Selects the picture for high-definition in a bright

room.

Standard: Selects the picture for optimum display in a

normal environment.

Movie: Selects the picture for comfortable display in a dark

room.

♦

The Picture mode must be adjusted separately for each input

source.

You can also press the P.MODE button on the remote control to

select one of the picture settings.

Easy Setting

1. Press the TOOLS button on the remote control.

2. Press the ▲ or ▼ button to select “Picture Mode”.

3. Press the ◄ or ► button to select the desired picture mode.

4. Press the EXIT or TOOLS button to exit.

➣

Picture

Mode : Standard

Backlight 7

Contrast 95

Brightness 45

Sharpness 50

Colour 50

Tint G50 R50

Detailed Settings

sMore

TV

Move Enter Return

Dynamic

Standard

Movie

Picture

Mode : Standard 

Backlight 7

Contrast 95

Brightness 45

Sharpness 50

Colour 50

Tint G50 R50

Detailed Settings 

sMore

TV

Move Enter Return

Tools

Anynet+ (HDMI-CEC)

Picture Mode ◄ Standard ►

Sound Mode : Custom

Sleep Timer : Off

SRS TS XT : Off

Energy Saving : Off

Dual l-ll : Mono

Move Adjust Exit

BN68-01410A-00Eng-0220.indd 15 2008-02-20 �� 11:31:11

La page charge ...

English - 20

Viewing the Picture In Picture (PIP)

You can display a sub picture within the main picture of set

programme or video input. In this way, you can watch the

picture of set programme or video input from any connected

equipment while watching the main picture.

1. Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Setup", then press the

ENTER

button.

2. Press the▲ or ▼ button to select "PIP", then press the

ENTER

button.

3. Select the required option by pressing the ▲ or ▼ button, then

press the

ENTER

button.

4. When you are satisfied with your setting, press the

ENTER

button.

5. Press the EXIT button to exit.

You may notice that the picture in the PIP window becomes

slightly unnatural when you use the main screen to view a game

or karaoke.

Easy Setting

1. Press the TOOLS button on the remote control.

2. Press the ▲ or ▼ button to select “PIP”, then press the

ENTER

button.

3. Press the ▲ or ▼ button to select a particular item.

4. Press the ◄ or ► button to select the required option.

5. Press the EXIT or TOOLS button to exit.

PIP: On/Off

You can activate or deactivate the PIP function.

Main picture Sub picture

Component TV, Ext.1, Ext.2, AV

HDMI 1, 2, 3 TV, Ext.1, Ext.2, AV

PC TV, Ext.1, Ext.2, AV

Source

You can select a source of the sub-picture.

Size: / /

You can select a size of the sub-picture.

If main picture is in "HDMI" mode, "Size" is available.

Position: / / /

You can select a position of the sub-picture.

In Double ( , ) mode, "Position" cannot be selected.

Programme

You can select a channel of the sub-picture only when the "Source" is set to "TV".

➣

♦

➣

♦

➣

♦

Tools

Anynet+ (HDMI-CEC)

Picture Mode : Standard

Sound Mode : Custom

Sleep Timer : Off

SRS TS XT : Off

Energy Saving : Off

PIP

Move Enter Exit

TV

Setup

Plug & Play 

Language : English 

Time 

Light Effect :

In Watching TV



Auto Wall-Mount



Melody : Off 

Entertainment : Off 

Energy Saving : Off 

PIP 

Move Enter Return

Mode : Custom 

Equalizer 

SRS TS XT : Off 

Auto Volume : Off 

Internal Mute : Off 

Reset

Move Enter Return

TV

PIP

PIP : On 

Source : TV 

Size : 

Position : 

Programme : P 1 

Move Enter Return

PIP

PIP : ◄ On ►

Source : TV

Programme : P 1

Size :

Position :

Move Adjust Return

BN68-01410A-00Eng-0220.indd 20 2008-02-20 �� 11:31:15

English - 21

Sound Features

1. Press the MENU button to display the menu. Press the ▲ or ▼

button to select "Sound", then press the

ENTER

button.

2. Select the required option by pressing the ▲ or ▼ button, then

press the

ENTER

button.

3. When you are satised with your setting, press the

ENTER

button.

4. Press the EXIT button to exit.

Mode: Standard/Music/Movie/Speech/Custom

You can select the type of special sound effect to be used when

watching a given broadcast.

Easy Setting

1. Press the TOOLS button on the remote control.

2. Press the ▲ or ▼ button to select "Sound Mode".

3. Press the ◄ or ► button to select the desired sound mode.

4. Press the EXIT or TOOLS button to exit.

Equalizer: Balance/100Hz/300Hz/1kHz/3kHz/10kHz

The sound settings can be adjusted to suit your personal

preferences.

If you make any changes to these settings, the sound mode

is automatically switched to "Custom".

SRS TS XT: Off/On

TruSurround XT is a patented SRS technology that solves the problem of playing 5.1 multichannel

content over two speakers. TruSurround delivers a compelling, virtual surround sound experience

through any two-speaker playback system, including internal television speakers. It is fully compatible

with all multichannel formats.

Easy Setting

1. Press the TOOLS button on the remote control.

2. Press the ▲ or ▼ button to select “SRS TS XT”.

3. Press the ◄ or ► button to select the "Off" or "On".

4. Press the EXIT or TOOLS button to exit.

TruSurround XT, SRS and Symbol are trademarks of SRS Labs, Inc.

TruSurround XT technology is incorporated under license from SRS Labs,

Inc.

Auto Volume: Off/On

Each broadcasting station has its own signal conditions, and so it is not easy to adjust the volume

every time the channel is changed. This feature lets you automatically adjust the volume of the

desired channel by lowering the sound output when the modulation signal is high or by raising the

sound output when the modulation signal is low.

♦

➣

♦

TV

Sound

Mode : Custom 

Equalizer 

SRS TS XT : Off 

Auto Volume : Off 

TV Speaker : On 

Sound Select : Main 

Move Enter Return

Equalizer

Balance 100Hz 300Hz 1kHz 3kHz 10kHz

Move Adjust Return

TV

R

L

TV

Tools

Anynet+ (HDMI-CEC)

Picture Mode : Standard

Sound Mode ◄ Custom ►

Sleep Timer : Off

SRS TS XT : Off

Energy Saving : Off

Dual l-ll : Mono

Move Adjust Exit

Tools

Anynet+ (HDMI-CEC)

Picture Mode : Standard

Sound Mode : Custom

Sleep Timer : Off

SRS TS XT ◄ Off ►

Energy Saving : Off

Dual l-ll : Mono

Move Adjust Exit

BN68-01410A-00Eng-0220.indd 21 2008-02-20 �� 11:31:16

La page charge ...

English - 23

Setting and Displaying the Current Time

You can set the TV’s clock so that the current time is

displayed when you press the INFO button. You must also set

the time if you wish to use the automatic On/Off timers.

1. Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Setup", then press the

ENTER

button.

2. Press the ▲ or ▼ button to select "Time", then press the

ENTER

button.

3. Press the

ENTER

button to select "Clock Set".

4.

5. Press the EXIT button to exit.

The current time will appear every time you press the INFO button.

You can also set "Year", "Month", "Day", "Hour" and "Minute" by pressing the number buttons on the

remote control.

➣

To... Press the....

Move to "Month", "Day", "Year", "Hour"

or "Minute"

◄ or ► button.

Set the "Month", "Day", "Year", "Hour"

or "Minute"

▲ or ▼ button.

Conrm the setting

ENTER

button

Setting the Sleep Timer

You can select a time period of between 30 and 180 minutes

after which the television automatically switches to standby

mode.

1. Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Setup", then press the

ENTER

button.

2. Press the ▲ or ▼ button to select "Time", then press the

ENTER

button.

3. Press the ▲ or ▼ button to select "Sleep Timer", then press

the

ENTER

button.

4. Press the ▲ or ▼ button repeatedly until the desired time

appears (Off, 30, 60, 90, 120, 150, 180).

Press the

ENTER

button.

5. Press the EXIT button to exit.

The TV automatically switches to standby mode when the

timer reaches 0.

Easy Setting

1. Press the TOOLS button on the remote control.

2. Press the ▲ or ▼ button to select “Sleep Timer”.

3. Press the ◄ or ► button to select the minute.

4. Press the EXIT or TOOLS button to exit.

➣

Tools

Anynet+ (HDMI-CEC)

Picture Mode : Standard

Sound Mode : Custom

Sleep Timer ◄ Off ►

SRS TS XT : Off

Energy Saving : Off

Dual l-ll : Mono

Move Adjust Exit

Mode : Custom 

Equalizer 

SRS TS XT : Off 

Auto Volume : Off 

Internal Mute : Off 

Reset

Move Enter Return

TV

Setup

Plug & Play 

Language : English 

Time 

Light Effect :

In Watching TV



Auto Wall-Mount



Melody : Off 

Entertainment : Off 

Energy Saving : Off 

PIP 

Move Enter Return

TV

Clock Set

Month

01

Day

p

q

01

2008

Year

00

Hour

00

Minute

Move Adjust Return

Mode : Custom 

Equalizer 

SRS TS XT : Off 

Auto Volume : Off 

Internal Mute : Off 

Reset

Move Enter Return

TV

Setup

Plug & Play 

Language : English 

Time 

Light Effect :

In Watching TV



Auto Wall-Mount



Melody : Off 

Entertainment : Off 

Energy Saving : Off 

PIP 

Move Enter Return

Time

Clock Set : 00:00

Sleep Timer :

Timer 1 :

Timer 2 :

Timer 3 :

Move Enter Return

TV

Off

30

60

90

120

150

180

BN68-01410A-00Eng-0220.indd 23 2008-02-20 �� 11:31:18

English - 24

Switching the Television On and Off Automatically

1. Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Setup", then press the

ENTER

button.

2. Press the ▲ or ▼ button to select "Time", then press the

ENTER

button.

3. Press the ▲ or ▼ button to select "Timer 1", "Timer 2",

"Timer 3", then press the

ENTER

button.

Three different On/Off Timer Settings can be made.

You must set the clock first.

4. Press the ◄ or ► button to select the required item below.

Press the ▲ or ▼ button to adjust to the setting satised.

On Time : Select hour, minute and "Activate"/"Inactivate".

(To activate timer with the setting satised, set to "Activate".)

Off Time : Select hour, minute and "Activate"/"Inactivate".

(To activate timer with the setting satised, set to "Activate".)

Volume : Select the desired turn on volume level.

Repeat : Select "Once", "Everyday", "Mon~Fri", "Mon~Sat" or "Sat~Sun".

Programme : When the On Timer is active, you can turn on a specic channel.

You can set the hour and minute directly by pressing the number buttons on the remote control.

Auto Power Off

When you set the timer On, the TV will eventually turn off, if no controls are operated for 3 hours

after the TV was turned on by timer. This function is only available in timer On mode and prevents

overheating, which may occur if a TV is on for too long time.

➣

♦

➣

Choosing Your Language

When you start using your set for the first time, you must

select the language which will be used for displaying menus

and indications.

1. Press the MENU button to display the on-screen menu.

Press the ▲ or ▼ button to select "Setup", then press the

ENTER

button.

2. Press the ▲ or ▼ button to select "Language", then press

the

ENTER

button.

3. Select a particular language by pressing the ▲ or ▼ button

repeatedly.

Press the

ENTER

button.

4. Press the EXIT button to exit.

TV

Setup

Plug & Play 

Language : English 

Time 

Light Effect :

In Watching TV



Auto Wall-Mount



Melody : Off 

Entertainment : Off 

Energy Saving : Off 

PIP 

Move Enter Return

TV

Setup

Plug & Play 

Language : English 

Time 

Light Effect :

In Watching TV



Auto Wall-Mount



Melody : Off 

Entertainment : Off 

Energy Saving : Off 

PIP 

Move Enter Return

TV

Timer 1

On Time

Repeat

Once

00

5

6

:

Off Time

00

:

►

Move Adjust Return

Inactivate

10

Volume

00

1

Programme

BN68-01410A-00Eng-0220.indd 24 2008-02-20 �� 11:31:19

La page charge ...

English - 28

Display Modes

Both screen position and size will vary depending on the type of PC monitor and its resolution.

The resolutions in the table are recommended.

D-Sub Input

Mode Resolution

Horizontal

Frequency (kHz)

Vertical

Frequency (Hz)

Pixel Clock

Frequency (MHz)

Sync Polarity

(H/V)

IBM

640 x 350

720 x 400

31.469

70.086

70.087

25.175

28.322

+ / -

- / +

VESA

640 x 480

800 x 600

1024 x 768

1280 x 1024

1360 x 768

1600 x 1200

31.469

37.861

37.500

37.879

48.077

46.875

48.363

56.476

60.023

63.981

79.976

47.712

75.000

59.940

72.809

75.000

60.317

72.188

75.000

60.004

70.069

75.029

60.020

75.025

60.015

60.000

25.175

31.500

40.000

50.000

49.500

65.000

75.000

78.750

108.000

135.000

85.500

162.000

- / -

+ / +

- / -

+ / +

CVT 1920 x 1080RB 66.587 59.934 138.500 + / -

HDMI/DVI Input

Mode Resolution

Horizontal

Frequency (kHz)

Vertical

Frequency (Hz)

Pixel Clock

Frequency (MHz)

Sync Polarity

(H/V)

VESA

640 x 480

800 x 600

1024 x 768

1280 x 1024

1360 x 768

1600 x 1200

31.469

37.879

48.363

63.981

47.712

75.000

59.940

60.317

60.004

60.020

60.015

60.000

25.175

40.000

65.000

108.000

85.500

162.000

- / -

+ / +

- / -

+ / +

CEA 1920 x 1080p 67.500 60.000 148.500 + / +

When using an HDMI/DVI cable connection, you must use the HDMI IN 2 jack.

The interlace mode is not supported.

The set might operate abnormally if a non-standard video format is selected.

Separate and Composite modes are supported. SOG is not supported.

Too long or low quality VGA cable can cause picture noise at high resolution modes

(1920x1080 or 1600x1200).

➣

Setting up Your PC Software (Based on Windows XP)

The Windows display-settings for a typical computer are shown below. The

actual screens on your PC may be different depending upon your particular

version of Windows and your particular video card. Even if your actual screens

look different, the same, basic set-up information will apply in almost all cases.

(If not, contact your computer manufacturer or Samsung Dealer.)

1. First, click on "Control Panel" on the Windows start menu.

2. When the control panel window appears, click on "Appearance and Themes"

and a display dialog-box will appear.

3. When the control panel window appears, click on "Display" and a display

dialog-box will appear.

4. Navigate to the "Settings" tab on the display dialog-box.

The correct size setting (resolution): Optimum- 1920 X 1080

If a vertical-frequency option exists on your display settings dialog box, the correct value is

"60" or "60 Hz". Otherwise, just click "OK" and exit the dialog box.

BN68-01410A-00Eng-0220.indd 28 2008-02-20 �� 11:31:22

English - 29

Setting up the TV with your PC

Press the SOURCE button to select PC mode.

1. Press the MENU button to display the menu.

Press the ENTER button, to select "Picture".

2. Select the required option by pressing the ▲ or ▼ button,

then press the ENTER button.

3. When you are satised with your setting, press the ENTER

button.

4. Press the EXIT button to exit.

Auto Adjustment

Auto adjustment allows the PC screen of set to self-adjust to

the incoming PC video signal. The values of fine, coarse and

position are adjusted automatically.

Easy Setting

1. Press the TOOLS button on the remote control.

2. Press the ▲ or ▼ button to select “Auto Adjustment”, then

press the ENTER button.

Screen:

Coarse/Fine

The purpose of picture quality adjustment is to remove or reduce

picture noise. If the noise is not removed by Fine-tuning alone,

then adjust the frequency as best as possible (coarse) and Fine-

tune again. After the noise has been reduced,

readjust the picture so that it is aligned on the center of screen.

Press the ▲ or ▼ button to select "Coarse" or "Fine", then press

the ENTER button.

Press the ◄ or ► button to adjust the screen quality.

Press the ENTER button.

Position

Adjust the PC’s screen positioning if it does not fit the TV screen.

Press the ▲ or ▼ button to adjusting the Vertical-Position.

Press the ◄ or ► button to adjust the Horizontal-Position.

Press the ENTER button.

Image Reset

You can replace all image settings with the factory default

values.

➣

♦

Auto Adjustment in progress

Please wait.

TV

Screen

Coarse 50

Fine 93

Position 

Image Reset 

Move Enter Return

Picture

Mode : Standard 

Backlight 7

Contrast 95

Brightness 45

Sharpness 50

Auto Adjustment 

Screen 

Detailed Settings 

sMore

TV

Move Enter Return

TV

Position

Move Enter Return

TV

Screen

Coarse 50

Fine 93

Position 

Image Reset 

Move Enter Return

Tools

Anynet+ (HDMI-CEC)

Picture Mode : Standard

Sound Mode : Custom

Sleep Timer : Off

SRS TS XT : Off

Energy Saving : Off

PIP

Auto Adjustment

Move Enter Exit

BN68-01410A-00Eng-0220.indd 29 2008-02-20 �� 11:31:24

La page charge ...

English - 31

Using the WISELINK Menu

1. Press the MENU button. Press the ▲ or ▼ button to select

“Input”, then press the ENTER button.

2. Press the ▲ or ▼ button to select “WISELINK”, then press the

ENTER button.

3. Press the ▲ or ▼ button to select the corresponding USB

Memory Device, then press the ENTER button.

The "WISELINK" menu differs depending on the USB

Memory Device connected to TV.

Some devices may not be supported due to compatibility

problems.

4. Press the ◄ or ► button to move to an icon, then press the

ENTER button.

To exit WISELINK mode, press the W.LINK button on the

remote control.

Press the W.LINK button on the remote control to display a

WISELINK menu.

Using the Remote Control Button in WISELINK Menu

Button Operations

▲/ ▼/ ◄/ ► Move the cursor and select an item.

ENTER

Select the currently selected item.

Play the Slide Show or MP3 file.

Pause the Slide Show or MP3 file.

RETURN Return to the previous menu.

INFO Run various functions from the Photo and Music menus.

Stop the current slide show or MP3 file.

Page Up or Down (file list item)

EXIT Stop the current function and return to the previous high-level menu.

➣

Input

Source List : TV ►

Edit Name ►

Anynet+ (HDMI-CEC)

WISELINK

TV

Move Enter Return

Move Enter Exit

SUM

STORAGE DEVICE

Move Enter Return

SUM

861MB/994MBFree

Photo

Photo Music Setup

BN68-01410A-00Eng-0220.indd 31 2008-02-20 �� 11:31:36

English - 32

Using the PHOTO (JPEG) List

This menu shows JPEG les and folders saved on an USB memory

device.

1. Complete Steps 1 to 3 of “Using the WISELINK Menu”.

(Refer to page 31)

2. Press the ◄ or ► button to move to “Photo”, then press the

ENTER button. The saved le information is displayed as a

folder or le.

3. Press the ▲, ▼, ◄ and ► buttons to select a le.

• Pressing the ENTER button over a photo icon shows the

currently selected photo in full screen.

• Pressing the ENTER button over a folder icon shows the

JPEG les included in the folder.

To exit WISELINK mode, press the W.LINK button on the

remote control.

Moving to a photo may take a few seconds to load the le.

At this point, the icon will appear at the top left

of the screen.

It takes time to show JPEG les as Thumbnail images.

This menu only shows les whose le extension is jpg. Files of other formats such as bmp or tiff

will not be displayed.

The les are displayed on a page. 15 thumbnail photos are displayed per page.

The thumbnails are numbered from left to right and from top to bottom, from 1 to 15.

Certain types of USB Digital camera and audio devices may not be compatible with this TV.

Folders are displayed rst and they are followed by all JPEG les in the current folder. The

folders and JPEG les are sorted in alphabetical order.

If the photo is displayed in full screen, you can zoom in and out or rotate the photo on the screen.

While a full screen is displayed, ◄ or ► button will let you see another photo image in the same

folder.

Press the button when a Photo icon is selected to start a Slide Show.

Photos without EXIF information may not be displayed as thumbnail images in the PHOTO LIST

depending on the picture quality and resolution.

Viewing a Slide Show

4. Press the INFO button to display the option("Start Slide Show",

"Select All").

5. Press the ▲ or ▼ button to select “Start Slide Show” then

press the ENTER button.

During the slide show, les are displayed in order from the

currently shown le.

MP3 les can be automatically played during the Slide

Show if the Default Background Music is set to On. To

enable this function, MP3 les and other photo les must

be located in the same folder on the USB Memory Device.

6. Press the INFO button during the slide show to set the

following options ("Slide Show Speed", "Background Music",

"Background Music Setting", "List"). Press the ▲ or ▼ button

to select the option, then press the ENTER button.

• After setting the option press the ENTER button to make a

change.

➣

Upper Folder

Forder1

Photo 0001 Photo 0001 None

File 4 File 5 File 6 File 7 File 8

File 9 File 10 File 11 File 12 File 13

Select Move Enter

INFO

Option Return

Photo

1/10 Page

580*440

47KB

Jun 1,2008

3/23

895MB/993MB

SUM

Upper Folder

Forder1

Photo 0001 Photo 0001 None

File 4 File 5 File 6 File 7 File 8

File 9 File 10 File 11 File 12 File 13

Select Move Enter

INFO

Option Return

Photo

1/10 Page

580*440

47KB

Jun 1,2008

3/23

895MB/993MB

Start Slide Show

Select All

INFO

Exit

Slide Show Speed Nomal►

Background Music

On ►

Background Music Setting

List

INFO

Exit

Move Enter Return

SUM

861MB/994MBFree

Photo

Photo Music Setup

BN68-01410A-00Eng-0220.indd 32 2008-02-20 �� 11:31:46

English - 33

Using the Menu during a Slide Show

Slide Show Speed:

Select to control the slide show speed.

Press the ▲ or ▼ button to select the required option

("Fast", "Normal", "Slow"), then press the ENTER button.

Background Music:

Select to choose whether you want to play an MP3 le during a

slide show.

Press the ▲ or ▼ button to select the required option("On", "Off"),

then press the ENTER button.

Background Music Setting:

While the slide show is in progress, MP3 les and folders under the

same directory are displayed.

Select a folder using the ▲ or ▼ button and press the ENTER

button. The selected folder will be highlighted. Press the RETURN

button again to return to the slide show screen. The selected

background music is played.

If you turn Off the Background Music, even if the Background

Music Settings have been set up, the background music will

not be played.

List:

The le information is displayed as a folder or JPEG le.

To exit WISELINK mode, press the W.LINK button on the remote

control.

When selecting a photo le, the photo le information is

displayed on the left side of the TV screen, such as the

resolution, the date modied and the order of the le in the

current directory (e.g. 10th out of 15).

➣

: Folder icon

: Photo icon

: Move to the previous

folder stage icon

Upper Folder

01-001

02-002

03-003

04-004

05-005

Select

Move Enter Return

◄◄ 1/1 Page ►►

Background Music Setting

Choose file for background music

Upper Folder

Forder1

Photo 0001 Photo 0001 None

File 4 File 5 File 6 File 7 File 8

File 9 File 10 File 11 File 12 File 13

Select Move Enter

INFO

Option Return

Photo

1/10 Page

580*440

47KB

Jun 1,2008

3/23

895MB/993MB

SUM

Upper Folder

Forder1

Photo 0001 Photo 0001 None

File 4 File 5 File 6 File 7 File 8

File 9 File 10 File 11 File 12 File 13

Select Move Enter

INFO

Option Return

Photo

1/10 Page

580*440

47KB

Jun 1,2008

3/23

895MB/993MB

SUM

Photo

580*440

47KB

Jun 1,2008

3/23

Such as the resolution

Order of the file in the

current directory

Date modified

File Size

Slide Show Speed Nomal

Background Music

On ►

Background Music Setting

List

INFO

Exit

Fast

Nomal

Slow

Slide Show Speed Nomal►

Background Music

On

Background Music Setting

List

INFO

Exit

Off

On

BN68-01410A-00Eng-0220.indd 33 2008-02-20 �� 11:31:48

La page charge ...

English - 35

Using the MP3 List

This menu shows MP3 les from among the les saved on a USB

memory device.

1. Complete Steps 1 to 3 of “Using the WISELINK Menu”.

(Refer to page 31)

2. Press the ◄ or ► button to move to “Music”, then press the

ENTER button. The saved le information is displayed as a

folder or le.

3. Press the ▲ or ▼ button to move to an icon, then press the

ENTER button.

Pressing the ENTER button over a musical note icon

immediately plays the music le.

Pressing the ENTER button over a folder icon shows the

music les included in the folder.

To select a le on the next page, press the or button

to move to the next page.

4. To select all les or a le, press the INFO button to display the

Music menus. Press the ENTER button to select “Play”,

“Repeat Music” or “Select All”.

To exit WISELINK mode, press the W.LINK button on the remote

control.

Using the Option Menu

Play:

Select to play MP3 files.

Press the button while playing an MP3 le to pause the le.

Press the button to exit Play mode.

This menu only shows les with the MP3 le extension. Files with other le extensions are not

displayed,even if they are saved on the same USB device.

The selected le is displayed on the top with its playing time.

To adjust the music volume, press the VOL +, VOL - button on the remote control. To mute the

sound, press the MUTE button on the remote control.

Repeat Music:

Select to repeatedly play MP3 les in the current folder.

You can select On or Off.

Music function information icon

: When all music les are being played.

: When a music le is being played.

/

:

When pressing the

/

button on the remote control while music is playing.

: When pressing the button on the remote control when music is stopped.

•

➣

: Folder icon

: Music icon

: Move to the previous

folder stage icon

Move Enter Return

SUM

861MB/994MBFree

Music

Photo Music Setup

Upper Folder

00:04:01

00:04:28

00:04:12

00:05:39

00:04:30

00:03:54

00:05:25

Folder 1

001-001

002-002

003-003

004-004

005-005

007-007

008-008

006-006

00:04:00

Select Move Enter

INFO

Option Return

Music

1/10 Page

5MB

Jun 1,2008

3/23

Play

Repeat Music Off

►

Select All

INFO

Exit

BN68-01410A-00Eng-0220.indd 35 2008-02-20 �� 11:32:06

English - 36

Using the Setup Menu

Setup displays the user settings of the WISELINK menu.

1. Complete Steps 1 to 3 of “Using the WISELINK Menu”.

(Refer to page 31)

2. Press the ◄ or ► button to move to “Setup”, then press the ENTER button.

3. Press the ▲ or ▼ button to select an item you want, then press the ENTER button. (“Slide Show

Speed”, “Background Music”, “Background Music Setting”, “Repeat Music”, “Screen Saver”)

4. Press the ▲ or ▼ button to select the option, then press the ENTER button.

To exit WISELINK mode, press the W.LINK button on the remote control.

Slide Show Speed:

Select to control the slide show speed. You can select “Fast”,

“Normal” or “Slow”.

Background Music :

Select to determine whether to play an MP3 file during a slide show.

You can select Music “On” or Music “Off”.

Background Music Setting:

While a slide show is in progress, use the "Background Music

Setup" to select a music file to listen to. Select an MP3 file as the

background music.

Repeat Music :

Select to determine whether to repeat playing the music when all

MP3 files in the current folder have been played.

Screen Saver:

Select to set the waiting time before the screen saver appears.

The screensaver will appear when no button is pressed for 1, 5 or

10 minutes.

Slide Show Speed Normal

Background Music On ►

Background Music Setting

Repeat Music Off ►

Screen Saver 1min. ►

Move Enter Return

Setup

Fast

Normal

Slow

Upper Folder

01-001

02-002

03-003

04-004

05-005

Select

Move Enter Return

◄◄ 1/1 Page ►►

Background Music Setting

Choose file for background music

Slide Show Speed Normal ►

Background Music On ►

Background Music Setting

Repeat Music Off

Screen Saver 1min. ►

Move Enter Return

Setup

Off

On

Slide Show Speed Normal ►

Background Music On ►

Background Music Setting

Repeat Music Off ►

Screen Saver 1min.

Move Enter Return

Setup

1min.

5min.

10min.

Slide Show Speed Normal ►

Background Music On

Background Music Setting

Repeat Music Off ►

Screen Saver 1min. ►

Move Enter Return

Setup

Off

On

BN68-01410A-00Eng-0220.indd 36 2008-02-20 �� 11:32:18

English - 37

What is Anynet+?

Anynet+ is an AV network system that enables an easy-to-use AV interface for users by controlling

all connected AV devices through the Anynet+ menu when Samsung Electronics AV devices are

connected.

Connecting Anynet+ Devices

The Anynet+ system supports AV devices supporting Anynet+ only.

Check if there is an Anynet+ mark on the AV device to be connected to the TV.

To directly connect to TV

Connect the [HDMI 1],

[HDMI 2] or [HDMI 3] jack on

the TV and the HDMI OUT jack

of the corresponding Anynet+

device using the HDMI cable.

To connect to Home Theater

1. Connect the [HDMI 1],

[HDMI 2] or [HDMI 3]

jack on the TV and the

HDMI OUT jack of the

corresponding Anynet+

device using the HDMI

cable.

2. Connect the HDMI IN jack

of the home theatre and

the HDMI OUT jack of the

corresponding Anynet+

device using the HDMI

cable.

Connect only one receiver.

You can connect an Anynet+ device using the HDMI 1.3 cable. Some HDMI cables may not support

Anynet+ functions.

Anynet+ works when the AV device supporting Anynet+ is in the Standby or On status.

Anynet+ supports up to 8 AV devices in total.

➣

SER

S

E

R

TV

Anynet+ Device 1 Anynet+ Device 2

Anynet+ Device 3

HDMI 1.3 Cable

Home Theatre

Anynet+ Device 1 Anynet+ Device 2 Anynet+ Device 3

SER

S

E

R

TV

HDMI 1.3 Cable

BN68-01410A-00Eng-0220.indd 37 2008-02-20 �� 11:32:19

English - 38

Setting Up Anynet+

The following settings are to use Anynet+ functions.

Using the Anynet+ Function

1. Press The TOOLS button. Then Press the ENTER button to

select "Anynet+(HDMI-CEC)".

Press the ▲ or ▼ button to select "Setup", then press the

ENTER button.

2. Press the ENTER button to select "Anynet+ (HDMI-CEC)",

then press the ENTER button.

3. Press the ▲ or ▼ button to select "On", then press the

ENTER button.

The "Anynet+ (HDMI-CEC)" function is enabled.

If you select "Off", "Anynet+ (HDMI-CEC)" is disabled.

When the "Anynet+ (HDMI-CEC)" function is disabled, all the

Anynet+ related operations are deactivated.

Turning an Anynet+ Device Off Automatically when the TV is Turned Off

1. Press the ▲ or ▼ button to select "Auto Turn Off", then press

the ENTER button.

2. Press the ▲ or ▼ button to select "Yes", then press the

ENTER button.

The Auto turn off function is enabled.

If you select "No", the Auto turn off function is cancelled.

Press the EXIT button to exit.

The Select Device setting of the TV remote control is to be set

to TV to use the Anynet+ function.

If you set "Auto Turn Off" to "No", connected external devices are also turned off when the TV is

turned off. However, if the device is recording, it may not be turned off.

➣

Setup

Anynet+ (HDMI-CEC)

: Off

Auto Turn Off

: Off

Searching Connections

Off

On

Move Enter Return

Setup

Anynet+ (HDMI-CEC)

: On

Auto Turn Off

: Off

Searching Connections

No

Yes

Move Enter Return

View TV

Select Device 

Record 

Menu on Device 

Device Operation 

Receiver :Off 

Setup 

TV P9

Move Enter

Return

Tools

Anynet+ (HDMI-CEC)

Picture Mode : Standard

Sound Mode : Custom

Sleep Timer : Off

SRS TS XT : Off

Energy Saving : Off

Dual l-ll : Mono

Move Enter Exit

BN68-01410A-00Eng-0220.indd 38 2008-02-20 �� 11:32:20

La page charge ...

Samsung LN46A550P3R Manuel utilisateur

Samsung LN46A550P3R Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents