Lenovo 41N8378 Manuel utilisateur

Taper
Manuel utilisateur

Ce manuel convient également à

Lenovo USB 2.0 Portable
80GB/120GB Hard Drive
Users Guide
Note: Before using this information and the product it supports, read the information
in Appendix A, “Service and Support,” on page A-1 and Appendix B, “Lenovo Limited
Warranty,” on page B-1.
First Edition (March 2007)
© Copyright Lenovo 2007.
Portions © Copyright International Business Machines Corporation 2005.
All rights reserved.
U.S. GOVERNMENT USERS RESTRICTED RIGHTS: Our products and/or services are
provided with RESTRICTED RIGHTS. Use, duplication or disclosure by the Government
is subject to the GSA ADP Schedule contract with Lenovo Group Limited, if any, or the
standard terms of this commercial license, or if the agency is unable to accept this
Program under these terms, then we provide this Program under the provisions set forth
in Commercial Computer Software–Restricted Rights at FAR 52.227-19, when applicable,
or under Rights in Data-General, FAR 52.227.14 (Alternate III).
Contents
Preface ........................v
Hardware Users Guide
.................1-1
Product description
...................1-1
Hardware and software requirements
.............1-1
Before you begin the installation
...............1-1
Installing the drive. . . . . . . . . . . . . . . . . . . . 1-3
Disconnecting the drive from your computer
...........1-4
Detaching the system from a docking station or media bay
.....1-4
Maintaining the drive. . . . . . . . . . . . . . . . . . . 1-4
Appendix A. Service and Support . . . . . . . . . . . . . . A-1
Registering your option
..................A-1
Online technical support
.................A-1
Telephone technical support
................A-1
Appendix B. Lenovo Limited Warranty
............B-1
Warranty information. . . . . . . . . . . . . . . . . . . B-5
Guarantee supplement for Mexico
..............B-7
Lenovo Limited Warranty - Customer Notice . . . . . . . . . . . B-8
Appendix C. Notices
..................C-1
Recycling information
..................C-3
Trademarks
......................C-3
Electronic emission notices
.................C-4
Federal Communications Commission (FCC) Declaration of Conformity C-4
Important information for product recycling and the European
Directive 2002/96/EC. . . . . . . . . . . . . . . . . C-8
© Lenovo 2007. Portions © IBM Corp. 2005. iii
iv Lenovo USB 2.0 Portable 80GB/120GB Hard Drive User ’s Guide
Preface
This manual provides information on the Lenovo 2.0 Portable 80GB/120GB
Hard Drive. This manual is written for the installer and user of this equipment
and contains the following information:
v
“Hardware User’s Guide” contains instructions for installing and using the
80GB/120GB Hard Disk Drive.
v
Appendix A, “Service and Support,” on page A-1 provides service and
support information.
v
Appendix B, “Lenovo Limited Warranty,” on page B-1 provides warranty
information.
v
Appendix C, “Notices,” on page C-1 contains trademarks and legal notices.
© Lenovo 2007. Portions © IBM Corp. 2005. v
vi Lenovo USB 2.0 Portable 80GB/120GB Hard Drive User ’s Guide
Hardware Users Guide
This chapter contains instructions for installing and using the Lenovo USB 2.0
Portable 80GB/120GB Hard Drive.
Note:
Before you install and use the Lenovo USB 2.0 Portable 80GB/120GB
Hard Drive, be sure to read “Before you begin the installatio
n.”
Product description
The Lenovo USB 2.0 Portable 80GB/120GB Hard Drive is a portable,
lightweight, high-speed USB hard disk drive that is compatible with the USB
2.0 standard which enables data transfers that are up to 80 times faster than
through USB 1.1 connections. The drive can be used with mobile or desktop
computers and is also compatible with USB 1.0 and USB 1.1 connections. After
you install the drive, it operates as a plug-and-play device and is
hot-swappable; that is, you can connect and disconnect the drive while the
computer is running. See “Disconnecting the drive from your computer” on
page 1-4.
The option package includes:
v
Lenovo USB 2.0 Portable 80GB/120GB Hard Drive
v
Primary USB cable (USB A to mini B connection)
v
Auxiliary power cable
v
Users Guide
v
Carrying case
Hardware and software requirements
You must have the following hardware installed on your computer:
v
Minimum 200MHz Intel
Pentium
®
microprocessor
v
64 MB Random Access Memory (RAM)
v
USB 1.1 or 2.0 ports
Your
computer must have Microsoft
®
Windows
®
Vista
, Microsoft Windows
XP or Microsoft Windows 2000 Professional installed to use the Lenovo USB
2.0 Portable 80GB/120GB Hard Drive.
Before you begin the installation
Be sure to review the following information before installing and using the
Lenovo USB 2.0 Portable 80GB/120GB Hard Drive.
© Lenovo 2007. Portions © IBM Corp. 2005. 1-1
Attention
Only use the cables that come with this option. You might damage the
drive if you use a cable not included with the option package. Do not
attach an AC adapter to this device.
v To avoid damaging your USB Hard Drive, handle with care. When
transporting the drive or when it is not in use, place it in the carrying case
that comes with the option. For more information on correctly handling your
USB Hard Drive, see “Maintaining the drive” on page 1-4.
v
The primary USB cable must be connected to a USB high power port. If you
experience problems, try connecting the primary USB cable to another USB
port.
v
When using your USB Hard Drive on a mobile computer with a USB 2.0
PCMCIA card, the primary USB cable must be inserted into the PCMCIA
card high power port. You must also connect the auxiliary power cable to
the USB port to provide adequate power.
Attention
Lenovo does not support this product with a third party disk-utility that
reorders or sorts the partition table.
1-2 Lenovo USB 2.0 Portable 80GB/120GB Hard Drive User ’s Guide
Installing the drive
This section provides instructions for installing the drive.
To install the drive, complete the following procedure:
1.
Attach the primary USB cable to the USB port 4.
1 Drive activity LED
2 Auxiliary power port
3 Power LED
4 USB port
5 Primary USB cable
6 Auxiliary power cable
2. Connect the other end of the primary USB cable 5 to an available USB
port on your computer.
3.
Attach the auxiliary power cable to the auxiliary power port 2 on the
drive.
4.
Attach the other end of the auxiliary power cable 6 to an available USB
port on your computer.
Hardware User ’s Guide 1-3
Only use the cables that come with this option. You might damage the
drive if you use a cable not included with the option package. Do not
attach an ac adapter to this device.
5.
Open My Computer and double-click the icon that is associated with the
USB Hard Drive.
Your drive is ready to use and no additional software install is required. To
disable the autolaunch, click Do not show this again in the lower-left hand
corner of the browser window, disconnect the drive, and then reconnect the
drive.
Disconnecting the drive from your computer
To disconnect the drive, complete the following procedure.
1.
Click the Safely Remove Hardware icon in the system tray.
2.
Click the USB Mass Storage Device icon to stop the device.
3.
Disconnect the cables.
Detaching the system from a docking station or media bay
When the USB HDD is attached to the USB ports on a docking station or
Method 1
Use the Undock Computer function from the Start Menu in Windows.
Method 2
On a ThinkPad computer, hit Fn + F9 to access the Easy Eject Action menu,
then Eject ThinkPad PC from Dock. It is recommended to wait at least two
minutes following writing data to the USB HDD before starting the eject
process. If the ejection process fails to complete with a message stating that the
system is unable to stop the device, then click the Safely Remove Hardware
icon in the system tray prior to using Fn + F9 again.
Maintaining the drive
Use the following maintenance guidelines for your drive.
v
Do not drop or shock the drive.
v
Do not operate or store the drive near strong magnetic fields.
v
Do not expose the drive to liquids, extreme temperatures, or humidity.
v
Do not use any power cables or adapters that are not included in this option
package.
1-4 Lenovo USB 2.0 Portable 80GB/120GB Hard Drive User ’s Guide
Description du produit
L’unité de disque dur portable Lenovo 80 Go/120 Go USB 2.0 est une unité de
disque dur USB à grande vitesse, légère et portable, compatible avec la norme
USB 2.0 qui permet des transferts de données jusqu’à 80 fois plus rapides
qu’avec les connexions USB 1.1. Cette unité peut être utilisée aussi bien avec
les portables qu’avec les ordinateurs de bureau, et elle est également
compatible avec les connexions USB 1.0 et USB 1.1. Une fois que vous avez
installé l’unité, elle fonctionne comme un périphérique prêt à l’emploi et elle
est remplaçable à chaud, ce qui signifie que vous pouvez la connecter et la
déconnecter pendant que l’ordinateur est en cours de fonctionnement. Voir
«Déconnexion de l’unité de l’ordinateur», à la page 1-8.
Le coffret de l’option contient les éléments suivants :
v
Unité de disque dur portable Lenovo 80 Go/120 GO USB 2.0
v
Câble USB principal (pour la connexion entre USB A et mini B)
v
Cordon d’alimentation auxiliaire
v
Le présent Guide d’utilisation
v
Housse de transport
Configuration matérielle et logicielle requise
Votre ordinateur doit présenter la configuration matérielle suivante :
v
Microprocesseur Intel Pentium 200 Mhz au minimum
v
64 Mo de mémoire RAM
v
Ports USB 1.1 ou 2.0
Votre
ordinateur doit être doté de Microsoft Windows Vista
, Microsoft
Windows XP ou Microsoft Windows 2000 Professionnel pour utiliser cette unité
de disque dur.
© Lenovo 2007. Portions © IBM Corp. 2005. 1-5
Guide d’utilisation du matériel
Le présent chapitre contient les instructions d’installation et d’utilisation de
l’unité de disque dur portable Lenovo 80 Go/120 Go USB 2.0.
Remarque :
Avant d’installer et d’utiliser cette unité de disque dur, veuillez
prendre connaissance des informations contenues dans la section
«Avant de démarrer l’installation», à la page 1-6.
Avant de démarrer l’installation
Veuillez lire attentivement les informations suivantes avant d’installer et
d’utiliser l’unité de disque dur portable Lenovo 80 Go/120 Go Go USB 2.0.
Attention
Utilisez exclusivement les câbles fournis avec cette option. Vous risquez
d’endommager l’unité si vous utilisez un câble qui n’est pas inclus dans
le coffret de l’option. Ne connectez pas d’adaptateur en courant alternatif
à ce périphérique.
v Pour éviter d’endommager votre unité de disque dur USB, manipulez-la
avec précaution. Lorsque vous transportez l’unité ou lorsque vous ne
l’utilisez pas, placez-la dans la housse de transport fournie avec l’option.
Pour plus d’informations sur la manipulation correcte de l’unité de disque
dur USB, voir «Maintenance de l’unité», à la page 1-9.
v
Le câble USB principal doit être connecté à un port USB de grande
puissance. Si vous rencontrez des difficultés, essayez de connecter le câble
USB principal à un autre port USB.
v
Lorsque vous utilisez votre unité de disque dur USB dans un ordinateur
portable doté d’une carte PCMCIA USB 2.0, le câble USB principal doit être
inséré dans le port de grande puissance de la carte PCMCIA. Vous devez
également connecter le cordon d’alimentation auxiliaire au port USB afin de
fournir l’alimentation requise.
Attention
Lenovo n’offre aucun support pour ce produit s’il est utilisé avec un
utilitaire tiers qui réorganise ou trie la table de partitions.
1-6 Lenovo USB 2.0 Portable 80GB/120GB Hard Drive User ’s Guide
Installation de l’unité
Cette section fournit les instructions d’installation de l’unité.
Pour installer l’unité, procédez comme suit :
1.
Connectez le câble USB principal au port USB 4.
1 Voyant d’activité de l’unité
2 Prise d’alimentation auxiliaire
3 Voyant d’alimentation
4 Port USB
5 Câble USB principal
6 Cordon d’alimentation auxiliaire
2. Branchez l’autre extrémité du câble USB principal 5 sur un port USB
disponible de votre ordinateur.
3.
Branchez le cordon d’alimentation auxiliaire sur la prise d’alimentation
auxiliaire 2 de l’unité.
Guide d’utilisation du matériel 1-7
4. Branchez l’autre extrémité du cordon d’alimentation auxiliaire 6 sur un
port USB disponible de votre ordinateur.
Utilisez exclusivement les câbles fournis avec cette option. Vous risquez
d’endommager l’unité si vous utilisez un câble qui n’est pas inclus dans le
coffret de l’option. Ne connectez pas d’adaptateur en courant alternatif à ce
périphérique.
5.
Ouvrez l’icône Poste de travail et cliquez deux fois sur l’icône associée au
disque dur USB.
Votre unité est prête à être utilisée et aucun autre logiciel ne doit être installé.
Pour désactiver la fonction de lancement automatique, cliquez sur Ne plus
afficher dans l’angle inférieur gauche de la fenêtre du navigateur, déconnectez,
puis reconnectez l’unité.
Déconnexion de l’unité de l’ordinateur
Pour déconnecter l’unité, procédez comme suit.
1.
Cliquez sur l’icône Supprimer le périphérique en toute sécurité de la barre
d’état système.
2.
Cliquez sur l’icône Périphérique de stockage de masse USB pour arrêter
l’unité.
3.
Déconnectez les câbles.
Déconnexion du système d’une station d’accueil ou d’une
baie d’unité de stockage
Lorsque l’unité de disque dur USB est connectée aux ports USB sur une station
d’accueil ou une baie d’unité de stockage, vous devez effectuer certaines
opérations pour exécuter un retrait complet de la station d’accueil et éviter
toute perte de données. Veuillez choisir l’une des méthodes suivantes :
Méthode 1
Utilisez la fonction Retirer l’ordinateur du menu Démarrer de Windows.
Méthode 2
Sur un ordinateur ThinkPad, appuyez sur Fn + F9 pour accéder au menu Easy
Eject Action, puis sélectionnez Déconnecter le PC ThinkPad de la station
d’accueil. Il est recommandé de patienter pendant au moins deux minutes
après l’écriture des données sur l’unité de disque dur USB avant de lancer le
processus d’éjection. Si le processus d’éjection échoue et qu’un message
indique que le système ne peut pas arrêter le périphérique, cliquez sur l’icône
Retrait du matériel en toute sécurité dans la barre d’état système avant
d’utiliser à nouveau les touches Fn + F9.
1-8 Lenovo USB 2.0 Portable 80GB/120GB Hard Drive User ’s Guide
Maintenance de l’unité
Respectez les règles de maintenance de l’unité suivantes :
v
Ne laissez pas tomber l’unité et ne la secouez pas.
v
N’utilisez pas et ne rangez pas l’unité à proximité de forts champs
magnétiques.
v
N’exposez pas l’unité à des liquides, à des températures extrêmes, ni à
l’humidité.
v
N’utilisez pas de cordons d’alimentation ou d’adaptateurs non inclus dans le
coffret de l’option.
Guide d’utilisation du matériel 1-9
Guida per l’utente hardware
Questo capitolo contiene le informazioni per l’installazione e l’utilizzo
dell’unità disco fisso portatile USB 2.0 80GB/120GB della Lenovo.
Nota:
Prima di installare e utilizzare l’unità disco fisso portatile USB 2.0
80GB/120GB della Lenovo, leggere le informazioni contenute nella
sezione “Prima di iniziare l’installazion
e.”
Descrizione del prodotto
L’unità disco fisso portatile USB 2.0 80GB/120GB della Lenovo è un’unità
disco fisso portatile, leggera e USB ad alta velocità compatibile con lo standard
USB 2.0 che permette trasferimenti di dati fino a 80 volte più veloci delle
connessioni USB 1.1. L’unità può essere utilizzata con elaboratori portatili o
desktop ed è anche compatibile con le connessioni USB 1.0 e USB 1.1. Una
volta installata l’unità, essa funziona come un’unità plug and play e non è
sostituibile a sistema acceso; ossia, è possibile collegare e scollegare l’unità
durante l’esecuzione dell’elaboratore. Consultare la sezione “Scollegamento
dell’unità dall’elaboratore” a pagina 1-13.
Il pacchetto di opzioni include:
v
Unità disco fisso portatile USB 2.0 80GB/120GB della Lenovo
v
Cavo USB primario (Connessione USB A a mini B)
v
Cavo di alimentazione ausiliario
v
Guida per l’utente
v
Custodia per il trasporto
Requisiti hardware e software
E’ necessario disporre dei seguenti componenti hardware installati
sull’elaboratore:
v
Minimo Microprocessore Intel Pentium da 200 MHz
v
64 MB di RAM (Random Access Memory)
v
Porte USB 1.1 o 2.0
Il
computer deve disporre di Microsoft Windows Vista
, Microsoft Windows
XP or Microsoft Windows 2000 Professional installper utilizzare l’unità disco
fisso portatile USB 2.0 80GB/120GB della Lenovo.
Prima di iniziare l’installazione
Assicurarsi di rivedere le seguenti informazioni prima di installare e utilizzare
l’unità disco fisso portatile USB 2.0 Portable 80GB/120GB della Lenovo.
1-10 © Lenovo 2007. Portions © IBM Corp. 2005.
Attenzione
Utilizzare solo i cavi forniti con questa opzione. L’utilizzo di cavi diversi
da quelli forniti in questo pacchetto di opzioni, potrebbe danneggiare
l’unità. Non collegare un adattatore CA a questa unità.
v Per evitare di danneggiare l’unità disco fisso USB, gestire con cautela.
Durante il trasporto dell’unità oppure quando non è in uso, posizionarla
nella custodia per il trasporto, fornita con l’opzione. Per ulteriori
informazioni sulla corretta gestione dell’unità disco fisso USB, consultare la
sezione “Manutenzione dell’unità” a pagina
1-14.
v E’ necessario che il cavo USB primario sia collegato ad una porta di elevata
alimentazione USB. Tentare di collegare il cavo USB primario ad un’altra
porta USB.
v
Durante l’utilizzo dell’unità disco fisso USB di un elaboratore portatile con
una scheda PCMCIA USB 2.0, è necessario che il cavo USB primario sia
inserito in una porta ad elevata alimentazione per scheda PCMCIA. E’ anche
necessario collegare il cavo di alimentazione ausiliario alla porta USB, per
fornire un’adeguata alimentazione.
Attenzione
Lenovo non supporta questo prodotto con un programma di terze parti
che ordina o riordina la tabella delle partizioni.
Unità disco fisso portatile USB 2.0 80GB/120GB della Lenovo Guida per l’utente 1-11
Installazione dell’unità
Questa sezione fornisce istruzioni per l’installazione dell’unità.
Per installare l’unità, completare la seguente procedura:
1 LED attività dell’unità
2 Porta di alimentazione ausiliaria
3 LED di stato
4 Porta USB
5 Cavo USB primario
6 Cavo di alimentazione ausiliario
2. Collegare l’altra estremità del cavo USB 5 ad una porta USB disponibile
sul computer.
3.
Collegare il cavo di alimentazione ausiliario alla porta di alimentazione
ausiliaria 2 dell’unità.
4.
Collegare l’altra estremità del cavo di alimentazione ausiliario 6 ad una
porta USB disponibile sul computer.
1-12 Guida per l’utente hardware
Utilizzare solo i cavi forniti con questa opzione. L’utilizzo di cavi diversi da
quelli forniti in questo pacchetto di opzioni, potrebbe danneggiare l’unità.
Non collegare un adattatore CA a questa unità.
5.
Aprire Risorse del computer e fare doppio clic sull’icona associata con
l’unità disco fisso USB.
L’unità è pronta per l’uso e non viene richiesta alcuna installazione aggiuntiva
del software. Per disabilitare l’avvio automatico, fare clic su Non visualizzare
di nuovo nell’angolo sinistro inferiore della finestra del browser, scollegare
l’unità e ricollegarla.
Scollegamento dell’unità dall’elaboratore
Per scollegare l’unità, completare la seguente procedura.
1.
Fare clic su sull’icona Safely Remove Hardware nella barra delle
applicazioni.
2.
Fare clic sull’icona Periferica archiviazione di massa USB per interrompere
l’unità.
3.
Scollegare i cavi.
Staccare il sistema da una docking station o vano di
supporto
Quando l’HDD USB è collegato alle porte USB su un alloggiamento di
espansione o su un vano di supporto, è necessario intraprendere alcune azioni
per una completa rimozione e prevenzione di possibile perdita di dati. Si prega
di completare uno dei seguenti metodi:
Metodo 1
Usare la funzione Rimuovi computer dal menu Start in Windows.
Metodo 2
Su un computer ThinkPad, premere Fn + F9 per accedere al menu azioni Easy
Eject, quindi Espelli il PC ThinkPad dall’alloggiamento di espansione.Si
raccomanda di attendere almeno due minuti in seguito alla scrittura dei dati
all’HDD USB prima di iniziare il processo di rimozione. Se il processo di
rimozione dovesse completarsi in modo non corretto con un messaggio
indicante che il sistema non è in grado di arrestare la periferica fare clic
sull’icona Rimozione sicura dell’hardware sulla barra delle applicazioni prima
di utilizzare di nuovo Fn + F9.
Unità disco fisso portatile USB 2.0 80GB/120GB della Lenovo Guida per l’utente 1-13
Manutenzione dell’unità
Utilizzare le seguenti istruzioni sulla manutenzione dell’unità.
v
Non lasciare cadere o urtare l’unità.
v
Non operare o conservare l’unità presso forti campi magnetici.
v
Non esporre l’unità a liquidi, temperature estreme o umidità.
v
Non utilizzare i cavi di alimentazione o adattatori che non sono compresi in
questo pacchetto di opzione.
1-14 Guida per l’utente hardware
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104

Lenovo 41N8378 Manuel utilisateur

Taper
Manuel utilisateur
Ce manuel convient également à