VTech CS6124-21 Manuel utilisateur

User’s manual

BC

CS6120-2

CS6120-31

CS6124

CS6124-2

CS6124-31

DECT 6.0 cordless telephone

Go to www.vtechphones.com

to register your product for

enhanced warranty support and

latest VTech product news.

Congratulations

on purchasing your new VTech product.

Before using this telephone, please read

Important safety instructions.

This manual has all the feature

operations and troubleshooting

necessary to install and operate your

new VTech telephone. Please review

this manual thoroughly to ensure

proper installation and operation of

this innovative and feature rich VTech

product.

For support, shopping, and everything

new at VTech, visit our website at

www.vtechphones.com. In Canada,

please visit www.vtechcanada.com.

T

Compatible with

Hearing Aid T-Coil

TIA-1083

The ENERGY STAR

®

program

(www.energystar.gov)

recognizes and encourages

the use of products that save

energy and help protect our

environment. We are proud

to mark this product with

the ENERGY STAR

®

label

indicating it meets the latest

energy efficiency guidelines.

Telephones identified with

this logo have reduced

noise and interference

when used with most T-coil

equipped hearing aids

and cochlear implants.

The TIA-1083 Compliant

Logo is a trademark of the

Telecommunications Industry

Association. Used under

license.

Important safety

instructions

When using your telephone equipment,

basic safety precautions should always

be followed to reduce the risk of fire,

electric shock and injury, including the

following:

1. Read and understand all instructions.

2. Follow all warnings and instructions

marked on the product.

3. Unplug this product from the wall

outlet before cleaning. Do not use

liquid or aerosol cleaners. Use a

damp cloth for cleaning.

4. Do not use this product near water

such as near a bath tub, wash

bowl, kitchen sink, laundry tub or a

swimming pool, or in a wet basement

or shower.

5. Do not place this product on an

unstable table, shelf, stand or other

unstable surfaces.

6. Slots and openings in the back or

bottom of the telephone base and

handset are provided for ventilation.

To protect them from overheating,

these openings must not be blocked

by placing the product on a soft

surface such as a bed, sofa or rug.

This product should never be placed

near or over a radiator or heat

register. This product should not be

placed in any area where proper

ventilation is not provided.

7. This product should be operated

only from the type of power source

indicated on the marking label. If you

are not sure of the type of power

supply in your home or office, consult

your dealer or local power company.

8. Do not allow anything to rest on

the power cord. Do not install this

product where the cord may be

walked on.

9. Never push objects of any kind into

this product through the slots in the

telephone base or handset because

they may touch dangerous voltage

points or create a short circuit. Never

spill liquid of any kind on the product.

10. To reduce the risk of electric shock,

do not disassemble this product,

but take it to an authorized service

facility. Opening or removing parts of

the telephone base or handset other

than specified access doors may

expose you to dangerous voltages or

other risks. Incorrect reassembling

can cause electric shock when the

product is subsequently used.

11. Do not overload wall outlets and

extension cords.

12. Unplug this product from the wall

outlet and refer servicing to an

authorized service facility under the

following conditions:

! When the power supply cord or

plug is damaged or frayed.

! If liquid has been spilled onto the

product.

! If the product has been exposed to

rain or water.

! If the product does not operate

normally by following the operating

instructions. Adjust only those

controls that are covered by the

operation instructions. Improper

adjustment of other controls

may result in damage and often

requires extensive work by an

authorized technician to restore

the product to normal operation.

! If the product has been dropped

and the telephone base and/or

handset has been damaged.

! If the product exhibits a distinct

change in performance.

13. Avoid using a telephone (other than

cordless) during an electrical storm.

There is a remote risk of electric

shock from lightning.

14. Do not use the telephone to report

a gas leak in the vicinity of the leak.

Under certain circumstances, a spark

may be created when the adapter

is plugged into the power outlet,

or when the handset is replaced in

its cradle. This is a common event

associated with the closing of any

electrical circuit. The user should

not plug the phone into a power

outlet, and should not put a charged

handset into the cradle, if the

phone is located in an environment

containing concentrations of

flammable or flame-supporting

gases, unless there is adequate

ventilation. A spark in such an

environment could create a fire

or explosion. Such environments

might include: medical use of

oxygen without adequate ventilation;

industrial gases (cleaning solvents;

gasoline vapors; etc.); a leak of

natural gas; etc.

15. Only put the handset of your

telephone next to your ear when it is

in normal talk mode.

16. The power adapter is intended to be

correctly oriented in a vertical or floor

mount position. The prongs are not

designed to hold the plug in place if

it is plugged into a ceiling, under-the-

table or cabinet outlet.

SAVE THESE INSTRUCTIONS

Battery

! CAUTION: Use Only Supplied Battery.

! Do not dispose of the battery in a fire.

Check with local waste management

codes for special disposal instructions.

! Do not open or mutilate the battery.

Released electrolyte is corrosive and

may cause burns or injury to the eyes

or skin. The electrolyte may be toxic if

swallowed.

! Exercise care in handling batteries in

order not to create a short circuit with

conductive materials.

! Charge the battery provided with this

product only in accordance with the

instructions and limitations specified in

this manual.

Precautions for users of implanted

cardiac pacemakers

Cardiac pacemakers (applies only to

digital cordless telephones):

Wireless Technology Research, LLC

(WTR), an independent research entity,

led a multidisciplinary evaluation of the

interference between portable wireless

telephones and implanted cardiac

pacemakers. Supported by the U.S.

Food and Drug Administration, WTR

recommends to physicians that:

Pacemaker patients

! Should keep wireless telephones at

least six inches from the pacemaker.

! Should NOT place wireless telephones

directly over the pacemaker, such as

in a breast pocket, when it is turned

ON.

! Should use the wireless telephone at

the ear opposite the pacemaker.

WTRs evaluation did not identify any

risk to bystanders with pacemakers from

other persons using wireless telephones.

About cordless telephones

! Privacy: The same features that

make a cordless telephone convenient

create some limitations. Telephone

calls are transmitted between the

telephone base and the cordless

handset by radio waves, so there is a

possibility that the cordless telephone

conversations could be intercepted

by radio receiving equipment within

range of the cordless handset. For

this reason, you should not think of

cordless telephone conversations as

being as private as those on corded

telephones.

! Electrical power: The telephone

base of this cordless telephone must

be connected to a working electrical

outlet. The electrical outlet should not

be controlled by a wall switch. Calls

cannot be made from the cordless

handset if the telephone base is

unplugged, switched off or if the

electrical power is interrupted.

! Potential TV interference: Some

cordless telephones operate

at frequencies that may cause

interference to televisions and

VCRs. To minimize or prevent

such interference, do not place

the telephone base of the cordless

telephone near or on top of a TV or

VCR. If interference is experienced,

moving the cordless telephone farther

away from the TV or VCR often

reduces or eliminates the interference.

! Rechargeable batteries: Exercise

care in handling batteries in order

not to create a short circuit with

conducting material such as rings,

bracelets and keys. The battery or

conductor may overheat and cause

harm. Observe proper polarity

between the battery and the battery

charger.

! Nickel-metal hydride rechargeable

batteries: Dispose of these batteries

in a safe manner. Do not burn or

puncture the battery. Like other

batteries of this type, if burned or

punctured, they could release caustic

material which could cause injury.

i

Table of contents

What’s in the box .......................................1

Overview.....................................................2

Telephone base overview ........................... 2

Handset overview ........................................ 2

Charger overview ........................................ 3

Display icons overview ................................ 3

Telephone base lights overview .................. 3

Connect ......................................................4

Connect the telephone base ....................... 4

Connect the charger .................................... 4

Mount the telephone base........................... 4

Install and charge the battery ...................... 4

Before use ..................................................6

Set date and time ........................................ 6

Check for dial tone ...................................... 6

Operating range .......................................... 6

!"#$%&'()!%&(*'+',-!"' .........................7

Use the handset menu ................................ 7

Set language ............................................... 7

Set date and time ........................................ 7

Home area code .......................................... 7

Dial mode .................................................... 8

Temporary tone dialing ................................ 8

Telephone operations ............................... 9

Make a call .................................................. 9

Predial a call ................................................ 9

Answer a call ............................................... 9

End a call: .................................................... 9

Volume ........................................................ 9

Mute ............................................................ 9

Join a call in progress (for multiple

handset models only) ........................... 10

Call waiting ................................................ 10

Chain dialing .............................................. 10

Find handset...............................................11

Redial list..................................................11

Review a redial list entry ............................11

Dial a redial list entry ..................................11

Delete a redial list entry ..............................11

Directory ...................................................12

Add a directory entry ................................. 12

Review a directory entry ............................ 12

Alphabetical search ................................... 13

Delete a directory entry ............................. 13

Edit a directory entry ................................. 13

Dial a directory entry ................................. 13

Caller ID ....................................................14

Review a caller ID log entry ...................... 14

Memory match........................................... 14

Missed call indicator .................................. 14

View dialing options................................... 15

Dial a caller ID log entry ............................ 15

Save a caller ID log entry to

the directory .......................................... 15

Delete the caller ID log entries .................. 16

Sound settings .........................................16

Key tone .................................................... 16

Ringer tone ................................................ 16

Telephone base ringer volume .................. 16

Handset ringer volume .............................. 17

Temporary ringer silencing ........................ 17

About the built-in answering system

and voicemail service ......................... 17

Set your built-in answering system .......18

Turn the answering system on or off ......... 18

Default announcement .............................. 19

Record your own announcement .............. 19

Play the announcement ............................ 19

Delete the announcement ......................... 19

Set number of rings ................................... 20

Set recording time ..................................... 20

Turn the call screening on or off ................ 20

Turn the message alert tone on or off ....... 20

Use your built-in answering system ......21

New message indication ........................... 21

Message playback .................................... 21

Delete all messages .................................. 22

Remote access ......................................... 22

Set your remote access code ................... 23

Call screening............................................ 23

Call intercept ............................................. 23

Record, play or delete memos .................. 24

ii

Use the built-in answering system

and voicemail service ......................... 24

Retrieve voicemail from telephone

service ..................................................25

Retrieve voicemail ..................................... 25

Turn off the new voicemail indicators ........ 25

Register a handset ..................................25

Other information ....................................26

Website ..................................................... 26

Screen messages ....................................26

General product care ..............................28

Frequently asked questions ...................28

The RBRC

®

seal .......................................31

FCC, ACTA and IC regulations ...............32

California Energy Commission

battery charging testing

instructions .........................................34

For C-UL compliance only ......................35

Limited warranty ......................................38

.'/-"0/1+(2,'/0#/1*0!"2 .........................40

1

What’s in the box

Your telephone package contains the

following items. Save your sales receipt

and original packaging in the event

warranty service is necessary.

NOTE

! To purchase a replacement battery or

power adapter, visit our website at

www.vtechphones.com or call

1 (800) 595-9511. In Canada, go to

www.vtechcanada.com or call

1 (800) 267-7377.

1 set for CS6124;

2 sets for CS6120-2/CS6124-2;

3 sets for CS6120-31/CS6124-31

1 set for CS6120-2/CS6120-31/

CS6124/CS6124-2/CS6124-31

1 set for CS6120-2/CS6120-31/

CS6124/CS6124-2/CS6124-31

1 set for CS6120-2/CS6124-2;

2 sets for CS6120-31/CS6124-31

Abridged

user’s

manual

Important

safety

instructions

2

Overview

Telephone base overview

1 –

/REPEAT

! Repeat a message.

! Press twice to play the previous

message.

2 –

/SKIP

! Skip to the next message.

3 –

/FIND HANDSET

! Page all system handsets.

4 – Charging pole

5 – Speakerphone

6 – X/DELETE

! Delete the playing message.

! Press twice to delete all old

messages.

7 – Message window

8 –

/PLAY/STOP

! Play messages.

! Stop playing messages.

9 – /!/VOLUME

! Adjust the listening volume.

! Adjust the telephone base ringer

volume.

10 –

/ANS ON/OFF

! Turn on or off the answering system.

11 – IN USE light

! Flashes when there is an incoming

call, or another telephone sharing the

same line is in use.

! On when the telephone is in use, or

the answering system is answering a

call.

Handset overview

1 – Handset earpiece

2 – LCD display

3 –

CID/VOL-

! Review the caller ID log when the

telephone is not in use.

! Scroll down while in a menu, or in the

directory, caller ID log or redial list.

! Move the cursor to the left when

entering numbers or names.

! Decrease the listening volume during

a call or message playback.

4 –

/FLASH

! Make or answer a call.

! Answer an incoming call when you

receive a call waiting alert.

5 – 1

! Press repeatedly to add or remove 1

in front of the caller ID log entry before

dialing or saving it to the directory.

6 – TONE

! Switch to tone dialing temporarily

during a call.

7 – MUTE/DELETE

! Mute the microphone during a call.

3

! Silence the handset ringer temporarily

while the phone is ringing.

! Delete the displayed entry while

reviewing the directory, caller ID log or

redial list.

! Delete digits or characters when

entering numbers or names.

8 – Microphone

9 – Charging pole

10 – MENU/SELECT

! Show the menu.

! While in a menu, press to select an

item, or save an entry or setting.

11 –

/VOL+

! Review the directory when the phone

is not in use.

! Scroll up while in a menu, or in the

directory, caller ID log or redial list.

! Move the cursor to the right when

entering numbers or names.

! Increase the listening volume during a

call or message playback.

12 – OFF/CANCEL

! Hang up a call.

! Return to the previous menu or idle

mode without making changes.

! Delete digits while predialing.

! Silence the handset ringer temporarily

while the phone is ringing.

! Erase the missed call indicator while

the handset is not in use.

13 – 0/OPER

! Enter space character during text

editing.

14 – #

! Show other dialing options when

reviewing a caller ID log entry.

15 – REDIAL/PAUSE

! Review the redial list.

! Insert a dialing pause while dialing or

entering numbers into the directory.

16 – Battery compartment cover

Charger overview

1 – Charging pole

Display icons overview

The battery icon flashes

when the battery is low and

needs charging.

The battery icon animates

when the battery is charging.

The battery icon becomes

solid when the battery is fully

charged.

There are new messages on

the built-in answering system.

There are new voicemail

received from your telephone

service provider.

NEW

There are new caller ID log

entries.

ANS ON

The answering system is

turned on.

1

The message number

currently playing.

Telephone base lights overview

IN USE

! On when the telephone line

is in use.

! On when the answering

system is answering a call.

! Flashes quickly when there

is an incoming call.

! Flashes when another

telephone sharing the

same line is in use.

/ANS ON/

OFF

On when the answering

system is turned on.

4

Connect

You can choose to connect the

telephone base for desktop usage or wall

mounting.

NOTES

! Use only the adapters provided.

! Make sure the electrical outlets are not

controlled by wall switches.

! The adapters are intended to be correctly

oriented in a vertical or floor mount

position. The prongs are not designed to

hold the plug in place if it is plugged into a

ceiling, under-the-table or cabinet outlet.

TIP

! If you subscribe to digital subscriber line

(DSL) high-speed Internet service through

your telephone line, make sure you install

a 345(#+*'& (not included) between the

telephone line cord and telephone wall

jack. Contact your DSL service provider for

more information.

Connect the telephone base

Connect the charger

Mount the telephone base

Install and charge the battery

Install the battery

Install the battery as shown below.

NOTES

! Use only supplied battery.

! Charge the battery provided with this

product only in accordance with the

instructions and limitations specified in this

manual.

! If the handset will not be used for a long

time, disconnect and remove the battery to

prevent possible leakage.

THIS SIDE UP

5

Charge the battery

Place the handset in the telephone

base or the charger to charge.

Once you have installed the battery,

the handset LCD display indicates the

battery status (see the following table).

NOTES

! For best performance, keep the handset

in the telephone base or charger when not

in use.

! The battery is fully charged after 16 hours

of continuous charging.

! If you place the handset in the telephone

base or the charger without plugging in the

battery, the screen displays No battery.

Battery

indicators

Battery

status

Action

The screen

is blank, or

displays Put

in charger

and

flashes.

The battery

has no or

very little

charge. The

handset

cannot be

used.

Charge

without

interruption

(at least 30

minutes).

The screen

displays

Low battery

and

flashes.

The battery

has enough

charge to

be used for

a short time.

Charge

without

interruption

(about 30

minutes).

The screen

displays

HANDSET X.

The battery

is charged.

To keep

the battery

charged,

place it in the

telephone

base or

charger when

not in use.

When the battery is fully charged, you

can expect the following performance:

Operation

Operating

time

While in use (talking*) Seven hours

While not in use (standby**) Five days

* Operating times vary depending on your

actual use and the age of the battery.

** Handset is not charging nor in use.

6

Before use

After you install your telephone or power

returns following a power outage, the

handset will prompt you to set the date

and time.

Set date and time

NOTE

! Make sure you set the date and time

including the year correctly; otherwise the

answering system does not announce the

correct day of the week for your recorded

messages time stamp.

1. Use the dialing keys (0-9) to enter

the month (MM), date (DD) and year

(YY). Then press SELECT.

2. Use the dialing keys (0-9) to enter

the hour (HH) and minute (MM).

Then press ! or to choose AM or

PM.

3. Press SELECT to save.

Check for dial tone

Press

. If you hear a dial tone, the

installation is successful.

If you do not hear a dial tone:

! Make sure the installation procedures

described above are properly done.

! It may be a wiring problem. If you have

changed your telephone service to

digital service from a cable company

or a VoIP service provider, the

telephone line may need to be rewired

to allow all existing telephone jacks to

work. Contact your cable/VoIP service

provider for more information.

Operating range

This cordless telephone operates with

the maximum power allowed by the

Federal Communications Commission

(FCC). Even so, this handset and

telephone base can communicate over

only a certain distance - which can vary

with the locations of the telephone base

and handset, the weather, and the layout

of your home or office.

When the handset is out of range, the

handset displays Out of range or no

pwr at base.

If there is a call while the handset is out

of range, it may not ring, or if it does ring,

the call may not connect well when you

press

. Move closer to the telephone

base, then press

to answer the call.

If the handset moves out of range during

a telephone conversation, there may be

interference. To improve reception, move

closer to the telephone base.

7

!"#$%&'()!%&(*'+',-!"'

Use the handset menu

1. Press MENU when the phone is not

in use.

2. Press

or until the screen displays

the desired feature menu.

3. Press SELECT.

! To return to the previous menu, press

CANCEL.

! To return to idle mode, press and hold

CANCEL.

Set language

The LCD language is preset to English.

You can select English, French or

Spanish to be used in all screen

displays.

1. Press MENU when the handset is

not in use.

2. Press ! or to choose Settings

and then press SELECT twice.

3. Press ! or to choose English,

Français or Español.

4. Press SELECT twice to save your

setting. You hear a confirmation tone.

Set date and time

NOTE

! Make sure you set the date and time

including the year correctly; otherwise the

answering system does not announce the

correct day of the week for your recorded

messages time stamp.

1. Press MENU on the handset when

not in use.

2. Press ! or to choose Set

date/time and then press SELECT.

3. Use the dialing keys (0-9) to enter

the month (MM), date (DD) and year

(YY). Then press SELECT.

4. Use the dialing keys (0-9) to enter

the hour (HH) and minute (MM).

Then press ! or to choose AM or

PM.

5. Press SELECT to save your setting.

Your hear a confirmation tone.

Home area code

If you dial local calls using only seven

digits (area code not required), you

can program your home area code so

that when you receive a call within your

local area, the telephone number is

automatically stored in the caller ID log

without the area code.

1. Press MENU when the handset is

not in use.

2. Press ! or to choose Settings

and then press SELECT.

3. Press ! or to choose Home area

code, and then press SELECT. The

screen displays the currently stored

home area code.

4. Use the dialing keys (0-9) to enter

the desired home area code.

! Press DELETE to delete a digit.

! Press and hold DELETE to delete

all digits.

5. Press SELECT to confirm. You hear

a confirmation tone.

NOTE

! If, in the future, your telephone service

provider requires you to dial the area code

when making a local call, or, if you move to

a location that requires it, delete the home

area code you have already programmed

following the steps above. After you have

deleted the home area code, ___ appears.

8

Dial mode

The dial mode is preset to touch-tone

dialing. If you have pulse (rotary) service,

you need to change the dial mode to

pulse dialing before using the telephone.

1. Press MENU when the handset is

not in use.

2. Press ! or to choose Settings,

and then press SELECT.

3. Press ! or to choose Dial mode,

then press SELECT.

4. Press

or to choose Touch-tone

or Pulse, then press SELECT to

confirm your selection. You hear a

confirmation tone.

Temporary tone dialing

If you have pulse (rotary) service only,

you can switch from pulse to touch-tone

dialing temporarily during a call. This is

useful if you need to send touch-tone

signals to access your telephone banking

or long distance services.

1. During a call, press TONE

.

2. Use the dialing keys to enter the

number. The telephone sends touch-

tone signals. It automatically returns

to pulse dialing mode after you end

the call.

9

Telephone operations

Make a call

! Press

, and then dial the telephone

number.

NOTES

! The screen shows the elapsed time as you

talk (in hours, minutes and seconds).

! If the handset is moved out of range while

on a call, it will beep three times.

Predial a call

! Enter the telephone number using

the dialing keys (0-9), then press

to dial.

NOTE

! When predialing (preview numbers before

dialing), press DELETE or CANCEL to

backspace and delete; press and hold

PAUSE to insert a dialing pause (a P

appears).

Answer a call

! Press

or any of the dialing keys.

End a call:

! Press OFF or put the handset back in

the telephone base or charger.

Volume

! During a call, press VOL- or VOL+ to

adjust the listening volume.

Mute

The mute function allows you to hear the

other party but the other party cannot

hear you.

1. During a call, press MUTE. The

handset displays Muted.

2. Press MUTE again to resume the

conversation. The handset displays

Microphone on briefly.

Handset control key panel:

CANCEL

10

Join a call in progress (for

multiple handset models only)

You can use three handsets at a time on

an outside call.

! When a handset is already on a call,

press

on another handset to join

the call.

! To exit the call, press OFF on the

handset or place it in the telephone

base or charger. The call continues

until all handsets hang up.

Call waiting

When you subscribe to call waiting

service from your telephone service

provider, you hear an alert tone if there

is an incoming call while you are already

on a call.

! Press FLASH to put the current call on

hold and take the new call.

! Press FLASH at any time to switch

back and forth between calls.

If you also subscribe to caller ID

service, it will let you see the name and

telephone number of the caller during

call waiting.

It may be necessary to change your

telephone service to use this feature.

Contact your telephone service provide if:

! You have both caller ID and call

waiting, but as separate service (you

may need to combine these service);

! You have only caller ID service, or

only call waiting service; or

! You do not subscribe to caller ID or

call waiting services.

There are fees for caller ID services. In

addition, services may not be available in

all areas.

Chain dialing

Use this feature to initiate a dialing

sequence from numbers stored in the

directory, caller ID log or redial while you

are on a call.

Chain dialing can be useful if you wish

to access other numbers (such as bank

account numbers or access codes) from

the directory, caller ID log or redial list.

To access a number in the

directory while on a call:

1. Press MENU/SELECT twice to enter

the directory.

2. Press ! or to scroll to the desired

entry.

3. Press SELECT to dial the displayed

number.

To access a number in the caller

ID log while on a call:

1. Press MENU and then press ! or

to select Caller ID log.

2. Press SELECT and then press ! or

to scroll to the desired entry.

3. Press SELECT to dial the displayed

number.

To access a number in the redial

list while on a call:

1. Press REDIAL.

2. Press !, or REDIAL repeatedly to

browse to the desired entry.

3. Press SELECT to dial the displayed

number.

11

NOTES

! You cannot edit a directory entry while on

a call. Refer to the Directory section for

more details.

! You cannot copy a caller ID log entry into

the directory while on a call. Refer to the

Caller ID log section for more details.

! You cannot erase a redial entry while on

a call. Refer to the Redial list section for

more details.

! Press CANCEL to exit redial, directory or

caller ID log when you are on a call.

Find handset

Use this feature to find the system

handset.

To start paging:

! Press

/FIND HANDSET on the

telephone base when not in use.

All idle handsets ring and display

** Paging **.

To end paging:

! Press

/FIND HANDSET at the

telephone base.

-OR-

! Press

or any of the dialing keys on

the handset.

NOTES

! Press MUTE to turn off the ringer of

a handset temporarily. Paging tone

continues on the other handset.

! Do not press and hold

/FIND HANDSET

for more than four seconds. It may lead

to handset deregistration. If the handset

displays To register HS and See manual,

refer to the Register a handset section to

register the handset back to the telephone

base.

Redial list

Each handset stores the last five

telephone numbers dialed. Entries are

shown in reverse chronological order.

When there are already five entries, the

oldest entry is deleted to make room for

the new entry.

Review a redial list entry

1. Press REDIAL when the handset is

not in use.

2. Press !, or REDIAL repeatedly

until the desired entry displays.

Dial a redial list entry

1. Press REDIAL when the handset is

not in use.

2. Press !, or REDIAL repeatedly

until the desired entry displays.

3. Press

to dial.

-OR-

1. Press

when the handset is not in

use.

2. Press REDIAL and then press !,

or REDIAL repeatedly until the

desired entry displays.

3. Press SELECT to dial.

Delete a redial list entry

1. Press REDIAL when the handset is

not in use.

2. Press !, or REDIAL repeatedly to

browse to the desired entry.

3. Press DELETE to delete the

displayed number. You hear a

confirmation tone.

12

VTech CS6124-21 Manuel utilisateur

Ce manuel convient également à

VTech CS6124-21 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents