Sharp 32C231 Manuel utilisateur

Marque: Sharp

Modèle: 32C231

Catégorie: Téléviseurs CRT

Taper: Manuel utilisateur

Ce manuel convient également à

CRT Television 32C231

Dimension: 140mm x 215mm

COLOR TELEVISION

MODEL

32C231

s an

NERGY

TAR

artner, SHARP has determined that this product meets the

NERGY

TAR

guidelines for energy efficiency.

NERGY

TAR

is a

U.S.

registered

trademark.

CONTENTS

PAG E

• IMPORTANT INFORMATION/IMPORTANT

SAFEGUARDS .................................................... 2–4

• Supplied Accessories ............................................... 5

• Before Operating Your Television .............................. 5

• Antenna Connections ........................................... 5, 6

• Quick Reference Control Operation ......................... 7

• EZ SETUP during First Use ..................................... 8

• Demo Mode .............................................................. 9

• Accessing the MAIN MENU screen without

Remote Control ........................................................ 9

• Language ............................................................... 10

• Sleep Timer ............................................................ 10

• Video Adjust ........................................................... 11

•Audio Select ..................................................... 12, 13

MTS (Multichannel TV Sound) ............................ 12

AUDIO ADJUST ................................................. 13

This operation manual includes basic operating

instructions in Spanish and French.

SPANISH is on page 40–44.

FRENCH is on page 45–49.

PAG E

• Closed Caption ....................................................... 14

•Parent Control .................................................. 15–25

V-CHIP Operation ......................................... 15–22

VIEW TIMER ................................................ 23–25

• Energy Save ........................................................... 26

• Set Up .............................................................. 27–33

EZ Setup ............................................................. 27

Channel Setting ............................................ 28–30

Blue Screen .................................................. 30, 31

•Auto Input ............................................................... 32

• CH/Input ID ....................................................... 33, 34

• Screen Format ........................................................ 35

• Using the Video and Audio Input Terminals ...... 36, 37

• Before Calling for Service ....................................... 38

• Calling for Service .................................................. 38

• Specifications ......................................................... 39

• Limited Warranty .................................................... 50

A708 WJ

L OPERATION MANUAL L

32C231(01-04) 3/27/03, 11:13 AM1

Dimension: 140mm x 215mm

Welcome to the SHARP Family. We are pleased that you are now the owner of a SHARP Color Television

– built for outstanding quality, reliability and performance.

Every SHARP Color Television set is tuned and adjusted for proper color and sound, and has passed

through the most stringent quality control tests at the factory. We have prepared this OPERATION MANUAL

so that you may adjust the picture and color to your personal viewing preference.

We sincerely hope that you receive the greatest satisfaction and enjoyment from your new SHARP Color

Television set for years to come.

Please read these instructions carefully, and keep them handy for your future reference.

Model No.:

Serial No.:

IMPORTANT

To aid reporting in case of loss or theft, please record the TV’s

model and serial numbers in the space provided. The numbers

are located at the rear of the TV.

IMPORTANT INFORMATION

There are two important reasons for prompt warranty registration of your new SHARP television set. Use

the REGISTRATION CARD packed in with the set.

FIRST – WARRANTY

This is to assure that you will immediately receive the full consumer benefit of the parts, service and labor

warranty applicable to your purchase.

SECOND – CONSUMER PRODUCT SAFETY ACT

To assure that you will promptly receive any safety notification on inspection, modification or recall that

SHARP may be required to give under the 1972 Consumer Product Safety Act. PLEASE READ

CAREFULLY THE IMPORTANT “LIMITED WARRANTY” CLAUSE ON THE LAST PAGE.

WHAT IS ENERGY STAR

TVs and VCRs use energy both when they are on and when they are off. Americans spend more than $1

billion a year on energy consumed by TVs and VCRs when they are not in use. The new ENERGY

STAR

models will reduce that energy “leakage” by up to 75 percent. Ultimately, this will mean more than

$500 million a year in energy savings for consumers.

The energy savings will help reduce the burning of fossil fuels and the related carbon dioxide pollution

that contributes to global warming. If every American family replaced their TVs and VCRs with ENERGY

STAR

models, it would reduce carbon dioxide emissions by five million tons every year — equivalent to

eliminating the pollution from more than one million cars.

By using ENERGY STAR

products, you will save money on your electric bills and use less energy. That

makes good economic sense and it’s good for our environment.

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT

EXPOSE THIS APPLIANCE TO WET LOCATIONS.

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

The lightning flash with

arrowhead within a triangle is

intended to tell the user that

parts inside the product are a

risk of electric shock to

persons.

The exclamation point within a

triangle is intended to tell the

user that important operating

and servicing instructions are

in the papers with the

appliance.

“Note to CATV system installer: This reminder is provided to call the CATV system installer’s attention

to Article 820-40 of the National Electrical Code that provides guidelines for proper grounding and, in

particular, specifies that the cable ground shall be connected to the grounding system of the building,

as close to the point of cable entry as practical.”

32C231(01-04) 3/27/03, 11:13 AM2

Dimension: 140mm x 215mm

IMPORTANT INFORMATION (Continued)

WARNING – FCC Regulations state that any unauthorized changes or modifications to this equipment not

expressly approved by the manufacturer could void the user’s authority to operate this

equipment.

PRODUCT DISPOSAL

This product utilizes a Cathode Ray Tube (CRT) containing lead and tin-lead solder.

Disposal of these materials may be regulated due to environment considerations. For disposal or

recycling information, please contact your local authorities or the Electronics Industries Alliance:

www.eiae.org

CAUTION: Do not place the AC power cord under the TV set or other heavy items.

CAUTION: Please read all of these instructions before you operate your television and save

these instructions for later use.

Electrical energy can perform many useful functions. This unit has been engineered and manufactured to assure

your personal safety. BUT IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE

HAZARDS. In order not to defeat the safeguards incorporated in this equipment, observe the following basic

rules for its installation, use and servicing.

1. Unplug this television equipment from the wall outlet before cleaning.

2. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

3. Do not use attachments not recommended by the television equipment manufacturer as they may cause

hazards.

4. Do not use this television equipment near water — for example, near a bath tub, washbowl, kitchen sink or

laundry tub, in a wet basement, or near a swimming pool, etc.

5. Do not place this equipment on an unstable cart, stand, or table. The television equipment may fall, causing

serious injury to a child or an adult, and serious damage to the equipment. Use only with a cart or stand

recommended by the manufacturer or sold with the television equipment.

6. Television equipment and cart combination should be moved with care. Quick stops,

excessive force, and uneven surfaces may cause the equipment and cart combination to

overturn.

7. Wall or shelf mounting should follow the manufacturer’s instructions, and should use a

mounting kit approved by the manufacturer.

8. Slots and openings in the cabinet and the back or bottom are provided for ventilation. To

insure reliable operation of the television equipment and to protect it from overheating, these openings must

not be blocked or covered. This television equipment should not be placed in a built-in insulation such as a

bookcase unless proper ventilation is provided.

9. The openings should never be covered with a cloth or other material, and the bottom openings should not

be blocked by placing the television equipment on a bed, sofa, rug, or other similar surface. This television

equipment should never be placed near or over a radiator or heat register.

10. This television equipment should be operated only from the type of power source indicated on the marking

label. If you are not sure of the type of power supplied to your home, consult your television dealer or local

power company.

For television equipment designed to operate from battery power, refer to the operating instructions.

11. As a safety feature, television equipment is equipped with a 2-wire polarized plug (one plug blade bigger

than the other). The 2-wire polarized plug will fit only one way into the power outlet.

If the plug does not fit, ask your electrician to replace your obsolete outlet. Do not modify the plug and defeat

this safety feature.

12. Do not allow anything to rest on the power cord. Do not locate this television equipment where the cord will

be abused by persons walking on it.

IMPORTANT SAFEGUARDS

32C231(01-04) 3/27/03, 11:13 AM3

Dimension: 140mm x 215mm

IMPORTANT SAFEGUARDS (Continued)

13. Follow all warnings and instructions marked on the television equipment.

14. If an outside antenna is connected to the television equipment, be sure the antenna system is grounded

so as to provide some protection against voltage surges and built-up static charges. Section 810 of the

National Electrical Code provides information with respect to proper grounding of the mast and

supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding

conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements

for the grounding electrode.

15. For added protection for this television equipment during a lightning storm, or when it is left unattended and

unused for long periods of time, unplug it from the wall outlet and disconnect the antenna. This will prevent

damage to the equipment due to lightning and power-line surges.

16. An outside antenna system should not be located in the vicinity of overhead power lines or other electric

light or power circuits, or where it can fall into such power lines or circuits. When installing an outside

antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact

with them might be fatal.

17. Do not overload wall outlets and extension cords as this can result in fire or electric shock.

18. Never push objects of any kind into this television equipment through cabinet slots as they may touch

dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid

of any kind on the television equipment.

19. Do not attempt to service this television equipment yourself as opening or removing covers may expose you

to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

20. Unplug this television equipment from the wall outlet and refer servicing to qualified service personnel

under the following conditions:

A. When the power cord or plug is damaged or frayed.

B. If liquid has been spilled into the television equipment.

C. If the television equipment has been exposed to rain or water.

D. If the television equipment does not operate normally by following the operating instructions. Adjust

only those controls that are covered by the operating instructions as improper adjustment of other

controls may result in damage and will often require extensive work by a qualified technician to

restore the television equipment to normal operation.

E. If the television equipment has been dropped or the cabinet has been damaged.

F. When the television equipment exhibits a distinct change in performance — this indicates a need for

service.

21. Upon completion of any service or repairs to this television equipment, ask the service technician to

perform routine safety checks to determine that the television is in safe operating condition.

22. When replacement parts are required, be sure the service technician has used replacement parts

specified by the manufacturer that have the same characteristics as the original part. Unauthorized

substitutions may result in fire, electric shock, or other hazards.

ANTENNA

LEAD IN

WIRE

ANTENNA

DISCHARGE UNIT

(NEC SECTION 810-20)

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(NEC ART 250, PART H)

ELECTRIC

SERVICE

EQUIPMENT

NEC—NATIONAL ELECTRICAL CODE

GROUND

CLAMP

EXAMPLE OF ANTENNA GROUNDING AS PER

NATIONAL ELECTRICAL CODE

32C231(01-04) 3/27/03, 11:13 AM4

Dimension: 140mm x 215mm

Supplied Accessories

Size AA

Dry Batteries

Infrared Remote Control

RRMCG1324CESC

Note:

Location

•For normal operation, your TV should be located in an area of the room where cool adequate ventilation

is provided. Do not place the back of the television set in a place where free airflow will be restricted.

•Any magnetic force may disturb the color picture. Make sure that magnets, electric clocks, toys using

magnets or any other magnetic substance, such as iron are kept well away from the TV set.

Power

Your TV operates on 120 Volts, 60 Hz (normal household current) and has a polarized plug. If you are

unable to insert the plug fully into the outlet, try reversing the plug. Should it fail to fit, contact an

electrician. Do not defeat the safety feature of the polarized plug.

• If the set is not going to be used for a long period, such as during a vacation, unplug the set from the

wall outlet to economize power. (If the TV set is plugged in, a slight current still flows, even with the

POWER BUTTON in the OFF position.)

• Lines and other noise may appear in TV broadcast images when an FM tuner or radio is located near

the TV and both radio and TV broadcasts are being received. Should such noise appear, turn off the

radio.

• If you are listening to an AM broadcast, turn the TV off. AM broadcast signals may not be received

due to interference from the TV.

•

Before using the television, prepare the Remote Control

To use the remote control, insert batteries first.

Inserting the batteries

• With your thumbnail, pull up the slit as indicated by the arrow to remove the battery cover. Insert two

batteries (size “AA”). Be sure to match the battery e/d terminals with the e/d marks inside the

compartment.

Before Operating Your Television

Battery

Cover

Pull up

Antennas

• The antenna requirements for good color television reception are more important than those for black

& white television reception. For this reason, a good quality outdoor antenna is strongly recommended.

The following is a brief explanation of the type of connections that are provided with the various

antenna systems:

Antenna Connections

F-type connector

75-ohm coaxial cable (round)

300-ohm twin-lead cable (flat)

1. A 75-ohm system is generally a round cable with

F-type connector that can easily be attached to

a terminal without tools (not supplied).

2. A 300-ohm system is a flat “twin-lead” cable that

can be attached to a 75-ohm terminal through a

300/75-ohm ADAPTOR (not supplied).

32C231(05-06) 3/27/03, 11:13 AM5

Dimension: 140mm x 215mm

CABLE TV (CATV) CONNECTION

•A 75 ohm coaxial cable connector is built into the set for easy hookup. When connecting the 75 ohm

coaxial cable to the set, screw the 75 ohm cable to the COAXIAL CABLE CONNECTOR.

• Some cable TV companies offer “premium pay channels”. Since the signals of these premium pay

channels are scrambled, a cable TV converter/descrambler is generally provided to the subscriber by

the cable TV company. This converter/descrambler is necessary for normal viewing of the scrambled

channels. (Set your TV on channel 3 or 4. Typically one of these channels is used. If this is unknown,

consult your cable TV company.) For more specific instructions on installing cable TV, consult your

cable TV company. One possible method of utilizing the converter/descrambler provided by your

cable TV company is explained below.

Please note: RF switch equipped with position A/B (not provided) is required.

“A” position on the RF switch (not supplied) : You can view all unscrambled channels using the TV’s

channel keys.

“B” position on the RF switch (not supplied) : You can view the scrambled channels via the converter/

descrambler using the converter’s channel keys.

Note:

• Consult your SHARP Dealer or Service Center for the type of splitter, RF switch or combiner that

might be required.

OUTDOOR ANTENNA CONNECTION

• Refer to one of the following two diagrams when connecting to an outdoor antenna.

A: Using a VHF/UHF combination outdoor antenna.

B: Using separate VHF and/or UHF outdoor antenna.

• Connect an outdoor antenna cable lead-in to the ANT/CABLE terminal on the rear of the TV set.

75-ohm

coaxial cable

300-ohm

twin-lead

VHF/UHF ANTENNA

300/75-ohm

ADAPTOR

(Not supplied)

REAR PANEL

A. Combination VHF/UHF Antennas B. Separate VHF/UHF Antenna

Antenna Connections (Continued)

IN OUT

300-ohm

twin-lead

300-ohm

twin-lead

75-ohm coaxial

cable

VHF

ANTENNA

UHF

ANTENNA

COMBINER

(not supplied)

REAR PANEL

OUT

Cable TV converter/

descrambler

(not supplied)

Two-set

signal

splitter

(not

supplied)

Cable TV Line

RF switch (not supplied)

OUT

F-type connector

75-ohm coaxial cable

When connecting the RF cable to the TV set, do not

tighten F-type connector with tools.

If tools are used, it may cause damage to your TV

set.

(The breaking of internal circuit, etc.)

F-type connector should be finger-tightened only.

NOTICE

32C231(05-06) 3/27/03, 11:13 AM6

Dimension: 140mm x 215mm

Quick Reference Control Operation

•

Part Names

Front Panel

Quick Reference Control Operation

Basic Remote Control Functions

POWER

Press → On.

Press again → Off.

REMOTE KEYPAD

Accesses any channel from keypad.

FLASHBACK

Returns to previous channel.

VOLUME UP/DOWN

(k) Increases sound.

(l) Decreases sound.

• Changes or selects the TV

adjustments on On-Screen Displey.

Press → Accesses MAIN MENU.

Press again → Exits MAIN MENU.

Infrared Transmitter Window

DISPLAY

Press → Displays receiving channel for

4 seconds.

Press again → Removes display.

•Temporarily displays receiving

channel when in Closed Caption

mode.

CHANNEL UP/DOWN

(a) Selects next higher channel.

(s) Selects next lower channel.

• See pages 28–30 for Channel

Setting.

• Moves the “ E ” mark on the MENU

screens.

MUTE

Press → Mutes sound.

Press again → Restores sound.

• When sound is muted, CLOSED

CAPTION appears if available.

INPUT

Press → Switches to external video

INPUT 1 mode.

Press twice → Switches to external video

INPUT 2 mode.

Press 3 times → Switches to external

video INPUT 3 mode.

Press 4 times → Switches back to the

original TV mode. See page 37.

VOLUME UP/DOWN

(k) Increases sound.

(l) Decreases sound.

VIDEO/AUDIO

TERMINALS

IN 2

CHANNEL UP/DOWN

(a) Selects next higher channel.

(s) Selects next lower channel.

POWER

Press → On.

Press again → Off.

Press → Accesses MAIN MENU.

Press again → Exits MAIN MENU.

REMOTE CONTROL

SENSOR

INSIDE DOOR

32C231(07) 3/27/03, 11:13 AM7

Dimension: 140mm x 215mm

•

When you turn on the TV for the first time, it will automatically

memorize the broadcasting channels.

Please perform the following instructions before pressing the

POWER button.

(1) Insert the batteries into the remote control. (See page 5)

(2) Connect the antenna cable to the TV set. (See pages 5, 6)

(3) Plug in the AC POWER cord to the wall outlet.

1 Press the POWER button on the TV set or on the Remote Control

to turn on the TV. The SELECT LANGUAGE screen will be

displayed.

2 Press CH 8/9 to select “ENGLISH”, “ESPAÑOL (SPANISH)” or

“FRANCAIS (FRENCH)”.

3 Press VOL +/– to access the EZ SETUP screen.

4 Press VOL +.

The tuner will automatically search for the

broadcasting and cable TV channels. (The CH No.

will automatically increase when it appears.)

If you want to stop the EZ SETUP process once it

has started, press VOL – and it will be canceled.

If you want to SET UP again, please refer to page

27 on SET UP.

To cancel EZ SETUP

Press VOL –.

5 Once EZ SETUP is complete, the lowest channel number

memorized will be displayed.

Note:

• If EZ SETUP does not memorize all the channels in your region, please refer to page 28–30 for more

information on manually memorizing the channels using CHANNEL SETTING.

• It may be difficult to PRESET when the broadcast signals are weak, the channel cycle frequency is

incorrect or frequency jamming is occurring around the area. Please refer to pages 28–30 for more

information on manually memorizing the channels using CHANNEL SETTING.

SELECT

ENGL I SH

FRANCA I S

SELECT : CH

SET : VOL

+–

ESPAÑOL

LANGUAGE

SELECT

ENGL I SH

FRANCA I S

SELECT : CH

SET : VOL

+–

ESPAÑOL

LANGUAGE

START

STOP START

SETUP?EZ

OR CAB L E.CONNECT AN TENNA

STOP START

PLEASE WA I T

125

AUTO PROGRAMMI NG

POWER

(EZ SETUP screen)

EZ SETUP during First Use

(On the Set)

POWER

(On the Remote Control)

(SELECT LANGUAGE screen)

(START)

(STOP)

POWER

CHANNEL

UP (a)/

DOWN (s)

VOLUME

(

)/(

)

32C231(08-09) 3/27/03, 11:13 AM8

Dimension: 140mm x 215mm

Demo Mode

•To learn more about the TV set, you can enter DEMO mode. Simply

press and hold MENU on the TV set for more than 3 seconds.

•To cancel DEMO mode, again press MENU on the TV set for more

than 3 seconds.

Example:

DEMO mode display

Accessing the MAIN MENU screen without Remote Control

•If you misplaced your Remote Control you can still access most settings

via the MAIN MENU screen by pressing MENU on the TV set.

• Some features of your TV set are not accessible without the Remote

Control. If you lost your Remote Control, contact a Sharp Service

Center for a replacement.

(On the Set)

button

32C231(08-09) 3/27/03, 11:13 AM9

Dimension: 140 X 215 mm

•

The language for the ON SCREEN DISPLAY can be set to ENGLISH, SPANISH or FRENCH.

1 Press MENU to access the MAIN MENU screen.

2 Press CH 8/9

to move the “[” mark to “SET UP”.

3 Press VOL

–

to access the SET UP screen, then press CH 8/9

move the “[” mark to “LANGUAGE”.

4 Press VOL

–

to access the LANGUAGE select screen.

5 Press CH 8/9 to select “ENGLISH”, “ESPAÑOL (SPANISH)” or

“FRANCAIS (FRENCH)”.

6 Press MENU to exit.

Sleep Timer

•

You can preset your television to turn off automatically in increments of 30, 60, 90, or 120 minutes.

1 Press MENU to access the MAIN MENU screen.

2 Press VOL

–

to access the SLEEP TIMER screen.

3 Press VOL

–

to set a sleep time of 30, 60, 90 or 120 minutes.

4 Press MENU to exit.

Note:

•To turn off the SLEEP TIMER, repeat the above SLEEP TIMER steps and select “– – – M REMAIN”

during step 3.

• While SLEEP TIMER is active, the time remaining will be briefly displayed on-screen at regular

intervals or when the Remote’s DISPLAY key is pressed twice. 5 minutes before the SLEEP TIMER

turns off the TV, the screen prompts the time remaining for 4 seconds. The SLEEP TIMER shows a

similar display for each remaining minute and a 10-second display right before shutting off the TV.

• If you turn the POWER OFF, the SLEEP TIMER will automatically reset.

Language

(SLEEP TIMER screen)

(LANGUAGE select screen)

(MAIN MENU screen)

→

(SET UP screen)

→

SLEEP T IMER

AUDI O SELECT

CLOSED CAPT I ON

PARENT CONTROL

ENERGY

SET UP

SAVE

VIDEO ADJUST

SLEEP T IMER

AUDI O SELECT

CLOSED CAPT I ON

PARENT CONTROL

ENERGY

SET UP

SAVE

VIDEO ADJUST

SLEEP T IMER

AUDI O SELECT

CLOSED CAPT I ON

PARENT CONTROL

ENERGY

SET UP

SAVE

VIDEO ADJUST

ENGL I SH

FRANCA I S

ESPA

LANGUAGE

ENGL I SH

FRANCA I S

ESPAÑ OL

IDIOMA

SLEEP T IMER

120M REMAIN

BLUE SCREEN

LANGUAGE

CH SETT ING

SCREEN FORMAT

/INPUT I D

AUTO I NPUT

SET UP

32C231(10-11) 3/27/03, 11:13 AM10

Dimension: 140 X 215 mm

•

Description of Adjustment Items

1 Press MENU to access the MAIN MENU screen.

2 Press CH 8/9

to move the “[” mark to “VIDEO ADJUST”.

3 Press VOL

–

to access the PICTURE adjust screen.

4 Press CH 8/9

to select the desired adjustment item. (Refer to

the diagram below.)

5 Press VOL

–

to adjust the setting.

6 Repeat steps 4 to 5 to adjust other settings.

7 Press MENU to exit.

Note:

• VIDEO ADJUST setting, once set, is shared among AIR/CABLE, INPUT 1, INPUT 2, and INPUT 3

modes.

• VIDEO ADJUST setting for INPUT 3 when used as COMPONENT can be set independently.

(PICTURE adjust screen)

→

VOL

increases contrast

VOL

–

decreases contrast

(MAIN MENU screen)

Video Adjust

PICTURE 50

SLEEP T IMER

AUDI O SELECT

CLOSED CAPT I ON

PARENT CONTROL

ENERGY

SET UP

SAVE

VIDEO ADJ UST

Selected item VOL

button VOL

–

button

PICTURE To increase contrast To decrease contrast

TINT To make skin tones greenish To make skin tones purplish

COLOR To increase color intensity To decrease color intensity

BRIGHT To increase brightness To decrease brightness

SHARP To increase sharpness To decrease sharpness

COLOR TEMP. To choose a LOW, ML, MH or HIGH color tone.

RESET To return all adjustments to factory preset levels.

PICTURE

TINT

COLOR

SHARP

COLOR TEMP.

RESET

: CH

BRIGHT

VOLUME

(

)/(

)

CHANNEL

UP (

DOWN (

)

32C231(10-11) 3/27/03, 11:13 AM11

Dimension: 140 X 215 mm

L MTS (Multichannel TV Sound)

This function allows reception of stereo or bilingual TV sound.

•

You can enjoy Hi-Fi stereo sound or SAP broadcasts where available.

Stereo broadcasts

Live television broadcasts of sports, shows, concerts, etc. can be received in dynamic stereo sound.

SAP broadcasts

Television broadcast can be received with either MAIN or SAP sound.

MAIN sound: The normal program soundtrack. (Monaural or stereo where available.)

SAP sound: Second language, supplementary commentaries, etc. (SAP sound is monaural.)

•

If stereo sound is difficult to hear;

You can obtain clearer sound by manually switching to fixed monaural mode.

1 Press MENU to access the MAIN MENU screen.

2 Press CH 8/9

to move the “[” mark to “AUDIO SELECT”.

3 Press VOL

–

to access the AUDIO SELECT screen.

4 Press CH 8/9

to move the “[” mark to “MTS” or

“AUDIO ADJUST”.

5 Press VOL

–

to select “STEREO”, “SAP” or “MONO” when the

“[” mark is at “MTS” position.

Audio Select

(MAIN MENU screen)

MTS

STEREO

SAP

MONO

SLEEP T IMER

AUDI O SELECT

CLOSED CAPT I ON

PARENT CONTROL

ENERGY

SET UP

SAVE

VIDEO ADJ UST

→

AUD I DJUSTOA

AU I ODSEECTL

MTS

:STEREO

(AUDIO SELECT screen)

→

AUD I DJUSTOA

AU I ODSEECTL

MTS

:STEREO

(AUDIO SELECT

screen

)

32C231(12-13) 3/27/03, 11:13 AM12

Dimension: 140 X 215 mm

L AUDIO ADJUST

When the “[” mark is at “AUDIO ADJUST”, press VOL

–

access the AUDIO ADJUST screen. To access the desired item,

press CH 8/9. To adjust the audio setting, press VOL

–

6 Press MENU to exit.

An example screen displaying ON AIR when receiving stereo broadcasts

Current channel number

“← ON AIR” will appear next to STEREO or

SAP when receiving STEREO or SAP

broadcasts.

Note:

• Once MONO mode is selected, the TV sound remains monaural even if the TV set receives a stereo

broadcast. You must switch the mode back to STEREO if you want to hear stereo sound again.

• Selecting MTS while receiving video signals from INPUT terminals does not change the type of

sound; in this case, sound is determined by the video source.

Audio Select (Continued)

STEREO

SAP

AIR

MONO

(CHANNEL call on screen)

TREBLE

RESET

BASS

BALANCE

Selected item VOL

button VOL

–

button

TREBLE To increase treble response. To decrease treble response.

BASS To increase bass response. To decrease bass response.

BALANCE To emphasize the right To emphasize the left

speaker’s volume. speaker’s volume.

RESET To return all adjustments to factory preset levels.

TREBLE 0

32C231(12-13) 3/27/03, 11:13 AM13

Dimension: 140 X 215 mm

•

How to set CLOSED CAPTION

•Your TV is equipped with an internal Closed Caption decoder. “Closed

Caption” is a system which allows conversations, narration, and sound

effects in TV programs and home videos to appear as captions on the

TV screen (see the illustration).

• Not all the programs and videos will offer closed captioning. Please

look for the “ ” symbol to ensure that captions will be shown.

• Closed Caption broadcast can be viewed in two modes: CAPTION

and TEXT. For each mode, two channels are available, CH1 and CH2:

The CAPTION mode shows subscripts of dialogs and commentaries

of TV dramas and news programs while allowing clear view of the

picture.

The TEXT mode displays over the picture other various information

(such as TV program schedule, weather forecast, etc.) that is

independent of the TV programs.

1 Press MENU to access the MAIN MENU screen.

2 Press CH 8/9

to move the “[” mark to “CLOSED CAPTION”.

3 Press VOL

–

to access the CLOSED CAPTION setting screen.

4 Press CH 8/9

to move the “[” mark to either “MODE” or “DATA”.

5 Press VOL

–

to change the CLOSED CAPTION setting.

6 Press MENU to exit.

Note:

• If a broadcast contains CLOSED CAPTION and the MUTE button is pressed, the set enters CAPTION

mode automatically. Pressing MUTE again will return the set to its previous condition.

• Closed Caption may malfunction (white blocks, strange characters, etc.) if signal conditions are poor

or if there are problems at the broadcast source. This does not necessarily indicate a problem with

your TV.

• If any button is pressed to call up the ON SCREEN DISPLAY while viewing a CLOSED CAPTION

broadcast, the closed captions will disappear momentarily.

• If no TEXT broadcast is being received while viewing in the TEXT mode, the screen may become

dark and blank for some programs. Should this occur, switch the Closed Caption mode to “OFF”.

CLOSED

MODE

CAPT ION

: CAPT I ON

DATA

: CH 1

DATA :CH 1

: CAPT I ONMODE

CLOSED CAPT ION

CLOSED

MODE

CAPT ION

: CAPT I ON

DATA

: CH 1

CAPTION

TEXT

OFF

CH 1

CH 2

→

SLEEP T IMER

AUDI O SELECT

CLOSED CAPT I ON

PARENT CONTROL

ENERGY

SET UP

SAVE

VIDEO ADJ UST

Closed Caption

(MAIN MENU screen)

(CLOSED CAPTION setting screen)

MODE :

DATA :

VOLUME

(

)/(

)

CHANNEL

UP (

DOWN (

)

32C231(14-16) 3/27/03, 11:14 AM14

Dimension: 140 X 215 mm

1. User setting 2. Block table

age

based

not to

block

not to

block

Select

block

auto-

block

auto-

block

auto-

block

PG-13

NC-17

– – – – –

BLOCK

PG-13

NC-17

1. User setting 2. Block table

age

based

not to

block

not to

block

not to

block

Select

block

auto-

block

auto-

block

PG-13

NC-17

– – – – –

BLOCK

PG-13

NC-17

Parent Control (V-CHIP Operation)

L V-CHIP

• This function allows you to restrict TV programs and also allows you to control TV usage based on

FCC data. This function is to prevent your children from watching violence or sexual scenes that may

be harmful.

• Restriction of TV programs includes two characters that contain information about the program’s MPAA

rating and the TV Parental Guidelines. MPAA is restricted by age. TV Parental Guidelines are restricted

by age and contents.

• Since a TV program may use either the MPAA rating or the TV Guidelines you should adjust both for

complete control.

[1] MPAA RATING

RATING

G GENERAL AUDIENCES. All ages admitted.

PG PARENTAL GUIDANCE SUGGESTED. Some material may not be suitable for

children.

PG-13 PARENTS STRONGLY CAUTIONED. Some material may be inappropriate for

children under 13.

R RESTRICTED. Under 17 requires accompanying parent or adult guardian.

NC-17 NO ONE 17 AND UNDER ADMITTED.

XX Rating is an older rating that is unified with NC-17 but may be encoded on

older movie’s data.Note:

• MPAA RATING

Example 1:

“PG-13” in the age-based rating is blocked, this

will automatically block the higher ratings “R”,

“NC-17”, “X” also.

Note:

•MPAA RATING is only age-based.

[2] TV PARENTAL GUIDELINES

content based

AGE D L S V FV

(Sexually (Adult (Sexual (Violence) (Fantasy

Suggestive Language) Situation) Violence)

Dialog)

TV-Y (All children)

–––––

TV-Y7 (Direct to Older Children)

––––

TV-G (General Audience)

–––––

TV-PG (Parental Guidance

V V V V V

–

Suggested)

TV-14 (Parents Strongly

V V V V V

–

Cautioned)

TV-MA (Mature Audience Only)

–

V V V

–

: Content Rating can be set.

l : Content Rating cannot be set (not normally broadcast by TV station).

Example 2:

“R” in the age-based rating is blocked, this will

automatically block the higher rating “NC-17”, “X”

also.

age

based

RATING

age

based

32C231(14-16) 3/27/03, 11:14 AM15

Dimension: 140 X 215 mm

Parent Control (V-CHIP Operation) (Continued)

• TV PARENTAL GUIDELINES (Example)

Example 1.1 : Age Based setting

Clear

s (block) from each "AGE" box for all ratings.

This will automatically unblock everything.

Example 1.2 : Age Based setting

For “TV-G” put a

in the "AGE" box. This will automatically block the

higher age ratings “TV-PG”, “TV-14” and “TV-MA” as well as “TV-G”.

Please note the content ratings “D”, “L”, “S”, “V” are automatically blocked

as well.

Example 2.1 : Content Based setting

If you choose to unblock every content-based items (“D”, “L”, “S”, “V”),

clear the

(block) from each “AGE” box of “TV-PG”, “TV-14” and “TV-

MA”.

Example 2.2 : Content Based setting

Put a

in the box corresponding to “TV-PG” (row) and “V (Violence)”

(column). This will automatically block the “V” boxes for “TV-14” and

“TV-MA”. Setting only “TV-PG-V”, “TV-14-V” or “TV-MA-V” will not block

all programs rated “TV-PG”, “TV-14” or “TV-MA”.

Example 3 : Resetting an Age Based setting

For “TV-14”, put a

(block) in the “AGE” box.

This will again automatically block the content ratings “D”, “L”, “S”, “V”

for “TV-MA” as well as “TV-14” (“D” is not available for “TV-MA”).

Please note that the lower age rating “TV-PG” does not change from its

previous settings after this.

Note:

• Content ratings can be modified but only in the combinations indicated by

in the table on page 15.

• Changing a lower age rating’s content setting to “BLOCK” automatically changes the same higher age

rating’s content setting to “BLOCK” regardless of their previous settings.

• Changing a lower rating’s “AGE” setting to “BLOCK” automatically changes all higher ratings to “BLOCK”

regardless of their previous settings.

•For “TV-Y7”, “TV-PG”, “TV-14” and “TV-MA”, if you clear the

in the “AGE” box (unblock) you can still

change settings based on content.

•Clearing a higher rating’s age or content setting will not clear lower settings. Make sure that all undesired

boxes are blocked.

[3] ADDITIONAL MODE

Besides “MPAA RATINGS” and “TV PARENTAL GUIDELINES”, new ratings system’s data can be

downloaded when they become available. (See page 19.)

TV–Y

TV–Y7

TV–G

TV–PG

TV–14

TV–MA

MENU : RETURN

GAE

–

BLOCK

VIEW

TV–Y

TV–Y7

TV–G

TV–PG

TV–14

TV–MA

MENU : RETURN

GAE

–

VVVV

VVV

BLOCK

VIEW

–

TV–Y

TV–Y7

TV–G

TV–PG

TV–14

TV–MA

MENU : RETURN

GAE

–

BLOCK

VIEW

TV–Y

TV–Y7

TV–G

TV–PG

TV–14

TV–MA

MENU : RETURN

GAE

–

BLOCK

VIEW

TV–Y

TV–Y7

TV–G

TV–PG

TV–14

TV–MA

MENU : RETURN

GAE

–

BLOCK

VIEW

32C231(14-16) 3/27/03, 11:14 AM16

Dimension: 140 X 215 mm

•

How to set V-CHIP

[1] MPAA RATING

1 Press MENU to access the MAIN MENU screen.

2 Press CH

8/9 to move the “[” mark to “PARENT CONTROL”.

3 Press VOL

+/– to access the PARENT CONTROL screen.

4 Press VOL

+/– to access the V-CHIP select screen.

Note:

• If SECRET No. is already set, enter the SECRET No.

(See

•

To change the V-CHIP BLOCK after

registering a secret No. on page 22.).

5 Press VOL

–

to select “MPAA”. Press CH

8/9 to move the “[”

mark to “PG”, then press VOL

–

to select BLOCK. If you set

“PG” to BLOCK, “PG-13”, “R”, “NC-17” and “X” are automatically

blocked.

6 Press MENU to return to the V-CHIP select screen.

(PARENT CONTROL screen)

(V-CHIP select screen)

(MAIN MENU screen)

SLEEP T IMER

AUDI O SELECT

CLOSED CAPT I ON

PARENT CONTROL

ENERGY

SET UP

SAVE

VIDEO ADJ UST

SLEEP T IMER

AUDI O SELECT

CLOSED CAPT I ON

PARENT CONTROL

ENERGY

SET UP

SAVE

VIDEO ADJ UST

VIEW TIMER

V–CH I P BLOCK

PARENT CONTROL

MP AA

TV GUI DEL I NES

AD : OFFDOWNLO

STATUS :OFF

PG– 1 3

NC– 1 7

B:LOCK

–: ––––

MENU : RETURN

→

Parent Control (V-CHIP Operation) (Continued)

→

VOLUME

(

)/(

)

CHANNEL

UP (a)/

DOWN (b)

32C231(17-18) 3/27/03, 11:14 AM17

Dimension: 140 X 215 mm

7 Press MENU, then “INPUT SECRET No.” will be displayed.

Note:

• If SECRET No. is already set, skip to step 9.

8 Enter a 4-digit SECRET No. using the REMOTE KEYPAD.

When done, press MENU

to exit.

Note:

• If you set “G” to BLOCK , all ratings are automatically blocked.

• If you set “X” to BLOCK, “G”, “PG”, “PG-13”, “R” and “NC-17” are not blocked.

[2] TV GUIDELINES

1 Repeat steps 1 to 4 of [1] MPAA RATING.

2 Press CH

8/9 to move the “[” mark to “TV GUIDELINES”.

3 Press VOL

–

to access the TV GUIDELINES screen.

4 To change AGE and CONTENT SETTING, press CH

8/9 to move

the “[” mark to the desired rating and then press VOL

–

to select.

5 Press CH

8/9 to move the “[” mark to the desired content item

and then press VOL

–

to select either “BLOCK” or “– – – – –”

(unblock).

6 Press MENU

to return to the TV GUIDELINES screen.

7 Repeat steps 4 to 6 until all ratings and their contents are set.

When done, press MENU

to return to V-CHIP selct screen.

9 Press MENU to exit.

Note:

• If SECRET No. is not set, enter a SECRET No. as show in steps 7 and 8 of [1] MPAA RATING.

→

Parent Control (V-CHIP Operation) (Continued)

(TV GUIDELINES screen)

(CONTENT RATING screen)

(V-CHIP select screen)

321

654

987

100

ENTER

I NPU T

––––

SECRET No .

I NPU T

1234

SECRET No .

MP AA

TV GUI DEL I NES

AD : OFFDOWNLO

STATUS :OFF

TV–Y

TV–Y7

TV–G

TV–PG

TV–14

TV–MA

MENU : RETURN

GAE

–

BLOCK

VIEW

–

TV–Y7

BLOCK

–––––

MENU : RETURN

TV–Y

TV–Y7

TV–G

TV–PG

TV–14

TV–MA

MENU : RETURN

GAE

–

––

–

VVVV

VVV

BLOCK

VIEW

→

32C231(17-18) 3/27/03, 11:14 AM18

Dimension: 140 X 215 mm

Parent Control (V-CHIP Operation Continued)Parent Control (V-CHIP Operation) (Continued)

[3] Downloading additional rating mode

There will be an additional new rating system. In that case,

please set up as follows. Subsequently the new rating

system will set up automatically.

1 Repeat steps 1 to 4 of [1] MPAA RATING.

2 Press CH 8/9 to move the “[” mark to “DOWNLOAD”.

3 Press VOL

–

to select “DOWNLOAD : ON”.

4 Press MENU, then “INPUT SECRET No.” will be displayed.

Note:

•

If SECRET No. is already set, skip to step 6.

5 Enter a 4-digit secret No. using the REMOTE KEYPAD.

6 Press MENU to exit.

•

Downloading V-CHIP data

1 If you watch a program containing “new rating system data”, the

DOWNLOAD screen will be displayed.

2 The DOWNLOAD screen will disappear, once downloading is finished.

Note:

•

DOWNLOAD will not start, if you are not watching a program containing “new rating system data”.

MP AA

TV GUI DEL I NES

AD : OFFDOWNLO

STATUS :OFF

MP AA

TV GUI DEL I NES

AD : ONDOWNLO

STATUS :OFF

PL AESE AWTI

NOW DOWNLOADI

V–CH IP DATA

I NPU T

––––

SECRET No .

I NPU T

1234

SECRET No .

321

654

987

100

ENTER

(DOWNLOAD screen)

VOLUME

(

)/(

)

CHANNEL

UP (

DOWN (

)

REMOTE

KEYPAD

32C231(19-22) 3/27/03, 11:14 AM19

Dimension: 140 X 215 mm

•

How to set additional rating mode (Example)

Once downloading is complete, you can set the blocking pattern as follows.

1 Repeat steps 1 to 4 of [1] MPAA RATING.

2 Press CH 8/9 to move the “[” mark to “Cdn. English Ratings”,

then press VOL k/l.

3 You can select “BLOCK” or “– – – – –” (unblock) for each rating

item by pressing CH 8/9 and VOL

–

4 You can select “BLOCK” or “– – – – –” (unblock) for each rating

item by pressing CH 8/9 and VOL

–

if you select “Cdn. French

Ratings” in step 2.

Note:

•You are able to download up to 4 different rating systems.

MPAA

TV GU I

Cdn .

DOWNL

nEglis Rhatinsg

Cdn .

rFenchRatinsg

EDLINES

OAD : ON

STATU

S:ON

(After downloading the

rating data)

C8+

14+

18+

INDIV

B:LOCK

–: ––––

B:LOCK

–: ––––

B:LOCK

–: ––––

IDUAL BL

MENU : RETURN

OCK

(ENGLISH INDIVIDUAL

BLOCK screen)

13+

16+

18+

INDIV

–: ––––

B:LOCK

–: ––––

B:LOCK

–: ––––

IDUAL BL

MENU : RETURN

OCK

(FRENCH INDIVIDUAL

BLOCK screen)

→

Parent Control (V-CHIP Operation) (Continued)

32C231(19-22) 3/27/03, 11:14 AM20

La page charge ...

Sharp 32C231 Manuel utilisateur

Marque: Sharp

Modèle: 32C231

Catégorie: Téléviseurs CRT

Taper: Manuel utilisateur

Ce manuel convient également à

CRT Television 32C231

Télécharger le PDF

rapport

dans d''autres langues

English: Sharp 32C231 User manual
español: Sharp 32C231 Manual de usuario

Sharp 32C231 Manuel utilisateur

Ce manuel convient également à

Sharp 32C231 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents