LG 60UL3E-B Le manuel du propriétaire

AAA

www.lg.com/id-manual

LG Digital Signage

(MONITOR SIGNAGE)

60UL3E

70UL3E

ENGLISH

Easy Setup Guide

Please read this manual carefully before operating your set and retain it for future reference.

ESPAÑOL

Guía Rápida de Configuración

Lea atentamente este manual antes de poner en marcha el equipo y consérvelo para futuras consultas.

FRANÇAIS

Guide de configuration rapide

Avant d’utiliser l’appareil, veuillez lire attentivement ce manuel et le conserver pour pouvoir vous y reporter

ultérieurement.

Printed in Korea

Depending upon model / Selon le modèle / Según el modelo

ENGLISH Read Safety and Reference.

ESPAÑOL Leer Seguridad y Consultas.

FRANÇAIS Lisez Sécurité et références.

1

2

43

1

2

0

Stand Model Name

Nombre del modelo del soporte

Nom du modèle de socle

60UL3E-BJ

1,368

(53.8)

1 368

(53,8)

796

(31.3)

796

(31,3)

89.1

(3.5)

89,1

(3,5)

19.4

(42.7)

19,4

(42,7)

205 W ST-60UL3RB

70UL3E-TJ

1,573

(61.9)

1 573

(61,9)

910

(35.8)

910

(35,8)

69.0

(2.7)

69,0

(2,7)

32.5

(71.6)

32,5

(71,6)

270 W ST-70UL3DT

60UL3E-BJ AC 100 - 240 V ~ 50 / 60 Hz

70UL3E-TJ AC 120 V ~ 50 / 60 Hz

*MFL70780601*

(1809-REV01)

(Pour les États-Unis et le Canada)

Ce produit est conforme aux normes

ENERGY STAR® lorsque le « réglage

d’usine par défaut (Résidentiel) » est

sélectionné. Modier les réglages

d’usine par défaut ou activer d’autres

fonctionnalités augmente la consommation

d’énergie qui pourrait alors dépasser les limites de

la qualication ENERGY STAR®. Consultez le site

ENERGYSTAR.gov pour en savoir plus au sujet du

programme ENERGY STAR®.

(For USA and Canada only)

(Para Estados Unidos y Canadá)

This product qualies for ENERGY

STAR® in the factory default (Home

conguration) setting. Changing the

factory default settings or enabling

other features may increase power consumption

that could exceed the limits necessary to quality

for ENERGY STAR®. Refer to ENERGYSTAR.gov

for more information on the ENERGY STAR®

program.

60UL3E

70UL3E

Please read this manual carefully before operating your set and retain it

for future reference.

OWNER’S MANUAL

Safety and Reference

LG Digital Signage

(MONITOR SIGNAGE)

www.lg.com

Printed in Korea

*MFL70780503*

(1809-REV00)

ENGLISH

2

Important Safety Instruction

• Read these instructions.

• Keep these instructions.

• Heed all warnings.

• Follow all instructions.

• Do not use this apparatus near water.

• Clean only with dry cloth.

• Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including

amplifiers) that produce heat.

• Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with

one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade

or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an

electrician for replacement of the obsolete outlet.

• Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the

point where they exit from the apparatus.

• Only use attachments/accessories specified by the manufacturer.

• Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.

When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

• Unplug this apparatus during lightning storms or when unused for long periods of time.

• Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in

any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the

apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

ENGLISH

3

Warning! Safety instructions

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION : TO REDUCE THE RISK OF ELECTRIC

SHOCK DO NOT REMOVE COVER (OR BACK).

NO USER SERVICEABLE PARTS INSIDE. REFER TO

QUALIFIED SERVICE PERSONNEL.

The symbol is intended to alert the user to

the presence of uninsulated dangerous

voltage within the product’s enclosure that may

be of sufficient magnitude to constitute a risk of

electric shock to persons.

The symbol is intended to alert the user to

the presence of important operating and

maintenance (servicing) instructions in the

literature accompanying the device.

WARNING : TO REDUCE THE RISK OF FIRE

AND ELECTRIC SHOCK, DO NOT EXPOSE THIS

PRODUCT TO RAIN OR MOISTURE.

• TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR

OTHER ITEMS WITH OPEN FLAMES AWAY FROM THIS

PRODUCT AT ALL TIMES.

• Do not place the monitor and/or remote control

in the following environments:

- Keep the product away from direct sunlight.

- An area with high humidity such as a bathroom

- Near any heat source such as stoves and other

devices that produce heat.

- Near kitchen counters or humidifiers where they

can easily be exposed to steam or oil.

- An area exposed to rain or wind.

- Do not expose to dripping or splashing and do

not place objects filled with liquids, such as vases,

cups, etc. on or over the apparatus (e.g., on shelves

above the unit).

- Near flammable objects such as gasoline or

candles, or expose the monitor to direct air

conditioning.

- Do not install in excessively dusty places.

Otherwise, this may result in fire, electric shock,

combustion/ explosion, malfunction or product

deformation.

• Ventilation

- Install your monitor where there is proper

ventilation. Do not install in a confined space such

as a bookcase.

- Do not install the product on a carpet or cushion.

- Do not block or cover the product with cloth or

other materials while unit is plugged in.

• Take care not to touch the ventilation openings.

When watching the monitor for a long period, the

ventilation openings may become hot.

• Protect the power cord from physical or mechanical

abuse, such as being twisted, kinked, pinched,

closed in a door, or walked upon. Pay particular

attention to plugs, wall outlets, and the point where

the cord exits the device.

• Do not move the monitor whilst the Power cord is

plugged in.

• Do not use a damaged or loosely fitting power cord.

• Be sure to grasp the plug when unplugging the

power cord. Do not pull on the power cord to unplug

the monitor.

• Do not connect too many devices to the same AC

power outlet as this could result in fire or electric

shock.

• Disconnecting the Device from the Main Power

- The power plug is the disconnecting device. In

case of an emergency, the power plug must remain

readily accessible.

• Do not let your children climb or cling onto the

monitor. Otherwise, the monitor may fall over, which

may cause serious injury.

ENGLISH

4

• Make sure the power cord is connected securely to

the monitor and wall socket if not secured damage

to the Plug and socket may occur and in extreme

cases a fire may break out.

• Do not insert metallic or inflammable objects into

the product. If a foreign object is dropped into the

product, unplug the power cord and contact the

customer service.

• Do not touch the end of the power cord while it is

plugged in. You may be electrocuted.

• If any of the following occur, unplug the product

immediately and contact your local customer

service.

- The product has been damaged.

- If water or another substance enters the product

(like an AC adapter, power cord, or monitor).

- If you smell smoke or other odors coming from the

monitor.

- When lightning storms or when unused for long

periods of time.

Even the monitor is turned off by remote control or

button, AC power source is connected to the unit if

not unplugged in.

• Do not use high voltage electrical equipment near

the monitor (e.g., a bug zapper). This may result in

product malfunction.

• Do not attempt to modify this product in any way

without written authorization from LG Electronics.

Accidental fire or electric shock can occur. Contact

your local customer service for service or repair.

Unauthorized modification could void the user’s

authority to operate this product.

• Use only an authorized attachments / accessories

approved by LG Electronics. Otherwise, this may

result in fire, electric shock, malfunction, or product

damage.

• Never disassemble the AC adapter or power cord.

This may result in fire or electric shock.

• Handle the adapter carefully to avoid dropping or

striking it. An impact could damage the adapter.

• To reduce the risk of fire or electrical shock, do not

touch the monitor with wet hands. If the power cord

prongs are wet or covered with dust, dry the power

plug completely or wipe dust off.

• Batteries

- Store the accessories (battery, etc.) in a safe

location out of the reach of children.

- Do not short circuit, disassemble, or allow the

batteries to overheat. Do not dispose of batteries

in a fire. Batteries should not be exposed to

excessive heat.

• Moving

- When moving, make sure the product is turned

off, unplugged, and all cables have been removed.

It may take 2 or more people to carry larger

monitors. Do not press or put stress on the front

panel of the monitor. Otherwise, this may result in

product damage, fire hazard or injury.

• Keep the packing anti-moisture material or vinyl

packing out of the reach of children.

• Do not allow an impact shock, any objects to fall

into the product, and do not drop anything onto the

screen.

• Do not press strongly upon the panel with a hand or

a sharp object such as a nail, pencil, or pen, or make

a scratch on it. It may cause damage to screen.

• Cleaning

- When cleaning, unplug the power cord and wipe

gently with a soft/dry cloth. Do not spray water

or other liquids directly on the monitor. Do not

clean your monitor with chemicals including glass

cleaner, any type of air freshener, insecticide,

lubricants, wax (car, industrial), abrasive, thinner,

benzene, alcohol etc., which can damage the

product and/or its panel. Otherwise, this may result

in electric shock or product damage.

ENGLISH

5

Preparing

• When the monitor is turned on for the first time after

being shipped from the factory, initialization of the

monitor may take approximately one minute.

• Image shown may differ from your monitor.

• Your monitor’s OSD (On Screen Display) may differ

slightly from that shown in this manual.

• The available menus and options may differ from the

input source or product model that you are using.

• New features may be added to this monitor in the

future.

• The device must be easily accessed to a location

outlet near the access. Some devices are not made

by turning on / off button, turning off the device and

unplugging the power cord.

• The items supplied with your product may vary

depending upon the model.

• Product specifications or contents of this manual

may be changed without prior notice due to

upgrade of product functions.

• For an optimal connection, HDMI cables and USB

devices should have bezels less than 10 mm (0.39

inches) thick and 18 mm (0.7 inches) width.

• Use an extension cable that supports USB 2.0 if the

USB cable or USB flash drive does not fit into your

monitor’s USB port.

• Use a certified cable with the HDMI logo attached.

If you do not use a certified HDMI cable, the screen

may not display or a connection error may occur.

• Recommended HDMI cable types (3 m (9.84 feet) or

less)

• High-Speed HDMI®/™ cable

• High-Speed HDMI®/™ cable with Ethernet

A

B

A

B

* A 10 mm

(0.39 inches)

* B 18 mm

(0.7 inches)

• Do not use any unapproved items to ensure the

safety and lifespan of the product.

• Any damages or injuries by using unapproved items

are not covered by the warranty.

• Some models appear to have a thin film on the

screen. It is actually part of the screen; do not

remove it.

Optional Extras

Stand

Model Stand

60UL3E ST-60UL3RB

70UL3E ST-70UL3DT

Optional extras can be changed or modified for quality

improvement without any notification.

Contact your dealer for buying these items.

These devices work only with certain models.

The model name or design may be changed due to

the manufacturer’s circumstances or policies.

Wall Mounting Bracket

Make sure to use screws and wall mounts that meet

the VESA standard. Standard dimensions for the wall

mount kits are described in the following table.

A

B

Model

60UL3E 70UL3E

VESA (A x B)

300 x 300 600 x 400

Standard screw

M6 M8

Number of screws

4 4

Wall mount bracket

(optional)

OLW480B LSW640B

ENGLISH

6

Lifting and Moving the

Monitor

When moving or lifting the monitor, read the following

to prevent the monitor from being scratched or

damaged and for safe transportation regardless of its

type and size.

• It is recommended to move the monitor in the box

or packing material that the monitor originally came

in.

• Before moving or lifting the monitor, disconnect the

power cord and all cables.

• When holding the monitor, the screen should face

away from you to avoid damage.

• Hold the top and bottom of the monitor frame

firmly. Make sure not to hold the transparent part,

speaker, or speaker grille area.

• Use at least two people to move a large monitor.

• When transporting the monitor by hand, hold the

monitor as shown in the following illustration.

• When transporting the monitor, do not expose the

monitor to jolts or excessive vibration.

• When transporting the monitor, keep the monitor

upright; never turn the monitor on its side or tilt

towards the left or right.

• When handling the monitor, be careful not to

damage the protruding buttons.

• Avoid touching the screen at all times, as this

may result in damage to the screen.

• Do not place the product on the floor with

its front facing down without padding.

Failure to do so may result in damage to the

screen.

• Do not move the monitor by holding the

cable holders, as the cable holders may

break, and injuries and damage to the

monitor may occur. (Depending upon

model)

• When attaching the stand to the monitor

set, place the screen facing down on a

cushioned table or flat surface to protect the

screen from scratches.

ENGLISH

7

Using the Kensington Security

System (optional)

The Kensington security system connector is located

at the rear of the monitor. For more information of

installation and using, refer to the manual provided

with the Kensington security system or visit

http://www.kensington.com. Connect the Kensington

security system cable between the monitor and a

table.

(Depending upon model)

• The Kensington security system is optional. You can

obtain additional accessories from your local dealer.

Mounting on a Wall

An optional wall mount can be used with your LG

monitor. Consult with your local dealer for a wall

mount that supports the VESA standard used by

your monitor model. Carefully attach the wall mount

bracket at the rear of the monitor. Install the wall

mount bracket on a solid wall perpendicular to the

floor. If you are attaching the monitor to other building

materials, please contact qualified personnel to install

the wall mount. Detailed instructions will be included

with the wall mount. We recommend that you use

an LG brand wall mount. The LG wall mount is easy

to adjust or to connect the cables. When you do not

use LG’s wall mount bracket, use a wall mount bracket

where the device is adequately secured to the wall

with enough space to allow connectivity to external

devices. If you are using a non-adjustable mount,

attach the mount to the wall. Attach the cables to the

monitor first, then attach the monitor to the mount.

10 cm

(4 inches)

(Depending upon model)

ENGLISH

8

• Remove the stand before installing the

monitor on a wall mount by performing the

stand attachment in reverse.

• For more information of screws and wall

mount bracket, refer to the Separate

purchase.

• If you intend to mount the product to a wall,

attach VESA standard mounting interface

(optional parts) to the back of the product.

When you install the set to use the wall

mounting bracket (optional parts), fix it

carefully so as not to drop.

• When mounting a monitor on the wall, make

sure not to install the monitor by hanging

the power and signal cables on the back of

the monitor.

• Do not install this product on a wall if it

could be exposed to oil or oil mist. This may

damage the product and cause it to fall.

• When installing the wall mounting bracket, it is

recommended to cover the stand hole using tape,

in order to prevent the influx of dust and insects.

(Depending upon model)

Stand hole

Connections

You can connect various external devices to the

monitor. For more information on external device’s

connection, refer to the manual provided with each

device.

Other connections

Connect your monitor to external devices. For the best

picture and audio quality, connect the external device

and the monitor with the HDMI cable.

HDMI

• Supported HDMI Audio format :

(Depending upon model)

DTS (44.1 kHz / 48 kHz / 88.2 kHz / 96 kHz),

DTS HD (44.1 kHz / 48 kHz / 88.2 kHz / 96 kHz /

176.4 kHz / 192 kHz),

Dolby Digital / Dolby Digital Plus (32 kHz / 44.1 kHz

/ 48 kHz),

PCM (32 kHz / 44.1 kHz / 48 kHz / 96 kHz / 192 kHz)

• DTV Audio Supported Codec: MPEG, Dolby Digital

• ( ) [Picture] [Additional

Settings]

[HDMI ULTRA HD Deep Color]

- On : Support 4K @ 60 Hz (4:4:4, 4:2:2, 4:2:0)

- Off : Support 4K @ 60 Hz 8 bit (4:2:0)

If the device connected to Input Port also supports

ULTRA HD Deep Color, your picture may be clearer.

However, if the device doesn’t support it, it may not

work properly. In that case, change the monitor’s

[HDMI ULTRA HD Deep Color] setting to off.

- This feature is available only on certain models

which support HDMI ULTRA HD Deep Color.

ENGLISH

9

USB

• Some USB Hubs may not work. If a USB device

connected through a USB Hub is not detected,

connect it directly to the USB port on the monitor.

External Devices

Supported external devices are: Blu-ray player, HD

receivers, DVD players, VCRs, audio systems, USB

storage devices, PC, gaming devices, and other

external devices.

• The external device connections shown may differ

slightly from illustrations in a manual.

• Connect external devices to the monitor regardless

about the order of the monitor port.

• If you connect a gaming device to the monitor, use

the cable supplied with the gaming device.

• Refer to the external equipment’s manual for

operating instructions.

• In PC mode, there may be noise associated with the

resolution, vertical pattern, contrast or brightness.

If noise is present, change the PC output to another

resolution, change the refresh rate to another rate or

adjust the brightness and contrast on the [Picture]

menu until the picture is clear. Depending upon

the graphics card, some resolution settings may

not allow the image to be positioned on the screen

properly.

• When connecting via a wired LAN, it is

recommended to use a CAT 7 cable.

Network setup

(Depending upon model)

Wired network connection

This monitor can be connected to a Pro:Centric

server via the LAN port. After making the physical

connection, the monitor needs to be set up for

network communication.

Connect the LAN port of the Modem or Router from

Pro:Centric server to the LAN port on the monitor.

2 1

Broadband Modem

Pro:Centric Server

(Depending upon

model)

Broadband Modem

Pro:Centric Server

(Depending upon

model)

Router

Broadband Modem

1 Connect the LAN port of the Modem or Router to

the LAN port on the monitor.

2 Connect the LAN port of the PC to the AUX LAN

port on the monitor. (Depending upon model)

• Do not connect a modular phone cable to the LAN

port.

• Since there are various connection methods, please

follow the specifications of your telecommunication

carrier or internet service provider.

ENGLISH

10

Using the Button

You can simply operate the monitor functions, using

the button.

Basic Functions

Power On (Press)

Power Off

1

(Press and Hold)

Menu control (Press

2

)

Menu selection (Press and Hold

3

)

1 All running apps will close.

2 You can access and adjust the menu by pressing the

button when monitor is on.

3 You can use the function when you access menu

control.

Adjusting the Menu

When the monitor is turned on, press the button

one time. You can adjust the Menu items using the

button.

Turns the power off.

Changes the input source.

Adjusts the volume level.

Using Remote Control

The descriptions in this manual are based on the

buttons on the remote control. Please read this

manual carefully and use the monitor correctly.

To install batteries, open the battery cover, replace

batteries (1.5 V AAA) matching the

and ends

to the label inside the compartment, and close the

battery cover.

To remove the batteries, perform the installation

actions in reverse. This remote uses infrared light.

When in use, it should be pointed in the direction of

the monitor’s remote sensor.

(Some buttons and services may not be provided

depending upon models or regions.)

ENGLISH

11

(Power) Turns the monitor on or off.

Turns the monitor on.

Turns the monitor off.

Reduces power consumption by

adjusting peak screen brightness.

Changes the input source.

Used for viewing 3D videos.

Toggles between numerical and alphabetical.

Number and Alphabet buttons Enters numerical or

alphabetical characters depending upon the setting.

Deletes the entered numerical or alphabetical

character.

Volume Up/Down Button Adjusts the volume.

Selects the Aspect Ratio mode.

Automatically adjusts picture position and

minimizes image instability (available for RGB input

only).

Mutes all sounds.

Adjusts the brightness of the display.

Selects the [Picture Mode].

Displays the input information.

Enters the [White Balance] menu.

Accesses the main menus or saves your

input and exit menus.

SuperSign menu key.

Navigation Buttons Scrolls through menus or

options.

Selects menus or options and confirms your input.

Allows you to move back one step in the

user interaction function.

Quit all OSD tasks and applications.

Allows you to control various

multimedia devices to enjoy multimedia simply by

using the remote control through the SimpLink menu.

Selects the TILE Mode.

When the Picture ID number

matches the Set ID number, you can control

whichever monitor you want in multi-display format.

( keys are multi-function key. In

special case, those keys can be operated as color key.)

USB Menu Control Buttons Controls media playback.

May not be

supported on some models.

• Do not mix new batteries with old batteries.

This may cause the batteries to overheat

and leak.

• Failure to match the correct polarities of

the battery may cause the battery to burst

or leak, resulting in fire, personal injury, or

ambient pollution.

• This apparatus uses batteries. In your

community there might be regulations

that require you to dispose of these

batteries properly due to environmental

considerations. Please contact your

local authorities for disposal or recycling

information.

• Batteries inside or inside the product shall

not be exposed to excessive heat such as

sunshine, fire or the like.

ENGLISH

12

Troubleshooting

The software may be updated for improvement in

performance. The customer is responsible to ensure

the compatibility of their equipment with any LG

Electronics software. If needed, please consult with

LG Electronics and update new software versions

according to the guidance provided by LG Electronics.

• Cannot control the monitor with the remote control.

- Check if anything such as tape has been placed

over the receiver.

- Check if there is any obstacle between the

product and the remote control.

- Replace the batteries with new fresh ones.

• No image display and no sound is produced.

- Check if the product is turned on.

- Check if the power cord is connected to a wall

outlet.

- Check if there is a problem in the wall outlet by

connecting other products.

• The monitor turns off suddenly.

- Check the power control settings. The power

supply may be interrupted.

- Check if the auto-off function is activated on the

settings related time.

- If there is no signal while the monitor is on,

the monitor will turn off automatically after 15

minutes of inactivity.

• When connecting to the PC (HDMI), no signal is

detected.

- Turn the monitor off/on using the remote control.

- Reconnect the HDMI cable.

- Restart the PC with the monitor on.

• Abnormal Display

- If the monitor feels cold to the touch, there may

be a small flicker when it is turned on. This is

normal; there is nothing wrong with monitor.

Some minute dot defects may be visible on the

screen, appearing as tiny red, green, or blue

spots. However, they have no adverse effect on

the monitor’s performance. Avoid touching the

LCD screen or holding your finger(s) against it for

long periods of time. Doing so may produce some

temporary distortion effects on the screen.

- This panel is an advanced product that contains

millions of pixels. In a very few cases, you could

see fine dots on the screen while you’re viewing

the monitor. Those dots are deactivated pixels and

do not affect the performance and reliability of

the monitor.

- Displaying a still image for a prolonged period

of time may cause an image sticking. Avoid

displaying a fixed image on the monitor screen for

an extended length of time.

• Generated Sound

- Cracking noise A cracking noise that occurs

when watching or turning off the monitor is

generated by plastic thermal contraction due to

temperature and humidity. This noise is common

for products where thermal deformation is

required.

- Electrical circuit humming/panel buzzing

A low level noise is generated from a high-

speed switching circuit, which supplies a large

amount of current to operate a product. It varies

depending upon the product. This generated

sound does not affect the performance and

reliability of the product.

• When cleaning the product, be careful not

to allow any liquid or foreign objects to

enter the gap between the upper, left or

right side of the panel and the guide panel.

(Depending upon model)

• Make sure to wring any excess water or

cleaner from the cloth.

• Do not spray water or cleaner directly onto

the monitor screen.

• Make sure to spray just enough of water or

cleaner onto a dry cloth to wipe the screen.

La page charge ...

LG 60UL3E-B Le manuel du propriétaire

LG 60UL3E-B Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents