Samsung HL-T5655W Manuel utilisateur

Register your product at www.samsung.com/global/register

Record your Model and Serial number here for future reference.

▪ Model _______________ ▪ Serial No. _______________

Owner’s Instructions

HL-T5055W

HL-T5655W

DLP TV

BP68-00626E_Eng-1.indd 1 2007-04-13 ｿﾀﾈﾄ 2:05:42

English - 2

A Guide to Digital TV

• What is Digital Television?

Digital television (DTV) is a new way of transmitting high quality video and audio to your TV set. Using DTV, broadcasters can transmit

high definition TV (HDTV) images, Dolby digital surround audio, and new services such as multicasting (transmitting more than one

program on the same TV channel) and datacasting. Several of these services can be combined into a single digital broadcast.

Digital Television Services

• Digital Picture Quality

DTV programs are transmitted in two different formats. The first is Standard Definition Television (SDTV) and the second is High Definition

Television (HDTV).

• SDTV program formats include 480-line interlaced (480i) and 480-line progressive (480p) video. 480i programs are essentially a digital

version of our current analog TV programs, while the 480p format offers improved image detail over 480i. Some 480p programs are

broadcast in widescreen and are comparable to progressive-scan DVD movies in image quality.

• HDTV program formats include 1080-line interlaced (1080i) and 720-line progressive (720p). Both HDTV formats are always broadcast

in widescreen, and offer much higher picture quality than SDTV.

• Dolby Surround Sound

With DTV, you can listen to a variety of Dolby digital audio formats from Dolby Surround 2.0 to Dolby Digital 5.1 surround, using your

home audio system. Many HDTV programs are now broadcast with DD 5.1 soundtracks.

The product unit accompanying this user manual is licensed under certain intellectual property rights of certain third parties. In

particular, this product is licensed under the following US patents:

5,991,715, 5,740,317, 4,972,484, 5,214,678, 5,323,396, 5,539,829, 5,606,618, 5,530,655, 5,777,992, 6,289,308, 5,610,985,

5,481,643, 5,544,247, 5,960,037, 6,023,490, 5,878,080, and under US Published Patent Application No. 2001-44713-A1.

This license is limited to private non-commercial use by end-user consumers for licensed contents. No rights are granted for

commercial use. The license does not cover any product unit other than this product unit and the license does not extend to any

unlicensed product unit or process conforming to ISO/IEC 11172-3 or ISO/IEC 13818-3 used or sold in combination with this

product unit. The license only covers the use of this product unit to encode and/or decode audio files conforming to the ISO/IEC

11172-3 or ISO/IEC 13818-3. No rights are granted under this license for product features or functions that do not conform to the

ISO/IEC 11172-3 or ISO/IEC 13818-3.

U.S.A Only

Other countries

The product unit accompanying this user manual is licensed under certain intellectual property rights of certain third parties.

This license is limited to private non-commercial use by end-user consumers for licensed contents. No rights are granted for

commercial use. The license does not cover any product unit other than this product unit and the license does not extend to any

unlicensed product unit or process conforming to ISO/IEC 11172-3 or ISO/IEC 13818-3 used or sold in combination with this

product unit. The license only covers the use of this product unit to encode and/or decode audio files conforming to the ISO/IEC

11172-3 or ISO/IEC 13818-3. No rights are granted under this license for product features or functions that do not conform to the

ISO/IEC 11172-3 or ISO/IEC 13818-3.

BP68-00626E_Eng-1.indd 2 2007-04-13 ｿﾀﾈﾄ 2:05:42

English - 3

Q&A

1. Is the antenna I use for existing TV reception good enough for DTV?

Over-the-air (OTA) digital TV broadcasting uses the same channels as analog TV and works well with many existing TV antennas.

However, DTV broadcast channel assignments are different than analog channels. You should find out whether your local DTV

broadcasts are on VHF (channels 2-13) or UHF (channels 14-69) to see if you need a different antenna.

If your DTV channels are on UHF and you already get good UHF reception, your present antenna may work fine. The same holds true for

VHF DTV reception. Note that in some markets, both VHF and UHF channels are used for DTV broadcasts.

You can find out the latest DTV channel assignments for your area by browsing selected Internet web sites such as www.titantv.com,

www.10000watts.com, and www.fcc.gov.

2. How difficult is it to receive DTV signals indoors?

This depends on whether your local DTV stations are running full power or not and how close your location is to the transmission tower.

DTV receivers do not require as much signal as analog TV receivers to produce high-quality images and sound.

Once the DTV signal level exceeds a certain threshold at the receiver, the digital video and audio data is decoded at the same quality it

was originally encoded for broadcast.

This is a big advantage for DTV over analog TV - there is no noise, ghosting, static, or scratchy audio.

3. How can I connect an antenna in my townhouse, co-operative apartment, condominium,

or apartment?

The Federal Communications Commission’s OTARD Rule (part of the Telecommunications Act of 1996) allows residents of

condominiums, townhouse, or members of neighborhood associations to put up outside antennas for reception of broadcast TV signals

as long as those antennas are not located in common areas and are no more than 12’ in height.

Residents of rental units (apartments, etc.) are not covered by the OTARD rules and will have to use indoor antennas to receive DTV

broadcasts. It is possible that the landlord of an apartment complex can provide broadcast DTV signals via a master TV antenna system

to each apartment.

4. Can I connect my DTV set-top receiver to my cable TV service?

Cable TV systems use a different method for transmitting digital TV programs that is currently incompatible with broadcast DTV set-top

receivers. So you will still need to use an outdoor or indoor antenna to receive OTA broadcast DTV programs.

The good news is that you won’t have to pay a monthly or per-program charge to watch OTA DTV and HDTV programs. They’re free,

unlike subscription satellite TV or premium cable TV. All you need is an antenna and a DTV set-top receiver to enjoy clear, sharp

widescreen images and high-quality audio.

BP68-00626E_Eng-1.indd 3 2007-04-13 ｿﾀﾈﾄ 2:05:42

English - 4

GENERAL INFORMATION

■ Viewing Position

.........................................................5

■ List of Features

..........................................................5

■ Checking Parts

...........................................................6

■ Viewing the Control Panel

.......................................... 6

■

Viewing the Connection Panel ......................................8

■

Remote Control .............................................................9

■

Installing Batteries in the Remote Control ..................10

CONNECTIONS

■

Connecting VHF and UHF Antennas ..........................10

■

Connecting Cable TV ..................................................11

■

Connecting a VCR ......................................................12

■

Connecting a Camcorder ............................................13

■

Connecting a DVD Player/Set-Top Box ......................13

■

Connecting a DVD Player/Set-Top Box via HDMI ......13

■

Connecting a DVD Player/Set-Top Box via DVI ..........14

■

Connecting a Digital Audio System .............................14

■

Connecting an Ampliﬁer/DVD Home Theater .............15

■

Connecting a PC .........................................................15

OPERATION

■

Turning the TV On and Off ..........................................16

■

Plug & Play Feature ....................................................16

■

Changing Channels ....................................................17

■

Adjusting the Volume ..................................................18

■

Viewing the Display ....................................................18

■

Viewing the Menus .....................................................19

■

Memorizing the Channels ...........................................19

■

Setting Up Your Remote Control .................................21

■

To Select the Source ...................................................26

■

To Edit the Input Source Name ...................................26

PICTURE CONTROL

■

Using Automatic Picture Settings ................................27

■ Making Detailed Picture Settings

..........................28

■

Changing the Screen Size ..........................................29

■

Digital Noise Reduction ..............................................30

■

DNIe (Digital Natural Image engine) ...........................30

■ Setting the Color Gamut

.........................................31

■

Selecting the Film Mode .............................................31

■

Setting the Blue Screen Mode ....................................32

■ Setting the HDMI Black Level

................................32

■

Freezing the Picture ....................................................32

SOUND CONTROL

■

Using Automatic Sound Settings ................................33

■

Customizing the Sound ...............................................33

■

Setting up DNSe (Digital Natural Sound engine) ........34

■

Choosing a Multi-Channel Sound (MTS) Track - Digital

.......34

■

Choosing a Multi-Channel Sound (MTS) Track - Analog

......35

■

Automatic Volume Control ..........................................35

■

Selecting the Internal Mute .........................................36

CHANNEL CONTROL

■

Clearing Scrambled Channels - Digital .......................37

■

Adding and Erasing Channels ....................................37

■

Setting Your Favorite Channels ..................................38

■

Viewing the Channel Lists ..........................................39

■

Setting the Default Channel List Mode .......................40

■

Labeling Channels - Analog ........................................40

■

Fine Tuning Analog Channels - Analog .......................41

■

Checking the Digital-Signal Strength - Digital .............41

■

LNA (Low Noise Ampliﬁer) ..........................................42

PC DISPLAY

■

Using Your TV as a Computer (PC) Display ...............42

■

Display Modes ............................................................42

■

Setting up the TV with your PC ...................................43

■ Changing the Picture Size (PC Mode)

.................45

■ Setting the Home Theater PC

...............................45

FUNCTION DESCRIPTION

■

Selecting a Menu Language .......................................46

■

Setting the Time ..........................................................46

■

Using the Game Mode ................................................48

■

Using the V-Chip .........................................................49

■

Viewing Closed Captions

(On-Screen Text Messages) - Analog .........................

52

■

Viewing Closed Captions

(On-Screen Text Messages) - Digital ..........................

53

■

Menu Transparency Level ..........................................54

■ Adjusting the Melody Sound

..................................54

■

Setting the Function Help ...........................................54

■ Upgrading the Software

..........................................55

APPENDIX

■

Troubleshooting ..........................................................56

■

Replacing the Lamp ....................................................57

■

Cleaning and Maintaining Your TV .............................58

■

Using Your TV in Another Country ..............................58

■

Speciﬁcations ..............................................................59

Symbols

☛ ➢

Press

Important

Note

One-Touch

Button

Contents

BP68-00626E_Eng-1.indd 4 2007-04-13 ｿﾀﾈﾄ 2:05:43

English - 5

➢ When installing the product, make sure to keep it away

from the wall (more than 10cm / 4inches) for ventilation

purposes.

Poor ventilation may cause an increase in the internal

temperature of the product, resulting in a shortened

component life and degraded performance.

List of Features

Your TV was designed and engineered using the latest technology. It is a full-featured, high-performance unit that exceeds

industry standards. In addition, it has these special features:

• Easy-to-operate remote control

• Easy-to-use on-screen menu system you can access from front panel or remote control

• Automatic timer to turn the TV on and off at any time you choose

• Adjustable picture and sound settings and the ability to memorize your favorite settings

• Automatic channel tuning for up to 181 channels

• A special filter to reduce or eliminate reception problems

• Fine tuning control for the sharpest picture possible

• A built-in multi-channel sound decoder for stereo and bilingual listening

• Built-in, dual channel speakers

• A special sleep timer

• Widescreen TV with adjustable image size

• Life-like clear images provided by DNle technology

• Color Weakness Enhancement Feature

• Digital Input jack

• Digital Audio Output (OPTICAL) jack

• Theater Game Mode

General Information

Viewing Position

To optimize your viewing comfort, please follow the guidelines below for viewing distance.

If viewing for an extended period of time, sit as far back from the screen as possible.

BP68-00626E_Eng-1.indd 5 2007-04-13 ｿﾀﾈﾄ 2:05:43

English - 6

Checking Parts

Owner’s Instructions Remote Control

(BP59-00123A)/

AAA Batteries

Warranty Card/

Registration Card/

Safety Guide Manual/

Quick Guide Manual

Power Cord

(3903-000144)

Sold Separately

Replacement Lamp

(BP96-01472A)

For purchasing a replacement lamp,

ask at a nearby service center.

• Use authorized lamps only.

The company cannot guarantee

the quality of the product if an

unauthorized lamp is used.

S-Video Cable Antenna Cable

Component Cables

Audio Cables Video Cables

D-Sub Cable PC Audio Cable HDMI Cable HDMI/DVI Cable Optical Cable

3.5 mm Stereo

mini-plug/2RCA

Cable

Viewing the Control Panel

Buttons on the Lower Part of the Panel

The buttons on the lower panel control your TV’s basic features, including the on-screen menu.

To use the more advanced features, you must use the remote control.

Continued...

➢ The product color and shape may vary depending on the model.

BP68-00626E_Eng-1.indd 6 2007-04-13 ｿﾀﾈﾄ 2:05:49

English - 7

1

POWER

Press to turn the TV on and off.

2

Remote Control Sensor

Aim the remote control towards this spot on the TV.

3

Indicator Lights

Blinks and turns off when the power is on and lights up in

stand-by mode.

4

SOURCE

Toggles between all the available input sources

(TV, AV1, AV2, AV3, S-Video1, S-Video2, S-Video3

Component1, Component2, PC, HDMI1/DVI, or HDMI2).

5

MENU

Press to see an on-screen menu of your TV’s features.

6

+ VOL –

Press to increase or decrease the volume.

In the on-screen menu, use the + VOL – buttons as you

would use the ◄ and ► buttons on the remote control.

7

CH

Press to change channels.

In the on-screen menu, use the CH buttons as you

would use the ▲ and ▼ buttons on the remote control.

8

(ENTER)

Press to confirm a selection.

Indicator Light Key

( : On, : Blinking, : Off)

STAND BY/TEMP

TIMER LAMP Indication

Standby state.

The picture will automatically appear in about 15 seconds.

Auto Timer ON/OFF has been set and the set will automatically be turned on in about 15 seconds.

A cooling fan inside the set is not operating normally.

Lamp cover on the rear of the set is not properly shut.

Check if the ventilation hole on the rear of the set is blocked, because if the inner temperature is

too high, the power will shut off.

Lamp may be defective. Please contact a certified technician.

➢

◆

It takes about 30 seconds for the TV to warm up, so normal brightness may not appear immediately.

◆

The TV has a fan to keep the inside lamp from overheating. You’ll occasionally hear it working.

◆

You can use the channel selection buttons to switch on the TV when it is in standby mode depending on the model.

◆

When using the on-screen menu the volume adjustment and channel selection buttons have the same function as the ▲/▼/◄/►

buttons on the remote control.

◆

If the remote control no longer works or you have lost it, you can use controls on the panel of the TV.

BP68-00626E_Eng-1.indd 7 2007-04-13 ｿﾀﾈﾄ 2:05:54

English - 8

Viewing the Connection Panel

Rear Panel Jacks

Use the rear panel jacks to connect A/V components that will be connected continuously, such as VCR or DVD players.

For more information on connecting equipment, see pages 12-15.

➢ The product color and shape may vary depending on the model.

1

ANT 1 IN(CABLE)/ANT 2 IN(AIR)

75Ω Coaxial connector for Air/Cable Network.

2

SERVICE

This jack is for service only.

3

DIGITAL AUDIO OUT (OPTICAL)

Connect to a Digital Audio component.

4

DVI IN (AUDIO-L/R)

Connect to the DVI audio output jack of an external device.

5

S-VIDEO (AV IN 1, 2)

Video input for external devices with an

S-Video output, such as a Camcorder or VCR.

6

VIDEO/AUDIO-L/R (AV IN 1, 2)

Video input for external devices, such as a Camcorder or

VCR.

7

VIDEO/AUDIO OUT (L/R)

Video/Audio outputs for external devices.

Video output is not avaiable RF(Digital)/Component/PC/HDMI.

8

COMPONENT IN 1, 2

Video (Y/PB/PR) and audio (L-AUDIO-R) Component inputs.

9

PC IN

Connect to the video output jack on your PC.

0

PC AUDIO IN

Connect to the audio output jack on your PC.

!

HDMI IN 2

Connect to the HDMI jack of a device with HDMI output.

(Not compatible with PC)

@

HDMI 1/DVI IN

Connect to the HDMI jack of a device with HDMI output.

This input can also be used as a DVI connection with separate

analog audio inputs. An optional HDMI/DVI cable will be

necessary to make this connection.

When using an optional HDMI/DVI adapter, the DVI analog

audio inputs on your TV allow you to receive left and right

audio from your DVI device.

#

SERVICE 2

This jack is for software upgrade.

$

POWER IN

Connect the supplied power cord.

Side Panel Jacks

Use the right side panel jacks to connect a component that is used only occasionally (a camcorder or video game, for example).

The product color and shape may vary depending on the model.

1

S-VIDEO

Connect an S-Video signal from an S-VHS VCR or DVD player.

2

VIDEO

Connect the video signal from a camcorder or video game.

3

AUDIO (L/R)

Connect the audio signal from a camcorder or video game.

BP68-00626E_Eng-1.indd 8 2007-04-13 ｿﾀﾈﾄ 2:05:55

English - 9

1

POWER

Turns the TV on and off.

2

Numeric Buttons

Press to directly select a channel.

3

–

Press to select additional channels

being broadcast by the same station.

For example, to select channel “54-3”,

press “54”, then press “–” and “3”.

4

CH LIST

Used to display Channel Lists on the

screen.

5

ANTENNA

Press to select “Air” or “Cable”.

6

VOL +, VOL –

Press to increase or decrease the

volume.

7

MUTE

Press to temporarily cut off the sound.

8

MENU

Displays the main on-screen menu.

9

RETURN

Returns to the previous menu.

0

S.MODE

Press to select the sound mode.

!

P.MODE

Press to select the picture mode.

@

SLEEP

Press to select a preset time interval

for automatic shut off.

#

GAME

Press to select various Game settings.

$

MTS

Press to choose Stereo, Mono or

Separate Audio Program (SAP

broadcast).

%

SET

Sets the remote to control your TV,

VCR, Cable, DVD, or Set-Top Box.

^

TV, DVD, STB, CABLE, VCR

Press to operate your TV, DVD, STB,

CABLE (box), or VCR.

&

SOURCE

Press to display all of the available

video sources.

*

Press to backlight the VOL, CH, and

the active source button (TV, DVD,

CABLE, STB, VCR) on the remote

control.

(

PRE-CH

Tunes to the previous channel.

)

FAV.CH

Press to switch to your favorite

channels.

a

HDMI

Selects the HDMI mode directly.

b

VCR/DVD Functions

- Rewind

- Stop

- Play/Pause

- Fast Forward

c

CH , CH

Press to change channels.

d

EXIT

Press to exit from the menu.

e

UP▲/DOWN▼/LEFT◄/RIGHT►/

ENTER

Use to select on-screen menu items

and change menu values.

f

INFO

Press to display information on the TV

screen.

g

CAPTION

Controls the caption decoder.

h

STILL

Press to stop the action during a

particular scene.

Press again to resume normal video.

i

Color buttons

Press to add or delete channels and to

store channels to the favorite channel

list in the “Channel List” menu.

(Refer to pages 37~39)

j

P.SIZE

Press to change the screen size.

k

ADD/DEL

Use to store and delete channels to/

from memory.

l

DNSe

DNSe enhances the sound quality,

automatically controls output, and

prevents sound distortion.

Press this button to set it On or Off.

(Refer to page 34)

m

RESET

When your remote control does not

work, change the batteries and press

the RESET button for 2-3 seconds

before use.

➢

This is a special remote control for the visually impaired person, and has Braille

points on the POWER, Channel, Volume, STOP, and PLAY/PAUSE buttons.

➢

The performance of the remote control may be affected by bright light.

Remote Control

You can use the remote control up to a distance of about 23 feet from the TV. When using the remote, always point it directly at

the TV. You can also use your remote control to operate your VCR, Cable box, DVD Player, or Set-Top Box.

BP68-00626E_Eng-1.indd 9 2007-04-13 ｿﾀﾈﾄ 2:05:59

English - 10

Installing Batteries in the Remote Control

1 Lift the cover at the back of the remote control upward as shown in the figure.

2 Install two AAA size batteries.

➢

Make sure to match the “+” and “–” ends of the batteries with the diagram inside the

compartment.

➢

Do not mix battery types, i.e. alkaline and manganese.

3 Close the cover as shown in the figure.

➢

Remove the batteries and store them in a cool and dry place if you won’t be using the remote

control for a long time. The remote control can be used up to about 23 feet from the TV.

(Assuming typical TV usage, the batteries last for about one year.)

➢

If the remote control doesn’t work, check the following

1. Is the TV power on?

2. Are the plus and minus ends of the batteries reversed?

3. Are the batteries drained?

4. Is there a power cut, or is the power cord unplugged?

5. Is there a special fluorescent light or a neon sign nearby?

Connecting VHF and UHF Antennas

If your antenna has a set of leads that look like this, see “Antennas with 300 Ω Flat Twin

Leads” below.

If your antenna has one lead that looks like this, see “Antennas with 75 Ω Round Leads”.

If you have two antennas, see “Separate VHF and UHF Antennas”.

Antennas with 300 Ω Flat Twin Leads

If you are using an off-air antenna (such as a roof antenna or “rabbit ears”) that has 300 Ω

twin flat leads, follow the directions below.

1 Place the wires from the twin leads under the screws on a 300-75 Ω adapter (not supplied).

Use a screwdriver to tighten the screws.

2 Plug the adaptor into the ANT 1 IN(CABLE) or ANT 2 IN(AIR) terminal on the rear of the TV.

Antennas with 75 Ω Round Leads

1

Plug the antenna lead into the ANT 1 IN(CABLE) or ANT 2 IN(AIR) terminal on the

rear

of the TV.

Separate VHF and UHF Antennas

If you have two separate antennas for your TV (one VHF and one UHF), you must combine the

two antenna signals before connecting the antennas to the TV. This procedure requires an

optional combiner-adaptor (available at most electronics shops).

1 Connect both antenna leads to the combiner.

2 Plug the combiner into the ANT 1 IN(CABLE) or ANT 2 IN(AIR) terminal on the bottom of the rear

panel.

BP68-00626E_Eng-1.indd 10 2007-04-13 ｿﾀﾈﾄ 2:06:02

English - 11

Connecting Cable TV

To connect to a cable TV system, follow the instructions below.

Cable without a Cable Box

1 Plug the incoming cable into the ANT 1 IN(CABLE) terminal on the rear of the TV.

➢

Because this TV is cable-ready, you do not need a cable box to view unscrambled cable

channels.

Connecting to a Cable Box that Descrambles All Channels

1 Find the cable that is connected to the ANT OUT terminal on your cable box.

➢

This terminal might be labeled “ANT OUT”, “VHF OUT” or simply, “OUT”.

2 Connect the other end of this cable to the ANT 1 IN(CABLE) terminal on the rear of the TV.

Connecting to a Cable Box that Descrambles Some Channels

If your cable box descrambles only some channels(such as premium channels), follow the instructions below. You will need a

two-way splitter, an RF (A/B) switch, and four lengths of Antenna cable. (These items are available at most electronics stores.)

1 Find and disconnect the cable that is connected

to the ANT IN terminal on your cable box.

➢

This terminal might be labeled “ANT IN”, “VHF IN”

or simply, “IN”.

2 Connect this cable to a two-way splitter.

3 Connect an Antenna cable between an OUTPUT

terminal on the splitter and the IN terminal on the

cable box.

4 Connect an Antenna cable between the ANT OUT

terminal on the cable box and the B-IN terminal

on the RF (A/B) switch.

5 Connect another cable between the other OUT

terminal on the splitter and the A-IN terminal on

the RF (A/B) switch.

6 Connect the last Antenna cable between the OUT

terminal on the RF (A/B) switch and the ANT IN 1

(CABLE) terminal on the rear of the TV.

After you have made this connection, set the

A/B switch to the “A” position for normal viewing.

Set the A/B switch to the “B” position to view

scrambled channels. (When you set the A/B

switch to “B”, you will need to tune your TV to

the cable box’s output channel, which is usually

channel 3 or 4.)

ANT OUT

ANT IN

Splitter

Incoming

cable

Splitter

Cable Box

Incoming

cable

Splitter

Cable Box

RF (A/B)

Switch

Incoming

cable

ANT IN

Incoming

cable

Splitter

Cable Box

RF (A/B)

Switch

TV Rear Panel

Splitter

Incoming

cable

RF (A/B)

Switch

Cable Box

BP68-00626E_Eng-1.indd 11 2007-04-13 ｿﾀﾈﾄ 2:06:06

English - 12

S-Video Connection

Your Samsung TV can be connected to the S-Video jack of a VCR.

(This connection delivers a better picture when compared to the regular Video connection above.)

1 To begin, follow steps 1–3 in the

previous section to connect the

antenna or cable to your VCR and

your TV.

2 Connect an S-Video Cable between

the S-VIDEO OUT jack on the VCR

and the AV IN 1 [S-VIDEO] (or AV

IN 2 [S-VIDEO]) jack on the TV.

3 Connect Audio Cables between the

AUDIO OUT jacks on the VCR and

the AV IN 1 [L-AUDIO-R] (or AV IN 2

[L-AUDIO-R]) jacks on the TV.

➢

Each S-VHS VCR has a different panel configuration.

➢

When connecting a VCR, match the color of the connection terminal to the cable.

➢

Some games may be displayed with a cut off picture when the TV is connected to a game player.

Connecting a VCR

Video Connection

These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the

instructions on pages 10~11). Skip step 1 if you have not yet connected to an antenna or a cable system.

1 Unplug the cable or antenna from the

rear of the TV

2 Connect the cable or antenna to the

ANT IN terminal on the back of the

VCR.

3 Connect an Antenna Cable between

the ANT OUT terminal on the VCR

and the ANT 1 IN(CABLE) or ANT 2

IN(AIR) terminal on the TV.

4 Connect a Video Cable between the

VIDEO OUT jack on the VCR and

the AV IN 1 [VIDEO] (or AV

IN 2 [VIDEO]) jack on the TV.

5 Connect Audio Cables between the

AUDIO OUT jacks on the VCR and

the AV IN 1 [L-AUDIO-R] (or AV

IN 2 L-AUDIO-R) jacks on the TV.

➢

If you have a “mono” (non-stereo)

VCR, use a Y-connector (not

supplied) to hook up to the right

and left audio input jacks of the TV.

If your VCR is stereo, you must

connect two cables.

➢

Each VCR has a different panel configuration.

➢

When connecting a VCR, match the color of the connection terminal to the cable.

2

TV Rear Panel

VCR

Audio Cable(Not supplied)5

Video Cable(Not supplied)4

Antenna cable(Not supplied)3

TV Rear Panel

VCR

Audio Cable

(Not supplied)

5

S-Video Cable(Not supplied)4

Antenna cable(Not supplied)3

BP68-00626E_Eng-1.indd 12 2007-04-13 ｿﾀﾈﾄ 2:06:10

English - 13

Connecting a Camcorder

The side panel jacks on your TV make it easy to connect a camcorder to your TV.

They allow you to view the camcorder tapes without using a VCR.

1 Connect a Video Cable or S-Video

Cable between the AV IN 3 [VIDEO]

or [S-Video] jack on the TV and the

VIDEO OUT jack on the camcorder.

2 Connect Audio Cables between the

AV IN 3 [L-AUDIO-R] jacks on the

TV and the AUDIO OUT jacks on the

camcorder.

➢

Each Camcorder has a different panel configuration.

➢

When connecting a Camcorder, match the color of the connection terminal to the cable.

Connecting a DVD Player/Set-Top Box via HDMI

This connection can only be made if there is an HDMI Output jack on the external device.

This connection will provide the highest quality picture.

1.

Connect an HDMI Cable between the

HDMI IN 2

on the TV and the HDMI

OUT on the DVD Player/

Set-Top Box.

What is HDMI?

● HDMI, or high-definition multimedia interface, is an interface that enables the transmission of digital audio and video signals using a

single cable.

● “Multimedia interface” is a more accurate name for it especially because it allows multiple channels of digital audio (5.1 channels).

The difference between HDMI and DVI is that the HDMI device is smaller in size, has the HDCP (High Bandwidth Digital Copy

Protection) coding feature installed, and supports multi-channel digital audio.

➢

Each DVD Player/Set-Top box has a different panel configuration.

➢

When connecting a DVD Player/Set-Top box, match the color of the connection terminal to the cable.

➢

When connecting via HDMI, you do not need to connect Audio Cables. You only need to connect Audio cables when connecting via

HDMI/DVI.

Connecting a DVD Player/Set-Top Box

The rear panel jacks on your TV make it easy to connect a DVD Player/Set-Top Box.

1 Connect Component Cables

between the COMPONENT IN 1

[Y, PB, PR] (or COMPONENT IN 2

[Y, PB, PR]) jacks on the TV and the

COMPONENT OUT [Y, PB, PR] jacks

on the DVD Player/Set-Top Box.

2 Connect Audio Cables between the

COMPONENT IN 1 [L-AUDIO-R] (or

COMPONENT IN 2 [L-AUDIO-R])

jacks on the TV and the AUDIO OUT

jacks on the DVD Player/

Set-Top Box.

➢

Component video separates the video into Y (Luminance (brightness)), PB (Blue) and PR (Red) for enhanced video quality.

Be sure to match the component video and audio connections

.

For example, if connecting the video cable to COMPONENT IN 1, connect the audio cable to COMPONENT IN 1 also.

➢

Each DVD Player/Set-Top box has a different panel configuration.

➢

When connecting a DVD Player/Set-Top box, match the color of the connection terminal to the cable.

TV Side Panel

Camcorder

S-Video Cable(Not supplied)

1

Video Cable(Not supplied)

1

Audio Cable(Not supplied)

2

or

TV Rear Panel

DVD Player/Set-Top Box

Audio Cable(Not supplied)

2

Component Cable(Not supplied)

1

HDMI Cable (Not supplied)

1

DVD Player / Set-Top Box

TV Rear Panel

BP68-00626E_Eng-1.indd 13 2007-04-13 ｿﾀﾈﾄ 2:06:16

English - 14

Connecting a DVD Player/Set-Top Box via DVI

This connection can only be made if there is a DVI Output jack on the external device.

1 Connect a HDMI/DVI Cable or

DVI-HDMI Adapter between the

HDMI 1/DVI IN jack on the TV and

the DVI jack on the DVD Player/

Set-Top Box.

2 Connect Audio Cables between the

DVI IN [L-AUDIO-R] jack on the TV

and the AUDIO OUT jacks on the

DVD Player/Set-Top Box.

➢

Each DVD Player/Set-Top box has a different panel configuration.

➢

When connecting a DVD Player/Set-Top box, match the color of the connection terminal to the cable.

➢

When using an HDMI/DVI cable connection, you must connect to the HDMI 1/DVI IN terminal on the TV.

Connecting a Digital Audio System

The rear panel jacks on your TV make it easy to connect a Digital Audio System to your TV.

➢

Each Digital Audio System has a different panel configuration.

1 Connect an Optical Cable between

the DIGITAL AUDIO OUT (OPTICAL)

jack on the TV and the Digital Audio

Input jack on the Digital Audio

System.

When a Digital Audio System is

connected to the DIGITAL AUDIO

OUT (OPTICAL) terminal: Decrease

the gain (volume) of the TV, and

adjust the volume level with the

system’s volume control.

➢

5.1CH audio is possible when the TV

is connected to an external device

supporting 5.1CH.

What is OPTICAL?

 Converts the electric signal into an optical light signal, and transmits it through glass fibers. S/PDIF is a transmission system of digital

audio in the form of a light wave that uses a glass conductor.

TV Rear Panel

DVD Player/Set-Top Box

Audio Cable(Not supplied)

2

HDMI/DVI Cable(Not supplied)

1

TV Rear Panel

Optical Cable (Not supplied)

1

Digital Audio System

BP68-00626E_Eng-1.indd 14 2007-04-13 ｿﾀﾈﾄ 2:06:22

English - 15

Connecting a PC

Using the D-Sub Cable

1 Connect a D-Sub Cable between the

PC IN [PC] jack on the TV and the

PC output jack on your computer.

2 Connect a PC Audio Cable between

the PC IN [AUDIO] jack on the TV

and the Audio Out jack of the sound

card on your computer.

Using the HDMI/DVI Cable

1 Connect a HDMI/DVI Cable between

the HDMI1/DVI jack on the TV and

the PC output jack on your computer.

2 Connect a 3.5 mm Stereo mini-plug/

2RCA Cable between the DVI IN jack

on the TV and the Audio Out jack of

the sound card on your computer.

➢

Each PC has a different panel configuration.

➢

When connecting a PC, match the color of the connection terminal to the cable.

Connecting an Amplifier/DVD Home Theater

1 Connect Audio Cables between the

AUDIO OUT [L-AUDIO-R] on the TV

and AUDIO IN [L-AUDIO-R] on the

Amplifier/DVD Home Theater.

When an audio amplifier is

connected to the “AUDIO OUT

[L-AUDIO-R ]” terminals: Decrease

the gain (volume) of the TV, and

adjust the volume level with the

Amplifier’s volume control.

➢

Each Amplifier/DVD Home Theater has a different panel configuration.

➢

When connecting an Amplifier/DVD Home Theater, match the color of the connection terminal to the cable.

AV OUT L-AUDIO-R RF (Digital/Analog), AV, S-Video, Component, HDMI Sound is output

DIGITAL AUDIO OUT (OPTICAL)

RF (Digital/Analog), AV, S-Video, Component

Sound is output

HDMI Sound is not output

➢

If you want to play movies by connecting DVD Player or Set-Top Box to the COMPONENT IN jacks on the TV,

connect the Optical OUT jack on the DVD Player or Set-Top Box to an Amplifier or DVD Home Theater.

TV Rear Panel

Audio Cable (Not supplied)

1

Amplifier/

DVD Home Theater

TV Rear Panel

PC Audio Cable (Not supplied)

2

D-Sub Cable (Not supplied)

1

TV Rear Panel

Using the D-Sub Cable

Using the HDMI/DVI Cable

PC

HDMI/DVI Cable (Not supplied)

1

3.5 mm Stereo mini-plug/2RCA Cable

(Not supplied)

2

BP68-00626E_Eng-1.indd 15 2007-04-13 ｿﾀﾈﾄ 2:06:29

English - 16

Operation

Turning the TV On and Off

Press the POWER button on the remote control.

You can also use the

(Power) button on the front panel.

Plug & Play Feature

When the TV is initially powered on, basic settings proceed automatically and

subsequently:

1 Press the POWER button on the remote control.

The message Menu language, Shop Mode, Channels and Time will be set.

is displayed.

2 Press the ENTER button to enter the language.

Press the ▲ or ▼ button to select language, then press the ENTER button.

The message Select Home Mode when installing this TV at home. is automatically

displayed.

3 Press the ◄ or ► button to select Shop or Home, then press the ENTER button.

➢

The default selection is Home.

➢

We recommend setting the TV to Home mode for the best picture in your home

environment.

➢

Shop mode is only intended for use in retail environments.

➢

If the unit is accidentally set to Shop mode and you want to return to Dynamic (Home)

mode, press the Volume button and then hold down the MENU button for five seconds

on the TV panel.

4 Press the ▲ or ▼ button to memorize the channels of the selected connection.

Press the ENTER button to select Start.

➢

If the antenna is connected to ANT 1 IN(CABLE), select Cable and if it is connected to

ANT 2 IN(AIR), select Air.

➢

If both ANT 1 IN(CABLE) and ANT 2 IN(AIR) are connected, select the Air + Cable.

➢

In Cable mode, you can select the correct signal source among STD, HRC, and IRC by

pressing the ◄ button, then press the ▲ or ▼ button.

Press the ► button to select Start, then press the ENTER button.

Contact your local cable company to identify the type of cable system that exists in your

particular area.

5 The TV will begin memorizing all of the available channels. After all the available channels

are stored, the Auto program menu reappears.

Press the ENTER button when channel memorization is complete. Clock Mode menu is

automatically displayed.

➢

To stop the search before it has finished, press the ENTER button with stop selected.

6 Press the ENTER button.

Press the ▲ or ▼ button to select Manual for setting the current time manually, then press

the ENTER button. The message Enter the current date and time. is displayed.

➢

If you select Auto, Set to daylight saving time. is displayed, then go to step 9.

(If you want to set the time automatically, skip to step 9.)

7 Press the ◄ or ► button to move to Month, Day, Year, Hour, Minute, or am/pm.

Set the date and time you want by pressing the ▲ or ▼ button, then press the ENTER

button.

➢

You can set the Month, Day, Year, Hour, and Minute directly by pressing the number

buttons on the remote control.

8 The message Enjoy your watching. is displayed.

When you have finished, press the ENTER button.

➢

Even if the ENTER button is not pressed, the message will automatically disappear after

several seconds.

Continued...

Plug & Play

Auto Program in Progress.

15%

Air 16

Enter

Stop

Menu language, Shop Mode,

Channels and Time will be set.

Start

Plug & Play

Enter the current date and time.

Month Day Year

--

----

Hour Minute am/pm

--

-- --

--

Adjust

Enter

Skip

Move

Enjoy your watching.

OK

Plug & Play

Select the antennas to memorize.

Air

Cable

Air + Cable

Start

Move

Enter

Skip

Plug & Play

Select the language of the OSD.

Language

English

Español

Français

Move

Enter Skip

Plug & Play

Select Home Mode when installing this TV at

home.

Shop Home

Move

Enter

Skip

Plug & Play

Set the Clock Mode.

Clock Mode

Move

Enter

Skip

Auto

Manual

Plug & Play

Enter

Skip

Move

Selects a cable signal type for your

location.

Analog

Start

STD

HRC

IRC

Digital

STD

HRC

IRC

Skip

BP68-00626E_Eng-1.indd 16 2007-04-13 ｿﾀﾈﾄ 2:06:40

English - 17

Setting the Clock Automatically

9 Press the ENTER button.

Press the ▲ or ▼ button to select Off or On, then the ENTER button.

The message Select the time zone where you are located. is automatically displayed.

10 Press the ▲ or ▼ button to highlight the time zone for your local area (and to move the

highlight to the appropriate time zone on the map of the United States).

Press the ENTER button.

If clock is not automatically set, see pages 46~47 to set the clock.

11 The message

Enjoy your watching. is displayed.

When you have finished, press the ENTER button.

➢

Even if the ENTER button is not pressed, the message will automatically disappear after

several seconds.

If you want to reset this feature...

1 Press the MENU button to display the menu.

Press the ▲ or ▼ button to select Setup, then press the ENTER button.

2 Press the ENTER button to select Plug & Play.

For further details on setting up options, refer to the top the pages 16~17.

➢

The Plug & Play feature is only available in the TV and DTV mode.

Changing Channels

Using the Channel Buttons

Press the CH or CH button to change channels.

➢

When you press the CH or CH button, the TV changes channels in sequence.

You will see all the channels that the TV has memorized. (The TV must have memorized at

least three channels). You will not see channels that were either erased or not memorized.

See page 19 to memorize channels.

Using the Number Buttons

Use the number buttons to quickly tune to any channel.

Press the number buttons to go directly to a channel.

For example, to select channel 27, press 2, then 7.

The TV will change channels when you press the second number.

Continued...

Enjoy your watching.

OK

Plug & Play

Set to daylight saving time.

DST

Off

On

Move

Enter

Skip

Plug & Play

Select the time zone where you are located.

Newfoundland

Atlantic

Eastern

Central

Mountain

Pacific

Alaska

Hawaii

Move

Enter

Skip

Menu language, Shop Mode,

Channels and Time will be set.

Start

Setup

Plug & Play

►

Language : English

►

Time

►

Game Mode : Off

►

V-Chip

►

Caption

►

Menu Transparency

: Medium

►

▼

More

Move

Enter

Return

BP68-00626E_Eng-1.indd 17 2007-04-13 ｿﾀﾈﾄ 2:06:46

English - 18

Using the “

-

” Button

The

-

button is used to select stations that broadcast a digital signal.

For example, for Channel 7-1, press 7, then -, and then 1.

➢

HD indicates the TV is receiving a Digital High Definition signal.

SD indicates the TV is receiving a Standard Definition signal.

➢

For quick channel change, press the number buttons, then press the ENTER button.

Using the PRE-CH Button to select the Previous Channel

Press the PRE-CH button.

The TV will switch to the last channel viewed.

➢

To quickly switch between two channels that are far apart, tune to one channel, then use

the number button to select the second channel. Then use the PRE-CH button to quickly

alternate between them.

Adjusting the Volume

Press the VOL + or VOL – button to increase or decrease the volume.

Using the MUTE Button

At any time, you can cut off the sound using the MUTE button.

1 Press the MUTE button and the sound cuts off.

The word Mute will appear in the lower-left corner of the screen.

2 To turn mute off, press the MUTE button again, or simply press the VOL + or VOL – button.

Viewing the Display

The display identifies the current channel and the status of certain audio-video settings.

Press the INFO button on the remote control.

The TV will display the channel, the type of sound, and the status of certain picture and sound

settings.

Press the INFO button once more or wait approximately 10 seconds and it disappears

automatically.

Air 28

Mono

Picture Mode : Dynamic

Sound Mode : Custom

MTS : Stereo

Caption : Off

V-Chip : Off

12 : 00 am

BP68-00626E_Eng-1.indd 18 2007-04-13 ｿﾀﾈﾄ 2:06:49

English - 19

Memorizing the Channels

Your TV can memorize and store all of the available channels for both “off-air” (air) and cable channels. After the available

channels are memorized, use the CH and CH button to scan through the channels. This eliminates the need to change

channels by entering the channel digits. There are three steps for memorizing channels: selecting a broadcast source,

memorizing the channels (automatic) and adding or deleting channels (manual).

Selecting the Video Signal-source

Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the

TV(i.e. an air or a cable system).

1 Press the MENU button to display the menu.

Press the ▲ or ▼ button to select Channel, then press the ENTER button.

2 Press the ENTER button select Antenna.

Press the ▲ or ▼ button to select Air or Cable, then press the ENTER button.

Press the MENU button.

Storing Channels in Memory (Automatic Method)

1 Press the MENU button to display the menu.

Press the ▲ or ▼ button to select Channel, then press the ENTER button.

2 Press the ▲ or ▼ button to select Auto Program, then press the ENTER button.

3 Press the ▲ or ▼ button to select the antenna connection, then press the ENTER button.

➢

Air : “Air” antenna signal.

Cable : “Cable” antenna signal.

Air+Cable : “Air” and “Cable” antenna signals.

➢

If the antenna is connected to ANT 1 IN(CABLE), select Cable and if it is connected to

ANT 2 IN(AIR), select Air.

➢

If both ANT 1 IN and ANT 2 IN are connected, select the Air + Cable.

➢

If you selected Air, then go to step 5.

Continued...

Viewing the Menus

1 With the power on, press the MENU button.

The main menu appears on the screen. Its left side has five icons:

Picture, Sound, Channel, Setup, Input.

2 Use the ▲ or ▼ button to select one of the five icons.

Then press the ENTER button to access the icon’s sub-menu.

3 Press the EXIT button to exit.

➢

It takes about one minute until the on-screen menu disappears.

Channel

Antenna : Air

Auto Program

Clear Scrambled Channel

Channel List

Name

Fine Tune

Signal Strength

LNA : On

Air

Cable

Move

Enter

Channel

Antenna : Air

►

Auto Program

►

Clear Scrambled Channel

►

Channel List

►

Name

►

Fine Tune

►

Signal Strength

►

LNA : On

►

Move

Enter

Return

Auto Program

Selects the antennas to memorize.

Air

Cable

Air + Cable

Start

Move

Enter

Channel

Antenna : Air

►

Auto Program

►

Clear Scrambled Channel

►

Channel List

►

Name

►

Fine Tune

►

Signal Strength

►

LNA : On

►

Move

Enter

Return

Source List : TV

►

Edit Name

►

Input

Move

Enter Exit

BP68-00626E_Eng-1.indd 19 2007-04-13 ｿﾀﾈﾄ 2:07:01

English - 20

4 Press the ▲ or ▼ button to select Analog or Digital, then press the ENTER button.

You can select the correct signal source among STD, HRC and IRC by pressing the

▲ or ▼ button, then press the ENTER button.

To memorize the channels, press the ▲ or ▼ button to select Start, then press the

ENTER button.

➢

If you have Digital cable TV, select the signal source for both Analog and Digital.

➢

STD, HRC, and IRC identify various types of cable TV systems. Contact your local

cable company to identify the type of cable system that exists in your particular area.

At this point the signal source has been selected.

5 The TV begins memorizing all available stations.

When pressing the ENTER button during a storing process, the message Stop Auto

Program? will be displayed. Select Yes by pressing the ◄ or ► button.

Press the EXIT button to exit.

➢

The TV must be connected to an antenna/cable in order to receive digital TV signals.

Even if a particular channel is deleted from the memory, you can always tune to that

channel directly by using the number buttons on the remote control.

➢

• All available DTV and analog channels are automatically stored in memory.

• It takes approximately 3 to 10 minutes to memorize channels.

Auto Program

Auto Program in Progress.

15%

Air 16

Enter

Stop

Auto Program

Stop Auto Program?

15%

Enter

Yes No

Move

Auto Program

Selects a cable signal type for your location.

Analog

Start

STD

HRC

IRC

Digital

STD

HRC

IRC

Enter

Return

Move

Return

BP68-00626E_Eng-1.indd 20 2007-04-13 ｿﾀﾈﾄ 2:07:04

La page charge ...

Samsung HL-T5655W Manuel utilisateur

Ce manuel convient également à

Samsung HL-T5655W Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents