Sanyo CLT-1554 Manuel utilisateur

Catégorie
Téléviseurs LCD
Taper
Manuel utilisateur

Ce manuel convient également à

AS
Model No.:
No. de Modelo:
N
o
de modele:
Printed in U.S.A. SMC, August 2005
Impreso en U.S.A. SMC, Agosto 2005
Imprimé aux É.-U. SMC, août 2005
Part No. / No. de Parte /
No de pièce :
1AA6P1P4697C–
Service Code/Código de Servicio/
Code de service : 610 318 4272
SStteerreeoo LLCCDD TTVV
Owner’s Manual
Manual Del Propietario
Manuel d’instructions
“Read this manual before assembling (or
using) this product.
ENGLISH
Table of Contents . . . . . . . . . . . . . . . . . 3
ESPAÑOL
Contenido . . . . . . . . . . . . . . . . . . . . . . 22
FRANÇAIS
Table des matières . . . . . . . . . . . . . . . . 43
Welcome to the World of Sanyo
Thank you for purchasing a Sanyo Stereo LCD
Television. You made an excellent choice for
Performance, Styling, Reliability, and Value. The
TV is designed with easy to use on-screen set-up
instructions and operating features. Need
assistance? Visit our Web site at
www.sanyoctv.com or call toll free
1-800-877-5032.
Importado Por :
Comercializadora México
Americana, S. DE R.L. DE C.V.
Nextengo Nº 78
Col. Santa Cruz Acayucan
Del. Azcapotzalco, México D.F. C.P.
02770, RFC CMA 9109119L0
Telefono: 55-5328-3500
As an ENERGY STAR
®
Partner, Sanyo
Manufacturing Corporation has determined
that this product meets the ENERGY STAR
®
guidelines for energy efficiency.
CLT1554
CLT2054
CLT1554
CLT2054
Important Safety Instructions for LCD TV
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding-type plug has
two blades and a third grounding prong. The wide blade
or the third prong are provided for your safety. If the pro-
vided plug does not fit fully into your outlet, consult an
electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or
pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the
manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with
the apparatus. When a cart is used, use
caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning
storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Ser-
vicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally,
or has been dropped.
15. If an outside antenna is connected to the television
equipment, be sure the antenna system is grounded so
as to provide some protection against voltage surges
and built up static charges. In the U.S. Selection 810-
21 of the National Electrical Code provides
information with respect to proper grounding of the
mast and supporting structure, grounding of the lead-
in wire to an antenna discharge unit, size of grounding
conductors, location of antenna discharge unit, con-
nection to grounding electrodes, and requirements for
the grounding electrodes.
16. An outside antenna system should not be located in the
vicinity of overhead power lines or other electrical
light or power circuits, or where it can fall into such
power lines or circuits. When installing an outside
antenna system, extreme care should be taken to keep
from touching such power lines or circuits as contact
with them might be fatal.
17. The AC Adapter power supply should not be placed in a
confined area. Proper ventilation is required to ensure
reliable operation and to protect it from overheating
18. "Apparatus shall not be exposed to dripping or splash-
ing and no objects filled with liquids, such as vases,
shall be placed on the apparatus."
EXAMPLE OF ANTENNA GROUNDING ACCORDING TO NATIONAL
ELECTRICAL CODE, ANSI/NFPA 70
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR
BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A
RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT.
THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND
MAINTENANCE INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THIS
UNIT.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE
TO RAIN OR MOISTURE.
IMPORTANT SAFETY INSTRUCTIONS
“Note to CATV system installer:
This reminder is provided to call the CATV system installer’s attention to Article 820-40
of the NEC that provides guidelines for proper grounding and, in particular, specifies that
the cable ground shall be connected to the grounding system of the building, as close to
the point of cable entry as practical.”
2
Need help?
Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032
CONTENTS
Important Safety Instructions . . . . . . . . . . . . . . . . . . . 2
Care and Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 ~ 6
Positioning the LCD TV . . . . . . . . . . . . . . . . . . . . . . 5
Using the Tilt Stand . . . . . . . . . . . . . . . . . . . . . . . . . 5
Removing the TV Tilt Stand . . . . . . . . . . . . . . . . . . . 5
Power Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Installing Batteries in the Remote Control . . . . . . . . 6
Connecting Cable, RF Antenna, or a Satellite
Receiver to the TV 75-Ohm jack . . . . . . . . . . . . . . . 6
Top and Back Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Optional Feature – Wall Mounting . . . . . . . . . . . . . . . 7
Using the Component Video and
Audio Input Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Connecting a DVD Player . . . . . . . . . . . . . . . . . . . . 8
Using the Audio / Video Input Jacks . . . . . . . . . . . . . . 9
Connecting a VCR or DVD Player . . . . . . . . . . . . . 9
Using the Remote Control . . . . . . . . . . . . . . . . . . . . . 10
TV Adjustment and Setup . . . . . . . . . . . . . . . . . 11 ~ 14
How to Operate the On-Screen Menu . . . . . . . . . . 12
Adjusting Picture: Auto / Game / Manual . . . . . . . 12
Adjusting Sound: Audio / Bass / Treble /
Surround . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Adjusting the Channel: Antenna / CH. Search /
CH. Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Selecting a Display Language . . . . . . . . . . . . . . . . .14
Set Up: Color Enhancer / Aspect Ratio /
Backlight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Closed-Captioning . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
V-Guide Operation (Parental Control) . . . . . . 16 ~ 18
Helpful Hints (Problems / Solutions) . . . . . . . . . . . . 19
Warranty (Mexico) . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Warranty (U.S.A. and Canada) . . . . . . . . . . . . . . . . . 21
Child Safety Matters . . . . . . . . . . . . . . . . . . Back cover
The surface of the cabinet can be damaged if not properly maintained. Many
common household aerosol sprays, cleaning agents, solvents, and polishes will
cause permanent damage to the fine surface.
1. Unplug the power cord before cleaning the television.
2. Clean the screen and cabinet with a soft dry cloth.
Note:
Never spray liquids on the screen because it can run down and drip onto
the chassis. This may cause component failure not covered under Warranty.
CARE AND CLEANING
3
Need help?
Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032
15 inch & 20 inch flat-screen
Detachable tilt Stand—tilts TV down 5º up 10º
Wall Mountable
3-DY/C Digital Comb Filter
AC Adaptor
Power Saving Mode (Back Light function)
V-chip for Movies and TV guidelines rating limits
Closed-Captioning
MTS stereo/SAP decoder
Integrated front speaker 5 x 9 cm (two)
Surround Sound
Bass / Treble
Picture adjustments–Aspect Ratio: 4:3 and 16:9 format
Factory preset adjustments for Picture
Automatic Channel Search
Color Enhancer
Receives 181 Channels: VHF 2~13;UHF 14~69;
Cable TV 1, 14~125
Component video input for the best picture signal
from your VCR or DVD
Rear AV input (2 sets R/L)
S-Video Input
Trilingual Menu Options
Sleep Timer
24-Key Remote Control
LCD Panel Size (Measured Diagonally):
CLT1554 . . . . . . . . . . . . .15-inch flat screen EDTV monitor
CLT2054 . . . . . . . . . . . . 20-inch flat screen EDTV monitor
Picture Resolution: CLT1554—1024x768 (XGA)
CLT2054—640x480 (VGA)
Scanning Format . . . . . . . . . . . . . . . . . . . . . . . 480p
(All signals are converted to 480p)
Jacks and Connectors:
RF Antenna Input (75 ohm)
AV1 Input: S-Video, Composite, Audio L/R
AV2 Input: Composite, Audio L/R
AV3 Input: Component (Y/Pb/Pr), Audio L/R
DC power input
Antenna Input . . . . . . . . . . . . . . . . . UHF/VHF/CATV 75 ohm
Power Requirement . . . . . . . . . . . . Source: AC 120V, 60Hz
AC Power Consumption (average) . . . . CLT1554—23 watts
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CLT2054—34 watts
Size and Weight (approximately):
CLT1554 Horizontal Dim. (Width) . . . . 19.7 in. (500mm)
Vertical Dim. (Height) . . . . . 12.9 in. (328mm)
Depth Dim. (Thickness) . . . . 7.2 in. (184mm)
CLT2054 Horizontal Dim. (Width) . . . . 23.8 in. (604mm)
Vertical Dim. (Height) . . . . . 16.3 in. (413mm)
Depth Dim. (Thickness) . . . . 7.2 in. (184mm)
Weight: CLT1554 . . . . . . . . . . . . . . 12.7 (lbs), 5.8 (Kg)
CLT2054 . . . . . . . . . . . . . . 20.3 (lbs), 9.2 (Kg)
Specifications are subject to change without notice.
CAUTION: FCC Regulations state that improper modifica-
tions or unauthorized changes to this unit may
void the user’s authority to operate the unit.
This symbol on the nameplate means the product is Listed by Underwriters’ Laboratories Inc. It is
designed and manufactured to meet rigid U.L. safety standards against risk of fire, casualty and
electrical hazards.
SPECIFICATIONS
FEATURES
4
Need help?
Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032
GETTING STARTED
POSITIONING THE LCD TV
Always use an appropriate table or stand when posi-
tioning your TV. Allow enough space to tilt the TV. For
best viewing, avoid locating the TV where direct sun-
light or indoor lighting will fall on the screen. (
Note:
CLT1554 measurements are in the parenthesis.)
USING THE DETACHABLE TV TILT
STAND
To change the viewing angle of your
LCD TV, position your hand on the
top and hold the stand firmly, then tilt
the LCD screen forward or backward.
CAUTION: Do not position hand
under the screen while tilting the TV
forward.
Note: Maximum tilt is 5º to the front
and 10º to the back.
REMOVING THE TV TILT STAND
Tools Needed: Phillips screwdriver
Important Note: Position TV face down on a pad-
ded or cushioned surface to protect the screen and
finish.
1
Remove the screw from the stand back cover.
2
Remove four (4) screws from the metal bracket.
CAUTION: Hold the stand firmly as you
remove the last screw.
3
Carefully remove the TV stand.
POWER CONNECTION
1
Insert AC Adaptor into the DC input terminal on
the TV.
2
Insert AC power cord into Adaptor; then insert
the plug fully into a 120V, 60Hz, AC power
outlet.
BACK OF TV DC
POWER INPUT
TERMINAL
AC
ADAPTOR
AC CORD
2
POWER OUTLET
(HOUSEHOLD)
5
Need help?
Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032
Warning: This 12V AC/DC product is
intended for indoor home use only. It
is not to be exposed to high outdoor ambient
temperatures found in automotive, marine, and
aviation environments.
1
1
2
CATV FRANCHISE NOTE: Cable companies, like public
utilities, are franchised by local government authorities. To
receive cable programs, even with equipment which is
capable of receiving cable channels, the consumer must
subscribe to the cable company’s service.
CONNECTING CABLE SERVICE, RF
ANTENNA, OR SATELLITE RECEIVER
TO THE TV
Cable Service
RF Antenna
Satellite Receiver
TV Back
INSTALLING BATTERIES IN THE REMOTE
CONTROL
Use 2 “AAA” batteries (Not supplied).
Be sure batteries are installed correctly.
Note: Do not mix old batteries with new ones or mix different types of
batteries together.
VCR Back
GETTING STARTED
Operational Tip for No
Signal Connection:
If the TV is used as a monitor only,
with a DVD player or some other type
of external equipment, and no cable or
antenna signal is available, the follow-
ing setup is necessary:
Your TV is designed to automatically
search for available channels. There-
fore, the initial start up requires that
you press the MENU key, enabling
the TV to automatically go through
the channel search process before you
can operate the TV. After the initial
channel search is completed, you must
press the MENU key again to com-
plete the channel search process. This
may take several minutes.
After the channel search process is
complete (2 searches), you can press
the INPUT key on the remote control
to use the TV as a monitor.
TV will automatically select the correct Antenna mode
for the type of Analog RF signal connected automatically.
Use “Antenna Selection” in the Setup menu to change the
Antenna Mode.
TV will switch off automatically after 15 minutes if there is
no signal reception (cable out or station not broadcasting).
Exception—When the Video mode is selected, the TV will
not automatically switch off when signal reception has
stopped for 15 minutes.
If you move the TV to a new location, press the RESET key
twice after connecting the signal and turning on the TV.
6
Need help?
Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032
TOP AND BACK PANEL
OPTIONAL FEATURE—WALL MOUNTING
TOP VIEW
Note:
The Channel (up) /
(down), Volume + (up) / (down),
and Power keys function exactly
like the keys on your remote
control.
S-Video Input Jack
To enhance video detail use
the S-Video AV1 jack
instead of the Video jack, if
available on your external
equipment. (S-Video con-
nections will override
connections to the AV1
input jacks.) (See page 9.)
BACK VIEW
Antenna Input Terminal
Connect an RF antenna,
cable, or satellite receiver
to this jack as shown on
page 6.
Audio/Video Input Jacks
(AV1/AV2)
Connect video equipment here
(see page 9).
Note: S-Video connection over-
rides the AV1 video connection
.
480i/p Component Video / Audio
Input Jacks (AV3)
Connect external equipment to the
Y, Pb, Pr and Audio L/R jacks.
(See page 8.)
DC Power Input Jack
Connect AC Adaptor to this
terminal.
Optional Accessories: Extra cables
are needed for advance connec-
tions. Reference the connections
accessories list on
pages 8~9.
This LCD TV is designed so that it may be mounted on a wall, if desired.
Use the slots on the back of your TV to secure it using a wall mounting kit.
Notes: Wall Mounting kit is not supplied, check with your local electronic
supply store.
LCD Mounting screws should be M4 thread with a minimum
length of 9mm. Screws must not exceed 20mm in length.
Back View
7
Need help?
Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032
Remote Control
CONNECTING A DVD PLAYER OR OTHER EQUIPMENT
Switch off TV and external equipment before connecting cables. (Cables are not supplied.)
1
Connect a DVD Player or other equipment’s Component Video Out to the TV Component Video In (Y-
Pb-Pr) Jacks.
2
Connect the DVD Player’s Audio Out to the TV Component L/R Jacks.
3
Press POWER to turn on the TV. Turn on external equipment also.
4
Press the INPUT key to select COMPONENT3.
DVD Player
USING THE COMPONENT AUDIO/VIDEO INPUT JACKS
TV COMPONENT3
JACKS
TV Back
1
A solid Blue screen with COMPONENT3 displayed
means that the Video mode is selected, but no signal is
being detected at the Component jacks. Check connec-
tion, and turn on external equipment.
Press the INPUT key after connecting cables to access
the A/V Inputs. There is NO need to tune to a blank
channel.
What you will need
for connections:
1
Component Video
Cable – 1
2 Audio Cable – 1
8
Need help?
Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032
2
3
4
CONNECTING A VCR OR DVD PLAYER
Switch off TV and external equipment before connecting cables. (Cables are not supplied.)
1
Connect VCR, DVD Player, or other equipment’s Audio Video Out to the TV Audio Video Input.
For Mono VCR (Single Audio Jack) connect VCR Audio Out to TV Audio (L) Input.
Optional (
11
/
22
)
Connect DVD Player or other equipment’s S-Video Out to the TV S-Video In Jack.
Using the S-Video jack overrides the Video (AV1) jack.
Connect DVD Player or other equipment’s Audio Out to the TV Audio In Jacks.
2
Press POWER to turn on the TV. Turn on external equipment also.
3
Press the INPUT key to select VIDEO1 or VIDEO2.
USING THE AUDIO/VIDEO INPUT JACKS
Back View of VCR
Remote Control
TV AV Input Jacks
DVD Player
Press the INPUT key after connecting cables to access the
A / V Inputs. There is NO need to tune to a blank channel.
Make sure all cable connectors are fully seated on jacks.
Always match A/V cables according to the colors; red
for right audio, white for left audio and yellow for video.
A solid Blue screen with the word VIDEO1 or VIDEO2,
displayed means that the Video mode is selected, but
no signal is being detected at the Video jacks. Check
connections, turn on external equipment.
What you will need
for connections:
1
A/V Cable – 1
OPTIONAL CONNECTION
11
S-Video Cable – 1
22
Audio Cable – 1
9
Need help?
Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032
11
22
3
2
1
Input Key—Press to select the program source
to watch: TV signal or signal from the DVD
Player or other equipment you have connected to
the A/V jacks.
Menu Key—Use this key with the /and
/
++
keys to navigate and adjust features of the
on-screen menu system (see pages 11 ~ 13).
Channel Scanning (CH /) and Volume
(VOL
/
++
) Keys—Press to scan through the
channels in memory and to adjust the volume.
Mute Key—Press once to minimize the volume.
Press again to restore.
Note:
When using the
audio out jacks this key will not mute the sound.
Number Keys—Two keys must be pressed to
select a channel. Example: Press 0 then 6 to
select channel 6. For cable channels 100 through
125, press and hold the 1 key until C1–
appears. Then press the other two numbers.
Caption Key (See page 15.)
V-Guide Key (See page 16 ~ 18.)
Reset Key—Press this key twice to restore
factory settings. The TV will automatically start
Channel Search and clear all customized settings.
These features will automatically reset:
Picture Controls: Auto, Game, and Manual:
Color, Tint, Contrast, Brightness, and Sharpness
Sound Controls: Audio, Bass, Treble, and
Surround
Channel Controls: Antenna, CH. Search and
CH. Memory
Set Up Controls: Color Enhancer, Aspect
Ratio, and Backlight
Caption to OFF
V-Guide to OFF
Language to English
Sleep Timer (if previously set)
Video to TV (if previously set)
If desired, personal settings can be made again
using the menu options.
Power Key—Press to turn TV on or off.
Recall Key—Select a channel then select another
channel using the number keys. Press Recall to
switch between the channels.
Display Key—Press once to display the channel
number. Press again to remove the display.
Sleep Key—Press this key, then press the “0
key to set the Sleep Timer. The desired time can
be set from 30 minutes up to 3 hours in 30
minutes increments. Sleep Timer will switch off
the TV automatically.
Note:
The Sleep Timer cancels when the TV is
turned off or if a power failure occurs.
USING THE REMOTE CONTROL
11
12
Points toward TV
11
12
Be sure batteries are installed correctly.
Point the remote control toward the TV you want to
operate. Objects between the remote control and the TV
may cause misoperation of the remote control function.
10
Need help?
Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032
The on-screen menu provides the viewer with easy access to adjustments and settings. The LCD menu is
displayed in colorful screen icons that identifies each adjustable option. Just use the keys on the remote
control and follow the on-screen instructions.
HOW TO OPERATE THE ON-SCREEN MENU
1
Press MENU key to display main menu options.
2
Use the /+ keys to choose desired option. (Selected item is
highlighted in YELLOW.)
3
Use the key and to select the desired option sub-menu
feature.
4
Use the /and /+ keys to select and adjust sub-menu
options (red arrow indicates selected item.)
5
Press the MENU key to select other options from the main
menu or to exit.
ADJUSTING PICTURE
SELECTING PRESET PICTURE AUTOMATICALLY
Choose Auto from the Picture menu options.
FOR AUTOMATIC GAME SETTING
1
Choose Game from the Picture options. The screen will
automatically change to factory preset settings.
2
Press the MENU key to exit.
Note: Select the input jacks by pressing the INPUT key on the remote control.
ADJUST PICTURE MANUALLY
1
Choose Manual from the Picture menu options.
2
Press + key to access the sub-menu options.
3
Use the /keys to select the picture setting you want to change.
4
Use the /+ keys to adjust settings.
TV ADJUSTMENT AND SETUP
(Continued on page 12.)
The menu will display on the screen for approximately
20 seconds. Press MENU again to redisplay.
Use the Channel
/
keys and the Volume
/
++
keys
to navigate through the menus and to make selections
from the menus.
11
Need help?
Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032
TV ADJUSTMENT AND SETUP (Continued)
ADJUSTING SOUND
Select desired sound setting: Audio, Bass, Treble or Surround.
1
Choose Audio from the Sound menu options.
2
Use the /keys to select the sound setting you want to
change.
(Red arrow indicates selected highlighted option.)
3
Use the /+ keys to adjust settings: Stereo, Mono or SAP.
Notes: Stereo and SAP must be part of the broadcast signal. The TV will
automatically reset to stereo if unplugged or a power failure occurs.
4
To adjust the other sound features: Bass, Treble, or Surround,
simply follow steps 2~3 above.
ADJUSTING THE CHANNEL TUNING
RESETTING THE ANTENNA MODE AND
CHANNEL SEARCH
Resetting the Antenna or CH. (Channel) Search is required only if
additional channels become available, such as moving to another city
or having a cable service installed.
1
Choose Antenna or CH. Search from the Channel menu
options. (Red arrow indicates selected menu option.)
2
Use the /+ keys to change Antenna settings: Cable or
UHF/VHF. For CH. Search, press the + key. The TV will auto-
matically start searching for your channels. It will take the TV
several minutes to complete the search.
12
Need help?
Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032
13
Need help?
Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032
ADDING OR DELETING CHANNELS
1
Choose CH. Memory from the Channel menu options.
(Red arrow indicates selected highlighted option.)
2
Press the + key to select the channel number entry
area.
3
Enter the channel number you want to add or delete
(example): C34. For cable channels above 99, press
and hold the 1 key until C1– – appears. Then enter the
other two numbers.
4
Press the + key to change the present setting.
Example: Added will change to Deleted. This takes
about three seconds. During that time, the word
Added” or “Deleted” will become white.
5
Use the 0~9 or /keys to chose other channels to
delete or add, or press MENU key to exit.
Under weak stereo signal conditions, you may receive
better quality sound in the “Mono” position.
Surround sound expands the sound effect while
receiving MTS stereo signals.
Pressing the RESET key will clear all customized set-
tings. The TV will automatically start Channel Search
and clear settings.
Channels deleted from scan memory can be selected
with the number keys.
Restoring deleted channels, use the on-screen menu to
manually add channels or start CH. Search from the
menu. It make take a few minutes to search thru the
available channels. or press the RESET key.
SELECTING THE DISPLAY LANGUAGE
1
Choose English, Francais (French), or Espanol (Spanish) from
the Language menu options.
2
Use the /keys to select the desired language.
TV SET-UP
Use the following features to customize your LCD TV according to your
personal preference:
MENU ITEM FUNCTION
Color Enhancer Normal—highlights the picture flesh tones and color
highlights.
Warm—deepens the picture red tints.
Cool—highlights the picture blue tints.
Aspect Ratio Use this feature when equipment is connected to the
component input jacks:
The 4:3 setting is for normal viewing.
The 16:9 setting changes the picture image to wide-
screen viewing with minimal portion of top
and bottom compressed.
Back Light Power (energy) saving function—The picture image
and background automatically changes as follows:
Bright—High Power (default setting)
Middle—Mid Power
Dark—Lower Power
ADJUSTING THE SET UP FEATURES
1
Choose Color Enhancer, Aspect Ratio, or Back Light menu options.
2
Use the /keys to select the setting you want to change.
3
Use the /+ keys to adjust settings.
16:9 Screen Format
14
Need help?
Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032
Captioning is text information transmitted along with the picture and sound so it can be displayed on the TV
screen. Because different types of captions can be transmitted with the TV signal, separate captioning modes
are provided. The captioning modes recognized by this model are: Caption1 and Caption2. Local broadcast-
ers decide which caption signals to transmit.
CAPTION1: This is the main mode used for program captioning (words match the program you are watch-
ing). These captions are generally one or two lines.
CAPTION2: This is an alternative mode for program captioning. Caption2
may be used by the broadcaster to provide captions in another language, such
as, Spanish or French.
QUIKCAP: Allows captions to toggle on and off with the Mute function.
Press the MUTE key on the remote control to block the TV sound; the cap-
tions display automatically. Press the MUTE key again to restore the sound,
the captions will disappear. Quikcap displays program captions in the
Caption1 mode.
SETTING CAPTIONS
1
Press the Caption key on the remote control.
2
Press the 0 key to select options: OFF, CAPTION1, CAPTION2, or Quikcap.
Note: Channel number will not display continuously when captioning is on.
Caption1/ 2
CLOSED-CAPTIONING
15
Need help?
Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032
NOTE: THIS FEATURE IS DESIGNED TO COMPLY WITH THE UNITED STATES OF AMERICA’S FCC V-CHIP
REGULATIONS. THEREFORE, IT MAY NOT FUNCTION WITH BROADCASTS THAT ORIGINATE IN OTHER
COUNTRIES.
This Sanyo television is equipped with an electronic V-Chip to interpret MPAA (Motion Picture Association of
America) and TV Parental Guidelines rating codes. When these codes are detected, the TV will automatically
display or block the program, depending upon choices you make when setting up the V-Guide system.
The V-Guide system contain both age-based and content-based settings. This gives parents discretionary ways
of choosing appropriate material for their children to view.
Content ratings are represented by the initials D (Suggestive Dialog), L (Adult Language), S (Sexual Situa-
tions), V (Violence), and FV (Fantasy Violence). When programming contains any or all of these conditions,
these letters become part of the icon that is displayed on the TV screen.
A rating icon will generally appear in the upper left hand corner of the TV screen (see page 18.)
Use this feature to supervise television viewing for young children. This television can be set to automatically
block programs with content you deem as inappropriate for your children to view.
The ability of the television to block the reception of specific programming content depends upon several
conditions: 1) The program must be rated, 2) Networks must broadcast the rating code data, 3) Cable com-
panies must transmit the rating code signal, and 4) The TV must be properly setup to decode the signal.
SETTING A RATING
1
Press the V-GUIDE key on the remote control to display menu.
2
Press the /+ keys to switch V-Guide ON.
3
Press the + key to access Ratings: MPAA Ratings or TV Ratings.
( Arrow indicates selection.)
V-GUIDE (PARENTAL CONTROL) INFORMATION
V-GUIDE OPERATION
When in the V-Guide menu system, the
/+
keys allow
you to navigate between the ratings and the options
menu.
Blocking TVY7 does not block higher ratings.
Y
ou can block a content rating such as TVPG-V and still
be able to watch TVPG programs with ratings of S-L-D
provided TVPG is unblocked (U).
To temporarily unblock or view Blocked (B) programs,
set V-GUide to OFF, or press the RESET key twice to
clear all Blocked (B) ratings and other customized
settings
.
16
Need help?
Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032
SETTING A MPAA MOVIE RATING
4
Use the / keys to block ratings: G, PG, PG-13, R, NC-17, and X.
5
Press the + key to set the BLOCKED rating. (√ Check mark indicates
Blocked rating.)
Note: The TV will automatically block (B) ratings above or unblock (U) ratings
below selection. For example, if you block rating R, NC17 and X will be
blocked as well.
TO CLEAR MPAA MOVIE RATINGS
(Repeat Steps 1 and 3 to display V-Guide menu, if needed.)
6
Use the / keys to highlight Clear.
7
Press the + key to clear all blocked ratings.
SETTING TV RATINGS
(Repeat Steps 1 and 3 to display V-Guide menu, if needed.)
8
Use the / keys to block TV ratings: TV-Y, TV-Y7, TV-G,
TV-PG, TV-14, TV-MA, or Content.
9
Press the + key to set the BLOCKED rating. (√ Check mark
indicates Blocked rating.)
SETTING CONTENT-BASED GUIDELINES
(Repeat Steps 1 and 3 to display V-Guide menu, if needed.)
1
0
Use the / keys to highlight Content options.
1
1
Press the + key to display the TV and Content Rating Options: Fantasy
Violence, Violence, Sexual Situations, Adult Language, Suggestive
Dialog.
1
2
Use the / keys to highlight the TV Rating (highlighted in
yellow). Then press the + key to block the content category (high-
lighted in white). Press + key again to Block or Unblock rating. Use
the / keys to highlight another rating.
1
3
Press the key to return to the TV and Content Rating to block or
unblock other categories. Repeat step 11 to change other ratings.
Note: Networks and local
stations may or may
not include the
content ratings
portion of the TV
Parental Guidelines.
17
Need help?
Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032
TO CLEAR TV/CONTENT-BASED RATINGS
(Repeat Steps 1 and 3 to display V-Guide menu, if needed.)
1
4
Use the / keys to highlight Clear.
1
5
Press the + key to clear all blocked ratings.
TURNING OFF THE V-GUIDE
1
Press the V-GUIDE key.
2
Use the / keys to select V-Guide. Then press /+ keys to select OFF.
ALL CHILDREN—Program is designed to be appro-
priate for children ages 2-6.
DIRECTED TO OLDER CHILDREN—Program is
designed for children 7 and above. Material may
include mild fantasy violence (FV) or comedic
violence.
GENERAL AUDIENCE—Program suitable for all
ages. Contain little or no violence, no strong
language or sexual dialogue or situations.
PARENTAL GUIDANCE SUGGESTED—Program con-
tains material that may be unsuitable for younger
children. Material contains one or more for the
following: moderate violence (V), some sexual situa-
tions (S), infrequent coarse language (L), or some
suggestive dialogue (D).
PARENTS STRONGLY CAUTIONED—Some material
is unsuitable for children under 14 years of age.
Parents are strongly urged to use cautions against
letting children that 14 watch unattended. Material
contains intense violence (V), intense sexual situa-
tions (S), strong coarse language (L), or intensely
suggestive dialogue (D).
MATURE AUDIENCE ONLY—Program is designed to
be viewed by adults and therefore may be unsuitable
for children under 17 years of age.
TV RATINGS (AGE/CONTENT-BASED)
G GENERAL AUDIENCES—All ages admitted.
PG PARENTAL GUIDANCE SUGGESTED—Some
material may not be suitable for children.
PG-13 PARENTAL GUIDANCE CAUTIONED—Some
material may be inappropriate for children
under 13.
R RESTRICTED—Under 17 requires accompany-
ing parent or adult guardian
NC17 NO ONE 17 AND UNDER ADMITTED
MPAA MOVIE RATINGS (AGE-BASED)
18
Need help?
Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032
V-GUIDE OPERATION (Continued)
Problem: Check these Conditions: Try these Solutions: Page No.
TV turns off
automatically.
Check signal (Cable/Ant.) connection.
Power surge protection feature.
Press POWER key.
The sleep timer may have been set.
Unplug TV momentarily.
5
No picture, poor
picture, or wavy
lines in picture.
Check antenna connections.
May be station trouble.
Brightness or Contrast misadjusted.
Possible interference from household
appliance.
Adjust antenna.
Try a different channel.
Select AUTO from Picture/Sound
on-screen menu or press RESET key.
Turn off Mixer, Drill, Blender, etc.
6, 11
No sound, poor
sound.
No sound on
some channels.
May be station trouble.
May be MUTE function.
Check Audio/ Video connections
Try a different channel.
Adjust Volume.
8~9
11
Picture too Bright
or too Dark.
Check Backlight (power energy
saving) settings.
Select Set-up Menu to set BACK
LIGHT option to Middle setting.
14
Cannot display
picture on a full
screen.
Check if Aspect Ratio setting is 16:9.
Select Set-up Menu to set ASPECT
RATIO option to 4:3 normal setting.
14
No Captioning.
Check if station is broadcasting a
Closed-Caption signal.
Press CAPTION key to select
Captioning.
15
Poor color or
no color.
Check if program is in color.
Check antenna connections.
Color or Tint misadjusted.
May be station trouble.
Try a different channel.
Adjust antenna.
Press RESET key to restart channel
search.
11
Blue Screen with
Video1, Video2, or
Component3
displayed.
Check Audio/Video connections.
Check external equipment.
Check external equipment setting.
check DVD setting.
Press INPUT key.
Switch on external equipment.
Set external equipment output con-
nections to match input connections.
8~10
No TV Stereo or
SAP sound.
Check if station is broadcasting a true
MTS stereo signal or a SAP signal.
Select STEREO or SAP from Audio on-
screen menu.
12
Cannot select or
scan some
channels.
Channel may be removed from
memory.
Check antenna connections.
V-Guide is set to block programming.
Select CH. SCAN MEMORY and
manually add channels or start
CH. (channel) search.
Set V-GUIDE to OFF or press RESET key
to clear all setting.
13
16~18
Remote Control
will not work TV.
Check batteries.
Check if TV is plugged in.
Check external equipment.
Replace batteries.
Aim remote control at front of TV.
6, 10
Menu System
words seem
misspelled.
May be a different language is
selected.
Reselect menu language choice using
the on-screen menu.
14
Cabinet makes
popping sound.
This is a normal condition during
warm-up and cool down of the plastic
cabinet parts.
Because of the Quality we build into our product, very few problems are actual TV defects. Most problems only involve
simple hookup or setup changes that can be solved by the customer. Please check the chart below and try the solutions listed
for your problem. If the problem still persists, before returning your TV, visit our website at www.sanyoctv.com or call us
toll free at 1.800.877.5032.
HELPFUL HINTS (Problems/Solutions)
19
Need help?
Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032
20
Need help?
Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032
IMPORTADOR:
COMERCIALIZADORA MEXICO
AMERICANA, S.DE R.L. DE C.V.
AV. NEXTENGO N
o
78
COL. SANTA CRUZ ACAYUCAN
DEL. AZCAPOTZALCO, MÉXICO, D.F. C.P. 02770
RFC: CMA9109119L0
GUARANTEE
THE APPARATUS THAT YOU HAVE ACQUIRED HAS A ONE YEAR GUARANTEE FOR MANUFACTURING DEFECTS AND
A ONE YEAR SERVICE WARRANTY FROM THE DATE OF PURCHASE GRANTED BY:
COMERCIALIZADORA MEXICO-AMERICANA, S. DE R.L. DE C.V.
UNDER THE FOLLOWING CONDITIONS:
1. TO MAKE THE GUARANTEE EFFECTIVE, SIMPLY SHOW THIS POLICY FILLED OUT BY THE STORE OR SUPPLIER
UNIT OR THIS SALES INVOICE, WITH THE APPARATUS IN ANY OF THE SERVICE CENTERS INDICATED ON THIS
GUARANTEE.
2. IF THE FAULT IS ATTRIBUTED TO A MANUFACTURING DEFECT, THE APPARATUS WILL BE REPLACED OR YOUR
MONEY REFUNDED. DURING THE 30 DAYS SUBSEQUENT TO THE PURCHASE THE GUARANTEE WILL BE VALID
AT THE STORE WERE THE APPARATUS WAS PURCHASED, PRESENTING THE ABOVE DOCUMENTS.
3. REPAIR TIME WILL NEVER BE MORE THAN 30 DAYS. IF THIS TIME HAS ELAPSED, AND THE PRODUCT ISN’T
REPAIRED, COMERCIALIZADORA MEXICO AMERICANA, S. DE R.L. DE C.V. WILL PROCEED TO EFFECTUATE
THE EXCHANGE FOR AN EQUIVALENT APPARATUS OR THE RETURN OF THE BUYING-SALE COST
RESPECTIVELY.
4. THIS GUARANTEE WILL COVER ITS TOTALITY OF PIECES, COMPONENTS AND SERVICE REPAIR OF PRODUCT,
AND THE RESPECTIVE COST OF TRANSPORTATION.
THIS GUARANTEE WILL
BE NULL AND VOID IN THE FOLLOWING CIRCUMSTANCES:
*
WHEN PRODUCT HAS BEEN USED IN A DIFFERENT CONDITION THAN ITS NORMAL USE.
*
WHEN PRODUCT HASN’T BEEN OPERATING CORRECTLY ACCORDING TO THE INSTRUCTIONS IN THIS MANUAL.
*
WHEN PRODUCT HAS BEEN CHANGED OR REPAIRED BY PERSONS NOT AUTHORIZED FROM THE
MANUFACTURER, IMPORTER, OR MERCHANT RESPONSIBLE RESPECTIVE.
CENTRO DE SERVICIO Y LUGAR DONDE OBTENER PARTES,
COMPONENTES, CONSUMIBLES Y ACCESORIOS:
SUCURSAL VALLEJO SUCURSAL MINERVA
Poniente 126 N
o
288 B Silos N
o
135, Col. Minerva
Col. Nueva Vallejo Deleg. Iztapalapa
México, D.F. México, D.F. 09810
Tels. 5567-5378 Tels. 5646-4551
5368-0105, 8589-8033 5646-4550
DESCRIPTION: ________________________________ BRAND: __________________ MODEL:__________________
CLIENT’S NAME: __________________________________________________________________________________
ADDRESS: ______________________________________________________________________________________
EXTERIOR NUMBER: _______________________ INTERIOR NUMBER: _______________________
SUB DIVISION: ____________________________________________ STATE/DELEGATION: _______________________
TELEPHONE: _____________________________________________
STAMP, DATE AND SIGNATURE
OF
STORE
DESCRIPTION: Television
BRAND: SANYO
MODELS: CLT1554
CLT2054
MEXICO GUARANTEE
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60

Sanyo CLT-1554 Manuel utilisateur

Catégorie
Téléviseurs LCD
Taper
Manuel utilisateur
Ce manuel convient également à

dans d''autres langues