Sanyo CLT-1554 Manuel utilisateur

AS

Model No.:

No. de Modelo:

N

o

de modele:

Printed in U.S.A. SMC, August 2005

Impreso en U.S.A. SMC, Agosto 2005

Imprimé aux É.-U. SMC, août 2005

Part No. / No. de Parte /

No de pièce :

1AA6P1P4697C–

Service Code/Código de Servicio/

Code de service : 610 318 4272

SStteerreeoo LLCCDD TTVV

Owner’s Manual

Manual Del Propietario

Manuel d’instructions

“Read this manual before assembling (or

using) this product.”

ENGLISH

Table of Contents . . . . . . . . . . . . . . . . . 3

ESPAÑOL

Contenido . . . . . . . . . . . . . . . . . . . . . . 22

FRANÇAIS

Table des matières . . . . . . . . . . . . . . . . 43

Welcome to the World of Sanyo

Thank you for purchasing a Sanyo Stereo LCD

Television. You made an excellent choice for

Performance, Styling, Reliability, and Value. The

TV is designed with easy to use on-screen set-up

instructions and operating features. Need

assistance? Visit our Web site at

www.sanyoctv.com or call toll free

1-800-877-5032.

Importado Por :

Comercializadora México

Americana, S. DE R.L. DE C.V.

Nextengo Nº 78

Col. Santa Cruz Acayucan

Del. Azcapotzalco, México D.F. C.P.

02770, RFC CMA 9109119L0

Telefono: 55-5328-3500

“As an ENERGY STAR

®

Partner, Sanyo

Manufacturing Corporation has determined

that this product meets the ENERGY STAR

®

guidelines for energy efficiency.”

CLT1554

CLT2054

CLT1554

CLT2054

Important Safety Instructions for LCD TV

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in

accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators,

heat registers, stoves, or other apparatus (including

amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or

grounding-type plug. A polarized plug has two blades

with one wider than the other. A grounding-type plug has

two blades and a third grounding prong. The wide blade

or the third prong are provided for your safety. If the pro-

vided plug does not fit fully into your outlet, consult an

electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or

pinched particularly at plugs, convenience receptacles,

and the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the

manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table

specified by the manufacturer, or sold with

the apparatus. When a cart is used, use

caution when moving the cart/apparatus

combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning

storms or when unused for long periods of time.

14. Refer all servicing to qualified service personnel. Ser-

vicing is required when the apparatus has been

damaged in any way, such as power-supply cord or

plug is damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus has been

exposed to rain or moisture, does not operate normally,

or has been dropped.

15. If an outside antenna is connected to the television

equipment, be sure the antenna system is grounded so

as to provide some protection against voltage surges

and built up static charges. In the U.S. Selection 810-

21 of the National Electrical Code provides

information with respect to proper grounding of the

mast and supporting structure, grounding of the lead-

in wire to an antenna discharge unit, size of grounding

conductors, location of antenna discharge unit, con-

nection to grounding electrodes, and requirements for

the grounding electrodes.

16. An outside antenna system should not be located in the

vicinity of overhead power lines or other electrical

light or power circuits, or where it can fall into such

power lines or circuits. When installing an outside

antenna system, extreme care should be taken to keep

from touching such power lines or circuits as contact

with them might be fatal.

17. The AC Adapter power supply should not be placed in a

confined area. Proper ventilation is required to ensure

reliable operation and to protect it from overheating

18. "Apparatus shall not be exposed to dripping or splash-

ing and no objects filled with liquids, such as vases,

shall be placed on the apparatus."

EXAMPLE OF ANTENNA GROUNDING ACCORDING TO NATIONAL

ELECTRICAL CODE, ANSI/NFPA 70

CAUTION

RISK OF ELECTRIC SHOCK DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR

BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A

RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT.

THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND

MAINTENANCE INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THIS

UNIT.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE

TO RAIN OR MOISTURE.

IMPORTANT SAFETY INSTRUCTIONS

“Note to CATV system installer:

This reminder is provided to call the CATV system installer’s attention to Article 820-40

of the NEC that provides guidelines for proper grounding and, in particular, specifies that

the cable ground shall be connected to the grounding system of the building, as close to

the point of cable entry as practical.”

2

Need help?

Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032

CONTENTS

Important Safety Instructions . . . . . . . . . . . . . . . . . . . 2

Care and Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 ~ 6

Positioning the LCD TV . . . . . . . . . . . . . . . . . . . . . . 5

Using the Tilt Stand . . . . . . . . . . . . . . . . . . . . . . . . . 5

Removing the TV Tilt Stand . . . . . . . . . . . . . . . . . . . 5

Power Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Installing Batteries in the Remote Control . . . . . . . . 6

Connecting Cable, RF Antenna, or a Satellite

Receiver to the TV 75-Ohm jack . . . . . . . . . . . . . . . 6

Top and Back Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Optional Feature – Wall Mounting . . . . . . . . . . . . . . . 7

Using the Component Video and

Audio Input Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Connecting a DVD Player . . . . . . . . . . . . . . . . . . . . 8

Using the Audio / Video Input Jacks . . . . . . . . . . . . . . 9

Connecting a VCR or DVD Player . . . . . . . . . . . . . 9

Using the Remote Control . . . . . . . . . . . . . . . . . . . . . 10

TV Adjustment and Setup . . . . . . . . . . . . . . . . . 11 ~ 14

How to Operate the On-Screen Menu . . . . . . . . . . 12

Adjusting Picture: Auto / Game / Manual . . . . . . . 12

Adjusting Sound: Audio / Bass / Treble /

Surround . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Adjusting the Channel: Antenna / CH. Search /

CH. Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Selecting a Display Language . . . . . . . . . . . . . . . . .14

Set Up: Color Enhancer / Aspect Ratio /

Backlight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Closed-Captioning . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

V-Guide Operation (Parental Control) . . . . . . 16 ~ 18

Helpful Hints (Problems / Solutions) . . . . . . . . . . . . 19

Warranty (Mexico) . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Warranty (U.S.A. and Canada) . . . . . . . . . . . . . . . . . 21

Child Safety Matters . . . . . . . . . . . . . . . . . . Back cover

The surface of the cabinet can be damaged if not properly maintained. Many

common household aerosol sprays, cleaning agents, solvents, and polishes will

cause permanent damage to the fine surface.

1. Unplug the power cord before cleaning the television.

2. Clean the screen and cabinet with a soft dry cloth.

Note:

Never spray liquids on the screen because it can run down and drip onto

the chassis. This may cause component failure not covered under Warranty.

CARE AND CLEANING

3

Need help?

Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032

 15 inch & 20 inch flat-screen

 Detachable tilt Stand—tilts TV down 5º up 10º

 Wall Mountable

 3-DY/C Digital Comb Filter

 AC Adaptor

 Power Saving Mode (Back Light function)

 V-chip for Movies and TV guidelines rating limits

 Closed-Captioning

 MTS stereo/SAP decoder

 Integrated front speaker 5 x 9 cm (two)

 Surround Sound

 Bass / Treble

 Picture adjustments–Aspect Ratio: 4:3 and 16:9 format

 Factory preset adjustments for Picture

 Automatic Channel Search

 Color Enhancer

 Receives 181 Channels: VHF 2~13;UHF 14~69;

Cable TV 1, 14~125

 Component video input for the best picture signal

from your VCR or DVD

 Rear AV input (2 sets R/L)

 S-Video Input

 Trilingual Menu Options

 Sleep Timer

 24-Key Remote Control

LCD Panel Size (Measured Diagonally):

CLT1554 . . . . . . . . . . . . .15-inch flat screen EDTV monitor

CLT2054 . . . . . . . . . . . . 20-inch flat screen EDTV monitor

Picture Resolution: CLT1554—1024x768 (XGA)

CLT2054—640x480 (VGA)

Scanning Format . . . . . . . . . . . . . . . . . . . . . . . 480p

(All signals are converted to 480p)

Jacks and Connectors:

RF Antenna Input (75 ohm)

AV1 Input: S-Video, Composite, Audio L/R

AV2 Input: Composite, Audio L/R

AV3 Input: Component (Y/Pb/Pr), Audio L/R

DC power input

Antenna Input . . . . . . . . . . . . . . . . . UHF/VHF/CATV 75 ohm

Power Requirement . . . . . . . . . . . . Source: AC 120V, 60Hz

AC Power Consumption (average) . . . . CLT1554—23 watts

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CLT2054—34 watts

Size and Weight (approximately):

CLT1554 Horizontal Dim. (Width) . . . . 19.7 in. (500mm)

Vertical Dim. (Height) . . . . . 12.9 in. (328mm)

Depth Dim. (Thickness) . . . . 7.2 in. (184mm)

CLT2054 Horizontal Dim. (Width) . . . . 23.8 in. (604mm)

Vertical Dim. (Height) . . . . . 16.3 in. (413mm)

Depth Dim. (Thickness) . . . . 7.2 in. (184mm)

Weight: CLT1554 . . . . . . . . . . . . . . 12.7 (lbs), 5.8 (Kg)

CLT2054 . . . . . . . . . . . . . . 20.3 (lbs), 9.2 (Kg)

Specifications are subject to change without notice.

CAUTION: FCC Regulations state that improper modifica-

tions or unauthorized changes to this unit may

void the user’s authority to operate the unit.

This symbol on the nameplate means the product is Listed by Underwriters’ Laboratories Inc. It is

designed and manufactured to meet rigid U.L. safety standards against risk of fire, casualty and

electrical hazards.

SPECIFICATIONS

FEATURES

4

Need help?

Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032

GETTING STARTED

POSITIONING THE LCD TV

Always use an appropriate table or stand when posi-

tioning your TV. Allow enough space to tilt the TV. For

best viewing, avoid locating the TV where direct sun-

light or indoor lighting will fall on the screen. (

Note:

CLT1554 measurements are in the parenthesis.)

USING THE DETACHABLE TV TILT

STAND

To change the viewing angle of your

LCD TV, position your hand on the

top and hold the stand firmly, then tilt

the LCD screen forward or backward.

CAUTION: Do not position hand

under the screen while tilting the TV

forward.

Note: Maximum tilt is 5º to the front

and 10º to the back.

REMOVING THE TV TILT STAND

Tools Needed: Phillips screwdriver

Important Note: Position TV face down on a pad-

ded or cushioned surface to protect the screen and

finish.

1

Remove the screw from the stand back cover.

2

Remove four (4) screws from the metal bracket.

CAUTION: Hold the stand firmly as you

remove the last screw.

3

Carefully remove the TV stand.

POWER CONNECTION

1

Insert AC Adaptor into the DC input terminal on

the TV.

2

Insert AC power cord into Adaptor; then insert

the plug fully into a 120V, 60Hz, AC power

outlet.

BACK OF TV DC

POWER INPUT

TERMINAL

AC

ADAPTOR

AC CORD

2

POWER OUTLET

(HOUSEHOLD)

5

Need help?

Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032

Warning: This 12V AC/DC product is

intended for indoor home use only. It

is not to be exposed to high outdoor ambient

temperatures found in automotive, marine, and

aviation environments.

1

2

CATV FRANCHISE NOTE: Cable companies, like public

utilities, are franchised by local government authorities. To

receive cable programs, even with equipment which is

capable of receiving cable channels, the consumer must

subscribe to the cable company’s service.

CONNECTING CABLE SERVICE, RF

ANTENNA, OR SATELLITE RECEIVER

TO THE TV

Cable Service

RF Antenna

Satellite Receiver

TV Back

INSTALLING BATTERIES IN THE REMOTE

CONTROL

Use 2 “AAA” batteries (Not supplied).

Be sure batteries are installed correctly.

Note: Do not mix old batteries with new ones or mix different types of

batteries together.

VCR Back

GETTING STARTED

Operational Tip for No

Signal Connection:

If the TV is used as a monitor only,

with a DVD player or some other type

of external equipment, and no cable or

antenna signal is available, the follow-

ing setup is necessary:

Your TV is designed to automatically

search for available channels. There-

fore, the initial start up requires that

you press the MENU key, enabling

the TV to automatically go through

the channel search process before you

can operate the TV. After the initial

channel search is completed, you must

press the MENU key again to com-

plete the channel search process. This

may take several minutes.

After the channel search process is

complete (2 searches), you can press

the INPUT key on the remote control

to use the TV as a monitor.



TV will automatically select the correct Antenna mode

for the type of Analog RF signal connected automatically.

Use “Antenna Selection” in the Setup menu to change the

Antenna Mode.



TV will switch off automatically after 15 minutes if there is

no signal reception (cable out or station not broadcasting).

Exception—When the Video mode is selected, the TV will

not automatically switch off when signal reception has

stopped for 15 minutes.



If you move the TV to a new location, press the RESET key

twice after connecting the signal and turning on the TV.

6

Need help?

Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032

TOP AND BACK PANEL

OPTIONAL FEATURE—WALL MOUNTING

TOP VIEW

Note:

The Channel  (up) / 

(down), Volume + (up) / – (down),

and Power keys function exactly

like the keys on your remote

control.

S-Video Input Jack

To enhance video detail use

the S-Video AV1 jack

instead of the Video jack, if

available on your external

equipment. (S-Video con-

nections will override

connections to the AV1

input jacks.) (See page 9.)

BACK VIEW

Antenna Input Terminal

Connect an RF antenna,

cable, or satellite receiver

to this jack as shown on

page 6.

Audio/Video Input Jacks

(AV1/AV2)

Connect video equipment here

(see page 9).

Note: S-Video connection over-

rides the AV1 video connection

.

480i/p Component Video / Audio

Input Jacks (AV3)

Connect external equipment to the

Y, Pb, Pr and Audio L/R jacks.

(See page 8.)

DC Power Input Jack

Connect AC Adaptor to this

terminal.

Optional Accessories: Extra cables

are needed for advance connec-

tions. Reference the connections

accessories list on

pages 8~9.

This LCD TV is designed so that it may be mounted on a wall, if desired.

Use the slots on the back of your TV to secure it using a wall mounting kit.

Notes: Wall Mounting kit is not supplied, check with your local electronic

supply store.

LCD Mounting screws should be M4 thread with a minimum

length of 9mm. Screws must not exceed 20mm in length.

Back View

7

Need help?

Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032

Remote Control

CONNECTING A DVD PLAYER OR OTHER EQUIPMENT

Switch off TV and external equipment before connecting cables. (Cables are not supplied.)

1

Connect a DVD Player or other equipment’s Component Video Out to the TV Component Video In (Y-

Pb-Pr) Jacks.

2

Connect the DVD Player’s Audio Out to the TV Component L/R Jacks.

3

Press POWER to turn on the TV. Turn on external equipment also.

4

Press the INPUT key to select COMPONENT3.

DVD Player

USING THE COMPONENT AUDIO/VIDEO INPUT JACKS

TV COMPONENT3

JACKS

TV Back

1



A solid Blue screen with COMPONENT3 displayed

means that the Video mode is selected, but no signal is

being detected at the Component jacks. Check connec-

tion, and turn on external equipment.



Press the INPUT key after connecting cables to access

the A/V Inputs. There is NO need to tune to a blank

channel.

What you will need

for connections:

1

Component Video

Cable – 1

2 Audio Cable – 1

8

Need help?

Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032

2

3

4

CONNECTING A VCR OR DVD PLAYER

Switch off TV and external equipment before connecting cables. (Cables are not supplied.)

1

Connect VCR, DVD Player, or other equipment’s Audio Video Out to the TV Audio Video Input.

For Mono VCR (Single Audio Jack) connect VCR Audio Out to TV Audio (L) Input.

Optional (

11

/

22

)

Connect DVD Player or other equipment’s S-Video Out to the TV S-Video In Jack.

Using the S-Video jack overrides the Video (AV1) jack.

Connect DVD Player or other equipment’s Audio Out to the TV Audio In Jacks.

2

Press POWER to turn on the TV. Turn on external equipment also.

3

Press the INPUT key to select VIDEO1 or VIDEO2.

USING THE AUDIO/VIDEO INPUT JACKS

Back View of VCR

Remote Control

TV AV Input Jacks

DVD Player



Press the INPUT key after connecting cables to access the

A / V Inputs. There is NO need to tune to a blank channel.



Make sure all cable connectors are fully seated on jacks.



Always match A/V cables according to the colors; red

for right audio, white for left audio and yellow for video.



A solid Blue screen with the word VIDEO1 or VIDEO2,

displayed means that the Video mode is selected, but

no signal is being detected at the Video jacks. Check

connections, turn on external equipment.

What you will need

for connections:

1

A/V Cable – 1

OPTIONAL CONNECTION

11

S-Video Cable – 1

22

Audio Cable – 1

9

Need help?

Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032

11

22

3

2

1



Input Key—Press to select the program source

to watch: TV signal or signal from the DVD

Player or other equipment you have connected to

the A/V jacks.



Menu Key—Use this key with the / and

––

/

++

keys to navigate and adjust features of the

on-screen menu system (see pages 11 ~ 13).



Channel Scanning (CH /) and Volume

(VOL

––

/

++

) Keys—Press to scan through the

channels in memory and to adjust the volume.



Mute Key—Press once to minimize the volume.

Press again to restore.

Note:

When using the

audio out jacks this key will not mute the sound.



Number Keys—Two keys must be pressed to

select a channel. Example: Press 0 then 6 to

select channel 6. For cable channels 100 through

125, press and hold the 1 key until C1– –

appears. Then press the other two numbers.



Caption Key (See page 15.)



V-Guide Key (See page 16 ~ 18.)



Reset Key—Press this key twice to restore

factory settings. The TV will automatically start

Channel Search and clear all customized settings.

These features will automatically reset:

•

Picture Controls: Auto, Game, and Manual:

Color, Tint, Contrast, Brightness, and Sharpness

• Sound Controls: Audio, Bass, Treble, and

Surround

• Channel Controls: Antenna, CH. Search and

CH. Memory

• Set Up Controls: Color Enhancer, Aspect

Ratio, and Backlight

• Caption to OFF

• V-Guide to OFF

• Language to English

• Sleep Timer (if previously set)

• Video to TV (if previously set)

If desired, personal settings can be made again

using the menu options.



Power Key—Press to turn TV on or off.



Recall Key—Select a channel then select another

channel using the number keys. Press Recall to

switch between the channels.

Display Key—Press once to display the channel

number. Press again to remove the display.

Sleep Key—Press this key, then press the “0”

key to set the Sleep Timer. The desired time can

be set from 30 minutes up to 3 hours in 30

minutes increments. Sleep Timer will switch off

the TV automatically.

Note:

The Sleep Timer cancels when the TV is

turned off or if a power failure occurs.

USING THE REMOTE CONTROL















11

12



Points toward TV

11

12









Be sure batteries are installed correctly.



Point the remote control toward the TV you want to

operate. Objects between the remote control and the TV

may cause misoperation of the remote control function.

10

Need help?

Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032

The on-screen menu provides the viewer with easy access to adjustments and settings. The LCD menu is

displayed in colorful screen icons that identifies each adjustable option. Just use the keys on the remote

control and follow the on-screen instructions.

HOW TO OPERATE THE ON-SCREEN MENU

1

Press MENU key to display main menu options.

2

Use the – /+ keys to choose desired option. (Selected item is

highlighted in YELLOW.)

3

Use the  key and to select the desired option sub-menu

feature.

4

Use the / and – /+ keys to select and adjust sub-menu

options ( red arrow indicates selected item.)

5

Press the MENU key to select other options from the main

menu or to exit.

ADJUSTING PICTURE

SELECTING PRESET PICTURE AUTOMATICALLY

Choose Auto from the Picture menu options.

FOR AUTOMATIC GAME SETTING

1

Choose Game from the Picture options. The screen will

automatically change to factory preset settings.

2

Press the MENU key to exit.

Note: Select the input jacks by pressing the INPUT key on the remote control.

ADJUST PICTURE MANUALLY

1

Choose Manual from the Picture menu options.

2

Press + key to access the sub-menu options.

3

Use the / keys to select the picture setting you want to change.

4

Use the – /+ keys to adjust settings.

TV ADJUSTMENT AND SETUP

(Continued on page 12.)



The menu will display on the screen for approximately

20 seconds. Press MENU again to redisplay.



Use the Channel

 / 

keys and the Volume

––

/

++

keys

to navigate through the menus and to make selections

from the menus.

11

Need help?

Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032

TV ADJUSTMENT AND SETUP (Continued)

ADJUSTING SOUND

Select desired sound setting: Audio, Bass, Treble or Surround.

1

Choose Audio from the Sound menu options.

2

Use the / keys to select the sound setting you want to

change.

(Red  arrow indicates selected highlighted option.)

3

Use the – /+ keys to adjust settings: Stereo, Mono or SAP.

Notes: Stereo and SAP must be part of the broadcast signal. The TV will

automatically reset to stereo if unplugged or a power failure occurs.

4

To adjust the other sound features: Bass, Treble, or Surround,

simply follow steps 2~3 above.

ADJUSTING THE CHANNEL TUNING

RESETTING THE ANTENNA MODE AND

CHANNEL SEARCH

Resetting the Antenna or CH. (Channel) Search is required only if

additional channels become available, such as moving to another city

or having a cable service installed.

1

Choose Antenna or CH. Search from the Channel menu

options. (Red  arrow indicates selected menu option.)

2

Use the – /+ keys to change Antenna settings: Cable or

UHF/VHF. For CH. Search, press the + key. The TV will auto-

matically start searching for your channels. It will take the TV

several minutes to complete the search.

12

Need help?

Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032



13

Need help?

Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032

ADDING OR DELETING CHANNELS

1

Choose CH. Memory from the Channel menu options.

(Red arrow indicates selected highlighted option.)

2

Press the + key to select the channel number entry

area.

3

Enter the channel number you want to add or delete

(example): C34. For cable channels above 99, press

and hold the 1 key until C1– – appears. Then enter the

other two numbers.

4

Press the + key to change the present setting.

Example: Added will change to Deleted. This takes

about three seconds. During that time, the word

“Added” or “Deleted” will become white.

5

Use the 0~9 or  / keys to chose other channels to

delete or add, or press MENU key to exit.



Under weak stereo signal conditions, you may receive

better quality sound in the “Mono” position.



Surround sound expands the sound effect while

receiving MTS stereo signals.



Pressing the RESET key will clear all customized set-

tings. The TV will automatically start Channel Search

and clear settings.



Channels deleted from scan memory can be selected

with the number keys.



Restoring deleted channels, use the on-screen menu to

manually add channels or start CH. Search from the

menu. It make take a few minutes to search thru the

available channels. or press the RESET key.



SELECTING THE DISPLAY LANGUAGE

1

Choose English, Francais (French), or Espanol (Spanish) from

the Language menu options.

2

Use the / keys to select the desired language.

TV SET-UP

Use the following features to customize your LCD TV according to your

personal preference:

MENU ITEM FUNCTION

Color Enhancer Normal—highlights the picture flesh tones and color

highlights.

Warm—deepens the picture red tints.

Cool—highlights the picture blue tints.

Aspect Ratio Use this feature when equipment is connected to the

component input jacks:

The 4:3 setting is for normal viewing.

The 16:9 setting changes the picture image to wide-

screen viewing with minimal portion of top

and bottom compressed.

Back Light Power (energy) saving function—The picture image

and background automatically changes as follows:

Bright—High Power (default setting)

Middle—Mid Power

Dark—Lower Power

ADJUSTING THE SET UP FEATURES

1

Choose Color Enhancer, Aspect Ratio, or Back Light menu options.

2

Use the / keys to select the setting you want to change.

3

Use the – /+ keys to adjust settings.

16:9 Screen Format

14

Need help?

Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032

Captioning is text information transmitted along with the picture and sound so it can be displayed on the TV

screen. Because different types of captions can be transmitted with the TV signal, separate captioning modes

are provided. The captioning modes recognized by this model are: Caption1 and Caption2. Local broadcast-

ers decide which caption signals to transmit.

CAPTION1: This is the main mode used for program captioning (words match the program you are watch-

ing). These captions are generally one or two lines.

CAPTION2: This is an alternative mode for program captioning. Caption2

may be used by the broadcaster to provide captions in another language, such

as, Spanish or French.

QUIKCAP: Allows captions to toggle on and off with the Mute function.

Press the MUTE key on the remote control to block the TV sound; the cap-

tions display automatically. Press the MUTE key again to restore the sound,

the captions will disappear. Quikcap displays program captions in the

Caption1 mode.

SETTING CAPTIONS

1

Press the Caption key on the remote control.

2

Press the 0 key to select options: OFF, CAPTION1, CAPTION2, or Quikcap.

Note: Channel number will not display continuously when captioning is on.

Caption1/ 2

CLOSED-CAPTIONING

15

Need help?

Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032

NOTE: THIS FEATURE IS DESIGNED TO COMPLY WITH THE UNITED STATES OF AMERICA’S FCC V-CHIP

REGULATIONS. THEREFORE, IT MAY NOT FUNCTION WITH BROADCASTS THAT ORIGINATE IN OTHER

COUNTRIES.

This Sanyo television is equipped with an electronic V-Chip to interpret MPAA (Motion Picture Association of

America) and TV Parental Guidelines rating codes. When these codes are detected, the TV will automatically

display or block the program, depending upon choices you make when setting up the V-Guide system.

The V-Guide system contain both age-based and content-based settings. This gives parents discretionary ways

of choosing appropriate material for their children to view.

Content ratings are represented by the initials D (Suggestive Dialog), L (Adult Language), S (Sexual Situa-

tions), V (Violence), and FV (Fantasy Violence). When programming contains any or all of these conditions,

these letters become part of the icon that is displayed on the TV screen.

A rating icon will generally appear in the upper left hand corner of the TV screen (see page 18.)

Use this feature to supervise television viewing for young children. This television can be set to automatically

block programs with content you deem as inappropriate for your children to view.

The ability of the television to block the reception of specific programming content depends upon several

conditions: 1) The program must be rated, 2) Networks must broadcast the rating code data, 3) Cable com-

panies must transmit the rating code signal, and 4) The TV must be properly setup to decode the signal.

SETTING A RATING

1

Press the V-GUIDE key on the remote control to display menu.

2

Press the – /+ keys to switch V-Guide ON.

3

Press the + key to access Ratings: MPAA Ratings or TV Ratings.

( Arrow indicates selection.)

V-GUIDE (PARENTAL CONTROL) INFORMATION

V-GUIDE OPERATION



When in the V-Guide menu system, the

– /+

keys allow

you to navigate between the ratings and the options

menu.



Blocking TVY7 does not block higher ratings.



Y

ou can block a content rating such as TVPG-V and still

be able to watch TVPG programs with ratings of S-L-D

provided TVPG is unblocked (U).



To temporarily unblock or view Blocked (B) programs,

set V-GUide to OFF, or press the RESET key twice to

clear all Blocked (B) ratings and other customized

settings

.

16

Need help?

Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032

SETTING A MPAA MOVIE RATING

4

Use the / keys to block ratings: G, PG, PG-13, R, NC-17, and X.

5

Press the + key to set the BLOCKED rating. (√ Check mark indicates

Blocked rating.)

Note: The TV will automatically block (B) ratings above or unblock (U) ratings

below selection. For example, if you block rating R, NC17 and X will be

blocked as well.

TO CLEAR MPAA MOVIE RATINGS

(Repeat Steps 1 and 3 to display V-Guide menu, if needed.)

6

Use the  /  keys to highlight Clear.

7

Press the + key to clear all blocked ratings.

SETTING TV RATINGS

(Repeat Steps 1 and 3 to display V-Guide menu, if needed.)

8

Use the  /  keys to block TV ratings: TV-Y, TV-Y7, TV-G,

TV-PG, TV-14, TV-MA, or Content.

9

Press the + key to set the BLOCKED rating. (√ Check mark

indicates Blocked rating.)

SETTING CONTENT-BASED GUIDELINES

(Repeat Steps 1 and 3 to display V-Guide menu, if needed.)

1

0

Use the  /  keys to highlight Content options.

1

Press the + key to display the TV and Content Rating Options: Fantasy

Violence, Violence, Sexual Situations, Adult Language, Suggestive

Dialog.

1

2

Use the  /  keys to highlight the TV Rating (highlighted in

yellow). Then press the + key to block the content category (high-

lighted in white). Press + key again to Block or Unblock rating. Use

the  /  keys to highlight another rating.

1

3

Press the – key to return to the TV and Content Rating to block or

unblock other categories. Repeat step 11 to change other ratings.

Note: Networks and local

stations may or may

not include the

content ratings

portion of the TV

Parental Guidelines.

17

Need help?

Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032

TO CLEAR TV/CONTENT-BASED RATINGS

(Repeat Steps 1 and 3 to display V-Guide menu, if needed.)

1

4

Use the  /  keys to highlight Clear.

1

5

Press the + key to clear all blocked ratings.

TURNING OFF THE V-GUIDE

1

Press the V-GUIDE key.

2

Use the  /  keys to select V-Guide. Then press – /+ keys to select OFF.

ALL CHILDREN—Program is designed to be appro-

priate for children ages 2-6.

DIRECTED TO OLDER CHILDREN—Program is

designed for children 7 and above. Material may

include mild fantasy violence (FV) or comedic

violence.

GENERAL AUDIENCE—Program suitable for all

ages. Contain little or no violence, no strong

language or sexual dialogue or situations.

PARENTAL GUIDANCE SUGGESTED—Program con-

tains material that may be unsuitable for younger

children. Material contains one or more for the

following: moderate violence (V), some sexual situa-

tions (S), infrequent coarse language (L), or some

suggestive dialogue (D).

PARENTS STRONGLY CAUTIONED—Some material

is unsuitable for children under 14 years of age.

Parents are strongly urged to use cautions against

letting children that 14 watch unattended. Material

contains intense violence (V), intense sexual situa-

tions (S), strong coarse language (L), or intensely

suggestive dialogue (D).

MATURE AUDIENCE ONLY—Program is designed to

be viewed by adults and therefore may be unsuitable

for children under 17 years of age.

TV RATINGS (AGE/CONTENT-BASED)

G GENERAL AUDIENCES—All ages admitted.

PG PARENTAL GUIDANCE SUGGESTED—Some

material may not be suitable for children.

PG-13 PARENTAL GUIDANCE CAUTIONED—Some

material may be inappropriate for children

under 13.

R RESTRICTED—Under 17 requires accompany-

ing parent or adult guardian

NC17 NO ONE 17 AND UNDER ADMITTED

MPAA MOVIE RATINGS (AGE-BASED)

18

Need help?

Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032

V-GUIDE OPERATION (Continued)

Problem: Check these Conditions: Try these Solutions: Page No.

TV turns off

automatically.



Check signal (Cable/Ant.) connection.



Power surge protection feature.



Press POWER key.



The sleep timer may have been set.



Unplug TV momentarily.

5

No picture, poor

picture, or wavy

lines in picture.



Check antenna connections.



May be station trouble.



Brightness or Contrast misadjusted.



Possible interference from household

appliance.



Adjust antenna.



Try a different channel.



Select AUTO from Picture/Sound

on-screen menu or press RESET key.



Turn off Mixer, Drill, Blender, etc.

6, 11

No sound, poor

sound.

No sound on

some channels.



May be station trouble.



May be MUTE function.



Check Audio/ Video connections



Try a different channel.



Adjust Volume.

8~9

11

Picture too Bright

or too Dark.



Check Backlight (power energy

saving) settings.



Select Set-up Menu to set BACK

LIGHT option to Middle setting.

14

Cannot display

picture on a full

screen.



Check if Aspect Ratio setting is 16:9.



Select Set-up Menu to set ASPECT

RATIO option to 4:3 normal setting.

14

No Captioning.



Check if station is broadcasting a

Closed-Caption signal.



Press CAPTION key to select

Captioning.

15

Poor color or

no color.



Check if program is in color.



Check antenna connections.



Color or Tint misadjusted.



May be station trouble.



Try a different channel.



Adjust antenna.



Press RESET key to restart channel

search.

11

Blue Screen with

Video1, Video2, or

Component3

displayed.



Check Audio/Video connections.



Check external equipment.



Check external equipment setting.



check DVD setting.



Press INPUT key.



Switch on external equipment.



Set external equipment output con-

nections to match input connections.

8~10

No TV Stereo or

SAP sound.



Check if station is broadcasting a true

MTS stereo signal or a SAP signal.



Select STEREO or SAP from Audio on-

screen menu.

12

Cannot select or

scan some

channels.



Channel may be removed from

memory.



Check antenna connections.



V-Guide is set to block programming.



Select CH. SCAN MEMORY and

manually add channels or start

CH. (channel) search.



Set V-GUIDE to OFF or press RESET key

to clear all setting.

13

16~18

Remote Control

will not work TV.



Check batteries.



Check if TV is plugged in.



Check external equipment.



Replace batteries.



Aim remote control at front of TV.

6, 10

Menu System

words seem

misspelled.



May be a different language is

selected.



Reselect menu language choice using

the on-screen menu.

14

Cabinet makes

popping sound.



This is a normal condition during

warm-up and cool down of the plastic

cabinet parts.

Because of the Quality we build into our product, very few problems are actual TV defects. Most problems only involve

simple hookup or setup changes that can be solved by the customer. Please check the chart below and try the solutions listed

for your problem. If the problem still persists, before returning your TV, visit our website at www.sanyoctv.com or call us

toll free at 1.800.877.5032.

HELPFUL HINTS (Problems/Solutions)

19

Need help?

Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032

20

Need help?

Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032

IMPORTADOR:

COMERCIALIZADORA MEXICO

AMERICANA, S.DE R.L. DE C.V.

AV. NEXTENGO N

o

78

COL. SANTA CRUZ ACAYUCAN

DEL. AZCAPOTZALCO, MÉXICO, D.F. C.P. 02770

RFC: CMA9109119L0

GUARANTEE

THE APPARATUS THAT YOU HAVE ACQUIRED HAS A ONE YEAR GUARANTEE FOR MANUFACTURING DEFECTS AND

A ONE YEAR SERVICE WARRANTY FROM THE DATE OF PURCHASE GRANTED BY:

COMERCIALIZADORA MEXICO-AMERICANA, S. DE R.L. DE C.V.

UNDER THE FOLLOWING CONDITIONS:

1. TO MAKE THE GUARANTEE EFFECTIVE, SIMPLY SHOW THIS POLICY FILLED OUT BY THE STORE OR SUPPLIER

UNIT OR THIS SALES INVOICE, WITH THE APPARATUS IN ANY OF THE SERVICE CENTERS INDICATED ON THIS

GUARANTEE.

2. IF THE FAULT IS ATTRIBUTED TO A MANUFACTURING DEFECT, THE APPARATUS WILL BE REPLACED OR YOUR

MONEY REFUNDED. DURING THE 30 DAYS SUBSEQUENT TO THE PURCHASE THE GUARANTEE WILL BE VALID

AT THE STORE WERE THE APPARATUS WAS PURCHASED, PRESENTING THE ABOVE DOCUMENTS.

3. REPAIR TIME WILL NEVER BE MORE THAN 30 DAYS. IF THIS TIME HAS ELAPSED, AND THE PRODUCT ISN’T

REPAIRED, COMERCIALIZADORA MEXICO AMERICANA, S. DE R.L. DE C.V. WILL PROCEED TO EFFECTUATE

THE EXCHANGE FOR AN EQUIVALENT APPARATUS OR THE RETURN OF THE BUYING-SALE COST

RESPECTIVELY.

4. THIS GUARANTEE WILL COVER ITS TOTALITY OF PIECES, COMPONENTS AND SERVICE REPAIR OF PRODUCT,

AND THE RESPECTIVE COST OF TRANSPORTATION.

THIS GUARANTEE WILL

BE NULL AND VOID IN THE FOLLOWING CIRCUMSTANCES:

*

WHEN PRODUCT HAS BEEN USED IN A DIFFERENT CONDITION THAN ITS NORMAL USE.

*

WHEN PRODUCT HASN’T BEEN OPERATING CORRECTLY ACCORDING TO THE INSTRUCTIONS IN THIS MANUAL.

*

WHEN PRODUCT HAS BEEN CHANGED OR REPAIRED BY PERSONS NOT AUTHORIZED FROM THE

MANUFACTURER, IMPORTER, OR MERCHANT RESPONSIBLE RESPECTIVE.

CENTRO DE SERVICIO Y LUGAR DONDE OBTENER PARTES,

COMPONENTES, CONSUMIBLES Y ACCESORIOS:

SUCURSAL VALLEJO SUCURSAL MINERVA

Poniente 126 N

o

288 B Silos N

o

135, Col. Minerva

Col. Nueva Vallejo Deleg. Iztapalapa

México, D.F. México, D.F. 09810

Tels. 5567-5378 Tels. 5646-4551

5368-0105, 8589-8033 5646-4550

DESCRIPTION: ________________________________ BRAND: __________________ MODEL:__________________

CLIENT’S NAME: __________________________________________________________________________________

ADDRESS: ______________________________________________________________________________________

EXTERIOR NUMBER: _______________________ INTERIOR NUMBER: _______________________

SUB DIVISION: ____________________________________________ STATE/DELEGATION: _______________________

TELEPHONE: _____________________________________________

STAMP, DATE AND SIGNATURE

OF

STORE

DESCRIPTION: Television

BRAND: SANYO

MODELS: CLT1554

CLT2054

MEXICO GUARANTEE

La page est en cours de chargement...

Sanyo CLT-1554 Manuel utilisateur

Ce manuel convient également à

Sanyo CLT-1554 Manuel utilisateur

dans d''autres langues

Documents connexes